Commit Graph

12037 Commits

Author SHA1 Message Date
Vasanthakumar Thiagarajan ec30415f79 mac80211: Populate HT limitation with TKIP/WEP to the handler for SIOCSIWENCODE too
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:12:52 -04:00
Johannes Berg aae89831df wireless: radiotap updates
Radiotap was updated to include a "bad PLCP" flag and standardise
the "bad FCS" flag in the "flags" rather than "RX flags" field,
this patch updates Linux to that standard.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:12:52 -04:00
Johannes Berg 25420604c8 mac80211: stop queues across suspend/resume
Even though userland probably cannot submit packets, there might
still be some coming, and that's no good when the driver doesn't
expect them. Stop the queues across suspend/resume.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:12:52 -04:00
Johannes Berg b5bde374f0 mac80211: fix warnings in ieee80211_if_config
The last warning can never trigger, and the explicit AP_VLAN
check is pointless if we move the config_interface check down,
in practice config_interface is required anyway.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:12:52 -04:00
Helmut Schaa 11432379fd mac80211: start pending scan after probe/auth/assoc timed out
If a scan is queued in STA mode while the interface is in state direct
probe, authenticate or associate the scan is delayed until the interface
enters disabled or associated state. But in case of direct probe-,
authentication- or association- timeout sta_work will not be scheduled
anymore (without external trigger) and thus the pending scan is not
executed and prevents a new scan from being triggered (-EBUSY).

Fix this by queueing the sta work again after direct probe-, authentication-
and association- timeout.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:12:45 -04:00
Johannes Berg 176be728ee mac80211: remove ieee80211_num_regular_queues
This inline is useless and actually makes the code _longer_
rather than shorter.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:12:42 -04:00
Reinette Chatre 633e24ed95 cfg80211/nl80211: remove usage of CONFIG_NL80211
The scan capability added to cfg80211/nl80211 introduced a
dependency on nl80211 by cfg80211. We can thus no longer have
just cfg80211 without nl80211. Specifically, cfg80211_scan_done()
calls nl80211_send_scan_aborted() or nl80211_send_scan_done().

Now we remove the option for user to select nl80211. It will always
be compiled if user selects cfg80211.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:12:42 -04:00
Alina Friedrichsen fa56dddd67 mac80211: ieee80211_ibss_commit() cleanup
Don't call ieee80211_sta_find_ibss() directly, like it's done in STA
mode, so that the commit() call is more harmless respectively has
less site-effects.

Signed-off-by: Alina Friedrichsen <x-alina@gmx.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 20:12:41 -04:00
Linus Torvalds 3ae5080f4c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (37 commits)
  fs: avoid I_NEW inodes
  Merge code for single and multiple-instance mounts
  Remove get_init_pts_sb()
  Move common mknod_ptmx() calls into caller
  Parse mount options just once and copy them to super block
  Unroll essentials of do_remount_sb() into devpts
  vfs: simple_set_mnt() should return void
  fs: move bdev code out of buffer.c
  constify dentry_operations: rest
  constify dentry_operations: configfs
  constify dentry_operations: sysfs
  constify dentry_operations: JFS
  constify dentry_operations: OCFS2
  constify dentry_operations: GFS2
  constify dentry_operations: FAT
  constify dentry_operations: FUSE
  constify dentry_operations: procfs
  constify dentry_operations: ecryptfs
  constify dentry_operations: CIFS
  constify dentry_operations: AFS
  ...
2009-03-27 16:23:12 -07:00
Al Viro 3ba13d179e constify dentry_operations: rest
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-03-27 14:44:03 -04:00
Ingo Molnar 6e15cf0486 Merge branch 'core/percpu' into percpu-cpumask-x86-for-linus-2
Conflicts:
	arch/parisc/kernel/irq.c
	arch/x86/include/asm/fixmap_64.h
	arch/x86/include/asm/setup.h
	kernel/irq/handle.c

Semantic merge:
        arch/x86/include/asm/fixmap.h

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-27 17:28:43 +01:00
Alan Cox 83e0bbcbe2 af_rose/x25: Sanity check the maximum user frame size
Otherwise we can wrap the sizes and end up sending garbage.

Closes #10423

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-27 00:28:21 -07:00
Alan Cox 03ba999117 appletalk: this warning can go I think
Its past 2.2 ...

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-27 00:27:18 -07:00
Chuck Ebbert 7d0b591c65 xfrm: spin_lock() should be spin_unlock() in xfrm_state.c
spin_lock() should be spin_unlock() in xfrm_state_walk_done().

caused by:
commit 12a169e7d8
"ipsec: Put dumpers on the dump list"

Reported-by: Marc Milgram <mmilgram@redhat.com>
Signed-off-by: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-27 00:23:04 -07:00
Jesper Nilsson 71f6f6dfdf ipv6: Plug sk_buff leak in ipv6_rcv (net/ipv6/ip6_input.c)
Commit 778d80be52
(ipv6: Add disable_ipv6 sysctl to disable IPv6 operaion on specific interface)
seems to have introduced a leak of sk_buff's for ipv6 traffic,
at least in some configurations where idev is NULL, or when ipv6
is disabled via sysctl.

The problem is that if the first condition of the if-statement
returns non-NULL, it returns an skb with only one reference,
and when the other conditions apply, execution jumps to the "out"
label, which does not call kfree_skb for it.

To plug this leak, change to use the "drop" label instead.
(this relies on it being ok to call kfree_skb on NULL)
This also allows us to avoid calling rcu_read_unlock here,
and removes the only user of the "out" label.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-27 00:17:45 -07:00
David S. Miller 01e6de64d9 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6 2009-03-26 22:45:23 -07:00
Herbert Xu 8f1ead2d1a GRO: Disable GRO on legacy netif_rx path
When I fixed the GRO crash in the legacy receive path I used
napi_complete to replace __napi_complete.  Unfortunately they're
not the same when NETPOLL is enabled, which may result in us
not calling __napi_complete at all.

