Commit Graph

89 Commits

Author SHA1 Message Date
Michal Marek ad8d40cda3 kconfig: Remove unnecessary prototypes from headers
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-02-25 15:00:17 +01:00
Colin Ian King b6a2ab2cd4 kconfig: use va_end to match corresponding va_start
Although on some systems va_end is a no-op, it is good practice
to use va_end, especially since the manual states:

"Each invocation of va_start() must be matched by a corresponding
invocation of va_end() in the same function."

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-01-27 16:52:43 +01:00
Josh Triplett 5d2acfc7b9 kconfig: make allnoconfig disable options behind EMBEDDED and EXPERT
"make allnoconfig" exists to ease testing of minimal configurations.
Documentation/SubmitChecklist includes a note to test with allnoconfig.
This helps catch missing dependencies on common-but-not-required
functionality, which might otherwise go unnoticed.

However, allnoconfig still leaves many symbols enabled, because they're
hidden behind CONFIG_EMBEDDED or CONFIG_EXPERT.  For instance, allnoconfig
still has CONFIG_PRINTK and CONFIG_BLOCK enabled, so drivers don't
typically get build-tested with those disabled.

To address this, introduce a new Kconfig option "allnoconfig_y", used on
symbols which only exist to hide other symbols.  Set it on CONFIG_EMBEDDED
(which then selects CONFIG_EXPERT).  allnoconfig will then disable all the
symbols hidden behind those.

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:09 -07:00
Yann E. MORIN 04b19b773a kconfig: silence warning when parsing auto.conf when a symbol has changed type
When a symbol changes type from tristate to bool, and was previously set to
'm', a subsequent silentoldconfig would warn about inconsistency, such as:

    include/config/auto.conf:3014:warning: symbol value 'm' invalid for
    HOTPLUG_PCI_PCIE

Seen by Linus with the merge in aa8032b (sequence to reproduce by Michal):
    git checkout 1fe0135
    make mrproper
    make allmodconfig
    make silentoldconfig
    git checkout aa8032b
    make allmodconfig
    make silentoldconfig

Since HOTPLUG_PCI_PCIE changed from tristate to bool in aa8032b, it was
previously set to 'm' in auto.conf by the first allmodconfig+silentoldconfig,
but then was set to 'y' by the second allmodconfig. Then the second
silentoldconfig prints the warning.

The warning in this case is a spurious warning, which happens at the time
kconfig tries to detect symbols that have changed, to touch the empty
header files in include/config used for dependency-tracking by make.

Silence the warning when we read the old auto.conf file, since it is
perfectly legit that a symbol changed type since the previous call.

Thread in:
    http://marc.info/?l=linux-pci&m=137569198904000&w=2

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-15 22:48:08 +02:00
Yann E. MORIN 490f161711 Revert "kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG"
This reverts commit 8357b48549.

It breaks more stuff than it fixes.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-06-26 15:49:00 +02:00
Yann E. MORIN 8357b48549 kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG
Currently, randconfig does randomise choice entries, unless KCONFIG_ALLCONFIG
is specified.

For example, given those two files (Thomas' test-case):

    ---8<--- Config.test.in
    config OPTIONA
        bool "Option A"

    choice
        prompt "This is a choice"

    config CHOICE_OPTIONA
        bool "Choice Option A"

    config CHOICE_OPTIONB
        bool "Choice Option B"

    endchoice

    config OPTIONB
        bool "Option B"
    ---8<--- Config.test.in

    ---8<--- config.defaults
    CONFIG_OPTIONA=y
    ---8<--- config.defaults

And running:
    ./scripts/kconfig/conf --randconfig Config.test.in

does properly randomise the two choice symbols (and the two booleans).

However, running:
    KCONFIG_ALLCONFIG=config.defaults \
    ./scripts/kconfig/conf --randconfig Config.test.in

does *not* reandomise the two choice entries, and only CHOICE_OPTIONA
will ever be selected. (OPTIONA will always be set (expected), and
OPTIONB will be be properly randomised (expected).)

This patch defers setting that a choice has a value until a symbol for
that choice is indeed set, so that choices are properly randomised when
KCONFIG_ALLCONFIG is set, but not if a symbol for that choice is set.

Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>

---
Changes v3 -> v4
  - fix previous issue where some choices would not be set, which would
    cause silentoldconfig to ask for them and was then breaking this
    workflow (as reported by Arnd and Sedat):
        KCONFIG_ALLCONFIG=foo.defconfig make randconfig
        make silentoldconfig </dev/nullo
    which I have tested (3h28min!) with:
        touch defconfig
        for(( i=0; i<10000; i++ )); do
            KCONFIG_ALLCONFIG=$(pwd)/defconfig make randconfig >/dev/null 2>&1
            make silentoldconfig </dev/null >/dev/null 2>&1 || break
        done
    which did not break at all.
  - change done in v3 (below) is already fixed by a previous patch

Changes v2 -> v3
  - ensure only one symbol is set in a choice

Changes v1 -> v2:
  - further postpone setting that a choice has a value until
    one is indeed set
  - do not print symbols that are part of an invisible choice
2013-06-24 20:03:31 +02:00
Yann E. MORIN 3b9a19e089 kconfig: loop as long as we changed some symbols in randconfig
Because of choice-in-a-choice constructs, it can happen that not all
symbols are assigned a value during randconfig, leading in rare cases
to this situation:

    ---8<--- choice-in-choice.in
    choice
        bool "A/B/C"
    config A
        bool "A"

    config B
        bool "B"
    if B
    choice
        bool "E/F"
    config E
        bool "E"
    config F
        bool "F"
    endchoice
    endif # B

    config C
        bool "C"
    endchoice
    ---8<---

    $ ./scripts/kconfig/conf --randconfig choice-in-choice.in
    [--SNIP--]
    $ ./scripts/kconfig/conf --silentoldconfig choice-in-choice.in </dev/null
    [--SNIP--]
    A/B/C
      1. A (A)
    > 2. B (B)
      3. C (C)
    choice[1-3]: 2
      E/F
      > 1. E (E) (NEW)
        2. F (F) (NEW)
      choice[1-2]: aborted!

    Console input/output is redirected. Run 'make oldconfig' to update
    configuration.

Fix this by looping in randconfig for as long as some symbol gets assigned
a value.

Note: this was spotted with the USB EHCI Debug Device Gadget (USB_G_DBGP),
which uses this choice-in-a-choice construct, and exhibits this problem.
The example above is just a stripped-down minimalist test-case.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-06-24 20:03:30 +02:00
Yann E. MORIN e6abf12a77 kconfig/conf: fix randconfig setting multiple symbols in a choice
Currently, randconfig may set more than one symbol in a given choice.
Given this config file:
    config A
        bool "A"
    if A
    choice
        bool "B/C/D"
    config B
        bool "B"
    config C
        bool "C"
    config D
        bool "D"
    endchoice
    endif # A

Then randconfig generates such .config files (case where A is not set is not
shown below for brevity), and where only the right-most .config is valid:
  CONFIG_A=y                  CONFIG_A=y                  CONFIG_A=y
  CONFIG_B=y                  CONFIG_B=y                  CONFIG_B=y
  CONFIG_C=y                  # CONFIG_C is not set       # CONFIG_C is not set
  # CONFIG_D is not set       CONFIG_D=y                  # CONFIG_D is not set

That is, in a randomised choice, the first symbol is always selected,
and at most one other symbol may be selected.

This is due to symbol randomised in a choice not being properly flagged
as having a value.

Fix that by flagging those symbols adequately: have a user-defined value,
and be not valid (to force recalculation of the symbol).

Note: if the choice is not conditional, then the randomisation is properly
done.

Reported-by: Matthieu CASTET <matthieu.castet@parrot.com>
Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com>
[yann.morin.1998@free.fr: independently re-done the same patch as Matthieu,
                          as pointed out by Sedat]
Cc: Arnaud Lacombe <lacombar@gmail.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-06-18 23:59:00 +02:00
Arve Hjønnevåg fbe98bb9ed kconfig: Fix defconfig when one choice menu selects options that another choice menu depends on
The defconfig and Kconfig combination below, which is based on 3.10-rc4
Kconfigs, resulted in several options getting set to "m" instead of "y".

