Commit Graph

150 Commits

Author SHA1 Message Date
Manfred Spraul 9de5ab8a2e ipc/sem: add hysteresis
sysv sem has two lock modes: One with per-semaphore locks, one lock mode
with a single global lock for the whole array.  When switching from the
per-semaphore locks to the global lock, all per-semaphore locks must be
scanned for ongoing operations.

The patch adds a hysteresis for switching from the global lock to the
per semaphore locks.  This reduces how often the per-semaphore locks
must be scanned.

Compared to the initial patch, this is a simplified solution: Setting
USE_GLOBAL_LOCK_HYSTERESIS to 1 restores the current behavior.

In theory, a workload with exactly 10 simple sops and then one complex
op now scales a bit worse, but this is pure theory: If there is
concurrency, the it won't be exactly 10:1:10:1:10:1:...  If there is no
concurrency, then there is no need for scalability.

Link: http://lkml.kernel.org/r/1476851896-3590-3-git-send-email-manfred@colorfullife.com
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: <1vier1@web.de>
Cc: kernel test robot <xiaolong.ye@intel.com>
Cc: <felixh@informatik.uni-bremen.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:46 -08:00
Manfred Spraul 27d7be1801 ipc/sem.c: avoid using spin_unlock_wait()
a) The ACQUIRE in spin_lock() applies to the read, not to the store, at
   least for powerpc.  This forces to add a smp_mb() into the fast path.

b) The memory barrier provided by spin_unlock_wait() is right now arch
   dependent.

Therefore: Use spin_lock()/spin_unlock() instead of spin_unlock_wait().

Advantage: faster single op semop calls(), observed +8.9% on x86.  (the
other solution would be arch dependencies in ipc/sem).

Disadvantage: slower complex op semop calls, if (and only if) there are
no sleeping operations.

The next patch adds hysteresis, this further reduces the probability
that the slow path is used.

Link: http://lkml.kernel.org/r/1476851896-3590-2-git-send-email-manfred@colorfullife.com
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: <1vier1@web.de>
Cc: kernel test robot <xiaolong.ye@intel.com>
Cc: <felixh@informatik.uni-bremen.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:46 -08:00
Manfred Spraul c626bc46ed ipc/sem.c: fix incorrect sem_lock pairing
Based on the syzcaller test case from dvyukov:

  08d0a261fe/gistfile1.txt

The slow (i.e.: failure to acquire) syscall exit from semtimedop()
incorrectly assumed that the the same lock is acquired as it was at the
initial syscall entry.

This is wrong:
 - thread A: single semop semop(), sleeps
 - thread B: multi semop semop(), sleeps
 - thread A: woken up by signal/timeout

With this sequence, the initial sem_lock() call locks the per-semaphore
spinlock, and it is unlocked with sem_unlock().  The call at the syscall
return locks the global spinlock.  Because locknum is not updated, the
following sem_unlock() call unlocks the per-semaphore spinlock, which is
actually not locked.

The fix is trivial: Use the return value from sem_lock.

Fixes: 370b262c89 ("ipc/sem: avoid idr tree lookup for interrupted semop")
Link: http://lkml.kernel.org/r/1482215645-22328-1-git-send-email-manfred@colorfullife.com
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Johanna Abrahamsson <johanna@mjao.org>
Tested-by: Johanna Abrahamsson <johanna@mjao.org>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-10 18:31:55 -08:00
Davidlohr Bueso 370b262c89 ipc/sem: avoid idr tree lookup for interrupted semop
We can avoid the idr tree lookup (albeit possibly avoiding
idr_find_fast()) when being awoken in EINTR, as the semid will not
change in this context while blocked.  Use the sma pointer directly and
take the sem_lock, then re-check for RMID races.  We continue to
re-check the queue.status with the lock held such that we can detect
situations where we where are dealing with a spurious wakeup but another
task that holds the sem_lock updated the queue.status while we were
spinning for it.  Once we take the lock it obviously won't change again.

Being the only caller, get rid of sem_obtain_lock() altogether.

Link: http://lkml.kernel.org/r/1478708774-28826-3-git-send-email-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14 16:04:08 -08:00
Davidlohr Bueso b5fa01a22e ipc/sem: simplify wait-wake loop
Instead of using the reverse goto, we can simplify the flow and make it
more language natural by just doing do-while instead.  One would hope
this is the standard way (or obviously just with a while bucle) that we
do wait/wakeup handling in the kernel.  The exact same logic is kept,
just more indented.

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/1478708774-28826-2-git-send-email-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14 16:04:08 -08:00
Davidlohr Bueso f150f02cfb ipc/sem: use proper list api for pending_list wakeups
... saves some LoC and looks cleaner than re-implementing the calls.

Link: http://lkml.kernel.org/r/1474225896-10066-6-git-send-email-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14 16:04:08 -08:00
Davidlohr Bueso 4663d3e8f2 ipc/sem: explicitly inline check_restart
The compiler already does this, but make it explicit.  This helper is
really small and also used in update_queue's main loop, which is O(N^2)
scanning.  Inline and avoid the function overhead.

Link: http://lkml.kernel.org/r/1474225896-10066-5-git-send-email-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14 16:04:08 -08:00
Davidlohr Bueso 4ce33ec2e4 ipc/sem: optimize perform_atomic_semop()
This is the main workhorse that deals with semop user calls such that
the waitforzero or semval update operations, on the set, can complete on
not as the sma currently stands.  Currently, the set is iterated twice
(setting semval, then backwards for the sempid value).  Slowpaths, and
particularly SEM_UNDO calls, must undo any altered sem when it is
detected that the caller must block or has errored-out.

With larger sets, there can occur situations where this involves a lot
of cycles and can obviously be a suboptimal use of cached resources in
shared memory.  Ie, discarding CPU caches that are also calling semop
and have the sembuf cached (and can complete), while the current lock
holder doing the semop will block, error, or does a waitforzero
operation.

