Commit Graph

128 Commits

Author SHA1 Message Date
Heinz Mauelshagen ac6a318888 dm raid: bump target version
Bumo dm-raid target version to 1.12.1 to reflect that commit cc27b0c78c
("md: fix deadlock between mddev_suspend() and md_write_start()") is
available.

This version change allows userspace to detect that MD fix is available.

Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-07-25 14:54:20 -04:00
Damien Le Moal 3b1a94c88b dm zoned: drive-managed zoned block device target
The dm-zoned device mapper target provides transparent write access
to zoned block devices (ZBC and ZAC compliant block devices).
dm-zoned hides to the device user (a file system or an application
doing raw block device accesses) any constraint imposed on write
requests by the device, equivalent to a drive-managed zoned block
device model.

Write requests are processed using a combination of on-disk buffering
using the device conventional zones and direct in-place processing for
requests aligned to a zone sequential write pointer position.
A background reclaim process implemented using dm_kcopyd_copy ensures
that conventional zones are always available for executing unaligned
write requests. The reclaim process overhead is minimized by managing
buffer zones in a least-recently-written order and first targeting the
oldest buffer zones. Doing so, blocks under regular write access (such
as metadata blocks of a file system) remain stored in conventional
zones, resulting in no apparent overhead.

dm-zoned implementation focus on simplicity and on minimizing overhead
(CPU, memory and storage overhead). For a 14TB host-managed disk with
256 MB zones, dm-zoned memory usage per disk instance is at most about
3 MB and as little as 5 zones will be used internally for storing metadata
and performing buffer zone reclaim operations. This is achieved using
zone level indirection rather than a full block indirection system for
managing block movement between zones.

dm-zoned primary target is host-managed zoned block devices but it can
also be used with host-aware device models to mitigate potential
device-side performance degradation due to excessive random writing.

Zoned block devices can be formatted and checked for use with the dm-zoned
target using the dmzadm utility available at:

https://github.com/hgst/dm-zoned-tools

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
[Mike Snitzer partly refactored Damien's original work to cleanup the code]
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-06-19 11:05:20 -04:00
Linus Torvalds d35a878ae1 - A major update for DM cache that reduces the latency for deciding
whether blocks should migrate to/from the cache.  The bio-prison-v2
   interface supports this improvement by enabling direct dispatch of
   work to workqueues rather than having to delay the actual work
   dispatch to the DM cache core.  So the dm-cache policies are much more
   nimble by being able to drive IO as they see fit.  One immediate
   benefit from the improved latency is a cache that should be much more
   adaptive to changing workloads.
 
 - Add a new DM integrity target that emulates a block device that has
   additional per-sector tags that can be used for storing integrity
   information.
 
 - Add a new authenticated encryption feature to the DM crypt target that
   builds on the capabilities provided by the DM integrity target.
 
 - Add MD interface for switching the raid4/5/6 journal mode and update
   the DM raid target to use it to enable aid4/5/6 journal write-back
   support.
 
 - Switch the DM verity target over to using the asynchronous hash crypto
   API (this helps work better with architectures that have access to
   off-CPU algorithm providers, which should reduce CPU utilization).
 
 - Various request-based DM and DM multipath fixes and improvements from
   Bart and Christoph.
 
 - A DM thinp target fix for a bio structure leak that occurs for each
   discard IFF discard passdown is enabled.
 
 - A fix for a possible deadlock in DM bufio and a fix to re-check the
   new buffer allocation watermark in the face of competing admin changes
   to the 'max_cache_size_bytes' tunable.
 
 - A couple DM core cleanups.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJZB6vtAAoJEMUj8QotnQNaoicIALuZTLElgAzxzA28cfk1+1Ea
 Gd09CfJ3M6cvk/YGUU7WwiSYIwu16yOJALG4sLcYnEmUCzvKfFPcl/RpeSJHPpYM
 0aVXa6NIJw7K2r3C17toiK2DRMHYw6QU843WeWI93vBW13lDJklNJL9fM7GBEOLH
 NMSNw2mAq9ajtLlnJhM3ZfhloA7/u/jektvlBO1AA3RQ5Kx1cXVXFPqN7FdRfcqp
 4RuEMe9faAadlXLsj3bia5IBmF/W0Qza6JilP+NLKLWB4fm7LZDjN/k+TsHWMa9e
 cGR73TgUGLMBJX+sDJy8R3oeBG9JZkFVkD7I30eCjzyhSOs/54XNYQ23EkqHJU0=
 =9Ryi
 -----END PGP SIGNATURE-----

Merge tag 'for-4.12/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - A major update for DM cache that reduces the latency for deciding
   whether blocks should migrate to/from the cache. The bio-prison-v2
   interface supports this improvement by enabling direct dispatch of
   work to workqueues rather than having to delay the actual work
   dispatch to the DM cache core. So the dm-cache policies are much more
   nimble by being able to drive IO as they see fit. One immediate
   benefit from the improved latency is a cache that should be much more
   adaptive to changing workloads.