defconfig.choice:
---8<---
CONFIG_MODULES=y
CONFIG_USB_ZERO=y
---8<---

Kconfig.choice:
---8<---
menuconfig MODULES
	bool "Enable loadable module support"

config CONFIGFS_FS
	tristate "Userspace-driven configuration filesystem"

config OCFS2_FS
        tristate "OCFS2 file system support"
        depends on CONFIGFS_FS
        select CRC32

config USB_LIBCOMPOSITE
	tristate
	select CONFIGFS_FS

choice
	tristate "USB Gadget Drivers"
	default USB_ETH

config USB_ZERO
	tristate "Gadget Zero (DEVELOPMENT)"
	select USB_LIBCOMPOSITE

config USB_ETH
	tristate "Ethernet Gadget (with CDC Ethernet support)"
	select USB_LIBCOMPOSITE

endchoice

config CRC32
        tristate "CRC32/CRC32c functions"
        default y

choice
        prompt "CRC32 implementation"
        depends on CRC32
        default CRC32_SLICEBY8

config CRC32_SLICEBY8
        bool "Slice by 8 bytes"

endchoice
---8<---

$ scripts/kconfig/conf --defconfig=defconfig.choice Kconfig.choice

would result in:

.config:
---8<---
CONFIG_MODULES=y
CONFIG_CONFIGFS_FS=m
CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_ZERO=m
CONFIG_CRC32=y
CONFIG_CRC32_SLICEBY8=y
---8<---

when the expected result would be:

.config:
---8<---
CONFIG_MODULES=y
CONFIG_CONFIGFS_FS=y
CONFIG_USB_LIBCOMPOSITE=y
CONFIG_USB_ZERO=y
CONFIG_CRC32=y
CONFIG_CRC32_SLICEBY8=y
---8<---

Signed-off-by: Arve Hjønnevåg <arve@android.com>
[yann.morin.1998@free.fr: add the resulting .config to commit log,
                          remove unneeded USB_GADGET from the defconfig]
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2013-06-16 11:00:30 +02:00
Yann E. MORIN 23a5dfdad2 Revert "kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG"
This reverts commit 422c809f03.
It causes more harm than it solves issues.

Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Greg KH <greg@kroah.com>
2013-04-26 23:21:59 +02:00
Yann E. MORIN e43956e607 kconfig: implement KCONFIG_PROBABILITY for randconfig
Currently the odds to set each symbol is (rounded):
    booleans:   y: 50%          n: 50%
    tristates:  y: 33%  m: 33%  n: 33%

Introduce a KCONFIG_PROBABILITY environment variable to tweak the
probabilities (in percentage), as such:
    KCONFIG_PROBABILITY     y:n split           yⓂ️n split
    -----------------------------------------------------------------
[1] unset or empty          50  : 50            33  : 33  : 34
[2] N                        N  : 100-N         N/2 : N/2 : 100-N
    N:M                     N+M : 100-(N+M)      N  :  M  : 100-(N+M)
    N:M:L                    N  : 100-N          M  :  L  : 100-(M+L)

[1] The current behaviour is kept as default, for backward compatibility
[2] The solution initially implemented by Peter for Buildroot, see:
    http://git.buildroot.org/buildroot/commit/?id=3435c1afb5

Signed-off-by: Peter Korsgaard <jacmet@uclibc.org>
[yann.morin.1998@free.fr: add to Documentation/]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-04-25 00:16:30 +02:00
Yann E. MORIN 422c809f03 kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG
Currently, randconfig does randomise choice entries, unless KCONFIG_ALLCONFIG
is specified.

For example, given those two files (Thomas' test-case):

    ---8<--- Config.test.in
    config OPTIONA
        bool "Option A"

    choice
        prompt "This is a choice"

    config CHOICE_OPTIONA
        bool "Choice Option A"

    config CHOICE_OPTIONB
        bool "Choice Option B"

    endchoice

    config OPTIONB
        bool "Option B"
    ---8<--- Config.test.in

    ---8<--- config.defaults
    CONFIG_OPTIONA=y
    ---8<--- config.defaults

And running:
    ./scripts/kconfig/conf --randconfig Config.test.in

does properly randomise the two choice symbols (and the two booleans).

However, running:
    KCONFIG_ALLCONFIG=config.defaults \
    ./scripts/kconfig/conf --randconfig Config.test.in

does *not* reandomise the two choice entries, and only CHOICE_OPTIONA
will ever be selected. (OPTIONA will always be set (expected), and
OPTIONB will be be properly randomised (expected).)