This patch proposes still iterating the set twice, but the first scan is
read-only, and we perform the actual updates afterward, once we know
that the call will succeed.  In order to not suffer from the overhead of
dealing with sops that act on the same sem_num, such (rare) cases use
perform_atomic_semop_slow(), which is exactly what we have now.
Duplicates are detected before grabbing sem_lock, and uses simple a
32/64-bit hash array variable to based on the sem_num we are working on.

In addition add some comments to when we expect to the caller to block.

[akpm@linux-foundation.org: coding-style fixes]
[colin.king@canonical.com: ensure we left shift a ULL rather than a 32 bit integer]
  Link: http://lkml.kernel.org/r/20161028181129.7311-1-colin.king@canonical.com
Link: http://lkml.kernel.org/r/20160921194603.GB21438@linux-80c1.suse
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14 16:04:08 -08:00
Davidlohr Bueso 9ae949fa38 ipc/sem: rework task wakeups
Our sysv sems have been using the notion of lockless wakeups for a
while, ever since commit 0a2b9d4c79 ("ipc/sem.c: move wake_up_process
out of the spinlock section"), in order to reduce the sem_lock hold
times.  This in-house pending queue can be replaced by wake_q (just like
all the rest of ipc now), in that it provides the following advantages:

 o Simplifies and gets rid of unnecessary code.

 o We get rid of the IN_WAKEUP complexities. Given that wake_q_add()
   grabs reference to the task, if awoken due to an unrelated event,
   between the wake_q_add() and wake_up_q() window, we cannot race with
   sys_exit and the imminent call to wake_up_process().

 o By not spinning IN_WAKEUP, we no longer need to disable preemption.

In consequence, the wakeup paths (after schedule(), that is) must
acknowledge an external signal/event, as well spurious wakeup occurring
during the pending wakeup window.  Obviously no changes in semantics
that could be visible to the user.  The fastpath is _only_ for when we
know for sure that we were awoken due to a the waker's successful semop
call (queue.status is not -EINTR).

On a 48-core Haswell, running the ipcscale 'waitforzero' test, the
following is seen with increasing thread counts:

                               v4.8-rc5                v4.8-rc5
                                                        semopv2
Hmean    sembench-sem-2      574733.00 (  0.00%)   578322.00 (  0.62%)
Hmean    sembench-sem-8      811708.00 (  0.00%)   824689.00 (  1.59%)
Hmean    sembench-sem-12     842448.00 (  0.00%)   845409.00 (  0.35%)
Hmean    sembench-sem-21     933003.00 (  0.00%)   977748.00 (  4.80%)
Hmean    sembench-sem-48     935910.00 (  0.00%)  1004759.00 (  7.36%)
Hmean    sembench-sem-79     937186.00 (  0.00%)   983976.00 (  4.99%)
Hmean    sembench-sem-234    974256.00 (  0.00%)  1060294.00 (  8.83%)
Hmean    sembench-sem-265    975468.00 (  0.00%)  1016243.00 (  4.18%)
Hmean    sembench-sem-296    991280.00 (  0.00%)  1042659.00 (  5.18%)
Hmean    sembench-sem-327    975415.00 (  0.00%)  1029977.00 (  5.59%)
Hmean    sembench-sem-358   1014286.00 (  0.00%)  1049624.00 (  3.48%)
Hmean    sembench-sem-389    972939.00 (  0.00%)  1043127.00 (  7.21%)
Hmean    sembench-sem-420    981909.00 (  0.00%)  1056747.00 (  7.62%)
Hmean    sembench-sem-451    990139.00 (  0.00%)  1051609.00 (  6.21%)
Hmean    sembench-sem-482    965735.00 (  0.00%)  1040313.00 (  7.72%)

[akpm@linux-foundation.org: coding-style fixes]
[sfr@canb.auug.org.au: merge fix for WAKE_Q to DEFINE_WAKE_Q rename]
  Link: http://lkml.kernel.org/r/20161122210410.5eca9fc2@canb.auug.org.au
Link: http://lkml.kernel.org/r/1474225896-10066-3-git-send-email-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14 16:04:08 -08:00
Davidlohr Bueso 248e7357cf ipc/sem: do not call wake_sem_queue_do() prematurely ... as this call should obviously be paired with its _prepare()
counterpart.  At least whenever possible, as there is no harm in calling
it bogusly as we do now in a few places.  Immediate error semop(2) paths
that are far from ever having the task block can be simplified and avoid
a few unnecessary loads on their way out of the call as it is not deeply
nested.

Link: http://lkml.kernel.org/r/1474225896-10066-2-git-send-email-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14 16:04:08 -08:00
Nikolay Borisov 2a1613a586 ipc/sem.c: add cond_resched in exit_sme
In CONFIG_PREEMPT=n kernel a softlockup was observed while the for loop in
exit_sem.  Apparently it's possible for the loop to take quite a long time
and it doesn't have a scheduling point in it.  Since the codes is
executing under an rcu read section this may also cause rcu stalls, which
in turn block synchronize_rcu operations, which more or less de-stabilises
the whole system.

Fix this by introducing a cond_resched() at the beginning of the loop.

So this patch fixes the following:

  NMI watchdog: BUG: soft lockup - CPU#10 stuck for 23s! [httpd:18119]
  CPU: 10 PID: 18119 Comm: httpd Tainted: G           O    4.4.20-clouder2 #6
  Hardware name: Supermicro X10DRi/X10DRi, BIOS 1.1 04/14/2015
  task: ffff88348d695280 ti: ffff881c95550000 task.ti: ffff881c95550000
  RIP: 0010:[<ffffffff81614bc7>]  [<ffffffff81614bc7>] _raw_spin_lock+0x17/0x30
  RSP: 0018:ffff881c95553e40  EFLAGS: 00000246
  RAX: 0000000000000000 RBX: ffff883161b1eea8 RCX: 000000000000000d
  RDX: 0000000000000001 RSI: 000000000000000e RDI: ffff883161b1eea4
  RBP: ffff881c95553ea0 R08: ffff881c95553e68 R09: ffff883fef376f88
  R10: ffff881fffb58c20 R11: ffffea0072556600 R12: ffff883161b1eea0
  R13: ffff88348d695280 R14: ffff883dec427000 R15: ffff8831621672a0
  FS:  0000000000000000(0000) GS:ffff881fffb40000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f3b3723e020 CR3: 0000000001c0a000 CR4: 00000000001406e0
  Call Trace:
    ? exit_sem+0x7c/0x280
    do_exit+0x338/0xb40
    do_group_exit+0x43/0xd0
    SyS_exit_group+0x14/0x20
    entry_SYSCALL_64_fastpath+0x16/0x6e

