Commit Graph

9 Commits

Author SHA1 Message Date
Adam YH Lee 7cc97d77ee iio: adc: twl4030: Fix ADC[3:6] readings
MADC[3:6] reads incorrect values without these two following changes:

- enable the 3v1 bias regulator for ADC[3:6]
- configure ADC[3:6] lines as input, not as USB

Signed-off-by: Adam YH Lee <adam.yh.lee@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-03 10:27:18 +01:00
Greg Kroah-Hartman a732cd437b First set of IIO fixes for the 4.2 cycle.
* Fix a regression in hid sensors suspend time as a result of adding runtime
   pm.  The normal flow of waking up devices in order to go into suspend
   (given the devices are normally suspended when not reading) to a regression
   in suspend time on some laptops (reports of an additional 8 seconds).
   Fix this by checking to see if a user action resulting in the wake up, and
   make it a null operation if it didn't.  Note that for hid sensors, there is
   nothing useful to be done when moving into a full suspend from a runtime
   suspend so they might as well be left alone.
 * rochip_saradc: fix some missing MODULE_* data including the licence so that
   the driver does not taint the kernel incorrectly and can build as a module.
 * twl4030 - mark irq as oneshot as it always should have been.
 * inv-mpu - write formats for attributes not specified, leading to miss
   interpretation of the gyro scale channel when written.
 * Proximity ABI clarification.  This had snuck through as a mess.  Some
   drivers thought proximity went in one direction, some the other.  We went
   with the most common option, documented it and fixed up the drivers going
   the other way.  Fix for sx9500 included in this set.
 * ad624r - fix a wrong shift in the output data.
 * at91_adc - remove a false limit on the value of the STARTUP register
   applied by too small a type for the device tree parameter.
 * cm3323 - clear the bits when setting the integration time (otherwise
   we can only ever set more bits in the relevant field).
 * bmc150-accel - multiple triggers are registered, but on error were not being
   unwound in the opposite order leading to removal of triggers that had not
   yet successfully been registered (count down instead of up when unwinding).
 * tcs3414 - ensure right part of val / val2 pair read so that the integration
   time is not always 0.
 * cc10001_adc - bug in kconfig dependency. Use of OR when AND was intended.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJVpA2CAAoJEFSFNJnE9BaIJGEP/2uXFSqOZhmJ9sGqICSgKj4W
 OUjDtpXpKWxLC3Fypzvzg5u00R1t2likfvhXP2RsF5+/mqPb8NS6qzdcKMPCyxEl
 5tvsmYHm9yxN8o3ZZqtgYaR4mYt5tH4dFZ9qHpbFeNAXGjTRrYhGbgmLnND0v7cA
 5L1ABLls8ntoJ1aZZDsofwnmnUgclW5yqQZZ+huNkwaOpUQLke9tEL18cv+bsVgS
 zw7j/t3oJVdcUB9OTB7T/sW9J0+W7XnXogATHksHdHh2cd5N7wh/EZ1bet69QUrI
 PD2q2+0MUwyBMWDPveyWfm7XbS66lYxIRCmWZp+69Q1c/V91srhSPfh0kPcvHSQ1
 Uzpba6oSFPlFyDAtXWhaSEBzjXaHwKBIQvIVYOKiE6JdrbsnSg4GHAcF8TMhGtwT
 SDDgfb+cxOm6Vb4ws0+i15HMEiXpeK8AiJfHmLvau3OnA69/xzxHqqSg/oCO6/ES
 IzoAMqIVEk3L5gu88qgnmWzmyWp1pyTf1u+Kr+gAXNdSF/b3wgVkGn2X9hNRQ4g/
 XEFAD1PzarBnv1ce/HfWi+9/aUwv08nXHxBe4Yx3bfle2RUQKmFSbksVkCwu+ha3
 E4jPs5Cf9MrHO4gbuFaZX2+bFYlMdbcEWVRcP/3CHUuxeixGwemOsak1L+J5h6+e
 2xVEkGeywVdmDOsan1B8
 =mBqw
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-4.2a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First set of IIO fixes for the 4.2 cycle.

