Commit Graph

601 Commits

Author SHA1 Message Date
Richard Weinberger c0ddc8c745 localmodconfig: Use Kbuild files too
In kbuild it is allowed to define objects in files named "Makefile"
and "Kbuild".
Currently localmodconfig reads objects only from "Makefile"s and misses
modules like nouveau.

Link: http://lkml.kernel.org/r/1437948415-16290-1-git-send-email-richard@nod.at

Cc: stable@vger.kernel.org
Reported-and-tested-by: Leonidas Spyropoulos <artafinde@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-08-11 17:34:35 -04:00
Linus Torvalds a95cb3cd55 Merge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kconfig updates from Michal Marek:

 - kconfig conditions can use usual less/greater than comparisons

 - kconfig warns about stray characters in Kconfig files

 - bogus expression simplification removed

 - some minor fixes

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kconfig: re-generate *.c_shipped files after previous change
  kconfig: allow use of relations other than (in)equality
  kconfig: don't silently ignore unhandled characters
  kconfig: Wrap long "make help" text lines
  scripts/kconfig/Makefile: Cosmetic fixes
  scripts/kconfig/Makefile: Fix spelling of Qt
  Kconfig: Remove bad inference rules expr_eliminate_dups2()
2015-07-02 14:53:01 -07:00
Luis R. Rodriguez 6c6685055a kconfig: add xenconfig defconfig helper
This lets you build a kernel which can support xen dom0
or xen guests on i386, x86-64 and arm64 by just using:

   make xenconfig

You can start from an allnoconfig and then switch to xenconfig.
This also splits out the options which are available currently
to be built with x86 and 'make ARCH=arm64' under a shared config.

Technically xen supports a dom0 kernel and also a guest
kernel configuration but upon review with the xen team
since we don't have many dom0 options its best to just
combine these two into one.

A few generic notes: we enable both of these:

CONFIG_INET=y
CONFIG_BINFMT_ELF=y

although technically not required given you likely will
end up with a pretty useless system otherwise.

A few architectural differences worth noting:

$ make allnoconfig; make xenconfig > /dev/null ; \
	grep XEN .config > 64-bit-config
$ make ARCH=i386 allnoconfig; make ARCH=i386 xenconfig > /dev/null; \
	grep XEN .config > 32-bit-config
$ make ARCH=arm64 allnoconfig; make ARCH=arm64 xenconfig > /dev/null; \
	grep XEN .config > arm64-config

Since the options are already split up with a generic config and
architecture specific configs you anything on the x86 configs
are known to only work right now on x86. For instance arm64 doesn't
support MEMORY_HOTPLUG yet as such although we try to enabe it
generically arm64 doesn't have it yet, so we leave the xen
specific kconfig option XEN_BALLOON_MEMORY_HOTPLUG on x86's config
file to set expecations correctly.

Then on x86 we have differences between i386 and x86-64. The difference
between 64-bit-config and 32-bit-config is you don't get XEN_MCE_LOG as
this is only supported on 64-bit. You also do not get on i386
XEN_BALLOON_MEMORY_HOTPLUG, there does not seem to be any technical
reasons to not allow this but I gave up after a few attempts.

Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: penberg@kernel.org
Cc: levinsasha928@gmail.com
Cc: mtosatti@redhat.com
Cc: fengguang.wu@intel.com
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: xen-devel@lists.xenproject.org
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Michal Marek <mmarek@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-06-16 11:04:29 +01:00
Luis R. Rodriguez 9bcd776d29 kconfig: clarify kvmconfig is for kvm
We'll be adding options for xen as well.

Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: penberg@kernel.org
Cc: levinsasha928@gmail.com
Cc: mtosatti@redhat.com
Cc: fengguang.wu@intel.com
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: xen-devel@lists.xenproject.org
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-06-16 11:04:21 +01:00
Jan Beulich 4a47f1eb35 kconfig: re-generate *.c_shipped files after previous change
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-06-15 14:05:58 +02:00
Jan Beulich 31847b67be kconfig: allow use of relations other than (in)equality
Over the years I found it desirable to be able to use all sorts of
relations, not just (in)equality. And apparently I'm not the only one,
as there's at least one example in the tree where the programmer
assumed this would work (see DEBUG_UART_8250_WORD in
arch/arm/Kconfig.debug). Another possible use would e.g. be to fold the
two SMP/NR_CPUS prompts into one: SMP could be promptless, simply
depending on NR_CPUS > 1.