This patch defers setting that a choice has a value until a symbol for
that choice is indeed set, so that choices are properly randomised when
KCONFIG_ALLCONFIG is set, but not if a symbol for that choice is set.

Also, as a side-efect, this patch fixes the following case:

    ---8<---
    choice
    config OPTION_A
        bool "Option A"
    config OPTION_B
        bool "Option B"
    config OPTION_C
        bool "Option C"
    endchoice
    ---8<---

which could previously generate such .config files:

    ---8<---                            ---8<---
    CONFIG_OPTION_A=y                   CONFIG_OPTION_A=y
    CONFIG_OPTION_B=y                   # CONFIG_OPTION_B is not set
    # CONFIG_OPTION_C is not set        CONFIG_OPTION_C=y
    ---8<---                            ---8<---

Ie., the first entry in a choice is always set, plus zero or one of
the other options may be set.

This patch ensures that only one option may be set for a choice.

Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Arnaud Lacombe <lacombar@gmail.com>

---
Changes v2 -> v3
  - ensure only one symbol is set in a choice

Changes v1 -> v2:
  - further postpone setting that a choice has a value until
    one is indeed set
  - do not print symbols that are part of an invisible choice
2013-04-25 00:16:12 +02:00
Yann E. MORIN cfa98f2e0a kconfig: do not override symbols already set
For randconfig, if a list of required symbols is specified with
KCONFIG_ALLCONFIG, such symbols do not "have a value" as per
sym_has_value(), but have the "valid" flag set.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-04-25 00:15:58 +02:00
Yann E. MORIN 61fa0e17f9 kconfig: fix randconfig tristate detection
Because the modules' symbole (CONFIG_MODULES) may not yet be set when
we check a symbol's tristate capabilty, we'll always find that tristate
symbols are booleans, even if we randomly decided that to enable modules:
sym_get_type(sym) always return boolean for tristates when modules_sym
has not been previously set to 'y' *and* its value calculated *and* its
visibility calculated, both of which only occur after we randomly assign
values to symbols.

Fix that by looking at the raw type of symbols. Tristate set to 'm' will
be promoted to 'y' when their values will be later calculated.

Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-04-25 00:15:47 +02:00
Cody Schafer 1a7a8c6fd8 kconfig: allow long lines in config file
For some config options (CONFIG_EXTRA_FIRMWARE, for example), the length
of a config file line can exceed the 1024 byte buffer.

Switch from fgets to compat_getline to fix. compat_getline is an
internally implimented getline work-alike for portability purposes.

Signed-off-by: Cody Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-07-13 22:51:30 +02:00
Paul Gortmaker e4757cab4c kconfig: delete last traces of __enabled_ from autoconf.h
We've now fixed IS_ENABLED() and friends to not require any special
"__enabled_" prefixed versions of the normal Kconfig options, so delete
the last traces of them being generated.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-12 18:35:58 -07:00
Paul Gortmaker a959613533 Revert "kconfig: fix __enabled_ macros definition for invisible and un-selected symbols"
This reverts commit 953742c8fe.

Dumping two lines into autoconf.h for all existing Kconfig options
results in a giant file (~16k lines) we have to process each time we
compile something.  We've weaned IS_ENABLED() and similar off of
requiring the __enabled_ definitions so now we can revert the change
which caused all the extra lines.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-12 18:35:58 -07:00
Arnaud Lacombe 5d09598d48 kconfig: fix new choices being skipped upon config update
Running `oldconfig' after any of the following configuration change:

either trivial addition, such as:

config A
	bool "A"

choice
	prompt "Choice ?"
	depends on A

	config CHOICE_B
		bool "Choice B"

	config CHOICE_C
		bool "Choice C"
endchoice

or more tricky change:

OLD KCONFIG                      |  NEW KCONFIG
                                 |
                                 |  config A
                                 |          bool "A"
                                 |
choice                           |  choice
        prompt "Choice ?"        |          prompt "Choice ?"
                                 |
        config CHOICE_C          |          config CHOICE_C
                bool "Choice C"  |                  bool "Choice C"
                                 |
        config CHOICE_D          |          config CHOICE_D
                bool "Choice D"  |                  bool "Choice D"
endchoice                        |
                                 |          config CHOICE_E
                                 |                  bool "Choice E"
                                 |                  depends on A
                                 |  endchoice

will not cause the choice to be considered as NEW, and thus not be
asked. The cause of this behavior is that choice's novelty are computed
statically right after the saved configuration has been read. At this
point, the new dependency's value is still unknown and asserted to be
`no'. Moreover, no update to this decision is made afterward.