What's more, we really do need to keep the __napi_complete call
within the IRQ-off section since in theory an IRQ can occur in
between and fill up the backlog to the maximum, causing us to
lock up.

Since we can't seem to find a fix that works properly right now,
this patch reverts all the GRO support from the netif_rx path.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26 22:24:28 -07:00
Linus Torvalds 8e9d208972 Merge branch 'bkl-removal' of git://git.lwn.net/linux-2.6
* 'bkl-removal' of git://git.lwn.net/linux-2.6:
  Rationalize fasync return values
  Move FASYNC bit handling to f_op->fasync()
  Use f_lock to protect f_flags
  Rename struct file->f_ep_lock
2009-03-26 16:14:02 -07:00
David S. Miller 08abe18af1 Merge branch 'master' of /home/davem/src/GIT/linux-2.6/
Conflicts:
	drivers/net/wimax/i2400m/usb-notif.c
2009-03-26 15:23:24 -07:00
Linus Torvalds 0c93ea4064 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (61 commits)
  Dynamic debug: fix pr_fmt() build error
  Dynamic debug: allow simple quoting of words
  dynamic debug: update docs
  dynamic debug: combine dprintk and dynamic printk
  sysfs: fix some bin_vm_ops errors
  kobject: don't block for each kobject_uevent
  sysfs: only allow one scheduled removal callback per kobj
  Driver core: Fix device_move() vs. dpm list ordering, v2
  Driver core: some cleanup on drivers/base/sys.c
  Driver core: implement uevent suppress in kobject
  vcs: hook sysfs devices into object lifetime instead of "binding"
  driver core: fix passing platform_data
  driver core: move platform_data into platform_device
  sysfs: don't block indefinitely for unmapped files.
  driver core: move knode_bus into private structure
  driver core: move knode_driver into private structure
  driver core: move klist_children into private structure
  driver core: create a private portion of struct device
  driver core: remove polling for driver_probe_done(v5)
  sysfs: reference sysfs_dirent from sysfs inodes
  ...

Fixed conflicts in drivers/sh/maple/maple.c manually
2009-03-26 11:17:04 -07:00
Linus Torvalds 562f477a54 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (29 commits)
  crypto: sha512-s390 - Add missing block size
  hwrng: timeriomem - Breaks an allyesconfig build on s390:
  nlattr: Fix build error with NET off
  crypto: testmgr - add zlib test
  crypto: zlib - New zlib crypto module, using pcomp
  crypto: testmgr - Add support for the pcomp interface
  crypto: compress - Add pcomp interface
  netlink: Move netlink attribute parsing support to lib
  crypto: Fix dead links
  hwrng: timeriomem - New driver
  crypto: chainiv - Use kcrypto_wq instead of keventd_wq
  crypto: cryptd - Per-CPU thread implementation based on kcrypto_wq
  crypto: api - Use dedicated workqueue for crypto subsystem
  crypto: testmgr - Test skciphers with no IVs
  crypto: aead - Avoid infinite loop when nivaead fails selftest
  crypto: skcipher - Avoid infinite loop when cipher fails selftest
  crypto: api - Fix crypto_alloc_tfm/create_create_tfm return convention
  crypto: api - crypto_alg_mod_lookup either tested or untested
  crypto: amcc - Add crypt4xx driver
  crypto: ansi_cprng - Add maintainer
  ...
2009-03-26 11:04:34 -07:00
Holger Eitzenberger d271e8bd8c ctnetlink: compute generic part of event more acurately
On a box with most of the optional Netfilter switches turned off some
of the NLAs are never send, e. g. secmark, mark or the conntrack
byte/packet counters.  As a worst case scenario this may possibly
still lead to ctnetlink skbs being reallocated in netlink_trim()
later, loosing all the nice effects from the previous patches.

I try to solve that (at least partly) by correctly #ifdef'ing the
NLAs in the computation.

Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-26 13:37:14 +01:00
David S. Miller f0de70f8bb Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2009-03-26 01:22:01 -07:00
Rami Rosen ede5ad0e29 net: core: remove unneeded include in net/core/utils.c.
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26 01:11:48 -07:00
Eric Leblond 7249dee5bd netfilter: fix nf_logger name in ebt_ulog.
This patch renames the ebt_ulog nf_logger from "ulog" to "ebt_ulog" to
be in sync with other modules naming. As this name was currently only
used for informational purpose, the renaming should be harmless.

Signed-off-by: Eric Leblond <eric@inl.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26 01:04:28 -07:00
Eric Leblond 3b334d427c netfilter: fix warning in ebt_ulog init function.
The ebt_ulog module does not follow the fixed convention about function
return. Loading the module is triggering the following message:

sys_init_module: 'ebt_ulog'->init suspiciously returned 1, it should follow 0/-E convention
sys_init_module: loading module anyway...
Pid: 2334, comm: modprobe Not tainted 2.6.29-rc5edenwall0-00883-g199e57b #146
Call Trace:
 [<c0441b81>] ? printk+0xf/0x16
 [<c02311af>] sys_init_module+0x107/0x186
 [<c0202cfa>] syscall_call+0x7/0xb

The following patch fixes the return treatment in ebt_ulog_init()
function.

Signed-off-by: Eric Leblond <eric@inl.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26 01:04:02 -07:00
Eric Leblond 704b3ea3b9 netfilter: fix warning about invalid const usage
This patch fixes the declaration of the logger structure in ebt_log
and ebt_ulog: I forgot to remove the const option from their declaration
in the commit ca735b3aaa ("netfilter:
use a linked list of loggers").

