Commit Graph

158 Commits

Author SHA1 Message Date
Martin Schwidefsky 0244ad004a Remove GENERIC_HARDIRQ config option
After the last architecture switched to generic hard irqs the config
options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code
for !CONFIG_GENERIC_HARDIRQS can be removed.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-13 15:09:52 +02:00
Paul Gortmaker 0db0628d90 kernel: delete __cpuinit usage from all core kernel files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

This removes all the uses of the __cpuinit macros from C files in
the core kernel directories (kernel, init, lib, mm, and include)
that don't really have a specific maintainer.

[1] https://lkml.org/lkml/2013/5/20/589

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-07-14 19:36:59 -04:00
Linus Torvalds a4883ef6af Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core irq changes from Ingo Molnar:
 "The main changes:

  - generic-irqchip driver additions, cleanups and fixes

  - 3 new irqchip drivers: ARMv7-M NVIC, TB10x and Marvell Orion SoCs

  - irq_get_trigger_type() simplification and cross-arch cleanup

  - various cleanups, simplifications

  - documentation updates"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
  softirq: Use _RET_IP_
  genirq: Add the generic chip to the genirq docbook
  genirq: generic-chip: Export some irq_gc_ functions
  genirq: Fix can_request_irq() for IRQs without an action
  irqchip: exynos-combiner: Staticize combiner_init
  irqchip: Add support for ARMv7-M NVIC
  irqchip: Add TB10x interrupt controller driver
  irqdomain: Use irq_get_trigger_type() to get IRQ flags
  MIPS: octeon: Use irq_get_trigger_type() to get IRQ flags
  arm: orion: Use irq_get_trigger_type() to get IRQ flags
  mfd: stmpe: use irq_get_trigger_type() to get IRQ flags
  mfd: twl4030-irq: Use irq_get_trigger_type() to get IRQ flags
  gpio: mvebu: Use irq_get_trigger_type() to get IRQ flags
  genirq: Add irq_get_trigger_type() to get IRQ flags
  genirq: Irqchip: document gcflags arg of irq_alloc_domain_generic_chips
  genirq: Set irq thread to RT priority on creation
  irqchip: Add support for Marvell Orion SoCs
  genirq: Add kerneldoc for irq_disable.
  genirq: irqchip: Add mask to block out invalid irqs
  genirq: Generic chip: Add linear irq domain support
  ...
2013-07-02 16:14:35 -07:00
Davidlohr Bueso d2e08473f2 softirq: Use _RET_IP_
Use the already defined macro to pass the function return address.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1367347569.1784.3.camel@buesod1.americas.hpqcorp.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-06-28 14:10:57 +02:00
Ben Greear 34376a50fb Fix lockup related to stop_machine being stuck in __do_softirq.
The stop machine logic can lock up if all but one of the migration
threads make it through the disable-irq step and the one remaining
thread gets stuck in __do_softirq.  The reason __do_softirq can hang is
that it has a bail-out based on jiffies timeout, but in the lockup case,
jiffies itself is not incremented.

To work around this, re-add the max_restart counter in __do_irq and stop
processing irqs after 10 restarts.

Thanks to Tejun Heo and Rusty Russell and others for helping me track
this down.

This was introduced in 3.9 by commit c10d73671a ("softirq: reduce
latencies").

It may be worth looking into ath9k to see if it has issues with its irq
handler at a later date.

The hang stack traces look something like this:

    ------------[ cut here ]------------
    WARNING: at kernel/watchdog.c:245 watchdog_overflow_callback+0x9c/0xa7()
    Watchdog detected hard LOCKUP on cpu 2
    Modules linked in: ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 nfsv4 auth_rpcgss nfs fscache nf_nat_ipv4 nf_nat veth 8021q garp stp mrp llc pktgen lockd sunrpc]
    Pid: 23, comm: migration/2 Tainted: G         C   3.9.4+ #11
    Call Trace:
     <NMI>   warn_slowpath_common+0x85/0x9f
      warn_slowpath_fmt+0x46/0x48
      watchdog_overflow_callback+0x9c/0xa7
      __perf_event_overflow+0x137/0x1cb
      perf_event_overflow+0x14/0x16
      intel_pmu_handle_irq+0x2dc/0x359
      perf_event_nmi_handler+0x19/0x1b
      nmi_handle+0x7f/0xc2
      do_nmi+0xbc/0x304
      end_repeat_nmi+0x1e/0x2e
     <<EOE>>
      cpu_stopper_thread+0xae/0x162
      smpboot_thread_fn+0x258/0x260
      kthread+0xc7/0xcf
      ret_from_fork+0x7c/0xb0
    ---[ end trace 4947dfa9b0a4cec3 ]---
    BUG: soft lockup - CPU#1 stuck for 22s! [migration/1:17]
    Modules linked in: ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 nfsv4 auth_rpcgss nfs fscache nf_nat_ipv4 nf_nat veth 8021q garp stp mrp llc pktgen lockd sunrpc]
    irq event stamp: 835637905
    hardirqs last  enabled at (835637904): __do_softirq+0x9f/0x257
    hardirqs last disabled at (835637905): apic_timer_interrupt+0x6d/0x80
    softirqs last  enabled at (5654720): __do_softirq+0x1ff/0x257
    softirqs last disabled at (5654725): irq_exit+0x5f/0xbb
    CPU 1
    Pid: 17, comm: migration/1 Tainted: G        WC   3.9.4+ #11 To be filled by O.E.M. To be filled by O.E.M./To be filled by O.E.M.
    RIP: tasklet_hi_action+0xf0/0xf0
    Process migration/1
    Call Trace:
     <IRQ>
      __do_softirq+0x117/0x257
      irq_exit+0x5f/0xbb
      smp_apic_timer_interrupt+0x8a/0x98
      apic_timer_interrupt+0x72/0x80
     <EOI>
      printk+0x4d/0x4f
      stop_machine_cpu_stop+0x22c/0x274
      cpu_stopper_thread+0xae/0x162
      smpboot_thread_fn+0x258/0x260
      kthread+0xc7/0xcf
      ret_from_fork+0x7c/0xb0

Signed-off-by: Ben Greear <greearb@candelatech.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Pekka Riikonen <priikone@iki.fi>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-10 17:46:57 -07:00
Linus Torvalds 534c97b095 Merge branch 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull 'full dynticks' support from Ingo Molnar:
 "This tree from Frederic Weisbecker adds a new, (exciting! :-) core
  kernel feature to the timer and scheduler subsystems: 'full dynticks',
  or CONFIG_NO_HZ_FULL=y.

  This feature extends the nohz variable-size timer tick feature from
  idle to busy CPUs (running at most one task) as well, potentially
  reducing the number of timer interrupts significantly.

  This feature got motivated by real-time folks and the -rt tree, but
  the general utility and motivation of full-dynticks runs wider than
  that:

   - HPC workloads get faster: CPUs running a single task should be able
     to utilize a maximum amount of CPU power.  A periodic timer tick at
     HZ=1000 can cause a constant overhead of up to 1.0%.  This feature
     removes that overhead - and speeds up the system by 0.5%-1.0% on
     typical distro configs even on modern systems.

   - Real-time workload latency reduction: CPUs running critical tasks
     should experience as little jitter as possible.  The last remaining
     source of kernel-related jitter was the periodic timer tick.

   - A single task executing on a CPU is a pretty common situation,
     especially with an increasing number of cores/CPUs, so this feature
     helps desktop and mobile workloads as well.