 - Add a new DM integrity target that emulates a block device that has
   additional per-sector tags that can be used for storing integrity
   information.

 - Add a new authenticated encryption feature to the DM crypt target
   that builds on the capabilities provided by the DM integrity target.

 - Add MD interface for switching the raid4/5/6 journal mode and update
   the DM raid target to use it to enable aid4/5/6 journal write-back
   support.

 - Switch the DM verity target over to using the asynchronous hash
   crypto API (this helps work better with architectures that have
   access to off-CPU algorithm providers, which should reduce CPU
   utilization).

 - Various request-based DM and DM multipath fixes and improvements from
   Bart and Christoph.

 - A DM thinp target fix for a bio structure leak that occurs for each
   discard IFF discard passdown is enabled.

 - A fix for a possible deadlock in DM bufio and a fix to re-check the
   new buffer allocation watermark in the face of competing admin
   changes to the 'max_cache_size_bytes' tunable.

 - A couple DM core cleanups.

* tag 'for-4.12/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (50 commits)
  dm bufio: check new buffer allocation watermark every 30 seconds
  dm bufio: avoid a possible ABBA deadlock
  dm mpath: make it easier to detect unintended I/O request flushes
  dm mpath: cleanup QUEUE_IF_NO_PATH bit manipulation by introducing assign_bit()
  dm mpath: micro-optimize the hot path relative to MPATHF_QUEUE_IF_NO_PATH
  dm: introduce enum dm_queue_mode to cleanup related code
  dm mpath: verify __pg_init_all_paths locking assumptions at runtime
  dm: verify suspend_locking assumptions at runtime
  dm block manager: remove an unused argument from dm_block_manager_create()
  dm rq: check blk_mq_register_dev() return value in dm_mq_init_request_queue()
  dm mpath: delay requeuing while path initialization is in progress
  dm mpath: avoid that path removal can trigger an infinite loop
  dm mpath: split and rename activate_path() to prepare for its expanded use
  dm ioctl: prevent stack leak in dm ioctl call
  dm integrity: use previously calculated log2 of sectors_per_block
  dm integrity: use hex2bin instead of open-coded variant
  dm crypt: replace custom implementation of hex2bin()
  dm crypt: remove obsolete references to per-CPU state
  dm verity: switch to using asynchronous hash crypto API
  dm crypt: use WQ_HIGHPRI for the IO and crypt workqueues
  ...
2017-05-03 10:31:20 -07:00
Mikulas Patocka 9d609f85b7 dm integrity: support larger block sizes
The DM integrity block size can now be 512, 1k, 2k or 4k.  Using larger
blocks reduces metadata handling overhead.  The block size can be
configured at table load time using the "block_size:<value>" option;
where <value> is expressed in bytes (defult is still 512 bytes).

It is safe to use larger block sizes with DM integrity, because the
DM integrity journal makes sure that the whole block is updated
atomically even if the underlying device doesn't support atomic writes
of that size (e.g. 4k block ontop of a 512b device).

Depends-on: 2859323e ("block: fix blk_integrity_register to use template's interval_exp if not 0")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-04-24 12:04:33 -04:00
Mikulas Patocka 56b67a4f29 dm integrity: various small changes and cleanups
Some coding style changes.

Fix a bug that the array test_tag has insufficient size if the digest
size of internal has is bigger than the tag size.

The function __fls is undefined for zero argument, this patch fixes
undefined behavior if the user sets zero interleave_sectors.

Fix the limit of optional arguments to 8.

Don't allocate crypt_data on the stack to avoid a BUG with debug kernel.

Rename all optional argument names to have underscores rather than
dashes.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-04-24 12:04:32 -04:00
Heinz Mauelshagen 6e53636fe8 dm raid: add raid4/5/6 journal write-back support via journal_mode option
Commit 63c32ed4af ("dm raid: add raid4/5/6 journaling support") added
journal support to close the raid4/5/6 "write hole" -- in terms of
writethrough caching.

Introduce a "journal_mode" feature and use the new
r5c_journal_mode_set() API to add support for switching the journal
device's cache mode between write-through (the current default) and
write-back.