Pointed-out-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Eric Leblond <eric@inl.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26 01:03:23 -07:00
Stephen Hemminger cda6d377ec bridge: bad error handling when adding invalid ether address
This fixes an crash when empty bond device is added to a bridge.
If an interface with invalid ethernet address (all zero) is added
to a bridge, then bridge code detects it when setting up the forward
databas entry. But the error unwind is broken, the bridge port object 
can get freed twice: once when ref count went to zeo, and once by kfree.
Since object is never really accessible, just free it.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-25 21:01:47 -07:00
Holger Eitzenberger a400c30edb netfilter: nf_conntrack: calculate per-protocol nlattr size
Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-25 21:53:39 +01:00
Holger Eitzenberger 5c0de29d06 netfilter: nf_conntrack: add generic function to get len of generic policy
Usefull for all protocols which do not add additional data, such
as GRE or UDPlite.

Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-25 21:52:17 +01:00
Holger Eitzenberger 2732c4e45b netfilter: ctnetlink: allocate right-sized ctnetlink skb
Try to allocate a Netlink skb roughly the size of the actual
message, with the help from the l3 and l4 protocol helpers.
This is all to prevent a reallocation in netlink_trim() later.

The overhead of allocating the right-sized skb is rather small, with
ctnetlink_alloc_skb() actually being inlined away on my x86_64 box.
The size of the per-proto space is determined at registration time of
the protocol helper.

Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-25 21:50:59 +01:00
Eric Dumazet ea781f197d netfilter: nf_conntrack: use SLAB_DESTROY_BY_RCU and get rid of call_rcu()
Use "hlist_nulls" infrastructure we added in 2.6.29 for RCUification of UDP & TCP.

This permits an easy conversion from call_rcu() based hash lists to a
SLAB_DESTROY_BY_RCU one.

Avoiding call_rcu() delay at nf_conn freeing time has numerous gains.

First, it doesnt fill RCU queues (up to 10000 elements per cpu).
This reduces OOM possibility, if queued elements are not taken into account
This reduces latency problems when RCU queue size hits hilimit and triggers
emergency mode.

- It allows fast reuse of just freed elements, permitting better use of
CPU cache.

- We delete rcu_head from "struct nf_conn", shrinking size of this structure
by 8 or 16 bytes.

This patch only takes care of "struct nf_conn".
call_rcu() is still used for less critical conntrack parts, that may
be converted later if necessary.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-25 21:05:46 +01:00
Patrick McHardy 1f9352ae22 netfilter: {ip,ip6,arp}_tables: fix incorrect loop detection
Commit e1b4b9f ([NETFILTER]: {ip,ip6,arp}_tables: fix exponential worst-case
search for loops) introduced a regression in the loop detection algorithm,
causing sporadic incorrectly detected loops.

When a chain has already been visited during the check, it is treated as
having a standard target containing a RETURN verdict directly at the
beginning in order to not check it again. The real target of the first
rule is then incorrectly treated as STANDARD target and checked not to
contain invalid verdicts.

Fix by making sure the rule does actually contain a standard target.

Based on patch by Francis Dupont <Francis_Dupont@isc.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-25 19:26:35 +01:00
Holger Eitzenberger af9d32ad67 netfilter: limit the length of the helper name
This is necessary in order to have an upper bound for Netlink
message calculation, which is not a problem at all, as there
are no helpers with a longer name.

Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-25 18:44:01 +01:00
Holger Eitzenberger e487eb99cf netlink: add nla_policy_len()
It calculates the max. length of a Netlink policy, which is usefull
for allocating Netlink buffers roughly the size of the actual
message.

Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-25 18:26:30 +01:00
Holger Eitzenberger d0dba7255b netfilter: ctnetlink: add callbacks to the per-proto nlattrs
There is added a single callback for the l3 proto helper.  The two
callbacks for the l4 protos are necessary because of the general
structure of a ctnetlink event, which is in short:

 CTA_TUPLE_ORIG
   <l3/l4-proto-attributes>
 CTA_TUPLE_REPLY
   <l3/l4-proto-attributes>
 CTA_ID
 ...
 CTA_PROTOINFO
   <l4-proto-attributes>
 CTA_TUPLE_MASTER
   <l3/l4-proto-attributes>

Therefore the formular is

 size := sizeof(generic-nlas) + 3 * sizeof(tuple_nlas) + sizeof(protoinfo_nlas)

Some of the NLAs are optional, e. g. CTA_TUPLE_MASTER, which is only
set if it's an expected connection.  But the number of optional NLAs is
small enough to prevent netlink_trim() from reallocating if calculated
properly.

Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-25 18:24:48 +01:00
Eric Dumazet b8dfe49877 netfilter: factorize ifname_compare()
We use same not trivial helper function in four places. We can factorize it.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-25 17:31:52 +01:00
Eric Dumazet 78f3648601 netfilter: nf_conntrack: use hlist_add_head_rcu() in nf_conntrack_set_hashsize()
Using hlist_add_head() in nf_conntrack_set_hashsize() is quite dangerous.
Without any barrier, one CPU could see a loop while doing its lookup.
Its true new table cannot be seen by another cpu, but previous table is still
readable.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-25 17:24:34 +01:00
Patrick McHardy a9a9adfe2f netfilter: fix xt_LED build failure
net/netfilter/xt_LED.c:40: error: field netfilter_led_trigger has incomplete type
net/netfilter/xt_LED.c: In function led_timeout_callback:
net/netfilter/xt_LED.c:78: warning: unused variable ledinternal
net/netfilter/xt_LED.c: In function led_tg_check:
net/netfilter/xt_LED.c:102: error: implicit declaration of function led_trigger_register
net/netfilter/xt_LED.c: In function led_tg_destroy:
net/netfilter/xt_LED.c:135: error: implicit declaration of function led_trigger_unregister

Fix by adding a dependency on LED_TRIGGERS.