Link: http://lkml.kernel.org/r/1475154992-6363-1-git-send-email-kernel@kyup.com
Signed-off-by: Nikolay Borisov <kernel@kyup.com>
Cc: Herton R. Krzesinski <herton@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11 15:06:33 -07:00
Manfred Spraul 5864a2fd30 ipc/sem.c: fix complex_count vs. simple op race
Commit 6d07b68ce1 ("ipc/sem.c: optimize sem_lock()") introduced a
race:

sem_lock has a fast path that allows parallel simple operations.
There are two reasons why a simple operation cannot run in parallel:
 - a non-simple operations is ongoing (sma->sem_perm.lock held)
 - a complex operation is sleeping (sma->complex_count != 0)

As both facts are stored independently, a thread can bypass the current
checks by sleeping in the right positions.  See below for more details
(or kernel bugzilla 105651).

The patch fixes that by creating one variable (complex_mode)
that tracks both reasons why parallel operations are not possible.

The patch also updates stale documentation regarding the locking.

With regards to stable kernels:
The patch is required for all kernels that include the
commit 6d07b68ce1 ("ipc/sem.c: optimize sem_lock()") (3.10?)

The alternative is to revert the patch that introduced the race.

The patch is safe for backporting, i.e. it makes no assumptions
about memory barriers in spin_unlock_wait().

Background:
Here is the race of the current implementation:

Thread A: (simple op)
- does the first "sma->complex_count == 0" test

Thread B: (complex op)
- does sem_lock(): This includes an array scan. But the scan can't
  find Thread A, because Thread A does not own sem->lock yet.
- the thread does the operation, increases complex_count,
  drops sem_lock, sleeps

Thread A:
- spin_lock(&sem->lock), spin_is_locked(sma->sem_perm.lock)
- sleeps before the complex_count test

Thread C: (complex op)
- does sem_lock (no array scan, complex_count==1)
- wakes up Thread B.
- decrements complex_count

Thread A:
- does the complex_count test

Bug:
Now both thread A and thread C operate on the same array, without
any synchronization.

Fixes: 6d07b68ce1 ("ipc/sem.c: optimize sem_lock()")
Link: http://lkml.kernel.org/r/1469123695-5661-1-git-send-email-manfred@colorfullife.com
Reported-by: <felixh@informatik.uni-bremen.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <1vier1@web.de>
Cc: <stable@vger.kernel.org>	[3.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11 15:06:33 -07:00
Fabian Frederick 9b24fef9f0 sysv, ipc: fix security-layer leaking
Commit 53dad6d3a8 ("ipc: fix race with LSMs") updated ipc_rcu_putref()
to receive rcu freeing function but used generic ipc_rcu_free() instead
of msg_rcu_free() which does security cleaning.

Running LTP msgsnd06 with kmemleak gives the following:

  cat /sys/kernel/debug/kmemleak

  unreferenced object 0xffff88003c0a11f8 (size 8):
    comm "msgsnd06", pid 1645, jiffies 4294672526 (age 6.549s)
    hex dump (first 8 bytes):
      1b 00 00 00 01 00 00 00                          ........
    backtrace:
      kmemleak_alloc+0x23/0x40
      kmem_cache_alloc_trace+0xe1/0x180
      selinux_msg_queue_alloc_security+0x3f/0xd0
      security_msg_queue_alloc+0x2e/0x40
      newque+0x4e/0x150
      ipcget+0x159/0x1b0
      SyS_msgget+0x39/0x40
      entry_SYSCALL_64_fastpath+0x13/0x8f

Manfred Spraul suggested to fix sem.c as well and Davidlohr Bueso to
only use ipc_rcu_free in case of security allocation failure in newary()

Fixes: 53dad6d3a8 ("ipc: fix race with LSMs")
Link: http://lkml.kernel.org/r/1470083552-22966-1-git-send-email-fabf@skynet.be
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: <stable@vger.kernel.org>	[3.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02 17:31:41 -04:00
Peter Zijlstra be3e784498 locking/spinlock: Update spin_unlock_wait() users
With the modified semantics of spin_unlock_wait() a number of
explicit barriers can be removed. Also update the comment for the
do_exit() usecase, as that was somewhat stale/obscure.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-14 11:55:15 +02:00
Peter Zijlstra 33ac279677 locking/barriers: Introduce smp_acquire__after_ctrl_dep()
Introduce smp_acquire__after_ctrl_dep(), this construct is not
uncommon, but the lack of this barrier is.

Use it to better express smp_rmb() uses in WRITE_ONCE(), the IPC
semaphore code and the qspinlock code.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-14 11:55:14 +02:00
Davidlohr Bueso a5f4db8771 ipc/sem: make semctl setting sempid consistent
As indicated by bug#112271, Linux sets the sempid value upon semctl, and
not only for semop calls.  However, within semctl we only do this for
SETVAL, leaving SETALL without updating the field, and therefore rather
inconsistent behavior when compared to other Unices.

There is really no documentation regarding this and therefore users
should not make assumptions.  With this patch, along with updating
semctl.2 manpages, this scenario should become less ambiguous As such,
set sempid on SETALL cmd.

Also update some in-code documentation, specifying where the sempid is
set.