  The cost of the feature is mainly related to increased timer
  reprogramming overhead when a CPU switches its tick period, and thus
  slightly longer to-idle and from-idle latency.

  Configuration-wise a third mode of operation is added to the existing
  two NOHZ kconfig modes:

   - CONFIG_HZ_PERIODIC: [formerly !CONFIG_NO_HZ], now explicitly named
     as a config option.  This is the traditional Linux periodic tick
     design: there's a HZ tick going on all the time, regardless of
     whether a CPU is idle or not.

   - CONFIG_NO_HZ_IDLE: [formerly CONFIG_NO_HZ=y], this turns off the
     periodic tick when a CPU enters idle mode.

   - CONFIG_NO_HZ_FULL: this new mode, in addition to turning off the
     tick when a CPU is idle, also slows the tick down to 1 Hz (one
     timer interrupt per second) when only a single task is running on a
     CPU.

  The .config behavior is compatible: existing !CONFIG_NO_HZ and
  CONFIG_NO_HZ=y settings get translated to the new values, without the
  user having to configure anything.  CONFIG_NO_HZ_FULL is turned off by
  default.

  This feature is based on a lot of infrastructure work that has been
  steadily going upstream in the last 2-3 cycles: related RCU support
  and non-periodic cputime support in particular is upstream already.

  This tree adds the final pieces and activates the feature.  The pull
  request is marked RFC because:

   - it's marked 64-bit only at the moment - the 32-bit support patch is
     small but did not get ready in time.

   - it has a number of fresh commits that came in after the merge
     window.  The overwhelming majority of commits are from before the
     merge window, but still some aspects of the tree are fresh and so I
     marked it RFC.

   - it's a pretty wide-reaching feature with lots of effects - and
     while the components have been in testing for some time, the full
     combination is still not very widely used.  That it's default-off
     should reduce its regression abilities and obviously there are no
     known regressions with CONFIG_NO_HZ_FULL=y enabled either.

   - the feature is not completely idempotent: there is no 100%
     equivalent replacement for a periodic scheduler/timer tick.  In
     particular there's ongoing work to map out and reduce its effects
     on scheduler load-balancing and statistics.  This should not impact
     correctness though, there are no known regressions related to this
     feature at this point.

   - it's a pretty ambitious feature that with time will likely be
     enabled by most Linux distros, and we'd like you to make input on
     its design/implementation, if you dislike some aspect we missed.
     Without flaming us to crisp! :-)

  Future plans:

   - there's ongoing work to reduce 1Hz to 0Hz, to essentially shut off
     the periodic tick altogether when there's a single busy task on a
     CPU.  We'd first like 1 Hz to be exposed more widely before we go
     for the 0 Hz target though.

   - once we reach 0 Hz we can remove the periodic tick assumption from
     nr_running>=2 as well, by essentially interrupting busy tasks only
     as frequently as the sched_latency constraints require us to do -
     once every 4-40 msecs, depending on nr_running.

  I am personally leaning towards biting the bullet and doing this in
  v3.10, like the -rt tree this effort has been going on for too long -
  but the final word is up to you as usual.

  More technical details can be found in Documentation/timers/NO_HZ.txt"

* 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
  sched: Keep at least 1 tick per second for active dynticks tasks
  rcu: Fix full dynticks' dependency on wide RCU nocb mode
  nohz: Protect smp_processor_id() in tick_nohz_task_switch()
  nohz_full: Add documentation.
  cputime_nsecs: use math64.h for nsec resolution conversion helpers
  nohz: Select VIRT_CPU_ACCOUNTING_GEN from full dynticks config
  nohz: Reduce overhead under high-freq idling patterns
  nohz: Remove full dynticks' superfluous dependency on RCU tree
  nohz: Fix unavailable tick_stop tracepoint in dynticks idle
  nohz: Add basic tracing
  nohz: Select wide RCU nocb for full dynticks
  nohz: Disable the tick when irq resume in full dynticks CPU
  nohz: Re-evaluate the tick for the new task after a context switch
  nohz: Prepare to stop the tick on irq exit
  nohz: Implement full dynticks kick
  nohz: Re-evaluate the tick from the scheduler IPI
  sched: New helper to prevent from stopping the tick in full dynticks
  sched: Kick full dynticks CPU that have more than one task enqueued.
  perf: New helper to prevent full dynticks CPUs from stopping tick
  perf: Kick full dynticks CPU if events rotation is needed
  ...
2013-05-05 13:23:27 -07:00
Frederic Weisbecker c032862fba Merge commit '8700c95adb03' into timers/nohz
The full dynticks tree needs the latest RCU and sched
upstream updates in order to fix some dependencies.

Merge a common upstream merge point that has these
updates.

Conflicts:
	include/linux/perf_event.h
	kernel/rcutree.h
	kernel/rcutree_plugin.h

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2013-05-02 17:54:19 +02:00
liguang 3440a1ca99 kernel/smp.c: remove 'priv' of call_single_data
The 'priv' field is redundant; we can pass data via 'info'.

Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 17:04:03 -07:00
Frederic Weisbecker 67826eae8c nohz: Disable the tick when irq resume in full dynticks CPU
Eventually try to disable tick on irq exit, now that the
fundamental infrastructure is in place.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
2013-04-22 20:29:09 +02:00
Frederic Weisbecker 3451d0243c nohz: Rename CONFIG_NO_HZ to CONFIG_NO_HZ_COMMON
We are planning to convert the dynticks Kconfig options layout
into a choice menu. The user must be able to easily pick
any of the following implementations: constant periodic tick,
idle dynticks, full dynticks.

As this implies a mutual exclusion, the two dynticks implementions
need to converge on the selection of a common Kconfig option in order
to ease the sharing of a common infrastructure.

It would thus seem pretty natural to reuse CONFIG_NO_HZ to
that end. It already implements all the idle dynticks code
and the full dynticks depends on all that code for now.
So ideally the choice menu would propose CONFIG_NO_HZ_IDLE and
CONFIG_NO_HZ_EXTENDED then both would select CONFIG_NO_HZ.

On the other hand we want to stay backward compatible: if
CONFIG_NO_HZ is set in an older config file, we want to
enable CONFIG_NO_HZ_IDLE by default.

But we can't afford both at the same time or we run into
a circular dependency:

1) CONFIG_NO_HZ_IDLE and CONFIG_NO_HZ_EXTENDED both select
   CONFIG_NO_HZ
2) If CONFIG_NO_HZ is set, we default to CONFIG_NO_HZ_IDLE

We might be able to support that from Kconfig/Kbuild but it
may not be wise to introduce such a confusing behaviour.

So to solve this, create a new CONFIG_NO_HZ_COMMON option
which gathers the common code between idle and full dynticks
(that common code for now is simply the idle dynticks code)
and select it from their referring Kconfig.

Then we'll later create CONFIG_NO_HZ_IDLE and map CONFIG_NO_HZ
to it for backward compatibility.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
2013-04-03 13:56:03 +02:00
Linus Torvalds e3b59518c1 Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes and cleanups from Thomas Gleixner:
 "Commit e5ab012c32 ("nohz: Make tick_nohz_irq_exit() irq safe") is
  the first commit in the series and the minimal necessary bugfix, which
  needs to go back into stable.

  The remanining commits enforce irq disabling in irq_exit(), sanitize
  the hardirq/softirq preempt count transition and remove a bunch of no
  longer necessary conditionals."