Reported-by: Sachin Sant <sachinp@in.ibm.com>
Tested-by: Subrata Modak <tosubrata@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-25 17:21:34 +01:00
Vlad Yasevich b2f5e7cd3d ipv6: Fix conflict resolutions during ipv6 binding
The ipv6 version of bind_conflict code calls ipv6_rcv_saddr_equal()
which at times wrongly identified intersections between addresses.
It particularly broke down under a few instances and caused erroneous
bind conflicts.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24 19:49:11 -07:00
Vlad Yasevich 63d9950b08 ipv6: Make v4-mapped bindings consistent with IPv4
Binding to a v4-mapped address on an AF_INET6 socket should
produce the same result as binding to an IPv4 address on
AF_INET socket.  The two are interchangable as v4-mapped
address is really a portability aid.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24 19:49:10 -07:00
Vlad Yasevich 0f8d3c7ac3 ipv6: Allow ipv4 wildcard binds after ipv6 address binds
The IPv4 wildcard (0.0.0.0) address does not intersect
in any way with explicit IPv6 addresses.  These two should
be permitted, but the IPv4 conflict code checks the ipv6only
bit as part of the test.  Since binding to an explicit IPv6
address restricts the socket to only that IPv6 address, the
side-effect is that the socket behaves as v6-only.  By
explicitely setting ipv6only in this case, allows the 2 binds
to succeed.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24 19:49:10 -07:00
Vlad Yasevich 783ed5a783 ipv6: Disallow binding to v4-mapped address on v6-only socket.
A socket marked v6-only, can not receive or send traffic to v4-mapped
addresses.  Thus allowing binding to v4-mapped address on such a
socket makes no sense.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24 19:49:09 -07:00
David S. Miller c80dd2da73 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6 2009-03-24 16:38:53 -07:00
Jason Baron e9d376f0fa dynamic debug: combine dprintk and dynamic printk
This patch combines Greg Bank's dprintk() work with the existing dynamic
printk patchset, we are now calling it 'dynamic debug'.

The new feature of this patchset is a richer /debugfs control file interface,
(an example output from my system is at the bottom), which allows fined grained
control over the the debug output. The output can be controlled by function,
file, module, format string, and line number.

for example, enabled all debug messages in module 'nf_conntrack':

echo -n 'module nf_conntrack +p' > /mnt/debugfs/dynamic_debug/control

to disable them:

echo -n 'module nf_conntrack -p' > /mnt/debugfs/dynamic_debug/control

A further explanation can be found in the documentation patch.

Signed-off-by: Greg Banks <gnb@sgi.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:38:26 -07:00
Cornelia Huck ffa6a7054d Driver core: Fix device_move() vs. dpm list ordering, v2
dpm_list currently relies on the fact that child devices will
be registered after their parents to get a correct suspend
order. Using device_move() however destroys this assumption, as
an already registered device may be moved under a newly registered
one.

This patch adds a new argument to device_move(), allowing callers
to specify how dpm_list should be adapted.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:38:26 -07:00
Pablo Neira Ayuso 38938bfe34 netlink: add NETLINK_NO_ENOBUFS socket flag
This patch adds the NETLINK_NO_ENOBUFS socket flag. This flag can
be used by unicast and broadcast listeners to avoid receiving
ENOBUFS errors.

Generally speaking, ENOBUFS errors are useful to notify two things
to the listener:

a) You may increase the receiver buffer size via setsockopt().
b) You have lost messages, you may be out of sync.

In some cases, ignoring ENOBUFS errors can be useful. For example:

a) nfnetlink_queue: this subsystem does not have any sort of resync
method and you can decide to ignore ENOBUFS once you have set a
given buffer size.

b) ctnetlink: you can use this together with the socket flag
NETLINK_BROADCAST_SEND_ERROR to stop getting ENOBUFS errors as
you do not need to resync (packets whose event are not delivered
are drop to provide reliable logging and state-synchronization).

Moreover, the use of NETLINK_NO_ENOBUFS also reduces a "go up, go down"
effect in terms of performance which is due to the netlink congestion
control when the listener cannot back off. The effect is the following:

1) throughput rate goes up and netlink messages are inserted in the
receiver buffer.
2) Then, netlink buffer fills and overruns (set on nlk->state bit 0).
3) While the listener empties the receiver buffer, netlink keeps
dropping messages. Thus, throughput goes dramatically down.
4) Then, once the listener has emptied the buffer (nlk->state
bit 0 is set off), goto step 1.

This effect is easy to trigger with netlink broadcast under heavy
load, and it is more noticeable when using a big receiver buffer.
You can find some results in [1] that show this problem.

[1] http://1984.lsi.us.es/linux/netlink/

This patch also includes the use of sk_drop to account the number of
netlink messages drop due to overrun. This value is shown in
/proc/net/netlink.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24 16:37:55 -07:00
Eric Dumazet 35c7f6de73 arp_tables: ifname_compare() can assume 16bit alignment
Arches without efficient unaligned access can still perform a loop
assuming 16bit alignment in ifname_compare()

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24 14:15:22 -07:00
Jan Engelhardt 8dd1d0471b netfilter: trivial Kconfig spelling fixes
Supplements commit 67c0d57930.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24 13:35:27 -07:00
David S. Miller b5bb14386e Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6 2009-03-24 13:24:36 -07:00
Eric Dumazet 1d45209d89 netfilter: nf_conntrack: Reduce conntrack count in nf_conntrack_free()
We use RCU to defer freeing of conntrack structures. In DOS situation, RCU might
accumulate about 10.000 elements per CPU in its internal queues. To get accurate
conntrack counts (at the expense of slightly more RAM used), we might consider
conntrack counter not taking into account "about to be freed elements, waiting
in RCU queues". We thus decrement it in nf_conntrack_free(), not in the RCU
callback.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Tested-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-24 14:26:50 +01:00
Vitaly Mayatskikh 30842f2989 udp: Wrong locking code in udp seq_file infrastructure
Reading zero bytes from /proc/net/udp or other similar files which use
the same seq_file udp infrastructure panics kernel in that way:

=====================================
[ BUG: bad unlock balance detected! ]
-------------------------------------
read/1985 is trying to release lock (&table->hash[i].lock) at:
[<ffffffff81321d83>] udp_seq_stop+0x27/0x29
but there are no more locks to release!