Passes ltp and custom testcase where a child (fork) does SETALL to the
set.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reported-by: Philip Semanchuk <linux_kernel.20.ick@spamgourmet.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Herton R. Krzesinski <herton@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-22 15:36:02 -07:00
Tetsuo Handa 1d5cfdb076 tree wide: use kvfree() than conditional kfree()/vfree()
There are many locations that do

  if (memory_was_allocated_by_vmalloc)
    vfree(ptr);
  else
    kfree(ptr);

but kvfree() can handle both kmalloc()ed memory and vmalloc()ed memory
using is_vmalloc_addr().  Unless callers have special reasons, we can
replace this branch with kvfree().  Please check and reply if you found
problems.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Jan Kara <jack@suse.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Acked-by: David Rientjes <rientjes@google.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Boris Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-22 17:02:18 -08:00
Manfred Spraul 3ed1f8a99d ipc/sem.c: update/correct memory barriers
sem_lock() did not properly pair memory barriers:

!spin_is_locked() and spin_unlock_wait() are both only control barriers.
The code needs an acquire barrier, otherwise the cpu might perform read
operations before the lock test.

As no primitive exists inside <include/spinlock.h> and since it seems
noone wants another primitive, the code creates a local primitive within
ipc/sem.c.

With regards to -stable:

The change of sem_wait_array() is a bugfix, the change to sem_lock() is a
nop (just a preprocessor redefinition to improve the readability).  The
bugfix is necessary for all kernels that use sem_wait_array() (i.e.:
starting from 3.10).

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Reported-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Kirill Tkhai <ktkhai@parallels.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>	[3.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-08-14 15:56:32 -07:00
Herton R. Krzesinski a979558448 ipc,sem: remove uneeded sem_undo_list lock usage in exit_sem()
After we acquire the sma->sem_perm lock in exit_sem(), we are protected
against a racing IPC_RMID operation.  Also at that point, we are the last
user of sem_undo_list.  Therefore it isn't required that we acquire or use
ulp->lock.

Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Rafael Aquini <aquini@redhat.com>
CC: Aristeu Rozanski <aris@redhat.com>
Cc: David Jeffery <djeffery@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-08-14 15:56:32 -07:00
Herton R. Krzesinski 602b8593d2 ipc,sem: fix use after free on IPC_RMID after a task using same semaphore set exits
The current semaphore code allows a potential use after free: in
exit_sem we may free the task's sem_undo_list while there is still
another task looping through the same semaphore set and cleaning the
sem_undo list at freeary function (the task called IPC_RMID for the same
semaphore set).

For example, with a test program [1] running which keeps forking a lot
of processes (which then do a semop call with SEM_UNDO flag), and with
the parent right after removing the semaphore set with IPC_RMID, and a
kernel built with CONFIG_SLAB, CONFIG_SLAB_DEBUG and
CONFIG_DEBUG_SPINLOCK, you can easily see something like the following
in the kernel log:

   Slab corruption (Not tainted): kmalloc-64 start=ffff88003b45c1c0, len=64
   000: 6b 6b 6b 6b 6b 6b 6b 6b 00 6b 6b 6b 6b 6b 6b 6b  kkkkkkkk.kkkkkkk
   010: ff ff ff ff 6b 6b 6b 6b ff ff ff ff ff ff ff ff  ....kkkk........
   Prev obj: start=ffff88003b45c180, len=64
   000: 00 00 00 00 ad 4e ad de ff ff ff ff 5a 5a 5a 5a  .....N......ZZZZ
   010: ff ff ff ff ff ff ff ff c0 fb 01 37 00 88 ff ff  ...........7....
   Next obj: start=ffff88003b45c200, len=64
   000: 00 00 00 00 ad 4e ad de ff ff ff ff 5a 5a 5a 5a  .....N......ZZZZ
   010: ff ff ff ff ff ff ff ff 68 29 a7 3c 00 88 ff ff  ........h).<....
   BUG: spinlock wrong CPU on CPU#2, test/18028
   general protection fault: 0000 [#1] SMP
   Modules linked in: 8021q mrp garp stp llc nf_conntrack_ipv4 nf_defrag_ipv4 ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables binfmt_misc ppdev input_leds joydev parport_pc parport floppy serio_raw virtio_balloon virtio_rng virtio_console virtio_net iosf_mbi crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcspkr qxl ttm drm_kms_helper drm snd_hda_codec_generic i2c_piix4 snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore crc32c_intel virtio_pci virtio_ring virtio pata_acpi ata_generic [last unloaded: speedstep_lib]
   CPU: 2 PID: 18028 Comm: test Not tainted 4.2.0-rc5+ #1
   Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014
   RIP: spin_dump+0x53/0xc0
   Call Trace:
     spin_bug+0x30/0x40
     do_raw_spin_unlock+0x71/0xa0
     _raw_spin_unlock+0xe/0x10
     freeary+0x82/0x2a0
     ? _raw_spin_lock+0xe/0x10
     semctl_down.clone.0+0xce/0x160
     ? __do_page_fault+0x19a/0x430
     ? __audit_syscall_entry+0xa8/0x100
     SyS_semctl+0x236/0x2c0
     ? syscall_trace_leave+0xde/0x130
     entry_SYSCALL_64_fastpath+0x12/0x71
   Code: 8b 80 88 03 00 00 48 8d 88 60 05 00 00 48 c7 c7 a0 2c a4 81 31 c0 65 8b 15 eb 40 f3 7e e8 08 31 68 00 4d 85 e4 44 8b 4b 08 74 5e <45> 8b 84 24 88 03 00 00 49 8d 8c 24 60 05 00 00 8b 53 04 48 89
   RIP  [<ffffffff810d6053>] spin_dump+0x53/0xc0
    RSP <ffff88003750fd68>
   ---[ end trace 783ebb76612867a0 ]---
   NMI watchdog: BUG: soft lockup - CPU#3 stuck for 22s! [test:18053]
   Modules linked in: 8021q mrp garp stp llc nf_conntrack_ipv4 nf_defrag_ipv4 ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables binfmt_misc ppdev input_leds joydev parport_pc parport floppy serio_raw virtio_balloon virtio_rng virtio_console virtio_net iosf_mbi crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcspkr qxl ttm drm_kms_helper drm snd_hda_codec_generic i2c_piix4 snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore crc32c_intel virtio_pci virtio_ring virtio pata_acpi ata_generic [last unloaded: speedstep_lib]
   CPU: 3 PID: 18053 Comm: test Tainted: G      D         4.2.0-rc5+ #1
   Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014
   RIP: native_read_tsc+0x0/0x20
   Call Trace:
     ? delay_tsc+0x40/0x70
     __delay+0xf/0x20
     do_raw_spin_lock+0x96/0x140
     _raw_spin_lock+0xe/0x10
     sem_lock_and_putref+0x11/0x70
     SYSC_semtimedop+0x7bf/0x960
     ? handle_mm_fault+0xbf6/0x1880
     ? dequeue_task_fair+0x79/0x4a0
     ? __do_page_fault+0x19a/0x430
     ? kfree_debugcheck+0x16/0x40
     ? __do_page_fault+0x19a/0x430
     ? __audit_syscall_entry+0xa8/0x100
     ? do_audit_syscall_entry+0x66/0x70
     ? syscall_trace_enter_phase1+0x139/0x160
     SyS_semtimedop+0xe/0x10
     SyS_semop+0x10/0x20
     entry_SYSCALL_64_fastpath+0x12/0x71
   Code: 47 10 83 e8 01 85 c0 89 47 10 75 08 65 48 89 3d 1f 74 ff 7e c9 c3 0f 1f 44 00 00 55 48 89 e5 e8 87 17 04 00 66 90 c9 c3 0f 1f 00 <55> 48 89 e5 0f 31 89 c1 48 89 d0 48 c1 e0 20 89 c9 48 09 c8 c9
   Kernel panic - not syncing: softlockup: hung tasks