NOTE: If the journal device is not layered on resilent storage and it
fails, write-through mode will cause the "write hole" to reoccur.  But
if the journal fails while in write-back mode it will cause data loss
for any dirty cache entries unless resilent storage is used for the
journal.

Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-27 12:08:07 -04:00
Heinz Mauelshagen 4464e36e06 dm raid: fix table line argument order in status
Commit 3a1c1ef2f ("dm raid: enhance status interface and fixup
takeover/raid0") added new table line arguments and introduced an
ordering flaw.  The sequence of the raid10_copies and raid10_format
raid parameters got reversed which causes lvm2 userspace to fail by
falsely assuming a changed table line.

Sequence those 2 parameters as before so that old lvm2 can function
properly with new kernels by adjusting the table line output as
documented in Documentation/device-mapper/dm-raid.txt.

Also, add missing version 1.10.1 highlight to the documention.

Fixes: 3a1c1ef2f ("dm raid: enhance status interface and fixup takeover/raid0")
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-27 11:45:26 -04:00
Mikulas Patocka c2bcb2b702 dm integrity: add recovery mode
In recovery mode, we don't:
- replay the journal
- check checksums
- allow writes to the device

This mode can be used as a last resort for data recovery.  The
motivation for recovery mode is that when there is a single error in the
journal, the user should not lose access to the whole device.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-24 15:54:23 -04:00
Milan Broz 8f0009a225 dm crypt: optionally support larger encryption sector size
Add  optional "sector_size"  parameter that specifies encryption sector
size (atomic unit of block device encryption).

Parameter can be in range 512 - 4096 bytes and must be power of two.
For compatibility reasons, the maximal IO must fit into the page limit,
so the limit is set to the minimal page size possible (4096 bytes).

NOTE: this device cannot yet be handled by cryptsetup if this parameter
is set.

IV for the sector is calculated from the 512 bytes sector offset unless
the iv_large_sectors option is used.

Test script using dmsetup:

  DEV="/dev/sdb"
  DEV_SIZE=$(blockdev --getsz $DEV)
  KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac"
  BLOCK_SIZE=4096

  # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE"
  # dmsetup table --showkeys test_crypt

Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-24 15:54:21 -04:00
Milan Broz 33d2f09fcb dm crypt: introduce new format of cipher with "capi:" prefix
For the new authenticated encryption we have to support generic composed
modes (combination of encryption algorithm and authenticator) because
this is how the kernel crypto API accesses such algorithms.

To simplify the interface, we accept an algorithm directly in crypto API
format.  The new format is recognised by the "capi:" prefix.  The
dmcrypt internal IV specification is the same as for the old format.

The crypto API cipher specifications format is:
     capi:cipher_api_spec-ivmode[:ivopts]
Examples:
     capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256)
     capi:xts(aes)-plain64      (equivalent to old aes-xts-plain64)
Examples of authenticated modes:
     capi:gcm(aes)-random
     capi:authenc(hmac(sha256),xts(aes))-random
     capi:rfc7539(chacha20,poly1305)-random

Authenticated modes can only be configured using the new cipher format.
Note that this format allows user to specify arbitrary combinations that
can be insecure. (Policy decision is done in cryptsetup userspace.)

Authenticated encryption algorithms can be of two types, either native
modes (like GCM) that performs both encryption and authentication
internally, or composed modes where user can compose AEAD with separate
specification of encryption algorithm and authenticator.

For composed mode with HMAC (length-preserving encryption mode like an
XTS and HMAC as an authenticator) we have to calculate HMAC digest size
(the separate authentication key is the same size as the HMAC digest).
Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get
HMAC algorithm and retrieve digest size from it.

Also, for HMAC composed mode we need to parse the crypto API string to
get the cipher mode nested in the specification.  For native AEAD mode
(like GCM), we can use crypto_tfm_alg_name() API to get the cipher
specification.

Because the HMAC composed mode is not processed the same as the native
AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and
"hmac" specification for the table integrity argument is removed.

Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-24 15:54:20 -04:00
Milan Broz ef43aa3806 dm crypt: add cryptographic data integrity protection (authenticated encryption)
Allow the use of per-sector metadata, provided by the dm-integrity
module, for integrity protection and persistently stored per-sector
Initialization Vector (IV).  The underlying device must support the
"DM-DIF-EXT-TAG" dm-integrity profile.

The per-bio integrity metadata is allocated by dm-crypt for every bio.