other info that might help us debug this:
1 lock held by read/1985:
 #0:  (&p->lock){--..}, at: [<ffffffff810eefb6>] seq_read+0x38/0x348

stack backtrace:
Pid: 1985, comm: read Not tainted 2.6.29-rc8 #9
Call Trace:
 [<ffffffff81321d83>] ? udp_seq_stop+0x27/0x29
 [<ffffffff8106dab9>] print_unlock_inbalance_bug+0xd6/0xe1
 [<ffffffff8106db62>] lock_release_non_nested+0x9e/0x1c6
 [<ffffffff810ef030>] ? seq_read+0xb2/0x348
 [<ffffffff8106bdba>] ? mark_held_locks+0x68/0x86
 [<ffffffff81321d83>] ? udp_seq_stop+0x27/0x29
 [<ffffffff8106dde7>] lock_release+0x15d/0x189
 [<ffffffff8137163c>] _spin_unlock_bh+0x1e/0x34
 [<ffffffff81321d83>] udp_seq_stop+0x27/0x29
 [<ffffffff810ef239>] seq_read+0x2bb/0x348
 [<ffffffff810eef7e>] ? seq_read+0x0/0x348
 [<ffffffff8111aedd>] proc_reg_read+0x90/0xaf
 [<ffffffff810d878f>] vfs_read+0xa6/0x103
 [<ffffffff8106bfac>] ? trace_hardirqs_on_caller+0x12f/0x153
 [<ffffffff810d88a2>] sys_read+0x45/0x69
 [<ffffffff8101123a>] system_call_fastpath+0x16/0x1b
BUG: scheduling while atomic: read/1985/0xffffff00
INFO: lockdep is turned off.
Modules linked in: cpufreq_ondemand acpi_cpufreq freq_table dm_multipath kvm ppdev snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep snd_seq_dummy snd_seq_oss snd_seq_midi_event arc4 snd_s
eq ecb thinkpad_acpi snd_seq_device iwl3945 hwmon sdhci_pci snd_pcm_oss sdhci rfkill mmc_core snd_mixer_oss i2c_i801 mac80211 yenta_socket ricoh_mmc i2c_core iTCO_wdt snd_pcm iTCO_vendor_support rs
rc_nonstatic snd_timer snd lib80211 cfg80211 soundcore snd_page_alloc video parport_pc output parport e1000e [last unloaded: scsi_wait_scan]
Pid: 1985, comm: read Not tainted 2.6.29-rc8 #9
Call Trace:
 [<ffffffff8106b456>] ? __debug_show_held_locks+0x1b/0x24
 [<ffffffff81043660>] __schedule_bug+0x7e/0x83
 [<ffffffff8136ede9>] schedule+0xce/0x838
 [<ffffffff810d7972>] ? fsnotify_access+0x5f/0x67
 [<ffffffff810112d0>] ? sysret_careful+0xb/0x37
 [<ffffffff8106be9c>] ? trace_hardirqs_on_caller+0x1f/0x153
 [<ffffffff8137127b>] ? trace_hardirqs_on_thunk+0x3a/0x3f
 [<ffffffff810112f6>] sysret_careful+0x31/0x37
read[1985]: segfault at 7fffc479bfe8 ip 0000003e7420a180 sp 00007fffc479bfa0 error 6
Kernel panic - not syncing: Aiee, killing interrupt handler!

udp_seq_stop() tries to unlock not yet locked spinlock. The lock was lost
during splitting global udp_hash_lock to subsequent spinlocks.

Signed-off by: Vitaly Mayatskikh <v.mayatskih@gmail.com>
Acked-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-23 15:22:33 -07:00
David S. Miller 8be7cdccac Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/ucc_geth.c
2009-03-23 13:35:04 -07:00
Linus Torvalds d56ffd38a9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (32 commits)
  ucc_geth: Fix oops when using fixed-link support
  dm9000: locking bugfix
  net: update dnet.c for bus_id removal
  dnet: DNET should depend on HAS_IOMEM
  dca: add missing copyright/license headers
  nl80211: Check that function pointer != NULL before using it
  sungem: missing net_device_ops
  be2net: fix to restore vlan ids into BE2 during a IF DOWN->UP cycle
  be2net: replenish when posting to rx-queue is starved in out of mem conditions
  bas_gigaset: correctly allocate USB interrupt transfer buffer
  smsc911x: reset last known duplex and carrier on open
  sh_eth: Fix mistake of the address of SH7763
  sh_eth: Change handling of IRQ
  netns: oops in ip[6]_frag_reasm incrementing stats
  net: kfree(napi->skb) => kfree_skb
  net: fix sctp breakage
  ipv6: fix display of local and remote sit endpoints
  net: Document /proc/sys/net/core/netdev_budget
  tulip: fix crash on iface up with shirq debug
  virtio_net: Make virtio_net support carrier detection
  ...
2009-03-23 09:25:58 -07:00
Mark H. Weaver 534f81a506 netfilter: nf_conntrack_tcp: fix unaligned memory access in tcp_sack
This patch fixes an unaligned memory access in tcp_sack while reading
sequence numbers from TCP selective acknowledgement options.  Prior to
applying this patch, upstream linux-2.6.27.20 was occasionally
generating messages like this on my sparc64 system:

  [54678.532071] Kernel unaligned access at TPC[6b17d4] tcp_packet+0xcd4/0xd00

Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-23 13:46:12 +01:00
Pablo Neira Ayuso dd5b6ce6fd nefilter: nfnetlink: add nfnetlink_set_err and use it in ctnetlink
This patch adds nfnetlink_set_err() to propagate the error to netlink
broadcast listener in case of memory allocation errors in the
message building.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-23 13:21:06 +01:00
Eric Leblond 176252746e netfilter: sysctl support of logger choice
This patchs adds support of modification of the used logger via sysctl.
It can be used to change the logger to module that can not use the bind
operation (ipt_LOG and ipt_ULOG). For this purpose, it creates a
directory /proc/sys/net/netfilter/nf_log which contains a file
per-protocol. The content of the file is the name current logger (NONE if
not set) and a logger can be setup by simply echoing its name to the file.
By echoing "NONE" to a /proc/sys/net/netfilter/nf_log/PROTO file, the
logger corresponding to this PROTO is set to NULL.