A (desirable) side effect of this change - resulting from numeric
values now necessarily being compared as numbers rather than as
strings - is that comparing hex values now works as expected: Other
than int ones (which aren't allowed to have leading zeroes), zeroes
following the 0x prefix made them compare unequal even if their values
were equal.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-06-15 14:05:58 +02:00
Jan Beulich 2e0d737fc7 kconfig: don't silently ignore unhandled characters
At the very least we should tell people that what they wrote is not
what the utility understands.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-06-11 14:25:56 +02:00
Geert Uytterhoeven fa75a727c0 kconfig: Wrap long "make help" text lines
Some "make help" text lines extend beyond 80 characters. Wrap them at 79
characters.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-06-04 16:41:47 +02:00
Diego Viola 39c3f1ba5e scripts/kconfig/Makefile: Cosmetic fixes
Signed-off-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-06-03 10:56:12 +02:00
Diego Viola 092373c2b8 scripts/kconfig/Makefile: Fix spelling of Qt
Signed-off-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-05-28 16:27:02 +08:00
Martin Walch e911503085 Kconfig: Remove bad inference rules expr_eliminate_dups2()
expr_eliminate_dups2() in scripts/kconfig/expr.c applies two invalid
inference rules:

(FOO || BAR) && (!FOO && !BAR) -> n
(FOO && BAR) || (!FOO || !BAR) -> y

They would be correct in propositional logic, but this is a three-valued
logic, and here it is wrong in that it changes semantics. It becomes
immediately visible when assigning the value 1 to both, FOO and BAR:

(FOO || BAR) && (!FOO && !BAR)
-> min(max(1, 1), min(2-1, 2-1)) = min(1, 1) = 1

while n evaluates to 0 and

(FOO && BAR) || (!FOO || !BAR)
-> max(min(1, 1), max(2-1, 2-1)) = max(1, 1) = 1

with y evaluating to 2.

Fix it by removing expr_eliminate_dups2() and the functions that have no
use anywhere else: expr_extract_eq_and(), expr_extract_eq_or(),
and expr_extract_eq() from scripts/kconfig/expr.c

Currently the bug is not triggered in mainline, so this patch does not
modify the configuration space there. To observe the bug consider this
example:

config MODULES
        def_bool y
        option modules

config FOO
        def_tristate m

config BAR
        def_tristate m

config TEST1
        def_tristate y
        depends on (FOO || BAR) && (!FOO && !BAR)

if TEST1 = n
comment "TEST1 broken"
endif

config TEST2
        def_tristate y
        depends on (FOO && BAR) || (!FOO || !BAR)

if TEST2 = y
comment "TEST2 broken"
endif

config TEST3
        def_tristate y
        depends on m && !m

if TEST3 = n
comment "TEST3 broken"
endif

TEST1, TEST2 and TEST3 should all evaluate to m, but without the patch,
none of them does. It is probably not obvious that TEST3 is the same bug,
but it becomes clear when considering what happens internally to the
expression
m && !m":
First it expands to
(m && MODULES) && !(m && MODULES),
then it is transformed into
(m && MODULES) && (!m || !MODULES),
and finally due to the bug it is replaced with n.

As a side effect, this patch reduces code size in expr.c by roughly 10%
and slightly improves startup time for all configuration frontends.

Signed-off-by: Martin Walch <walch.martin@web.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-05-25 16:04:12 +08:00
Michal Marek 0a1f00a1c8 kconfig: Do not print status messages in make -s mode
Add an -s option to the various frontends and pass it when make -s is
used. Also, use $(kecho) instead of @echo in the Makefile.

Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-04-09 17:44:34 +02:00
Michal Marek 1cba0c3057 kconfig: Simplify Makefile
Use a single rule for targets handled directly by the conf program.

Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-04-08 13:05:41 +02:00
Masahiro Yamada 63a91033d5 kbuild: add generic mergeconfig target, %.config
"scripts/kconfig/merge_config.sh && make oldconfig" works well
enough for merging local config fragments, but Kbuild currently has
the entry points only for "kvmconfig" and "tinyconfig".

This commit provides the generic target for mergeconfig, so we can
manage our own config fragments easily:
put "foo.config" in arch/$(SRCARCH)/configs/ or kernel/configs/,
and then run "make foo.config".

Now "make kvmconfig" is just a shorthand of "make kvm_guest.config".
Likewise, "make tinyconfig" is equivalent to
"make allnoconfig tiny.config".

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-03-24 16:48:44 +01:00
Masahiro Yamada bc8f8f5fc4 merge_config.sh: rename MAKE to RUNMAKE
The variable "MAKE" is used to store the command name that has
invoked the Makefile.  (Actually, it is already set to "make"
if you run this script from a Makefile.)

In this script, however, it is used to determine if Make should be
run or not.  It is not what we usually expect.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-03-24 16:48:44 +01:00
Masahiro Yamada 3a975b8cfc merge_config.sh: improve indentation
It is true that we do not want to move the code too far to the
right, but something like below is not preferred:

    if [ "x$PREV_VAL" != "x$NEW_VAL" ] ; then
    echo Value of $CFG is redefined by fragment $MERGE_FILE:
    echo Previous  value: $PREV_VAL
    echo New value:       $NEW_VAL
    echo
    elif [ "$WARNREDUN" = "true" ]; then
    echo Value of $CFG is redundant by fragment $MERGE_FILE:
    fi

To fix this, call "continue" if the "grep" command fails to find the
given CONFIG.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-03-24 16:48:44 +01:00
Masahiro Yamada 371cfd4ff0 kbuild: mergeconfig: remove redundant $(objtree)
Kbuild always runs in $(objtree).  Actually, $(objtree) is always
set to "." by the top-level Makefile.

We can omit "-O $(objtree)" and "$(objtree)/".

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-03-24 16:48:44 +01:00
Masahiro Yamada b9fe99c5b9 kbuild: mergeconfig: move an error check to merge_config.sh
Currently, "make tinyconfig" does not work with "-j" option.

  $ make mrproper
  $ make -j8 tinyconfig
    HOSTCC  scripts/basic/fixdep
    HOSTCC  scripts/kconfig/conf.o
    SHIPPED scripts/kconfig/zconf.tab.c
    SHIPPED scripts/kconfig/zconf.lex.c
    SHIPPED scripts/kconfig/zconf.hash.c
    HOSTCC  scripts/kconfig/zconf.tab.o
    HOSTLD  scripts/kconfig/conf
  scripts/kconfig/conf --allnoconfig Kconfig
  #
  # configuration written to .config
  #
  scripts/kconfig/Makefile:122: *** You need an existing .config
  for this target.  Stop.
  make: *** [tinyconfig] Error 2

As shown above, "allnoconfig" has created the .config file before
mergeconfig is called, but Make still raises a false alarm because
of some sort of race condition.

We can fix this issue by moving the error check to the shell script.

Anyway, scripts/kconfig/merge_config.sh always requires an existing
.config as a base file.  It is reasonable to check its existence in
the shell script.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-03-24 16:48:44 +01:00
Masahiro Yamada de46199372 kbuild: mergeconfig: fix "jobserver unavailable" warning
If "make kvmconfig" is run with "-j" option, a warning message,
"jobserver unavailable: using -j1.  Add `+' to parent make rule.",
is displayed.

