Commit Graph

294 Commits

Author SHA1 Message Date
Jan Scholz ee8a1a0a1a HID: Apple ALU wireless keyboards are bluetooth devices
While parsing 'hid_blacklist' in the apple alu wireless keyboard is not found.
This happens because in the blacklist it is declared with HID_USB_DEVICE
although the keyboards are really bluetooth devices.  The same holds for
'apple_devices' list.

This patch fixes it by changing HID_USB_DEVICE to HID_BLUETOOTH_DEVICE in those
two lists.

Signed-off-by: Jan Scholz <Scholz@fias.uni-frankfurt.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-28 15:09:26 +01:00
Jiri Slaby fde5be353e HID: remove setup mutex, fix possible deadlock
It causes recursive locking warning and is unneeded after
introduction of STARTED flag.

* Resume vs. stop is effectively solved by DISCONNECT flag.
* No problem in suspend vs. start -- urb is submitted even after open
  which is possible after connect which is called after start.
* Resume vs. start solved by STARTED flag.
* Suspend vs. stop -- no problem in killing urb and timer twice.

Reported-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-23 12:03:20 +01:00
Jiri Kosina 578f3a35fe HID: add USB ID for another dual gameron adapter
0x0810/0x0002 needs the very same handling as 0x0001.

Reported-by: Steve Conklin <sconklin@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-20 15:55:38 +01:00
Jiri Kosina 06d2148ed3 HID: unignore mouse on unibody macbooks
In commit a96d6ef34, the mouse interfaces on the unibody macbooks were
put into hid mouse ignore list. This was a little bit too premature
though, as the corresponding bcm5974 changes are scheduled for 2.6.29.

Remove these devices from the ignore list for now, in order to provide at
least basic functionality with the HID driver.

Will be reintroduced in 2.6.29

Reported-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-20 11:22:17 +01:00
Jiri Kosina 5181e59451 HID: fix blacklist entries for greenasia/pantherlord
Fix misplaced quirk entries for devices driven by hid-pl driver. The
devices shouls be only blacklisted by generic HID driver, not completely
ignored.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-17 01:44:38 +01:00
Jiri Slaby 131d3a7a00 HID: don't grab devices with no input
Some devices have no input interrupt endpoint. These won't be handled
by usbhid, but currently they are not refused and reside on hid bus.

Perform this checking earlier so that we refuse to control such
a device early enough (and not pass it to the hid bus at all).

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-14 14:10:01 +01:00
Alexey Klimov 62a56582e0 HID: fix radio-mr800 hidquirks
This patch fixes radio-mr800 hidqurks. Removes it from blacklist entry
and places it in ignore entry in hid/hid-core.c

Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-13 10:36:39 +01:00
Alexey Klimov c91c21c5a6 HID: fix kworld fm700 radio hidquirks
This patch fixes kworld fm700 usb-radio hidqurks that handled by
radio-si470x. Removes it from blacklist entry and places it in ignore
entry in hid/hid-core.c

The bug went in through the V4L/DVB tree by commit 6a13378a without
HID maintainer being involved at all.

Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-13 10:36:11 +01:00
Jiri Slaby e3e14de50d HID: fix start/stop cycle in usbhid driver
`stop' left out usbhid->urb* pointers and so the next `start' thought
it needs to allocate nothing and used the memory pointers previously
pointed to. This led to memory corruption and device malfunction.

Also don't forget to clear disconnect flag on start which was left set
by the previous `stop'.

This fixes

	echo DEVICE > /sys/bus/hid/drivers/DRIVER/unbind
	echo DEVICE > /sys/bus/hid/drivers/DRIVER/bind

failures.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-13 10:31:36 +01:00
Andi Kleen 43ff3a48c1 HID: use single threaded work queue for hid_compat
Use single threaded work queue for hid_compat

I doubt HID really needs to scale over multiple CPUs. So only use a
single threaded workqueue for HID_COMPAT. This avoids some excessive
thread use on systems with a larger number of CPUs.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-13 10:31:36 +01:00
Henrik Rydberg 437184ae8b HID: map macbook keys for "Expose" and "Dashboard"
On macbooks there are specific keys for the user-space functions Expose
and Dashboard, which currently has no counterpart in input.h. This patch
adds KEY_SCALE and KEY_DASHBOARD, and maps the keyboard accordingly.

Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-13 10:31:36 +01:00
Henrik Rydberg a96d6ef347 HID: support for new unibody macbooks
The unibody MacBook 5 and MacBook Pro 5 come with a new version of
the bcm5974 trackpad. This patch adds the USB device ids and all
the appropriate quirks, including hid_blacklist.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-13 10:31:36 +01:00
Oliver Neukum 7d672cd750 HID: fix locking in hidraw_open()
As open needs to sleep hidraw was wrong to call it with a spinlock held.
Furthermore, open can of course fail which needs to be handled.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-13 10:31:35 +01:00
Alexey Klimov 6a13378a56 V4L/DVB (9337a): HID: Don't allow KWorld radio fm700 be handled by usb hid drivers
This device is already handled by radio-si470x driver, and we
therefore want usbhid to ignore it.

Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Acked-by: Tobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11 08:09:43 -02:00
Al Viro 233e70f422 saner FASYNC handling on file close
As it is, all instances of ->release() for files that have ->fasync()
need to remember to evict file from fasync lists; forgetting that
creates a hole and we actually have a bunch that *does* forget.

So let's keep our lives simple - let __fput() check FASYNC in
file->f_flags and call ->fasync() there if it's been set.  And lose that
crap in ->release() instances - leaving it there is still valid, but we
don't have to bother anymore.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-01 09:49:46 -07:00
Alan Stern fa157bdfe8 HID: add quirk entry for no-name keyboard (0x13ba/0x0017)
This patch (as1157) adds a no-name PS/2-to-USB keyboard+mouse adapter
to the hid-dell driver.  (The device shows up with a Product string
saying "Generic USB K/B", nothing more.)  This will force an initial
"Set-LEDs" report to be sent to the device, without which it won't
send any keystroke information.  Several bug reports mentioning this
device have been filed in various forums; the patch should resolve
them.

This is just a temporary stop-gap for 2.6.28.  A later patch for
2.6.29 will introduce a more generic mechanism for "Set-LEDs", making
this change (and the entire hid-dell driver) unnecessary.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-30 01:06:13 +01:00
Jiri Slaby b170060c6c HID: sync on deleted io_retry timer in usbhid driver
When suspending, make sure that the timer is not running
any more.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-27 15:07:08 +01:00
Jiri Slaby 3d5afd324a HID: fix oops during suspend of unbound HID devices
Usbhid structure is allocated on start invoked only from probe
of some driver. When there is no driver, the structure is null
and causes null-dereference oopses.

Fix it by allocating the structure on probe and disconnect of
the device itself. Also make sure we won't race between start
and resume or stop and suspend respectively.

References: http://bugzilla.kernel.org/show_bug.cgi?id=11827

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Andreas Schwab <schwab@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-27 15:06:01 +01:00
Linus Torvalds ecc96e7920 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: Add support for Sony Vaio VGX-TP1E
  HID: fix lock imbalance in hiddev
  HID: fix lock imbalance in hidraw
  HID: fix hidbus/appletouch device binding regression
  HID: add hid_type to general hid struct
  HID: quirk for OLED devices present in ASUS G50/G70/G71
  HID: Remove "default m" for Thrustmaster and Zeroplus
  HID: fix hidraw_exit section mismatch
  HID: add support for another Gyration remote control
  Revert "HID: Invert HWHEEL mappings for some Logitech mice"
2008-10-26 16:34:14 -07:00
Jiri Kosina cc6e0bbb47 HID: Add support for Sony Vaio VGX-TP1E
The Sony Vaio VGX-TP1E multimedia PC has a wireless keyboard with
a touchpad.

The mouse pointer is wrongly declared as constant non-data variable, which make
HID code to completely ignore all the "Pointer" usages.
Fix the report descriptor before it enters the parser to contain touchpad
pointer description that is correctly parsable (declaring data rather than
constant).

Reported-by: Stefan Hundhammer <sh@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-23 12:58:38 +02:00
Jiri Slaby eb9910894d HID: fix lock imbalance in hiddev
Don't forget to unlock_kernel() in hiddev_ioctl_usage().
Added in 7961df1681
(HID: Switch hiddev to unlocked_ioctl).

Corresponing sparse warning:
drivers/hid/usbhid/hiddev.c:515:10: warning: context imbalance in 'hiddev_ioctl_usage': wrong count at exit
drivers/hid/usbhid/hiddev.c:515:10:    context 'kernel_lock': wanted 0, got 1

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-23 01:47:34 +02:00
Jiri Slaby 0f2c5945a9 HID: fix lock imbalance in hidraw
Add omitted unlock_kernel() to hidraw_ioctl().
Added in 979c407e3b
(HID: Push down BKL into ioctl handler in hidraw).