Signed-off-by: Eric Leblond <eric@inl.fr>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-23 13:16:53 +01:00
John Dykstra 96e0bf4b51 tcp: Discard segments that ack data not yet sent
Discard incoming packets whose ack field iincludes data not yet sent.
This is consistent with RFC 793 Section 3.9.

Change tcp_ack() to distinguish between too-small and too-large ack
field values.  Keep segments with too-large ack fields out of the fast
path, and change slow path to discard them.

Reported-by:  Oliver Zheng <mailinglists+netdev@oliverzheng.com>
Signed-off-by: John Dykstra <john.dykstra1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-22 21:49:57 -07:00
Stephen Hemminger d44c3a2e0e netdev: expose net_device_ops compat as config option
Now that most network device drivers in (all but one in x86_64 allmodconfig)
support net_device_ops. Expose it as a configuration parameter. Still
need to address even older 32 bit drivers, and other arch before
compatiablity can be scheduled for removal in some future release.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 22:55:36 -07:00
Stephen Hemminger 9cc8ba783d irlan: convert to net_device_ops
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 19:19:16 -07:00
Stephen Hemminger 92bcd4fe9a irda: net_device_ops ioctl fix
Need to reference net_device_ops not old pointer.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 19:19:14 -07:00
Stephen Hemminger dde0975855 atm: convert clip driver to net_device_ops
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 19:19:12 -07:00
Stephen Hemminger 788dee0a95 atm: convert mpc device to using netdev_ops
This converts the mpc device to using new netdevice_ops.
Compile tested only, needs more than usual review since
device was swaping pointers around etc.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Chas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 19:19:12 -07:00
Lennert Buytenhek e84665c9cb dsa: add switch chip cascading support
The initial version of the DSA driver only supported a single switch
chip per network interface, while DSA-capable switch chips can be
interconnected to form a tree of switch chips.  This patch adds support
for multiple switch chips on a network interface.

An example topology for a 16-port device with an embedded CPU is as
follows:

	+-----+          +--------+       +--------+
	|     |eth0    10| switch |9    10| switch |
	| CPU +----------+        +-------+        |
	|     |          | chip 0 |       | chip 1 |
	+-----+          +---++---+       +---++---+
	                     ||               ||
	                     ||               ||
	                     ||1000baseT      ||1000baseT
	                     ||ports 1-8      ||ports 9-16

This requires a couple of interdependent changes in the DSA layer:

- The dsa platform driver data needs to be extended: there is still
  only one netdevice per DSA driver instance (eth0 in the example
  above), but each of the switch chips in the tree needs its own
  mii_bus device pointer, MII management bus address, and port name
  array. (include/net/dsa.h)  The existing in-tree dsa users need
  some small changes to deal with this. (arch/arm)

- The DSA and Ethertype DSA tagging modules need to be extended to
  use the DSA device ID field on receive and demultiplex the packet
  accordingly, and fill in the DSA device ID field on transmit
  according to which switch chip the packet is heading to.
  (net/dsa/tag_{dsa,edsa}.c)

- The concept of "CPU port", which is the switch chip port that the
  CPU is connected to (port 10 on switch chip 0 in the example), needs
  to be extended with the concept of "upstream port", which is the
  port on the switch chip that will bring us one hop closer to the CPU
  (port 10 for both switch chips in the example above).

- The dsa platform data needs to specify which ports on which switch
  chips are links to other switch chips, so that we can enable DSA
  tagging mode on them.  (For inter-switch links, we always use
  non-EtherType DSA tagging, since it has lower overhead.  The CPU
  link uses dsa or edsa tagging depending on what the 'root' switch
  chip supports.)  This is done by specifying "dsa" for the given
  port in the port array.

- The dsa platform data needs to be extended with information on via
  which port to reach any given switch chip from any given switch chip.
  This info is specified via the per-switch chip data struct ->rtable[]
  array, which gives the nexthop ports for each of the other switches
  in the tree.

For the example topology above, the dsa platform data would look
something like this:

	static struct dsa_chip_data sw[2] = {
		{
			.mii_bus	= &foo,
			.sw_addr	= 1,
			.port_names[0]	= "p1",
			.port_names[1]	= "p2",
			.port_names[2]	= "p3",
			.port_names[3]	= "p4",
			.port_names[4]	= "p5",
			.port_names[5]	= "p6",
			.port_names[6]	= "p7",
			.port_names[7]	= "p8",
			.port_names[9]	= "dsa",
			.port_names[10]	= "cpu",
			.rtable		= (s8 []){ -1, 9, },
		}, {
			.mii_bus	= &foo,
			.sw_addr	= 2,
			.port_names[0]	= "p9",
			.port_names[1]	= "p10",
			.port_names[2]	= "p11",
			.port_names[3]	= "p12",
			.port_names[4]	= "p13",
			.port_names[5]	= "p14",
			.port_names[6]	= "p15",
			.port_names[7]	= "p16",
			.port_names[10]	= "dsa",
			.rtable		= (s8 []){ 10, -1, },
		},
	},

	static struct dsa_platform_data pd = {
		.netdev		= &foo,
		.nr_switches	= 2,
		.sw		= sw,
	};

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Tested-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 19:06:54 -07:00
Lennert Buytenhek 076d3e10a5 dsa: add support for the Marvell 88E6095/6095F switch chips
Add support for the Marvell 88E6095/6095F switch chips.  These
chips are similar to the 88e6131, so we can add the support to
mv88e6131.c easily.