  $ make -s defconfig
  *** Default configuration is based on 'x86_64_defconfig'
  #
  # configuration written to .config
  #
  $ make -j8 kvmconfig
  Using ./.config as base
  Merging ./arch/x86/configs/kvm_guest.config
    [ snip ]
  #
  # merged configuration written to ./.config (needs make)
  #
  make[2]: warning: jobserver unavailable: using -j1.  Add `+' to
  parent make rule.
  scripts/kconfig/conf --oldconfig Kconfig
    [ snip ]
  #
  # configuration written to .config
  #

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-03-24 16:48:44 +01:00
Michal Marek ad8d40cda3 kconfig: Remove unnecessary prototypes from headers
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-02-25 15:00:17 +01:00
Michal Marek 463157444e kconfig: Remove dead code
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-02-25 15:00:16 +01:00
Michal Marek 70529b1a17 kconfig: Get rid of the P() macro in headers
This was originally meant for dlopen()ing a potential kconfig shared
library. The unused dlopen code has already been removed in commit
5a6f8d2b (kconfig: nuke LKC_DIRECT_LINK cruft), so let's remove the
rest. The lkc_proto.h change was made with the following sed script:

  sed -r 's/^P\(([^,]*), *([^,]*), *(.*)\);/\2 \1\3;/'

Plus some manual adjustments.

Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-02-25 15:00:16 +01:00
Masahiro Yamada 4980bdf021 kconfig: fix a misspelling in scripts/kconfig/merge_config.sh
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-02-25 14:59:14 +01:00
Colin Ian King b6a2ab2cd4 kconfig: use va_end to match corresponding va_start
Although on some systems va_end is a no-op, it is good practice
to use va_end, especially since the manual states:

"Each invocation of va_start() must be matched by a corresponding
invocation of va_end() in the same function."

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-01-27 16:52:43 +01:00
Olof Johansson 09950bc256 merge_config.sh: Display usage if given too few arguments
Two or more arguments are always expected. Show usage and exit if
given less.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-01-07 21:28:12 +01:00
Linus Torvalds d08372ca28 Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild updates from Michal Marek:
 "Here are the kbuild changes for v3.19-rc1:

   - Cleanups and deduplication in the main Makefile and
     scripts/Makefile.*
   - Sort the output of *config targets in make help
   - Old <linux/version.h> is always removed to avoid a surprise during
     bisecting
   - Warning fix in kconfig"

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: remove redundant -rR flag of hdr-inst
  kbuild: Fix make help-<board series> on powerpc
  kbuild: Automatically remove stale <linux/version.h> file
  kconfig: Fix warning "‘jump’ may be used uninitialized"
  Makefile: sort list of defconfig targets in make help output
  kbuild: Remove duplicate $(cmd) definition in Makefile.clean
  kbuild: collect shorthands into scripts/Kbuild.include
2014-12-20 13:31:14 -08:00
Linus Torvalds 88a57667f2 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes and cleanups from Ingo Molnar:
 "A kernel fix plus mostly tooling fixes, but also some tooling
  restructuring and cleanups"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
  perf: Fix building warning on ARM 32
  perf symbols: Fix use after free in filename__read_build_id
  perf evlist: Use roundup_pow_of_two
  tools: Adopt roundup_pow_of_two
  perf tools: Make the mmap length autotuning more robust
  tools: Adopt rounddown_pow_of_two and deps
  tools: Adopt fls_long and deps
  tools: Move bitops.h from tools/perf/util to tools/
  tools: Introduce asm-generic/bitops.h
  tools lib: Move asm-generic/bitops/find.h code to tools/include and tools/lib
  tools: Whitespace prep patches for moving bitops.h
  tools: Move code originally from asm-generic/atomic.h into tools/include/asm-generic/
  tools: Move code originally from linux/log2.h to tools/include/linux/
  tools: Move __ffs implementation to tools/include/asm-generic/bitops/__ffs.h
  perf evlist: Do not use hard coded value for a mmap_pages default
  perf trace: Let the perf_evlist__mmap autosize the number of pages to use
  perf evlist: Improve the strerror_mmap method
  perf evlist: Clarify sterror_mmap variable names
  perf evlist: Fixup brown paper bag on "hint" for --mmap-pages cmdline arg
  perf trace: Provide a better explanation when mmap fails
  ...
2014-12-19 13:15:24 -08:00
Arjun Sreedharan e4e458b45c calloc/xcalloc: Fix argument order
The calloc() and xcalloc() functions takes @nmemb first and then @size.  Fix all w/
pattern "calloc\s*(\s*sizeof".

