Commit Graph

13 Commits

Author SHA1 Message Date
Paul Mundt 63dc02bde6 sh: Kill off machvec IRQ hinting.
Everything is using sparseirq these days, so we have no need to
arbitrarily size nr_irqs ahead of time. The legacy IRQ pre-allocation
likewise has no meaning for us, so that's killed off too. We now depend
on nr_irqs expansion by the generic hardirq layer instead.

It's also worth noting that the majority of boards had completely bogus
values for their nr_irqs relative to their CPU and configurations, so
this ends up correcting behaviour for quite a few platforms.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-21 17:54:01 +09:00
Paul Mundt b6bd263397 sh: hp6xx evt2irq migration.
Migrate hp6xx to evt2irq backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-05-18 15:38:50 +09:00
Paul Mundt f03c4866d3 sh: fix up fallout from system.h disintegration.
Quite a bit of fallout all over the place, nothing terribly exciting.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-03-30 19:29:57 +09:00
Yong Zhang d11584a044 SH: irq: Remove IRQF_DISABLED
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled],
We run all interrupt handlers with interrupts disabled
and we even check and yell when an interrupt handler
returns with interrupts enabled (see commit [b738a50a:
genirq: Warn when handler enables interrupts]).

So now this flag is a NOOP and can be removed.

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-10-28 14:39:28 +09:00
Lionel Debroux 2f55ac072f suspend: constify platform_suspend_ops
While at it, fix two checkpatch errors.
Several non-const struct instances constified by this patch were added after
the introduction of platform_suspend_ops in checkpatch.pl's list of "should
be const" structs (79404849e9).

Patch against mainline.
Inspired by hunks of the grsecurity patch, updated for newer kernels.

Signed-off-by: Lionel Debroux <lionel_debroux@yahoo.fr>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-16 14:14:02 +01:00
Paul Mundt 9d56dd3b08 sh: Mass ctrl_in/outX to __raw_read/writeX conversion.
The old ctrl in/out routines are non-portable and unsuitable for
cross-platform use. While drivers/sh has already been sanitized, there
is still quite a lot of code that is not. This converts the arch/sh/ bits
over, which permits us to flag the routines as deprecated whilst still
building with -Werror for the architecture code, and to ensure that
future users are not added.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-26 12:58:40 +09:00
Rafael Ignacio Zurita 9dcaa7b25f ALSA: sh: add SuperH DAC audio driver for ALSA V4
This is a port of the sound/oss/sh_dac_audio.c driver.
The driver uses an on-chip 8-bit D/A converter, which has a speaker connected
to one of its channels, found in several ancient HP machines.
For interrupts it uses a high-resolution timer (hrtimer).
Tested on SH7709 based hp6xx (HP Jornada 680/690 and HP Palmtop 620lx/660lx).

Also, since OSS Emulation works, the old OSS sound/oss/sh_dac_audio.c driver
would be obsolete soon, and it could be removed.

Signed-off-by: Rafael Ignacio Zurita <rizurita@yahoo.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-11-04 09:17:40 +01:00
Rafael Ignacio Zurita 3bf509230a sh: fix the HD64461 level-triggered interrupts handling
Rework the hd64461 demuxer code to fix the HD64461 level-triggered
interrupts handling, using handle_level_irq() as needed.

Signed-off-by: Rafael Ignacio Zurita <rizurita@yahoo.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-20 18:57:48 +09:00
Magnus Damm 1d015cf02a sh: shared register saving code for sh3/sh4/sh4a
This patch reworks the sh3/sh4/sh4a register saving code in
the following ways:
 - break out prepare_stack_save_dsp() from handle_exception()
 - break out save_regs() from handle_exception()
 - the register saving order is unchanged
 - align new functions to fit in cache lines
 - separate exception code from interrupt code
 - keep main code flow in a single cache line per exception vector
 - use bsr/rts for regular functions (save pr first)
 - keep data in one shared cache line (exception_data)
 - document the functions
 - tie in the hp6xx code

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-02-27 16:26:10 +09:00
Paul Mundt 604437f0f8 sh: sh7785lcr/highlander/hp6xx need linux/irq.h.
More build fixes..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-21 17:43:25 +09:00
Magnus Damm 3e51762759 sh: move the hp6xx pm code
Move the not-so-generic pm code from arch/sh/kernel/pm.c to the
platform directory together with the rest of the hp6xx pm code.

This is done to let non-hp6xx platforms enable CONFIG_PM.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:43:52 +09:00
Paul Mundt 7639a4541f sh: Migrate common board headers to mach-common/.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-20 13:02:48 +09:00
Paul Mundt da2014a2b0 sh: Shuffle the board directories in to mach groups.
This flattens out the board directories in to individual mach groups,
we will use this for getting rid of unneeded directories, simplifying
the build system, and becoming more coherent with the refactored
arch/sh/include topology.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-29 21:01:19 +09:00