Example of low-level mapping table for various types of use:
 DEV=/dev/sdb
 SIZE=417792

 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key
 SIZE_INT=389952
 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0"
 dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \
 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \
 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \
 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)"

 # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs
 # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space)
 SIZE_INT=393024
 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0"
 dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \
 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \
 0 /dev/mapper/x 0 1 integrity:28:aead"

 # Random IV only for XTS mode (no integrity protection but provides atomic random sector change)
 SIZE_INT=401272
 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0"
 dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \
 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \
 0 /dev/mapper/x 0 1 integrity:16:none"

 # Random IV with XTS + HMAC integrity protection
 SIZE_INT=377656
 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0"
 dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \
 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \
 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \
 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)"

Both AEAD and HMAC protection authenticates not only data but also
sector metadata.

HMAC protection is implemented through autenc wrapper (so it is
processed the same way as an authenticated mode).

In HMAC mode there are two keys (concatenated in dm-crypt mapping
table).  First is the encryption key and the second is the key for
authentication (HMAC).  (It is userspace decision if these keys are
independent or somehow derived.)

The sector request for AEAD/HMAC authenticated encryption looks like this:
 |----- AAD -------|------ DATA -------|-- AUTH TAG --|
 | (authenticated) | (auth+encryption) |              |
 | sector_LE |  IV |  sector in/out    |  tag in/out  |

For writes, the integrity fields are calculated during AEAD encryption
of every sector and stored in bio integrity fields and sent to
underlying dm-integrity target for storage.

For reads, the integrity metadata is verified during AEAD decryption of
every sector (they are filled in by dm-integrity, but the integrity
fields are pre-allocated in dm-crypt).

There is also an experimental support in cryptsetup utility for more
friendly configuration (part of LUKS2 format).

Because the integrity fields are not valid on initial creation, the
device must be "formatted".  This can be done by direct-io writes to the
device (e.g. dd in direct-io mode).  For now, there is available trivial
tool to do this, see: https://github.com/mbroz/dm_int_tools

Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Vashek Matyas <matyas@fi.muni.cz>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-24 15:49:41 -04:00
Mikulas Patocka 7eada909bf dm: add integrity target
The dm-integrity target emulates a block device that has additional
per-sector tags that can be used for storing integrity information.

A general problem with storing integrity tags with every sector is that
writing the sector and the integrity tag must be atomic - i.e. in case of
crash, either both sector and integrity tag or none of them is written.

To guarantee write atomicity the dm-integrity target uses a journal. It
writes sector data and integrity tags into a journal, commits the journal
and then copies the data and integrity tags to their respective location.

The dm-integrity target can be used with the dm-crypt target - in this
situation the dm-crypt target creates the integrity data and passes them
to the dm-integrity target via bio_integrity_payload attached to the bio.
In this mode, the dm-crypt and dm-integrity targets provide authenticated
disk encryption - if the attacker modifies the encrypted device, an I/O
error is returned instead of random data.

The dm-integrity target can also be used as a standalone target, in this
mode it calculates and verifies the integrity tag internally. In this
mode, the dm-integrity target can be used to detect silent data
corruption on the disk or in the I/O path.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-24 15:49:07 -04:00
sayli karnik 3f816bac24 Documentation: device-mapper: cache.txt: Fix typos
Fix a spelling error (hexidecimal->hexadecimal).

Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-03-19 09:16:07 -06:00
Masahiro Yamada 34dcaf40c1 scripts/spelling.txt: add "explictely" pattern and fix typo instances
Fix typos and add the following to the scripts/spelling.txt:

  explictely||explicitly

Link: http://lkml.kernel.org/r/1481573103-11329-25-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:47 -08:00
Joe Thornber 629d0a8a1a dm cache metadata: add "metadata2" feature
If "metadata2" is provided as a table argument when creating/loading a
cache target a more compact metadata format, with separate dirty bits,
is used.  "metadata2" improves speed of shutting down a cache target.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-02-16 13:12:47 -05:00
Heinz Mauelshagen 63c32ed4af dm raid: add raid4/5/6 journaling support
Add md raid4/5/6 journaling support (upstream commit bac624f3f8 started
the implementation) which closes the write hole (i.e. non-atomic updates
to stripes) using a dedicated journal device.

Background:
raid4/5/6 stripes hold N data payloads per stripe plus one parity raid4/5
or two raid6 P/Q syndrome payloads in an in-memory stripe cache.
Parity or P/Q syndromes used to recover any data payloads in case of a disk
failure are calculated from the N data payloads and need to be updated on the
different component devices of the raid device.  Those are non-atomic,
persistent updates.  Hence a crash can cause failure to update all stripe
payloads persistently and thus cause data loss during stripe recovery.
This problem gets addressed by writing whole stripe cache entries (together with
journal metadata) to a persistent journal entry on a dedicated journal device.
Only if that journal entry is written successfully, the stripe cache entry is
updated on the component devices of the raid device (i.e. writethrough type).
In case of a crash, the entry can be recovered from the journal and be written
again thus ensuring consistent stripe payload suitable to data recovery.