I personally love getting rid of the very subtle and confusing
IRQ_EXIT_OFFSET thing.  Even apart from the whole "more lines removed
than added" thing.

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irq: Don't re-enable interrupts at the end of irq_exit
  irq: Remove IRQ_EXIT_OFFSET workaround
  Revert "nohz: Make tick_nohz_irq_exit() irq safe"
  irq: Sanitize invoke_softirq
  irq: Ensure irq_exit() code runs with interrupts disabled
  nohz: Make tick_nohz_irq_exit() irq safe
2013-03-05 18:10:04 -08:00
Frederic Weisbecker 4cd5d1115c irq: Don't re-enable interrupts at the end of irq_exit
Commit 74eed0163d
"irq: Ensure irq_exit() code runs with interrupts disabled"
restore interrupts flags in the end of irq_exit() for archs
that don't define __ARCH_IRQ_EXIT_IRQS_DISABLED.

However always returning from irq_exit() with interrupts
disabled should not be a problem for these archs. Prior to
this commit this was already happening anytime we processed
pending softirqs anyway.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2013-02-28 20:00:43 +01:00
Frederic Weisbecker 4d4c4e24cf irq: Remove IRQ_EXIT_OFFSET workaround
The IRQ_EXIT_OFFSET trick was used to make sure the irq
doesn't get preempted after we substract the HARDIRQ_OFFSET
until we are entirely done with any code in irq_exit().

This workaround was necessary because some archs may call
irq_exit() with irqs enabled and there is still some code
in the end of this function that is not covered by the
HARDIRQ_OFFSET but want to stay non-preemptible.

Now that irq are always disabled in irq_exit(), the whole code
is guaranteed not to be preempted. We can thus remove this hack.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2013-02-22 00:05:07 +01:00
Thomas Gleixner facd8b80c6 irq: Sanitize invoke_softirq
With the irq protection in irq_exit, we can remove the #ifdeffery and
the bh_disable/enable dance in invoke_softirq()

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linuxfoundation.org>
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1302202155320.22263@ionos
2013-02-21 20:52:24 +01:00
Thomas Gleixner 74eed0163d irq: Ensure irq_exit() code runs with interrupts disabled
We had already a few problems with code called from irq_exit() when
interrupted from a nesting interrupt. This can happen on architectures
which do not define __ARCH_IRQ_EXIT_IRQS_DISABLED.

__ARCH_IRQ_EXIT_IRQS_DISABLED should go away and we want to make it
mandatory to call irq_exit() with interrupts disabled.

As a temporary protection disable interrupts for those architectures
which do not define __ARCH_IRQ_EXIT_IRQS_DISABLED and add a WARN_ONCE
when an architecture which defines __ARCH_IRQ_EXIT_IRQS_DISABLED calls
irq_exit() with interrupts enabled.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linuxfoundation.org>
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1302202155320.22263@ionos
2013-02-21 20:52:24 +01:00
Linus Torvalds a0b1c42951 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking update from David Miller:

 1) Checkpoint/restarted TCP sockets now can properly propagate the TCP
    timestamp offset.  From Andrey Vagin.

 2) VMWARE VM VSOCK layer, from Andy King.

 3) Much improved support for virtual functions and SR-IOV in bnx2x,
    from Ariel ELior.

 4) All protocols on ipv4 and ipv6 are now network namespace aware, and
    all the compatability checks for initial-namespace-only protocols is
    removed.  Thanks to Tom Parkin for helping deal with the last major
    holdout, L2TP.

 5) IPV6 support in netpoll and network namespace support in pktgen,
    from Cong Wang.

 6) Multiple Registration Protocol (MRP) and Multiple VLAN Registration
    Protocol (MVRP) support, from David Ward.

 7) Compute packet lengths more accurately in the packet scheduler, from
    Eric Dumazet.

 8) Use per-task page fragment allocator in skb_append_datato_frags(),
    also from Eric Dumazet.

 9) Add support for connection tracking labels in netfilter, from
    Florian Westphal.

10) Fix default multicast group joining on ipv6, and add anti-spoofing
    checks to 6to4 and 6rd.  From Hannes Frederic Sowa.

11) Make ipv4/ipv6 fragmentation memory limits more reasonable in modern
    times, rearrange inet frag datastructures for better cacheline
    locality, and move more operations outside of locking.  From Jesper
    Dangaard Brouer.

12) Instead of strict master <--> slave relationships, allow arbitrary
    scenerios with "upper device lists".  From Jiri Pirko.

13) Improve rate limiting accuracy in TBF and act_police, also from Jiri
    Pirko.

14) Add a BPF filter netfilter match target, from Willem de Bruijn.

15) Orphan and delete a bunch of pre-historic networking drivers from
    Paul Gortmaker.

16) Add TSO support for GRE tunnels, from Pravin B SHelar.  Although
    this still needs some minor bug fixing before it's %100 correct in
    all cases.

17) Handle unresolved IPSEC states like ARP, with a resolution packet
    queue.  From Steffen Klassert.

18) Remove TCP Appropriate Byte Count support (ABC), from Stephen
    Hemminger.  This was long overdue.

19) Support SO_REUSEPORT, from Tom Herbert.

20) Allow locking a socket BPF filter, so that it cannot change after a
    process drops capabilities.

21) Add VLAN filtering to bridge, from Vlad Yasevich.

22) Bring ipv6 on-par with ipv4 and do not cache neighbour entries in
    the ipv6 routes, from YOSHIFUJI Hideaki.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1538 commits)
  ipv6: fix race condition regarding dst->expires and dst->from.
  net: fix a wrong assignment in skb_split()
  ip_gre: remove an extra dst_release()
  ppp: set qdisc_tx_busylock to avoid LOCKDEP splat
  atl1c: restore buffer state
  net: fix a build failure when !CONFIG_PROC_FS
  net: ipv4: fix waring -Wunused-variable
  net: proc: fix build failed when procfs is not configured
  Revert "xen: netback: remove redundant xenvif_put"
  net: move procfs code to net/core/net-procfs.c
  qmi_wwan, cdc-ether: add ADU960S
  bonding: set sysfs device_type to 'bond'
  bonding: fix bond_release_all inconsistencies
  b44: use netdev_alloc_skb_ip_align()
  xen: netback: remove redundant xenvif_put
  net: fec: Do a sanity check on the gpio number
  ip_gre: propogate target device GSO capability to the tunnel device
  ip_gre: allow CSUM capable devices to handle packets
  bonding: Fix initialize after use for 3ad machine state spinlock
  bonding: Fix race condition between bond_enslave() and bond_3ad_update_lacp_rate()
  ...
2013-02-20 18:58:50 -08:00
Frederic Weisbecker 6a61671bb2 cputime: Safely read cputime of full dynticks CPUs
While remotely reading the cputime of a task running in a
full dynticks CPU, the values stored in utime/stime fields
of struct task_struct may be stale. Its values may be those
of the last kernel <-> user transition time snapshot and
we need to add the tickless time spent since this snapshot.

To fix this, flush the cputime of the dynticks CPUs on
kernel <-> user transition and record the time / context
where we did this. Then on top of this snapshot and the current
time, perform the fixup on the reader side from task_times()
accessors.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
[fixed kvm module related build errors]
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
2013-01-27 20:35:47 +01:00
Eric Dumazet c10d73671a softirq: reduce latencies
In various network workloads, __do_softirq() latencies can be up
to 20 ms if HZ=1000, and 200 ms if HZ=100.

