Internally the fact that say scale is shared across channels is
actually of remarkably little interest. Hence lets not store it.
Numerous devices have weird combinations of channels sharing
scale anyway so it is not as though this was really telling
us much. Note however that we do still use the shared sysfs
attrs thus massively reducing the number of attrs in complex
drivers.
Side effect is that certain drivers that were abusing this
(mostly my work) needed to do a few more checks on what the
channel they are being queried on actually is.
This is also helpful for in kernel interfaces where we
just want to query the scale and don't care whether it
is shared with other channels or not.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Currently the iio framework uses bitmasks for the address field of channel info
attributes. This is for historical reasons and no longer required since it will
only ever query a single info attribute at once. This patch changes the code to
use the non-shifted iio_chan_info_enum values for the info attribute address.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix a dumb lack of consideration of the effect of combining
the iio_device_unregister and iio_free_device calls into
one. There is no valid place to free some of the sysfs
array elements.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
No functional change, just a trivial tidy up so all drivers
do the same thing.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
V3 is a straightforward forward port to teh current tree of V2.
Simple fix is to just not cache REG_TEST (offset 8).
Cache doesn't help REG_TEST anyway since we write all 8 bits exactly once
(at resume/init time).
Also fix an "off-by-one" allocation of reg_cache[] array size that
was in the original code before I touched it.
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These are no longer needed.
Requires a few driver updates for places "sysfs.h" should have been
present but wasn't.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
After a voltage brownout, sensor will now operate correctly.
Page 10 of ISL29018 data sheet and the Intersil Application Note 1534
describe the required initialization sequence:
1. Write 0x00 to register 0x08 (TEST)
2. Write 0x00 to register 0x00 (CMD1)
3. msleep(1)
4. program remaining registers as before
Signed-off-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Bryan Freed <bfreed@chromium.org>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove the driver's get_sensor_data() interfaces and replace them with
iio_chan_spec channels. This converts 4 files to the new framework.
Driver ABI change: The intensity_infrared_raw file is now intensity_ir_raw.
Signed-off-by: Bryan Freed <bfreed@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The I2C clientdata is set to indio_dev instead of chip as of a couple weeks ago.
Correct the calls to i2c_get_clientdata() accordingly.
Otherwise the driver fails to initialize.
Signed-off-by: Bryan Freed <bfreed@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Defaulting to 1, this gives a way to amplify the lux value before being
reduced by the programmed adc_bit shift.
Only support whole numbers right now. When this driver is converted to the new
IIO_CHAN framework, it will be easy to support the framework's pseudo float.
Add illuminance0_calibscale documentation to sysfs-bus-iio-light.
Signed-off-by: Bryan Freed <bfreed@chromium.org>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This was suggested by Arnd Bergmann, Other elements may well
move in here in future, but it definitely makes sense for these.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Suggested by Arnd Bergmann. Note this will break ALL drivers that
are out of mainline. The fix is trivial change of
iio_allocate_device() -> iio_allocate_device(0)
Sorry if this causes issues for any one!
V2: Include new drivers in the update
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
adding support for the ISL 29018 ambient light and proximity sensor.
Addressed comments from reviews by Jonathan Cameron and Joe Perches
* Removed some excess dbg prints that only printed function name
* Renamed some properties to make them more descriptive
* Added a property to list available adc resolutions
* Defined arrays for resolutions/ranges as static const
* Change loops initialization to memset for extensibility.
* used sizeof() instead of ARRAY_SIZE() to be safer
* Added a property to list available adc ranges
* Fixed warnings and property names.
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron
Lars-Peter Clausen
Grant Grundler
Bryan Freed
Rhyland Klein