Future dependencies:
once writeback caching being worked on to compensate for the throughput
implictions involved with writethrough overhead is supported with journaling
in upstream, an additional patch based on this one will support it in dm-raid.

Journal resilience related remarks:
because stripes are recovered from the journal in case of a crash, the
journal device better be resilient.  Resilience becomes mandatory with
future writeback support, because loosing the working set in the log
means data loss as oposed to writethrough, were the loss of the
journal device 'only' reintroduces the write hole.

Fix comment on data offsets in parse_dev_params() and initialize
new_data_offset as well.

Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-25 12:49:06 +01:00
Heinz Mauelshagen c63ede3b42 dm raid: fix transient device failure processing
This fix addresses the following 3 failure scenarios:

1) If a (transiently) inaccessible metadata device is being passed into the
constructor (e.g. a device tuple '254:4 254:5'), it is processed as if
'- -' was given.  This erroneously results in a status table line containing
'- -', which mistakenly differs from what has been passed in.  As a result,
userspace libdevmapper puts the device tuple seperate from the RAID device
thus not processing the dependencies properly.

2) False health status char 'A' instead of 'D' is emitted on the status
status info line for the meta/data device tuple in this metadata device
failure case.

3) If the metadata device is accessible when passed into the constructor
but the data device (partially) isn't, that leg may be set faulty by the
raid personality on access to the (partially) unavailable leg.  Restore
tried in a second raid device resume on such failed leg (status char 'D')
fails after the (partial) leg returned.

Fixes for aforementioned failure scenarios:

- don't release passed in devices in the constructor thus allowing the
  status table line to e.g. contain '254:4 254:5' rather than '- -'

- emit device status char 'D' rather than 'A' for the device tuple
  with the failed metadata device on the status info line

- when attempting to restore faulty devices in a second resume, allow the
  device hot remove function to succeed by setting the device to not in-sync

In case userspace intentionally passes '- -' into the constructor to avoid that
device tuple (e.g. to split off a raid1 leg temporarily for later re-addition),
the status table line will correctly show '- -' and the status info line will
provide a '-' device health character for the non-defined device tuple.

Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-01-25 12:49:06 +01:00
Linus Torvalds a9042defa2 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial updates from Jiri Kosina.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  NTB: correct ntb_spad_count comment typo
  misc: ibmasm: fix typo in error message
  Remove references to dead make variable LINUX_INCLUDE
  Remove last traces of ikconfig.h
  treewide: Fix printk() message errors
  Documentation/device-mapper: s/getsize/getsz/
2016-12-14 11:12:25 -08:00
Michael Witten 95f21c5c6d Documentation/device-mapper: s/getsize/getsz/
According to `man blockdev':

  --getsize
         Print device size (32-bit!) in sectors.
         Deprecated in favor of the --getsz option.
  ...
  --getsz
         Get size in 512-byte sectors.

Hence, occurrences of `--getsize' should be replaced with `--getsz',
which this commit has achieved as follows:

  $ cd "$repo"
  $ git grep -l -e --getsz
  Documentation/device-mapper/delay.txt
  Documentation/device-mapper/dm-crypt.txt
  Documentation/device-mapper/linear.txt
  Documentation/device-mapper/log-writes.txt
  Documentation/device-mapper/striped.txt
  Documentation/device-mapper/switch.txt
  $ cd Documentation/device-mapper
  $ sed -i s/getsize/getsz/g *

Signed-off-by: Michael Witten <mfwitten@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-12-14 10:54:27 +01:00
Heinz Mauelshagen 58fc4fedee Documentation: dm raid: define data_offset status field
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-12-08 14:13:13 -05:00
Ondrej Kozina c538f6ec9f dm crypt: add ability to use keys from the kernel key retention service
The kernel key service is a generic way to store keys for the use of
other subsystems. Currently there is no way to use kernel keys in dm-crypt.
This patch aims to fix that. Instead of key userspace may pass a key
description with preceding ':'. So message that constructs encryption
mapping now looks like this:

  <cipher> [<key>|:<key_string>] <iv_offset> <dev_path> <start> [<#opt_params> <opt_params>]

where <key_string> is in format: <key_size>:<key_type>:<key_description>

Currently we only support two elementary key types: 'user' and 'logon'.
Keys may be loaded in dm-crypt either via <key_string> or using
classical method and pass the key in hex representation directly.

dm-crypt device initialised with a key passed in hex representation may be
replaced with key passed in key_string format and vice versa.