Signed-off-by: Arjun Sreedharan <arjun024@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1417866043-1877-1-git-send-email-arjun024@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-12-09 10:06:29 -03:00
Peter Kümmel 2d56030609 kconfig: Fix warning "‘jump’ may be used uninitialized"
Warning:
In file included from scripts/kconfig/zconf.tab.c:2537:0:
scripts/kconfig/menu.c: In function ‘get_symbol_str’:
scripts/kconfig/menu.c:590:18: warning: ‘jump’ may be used uninitialized in this function [-Wmaybe-uninitialized]
     jump->offset = strlen(r->s);

Simplifies the test logic because (head && local) means (jump != 0)
and makes GCC happy when checking if the jump pointer was initialized.

Signed-off-by: Peter Kümmel <syntheticpp@gmx.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-11-28 14:39:13 +01:00
Andrey Utkin 3943f42c11 Replace mentions of "list_struct" to "list_head"
There's no such thing as "list_struct".

Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-20 14:45:15 +01:00
Linus Torvalds f33a3faa25 Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild changes from Michal Marek:
 - fix for handling dependencies of *-objs targets by Masahiro Yamada
 - lots of cleanups in the kbuild machinery, also by Masahiro
 - fixes for the kconfig build to use an UTF-8 capable ncurses library
   if possible and to build on not-so-standard installs
 - some more minor fixes

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: Do not reference *-n variables in the Makefile
  kbuild: simplify build, clean, modbuiltin shorthands
  kbuild: arm: Do not define "comma" twice
  kbuild: remove obj-n and lib-n handling
  kbuild: remove unnecessary variable initializaions
  kbuild: remove unnecessary "obj- := dummy.o" trick
  kbuild: handle C=... and M=... after entering into build directory
  kbuild: use $(Q) for sub-make target
  kbuild: fake the "Entering directory ..." message more simply
  kconfig/lxdialog: get ncurses CFLAGS with pkg-config
  kconfig: nconfig: fix multi-byte UTF handling
  kconfig: lxdialog: fix spelling
  kbuild: Make scripts executable
  kbuild: remove redundant clean-files from scripts/kconfig/Makefile
  kbuild: refactor script/kconfig/Makefile
  kbuild: handle the dependency of multi-objs hostprogs appropriately
  kbuild: handle multi-objs dependency appropriately
2014-10-14 09:22:26 +02:00
Bjørn Forsman be8af2d54a kconfig/lxdialog: get ncurses CFLAGS with pkg-config
This makes "make menuconfig" also work on systems where ncurses is not
installed in a standard location (such as on NixOS).

This patch changes ccflags() so that it tries pkg-config first, and only
if pkg-config fails does it go back to the fallback/manual checks. This
is the same algorithm that ldflags() already uses.

Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-09-23 15:47:48 +02:00
Brian Norris 7285996aa0 kconfig: nconfig: fix multi-byte UTF handling
Currently, Kconfig descriptions that use multi-byte UTF-8 characters
(such as MTD_NAND_CAFE) will have their menu entries dropped from the
'make nconfig' ncurses menu, and all subsequent entries in the same
window will be omitted. This seems to be due to the ncurses 'menu'
library, which does not traditionally handle UTF-8 >8-bit characters
properly.

The ncursesw library ('w' is for "wide") is written to handle these
UTF-8 characters, and is practically a drop-in replacement at the source
level. Use it by default, if available.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=43067
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Martin Walch <walch.martin@web.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-08-22 11:46:49 +02:00
Brian Norris c40724d3f3 kconfig: lxdialog: fix spelling
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-08-22 11:46:49 +02:00
Michal Marek 06ed5c2bfa kbuild: Make scripts executable
The Makefiles call the respective interpreter explicitly, but this makes
it easier to use the scripts manually.

Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-08-20 16:03:45 +02:00
Masahiro Yamada 221ecca6ca kbuild: remove redundant clean-files from scripts/kconfig/Makefile
Now mconf, qconf, gconf, nconf are always added to hostprogs-y.
Files added to hostprogs-y are removed by "make clean".

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-08-19 10:26:20 +02:00
Masahiro Yamada 022af62d01 kbuild: refactor script/kconfig/Makefile
Now it is harmless to add all host programs to hostprogs-y.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-08-19 10:26:20 +02:00
Josh Triplett 0da1d4a0b9 x86: Add "make tinyconfig" to configure the tiniest possible kernel
Since commit 5d2acfc7b9 ("kconfig: make
allnoconfig disable options behind EMBEDDED and EXPERT") in 3.15-rc1,
"make allnoconfig" disables every possible config option.

However, a few configuration options (CC_OPTIMIZE_FOR_SIZE,
OPTIMIZE_INLINING) produce a smaller kernel when turned on, and a few
choices exist (compression, highmem, allocator) for which a non-default
option produces a smaller kernel.

Add a "tinyconfig" option, which starts from allnoconfig and then sets
these options to configure the tiniest possible kernel.  This provides a
better baseline for embedded systems or efforts to reduce kernel size.

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
2014-08-08 16:30:24 -07:00
Josh Triplett 3aaefce103 x86, platform, kconfig: move kvmconfig functionality to a helper
The new mergeconfig helper makes it easier to add other partial
configurations similar to kvmconfig.  Architecture-independent portions
of those partial configurations should go in
kernel/configs/${name}.config, and architecture-dependent portions
should go in arch/${arch}/configs/${name}.config.

Based on a patch by Luis R. Rodriguez <mcgrof@suse.com>.
Originally-Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>

Modified to make the helper name more general than just virtualization,
support architecture-dependent and architecture-independent partial
configurations, move the helper and kvmconfig to
scripts/kconfig/Makefile, and factor out more of the common file path.

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
2014-08-08 16:27:14 -07:00
Linus Torvalds c1fdb2d338 Merge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild misc updates from Michal Marek:
 "This is the non-critical part of kbuild for v3.16-rc1:
   - make deb-pkg can do s390x and arm64
   - new patterns in scripts/tags.sh
   - scripts/tags.sh skips userspace tools' sources (which sometimes
     have copies of kernel structures) and symlinks
   - improvements to the objdiff tool
   - two new coccinelle patches
   - other minor fixes"

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  scripts: objdiff: support directories for the augument of record command
  scripts: objdiff: fix a comment
  scripts: objdiff: change the extension of disassembly from .o to .dis
  scripts: objdiff: improve path flexibility for record command
  scripts: objdiff: remove unnecessary code
  scripts: objdiff: direct error messages to stderr
  scripts: objdiff: get the path to .tmp_objdiff more simply
  deb-pkg: Add automatic support for s390x architecture
  coccicheck: Add unneeded return variable test
  kbuild: Fix a typo in documentation
  kbuild: trivial - use tabs for code indent where possible
  kbuild: trivial - remove trailing empty lines
  coccinelle: Check for missing NULL terminators in of_device_id tables
  scripts/tags.sh: ignore symlink'ed source files
  scripts/tags.sh: add regular expression replacement pattern for memcg
  builddeb: add arm64 in the supported architectures
  builddeb: use $OBJCOPY variable instead of objcopy
  scripts/tags.sh: ignore code of user space tools
  scripts/tags.sh: add pattern for DEFINE_HASHTABLE
  .gitignore: ignore Module.symvers in all directories
2014-06-12 21:29:20 -07:00
Masahiro Yamada bb66fc6719 kbuild: trivial - use tabs for code indent where possible
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-06-10 14:00:53 +02:00
Masahiro Yamada 9815594a78 kbuild: create include/config directory in scripts/kconfig/Makefile
The directory include/config is used only for
silentoldconfig, localmodconfig, localyesconfig.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-06-10 00:20:20 +02:00
Masahiro Yamada 7eb6e34052 kbuild: trivial - remove trailing empty lines
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-06-10 00:04:06 +02:00
Masahiro Yamada 38385f8f01 kbuild: trivial - remove trailing spaces
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-04-30 17:34:32 +02:00
Josh Triplett 5d2acfc7b9 kconfig: make allnoconfig disable options behind EMBEDDED and EXPERT
"make allnoconfig" exists to ease testing of minimal configurations.
Documentation/SubmitChecklist includes a note to test with allnoconfig.
This helps catch missing dependencies on common-but-not-required
functionality, which might otherwise go unnoticed.