Correct this by dynamically evaluating a choice's novelty, and removing the
static evaluation.

Reported-and-tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-01-26 11:01:56 +01:00
Peter Foley 70cc01e757 kconfig: use xfwrite wrapper function to silence warnings
Use the xfwrite wrapper function defined in lkc.h to check the return value of
fwrite and silence these warnings.

  HOSTCC  scripts/kconfig/zconf.tab.o
scripts/kconfig/zconf.tab.c: In function 'header_print_comment':
/usr/src/lto/scripts/kconfig/confdata.c:551:10: warning: ignoring return value of 'fwrite', declared with attribute warn_unused_result
scripts/kconfig/zconf.tab.c: In function 'kconfig_print_comment':
/usr/src/lto/scripts/kconfig/confdata.c:467:10: warning: ignoring return value of 'fwrite', declared with attribute warn_unused_result

Signed-off-by: Peter Foley <pefoley2@verizon.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-12-18 21:54:12 +01:00
Arnaud Lacombe 953742c8fe kconfig: fix __enabled_ macros definition for invisible and un-selected symbols
__enabled_<sym-name> are only generated on visible or selected entries, do not
reflect the purpose of its introduction.

Fix this by always generating these entries for named symbol.

Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-08-29 20:19:48 -04:00
Michal Marek 2a11c8ea20 kconfig: Introduce IS_ENABLED(), IS_BUILTIN() and IS_MODULE()
Replace the config_is_*() macros with a variant that allows for grepping
for usage of CONFIG_* options in the code. Usage:

  if (IS_ENABLED(CONFIG_NUMA))

or

  #if IS_ENABLED(CONFIG_NUMA)

The IS_ENABLED() macro evaluates to 1 if the argument is set (to either 'y'
or 'm'), IS_BUILTIN() tests if the option is 'y' and IS_MODULE() test if
the option is 'm'. Only boolean and tristate options are supported.

Reviewed-by: Arnaud Lacombe <lacombar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-07-29 21:53:30 +02:00
Arnaud Lacombe eb4cf5a642 kconfig: fix missing "0x" prefix from S_HEX symbol in autoconf.h
The specialized printer for headers (espectially autoconf.h) is missing
fixup code for S_HEX symbol's "0x" prefix. As long as kconfig does not
warn for such missing prefix, this code is needed. Fix this.

In the same time, fix some nits in `header_print_symbol()'.

Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>

Broken-by: Arnaud Lacombe <lacombar@gmail.com>
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Reported-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-07-18 16:29:29 +02:00
Arnaud Lacombe e54e692ba6 kconfig: introduce specialized printer
Make conf_write_symbol() grammar agnostic to be able to use it from different
code path. These path pass a printer callback which will print a symbol's name
and its value in different format.

conf_write_symbol()'s job become mostly only to prepare a string for the
printer. This avoid to have to pass specialized flag to generic
functions

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
[mmarek: rebased on top of de12518 (kconfig: autogenerated config_is_xxx
macro)]
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-07-01 16:23:27 +02:00
Michal Marek 36fee53510 Merge branch 'kconfig-trivial' of git://github.com/lacombar/linux-2.6 into kbuild/kconfig 2011-06-08 18:03:57 +02:00
Arnaud Lacombe 5a6f8d2bd9 kconfig: nuke LKC_DIRECT_LINK cruft
This interface is not (and has never been ?) used by any frontend, just get rid
of it.

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-06-06 15:32:20 -04:00
Arnaud Lacombe 10a4b2772e kconfig: add missing <stdarg.h> inclusion
This header is needed when using va_{start,end,copy}(3) functions family.