(Based on original work by Andrey Ryabinin)

Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-12-08 14:13:09 -05:00
Masanari Iida bb1423a96f dm raid: fix typos in Documentation/device-mapper/dm-raid.txt
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-11-21 09:52:04 -05:00
Heinz Mauelshagen b052b07c39 dm raid: fix activation of existing raid4/10 devices
dm-raid 1.9.0 fails to activate existing RAID4/10 devices that have the
old superblock format (which does not have takeover/reshaping support
that was added via commit 33e53f0685).

Fix validation path for old superblocks by reverting to the old raid4
layout and basing checks on mddev->new_{level,layout,...} members in
super_init_validation().

Cc: stable@vger.kernel.org # 4.8
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-10-17 16:41:31 -04:00
Jens Axboe 1eff9d322a block: rename bio bi_rw to bi_opf
Since commit 63a4cc2486, bio->bi_rw contains flags in the lower
portion and the op code in the higher portions. This means that
old code that relies on manually setting bi_rw is most likely
going to be broken. Instead of letting that brokeness linger,
rename the member, to force old and out-of-tree code to break
at compile time instead of at runtime.

No intended functional changes in this commit.

Signed-off-by: Jens Axboe <axboe@fb.com>
2016-08-07 14:41:02 -06:00
Heinz Mauelshagen d41bfed091 dm raid: update Documentation about reshaping/takeover/additonal RAID types
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-06-14 18:52:12 -04:00
Mike Christie 28a8f0d317 block, drivers, fs: rename REQ_FLUSH to REQ_PREFLUSH
To avoid confusion between REQ_OP_FLUSH, which is handled by
request_fn drivers, and upper layers requesting the block layer
perform a flush sequence along with possibly a WRITE, this patch
renames REQ_FLUSH to REQ_PREFLUSH.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07 13:41:38 -06:00
Eric Engestrom 52813d4046 dm stats: fix spelling mistake in Documentation
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-05-05 15:25:54 -04:00
Mike Snitzer 492d48db8d dm cache: update cache-policies.txt now that mq is an alias for smq
Also fix some typos and make all "smq" and "mq" references consistently
lowercase.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-05-05 15:25:53 -04:00
Joe Thornber 9ed84698fd dm cache: make the 'mq' policy an alias for 'smq'
smq seems to be performing better than the old mq policy in all
situations, as well as using a quarter of the memory.

Make 'mq' an alias for 'smq' when choosing a cache policy.  The tunables
that were present for the old mq are faked, and have no effect.  mq
should be considered deprecated now.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-03-10 17:12:08 -05:00
Sami Tolvanen 0cc37c2df4 dm verity: add ignore_zero_blocks feature
If ignore_zero_blocks is enabled dm-verity will return zeroes for blocks
matching a zero hash without validating the content.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-12-10 10:39:03 -05:00
Sami Tolvanen a739ff3f54 dm verity: add support for forward error correction
Add support for correcting corrupted blocks using Reed-Solomon.

This code uses RS(255, N) interleaved across data and hash
blocks. Each error-correcting block covers N bytes evenly
distributed across the combined total data, so that each byte is a
maximum distance away from the others. This makes it possible to
recover from several consecutive corrupted blocks with relatively
small space overhead.

In addition, using verity hashes to locate erasures nearly doubles
the effectiveness of error correction. Being able to detect
corrupted blocks also improves performance, because only corrupted
blocks need to corrected.

For a 2 GiB partition, RS(255, 253) (two parity bytes for each
253-byte block) can correct up to 16 MiB of consecutive corrupted
blocks if erasures can be located, and 8 MiB if they cannot, with
16 MiB space overhead.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-12-10 10:39:03 -05:00
Linus Torvalds e0700ce709 - Revert a dm-multipath change that caused a regression for unprivledged
users (e.g. kvm guests) that issued ioctls when a multipath device had
   no available paths.
 
 - Include Christoph's refactoring of DM's ioctl handling and add support
   for passing through persistent reservations with DM multipath.
 