Thanks to Gary Thomas <gary@mlbassoc.com> and Jesper Dangaard
Brouer <hawk@diku.dk> for testing various patches.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Tested-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 19:06:54 -07:00
Lennert Buytenhek c084080151 dsa: set ->iflink on slave interfaces to the ifindex of the parent
..so that we can parse the DSA topology from 'ip link' output:

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000
4: lan1@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
5: lan2@eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue
6: lan3@eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue
7: lan4@eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 19:06:53 -07:00
Stephen Hemminger fa665ccf01 ipx: use constant for strings and desciptor
Fix compiler warning about non-const format string.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 19:06:51 -07:00
Stephen Hemminger 7ca98fa234 snap: use const for descriptor
Protocols should be able to use constant value for the descriptor.
Minor whitespace cleanup as well

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 19:06:50 -07:00
Eric Dumazet ed734a97c6 net: remove useless prefetch() call
There is no gain using prefetch() in dev_hard_start_xmit(), since
we already had to read ops->ndo_select_queue pointer in dev_pick_tx(),
and both pointers are probably located in the same cache line.

This prefetch call slows down fast path because of a stall in address
computation.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 13:42:55 -07:00
Vlad Yasevich 8d2f9e8116 sctp: Clean up TEST_FRAME hacks.
Remove 2 TEST_FRAME hacks that are no longer needed.  These allowed
sctp regression tests to compile before, but are no longer needed.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 13:41:09 -07:00
Stephen Hemminger 9247744e5e skb: expose and constify hash primitives
Some minor changes to queue hashing:
 1. Use const on accessor functions
 2. Export skb_tx_hash for use in drivers (see ixgbe)

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 13:39:26 -07:00
Stephen Hemminger 1f1900f935 atm: lec use dev_change_mtu
Rather than calling device pointer directly (which is incorrect with
net_device_ops), use the standard dev_change_mtu. Compile tested only.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 13:37:28 -07:00
Ilpo Järvinen a0bffffc14 net/*: use linux/kernel.h swap()
tcp_sack_swap seems unnecessary so I pushed swap to the caller.
Also removed comment that seemed then pointless, and added include
when not already there. Compile tested.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 13:36:17 -07:00
Bernard Pidoux a3ac80a130 netrom: zero length frame filtering in NetRom
A zero length frame filter was recently introduced in ROSE protocole.
Previous commit makes the same at AX25 protocole level.
This patch has the same purpose for NetRom  protocole.
The reason is that empty frames have no meaning in NetRom protocole.

Signed-off-by: Bernard Pidoux <f6bvp@amsat.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 13:34:20 -07:00
Bernard Pidoux f99bcff7a2 ax25: zero length frame filtering in AX25
In previous commit 244f46ae6e
was introduced a zero length frame filter for ROSE protocole.
This patch has the same purpose at AX25 frame level for the same
reason. Empty frames have no meaning in AX25 protocole.

Signed-off-by: Bernard Pidoux <f6bvp@amsat.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 13:33:55 -07:00
Bernard Pidoux 60784427ab ax25: SOCK_DEBUG message simplification
This patch condenses two debug messages in one.

Signed-off-by: Bernard Pidoux <f6bvp@amsat.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 13:33:18 -07:00
Jouni Malinen f3f9258678 nl80211: Check that function pointer != NULL before using it
NL80211_CMD_GET_MESH_PARAMS and NL80211_CMD_SET_MESH_PARAMS handlers
did not verify whether a function pointer is NULL (not supported by
the driver) before trying to call the function. The former nl80211
command is available for unprivileged users, too, so this can
potentially allow normal users to kill networking (or worse..) if
mac80211 is built without CONFIG_MAC80211_MESH=y.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-20 16:01:57 -04:00
David S. Miller 2b1c4354de Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/virtio_net.c
2009-03-20 02:27:41 -07:00
Jorge Boncompte [DTI2] 2bad35b7c9 netns: oops in ip[6]_frag_reasm incrementing stats
dev can be NULL in ip[6]_frag_reasm for skb's coming from RAW sockets.

Quagga's OSPFD sends fragmented packets on a RAW socket, when netfilter
conntrack reassembles them on the OUTPUT path you hit this code path.

You can test it with something like "hping2 -0 -d 2000 -f AA.BB.CC.DD"

With help from Jarek Poplawski.

Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18 23:26:11 -07:00
Roel Kluin e4a389a9b5 net: kfree(napi->skb) => kfree_skb
struct sk_buff pointers should be freed with kfree_skb.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18 23:12:13 -07:00
Al Viro cb0dc77de0 net: fix sctp breakage
broken by commit 5e739d1752aca4e8f3e794d431503bfca3162df4; AFAICS should
be -stable fodder as well...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Aced-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18 19:12:42 -07:00
Stephen Hemminger 4b704d59d6 tipc: fix non-const printf format arguments
Fix warnings from current gcc about using non-const strings as printf
args in TIPC. Compile tested only (not a TIPC user).

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18 19:11:29 -07:00
Bjørn Mork 1b1d8f73a4 ipv6: fix display of local and remote sit endpoints
This fixes the regressions cause by
commit 1326c3d5a4
(v2.6.28-rc6-461-g23a12b1) broke the display of local and remote
addresses of an SIT tunnel in iproute2.

nt->parms is used by ipip6_tunnel_init() and therefore need to be
initialized first.

Tracked as http://bugzilla.kernel.org/show_bug.cgi?id=12868

Reported-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18 18:56:54 -07:00
Rami Rosen beedad923a tcp: remove parameter from tcp_recv_urg().
This patch removes an unused parameter (addr_len) from tcp_recv_urg()
method in net/ipv4/tcp.c.