I wasn't able to trigger any badness on a recent kernel without the
proper config debugs enabled, however I have softlockup reports on some
kernel versions, in the semaphore code, which are similar as above (the
scenario is seen on some servers running IBM DB2 which uses semaphore
syscalls).

The patch here fixes the race against freeary, by acquiring or waiting
on the sem_undo_list lock as necessary (exit_sem can race with freeary,
while freeary sets un->semid to -1 and removes the same sem_undo from
list_proc or when it removes the last sem_undo).

After the patch I'm unable to reproduce the problem using the test case
[1].

[1] Test case used below:

    #include <stdio.h>
    #include <sys/types.h>
    #include <sys/ipc.h>
    #include <sys/sem.h>
    #include <sys/wait.h>
    #include <stdlib.h>
    #include <time.h>
    #include <unistd.h>
    #include <errno.h>

    #define NSEM 1
    #define NSET 5

    int sid[NSET];

    void thread()
    {
            struct sembuf op;
            int s;
            uid_t pid = getuid();

            s = rand() % NSET;
            op.sem_num = pid % NSEM;
            op.sem_op = 1;
            op.sem_flg = SEM_UNDO;

            semop(sid[s], &op, 1);
            exit(EXIT_SUCCESS);
    }

    void create_set()
    {
            int i, j;
            pid_t p;
            union {
                    int val;
                    struct semid_ds *buf;
                    unsigned short int *array;
                    struct seminfo *__buf;
            } un;

            /* Create and initialize semaphore set */
            for (i = 0; i < NSET; i++) {
                    sid[i] = semget(IPC_PRIVATE , NSEM, 0644 | IPC_CREAT);
                    if (sid[i] < 0) {
                            perror("semget");
                            exit(EXIT_FAILURE);
                    }
            }
            un.val = 0;
            for (i = 0; i < NSET; i++) {
                    for (j = 0; j < NSEM; j++) {
                            if (semctl(sid[i], j, SETVAL, un) < 0)
                                    perror("semctl");
                    }
            }

            /* Launch threads that operate on semaphore set */
            for (i = 0; i < NSEM * NSET * NSET; i++) {
                    p = fork();
                    if (p < 0)
                            perror("fork");
                    if (p == 0)
                            thread();
            }

            /* Free semaphore set */
            for (i = 0; i < NSET; i++) {
                    if (semctl(sid[i], NSEM, IPC_RMID))
                            perror("IPC_RMID");
            }

            /* Wait for forked processes to exit */
            while (wait(NULL)) {
                    if (errno == ECHILD)
                            break;
            };
    }

    int main(int argc, char **argv)
    {
            pid_t p;

            srand(time(NULL));

            while (1) {
                    p = fork();
                    if (p < 0) {
                            perror("fork");
                            exit(EXIT_FAILURE);
                    }
                    if (p == 0) {
                            create_set();
                            goto end;
                    }

                    /* Wait for forked processes to exit */
                    while (wait(NULL)) {
                            if (errno == ECHILD)
                                    break;
                    };
            }
    end:
            return 0;
    }

[akpm@linux-foundation.org: use normal comment layout]
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Rafael Aquini <aquini@redhat.com>
CC: Aristeu Rozanski <aris@redhat.com>
Cc: David Jeffery <djeffery@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-08-14 15:56:32 -07:00
Davidlohr Bueso 55b7ae5016 ipc: rename ipc_obtain_object
...  to ipc_obtain_object_idr, which is more meaningful and makes the code
slightly easier to follow.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30 19:44:58 -07:00
Joe Perches 7f032d6ef6 ipc: remove use of seq_printf return value
The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c03 ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 16:35:24 -07:00
Davidlohr Bueso 52644c9ab3 ipc,sem: use current->state helpers
Call __set_current_state() instead of assigning the new state directly.
These interfaces also aid CONFIG_DEBUG_ATOMIC_SLEEP environments, keeping
track of who changed the state.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17 14:34:55 -08:00
Manfred Spraul 2e094abfd1 ipc/sem.c: change memory barrier in sem_lock() to smp_rmb()
When I fixed bugs in the sem_lock() logic, I was more conservative than
necessary.  Therefore it is safe to replace the smp_mb() with smp_rmb().
And: With smp_rmb(), semop() syscalls are up to 10% faster.

The race we must protect against is:

	sem->lock is free
	sma->complex_count = 0
	sma->sem_perm.lock held by thread B

thread A:

A: spin_lock(&sem->lock)

			B: sma->complex_count++; (now 1)
			B: spin_unlock(&sma->sem_perm.lock);

A: spin_is_locked(&sma->sem_perm.lock);
A: XXXXX memory barrier
A: if (sma->complex_count == 0)

Thread A must read the increased complex_count value, i.e. the read must
not be reordered with the read of sem_perm.lock done by spin_is_locked().

