Commit Graph

21 Commits

Author SHA1 Message Date
Linus Walleij a8cb826aea sh: sdk7786-gpio: switch to gpiochip_add_data()
We're planning to remove the gpiochip_add() function to swith
to gpiochip_add_data() with NULL for data argument.

Cc: Paul Mundt <lethal@linux-sh.org>
Cc: linux-sh@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-30 10:53:44 +02:00
Alexandre Courbot 95188aaf9f sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB
SH GPIO drivers all use gpiolib and CONFIG_GENERIC_GPIO is only selected
through CONFIG_GPIOLIB, yet some compilation units depended on
CONFIG_GENERIC_GPIO. Make them depend on CONFIG_GPIOLIB instead since it
is more accurate and prepares us for the future removal of
CONFIG_GENERIC_GPIO.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-20 22:48:15 +09:00
Guennadi Liakhovetski 2fcfe22ae7 sh: add fixed voltage regulators to sdk7786
On sdk7786 provide a dummy regulator for the smsc911x driver.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-06-28 18:01:01 +09:00
Magnus Damm c953efdbb1 sh: board sh_clk_ops rename
Convert remaining sh board code to use sh_clk_ops.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-03-12 22:19:12 +01:00
Paul Mundt 7912825d8b sh: Tidy up pre-clkdev clk_get() error handling.
clk_get() used to return NULL or an errno value depending on whether a
clkdev lookup failed or a clock wasn't found in the primary clock list.
As these disjoint paths were unified and everything now is handled via
clkdev lookups, the NULL case never makes it out of clk_get(). Update
accordingly and always look to the errno value.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-24 17:36:23 +09:00
Nobuhiro Iwamatsu 95d210ce6b sh: Use device_initcall() instead of __initcall()
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-11 12:47:45 +09:00
Paul Mundt 3bd75e5e0c sh: mach-sdk7786: Fix up fallout from clkdev consolidation.
CC      arch/sh/boards/mach-sdk7786/setup.o
arch/sh/boards/mach-sdk7786/setup.c:179: error: variable 'sdk7786_pcie_cl' has initializer but incomplete type
arch/sh/boards/mach-sdk7786/setup.c:180: error: unknown field 'con_id' specified in initializer
arch/sh/boards/mach-sdk7786/setup.c:180: warning: excess elements in struct initializer
arch/sh/boards/mach-sdk7786/setup.c:180: warning: (near initialization for 'sdk7786_pcie_cl')
arch/sh/boards/mach-sdk7786/setup.c:181: error: unknown field 'clk' specified in initializer
arch/sh/boards/mach-sdk7786/setup.c:181: warning: excess elements in struct initializer
arch/sh/boards/mach-sdk7786/setup.c:181: warning: (near initialization for 'sdk7786_pcie_cl')
arch/sh/boards/mach-sdk7786/setup.c: In function 'sdk7786_clk_init':
arch/sh/boards/mach-sdk7786/setup.c:211: error: implicit declaration of function 'clkdev_add'

which is a fanciful way of saying that the struct definition moved from
asm/clkdev.h to linux/clkdev.h.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-07 11:07:30 +09:00
Paul Mundt 76496f8f2e sh: mach-sdk7786: Handle baseboard NMI source selection.
The on-board NMI switch is routed through and mangled by the FPGA prior
to its delivery to the NMI pin, so add some glue for the various
configuration options. The default is to unmask it and enable all input
sources.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-17 18:58:04 +09:00
Paul Mundt d8d6b902b8 sh: mach-sdk7786: Add support for the FPGA SRAM.
This ties in the 2KiB of FPGA SRAM in to the generic SRAM pool.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-15 02:13:04 +09:00
Paul Mundt b6b77b2d5f sh: pci: Support secondary FPGA-driven PCIe clocks on SDK7786.
The SDK7786 FPGA has secondary control over the PCIe clocks, specifically
relating to the slots and oscillator. This ties the FPGA clocks in to the
clock framework and balances the refcounting similar to how the primary
on-chip clocks are managed. While the on-chip clocks are per-port, the
FPGA clock enable/disable is global for the entire block.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-14 08:44:55 +09:00
Paul Mundt 47da88f366 sh: mach-sdk7786: Add support for fpga gpios.
The sdk7786 FPGA supports a number of user settable input switches that
are otherwise unused. This wires up a dummy gpio chip for the switch bank
to simply expose them to userspace.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-14 03:04:44 +09:00
Paul Mundt 3366e3585f sh: Move platform smp ops in to their own structure.
This cribs the MIPS plat_smp_ops approach for wrapping up the platform
ops. This will allow for mixing and matching different ops on the same
platform in the future.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-21 12:23:25 +09:00
Paul Mundt d9c944463d sh: mach-sdk7786: pm_power_off support.
This wires up power-off support for the SDK7786 board.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-19 16:27:47 +09:00
Paul Mundt d9116d07f6 sh: mach-sdk7786: Probe system FPGA area mapping.
This implements dynamic probing for the system FPGA. The system reset
controller contains a fixed magic read word in order to identify the
FPGA. This just utilizes a simple loop that scans across all of the fixed
physical areas (area 0 through area 6) to locate the FPGA.

The FPGA also contains register information detailing the area mappings
and chip select settings for all of the other blocks, so this needs to be
done before we can set up anything else.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-20 18:25:19 +09:00
Paul Mundt b51989b8af sh: mach-sdk7786: reset controller reboot support.
This wires up the machine_ops reboot call to use the system reset
controller.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-20 16:53:11 +09:00
Paul Mundt 5f240718b4 sh: mach-sdk7786: Split out FPGA IRQ controller setup.
This moves out the FPGA IRQ controller setup code to its own file, in
preparation for switching off of IRL mode and having it provide its own
irq_chip.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-20 15:23:54 +09:00
Paul Mundt efd590d57a sh: mach-sdk7786: FPGA updates.
This does a bit of refactoring of the FPGA management code. The primary
FPGA initialization is moved out to its own file in preparation for
implementing some of the more complex capabilities, a complete set of
register definitions is provided, and all of the existing users in the
board code are moved over to use the new interface instead of setting up
overlapping mappings. This also corrects the FPGA size, which previously
was chomped off at the SDIF control register.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-20 15:08:36 +09:00
Paul Mundt c809821827 sh: mach-sdk7786: Detect/configure/propagate EXTAL.
This uses the mode pins exposed through the FPGA to work out whether
we're driven from EXTAL or not and does the appropriate setup and
propagation through the clock framework.

This will also -EINVAL out for anyone adding in their own oscillators,
forcing proper configuration with the clock framework instead of
proceeding on with bogus clock values.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-19 19:38:36 +09:00
Paul Mundt 6f832e8aab sh: mach-sdk7786: mode pins support.
This wires up the mode pins support on the SDK7786. The pins are
standard SH7786 pins, and all are fixed in software. Needed for the
clock framework, PCIe, and so forth.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-15 16:31:04 +09:00
Paul Mundt 2267c7875b sh: mach-sdk7786: heartbeat support.
Hand off the user LEDs to the heartbeat driver.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-15 12:11:30 +09:00
Paul Mundt 02bf6cc72c sh: Preliminary SDK7786 board support.
This stubs in some preliminary board support for the RTE SDK7786.

This is quite stunted at the moment, and primarily builds on top of the
system FPGA. FPGA IRQs are handled via CPU IRL masking for simplicity,
with initial peripheral support restricted to the debug ethernet.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-14 20:58:58 +09:00