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18 18:50:09 -07:00
Brian Haley 9bdd8d40c8 ipv6: Fix incorrect disable_ipv6 behavior
Fix the behavior of allowing both sysctl and addrconf_dad_failure()
to set the disable_ipv6 parameter without any bad side-effects.
If DAD fails and accept_dad > 1, we will still set disable_ipv6=1,
but then instead of allowing an RA to add an address then
immediately fail DAD, we simply don't allow the address to be
added in the first place.  This also lets the user set this flag
and disable all IPv6 addresses on the interface, or on the entire
system.

Signed-off-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-18 18:22:48 -07:00
Patrick McHardy 0f5b3e85a3 netfilter: ctnetlink: fix rcu context imbalance
Introduced by 7ec47496 (netfilter: ctnetlink: cleanup master conntrack assignation):

net/netfilter/nf_conntrack_netlink.c:1275:2: warning: context imbalance in 'ctnetlink_create_conntrack' - different lock contexts for basic block

Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-18 17:36:40 +01:00
Florian Westphal 711d60a9e7 netfilter: remove nf_ct_l4proto_find_get/nf_ct_l4proto_put
users have been moved to __nf_ct_l4proto_find.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-18 17:30:50 +01:00
Florian Westphal cd91566e4b netfilter: ctnetlink: remove remaining module refcounting
Convert the remaining refcount users.

As pointed out by Patrick McHardy, the protocols can be accessed safely using RCU.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-03-18 17:28:37 +01:00
David S. Miller af4330631c Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 2009-03-17 15:04:31 -07:00
David S. Miller 2d6a5e9500 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/igb/igb_main.c
	drivers/net/qlge/qlge_main.c
	drivers/net/wireless/ath9k/ath9k.h
	drivers/net/wireless/ath9k/core.h
	drivers/net/wireless/ath9k/hw.c
2009-03-17 15:01:30 -07:00
David S. Miller f10023a4ef Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 2009-03-17 14:29:22 -07:00
David S. Miller 4ada8107f4 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6 2009-03-17 13:12:47 -07:00
Herbert Xu 303c6a0251 gro: Fix legacy path napi_complete crash
On the legacy netif_rx path, I incorrectly tried to optimise
the napi_complete call by using __napi_complete before we reenable
IRQs.  This simply doesn't work since we need to flush the held
GRO packets first.

This patch fixes it by doing the obvious thing of reenabling
IRQs first and then calling napi_complete.

Reported-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-17 13:11:29 -07:00
Herbert Xu 2ffb455819 gro: Fix vlan/netpoll check again
Jarek Poplawski pointed out that my previous fix is broken for
VLAN+netpoll as if netpoll is enabled we'd end up in the normal
receive path instead of the VLAN receive path.

This patch fixes it by calling the VLAN receive hook.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-17 13:10:52 -07:00
Luis R. Rodriguez 73d54c9e74 cfg80211: add regulatory netlink multicast group
This allows us to send to userspace "regulatory" events.
For now we just send an event when we change regulatory domains.
We also notify userspace when devices are using their own custom
world roaming regulatory domains.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16 18:09:40 -04:00
Luis R. Rodriguez 7db90f4a25 cfg80211: move enum reg_set_by to nl80211.h
We do this so we can later inform userspace who set the
regulatory domain and provide details of the request.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16 18:09:40 -04:00
Luis R. Rodriguez 0fee54cab7 cfg80211: remove REGDOM_SET_BY_INIT
This is not used as we can always just assume the first
regulatory domain set will _always_ be a static regulatory
domain. REGDOM_SET_BY_CORE will be the first request from
cfg80211 for a regdomain and that then populates the first
regulatory request.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16 18:09:39 -04:00
Herton Ronaldo Krzesinski 1a28c78b46 mac80211: deauth before flushing STA information
Even after commit "mac80211: deauth when interface is marked down"
(e327b847 on Linus tree), userspace still isn't notified when interface
goes down. There isn't a problem with this commit, but because of other
code changes it doesn't work on kernels >= 2.6.28 (works if same/similar
change applied on 2.6.27 for example).

The issue is as follows: after commit "mac80211: restructure disassoc/deauth
flows" in 2.6.28, the call to ieee80211_sta_deauthenticate added by
commit e327b847 will not work: because we do sta_info_flush(local, sdata)
inside ieee80211_stop (iface.c), all stations in interface are cleared, so
when calling ieee80211_sta_deauthenticate->ieee80211_set_disassoc (mlme.c),
inside ieee80211_set_disassoc we have this in the beginning:

         sta = sta_info_get(local, ifsta->bssid);
         if (!sta) {

The !sta check triggers, thus the function returns early and
ieee80211_sta_send_apinfo(sdata, ifsta) later isn't called, so
wpa_supplicant/userspace isn't notified with SIOCGIWAP.

This commit moves deauthentication to before flushing STA info
(sta_info_flush), thus the above can't happen and userspace is really
notified when interface goes down.

Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16 18:09:39 -04:00
Helmut Schaa af88b9078d mac80211: handle failed scan requests in STA mode
If cfg80211 requests a scan it awaits either a return code != 0 from
the scan function or the cfg80211_scan_done to be called. In case of
a STA mac80211's scan function ever returns 0 and queues the scan request.
If ieee80211_sta_work is executed and ieee80211_start_scan fails for
some reason cfg80211_scan_done will never be called but cfg80211 still
thinks the scan was triggered successfully and will refuse any future
scan requests due to drv->scan_req not being cleaned up.

If a scan is triggered from within the MLME a similar problem appears. If
ieee80211_start_scan returns an error, local->scan_req will not be reset
and mac80211 will refuse any future scan requests.

Hence, in both cases call ieee80211_scan_failed (which notifies cfg80211
and resets local->scan_req) if ieee80211_start_scan returns an error.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16 18:09:38 -04:00
Luis R. Rodriguez ec329acef9 cfg80211: fix max tx power for world regdom on 5 GHz to 20dBm
This is the lowest value amongst countries which do enable 5 GHz operation.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16 18:09:29 -04:00