Since it's about ordering of reads, smp_rmb() is sufficient.

[akpm@linux-foundation.org: update sem_lock() comment, from Davidlohr]
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 12:42:52 -08:00
Manfred Spraul e8577d1f03 ipc/sem.c: fully initialize sem_array before making it visible
ipc_addid() makes a new ipc identifier visible to everyone.  New objects
start as locked, so that the caller can complete the initialization
after the call.  Within struct sem_array, at least sma->sem_base and
sma->sem_nsems are accessed without any locks, therefore this approach
doesn't work.

Thus: Move the ipc_addid() to the end of the initialization.

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Reported-by: Rik van Riel <riel@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-03 09:36:03 -08:00
Manfred Spraul 9b44ee2eef ipc/sem.c: add a printk_once for semctl(GETNCNT/GETZCNT)
The actual Linux implementation for semctl(GETNCNT) and semctl(GETZCNT)
always (since 0.99.10) reported a thread as sleeping on all semaphores
that are listed in the semop() call.

The documented behavior (both in the Linux man page and in the Single
Unix Specification) is that a task should be reported on exactly one
semaphore: The semaphore that caused the thread to got to sleep.

This patch adds a pr_info_once() that is triggered if a thread hits the
relevant case.

The code triggers slightly too often, otherwise it would be necessary to
replicate the old code.  As there are no known users of GETNCNT or
GETZCNT, this is done to prevent unnecessary bloat.

The task that triggered is reported with name (tsk->comm) and pid.

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Acked-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:15 -07:00
Manfred Spraul b220c57aec ipc/sem.c: make semctl(,,{GETNCNT,GETZCNT}) standard compliant
SUSv4 clearly defines how semncnt and semzcnt must be calculated: A task
waits on exactly one semaphore: The semaphore from the first operation
in the sop array that cannot proceed.

The Linux implementation never followed the standard, it tried to count
all semaphores that might be the reason why a task sleeps.

This patch fixes that.

Note:
a) The implementation assumes that GETNCNT and GETZCNT are rare operations,
   therefore the code counts them only on demand.
   (If they wouldn't be rare, then the non-compliance would have
   been found earlier)

b) compared to the initial version of the patch, the BUG_ONs were removed
   and it was clarified that the new behavior conforms to SUS.

Back-compatibility concerns:

Manfred:

: - there is no application in Fedora that uses GETNCNT or GETZCNT.
:
: - application that use only single-sop semop() are also safe, the
:   difference only affects complex apps.
:
: - portable application are also safe, the new behavior is standard
:   compliant.
:
: But that's it.  The old behavior existed in Linux from 0.99.something
: until now.

Michael:

: * These operations seem to be very little used.  Grepping the public
:   source that is contained Fedora 20 source DVD, there appear to be no
:   uses.  Of course, this says nothing about uses in private /
:   non-mainstream FOSS code, but it seems likely that the same pattern
:   is followed there.
:
: * The existing behavior is hard enough to understand that I suspect
:   that no one understood it well enough to rely on it anyway
:   (especially as that behavior contradicted both man page and POSIX).
:
: So, there's a chance of breakage, but I estimate that it's minute.

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:15 -07:00
Manfred Spraul ed247b7ca0 ipc/sem.c: store which operation blocks in perform_atomic_semop()
Preparation for the next patch:

In the slow-path of perform_atomic_semop(), store a pointer to the
operation that caused the operation to block.

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:15 -07:00
Manfred Spraul d198cd6d6d ipc/sem.c: change perform_atomic_semop parameters
Right now, perform_atomic_semop gets the content of sem_queue as
individual fields.  Changes that, instead pass a pointer to sem_queue.

This is a preparation for the next patch: it uses sem_queue to store the
reason why a task must sleep.

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:15 -07:00
Manfred Spraul 2f2ed41dca ipc/sem.c: remove code duplication
count_semzcnt and count_semncnt are more of less identical.  The patch
creates a single function that either counts the number of tasks waiting
for zero or waiting due to a decrease operation.

Compared to the initial version, the BUG_ONs were removed.

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:15 -07:00
Manfred Spraul 1994862dc9 ipc/sem.c: bugfix for semctl(,,GETZCNT)
GETZCNT is supposed to return the number of threads that wait until a
semaphore value becomes 0.

The current implementation overlooks complex operations that contain
both wait-for-zero operation and operations that alter at least one
semaphore.

The patch fixes that.  It's intentionally copy&paste, this will be
cleaned up in the next patch.

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:15 -07:00
Paul McQuade 46c0a8ca3e ipc, kernel: clear whitespace
trailing whitespace

Signed-off-by: Paul McQuade <paulmcquad@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:14 -07:00
Paul McQuade 7153e40273 ipc, kernel: use Linux headers
Use #include <linux/uaccess.h> instead of <asm/uaccess.h>
Use #include <linux/types.h> instead of <asm/types.h>

Signed-off-by: Paul McQuade <paulmcquad@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:14 -07:00
Mathias Krause eb66ec44f8 ipc: constify ipc_ops
There is no need to recreate the very same ipc_ops structure on every
kernel entry for msgget/semget/shmget.  Just declare it static and be
done with it.  While at it, constify it as we don't modify the structure
at runtime.

Found in the PaX patch, written by the PaX Team.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:14 -07:00
Davidlohr Bueso 3ab08fe204 ipc: remove braces for single statements
Deal with checkpatch messages:
     WARNING: braces {} are not necessary for single statement blocks

Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-27 21:02:39 -08:00
Davidlohr Bueso 8001c85810 ipc: standardize code comments
IPC commenting style is all over the place, *specially* in util.c.  This
patch orders things a bit.

Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-27 21:02:39 -08:00
Manfred Spraul 239521f31d ipc: whitespace cleanup
The ipc code does not adhere the typical linux coding style.
This patch fixes lots of simple whitespace errors.

- mostly autogenerated by
  scripts/checkpatch.pl -f --fix \
	--types=pointer_location,spacing,space_before_tab
- one manual fixup (keep structure members tab-aligned)
- removal of additional space_before_tab that were not found by --fix

Tested with some of my msg and sem test apps.