This is because we iterate 10 times in the softirq dispatcher,
and some actions can consume a lot of cycles.

This patch changes the fallback to ksoftirqd condition to :

- A time limit of 2 ms.
- need_resched() being set on current task

When one of this condition is met, we wakeup ksoftirqd for further
softirq processing if we still have pending softirqs.

Using need_resched() as the only condition can trigger RCU stalls,
as we can keep BH disabled for too long.

I ran several benchmarks and got no significant difference in
throughput, but a very significant reduction of latencies (one order
of magnitude) :

In following bench, 200 antagonist "netperf -t TCP_RR" are started in
background, using all available cpus.

Then we start one "netperf -t TCP_RR", bound to the cpu handling the NIC
IRQ (hard+soft)

Before patch :

# netperf -H 7.7.7.84 -t TCP_RR -T2,2 -- -k
RT_LATENCY,MIN_LATENCY,MAX_LATENCY,P50_LATENCY,P90_LATENCY,P99_LATENCY,MEAN_LATENCY,STDDEV_LATENCY
MIGRATED TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET
to 7.7.7.84 () port 0 AF_INET : first burst 0 : cpu bind
RT_LATENCY=550110.424
MIN_LATENCY=146858
MAX_LATENCY=997109
P50_LATENCY=305000
P90_LATENCY=550000
P99_LATENCY=710000
MEAN_LATENCY=376989.12
STDDEV_LATENCY=184046.92

After patch :

# netperf -H 7.7.7.84 -t TCP_RR -T2,2 -- -k
RT_LATENCY,MIN_LATENCY,MAX_LATENCY,P50_LATENCY,P90_LATENCY,P99_LATENCY,MEAN_LATENCY,STDDEV_LATENCY
MIGRATED TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET
to 7.7.7.84 () port 0 AF_INET : first burst 0 : cpu bind
RT_LATENCY=40545.492
MIN_LATENCY=9834
MAX_LATENCY=78366
P50_LATENCY=33583
P90_LATENCY=59000
P99_LATENCY=69000
MEAN_LATENCY=38364.67
STDDEV_LATENCY=12865.26

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Miller <davem@davemloft.net>
Cc: Tom Herbert <therbert@google.com>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-10 15:33:01 -08:00
Frederic Weisbecker fa5058f3b6 cputime: Specialize irq vtime hooks
With CONFIG_VIRT_CPU_ACCOUNTING, when vtime_account()
is called in irq entry/exit, we perform a check on the
context: if we are interrupting the idle task we
account the pending cputime to idle, otherwise account
to system time or its sub-areas: tsk->stime, hardirq time,
softirq time, ...

However this check for idle only concerns the hardirq entry
and softirq entry:

* Hardirq may directly interrupt the idle task, in which case
we need to flush the pending CPU time to idle.

* The idle task may be directly interrupted by a softirq if
it calls local_bh_enable(). There is probably no such call
in any idle task but we need to cover every case. Ksoftirqd
is not concerned because the idle time is flushed on context
switch and softirq in the end of hardirq have the idle time
already flushed from the hardirq entry.

In the other cases we always account to system/irq time:

* On hardirq exit we account the time to hardirq time.
* On softirq exit we account the time to softirq time.

To optimize this and avoid the indirect call to vtime_account()
and the checks it performs, specialize the vtime irq APIs and
only perform the check on irq entry. Irq exit can directly call
vtime_account_system().

CONFIG_IRQ_TIME_ACCOUNTING behaviour doesn't change and directly
maps to its own vtime_account() implementation. One may want
to take benefits from the new APIs to optimize irq time accounting
as well in the future.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-10-29 21:31:32 +01:00
Linus Torvalds 0b981cb94b Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler changes from Ingo Molnar:
 "Continued quest to clean up and enhance the cputime code by Frederic
  Weisbecker, in preparation for future tickless kernel features.

  Other than that, smallish changes."

Fix up trivial conflicts due to additions next to each other in arch/{x86/}Kconfig

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  cputime: Make finegrained irqtime accounting generally available
  cputime: Gather time/stats accounting config options into a single menu
  ia64: Reuse system and user vtime accounting functions on task switch
  ia64: Consolidate user vtime accounting
  vtime: Consolidate system/idle context detection
  cputime: Use a proper subsystem naming for vtime related APIs
  sched: cpu_power: enable ARCH_POWER
  sched/nohz: Clean up select_nohz_load_balancer()
  sched: Fix load avg vs. cpu-hotplug
  sched: Remove __ARCH_WANT_INTERRUPTS_ON_CTXSW
  sched: Fix nohz_idle_balance()
  sched: Remove useless code in yield_to()
  sched: Add time unit suffix to sched sysctl knobs
  sched/debug: Limit sd->*_idx range on sysctl
  sched: Remove AFFINE_WAKEUPS feature flag
  s390: Remove leftover account_tick_vtime() header
  cputime: Consolidate vtime handling on context switch
  sched: Move cputime code to its own file
  cputime: Generalize CONFIG_VIRT_CPU_ACCOUNTING
  tile: Remove SD_PREFER_LOCAL leftover
  ...
2012-10-01 10:43:39 -07:00
Frederic Weisbecker bf9fae9f5e cputime: Use a proper subsystem naming for vtime related APIs
Use a naming based on vtime as a prefix for virtual based
cputime accounting APIs:

- account_system_vtime() -> vtime_account()
- account_switch_vtime() -> vtime_task_switch()

It makes it easier to allow for further declension such
as vtime_account_system(), vtime_account_idle(), ... if we
want to find out the context we account to from generic code.

This also make it better to know on which subsystem these APIs
refer to.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
2012-09-25 15:31:31 +02:00
Thomas Gleixner 3e339b5dae softirq: Use hotplug thread infrastructure
[ paulmck: Call rcu_note_context_switch() with interrupts enabled. ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20120716103948.456416747@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-08-13 17:01:07 +02:00
Mel Gorman 907aed48f6 mm: allow PF_MEMALLOC from softirq context
This is needed to allow network softirq packet processing to make use of
PF_MEMALLOC.

Currently softirq context cannot use PF_MEMALLOC due to it not being
associated with a task, and therefore not having task flags to fiddle with
- thus the gfp to alloc flag mapping ignores the task flags when in
interrupts (hard or soft) context.

Allowing softirqs to make use of PF_MEMALLOC therefore requires some
trickery.  This patch borrows the task flags from whatever process happens
to be preempted by the softirq.  It then modifies the gfp to alloc flags
mapping to not exclude task flags in softirq context, and modify the
softirq code to save, clear and restore the PF_MEMALLOC flag.

The save and clear, ensures the preempted task's PF_MEMALLOC flag doesn't
leak into the softirq.  The restore ensures a softirq's PF_MEMALLOC flag
cannot leak back into the preempted process.  This should be safe due to
the following reasons

Softirqs can run on multiple CPUs sure but the same task should not be
	executing the same softirq code. Neither should the softirq
	handler be preempted by any other softirq handler so the flags
	should not leak to an unrelated softirq.

Softirqs re-enable hardware interrupts in __do_softirq() so can be
	preempted by hardware interrupts so PF_MEMALLOC is inherited
	by the hard IRQ. However, this is similar to a process in
	reclaim being preempted by a hardirq. While PF_MEMALLOC is
	set, gfp_to_alloc_flags() distinguishes between hard and
	soft irqs and avoids giving a hardirq the ALLOC_NO_WATERMARKS
	flag.