 - All other changes are very simple cleanups.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJWOp04AAoJEMUj8QotnQNaFLsH/AhMEH/jI1ObOfy4J1Wy4rOx
 ujJT91uS/s0H3pc9cGKQYnuGpFkX6WWU4wMiabIyiTn4sAsoXaflfIGutivLiDJr
 HfecrMrGZgnP4ZlpPPB02BmlxFbcPW8yzAU4ma38xBgQ+Pu30RO/HkvX/2vKOppG
 qwPop/XsNxq3KXgFGM44ToytM6c/MPGluhuvOwbaacAO1HviMuen9qsVjk4kwcf3
 jGYTbEPHATxyu5/6oKDTkQTYhzdwg3B2qHCiKMGw3l1kXhaQLFcaOivOLV8Sf3xh
 bj1070pkGe9OpqaVzMnwDtJ8rnsBl/Nt4wj9oiQPxbX71GYZAmcMIYn9WEkcKFI=
 =AR2D
 -----END PGP SIGNATURE-----

Merge tag 'dm-4.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:
 "Smaller set of DM changes for this merge.  I've based these changes on
  Jens' for-4.4/reservations branch because the associated DM changes
  required it.

   - Revert a dm-multipath change that caused a regression for
     unprivledged users (e.g. kvm guests) that issued ioctls when a
     multipath device had no available paths.

   - Include Christoph's refactoring of DM's ioctl handling and add
     support for passing through persistent reservations with DM
     multipath.

   - All other changes are very simple cleanups"

* tag 'dm-4.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm switch: simplify conditional in alloc_region_table()
  dm delay: document that offsets are specified in sectors
  dm delay: capitalize the start of an delay_ctr() error message
  dm delay: Use DM_MAPIO macros instead of open-coded equivalents
  dm linear: remove redundant target name from error messages
  dm persistent data: eliminate unnecessary return values
  dm: eliminate unused "bioset" process for each bio-based DM device
  dm: convert ffs to __ffs
  dm: drop NULL test before kmem_cache_destroy() and mempool_destroy()
  dm: add support for passing through persistent reservations
  dm: refactor ioctl handling
  Revert "dm mpath: fix stalls when handling invalid ioctls"
  dm: initialize non-blk-mq queue data before queue is used
2015-11-04 21:19:53 -08:00
Tomohiro Kusumi f49e869a61 dm delay: document that offsets are specified in sectors
Only delay params are mentioned in delay.txt.
Mention offsets just like documents for linear and flakey do.

Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-10-31 19:06:05 -04:00
Mike Snitzer b0d3cc011e dm snapshot: add new persistent store option to support overflow
Commit 76c44f6d80 introduced the possibly for "Overflow" to be reported
by the snapshot device's status.  Older userspace (e.g. lvm2) does not
handle the "Overflow" status response.

Fix this incompatibility by requiring newer userspace code, that can
cope with "Overflow", request the persistent store with overflow support
by using "PO" (Persistent with Overflow) for the snapshot store type.

Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Fixes: 76c44f6d80 ("dm snapshot: don't invalidate on-disk image on snapshot write overflow")
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-10-09 16:57:03 -04:00
Heinz Mauelshagen f15f4d7200 dm raid: document RAID 4/5/6 discard support
For RAID 4/5/6 data integrity reasons 'discard_zeroes_data' must work
properly.

Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-08-31 15:05:31 -04:00
Mikulas Patocka bd49784fd1 dm stats: report precise_timestamps and histogram in @stats_list output
If the user selected the precise_timestamps or histogram options, report
it in the @stats_list message output.

If the user didn't select these options, no extra tokens are reported,
thus it is backward compatible with old software that doesn't know about
precise timestamps and histogram.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 4.2
2015-08-18 17:20:03 -04:00
Mike Snitzer 255eac2005 dm cache: display 'needs_check' in status if it is set
There is currently no way to see that the needs_check flag has been set
in the metadata.  Display 'needs_check' in the cache status if it is set
in the cache metadata.

Also, update cache documentation.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-07-16 10:23:50 -04:00
Mike Snitzer e4c78e210d dm thin: display 'needs_check' in status if it is set
There is currently no way to see that the needs_check flag has been set
in the metadata.  Display 'needs_check' in the thin-pool status if it is
set in the thinp metadata.

Also, update thinp documentation.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-07-16 10:23:50 -04:00
Mikulas Patocka dfcfac3e4c dm stats: collect and report histogram of IO latencies
Add an option to dm statistics to collect and report a histogram of
IO latencies.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-06-17 12:40:40 -04:00
Mikulas Patocka c96aec344d dm stats: support precise timestamps
Make it possible to use precise timestamps with nanosecond granularity
in dm statistics.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-06-17 12:40:40 -04:00
Mike Snitzer bccab6a01a dm cache: switch the "default" cache replacement policy from mq to smq
The Stochastic multiqueue (SMQ) policy (vs MQ) offers the promise of
less memory utilization, improved performance and increased adaptability
in the face of changing workloads.  SMQ also does not have any
cumbersome tuning knobs.