Corresponing sparse warning:
drivers/hid/hidraw.c:267:9: warning: context imbalance in 'hidraw_ioctl': wrong count at exit
drivers/hid/hidraw.c:267:9:    context 'kernel_lock': wanted 0, got 1

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-23 01:47:30 +02:00
Jiri Slaby b4d8e4736c HID: fix hidbus/appletouch device binding regression
The appletouch mouse devices are grabbed by the hid bus and not
released even if apple driver says ENODEV (as expected) -- these
are composite USB devices, for which we only ignore the mouse
interface. This is currently not handled by hidbus code properly.

Move the ignoring one level upper to forbid the hid layer to grab the
device.

Reported-by: Justin Mattock <justinmattock@gmail.com>
Reported-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-22 14:47:18 +02:00
Jiri Slaby a73a63701f HID: add hid_type to general hid struct
Add type to the hid structure to distinguish to which device type
(now only mouse) we are talking to. Needed for per device type ignore
list support.

Note: this patch leaves the type as unknown for bluetooth devices,
there is not support for this in the hidp code.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-22 14:45:11 +02:00
Jiri Kosina ac2d98998c HID: quirk for OLED devices present in ASUS G50/G70/G71
The new revision of OLED device (0x0b05/0x175b) found in ASUS G50/G70/G71
should be ignored the same way we currently do for 0x1726, so that asus_oled
driver can make use of the device.

Reported-by: Costin Grigoras <costin.grigoras@cern.ch>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-20 12:37:43 +02:00
Andi Kleen 550cb3c3c1 HID: Remove "default m" for Thrustmaster and Zeroplus
No reason at all to make these obscure drivers default m

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-19 20:34:31 +02:00
Greg Kroah-Hartman 46fcaec505 USB: remove warn macro from HID core
There were two stragglers that got missed in the last merge of the HID tree that forgot to change the warn() calls to dev_warn().  This patch fixes them up.

Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17 14:41:09 -07:00
Jiri Slaby 140ae3eb6f HID: fix hidraw_exit section mismatch
hidraw_exit() marked as __exit is called from __init function
from HID core. Remove the section placement from that function.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-17 18:08:22 +02:00
Jiri Kosina 1e09320673 HID: add support for another Gyration remote control
There is a slightly different Gyration remote control, which
requires the quirks we already have in place for the 0x0002 PID,
plus KEY_MEDIA mapping is different.

Reported-by: Marc Randolph <mrand@pobox.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-17 15:51:35 +02:00
Dan Nicholson 022b7024d4 Revert "HID: Invert HWHEEL mappings for some Logitech mice"
This reverts commit 740f370dc6.

It turned out to be correct in the first place: a positive value should
be sent when the wheel is moved to the right, and a negative value when
moved to the left. This is the behavior expected by the Xorg evdev
driver. I must have had a remapping somewhere else in my system when
originally testing this. Testing on another system shows that the
unpatched kernel is correct.

Here is a bug report from Mandriva that brought the problem to my
attention:

    https://qa.mandriva.com/show_bug.cgi?id=44309#c19

Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-17 11:55:44 +02:00
Linus Torvalds c813b4e16e Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (46 commits)
  UIO: Fix mapping of logical and virtual memory
  UIO: add automata sercos3 pci card support
  UIO: Change driver name of uio_pdrv
  UIO: Add alignment warnings for uio-mem
  Driver core: add bus_sort_breadthfirst() function
  NET: convert the phy_device file to use bus_find_device_by_name
  kobject: Cleanup kobject_rename and !CONFIG_SYSFS
  kobject: Fix kobject_rename and !CONFIG_SYSFS
  sysfs: Make dir and name args to sysfs_notify() const
  platform: add new device registration helper
  sysfs: use ilookup5() instead of ilookup5_nowait()
  PNP: create device attributes via default device attributes
  Driver core: make bus_find_device_by_name() more robust
  usb: turn dev_warn+WARN_ON combos into dev_WARN
  debug: use dev_WARN() rather than WARN_ON() in device_pm_add()
  debug: Introduce a dev_WARN() function
  sysfs: fix deadlock
  device model: Do a quickcheck for driver binding before doing an expensive check
  Driver core: Fix cleanup in device_create_vargs().
  Driver core: Clarify device cleanup.
  ...
2008-10-16 12:40:26 -07:00
Greg Kroah-Hartman a9b12619f7 device create: misc: convert device_create_drvdata to device_create
Now that device_create() has been audited, rename things back to the
original call to be sane.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-16 09:24:43 -07:00
Jarod Wilson 24c88eb671 HID: blacklist additional SoundGraph iMon LCD models
hid_ignore_list additions for more SoundGraph iMon LCD devices

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-16 01:26:43 +02:00
Jiri Kosina f0bd8e4326 HID: fix/improve help texts for quirk drivers
Update the help texts for the HID-quirk drivers, so that they are a little
bit more descriptive.