If the softirq is deferred to ksoftirq then its flags may be used
        instead of a normal tasks but as the softirq cannot be preempted,
        the PF_MEMALLOC flag does not leak to other code by accident.

[davem@davemloft.net: Document why PF_MEMALLOC is safe]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: David Miller <davem@davemloft.net>
Cc: Neil Brown <neilb@suse.de>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 18:42:45 -07:00
Linus Torvalds 161f7a7161 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer changes for v3.4 from Ingo Molnar

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
  ntp: Fix integer overflow when setting time
  math: Introduce div64_long
  cs5535-clockevt: Allow the MFGPT IRQ to be shared
  cs5535-clockevt: Don't ignore MFGPT on SMP-capable kernels
  x86/time: Eliminate unused irq0_irqs counter
  clocksource: scx200_hrt: Fix the build
  x86/tsc: Reduce the TSC sync check time for core-siblings
  timer: Fix bad idle check on irq entry
  nohz: Remove ts->Einidle checks before restarting the tick
  nohz: Remove update_ts_time_stat from tick_nohz_start_idle
  clockevents: Leave the broadcast device in shutdown mode when not needed
  clocksource: Load the ACPI PM clocksource asynchronously
  clocksource: scx200_hrt: Convert scx200 to use clocksource_register_hz
  clocksource: Get rid of clocksource_calc_mult_shift()
  clocksource: dbx500: convert to clocksource_register_hz()
  clocksource: scx200_hrt:  use pr_<level> instead of printk
  time: Move common updates to a function
  time: Reorder so the hot data is together
  time: Remove most of xtime_lock usage in timekeeping.c
  ntp: Add ntp_lock to replace xtime_locking
  ...
2012-03-20 10:32:09 -07:00
Linus Torvalds 2ba68940c8 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler changes for v3.4 from Ingo Molnar

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
  printk: Make it compile with !CONFIG_PRINTK
  sched/x86: Fix overflow in cyc2ns_offset
  sched: Fix nohz load accounting -- again!
  sched: Update yield() docs
  printk/sched: Introduce special printk_sched() for those awkward moments
  sched/nohz: Correctly initialize 'next_balance' in 'nohz' idle balancer
  sched: Cleanup cpu_active madness
  sched: Fix load-balance wreckage
  sched: Clean up parameter passing of proc_sched_autogroup_set_nice()
  sched: Ditch per cgroup task lists for load-balancing
  sched: Rename load-balancing fields
  sched: Move load-balancing arguments into helper struct
  sched/rt: Do not submit new work when PI-blocked
  sched/rt: Prevent idle task boosting
  sched/wait: Add __wake_up_all_locked() API
  sched/rt: Document scheduler related skip-resched-check sites
  sched/rt: Use schedule_preempt_disabled()
  sched/rt: Add schedule_preempt_disabled()
  sched/rt: Do not throttle when PI boosting
  sched/rt: Keep period timer ticking when rt throttling is active
  ...
2012-03-20 10:31:44 -07:00
Linus Torvalds 9c2b957db1 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events changes for v3.4 from Ingo Molnar:

 - New "hardware based branch profiling" feature both on the kernel and
   the tooling side, on CPUs that support it.  (modern x86 Intel CPUs
   with the 'LBR' hardware feature currently.)

   This new feature is basically a sophisticated 'magnifying glass' for
   branch execution - something that is pretty difficult to extract from
   regular, function histogram centric profiles.

   The simplest mode is activated via 'perf record -b', and the result
   looks like this in perf report:

	$ perf record -b any_call,u -e cycles:u branchy

	$ perf report -b --sort=symbol
	    52.34%  [.] main                   [.] f1
	    24.04%  [.] f1                     [.] f3
	    23.60%  [.] f1                     [.] f2
	     0.01%  [k] _IO_new_file_xsputn    [k] _IO_file_overflow
	     0.01%  [k] _IO_vfprintf_internal  [k] _IO_new_file_xsputn
	     0.01%  [k] _IO_vfprintf_internal  [k] strchrnul
	     0.01%  [k] __printf               [k] _IO_vfprintf_internal
	     0.01%  [k] main                   [k] __printf

   This output shows from/to branch columns and shows the highest
   percentage (from,to) jump combinations - i.e.  the most likely taken
   branches in the system.  "branches" can also include function calls
   and any other synchronous and asynchronous transitions of the
   instruction pointer that are not 'next instruction' - such as system
   calls, traps, interrupts, etc.

   This feature comes with (hopefully intuitive) flat ascii and TUI
   support in perf report.

 - Various 'perf annotate' visual improvements for us assembly junkies.
   It will now recognize function calls in the TUI and by hitting enter
   you can follow the call (recursively) and back, amongst other
   improvements.

 - Multiple threads/processes recording support in perf record, perf
   stat, perf top - which is activated via a comma-list of PIDs:

	perf top -p 21483,21485
	perf stat -p 21483,21485 -ddd
	perf record -p 21483,21485

 - Support for per UID views, via the --uid paramter to perf top, perf
   report, etc.  For example 'perf top --uid mingo' will only show the
   tasks that I am running, excluding other users, root, etc.

 - Jump label restructurings and improvements - this includes the
   factoring out of the (hopefully much clearer) include/linux/static_key.h
   generic facility:

	struct static_key key = STATIC_KEY_INIT_FALSE;

	...

	if (static_key_false(&key))
	        do unlikely code
	else
	        do likely code

	...
	static_key_slow_inc();
	...
	static_key_slow_inc();
	...

   The static_key_false() branch will be generated into the code with as
   little impact to the likely code path as possible.  the
   static_key_slow_*() APIs flip the branch via live kernel code patching.

   This facility can now be used more widely within the kernel to
   micro-optimize hot branches whose likelihood matches the static-key
   usage and fast/slow cost patterns.

 - SW function tracer improvements: perf support and filtering support.

 - Various hardenings of the perf.data ABI, to make older perf.data's
   smoother on newer tool versions, to make new features integrate more
   smoothly, to support cross-endian recording/analyzing workflows
   better, etc.

 - Restructuring of the kprobes code, the splitting out of 'optprobes',
   and a corner case bugfix.

 - Allow the tracing of kernel console output (printk).

 - Improvements/fixes to user-space RDPMC support, allowing user-space
   self-profiling code to extract PMU counts without performing any
   system calls, while playing nice with the kernel side.

