Commit Graph

24326 Commits

Author SHA1 Message Date
Prabhakar Lad b25db38392 media: platform: davinci: drop VPFE_CMD_S_CCDC_RAW_PARAMS
drop VPFE_CMD_S_CCDC_RAW_PARAMS ioctl from dm355/dm644x following reasons:

- This ioctl was never in public api and was only defined in kernel header.
- The function set_params constantly mixes up pointers and phys_addr_t
  numbers.
- This is part of a 'VPFE_CMD_S_CCDC_RAW_PARAMS' ioctl command that is
  described as an 'experimental ioctl that will change in future kernels'.
- The code to allocate the table never gets called after we copy_from_user
  the user input over the kernel settings, and then compare them
  for inequality.
- We then go on to use an address provided by user space as both the
  __user pointer for input and pass it through phys_to_virt to come up
  with a kernel pointer to copy the data to. This looks like a trivially
  exploitable root hole.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26 06:14:33 -04:00
Prabhakar Lad da05d52d2f media: platform: davinci: return -EINVAL for VPFE_CMD_S_CCDC_RAW_PARAMS ioctl
this patch makes sure VPFE_CMD_S_CCDC_RAW_PARAMS ioctl no longer works
for vpfe_capture driver with a minimal patch suitable for backporting.

- This ioctl was never in public api and was only defined in kernel header.
- The function set_params constantly mixes up pointers and phys_addr_t
  numbers.
- This is part of a 'VPFE_CMD_S_CCDC_RAW_PARAMS' ioctl command that is
  described as an 'experimental ioctl that will change in future kernels'.
- The code to allocate the table never gets called after we copy_from_user
  the user input over the kernel settings, and then compare them
  for inequality.
- We then go on to use an address provided by user space as both the
  __user pointer for input and pass it through phys_to_virt to come up
  with a kernel pointer to copy the data to. This looks like a trivially
  exploitable root hole.

Due to these reasons we make sure this ioctl now returns -EINVAL and backport
this patch as far as possible.

Fixes: 5f15fbb68f ("V4L/DVB (12251): v4l: dm644x ccdc module for vpfe capture driver")

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Cc: <stable@vger.kernel.org>      # for v3.7 and up
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26 06:14:33 -04:00
Stanimir Varbanov 377a22d3ca media: venus: don't abuse dma_alloc for non-DMA allocations
In venus_boot(), we pass a pointer to a phys_addr_t
into dmam_alloc_coherent, which the compiler warns about:

platform/qcom/venus/firmware.c: In function 'venus_boot':
platform/qcom/venus/firmware.c:63:49: error: passing argument 3 of 'dmam_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types]

To avoid the error refactor venus_boot function by discard
dma_alloc_coherent invocation because we don't want to map the
memory for the device.  Something more, the usage of
DMA mapping API is actually wrong and the current
implementation relies on several bugs in DMA mapping code.
When these bugs are fixed that will break firmware loading,
so fix this now to avoid future troubles.

The meaning of venus_boot is to copy the content of the
firmware buffer into reserved (and memblock removed)
block of memory and pass that physical address to the
trusted zone for authentication and mapping through iommu
form the secure world. After iommu mapping is done the iova
is passed as ane entry point to the remote processor.

After this change memory-region property is parsed manually
and the physical address is memremap to CPU, call mdt_load to
load firmware segments into proper places and unmap
reserved memory.

Fixes: af2c3834c8 ("[media] media: venus: adding core part and helper functions")

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26 06:14:32 -04:00
Rob Clark 3e7caae5f2 media: venus: hfi: fix error handling in hfi_sys_init_done()
Not entirely sure what triggers it, but with venus build as kernel
module and in initrd, we hit this crash:

  Unable to handle kernel paging request at virtual address ffff80003c039000
  pgd = ffff00000a14f000
  [ffff80003c039000] *pgd=00000000bd9f7003, *pud=00000000bd9f6003, *pmd=00000000bd9f0003, *pte=0000000000000000
  Internal error: Oops: 96000007 [#1] SMP
  Modules linked in: qcom_wcnss_pil(E+) crc32_ce(E) qcom_common(E) venus_core(E+) remoteproc(E) snd_soc_msm8916_digital(E) virtio_ring(E) cdc_ether(E) snd_soc_lpass_apq8016(E) snd_soc_lpass_cpu(E) snd_soc_apq8016_sbc(E) snd_soc_lpass_platform(E) v4l2_mem2mem(E) virtio(E) snd_soc_core(E) ac97_bus(E) snd_pcm_dmaengine(E) snd_seq(E) leds_gpio(E) videobuf2_v4l2(E) videobuf2_core(E) snd_seq_device(E) snd_pcm(E) videodev(E) media(E) nvmem_qfprom(E) msm(E) snd_timer(E) snd(E) soundcore(E) spi_qup(E) mdt_loader(E) qcom_tsens(E) qcom_spmi_temp_alarm(E) nvmem_core(E) msm_rng(E) uas(E) usb_storage(E) dm9601(E) usbnet(E) mii(E) mmc_block(E) adv7511(E) drm_kms_helper(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) fb_sys_fops(E) qcom_spmi_vadc(E) qcom_vadc_common(PE) industrialio(E) pinctrl_spmi_mpp(E)
   pinctrl_spmi_gpio(E) rtc_pm8xxx(E) clk_smd_rpm(E) sdhci_msm(E) sdhci_pltfm(E) qcom_smd_regulator(E) drm(E) smd_rpm(E) qcom_spmi_pmic(E) regmap_spmi(E) ci_hdrc_msm(E) ci_hdrc(E) usb3503(E) extcon_usb_gpio(E) phy_msm_usb(E) udc_core(E) qcom_hwspinlock(E) extcon_core(E) ehci_msm(E) i2c_qup(E) sdhci(E) mmc_core(E) spmi_pmic_arb(E) spmi(E) qcom_smd(E) smsm(E) rpmsg_core(E) smp2p(E) smem(E) hwspinlock_core(E) gpio_keys(E)
  CPU: 2 PID: 551 Comm: irq/150-venus Tainted: P            E   4.12.0+ #1625
  Hardware name: qualcomm dragonboard410c/dragonboard410c, BIOS 2017.07-rc2-00144-ga97bdbdf72-dirty 07/08/2017
  task: ffff800037338000 task.stack: ffff800038e00000
  PC is at hfi_sys_init_done+0x64/0x140 [venus_core]
  LR is at hfi_process_msg_packet+0xcc/0x1e8 [venus_core]
  pc : [<ffff00000118b384>] lr : [<ffff00000118c11c>] pstate: 20400145
  sp : ffff800038e03c60
  x29: ffff800038e03c60 x28: 0000000000000000
  x27: 00000000000df018 x26: ffff00000118f4d0
  x25: 0000000000020003 x24: ffff80003a8d3010
  x23: ffff00000118f760 x22: ffff800037b40028
  x21: ffff8000382981f0 x20: ffff800037b40028
  x19: ffff80003c039000 x18: 0000000000000020
  x17: 0000000000000000 x16: ffff800037338000
  x15: ffffffffffffffff x14: 0000001000000014
  x13: 0000000100001007 x12: 0000000100000020
  x11: 0000100e00000000 x10: 0000000000000001
  x9 : 0000000200000000 x8 : 0000001400000001
  x7 : 0000000000001010 x6 : 0000000000000148
  x5 : 0000000000001009 x4 : ffff80003c039000
  x3 : 00000000cd770abb x2 : 0000000000000042
  x1 : 0000000000000788 x0 : 0000000000000002
  Process irq/150-venus (pid: 551, stack limit = 0xffff800038e00000)
  Call trace:
  [<ffff00000118b384>] hfi_sys_init_done+0x64/0x140 [venus_core]
  [<ffff00000118c11c>] hfi_process_msg_packet+0xcc/0x1e8 [venus_core]
  [<ffff00000118a2b4>] venus_isr_thread+0x1b4/0x208 [venus_core]
  [<ffff00000118e750>] hfi_isr_thread+0x28/0x38 [venus_core]
  [<ffff000008161550>] irq_thread_fn+0x30/0x70
  [<ffff0000081617fc>] irq_thread+0x14c/0x1c8
  [<ffff000008105e68>] kthread+0x138/0x140
  [<ffff000008083590>] ret_from_fork+0x10/0x40
  Code: 52820125 52820207 7a431820 54000249 (b9400263)
  ---[ end trace c963460f20a984b6 ]---