* Fix a regression in hid sensors suspend time as a result of adding runtime
  pm.  The normal flow of waking up devices in order to go into suspend
  (given the devices are normally suspended when not reading) to a regression
  in suspend time on some laptops (reports of an additional 8 seconds).
  Fix this by checking to see if a user action resulting in the wake up, and
  make it a null operation if it didn't.  Note that for hid sensors, there is
  nothing useful to be done when moving into a full suspend from a runtime
  suspend so they might as well be left alone.
* rochip_saradc: fix some missing MODULE_* data including the licence so that
  the driver does not taint the kernel incorrectly and can build as a module.
* twl4030 - mark irq as oneshot as it always should have been.
* inv-mpu - write formats for attributes not specified, leading to miss
  interpretation of the gyro scale channel when written.
* Proximity ABI clarification.  This had snuck through as a mess.  Some
  drivers thought proximity went in one direction, some the other.  We went
  with the most common option, documented it and fixed up the drivers going
  the other way.  Fix for sx9500 included in this set.
* ad624r - fix a wrong shift in the output data.
* at91_adc - remove a false limit on the value of the STARTUP register
  applied by too small a type for the device tree parameter.
* cm3323 - clear the bits when setting the integration time (otherwise
  we can only ever set more bits in the relevant field).
* bmc150-accel - multiple triggers are registered, but on error were not being
  unwound in the opposite order leading to removal of triggers that had not
  yet successfully been registered (count down instead of up when unwinding).
* tcs3414 - ensure right part of val / val2 pair read so that the integration
  time is not always 0.
* cc10001_adc - bug in kconfig dependency. Use of OR when AND was intended.
2015-07-13 14:18:07 -07:00
Fabio Estevam 6c0d48cb29 iio: twl4030-madc: Pass the IRQF_ONESHOT flag
Since commit 1c6c69525b ("genirq: Reject bogus threaded irq requests")
threaded IRQs without a primary handler need to be requested with
IRQF_ONESHOT, otherwise the request will fail.

So pass the IRQF_ONESHOT flag in this case.

The semantic patch that makes this change is available
in scripts/coccinelle/misc/irqf_oneshot.cocci.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-06-07 17:28:58 +01:00
H. Nikolaus Schaller 994bda83dc iio: adc: twl4030_madc: Fix description of twl4030_madc_set_current_generator()
The @chan parameter can be 0 or 1 and not a bit mask. Fix wrong description.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-06-07 17:25:55 +01:00
H. Nikolaus Schaller 0cbb39f143 iio: adc: twl4030_madc: Fix calculation of the temperature sense current
The bit mask to read the setting of the constant current source
for measuring the NTC voltage was the wrong one. Since default
value is initialized to the lowest level (000 = 10uA) the difference
was probably never noticed in practice.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-06-07 17:24:44 +01:00
Sanjeev Sharma 81816affea iio: remove .owner field for driver using module_platform_driver
This patch removes the .owner field for drivers which use the
platform_driver_register api because this is overriden in
_platform_driver_register.

Signed-off-by: Sanjeev Sharma <Sanjeev_Sharma@mentor.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-08-26 21:08:38 +01:00
Paul Kocialkowski e0326be0cd twl4030-madc: Request processed values in twl4030_get_madc_conversion
Not setting the raw parameter in the request causes it to be randomly
initialized to a value that might be different from zero or zero. This leads to
values that are randomly either raw or processed, making it very difficult to
make reliable use of the values.

Cc: Stable@vger.kernel.org
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Acked-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-06-02 21:53:27 +01:00
Paul Gortmaker 3c699105d0 mfd: Delete non-required instances of include <linux/init.h>
None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>.  Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19 08:58:07 +00:00
Sebastian Reichel b2931b98ce mfd: twl4030-madc: Move driver to drivers/iio/adc
This is a driver for an A/D converter, which belongs into
drivers/iio/adc.

Signed-off-by: Sebastian Reichel <sre@debian.org>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-18 08:16:20 +00:00