 - 'perf bench' improvements

 - ... and lots of internal restructurings, cleanups and fixes that made
   these features possible.  And, as usual this list is incomplete as
   there were also lots of other improvements

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (120 commits)
  perf report: Fix annotate double quit issue in branch view mode
  perf report: Remove duplicate annotate choice in branch view mode
  perf/x86: Prettify pmu config literals
  perf report: Enable TUI in branch view mode
  perf report: Auto-detect branch stack sampling mode
  perf record: Add HEADER_BRANCH_STACK tag
  perf record: Provide default branch stack sampling mode option
  perf tools: Make perf able to read files from older ABIs
  perf tools: Fix ABI compatibility bug in print_event_desc()
  perf tools: Enable reading of perf.data files from different ABI rev
  perf: Add ABI reference sizes
  perf report: Add support for taken branch sampling
  perf record: Add support for sampling taken branch
  perf tools: Add code to support PERF_SAMPLE_BRANCH_STACK
  x86/kprobes: Split out optprobe related code to kprobes-opt.c
  x86/kprobes: Fix a bug which can modify kernel code permanently
  x86/kprobes: Fix instruction recovery on optimized path
  perf: Add callback to flush branch_stack on context switch
  perf: Disable PERF_SAMPLE_BRANCH_* when not supported
  perf/x86: Add LBR software filter support for Intel CPUs
  ...
2012-03-20 10:29:15 -07:00
Heiko Carstens b2a0017861 softirq: Reduce invoke_softirq() code duplication
The two invoke_softirq() variants are identical except for a single
line. So move the #ifdef __ARCH_IRQ_EXIT_IRQS_DISABLED inside one of
the functions and get rid of the other one.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-03-06 13:33:27 +01:00
Thomas Gleixner ba74c1448f sched/rt: Document scheduler related skip-resched-check sites
Create a distinction between scheduler related preempt_enable_no_resched()
calls and the nearly one hundred other places in the kernel that do not
want to reschedule, for one reason or another.

This distinction matters for -rt, where the scheduler and the non-scheduler
preempt models (and checks) are different. For upstream it's purely
documentational.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/n/tip-gs88fvx2mdv5psnzxnv575ke@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-01 10:28:04 +01:00
Thomas Gleixner bd2f55361f sched/rt: Use schedule_preempt_disabled()
Coccinelle based conversion.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-24swm5zut3h9c4a6s46x8rws@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-01 10:28:03 +01:00
Frederic Weisbecker 0a8a2e78b7 timer: Fix bad idle check on irq entry
idle_cpu() is called on irq entry to guess if we need to call
tick_check_idle(). This way we can catch up with jiffies if the tick
was stopped, stop accounting idle time during the interrupt and
maintain the sched clock if it is unstable.

But if we are going to exit the idle loop to schedule a new task (ie:
if we have a task in the runqueue or a remotely enqueued ttwu to
perform), the idle_cpu() check will return 0 such that we miss the
call to tick_check_idle() for all interrupts happening before we
schedule the new task.

As a result these interrupts and the softirqs coming along may deal
with stale jiffies values, bad sched clock values, and won't substract
their time from the idle time accounting.

Fix this with using is_idle_task() instead that strictly checks that
we are running the idle task, without caring about the fact we are
going to schedule a task soon.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/1327427984-23282-3-git-send-email-fweisbec@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-02-15 15:23:09 +01:00
Steven Rostedt f069686e4b tracing/softirq: Move __raise_softirq_irqoff() out of header
The __raise_softirq_irqoff() contains a tracepoint. As tracepoints in headers
can cause issues, and not to mention, bloats the kernel when they are
in a static inline, it is best to move the function that contains the
tracepoint out of the header and into softirq.c.

Link: http://lkml.kernel.org/r/20120118120711.GB14863@elte.hu

Suggested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2012-02-03 09:48:19 -05:00
Frederic Weisbecker 416eb33cd6 rcu: Fix early call to rcu_idle_enter()
On the irq exit path, tick_nohz_irq_exit()
may raise a softirq, which action leads to the wake up
path and select_task_rq_fair() that makes use of rcu
to iterate the domains.

This is an illegal use of RCU because we may be in RCU
extended quiescent state if we interrupted an RCU-idle
window in the idle loop:

[  132.978883] ===============================
[  132.978883] [ INFO: suspicious RCU usage. ]
[  132.978883] -------------------------------
[  132.978883] kernel/sched_fair.c:1707 suspicious rcu_dereference_check() usage!
[  132.978883]
[  132.978883] other info that might help us debug this:
[  132.978883]
[  132.978883]
[  132.978883] rcu_scheduler_active = 1, debug_locks = 0
[  132.978883] RCU used illegally from extended quiescent state!
[  132.978883] 2 locks held by swapper/0:
[  132.978883]  #0:  (&p->pi_lock){-.-.-.}, at: [<ffffffff8105a729>] try_to_wake_up+0x39/0x2f0
[  132.978883]  #1:  (rcu_read_lock){.+.+..}, at: [<ffffffff8105556a>] select_task_rq_fair+0x6a/0xec0
[  132.978883]
[  132.978883] stack backtrace:
[  132.978883] Pid: 0, comm: swapper Tainted: G        W   3.0.0+ #178
[  132.978883] Call Trace:
[  132.978883]  <IRQ>  [<ffffffff810a01f6>] lockdep_rcu_suspicious+0xe6/0x100
[  132.978883]  [<ffffffff81055c49>] select_task_rq_fair+0x749/0xec0
[  132.978883]  [<ffffffff8105556a>] ? select_task_rq_fair+0x6a/0xec0
[  132.978883]  [<ffffffff812fe494>] ? do_raw_spin_lock+0x54/0x150
[  132.978883]  [<ffffffff810a1f2d>] ? trace_hardirqs_on+0xd/0x10
[  132.978883]  [<ffffffff8105a7c3>] try_to_wake_up+0xd3/0x2f0
[  132.978883]  [<ffffffff81094f98>] ? ktime_get+0x68/0xf0
[  132.978883]  [<ffffffff8105aa35>] wake_up_process+0x15/0x20
[  132.978883]  [<ffffffff81069dd5>] raise_softirq_irqoff+0x65/0x110
[  132.978883]  [<ffffffff8108eb65>] __hrtimer_start_range_ns+0x415/0x5a0
[  132.978883]  [<ffffffff812fe3ee>] ? do_raw_spin_unlock+0x5e/0xb0
[  132.978883]  [<ffffffff8108ed08>] hrtimer_start+0x18/0x20
[  132.978883]  [<ffffffff8109c9c3>] tick_nohz_stop_sched_tick+0x393/0x450
[  132.978883]  [<ffffffff810694f2>] irq_exit+0xd2/0x100
[  132.978883]  [<ffffffff81829e96>] do_IRQ+0x66/0xe0
[  132.978883]  [<ffffffff81820d53>] common_interrupt+0x13/0x13
[  132.978883]  <EOI>  [<ffffffff8103434b>] ? native_safe_halt+0xb/0x10
[  132.978883]  [<ffffffff810a1f2d>] ? trace_hardirqs_on+0xd/0x10
[  132.978883]  [<ffffffff810144ea>] default_idle+0xba/0x370
[  132.978883]  [<ffffffff810147fe>] amd_e400_idle+0x5e/0x130
[  132.978883]  [<ffffffff8100a9f6>] cpu_idle+0xb6/0x120
[  132.978883]  [<ffffffff817f217f>] rest_init+0xef/0x150
[  132.978883]  [<ffffffff817f20e2>] ? rest_init+0x52/0x150
[  132.978883]  [<ffffffff81ed9cf3>] start_kernel+0x3da/0x3e5
[  132.978883]  [<ffffffff81ed9346>] x86_64_start_reservations+0x131/0x135
[  132.978883]  [<ffffffff81ed944d>] x86_64_start_kernel+0x103/0x112

Fix this by calling rcu_idle_enter() after tick_nohz_irq_exit().

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-12-11 10:31:38 -08:00
Frederic Weisbecker 280f06774a nohz: Separate out irq exit and idle loop dyntick logic
The tick_nohz_stop_sched_tick() function, which tries to delay
the next timer tick as long as possible, can be called from two
places:

- From the idle loop to start the dytick idle mode
- From interrupt exit if we have interrupted the dyntick
idle mode, so that we reprogram the next tick event in
case the irq changed some internal state that requires this
action.