The problem is that in the error case, we've incremented the data ptr
but not decremented rem_bytes, and keep reading (presumably garbage)
until eventually we go beyond the end of the buffer.

Instead, on first error, we should probably just bail out.  Other
option is to increment read_bytes by sizeof(u32) before the switch,
rather than only accounting for the ptype header in the non-error
case.  Note that in this case it is HFI_ERR_SYS_INVALID_PARAMETER,
ie. an unrecognized/unsupported parameter, so interpreting the next
word as a property type would be bogus.  The other error cases are
due to truncated buffer, so there isn't likely to be anything valid
to interpret in the remainder of the buffer.  So just bailing seems
like a reasonable solution.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26 06:14:32 -04:00
Arnd Bergmann b8f9bdc151 media: venus: fix compile-test build on non-qcom ARM platform
If QCOM_MDT_LOADER is enabled, but ARCH_QCOM is not, we run into
a build error:

ERROR: "qcom_mdt_load" [drivers/media/platform/qcom/venus/venus-core.ko] undefined!
ERROR: "qcom_mdt_get_size" [drivers/media/platform/qcom/venus/venus-core.ko] undefined!

This changes the 'select' statement again, so we only try to enable
those symbols when the drivers will actually get built, and explicitly
test for QCOM_MDT_LOADER to be enabled before calling into it.

Fixes: 76724b30f2 ("[media] media: venus: enable building with COMPILE_TEST")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26 06:14:31 -04:00
Arnd Bergmann eb918f915f media: venus: mark PM functions as __maybe_unused
Without PM support, gcc warns about two unused functions:

platform/qcom/venus/core.c:146:13: error: 'venus_clks_disable' defined but not used [-Werror=unused-function]
platform/qcom/venus/core.c:126:12: error: 'venus_clks_enable' defined but not used [-Werror=unused-function]

The problem as usual are incorrect #ifdefs, so the easiest fix
is to do away with the #ifdef completely and mark the suspend/resume
handlers as __maybe_unused, which they are.

Fixes: af2c3834c8 ("[media] media: venus: adding core part and helper functions")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26 06:14:31 -04:00
Hans Verkuil fc1ff45a07 media: cec-notifier: small improvements
Allow calling cec_notifier_set_phys_addr and
cec_notifier_set_phys_addr_from_edid with a NULL notifier, in which
case these functions do nothing.

Add a cec_notifier_phys_addr_invalidate helper function (the notifier
equivalent of cec_phys_addr_invalidate).

These changes simplify drm CEC driver support.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26 05:46:44 -04:00
Hans Verkuil 9b7c0c476f media: pulse8-cec: persistent_config should be off by default
The persistent_config option is used to make the CEC settings persistent by using
the eeprom inside the device to store this information. This was on by default, which
caused confusion since this device now behaves differently from other CEC devices
which all come up unconfigured.

Another reason for doing this now is that I hope a more standard way of selecting
persistent configuration will be created in the future. And for that to work all
CEC drivers should behave the same and come up unconfigured by default.

None of the open source CEC applications are using this CEC framework at the moment
so change this behavior before it is too late.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org>      # for v4.10 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26 05:46:43 -04:00
Hans Verkuil bd34ca8758 media: cec: cec_transmit_attempt_done: ignore CEC_TX_STATUS_MAX_RETRIES
The switch in cec_transmit_attempt_done() should ignore the
CEC_TX_STATUS_MAX_RETRIES status bit.

Calling this function with e.g. CEC_TX_STATUS_NACK | CEC_TX_STATUS_MAX_RETRIES
is perfectly legal and should not trigger the WARN(1).

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26 05:46:43 -04:00
Sean Young 9f5039ba44 media: lirc: LIRC_GET_REC_RESOLUTION should return microseconds
Since commit e8f4818895 ("[media] lirc: advertise
LIRC_CAN_GET_REC_RESOLUTION and improve") lircd uses the ioctl
LIRC_GET_REC_RESOLUTION to determine the shortest pulse or space that
the hardware can detect. This breaks decoding in lirc because lircd
expects the answer in microseconds, but nanoseconds is returned.

Cc: <stable@vger.kernel.org> # v2.6.36+
Reported-by: Derek <user.vdr@gmail.com>
Tested-by: Derek <user.vdr@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26 05:46:42 -04:00
Javier Martinez Canillas bf183e0fed media: vimc: set id_table for platform drivers
The vimc platform drivers define a platform device ID table but these
are not set to the .id_table field in the platform driver structure.

So the platform device ID table is only used to fill the aliases in
the module but are not used for matching (works because the platform
subsystem fallbacks to the driver's name if no .id_table is set).

But this also means that the platform device ID table isn't used if
the driver is built-in, which leads to the following build warning:

This causes the following build warnings when the driver is built-in:

drivers/media/platform/vimc//vimc-capture.c:528:40: warning: ‘vimc_cap_driver_ids’ defined but not used [-Wunused-const-variable=]
 static const struct platform_device_id vimc_cap_driver_ids[] = {
                                        ^~~~~~~~~~~~~~~~~~~
drivers/media/platform/vimc//vimc-debayer.c:588:40: warning: ‘vimc_deb_driver_ids’ defined but not used [-Wunused-const-variable=]
 static const struct platform_device_id vimc_deb_driver_ids[] = {
                                        ^~~~~~~~~~~~~~~~~~~
drivers/media/platform/vimc//vimc-scaler.c:442:40: warning: ‘vimc_sca_driver_ids’ defined but not used [-Wunused-const-variable=]
 static const struct platform_device_id vimc_sca_driver_ids[] = {
                                        ^~~~~~~~~~~~~~~~~~~
drivers/media/platform/vimc//vimc-sensor.c:376:40: warning: ‘vimc_sen_driver_ids’ defined but not used [-Wunused-const-variable=]
 static const struct platform_device_id vimc_sen_driver_ids[] = {
                                        ^~~~~~~~~~~~~~~~~~~