Andrew: Could you include it in -mm and move it towards Linus' tree?

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Suggested-by: Li Bin <huawei.libin@huawei.com>
Cc: Joe Perches <joe@perches.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-27 21:02:39 -08:00
Rafael Aquini 72a8ff2f92 ipc: change kern_ipc_perm.deleted type to bool
struct kern_ipc_perm.deleted is meant to be used as a boolean toggle, and
the changes introduced by this patch are just to make the case explicit.

Signed-off-by: Rafael Aquini <aquini@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Acked-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-27 21:02:39 -08:00
Rafael Aquini 0f3d2b0135 ipc: introduce ipc_valid_object() helper to sort out IPC_RMID races
After the locking semantics for the SysV IPC API got improved, a couple
of IPC_RMID race windows were opened because we ended up dropping the
'kern_ipc_perm.deleted' check performed way down in ipc_lock().  The
spotted races got sorted out by re-introducing the old test within the
racy critical sections.

This patch introduces ipc_valid_object() to consolidate the way we cope
with IPC_RMID races by using the same abstraction across the API
implementation.

Signed-off-by: Rafael Aquini <aquini@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-27 21:02:39 -08:00
Petr Mladek 78f5009cc3 ipc/sem.c: avoid overflow of semop undo (semadj) value
When trying to understand semop code, I found a small mistake in the check
for semadj (undo) value overflow.  The new undo value is not stored
immediately and next potential checks are done against the old value.

The failing scenario is not much practical.  One semop call has to do more
operations on the same semaphore.  Also semval and semadj must have
different values, so there has to be some operations without SEM_UNDO
flag.  For example:

	struct sembuf depositor_op[1];
	struct sembuf collector_op[2];

	depositor_op[0].sem_num = 0;
	depositor_op[0].sem_op = 20000;
	depositor_op[0].sem_flg = 0;

	collector_op[0].sem_num = 0;
	collector_op[0].sem_op = -10000;
	collector_op[0].sem_flg = SEM_UNDO;
	collector_op[1].sem_num = 0;
	collector_op[1].sem_op = -10000;
	collector_op[1].sem_flg = SEM_UNDO;

	if (semop(semid, depositor_op, 1) == -1)
		{ perror("Failed to do 1st deposit"); return 1; }

	if (semop(semid, collector_op, 2) == -1)
		{ perror("Failed to do 1st collect"); return 1; }

	if (semop(semid, depositor_op, 1) == -1)
		{ perror("Failed to do 2nd deposit"); return 1; }

	if (semop(semid, collector_op, 2) == -1)
		{ perror("Failed to do 2nd collect"); return 1; }

	return 0;

It passes without error now but the semadj value has overflown in the 2nd
collector operation.

[akpm@linux-foundation.org: restore lessened scope of local `undo']
[davidlohr@hp.com: correct header comment for perform_atomic_semop]
Signed-off-by: Petr Mladek <pmladek@suse.cz>
Acked-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-27 21:02:39 -08:00
Manfred Spraul 6e224f9459 ipc/sem.c: synchronize semop and semctl with IPC_RMID
After acquiring the semlock spinlock, operations must test that the
array is still valid.

 - semctl() and exit_sem() would walk stale linked lists (ugly, but
   should be ok: all lists are empty)

 - semtimedop() would sleep forever - and if woken up due to a signal -
   access memory after free.

The patch also:
 - standardizes the tests for .deleted, so that all tests in one
   function leave the function with the same approach.
 - unconditionally tests for .deleted immediately after every call to
   sem_lock - even it it means that for semctl(GETALL), .deleted will be
   tested twice.

Both changes make the review simpler: After every sem_lock, there must
be a test of .deleted, followed by a goto to the cleanup code (if the
function uses "goto cleanup").

The only exception is semctl_down(): If sem_ids().rwsem is locked, then
the presence in ids->ipcs_idr is equivalent to !.deleted, thus no
additional test is required.

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Mike Galbraith <efault@gmx.de>
Acked-by: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-16 21:35:52 -07:00
Manfred Spraul 0e8c665699 ipc/sem.c: update sem_otime for all operations
In commit 0a2b9d4c79 ("ipc/sem.c: move wake_up_process out of the
spinlock section"), the update of semaphore's sem_otime(last semop time)
was moved to one central position (do_smart_update).

But since do_smart_update() is only called for operations that modify
the array, this means that wait-for-zero semops do not update sem_otime
anymore.

The fix is simple:
Non-alter operations must update sem_otime.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Reported-by: Jia He <jiakernel@gmail.com>
Tested-by: Jia He <jiakernel@gmail.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-30 14:31:03 -07:00
Manfred Spraul d8c633766a ipc/sem.c: synchronize the proc interface
The proc interface is not aware of sem_lock(), it instead calls
ipc_lock_object() directly.  This means that simple semop() operations
can run in parallel with the proc interface.  Right now, this is
uncritical, because the implementation doesn't do anything that requires
a proper synchronization.

But it is dangerous and therefore should be fixed.

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-30 14:31:01 -07:00
Manfred Spraul 6d07b68ce1 ipc/sem.c: optimize sem_lock()
Operations that need access to the whole array must guarantee that there
are no simple operations ongoing.  Right now this is achieved by
spin_unlock_wait(sem->lock) on all semaphores.

If complex_count is nonzero, then this spin_unlock_wait() is not
necessary, because it was already performed in the past by the thread
that increased complex_count and even though sem_perm.lock was dropped
inbetween, no simple operation could have started, because simple
operations cannot start when complex_count is non-zero.

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Mike Galbraith <bitbucket@online.de>
Cc: Rik van Riel <riel@redhat.com>
Reviewed-by: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-30 14:31:01 -07:00
Manfred Spraul 5e9d527591 ipc/sem.c: fix race in sem_lock()
The exclusion of complex operations in sem_lock() is insufficient: after
acquiring the per-semaphore lock, a simple op must first check that
sem_perm.lock is not locked and only after that test check
complex_count.  The current code does it the other way around - and that
creates a race.  Details are below.