There are only few minor differences between both that
are handled by that function, driven by the ts->inidle
cpu variable and the inidle parameter. The whole guarantees
that we only update the dyntick mode on irq exit if we actually
interrupted the dyntick idle mode, and that we enter in RCU extended
quiescent state from idle loop entry only.

Split this function into:

- tick_nohz_idle_enter(), which sets ts->inidle to 1, enters
dynticks idle mode unconditionally if it can, and enters into RCU
extended quiescent state.

- tick_nohz_irq_exit() which only updates the dynticks idle mode
when ts->inidle is set (ie: if tick_nohz_idle_enter() has been called).

To maintain symmetry, tick_nohz_restart_sched_tick() has been renamed
into tick_nohz_idle_exit().

This simplifies the code and micro-optimize the irq exit path (no need
for local_irq_save there). This also prepares for the split between
dynticks and rcu extended quiescent state logics. We'll need this split to
further fix illegal uses of RCU in extended quiescent states in the idle
loop.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: David Miller <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-12-11 10:31:35 -08:00
Paul Gortmaker 9984de1a5a kernel: Map most files to use export.h instead of module.h
The changed files were only including linux/module.h for the
EXPORT_SYMBOL infrastructure, and nothing else.  Revector them
onto the isolated export header for faster compile times.

Nothing to see here but a whole lot of instances of:

  -#include <linux/module.h>
  +#include <linux/export.h>

This commit is only changing the kernel dir; next targets
will probably be mm, fs, the arch dirs, etc.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 09:20:12 -04:00
Peter Zijlstra ec433f0c51 softirq,rcu: Inform RCU of irq_exit() activity
The rcu_read_unlock_special() function relies on in_irq() to exclude
scheduler activity from interrupt level.  This fails because exit_irq()
can invoke the scheduler after clearing the preempt_count() bits that
in_irq() uses to determine that it is at interrupt level.  This situation
can result in failures as follows:

 $task			IRQ		SoftIRQ

 rcu_read_lock()

 /* do stuff */

 <preempt> |= UNLOCK_BLOCKED

 rcu_read_unlock()
   --t->rcu_read_lock_nesting

			irq_enter();
			/* do stuff, don't use RCU */
			irq_exit();
			  sub_preempt_count(IRQ_EXIT_OFFSET);
			  invoke_softirq()

					ttwu();
					  spin_lock_irq(&pi->lock)
					  rcu_read_lock();
					  /* do stuff */
					  rcu_read_unlock();
					    rcu_read_unlock_special()
					      rcu_report_exp_rnp()
					        ttwu()
					          spin_lock_irq(&pi->lock) /* deadlock */

   rcu_read_unlock_special(t);

Ed can simply trigger this 'easy' because invoke_softirq() immediately
does a ttwu() of ksoftirqd/# instead of doing the in-place softirq stuff
first, but even without that the above happens.

Cure this by also excluding softirqs from the
rcu_read_unlock_special() handler and ensuring the force_irqthreads
ksoftirqd/# wakeup is done from full softirq context.

[ Alternatively, delaying the ->rcu_read_lock_nesting decrement
  until after the special handling would make the thing more robust
  in the face of interrupts as well.  And there is a separate patch
  for that. ]

Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-and-tested-by: Ed Tomlinson <edt@aei.ca>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-07-20 10:50:12 -07:00
Shaohua Li 09223371de rcu: Use softirq to address performance regression
Commit a26ac2455ffcf3(rcu: move TREE_RCU from softirq to kthread)
introduced performance regression. In an AIM7 test, this commit degraded
performance by about 40%.

The commit runs rcu callbacks in a kthread instead of softirq. We observed
high rate of context switch which is caused by this. Out test system has
64 CPUs and HZ is 1000, so we saw more than 64k context switch per second
which is caused by RCU's per-CPU kthread.  A trace showed that most of
the time the RCU per-CPU kthread doesn't actually handle any callbacks,
but instead just does a very small amount of work handling grace periods.
This means that RCU's per-CPU kthreads are making the scheduler do quite
a bit of work in order to allow a very small amount of RCU-related
processing to be done.

Alex Shi's analysis determined that this slowdown is due to lock
contention within the scheduler.  Unfortunately, as Peter Zijlstra points
out, the scheduler's real-time semantics require global action, which
means that this contention is inherent in real-time scheduling.  (Yes,
perhaps someone will come up with a workaround -- otherwise, -rt is not
going to do well on large SMP systems -- but this patch will work around
this issue in the meantime.  And "the meantime" might well be forever.)

This patch therefore re-introduces softirq processing to RCU, but only
for core RCU work.  RCU callbacks are still executed in kthread context,
so that only a small amount of RCU work runs in softirq context in the
common case.  This should minimize ksoftirqd execution, allowing us to
skip boosting of ksoftirqd for CONFIG_RCU_BOOST=y kernels.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Tested-by: "Alex,Shi" <alex.shi@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-06-14 15:25:39 -07:00
Paul E. McKenney a26ac2455f rcu: move TREE_RCU from softirq to kthread
If RCU priority boosting is to be meaningful, callback invocation must
be boosted in addition to preempted RCU readers.  Otherwise, in presence
of CPU real-time threads, the grace period ends, but the callbacks don't
get invoked.  If the callbacks don't get invoked, the associated memory
doesn't get freed, so the system is still subject to OOM.

But it is not reasonable to priority-boost RCU_SOFTIRQ, so this commit
moves the callback invocations to a kthread, which can be boosted easily.

Also add comments and properly synchronized all accesses to
rcu_cpu_kthread_task, as suggested by Lai Jiangshan.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-05-05 23:16:54 -07:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Eric Dumazet 94dcf29a11 kthread: use kthread_create_on_node()
ksoftirqd, kworker, migration, and pktgend kthreads can be created with
kthread_create_on_node(), to get proper NUMA affinities for their stack and
task_struct.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:01 -07:00
Linus Torvalds 5f6fb45466 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (116 commits)
  x86: Enable forced interrupt threading support
  x86: Mark low level interrupts IRQF_NO_THREAD
  x86: Use generic show_interrupts
  x86: ioapic: Avoid redundant lookup of irq_cfg
  x86: ioapic: Use new move_irq functions
  x86: Use the proper accessors in fixup_irqs()
  x86: ioapic: Use irq_data->state
  x86: ioapic: Simplify irq chip and handler setup
  x86: Cleanup the genirq name space
  genirq: Add chip flag to force mask on suspend
  genirq: Add desc->irq_data accessor
  genirq: Add comments to Kconfig switches
  genirq: Fixup fasteoi handler for oneshot mode
  genirq: Provide forced interrupt threading
  sched: Switch wait_task_inactive to schedule_hrtimeout()
  genirq: Add IRQF_NO_THREAD
  genirq: Allow shared oneshot interrupts
  genirq: Prepare the handling of shared oneshot interrupts
  genirq: Make warning in handle_percpu_event useful
  x86: ioapic: Move trigger defines to io_apic.h
  ...