Reported-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Suggested-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Helen Koike <helen.koike@collabora.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-26 05:46:25 -04:00
Mauro Carvalho Chehab 9a01968c75 media: davinci: variable 'common' set but not used
Get rid of those two warnings:
drivers/media/platform/davinci/vpif_capture.c: In function 'vpif_remove':
drivers/media/platform/davinci/vpif_capture.c:1722:21: warning: variable 'common' set but not used [-Wunused-but-set-variable]
  struct common_obj *common;
                     ^~~~~~
drivers/media/platform/davinci/vpif_display.c: In function 'vpif_remove':
drivers/media/platform/davinci/vpif_display.c:1342:21: warning: variable 'common' set but not used [-Wunused-but-set-variable]
  struct common_obj *common;
                     ^~~~~~

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-07-17 11:19:41 -03:00
Mauro Carvalho Chehab a3db9d60a1 Linux v4.13-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJZapWhAAoJEHm+PkMAQRiGKb0IAJM6b7SbWaw69Og7+qiFB+zZ
 xp29iXqbE9fPISC6a5BRQV1ONjeDM6opGixGHqGC8Hla6k2IYz25VDNoF8wd0MXN
 cz/Ih20vd3C5afxXGe5cTT8lsPAlV0mWXxForlu6j8jPeL62FPfq6RhEkw7AcrYL
 yfYy3k3qSdOrrvBdII0WAAUi46UfIs+we9BQgbsMbkHOiqV2K0MOrzKE84Xbgepq
 RAy2xg6P4b4+hTx8xTrYc1MXwpnqjRc0oJ08gdmiwW3AOOU7LxYFn7zDkLPWi9Rr
 g4x6r4YhBTGxT4wNvovLIiqd9QFs//dMCuPWYwEtTICG48umIqqq24beQ0mvCdg=
 =08Ic
 -----END PGP SIGNATURE-----

Merge tag 'v4.13-rc1' into patchwork

Linux v4.13-rc1

* tag 'v4.13-rc1': (11136 commits)
  Linux v4.13-rc1
  random: reorder READ_ONCE() in get_random_uXX
  random: suppress spammy warnings about unseeded randomness
  replace incorrect strscpy use in FORTIFY_SOURCE
  kmod: throttle kmod thread limit
  kmod: add test driver to stress test the module loader
  MAINTAINERS: give kmod some maintainer love
  xtensa: use generic fb.h
  fault-inject: add /proc/<pid>/fail-nth
  fault-inject: simplify access check for fail-nth
  fault-inject: make fail-nth read/write interface symmetric
  fault-inject: parse as natural 1-based value for fail-nth write interface
  fault-inject: automatically detect the number base for fail-nth write interface
  kernel/watchdog.c: use better pr_fmt prefix
  MAINTAINERS: move the befs tree to kernel.org
  lib/atomic64_test.c: add a test that atomic64_inc_not_zero() returns an int
  mm: fix overflow check in expand_upwards()
  ubifs: Set double hash cookie also for RENAME_EXCHANGE
  ubifs: Massage assert in ubifs_xattr_set() wrt. init_xattrs
  ubifs: Don't leak kernel memory to the MTD
  ...
2017-07-17 11:17:36 -03:00
Linus Torvalds af3c8d9850 main drm pull for v4.13
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZYseIAAoJEAx081l5xIa+85kP/0zKzKKVzZXSXG2TAGb5jNfk
 Ex+TELG8tWk9KBxA7lEE5c0WEsnP79cNoXZLQu8wlUzO8+kwQK5Bz0zgNUkpSuo1
 RthwdsxBQX1++UxB+HoSG+dOa7hkKVqlgQR3z9qyhsBXzetkJV0DoYcpMV0A1EWd
 6Jzt+AvCShVkcW+21LqHPlc5EIVewrDMoA3oU6aYCLhyAOUTVvvQB2ML8YApH7TM
 JrSrzCFHTrQEBbGUrZQhzR0sZzZzk9byntb/I/mdVbHeCyIHiL8sC4PfWSOyyazm
 GkPnA8G3aFAY9haBRz9jG/VBr1yVb0mCBjkWQ1lGfIAOCDDSc+d7PDXdG+i4AewK
 jZheXlrDIdGgmJLy4W3rdEqJvdf7UQHZOs8594OL19l4+FxCTrol1JSHSMeavCvr
 8bUNil9Jb/ONU/wmp+q55U0k4TCTyerUA7gKnuaJAwBvd4n78/PKmQnbrWinDyJc
 GQXp6zESk9bKt5DXSnVZuVf4POTzpuAsQkkfX1V2y145EHTQYfS3jLENWqEjyZUy
 QtKCHZvRkJfGaFU4Pr+vBo9Iu1GlA5OiOv08QadldTT4OxUI0T6yaLDobHCQfKPE
 sc3wCuCM+/dAnqoKDcGC4hAmF8zDdO0kw65P2m7uC6T9Jm1G35CioKbzo+fzUhuL
 fg5TBpbp2Wwe2oPA5iBm
 =2S5N
 -----END PGP SIGNATURE-----

Merge tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "This is the main pull request for the drm, I think I've got one later
  driver pull for mediatek SoC driver, I'm undecided on if it needs to
  go to you yet.

  Otherwise summary below:

  Core drm:
   - Atomic add driver private objects
   - Deprecate preclose hook in modern drivers
   - MST bandwidth tracking
   - Use kvmalloc in more places
   - Add mode_valid hook for crtc/encoder/bridge
   - Reduce sync_file construction time
   - Documentation updates
   - New DRM synchronisation object support

  New drivers:
   - pl111 - pl111 CLCD display controller

  Panel:
   - Innolux P079ZCA panel driver
   - Add NL12880B20-05, NL192108AC18-02D, P320HVN03 panels
   - panel-samsung-s6e3ha2: Add s6e3hf2 panel support

  i915:
   - SKL+ watermark fixes
   - G4x/G33 reset improvements
   - DP AUX backlight improvements
   - Buffer based GuC/host communication
   - New getparam for (sub)slice infomation
   - Cannonlake and Coffeelake initial patches
   - Execbuf optimisations

  radeon/amdgpu:
   - Lots of Vega10 bug fixes
   - Preliminary raven support
   - KIQ support for compute rings
   - MEC queue management rework
   - DCE6 Audio support
   - SR-IOV improvements
   - Better radeon/amdgpu selection support

  nouveau:
   - HDMI stereoscopic support
   - Display code rework for >= GM20x GPUs

  msm:
   - GEM rework for fine-grained locking
   - Per-process pagetable work
   - HDMI fixes for Snapdragon 820.

  vc4:
   - Remove 256MB CMA limit from vc4
   - Add out-fence support
   - Add support for cygnus
   - Get/set tiling ioctls support
   - Add T-format tiling support for scanout

  zte:
   - add VGA support.