Users may switch from "mq" to "smq" simply by appropriately reloading a
DM table that is using the cache target.  Doing so will cause all of the
mq policy's hints to be dropped.  Also, performance of the cache may
degrade slightly until smq recalculates the origin device's hotspots
that should be cached.

In the future the "mq" policy will just silently make use of "smq" and
the mq code will be removed.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
2015-06-17 12:40:38 -04:00
Joe Thornber 028ae9f76f dm cache: add fail io mode and needs_check flag
If a cache metadata operation fails (e.g. transaction commit) the
cache's metadata device will abort the current transaction, set a new
needs_check flag, and the cache will transition to "read-only" mode.  If
aborting the transaction or setting the needs_check flag fails the cache
will transition to "fail-io" mode.

Once needs_check is set the cache device will not be allowed to
activate.  Activation requires write access to metadata.  Future work is
needed to add proper support for running the cache in read-only mode.

Once in fail-io mode the cache will report a status of "Fail".

Also, add commit() wrapper that will disallow commits if in read_only or
fail mode.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-06-11 17:13:00 -04:00
Heinz Mauelshagen 0cf4503174 dm raid: add support for the MD RAID0 personality
Add dm-raid access to the MD RAID0 personality to enable single zone
striping.

The following changes enable that access:
- add type definition to raid_types array
- make bitmap creation conditonal in super_validate(), because
  bitmaps are not allowed in raid0
- set rdev->sectors to the data image size in super_validate()
  to allow the raid0 personality to calculate the MD array
  size properly
- use mdddev(un)lock() functions instead of direct mutex_(un)lock()
  (wrapped in here because it's a trivial change)
- enhance raid_status() to always report full sync for raid0
  so that userspace checks for 100% sync will succeed and allow
  for resize (and takeover/reshape once added in future paches)
- enhance raid_resume() to not load bitmap in case of raid0
- add merge function to avoid data corruption (seen with readahead)
  that resulted from bio payloads that grew too large.  This problem
  did not occur with the other raid levels because it either did not
  apply without striping (raid1) or was avoided via stripe caching.
- raise version to 1.7.0 because of the raid0 API change

Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Reviewed-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-05-29 14:19:00 -04:00
Heinz Mauelshagen 0f4106b32f dm raid: fixup documentation for discard support
Remove comment above parse_raid_params() that claims
"devices_handle_discard_safely" is a table line argument when it is
actually is a module parameter.

Also, backfill dm-raid target version 1.6.0 documentation.

Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Reviewed-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-05-29 14:18:59 -04:00
Milan Broz e44f23b32d dm crypt: update URLs to new cryptsetup project page
Cryptsetup home page moved to GitLab.
Also remove link to abandonded Truecrypt page.

Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-04-15 12:10:24 -04:00
Josef Bacik 0e9cebe724 dm: add log writes target
Introduce a new target that is meant for file system developers to test file
system integrity at particular points in the life of a file system.  We capture
all write requests and associated data and log them to a separate device
for later replay.  There is a userspace utility to do this replay.  The
idea behind this is to give file system developers a tool to verify that
the file system is always consistent.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Zach Brown <zab@zabbo.net>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-04-15 12:10:24 -04:00
Sami Tolvanen 65ff5b7ddf dm verity: add error handling modes for corrupted blocks
Add device specific modes to dm-verity to specify how corrupted
blocks should be handled.  The following modes are defined:

  - DM_VERITY_MODE_EIO is the default behavior, where reading a
    corrupted block results in -EIO.

  - DM_VERITY_MODE_LOGGING only logs corrupted blocks, but does
    not block the read.

  - DM_VERITY_MODE_RESTART calls kernel_restart when a corrupted
    block is discovered.

In addition, each mode sends a uevent to notify userspace of
corruption and to allow further recovery actions.

The driver defaults to previous behavior (DM_VERITY_MODE_EIO)
and other modes can be enabled with an additional parameter to
the verity table.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-04-15 12:10:22 -04:00
Mike Snitzer 0e0e32c16c dm thin: remove stale 'trim' message documentation
The 'trim' message wasn't ever implemented.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-04-15 12:10:22 -04:00
Mike Snitzer e73f6e8a0d dm switch: fix Documentation to use plain text
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-03-31 12:03:49 -04:00
Mikulas Patocka 0f5d8e6ee7 dm crypt: add 'submit_from_crypt_cpus' option
Make it possible to disable offloading writes by setting the optional
'submit_from_crypt_cpus' table argument.

There are some situations where offloading write bios from the
encryption threads to a single thread degrades performance
significantly.

The default is to offload write bios to the same thread because it
benefits CFQ to have writes submitted using the same IO context.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-02-16 11:11:15 -05:00