Fix up trivial(?) conflicts in arch/x86/pci/xen.c due to genirq name
space changes clashing with the Xen cleanups.  The set_irq_msi() had
moved to xen_bind_pirq_msi_to_irq().
2011-03-15 19:23:40 -07:00
Thomas Gleixner 8d32a307e4 genirq: Provide forced interrupt threading
Add a commandline parameter "threadirqs" which forces all interrupts except
those marked IRQF_NO_THREAD to run threaded. That's mostly a debug option to
allow retrieving better debug data from crashing interrupt handlers. If
"threadirqs" is not enabled on the kernel command line, then there is no
impact in the interrupt hotpath.

Architecture code needs to select CONFIG_IRQ_FORCED_THREADING after
marking the interrupts which cant be threaded IRQF_NO_THREAD. All
interrupts which have IRQF_TIMER set are implict marked
IRQF_NO_THREAD. Also all PER_CPU interrupts are excluded.

Forced threading hard interrupts also forces all soft interrupt
handling into thread context.

When enabled it might slow down things a bit, but for debugging problems in
interrupt code it's a reasonable penalty as it does not immediately
crash and burn the machine when an interrupt handler is buggy.

Some test results on a Core2Duo machine:

Cache cold run of:
 # time git grep irq_desc

      non-threaded       threaded
 real 1m18.741s          1m19.061s
 user 0m1.874s           0m1.757s
 sys  0m5.843s           0m5.427s

 # iperf -c server
non-threaded
[  3]  0.0-10.0 sec  1.09 GBytes   933 Mbits/sec
[  3]  0.0-10.0 sec  1.09 GBytes   934 Mbits/sec
[  3]  0.0-10.0 sec  1.09 GBytes   933 Mbits/sec
threaded
[  3]  0.0-10.0 sec  1.09 GBytes   939 Mbits/sec
[  3]  0.0-10.0 sec  1.09 GBytes   934 Mbits/sec
[  3]  0.0-10.0 sec  1.09 GBytes   937 Mbits/sec

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110223234956.772668648@linutronix.de>
2011-02-26 11:57:18 +01:00
Thomas Gleixner c305d524e5 softirq: Avoid stack switch from ksoftirqd
ksoftirqd() calls do_softirq() which switches stacks on several
architectures. That makes no sense at all. ksoftirqd's stack is
sufficient.

Call __do_softirq() directly.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: David Miller <davem@davemloft.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Reviewed-by: Frank Rowand <frank.rowand@am.sony.com>
LKML-Reference: <alpine.LFD.2.00.1102021704530.31804@localhost6.localdomain6>
2011-02-08 19:37:12 +01:00
Venkatesh Pallipadi 4dd53d891c softirqs: Free up pf flag PF_KSOFTIRQD
Cleanup patch, freeing up PF_KSOFTIRQD and use per_cpu ksoftirqd pointer
instead, as suggested by Eric Dumazet.

Tested-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Venkatesh Pallipadi <venki@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1292980144-28796-2-git-send-email-venki@google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-26 12:33:20 +01:00
Amerigo Wang 351f8f8e64 kernel: clean up USE_GENERIC_SMP_HELPERS
For arch which needs USE_GENERIC_SMP_HELPERS, it has to select
USE_GENERIC_SMP_HELPERS, rather than leaving a choice to user, since they
don't provide their own implementions.

Also, move on_each_cpu() to kernel/smp.c, it is strange to put it in
kernel/softirq.c.

For arch which doesn't use USE_GENERIC_SMP_HELPERS, e.g.  blackfin, only
on_each_cpu() is compiled.

Signed-off-by: Amerigo Wang <amwang@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 08:03:08 -08:00
Linus Torvalds 72eb6a7914 Merge branch 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (30 commits)
  gameport: use this_cpu_read instead of lookup
  x86: udelay: Use this_cpu_read to avoid address calculation
  x86: Use this_cpu_inc_return for nmi counter
  x86: Replace uses of current_cpu_data with this_cpu ops
  x86: Use this_cpu_ops to optimize code
  vmstat: User per cpu atomics to avoid interrupt disable / enable
  irq_work: Use per cpu atomics instead of regular atomics
  cpuops: Use cmpxchg for xchg to avoid lock semantics
  x86: this_cpu_cmpxchg and this_cpu_xchg operations
  percpu: Generic this_cpu_cmpxchg() and this_cpu_xchg support
  percpu,x86: relocate this_cpu_add_return() and friends
  connector: Use this_cpu operations
  xen: Use this_cpu_inc_return
  taskstats: Use this_cpu_ops
  random: Use this_cpu_inc_return
  fs: Use this_cpu_inc_return in buffer.c
  highmem: Use this_cpu_xx_return() operations
  vmstat: Use this_cpu_inc_return for vm statistics
  x86: Support for this_cpu_add, sub, dec, inc_return
  percpu: Generic support for this_cpu_add, sub, dec, inc_return
  ...

Fixed up conflicts: in arch/x86/kernel/{apic/nmi.c, apic/x2apic_uv_x.c, process.c}
as per Tejun.
2011-01-07 17:02:58 -08:00
Peter Zijlstra c9b5f501ef sched: Constify function scope static struct sched_param usage
Function-scope statics are discouraged because they are
easily overlooked and can cause subtle bugs/races due to
their global (non-SMP safe) nature.

Linus noticed that we did this for sched_param - at minimum
make the const.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: Message-ID: <AANLkTinotRxScOHEb0HgFgSpGPkq_6jKTv5CfvnQM=ee@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-07 15:55:45 +01:00
Christoph Lameter 909ea96468 core: Replace __get_cpu_var with __this_cpu_read if not used for an address.
__get_cpu_var() can be replaced with this_cpu_read and will then use a
single read instruction with implied address calculation to access the
correct per cpu instance.

However, the address of a per cpu variable passed to __this_cpu_read()
cannot be determined (since it's an implied address conversion through
segment prefixes).  Therefore apply this only to uses of __get_cpu_var
where the address of the variable is not used.

Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Hugh Dickins <hughd@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2010-12-17 15:07:19 +01:00
Ingo Molnar 92fd4d4d67 Merge commit 'v2.6.37-rc2' into sched/core
Merge reason: Move to a .37-rc base.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18 13:22:26 +01:00
Linus Torvalds a042e26137 Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (50 commits)
  perf python scripting: Add futex-contention script
  perf python scripting: Fixup cut'n'paste error in sctop script
  perf scripting: Shut up 'perf record' final status
  perf record: Remove newline character from perror() argument
  perf python scripting: Support fedora 11 (audit 1.7.17)
  perf python scripting: Improve the syscalls-by-pid script
  perf python scripting: print the syscall name on sctop
  perf python scripting: Improve the syscalls-counts script
  perf python scripting: Improve the failed-syscalls-by-pid script
  kprobes: Remove redundant text_mutex lock in optimize
  x86/oprofile: Fix uninitialized variable use in debug printk
  tracing: Fix 'faild' -> 'failed' typo
  perf probe: Fix format specified for Dwarf_Off parameter
  perf trace: Fix detection of script extension
  perf trace: Use $PERF_EXEC_PATH in canned report scripts
  perf tools: Document event modifiers
  perf tools: Remove direct slang.h include
  perf_events: Fix for transaction recovery in group_sched_in()
  perf_events: Revert: Fix transaction recovery in group_sched_in()
  perf, x86: Use NUMA aware allocations for PEBS/BTS/DS allocations
  ...
2010-10-27 18:48:00 -07:00
Ingo Molnar b8ecad8b2f Merge branch 'perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/urgent 2010-10-23 20:05:43 +02:00