  etnaviv:
   - Thermal throttle support for newer GPUs
   - Restore userspace buffer cache performance
   - dma-buf sync fix

  stm:
   - add stm32f429 display support

  exynos:
   - Rework vblank handling
   - Fixup sw-trigger code

  sun4i:
   - V3s display engine support
   - HDMI support for older SoCs
   - Preliminary work on dual-pipeline SoCs.

  rcar-du:
   - VSP work

  imx-drm:
   - Remove counter load enable from PRE
   - Double read/write reduction flag support

  tegra:
   - Documentation for the host1x and drm driver.
   - Lots of staging ioctl fixes due to grate project work.

  omapdrm:
   - dma-buf fence support
   - TILER rotation fixes"

* tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linux: (1270 commits)
  drm: Remove unused drm_file parameter to drm_syncobj_replace_fence()
  drm/amd/powerplay: fix bug fail to remove sysfs when rmmod amdgpu.
  amdgpu: Set cik/si_support to 1 by default if radeon isn't built
  drm/amdgpu/gfx9: fix driver reload with KIQ
  drm/amdgpu/gfx8: fix driver reload with KIQ
  drm/amdgpu: Don't call amd_powerplay_destroy() if we don't have powerplay
  drm/ttm: Fix use-after-free in ttm_bo_clean_mm
  drm/amd/amdgpu: move get memory type function from early init to sw init
  drm/amdgpu/cgs: always set reference clock in mode_info
  drm/amdgpu: fix vblank_time when displays are off
  drm/amd/powerplay: power value format change for Vega10
  drm/amdgpu/gfx9: support the amdgpu.disable_cu option
  drm/amd/powerplay: change PPSMC_MSG_GetCurrPkgPwr for Vega10
  drm/amdgpu: Make amdgpu_cs_parser_init static (v2)
  drm/amdgpu/cs: fix a typo in a comment
  drm/amdgpu: Fix the exported always on CU bitmap
  drm/amdgpu/gfx9: gfx_v9_0_enable_gfx_static_mg_power_gating() can be static
  drm/amdgpu/psp: upper_32_bits/lower_32_bits for address setup
  drm/amd/powerplay/cz: print message if smc message fails
  drm/amdgpu: fix typo in amdgpu_debugfs_test_ib_init
  ...
2017-07-09 18:48:37 -07:00
Linus Torvalds 0b49ce5a40 media updates for v4.13-rc1
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZXN2xAAoJEAhfPr2O5OEV9jgP/02n4XamK8Y4wZdY7FjyAg66
 IMYoz9J6VUWkKRVfGmtifmR5PWBW4XE4t6G3ksVnlMUP4XunEXec2gLmFkVsWSDz
 gpsK8C1E3RskzeY7dRqbIldoM+oiPYYcMNMQl+WpFs7JZyjlANEbkUSPZvjcUIlP
 s6U0bnBoFU35q0zoBcamvyuguIxjVceVYfpgXKHYYhPunzcvlJe4wQE1gOsMN1Pc
 /ncr3KFz5H6WsdcUGXAz/0z0tj6pPUWiUFQwAo0TaefON22tPpdn6J/2srtfA0Xc
 Vjlkh5DTT96dcTPQgGsYMuMaeB209I4dYtn3aBj/8UCBUjfAo3u9j9mHp0fReT8D
 CVsQQsAxxj+bHhXlRnCJL7w1X6kFnXnsWD3/EQU4r6zC6adj/7tNFqlkh2d8lL/k
 QMIUmhHe5bln/aQI52hDKV43AgujlrdCFxmMu9fblc8slMSyfOk6fc/2AuTLTXXX
 R+j2rp6HRVetlK+6IkmXcFfs3LCgSiLp9qXxYgKrNh1wbqBFb+0yXPnpf3N6pTRH
 AGSEvGWD5XUVEIuRq10A5XEEdHdgqLBcovEiu7nqoPKNfVVSt9kXnHqPUjlvqw/7
 kIFO31Ah/q0XGhyTZLwiOXL34vBxy6VRt8afS+eZ6hhjmxZ97tHJNvnu5mDcVxzF
 AyMrURPJiEhR0xfkIudo
 =RtxO
 -----END PGP SIGNATURE-----

Merge tag 'media/v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - addition of fwnode support at V4L2 core

 - addition of a few more SDR formats

 - new imx driver to support i.MX6 cameras

 - new driver for Qualcon venus codecs

 - new I2C sensor drivers: dw9714, max2175, ov13858, ov5640

 - new CEC driver: stm32-cec

 - some improvements to DVB frontend documentation and a few fixups

 - several driver improvements and fixups

* tag 'media/v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (361 commits)
  [media] media: entity: Catch unbalanced media_pipeline_stop calls
  [media] media/uapi/v4l: clarify cropcap/crop/selection behavior
  [media] v4l2-ioctl/exynos: fix G/S_SELECTION's type handling
  [media] vimc: sen: Declare vimc_sen_video_ops as static
  [media] vimc: sca: Add scaler
  [media] vimc: deb: Add debayer filter
  [media] vimc: Subdevices as modules
  [media] vimc: cap: Support several image formats
  [media] vimc: sen: Support several image formats
  [media] vimc: common: Add vimc_colorimetry_clamp
  [media] vimc: common: Add vimc_link_validate
  [media] vimc: common: Add vimc_pipeline_s_stream helper
  [media] vimc: common: Add vimc_ent_sd_* helper
  [media] vimc: Move common code from the core
  [media] vimc: sen: Integrate the tpg on the sensor
  [media] media: i2c: ov772x: Force use of SCCB protocol
  [media] dvb uapi docs: enums are passed by value, not reference
  [media] dvb: don't use 'time_t' in event ioctl
  [media] media: venus: enable building with COMPILE_TEST
  [media] af9013: refactor power control
  ...
2017-07-06 11:15:19 -07:00
Linus Torvalds 920f2ecdf6 sound updates for 4.13-rc1
This development cycle resulted in a fair amount of changes in both
 core and driver sides.  The most significant change in ALSA core is
 about PCM.  Also the support of of-graph card and the new DAPM widget
 for DSP are noteworthy changes in ASoC core.  And there're lots of
 small changes splat over the tree, as you can see in diffstat.
 