However, allnoconfig still leaves many symbols enabled, because they're
hidden behind CONFIG_EMBEDDED or CONFIG_EXPERT.  For instance, allnoconfig
still has CONFIG_PRINTK and CONFIG_BLOCK enabled, so drivers don't
typically get build-tested with those disabled.

To address this, introduce a new Kconfig option "allnoconfig_y", used on
symbols which only exist to hide other symbols.  Set it on CONFIG_EMBEDDED
(which then selects CONFIG_EXPERT).  allnoconfig will then disable all the
symbols hidden behind those.

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:09 -07:00
Steven Rostedt (Red Hat) 95edca5c52 localmodconfig: Add config depends by default settings
Currently localmodconfig will miss dependencies from the default option.
For example:

config FOO
	default y if BAR || ZOO

If FOO is needed for a module and is set to '=m', and so are BAR or ZOO,
localmodconfig will not see that BOO or ZOO are also needed for the foo
module, and will incorrectly disable them.

Link: http://lkml.kernel.org/r/20131218175137.162937350@goodmis.org

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-20 17:02:44 -05:00
Ben Hutchings 00d4f8fc2c xconfig: Fix the filename for GUI settings
Currently the qconf program invoked by 'make xconfig' stores GUI
settings in the file ~/.config/Unknown\ Organization.conf.  This name
is apparently generated by the QSettings class when no organisation
or application name are specified.

This is obviously not a sensible filename (nor does it seem sensible
that these QSettings parameters are optional!).  Pass the names
'kernel.org' and 'qconf', resuling in the filename
~/.config/kernel.org/qconf.conf.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-10-08 23:52:16 +02:00
Martin Walch 503c823048 kconfig: fix bug in search results string: use strlen(gstr->s), not gstr->len
The struct gstr has a capacity that may differ from the actual string length.

However, a string manipulation in the function search_conf made the assumption
that it is the same, which led to messing up some search results, especially
when the content of the gstr in use had not yet reached at least 63 chars.

Signed-off-by: Martin Walch <walch.martin@web.de>
Acked-by: Wang YanQing <udknight@gmail.com>
Acked-by: Benjamin Poirier <bpoirier@suse.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-10-08 23:52:16 +02:00
Martin Walch 3381960031 kconfig: remove unused definition from scanner
The definition ws [ \n\t] is not used anywhere. Drop it to avoid confusion.

As it is a dead definition, any changes in the resulting code generated by
flex would be surprising (actually testing this showed that there are really
no changes). So, there is no need to touch the existing zconf.lex.c_shipped.

Signed-off-by: Martin Walch <walch.martin@web.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN: <yann.morin.1998@free.fr>
2013-10-08 23:52:15 +02:00
Martin Walch 57540f1dea kconfig: adjust warning message for conflicting types
Each symbol must have exactly one type assigned. However, if a symbol happens
to have two different types assigned at runtime, a warning is printed and the
first type is preserved while the second type is being ignored.

The warning message says

type of <symbol name> redefined from <first type> to <second type>

which may be misleading as it may create the impression that the second type
replaces the first type.

This patch clarifies this by changing the warning to

ignoring type redefinition of <symbol name> from <first type> to <second type>

Signed-off-by: Martin Walch <walch.martin@web.de>
Acked-by: Wang YanQing <udknight@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-10-08 23:52:15 +02:00