The patch is a complete rewrite of sem_lock(), based in part on the code
from Mike Galbraith.  It removes all gotos and all loops and thus the
risk of livelocks.

I have tested the patch (together with the next one) on my i3 laptop and
it didn't cause any problems.

The bug is probably also present in 3.10 and 3.11, but for these kernels
it might be simpler just to move the test of sma->complex_count after
the spin_is_locked() test.

Details of the bug:

Assume:
 - sma->complex_count = 0.
 - Thread 1: semtimedop(complex op that must sleep)
 - Thread 2: semtimedop(simple op).

Pseudo-Trace:

Thread 1: sem_lock(): acquire sem_perm.lock
Thread 1: sem_lock(): check for ongoing simple ops
			Nothing ongoing, thread 2 is still before sem_lock().
Thread 1: try_atomic_semop()
	<<< preempted.

Thread 2: sem_lock():
        static inline int sem_lock(struct sem_array *sma, struct sembuf *sops,
                                      int nsops)
        {
                int locknum;
         again:
                if (nsops == 1 && !sma->complex_count) {
                        struct sem *sem = sma->sem_base + sops->sem_num;

                        /* Lock just the semaphore we are interested in. */
                        spin_lock(&sem->lock);

                        /*
                         * If sma->complex_count was set while we were spinning,
                         * we may need to look at things we did not lock here.
                         */
                        if (unlikely(sma->complex_count)) {
                                spin_unlock(&sem->lock);
                                goto lock_array;
                        }
        <<<<<<<<<
	<<< complex_count is still 0.
	<<<
        <<< Here it is preempted
        <<<<<<<<<

Thread 1: try_atomic_semop() returns, notices that it must sleep.
Thread 1: increases sma->complex_count.
Thread 1: drops sem_perm.lock
Thread 2:
                /*
                 * Another process is holding the global lock on the
                 * sem_array; we cannot enter our critical section,
                 * but have to wait for the global lock to be released.
                 */
                if (unlikely(spin_is_locked(&sma->sem_perm.lock))) {
                        spin_unlock(&sem->lock);
                        spin_unlock_wait(&sma->sem_perm.lock);
                        goto again;
                }
	<<< sem_perm.lock already dropped, thus no "goto again;"

                locknum = sops->sem_num;

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Mike Galbraith <bitbucket@online.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: <stable@vger.kernel.org>	[3.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-30 14:31:01 -07:00
Davidlohr Bueso 53dad6d3a8 ipc: fix race with LSMs
Currently, IPC mechanisms do security and auditing related checks under
RCU.  However, since security modules can free the security structure,
for example, through selinux_[sem,msg_queue,shm]_free_security(), we can
race if the structure is freed before other tasks are done with it,
creating a use-after-free condition.  Manfred illustrates this nicely,
for instance with shared mem and selinux:

 -> do_shmat calls rcu_read_lock()
 -> do_shmat calls shm_object_check().
     Checks that the object is still valid - but doesn't acquire any locks.
     Then it returns.
 -> do_shmat calls security_shm_shmat (e.g. selinux_shm_shmat)
 -> selinux_shm_shmat calls ipc_has_perm()
 -> ipc_has_perm accesses ipc_perms->security

shm_close()
 -> shm_close acquires rw_mutex & shm_lock
 -> shm_close calls shm_destroy
 -> shm_destroy calls security_shm_free (e.g. selinux_shm_free_security)
 -> selinux_shm_free_security calls ipc_free_security(&shp->shm_perm)
 -> ipc_free_security calls kfree(ipc_perms->security)

This patch delays the freeing of the security structures after all RCU
readers are done.  Furthermore it aligns the security life cycle with
that of the rest of IPC - freeing them based on the reference counter.
For situations where we need not free security, the current behavior is
kept.  Linus states:

 "... the old behavior was suspect for another reason too: having the
  security blob go away from under a user sounds like it could cause
  various other problems anyway, so I think the old code was at least
  _prone_ to bugs even if it didn't have catastrophic behavior."

I have tested this patch with IPC testcases from LTP on both my
quad-core laptop and on a 64 core NUMA server.  In both cases selinux is
enabled, and tests pass for both voluntary and forced preemption models.
While the mentioned races are theoretical (at least no one as reported
them), I wanted to make sure that this new logic doesn't break anything
we weren't aware of.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-24 09:36:53 -07:00
Davidlohr Bueso d9a605e40b ipc: rename ids->rw_mutex
Since in some situations the lock can be shared for readers, we shouldn't
be calling it a mutex, rename it to rwsem.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:59:42 -07:00
Manfred Spraul 758a6ba39e ipc/sem.c: rename try_atomic_semop() to perform_atomic_semop(), docu update
Cleanup: Some minor points that I noticed while writing the previous
patches

1) The name try_atomic_semop() is misleading: The function performs the
   operation (if it is possible).

2) Some documentation updates.

No real code change, a rename and documentation changes.

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:28 -07:00
Manfred Spraul d12e1e50e4 ipc/sem.c: replace shared sem_otime with per-semaphore value
sem_otime contains the time of the last semaphore operation that
completed successfully.  Every operation updates this value, thus access
from multiple cpus can cause thrashing.

Therefore the patch replaces the variable with a per-semaphore variable.
The per-array sem_otime is only calculated when required.

No performance improvement on a single-socket i3 - only important for
larger systems.

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:28 -07:00
Manfred Spraul f269f40ad5 ipc/sem.c: always use only one queue for alter operations
There are two places that can contain alter operations:
 - the global queue: sma->pending_alter
 - the per-semaphore queues: sma->sem_base[].pending_alter.

Since one of the queues must be processed first, this causes an odd
priorization of the wakeups: complex operations have priority over
simple ops.

The patch restores the behavior of linux <=3.0.9: The longest waiting
operation has the highest priority.

This is done by using only one queue:
 - if there are complex ops, then sma->pending_alter is used.
 - otherwise, the per-semaphore queues are used.

As a side effect, do_smart_update_queue() becomes much simpler: no more
goto logic.

Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:28 -07:00