Also make some obsolete help descriptions up to date.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-16 01:25:15 +02:00
Jiri Kosina b36299bcc0 HID: fix default building of HID-quirk drivers
Commit 9be7bbd54d
(HID: build drivers for all quirky devices by default)
made a wrong assumption about select/depends interaction in Kconfig,
resulting in possibility of link failure with certain configuration
options.

Fix this by explicitly having all the quirk-drivers depend on
USB_HID, default to y and make the possibility to alter the
settings dependent on EBMEDDED.

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-16 01:18:54 +02:00
Jiri Kosina 9be7bbd54d HID: build drivers for all quirky devices by default
Once kernel configuration has CONFIG_HID turned on, let also all the
specialized drivers for quirky devices to be built (unless CONFIG_EMBEDDED is
specified), as usually users don't care that much which driver
gives them the functionality, but when they want generic support, they
probably want to have support for all the quirky devices as well.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:51:05 +02:00
Jiri Kosina df9bcace7b HID: add missing blacklist entry for Apple ATV ircontrol
This device is already handled by hid-apple driver, but the blacklist entry
was missing in generic driver.

Reported-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:51:04 +02:00
Mauro Carvalho Chehab a48c65b35a HID: add support for Bright ABNT2 brazilian device
This keyboard needs to reset the LEDS during probe.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:51:04 +02:00
Mauro Carvalho Chehab ffcf70fb06 HID: Don't let Avermedia Radio FM800 be handled by usb hid drivers
Based on an original patch from Alexey Klimov <klimov.linux@gmail.com>,
against kernel version 2.6.27.

This device is already handled by radio-mr800 driver, and we therefore
want usbhid not to touch it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:51:04 +02:00
Mauro Carvalho Chehab 0dc491682f HID: fix numlock led on Dell device 0x413c/0x2105
This keyboard needs to re-sync numlock after probing.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:51:03 +02:00
From: Greg Kroah-Hartman 7d89fe12bd HID: remove warn() macro from usb hid drivers
USB should not be having it's own printk macros, so remove warn() and
use the system-wide standard of dev_warn() wherever possible.  In the
few places that will not work out, use a basic printk().

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:51:03 +02:00
Greg Kroah-Hartman ddbe324919 HID: remove info() macro from usb HID drivers
USB should not be having it's own printk macros, so remove info() and
use the system-wide standard of dev_info() wherever possible.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:51:03 +02:00
Peter Korsgaard 0f492f2aa9 HID: add appletv IR receiver quirk
Similar to the existing IRCONTROL4 handling

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:51:02 +02:00
Anssi Hannula f129ea6d1e HID: fix a lockup regression when using force feedback on a PID device
Commit 8006479c9b introduced a spinlock in
input_dev->event_lock, which is locked when handling input events.
However, the hid-pidff driver sleeps when handling events as it waits for
reports being sent to the device before changing the report contents
again.
This causes a system lockup when trying to use force feedback with a PID
device, a regression introduced in 2.6.24 and 2.6.23.15.

Fix it by extracting the raw report data from struct hid_report
immediately when hid_submit_report() is called, therefore allowing
drivers to change the contents of struct hid_report immediately without
affecting the already-queued transfer.

In hid-pidff, re-add the removed usbhid_wait_io() to
pidff_erase_effect() instead, to prevent a full report queue from causing
the submission to fail, thus not freeing up device memory.
pidff_erase_effect() is not called while dev->event_lock is held.

Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:51:02 +02:00
Jiri Slaby 795750197f HID: convert to dev_* prints
Since we have a real device bound to a driver, we may use struct
device for printing. Use dev_* functions instead of printks in
4 drivers.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:51:01 +02:00
Jiri Slaby 76483cf4d0 HID: remove hid-ff
hid-ff.c now calls only pidff (generic driver), the special ones are now
in separate drivers. Invoke pidff on all non-special directly.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:51:01 +02:00
Jiri Slaby 987fbc1f7d HID: move zeroplus FF processing
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:51:01 +02:00
Jiri Slaby 10e41a711e HID: move thrustmaster FF processing
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:51:00 +02:00
Jiri Slaby 5f022298aa HID: move pantherlord FF processing
Move the force feedback processing into a separate module.

[jkosina@suse.cz: fix Kconfig texts a little bit]

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:51:00 +02:00
Jiri Kosina 2b107d629d HID: fix incorrent length condition in hidraw_write()
The bound check on the buffer length

	if (count > HID_MIN_BUFFER_SIZE)

is of course incorrent, the proper check is

	if (count > HID_MAX_BUFFER_SIZE)

Fix it.

Reported-by: Jerry Ryle <jerry@mindtribe.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:51:00 +02:00