 Below are a few highlights:
 
 ALSA core:
 - Removal of set_fs() hackery from PCM core stuff, and the code
   reorganization / optimization thereafter
 - Improved support of PCM ack ops, and a new ABI for improved
   control/status mmap handling
 - Lots of constifications in various codes
 
 ASoC core:
 - The support of of-graph card, which may work as a better generic
   device for a replacement of simple-card
 - New widget types intended mainly for use with DSPs
 
 ASoC drivers:
 - New drivers for Allwinner V3s SoCs
 - Ensonic ES8316 codec support
 - More Intel SKL and KBL works
 - More device support for Intel SST Atom (mostly for cheap tablets and
   2-in-1 devices)
 - Support for Rockchip PDM controllers
 - Support for STM32 I2S and S/PDIF controllers
 - Support for ZTE AUD96P22 codecs
 
 HD-audio:
 - Support of new Realtek codecs (ALC215/ALC285/ALC289), more quirks
   for HP and Dell machines
 - A few more fixes for i915 component binding
 
 Note that of-graph change may bring the conflicts with a later pull
 request of devicetree, as currently found in linux-next.
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCAAsFiEECxfAB4MH3rD5mfB6bDGAVD0pKaQFAllbtmMOHHRpd2FpQHN1
 c2UuZGUACgkQbDGAVD0pKaTMkhAAnqvRvh9nYBI1E2VGtJON/AFcsF4s6xdJd0ow
 Bn5Kq/07rGWxAi8Cy69LM930eQrZl+xR69I7LMkC54BxVNhvhXNef7E5GXPbRi+3
 l6dkBmkqvwmmHP5iiOxKtYSAnUfJitu1rmtAOVAjRh8rsWNeLuI8N8V/uilQBioi
 lRywdBjdylub00H1DL8cmZHbrBb4pYrL/LepTswZL3I/UZ225fMiIGFd8tXpQPwZ
 IKRZiuzrc3SykxSsL/aNeyxP+2qTYRtPfl/FGenKBBO2PJmGAb00yAdtQJRcD2eX
 Xf1alfvpNgpy/U6+C7dJgNWQvvr+lPCaFXuMukIDno/zg/xD1V1Ev/fnbVEINLve
 xMOnuJSGGaY6fu6eZ4Cck0VfZIj7UVA9x8zvBOKntIhq/VLfE7DDu3p9tiAZAVfH
 nMOLAhy+0kFyHSrv6zVWQj+cmjPwLvaW7fNWVljL5/MWuF5GJi05DUOfV/vk8BaO
 EnyVqe2ynzNLTsFpLHHy6XKgKtSTkPygxYSNuI7kSYAxD5qE6hXXKXTAqJ3LjDkO
 tGiFmxp/vHrlNvcyRjXc30th/9PPj/mRBcJ2KyjXPa63L5ZW86PiyIHKxJA4yogv
 y4z2ZlhIz90cZvpigFHtFqq1puVlDtKDbAaJ6AKrP8HEHUlMiPNApsSjWWBUcfzV
 DXzrlg0=
 =PUEh
 -----END PGP SIGNATURE-----

Merge tag 'sound-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "This development cycle resulted in a fair amount of changes in both
  core and driver sides. The most significant change in ALSA core is
  about PCM. Also the support of of-graph card and the new DAPM widget
  for DSP are noteworthy changes in ASoC core. And there're lots of
  small changes splat over the tree, as you can see in diffstat.

  Below are a few highlights:

  ALSA core:
   - Removal of set_fs() hackery from PCM core stuff, and the code
     reorganization / optimization thereafter
   - Improved support of PCM ack ops, and a new ABI for improved
     control/status mmap handling
   - Lots of constifications in various codes

  ASoC core:
   - The support of of-graph card, which may work as a better generic
     device for a replacement of simple-card
   - New widget types intended mainly for use with DSPs

  ASoC drivers:
   - New drivers for Allwinner V3s SoCs
   - Ensonic ES8316 codec support
   - More Intel SKL and KBL works
   - More device support for Intel SST Atom (mostly for cheap tablets
     and 2-in-1 devices)
   - Support for Rockchip PDM controllers
   - Support for STM32 I2S and S/PDIF controllers
   - Support for ZTE AUD96P22 codecs

  HD-audio:
   - Support of new Realtek codecs (ALC215/ALC285/ALC289), more quirks
     for HP and Dell machines
   - A few more fixes for i915 component binding"

* tag 'sound-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (418 commits)
  ALSA: hda - Fix unbalance of i915 module refcount
  ASoC: Intel: Skylake: Remove driver debugfs exit
  ASoC: Intel: Skylake: explicitly add the headers sst-dsp.h
  ALSA: hda/realtek - Remove GPIO_MASK
  ALSA: hda/realtek - Fix typo of pincfg for Dell quirk
  ALSA: pcm: add a documentation for tracepoints
  ALSA: atmel: ac97c: fix error return code in atmel_ac97c_probe()
  ALSA: x86: fix error return code in hdmi_lpe_audio_probe()
  ASoC: Intel: Skylake: Add support to read firmware registers
  ASoC: Intel: Skylake: Add sram address to sst_addr structure
  ASoC: Intel: Skylake: Debugfs facility to dump module config
  ASoC: Intel: Skylake: Add debugfs support
  ASoC: fix semicolon.cocci warnings
  ASoC: rt5645: Add quirk override by module option
  ASoC: rsnd: make arrays path and cmd_case static const
  ASoC: audio-graph-card: add widgets and routing for external amplifier support
  ASoC: audio-graph-card: update bindings for amplifier support
  ASoC: rt5665: calibration should be done before jack detection
  ASoC: rsnd: constify dev_pm_ops structures.
  ASoC: nau8825: change crosstalk-bypass property to bool type
  ...
2017-07-06 10:56:51 -07:00
Takashi Iwai 818a23e388 ASoC: Updates for v4.13
The big news with this release is the of-graph card, this provides a
 replacement for simple-card that is much more flexibile and scalable,
 allowing many more systems to use a generic sound card than was possible
 before:
 
  - The of-graph card, finally merged after a long and dedicated effort
    by Morimoto-san.
  - New widget types intended mainly for use with DSPs.
  - New drivers for Allwinner V3s SoCs, Ensonic ES8316, several classes
    of x86 machine, Rockchip PDM controllers, STM32 I2S and S/PDIF
    controllers and ZTE AUD96P22 CODECs.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAllaa7wTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0MhRB/0cIuUi/SmMSGz7cNKdDDArdpxHUV0U
 dJb6qqhXCKeDQcx/34b1m+BnZpeT9au4Nt8HxOlLRbumcnuesYqfeBeZvuJhsC4I
 q3e8e+idQlOp3+WM+snUXhWM4P/UsA9H4BaV1jvYSQW/C9WhfuLxsOraRiebLH7u
 WJkmfeVjpzHHWzfDtpWJLHVroRLLMbOaz0e0Pw8/R1dfof0u27zKknqHOUcwRg0N
 4+IWvKn3p59VE6eM6QUmruMZZCCfn2Hv5RygWf3LaHVlhA28BZi0dyMMSSSzVG6o
 Im1Wm5z0dmmTfQKdNDU3PPBEKG6amTqF+2uuXOsq1I7vuiT+akHZbgWW
 =F5BP
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v4.13

The big news with this release is the of-graph card, this provides a
replacement for simple-card that is much more flexibile and scalable,
allowing many more systems to use a generic sound card than was possible
before:

 - The of-graph card, finally merged after a long and dedicated effort
   by Morimoto-san.
 - New widget types intended mainly for use with DSPs.
 - New drivers for Allwinner V3s SoCs, Ensonic ES8316, several classes
   of x86 machine, Rockchip PDM controllers, STM32 I2S and S/PDIF
   controllers and ZTE AUD96P22 CODECs.
2017-07-03 19:51:42 +02:00
Dave Airlie 6d61e70ccc Linux 4.12-rc7
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJZUGOmAAoJEHm+PkMAQRiGhX8H/3fIhingPD01MBf98U0xGrJo
 yIXmhu6nFs7TM0lDVDcHsKgqLQIT69ll7PrSZrMkc1RGUIPINoCuJVuJqDre0kfB
 of5TX2KegqSx8h1vOWjGBCBjdYfPGyMdf9icf6KsGc/SlIdhN6WA99kglAjJA0Ve
 qPTNagF0ntUNg1lsXffxyfcHqFpyqw/Z/C4ie/byFsn9iJ1VG9mNlTWSud09vhuM
 3tvHzTUVAIWWuRrrgrvgqQpnwL+q5BfSDsXScMjBau0EK3RGGqG8EN6Kbkfa7VQ6
 aBoeboQjUijSJnVwvySdQ11MChTIOwZdfrNPra/1HD3WJNsSu4BIRt5JcAKcOhc=
 =qmSg
 -----END PGP SIGNATURE-----

Backmerge tag 'v4.12-rc7' into drm-next

Linux 4.12-rc7

Needed at least rc6 for drm-misc-next-fixes, may as well go to rc7
2017-06-27 08:28:30 +10:00
Ralph Metzler dd3c5d0086 media: staging: cxd2099: Fixed buffer mode
The buffer mode was already implemented in this driver, but it did not work
as expected. This has been fixed now, but it is still deactivated and can
be activated by removing a comment at the begin of the file.

Original code change by Ralph Metzler, modified by Jasmin Jessich and
Daniel Scheller to match Kernel code style.

Signed-off-by: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Jasmin Jessich <jasmin@anw.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-26 08:17:49 -03:00
Ralph Metzler f894165cb5 media: dvb_ca_en50221: Add block read/write functions
Some lower level drivers may work better when sending blocks of data
instead byte per byte. For this we need new function pointers in the
dvb_ca_en50221 protocol structure (read_data, write_data) and the protocol
needs to execute them, if they are defined.
Block data transmission is done in all states except LINKINIT.

Original code change by Ralph Metzler, modified by Jasmin Jessich and
Daniel Scheller to match Kernel code style.

Signed-off-by: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Jasmin Jessich <jasmin@anw.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-26 08:15:32 -03:00
Ralph Metzler 5dbddc99ec media: dvb_ca_en50221: Increase timeout for link init
Some CAMs do a really slow initialization, which requires a longer timeout
for the first response.

Original code change by Ralph Metzler, modified by Jasmin Jessich to match
Kernel code style.

Signed-off-by: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: Jasmin Jessich <jasmin@anw.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-26 08:15:04 -03:00
Ralph Metzler cb61488a2f media: dvb_ca_en50221: State UNINITIALISED instead of INVALID
In case of a linkinit failure change to state UNINITIALISED to re-init
the CAM.

Original code change by Ralph Metzler, modified by Jasmin Jessich to match
Kernel code style.

Signed-off-by: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: Jasmin Jessich <jasmin@anw.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-26 08:13:30 -03:00
Mauro Carvalho Chehab 430e29d9c0 media: dvb-frontends/stv0367: Improve DVB-C/T frontend status
The stv0367 driver provide a lot of status on its state machine.
Change the logic to provide more information about frontend locking
status. Also, while any detailed status isn't available, provide a more
complete FE_STATUS for DVB-T.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
2017-06-25 10:48:45 -03:00
Daniel Scheller 006fe8ee88 media: dvb-frontends/stv0367: DVB-C signal strength statistics
Provide QAM/DVB-C signal strength in decibel scale. Values returned from
stv0367cab_get_rf_lvl() are good but need to be multiplied as they're in
1dBm precision.

Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-25 09:10:44 -03:00
Daniel Scheller 87b4671074 media: dvb-frontends/stv0367: update UCB readout condition logic
Since the other statistics are read when fe_status conditions are TRUE,
change the ucblocks readout logic to match this aswell.

Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-25 09:10:06 -03:00
Mauro Carvalho Chehab f5a1ba833d media: stv0367: prevent division by zero
While there's a test at the SNR calculus to avoid division by
zero, it will still follow the path that would do the division.
So, add a missing break there.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-25 09:07:45 -03:00
Daniel Scheller d394ad12c2 media: dvb-frontends/stv0367: SNR DVBv5 statistics for DVB-C and T
Add signal-to-noise-ratio as provided by the demodulator in decibel scale.
QAM/DVB-C needs some intlog calculation to have usable dB values, OFDM/
DVB-T values from the demod look alright already and are provided as-is.

Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-25 09:06:32 -03:00
Daniel Scheller 8982735f8d media: dvb-frontends/cxd2841er: require STATE_ACTIVE_* for agc readout
When the demod driver puts the demod into sleep or shutdown state and it's
status is then polled e.g. via "dvb-fe-tool -m", i2c errors are printed
to the kernel log. If the last delsys was DVB-T/T2:

  cxd2841er: i2c wr failed=-5 addr=6c reg=00 len=1
  cxd2841er: i2c rd failed=-5 addr=6c reg=26

and if it was DVB-C:

  cxd2841er: i2c wr failed=-5 addr=6c reg=00 len=1
  cxd2841er: i2c rd failed=-5 addr=6c reg=49

This happens when read_status unconditionally calls into the
read_signal_strength() function which triggers the read_agc_gain_*()
functions, where these registered are polled.

This isn't a critical thing since when the demod is active again, no more
such errors are logged, however this might make users suspecting defects.

Fix this by requiring STATE_ACTIVE_* in priv->state. If it isn't in any
active state, additionally set the strength scale to NOT_AVAILABLE.

Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-25 09:05:26 -03:00
Daniel Scheller 456698e93d media: ddbridge: dev_* logging fixup
Fixup

  commit d52786ddd2 ("media: ddbridge: make (ddb)readl in while-loops fail-safe")

after/wrt

  commit 11e358bf37 ("media: ddbridge: use dev_* macros in favor of printk")

Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-25 09:04:51 -03:00
Gustavo A. R. Silva b3d930aaf7 media: i2c: tvp5150: remove useless variable assignment in tvp5150_set_vbi()
Value assigned to variable _type_ at line 678 is overwritten at line 688
before it can be used. This makes such variable assignment useless.

Remove this variable assignment and fix some coding style issues.

Addresses-Coverity-ID: 1226968

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 19:04:46 -03:00
Gustavo A. R. Silva d83bc7b644 media: dvb-usb-v2: lmedm04: remove unnecessary variable in lme2510_stream_restart()
Remove unnecessary variable _ret_ and refactor the code.

Addresses-Coverity-ID: 1226934

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 18:46:05 -03:00
Daniel Scheller b138afda3c media: dvb-frontends/stv0367: split SNR determination into functions
The read_snr() functions currently do some magic to return relative scale
values when called. Split out register readouts into separate functions
so the functionality can be reused in some other way.

Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 17:42:47 -03:00
Daniel Scheller 4043eb2325 media: dvb-frontends/stv0367: initial DDB DVBv5 stats, implement ucblocks
This adds the basics to stv0367ddb_read_status() to be able to properly
provide signal statistics in DVBv5 format. Also adds UCB readout and
provides those values. Also, don't return -EINVAL in ddb_read_status()
if active_demod_state indicates no delivery system.

Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 17:42:18 -03:00
Daniel Scheller e1bdf02488 media: dvb-frontends/lnbh25: improve kernellog output
Use dev_dbg() in conjunction with the %*ph format macro to print the vmon
status debug, thus hiding continuous hexdumping from default log levels.
Also, change the attach success log line from error to info severity.

Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Acked-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 17:05:19 -03:00
Binoy Jayan bd7a85d363 media: ngene: Replace semaphore i2c_switch_mutex with mutex
The semaphore 'i2c_switch_mutex' is used as a simple mutex, so
it should be written as one. Semaphores are going away in the future.

Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 16:42:34 -03:00
Binoy Jayan 90979f0455 media: ngene: Replace semaphore stream_mutex with mutex
The semaphore 'stream_mutex' is used as a simple mutex, so
it should be written as one. Also moving the mutex_[lock/unlock]
to the caller as it is anyway locked at the beginning of the
callee thus avoiding repetition.

Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 16:42:00 -03:00
Binoy Jayan 1439cdb031 media: ngene: Replace semaphore cmd_mutex with mutex
The semaphore 'cmd_mutex' is used as a simple mutex, so
it should be written as one. Also, replace down with
mutex_destroy to ensure sane state when ngene_stop is
called.

Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 16:36:40 -03:00
Mauro Carvalho Chehab f7d84fa704 media: tw5864, fc0011: better handle WARN_ON()
As such macro will check if the expression is true, it may fall through, as
warned:

In file included from ./include/uapi/linux/stddef.h:1:0,
                 from ./include/linux/stddef.h:4,
                 from ./include/uapi/linux/posix_types.h:4,
                 from ./include/uapi/linux/types.h:13,
                 from ./include/linux/types.h:5,
                 from ./drivers/media/dvb-core/dvb_frontend.h:35,
                 from drivers/media/tuners/fc0011.h:4,
                 from drivers/media/tuners/fc0011.c:20:
drivers/media/tuners/fc0011.c: In function 'fc0011_set_params':
./include/linux/compiler.h:179:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
 # define unlikely(x) __builtin_expect(!!(x), 0)
                      ^~~~~~~~~~~~~~~~~~~~~~~~~~
./include/asm-generic/bug.h:109:2: note: in expansion of macro 'unlikely'
  unlikely(__ret_warn_on);     \
  ^~~~~~~~
drivers/media/tuners/fc0011.c:344:3: note: in expansion of macro 'WARN_ON'
   WARN_ON(1);
   ^~~~~~~
drivers/media/tuners/fc0011.c:345:2: note: here
  case 0:
  ^~~~
In file included from ./include/uapi/linux/stddef.h:1:0,
                 from ./include/linux/stddef.h:4,
                 from ./include/uapi/linux/posix_types.h:4,
                 from ./include/uapi/linux/types.h:13,
                 from ./include/linux/types.h:5,
                 from ./include/linux/list.h:4,
                 from ./include/linux/module.h:9,
                 from drivers/media/pci/tw5864/tw5864-video.c:17:
drivers/media/pci/tw5864/tw5864-video.c: In function 'tw5864_fmt_vid_cap':
./include/linux/compiler.h:179:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
 # define unlikely(x) __builtin_expect(!!(x), 0)
                      ^~~~~~~~~~~~~~~~~~~~~~~~~~
./include/asm-generic/bug.h:68:2: note: in expansion of macro 'unlikely'
  unlikely(__ret_warn_on);    \
  ^~~~~~~~
drivers/media/pci/tw5864/tw5864-video.c:547:3: note: in expansion of macro 'WARN_ON_ONCE'
   WARN_ON_ONCE(1);
   ^~~~~~~~~~~~
drivers/media/pci/tw5864/tw5864-video.c:548:2: note: here
  case STD_NTSC:
  ^~~~

On both cases, it means an error, so, let's return an error
code, to make gcc happy.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Michael Büsch <m@bues.ch>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 16:19:27 -03:00
Martin Kepplinger e1d00cddfb media: dvb-frontends: drx39xyj: remove obsolete sign extend macros
DRX_S9TOS16 and DRX_S24TODRXFREQ are simply not used. Furthermore,
sign_extend32() should be used for sign extension. (Also, the comment
describing DRX_S24TODRXFREQ was wrong). So remove these macros.

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 16:01:32 -03:00
Peter Ujfalusi 6a1560ecaa media: v4l: omap_vout: vrfb: Convert to dmaengine
The dmaengine driver for sDMA now have support for interleaved transfer.
This trasnfer type was open coded with the legacy omap-dma API, but now
we can move it to dmaengine.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 16:00:25 -03:00
Mauro Carvalho Chehab 1250a85b1b media: Replace initalized ->initialized
While committing a change on em28xx, I got a warning of a
typo there. So, fix it on em28xx and on two other media drivers
with the same typo.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 15:46:24 -03:00
Mauro Carvalho Chehab d6a643275a media: em28xx: add support for new of Terratec H6
There's a new version of Terratec H6 with uses USB ID
0ccd:10b2. This version is similar to the old one (with is
supported via the HTC entry), except that this one has the
eeprom on the second bus.

On this board, one side of this board is labeled with:
	dvbc v2.0
The other side with:
	94V-0, MO2, RK-4221 with huge digits: 1107

With those patches, the board is properly detected:

    em28xx 1-1.5:1.0: New device TERRATEC TERRATCE H5 MKII @ 480 Mbps (0ccd:10b2, interface 0, class 0)
    em28xx 1-1.5:1.0: Audio interface 0 found (Vendor Class)
    em28xx 1-1.5:1.0: Video interface 0 found: isoc
    em28xx 1-1.5:1.0: DVB interface 0 found: isoc
    em28xx 1-1.5:1.0: chip ID is em2884
    em28xx eeprom 00000000: 26 00 00 00 02 0b 0f e5 f5 64 01 60 09 e5 f5 64  &........d.`...d
    em28xx eeprom 00000010: 09 60 03 c2 c6 22 e5 f7 b4 03 13 e5 f6 b4 87 03  .`..."..........
    em28xx eeprom 00000020: 02 0a b9 e5 f6 b4 93 03 02 09 46 c2 c6 22 c2 c6  ..........F.."..
    em28xx eeprom 00000030: 22 00 60 00 ef 70 08 85 3d 82 85 3c 83 93 ff ef  ".`..p..=..<....
    em28xx eeprom 00000040: 60 19 85 3d 82 85 3c 83 e4 93 12 07 a3 12 0a fe  `..=..<.........
    em28xx eeprom 00000050: 05 3d e5 3d 70 02 05 3c 1f 80 e4 22 12 0b 06 02  .=.=p..<..."....
    em28xx eeprom 00000060: 07 e2 01 00 1a eb 67 95 cd 0c b2 10 f0 13 6b 03  ......g.......k.
    em28xx eeprom 00000070: 98 22 6a 1c 86 12 27 57 4e 16 29 00 60 00 00 00  ."j...'WN.).`...
    em28xx eeprom 00000080: 02 00 00 00 5e 00 13 00 f0 10 44 82 82 00 00 00  ....^.....D.....
    em28xx eeprom 00000090: 5b 81 c0 00 00 00 20 40 20 80 02 20 10 01 00 00  [..... @ .. ....
    em28xx eeprom 000000a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    em28xx eeprom 000000b0: c6 40 00 00 81 00 00 00 00 00 00 00 00 c4 00 00  .@..............
    em28xx eeprom 000000c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1c 03  ................
    em28xx eeprom 000000d0: 31 00 32 00 33 00 34 00 35 00 36 00 37 00 38 00  1.2.3.4.5.6.7.8.
    em28xx eeprom 000000e0: 39 00 41 00 42 00 43 00 44 00 12 03 54 00 45 00  9.A.B.C.D...T.E.
    em28xx eeprom 000000f0: 52 00 52 00 41 00 54 00 45 00 43 00 22 03 54 00  R.R.A.T.E.C.".T.
    em28xx 1-1.5:1.0: eeprom 000100: ... (skipped)
    em28xx 1-1.5:1.0: EEPROM ID = 26 00 00 00, EEPROM hash = 0xbcd5a8cf
    em28xx 1-1.5:1.0: EEPROM info:
    em28xx 1-1.5:1.0:	microcode start address = 0x0004, boot configuration = 0x00
    em28xx 1-1.5:1.0:	I2S audio, 5 sample rates
    em28xx 1-1.5:1.0:	500mA max power
    em28xx 1-1.5:1.0:	Table at offset 0x27, strings=0x2298, 0x1c6a, 0x1286
    em28xx 1-1.5:1.0: Identified as Terratec Cinergy H6 rev. 2 (card=101)
    em28xx 1-1.5:1.0: Currently, V4L2 is not supported on this model
    em28xx 1-1.5:1.0: dvb set to isoc mode.
    usbcore: registered new interface driver em28xx
    em28xx 1-1.5:1.0: Binding audio extension
    em28xx 1-1.5:1.0: em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
    em28xx 1-1.5:1.0: em28xx-audio.c: Copyright (C) 2007-2016 Mauro Carvalho Chehab
    em28xx 1-1.5:1.0: Endpoint 0x83 high-speed on intf 0 alt 7 interval = 8, size 196
    em28xx 1-1.5:1.0: Number of URBs: 1, with 64 packets and 192 size
    em28xx 1-1.5:1.0: Audio extension successfully initialized
    em28xx: Registered (Em28xx Audio Extension) extension
    em28xx 1-1.5:1.0: Binding DVB extension
    drxk: status = 0x639260d9
    drxk: detected a drx-3926k, spin A3, xtal 20.250 MHz
    drxk: DRXK driver version 0.9.4300
    drxk: frontend initialized.
    tda18271 4-0060: creating new instance
    tda18271: TDA18271HD/C2 detected @ 4-0060
    dvbdev: DVB: registering new adapter (1-1.5:1.0)
    em28xx 1-1.5:1.0: DVB: registering adapter 0 frontend 0 (DRXK DVB-C DVB-T)...
    dvbdev: dvb_create_media_entity: media entity 'DRXK DVB-C DVB-T' registered.
    dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
    em28xx 1-1.5:1.0: DVB extension successfully initialized
    em28xx: Registered (Em28xx dvb Extension) extension
    em28xx 1-1.5:1.0: Registering input extension
    rc rc0: 1-1.5:1.0 IR as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/rc/rc0
    Registered IR keymap rc-nec-terratec-cinergy-xs
    input: 1-1.5:1.0 IR as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/rc/rc0/input0
    em28xx 1-1.5:1.0: Input extension successfully initalized
    em28xx: Registered (Em28xx Input Extension) extension
    tda18271: performing RF tracking filter calibration
    tda18271: RF tracking filter calibration complete

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 15:45:28 -03:00
Mauro Carvalho Chehab b1e1d4532e media: em28xx: Ignore errors while reading from eeprom
While testing support for Terratec H6 rev. 2, it was noticed
that reading from eeprom there causes a timeout error.

Apparently, this is due to the need of properly setting GPIOs.

In any case, the driver doesn't really require eeprom reading
to succeed, as this is currently used only for debug.

So, Ignore such errors.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 15:43:51 -03:00
Dan Carpenter 66083b49bd media: dib0700: fix error handling in dib0700_i2c_xfer_legacy()
Mostly this adds some unlocks to error paths.  But, if you see where
there were "break;" statements before, I changed those paths to return
error codes instead of returning success.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 15:41:57 -03:00
Dan Carpenter d18a6ef59c media: dib0700: fix locking in dib0700_i2c_xfer_new()
This patch mostly adds unlocks to error paths.  But one additional small
change is that I made the first "break;" a "goto unlock;" which means
that now we return failure instead of success on that path.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 15:38:37 -03:00
Gustavo A. R. Silva dbe885a5dd media: tuners: mxl5005s: remove useless variable assignments
Values assigned to variables Fmax and Fmin at lines 2740 and 2741 are
overwritten at lines 2754 and 2755 before they can be used. This makes
such variable assignments useless.

Addresses-Coverity-ID: 1226952
Addresses-Coverity-ID: 1226953

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 15:29:33 -03:00
Daniel Scheller f9c1e254e1 media: dvb-frontends/stv0367: deduplicate DDB dvb_frontend_ops caps
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 10:47:18 -03:00
Daniel Scheller 11e358bf37 media: ddbridge: use dev_* macros in favor of printk
Side effect: KERN_DEBUG messages aren't written to the kernel log anymore.
This also improves the tda18212_ping reporting a bit so users know that if
pinging wasn't successful, bad things will happen.

Since in module_init_ddbridge() there's no dev yet, pr_info is used
instead.

Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 09:41:55 -03:00
Daniel Scheller d52786ddd2 media: ddbridge: make (ddb)readl in while-loops fail-safe
Reported by smatch:

  drivers/media/pci/ddbridge/ddbridge-core.c:1246 input_tasklet() warn: this loop depends on readl() succeeding
  drivers/media/pci/ddbridge/ddbridge-core.c:1768 flashio() warn: this loop depends on readl() succeeding
  drivers/media/pci/ddbridge/ddbridge-core.c:1788 flashio() warn: this loop depends on readl() succeeding

Fix this by introducing safe_ddbreadl() which will wrap ddbreadl and checks
for all bits set in the return which indicates failure, and return 0 in
that case. Usable as drop-in-replacement in all affected while loops w/o
having to change the logic.

Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 09:41:30 -03:00
Philipp Zabel cb778f5c85 media: coda: rename the picture run timeout error handler
I would have liked the the picture run timeout error handler to be renamed to
something a bit more descriptive in the original commit fb2be08f8c ("[media]
coda: first step at error recovery").
Somehow v1 [1] was merged instead of v2 [2].

[1] https://patchwork.kernel.org/patch/9663965/
[2] https://patchwork.kernel.org/patch/9774239/

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 09:39:29 -03:00