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-06-06 15:32:13 -04:00
Arnaud Lacombe 75f1468bea kconfig: fix return code for invalid boolean symbol in conf_set_sym_val()
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-06-06 15:32:11 -04:00
Arnaud Lacombe d8fc320079 kconfig: annotate non-trivial fall-trough
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
2011-06-06 15:32:10 -04:00
Michal Marek 4c54f0f846 kconfig: Only generate config_is_xxx for bool and tristate options
For strings and integers, the config_is_xxx macros are useless and
sometimes misleading:

  #define CONFIG_INITRAMFS_SOURCE ""
  #define config_is_initramfs_source() 1

Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-25 15:26:25 +02:00
Michal Marek 51f31afd12 Merge branch 'kbuild/kconfig-for-40' into kbuild/kconfig 2011-05-24 17:16:21 +02:00
Arnaud Lacombe bdebd4892e kconfig: do not record timestamp in .config
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-24 16:13:40 +02:00
Jean-Christophe PLAGNIOL-VILLARD de125187dc kconfig: autogenerated config_is_xxx macro
this will allow to use to use

	if(config_is_xxx())
	if(config_is_xxx_module())

in the code instead of

	#ifdef CONFIG_xxx
	#ifdef CONFIG_xxx_MODULE

and now let the compiler remove the non usefull code and not the
pre-processor

as done in the mach-types for arm as exmaple

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-17 15:59:23 +02:00
Michal Marek c33724a438 kconfig: Do not record timestamp in auto.conf and autoconf.h
Timestamps in file data are useless and there is already one in .config

Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-04-18 14:20:38 +02:00
Arnaud Lacombe 579fb8e741 kconfig: fix typos
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-12-15 14:42:11 +01:00
Arnaud Lacombe 0dce631092 kconfig: nuke second argument of conf_write_symbol()
Replacing S_TRISTATE by S_BOOLEAN is a no-op for conf_write_symbol().

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
[mmarek: Fix unused variable warning in conf_write()]
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-12-15 14:26:51 +01:00
Arnaud Lacombe 6e71fabe9e kconfig: do not define AUTOCONF_INCLUDED
AUTOCONF_INCLUDED is not checked is not used within the tree and its parent
header, `autoconf.h', is safe to be re-included.

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-12-15 13:38:25 +01:00
Michal Marek 70c74e59db Merge branch 'message-callback' into kbuild/kconfig
Conflicts:
	scripts/kconfig/nconf.c
2010-10-28 00:54:25 +02:00
Will Newton 1408b15b98 kconfig: Use PATH_MAX instead of 128 for path buffer sizes.
This prevents the buffers being overflowed when using a config
file with a long name. PATH_MAX is used elsewhere in the same
file, so use it here as well.

Signed-off-by: Will Newton <will.newton@imgtec.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-10-04 15:40:04 +02:00
Naohiro Aota 8bea7548ee kconfig: Don't go out from read config loop when you read new symbol
commit 8baefd30b5 of linux-next replaced
a `switch()' statement with some `if()' statements, but left `break's
in the `switch()' statement untouched. This cause read config loop to
exit and so "make oldconfig" is not much usable (see below).

> $ make oldconfig
><snip>
> scripts/kconfig/conf --oldconfig Kconfig
> #
> # using defaults found in /boot/config-2.6.34-ccs-r1
> #
> *
> * Restart config...
> *
> *
> * General setup
> *
> Prompt for development and/or incomplete code/drivers (EXPERIMENTAL) [N/y/?] (NEW)

(I've already have "CONFIG_EXPERIMENTAL=y" in the old config file. But
that's not read here.)

This patch should fix this problem.

Signed-off-by: Naohiro Aota <naota@elisp.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-09-30 21:59:32 +02:00
Arnaud Lacombe 0954828fcb kconfig: replace KERNELVERSION usage by the mainmenu's prompt
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>
2010-09-19 22:53:53 -04:00
Arnaud Lacombe ffb5957bc4 kconfig: allow build-time definition of the internal config prefix
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>
2010-09-19 18:19:26 -04:00
Arnaud Lacombe 8baefd30b5 kconfig: replace a `switch()' statement by a more flexible `if()' statement
With the upcoming dynamical configuration prefix, we can no longer assume that
the prefix will start by a 'C'. As such, we can no longer hardcode this value in
the `case ...:', so replace the `switch() { ... }' statement by a more flexible
'if () { ... }' statement.

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>
2010-09-19 18:19:16 -04:00
Michal Marek 42368c37fb kconfig: Allow frontends to display messages themselves
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-17 10:21:19 +02:00
Arnaud Lacombe 94bedeca77 kbuild: confdata.c explicitly reference errno, thus need <errno.h>
This fixes:
% gmake LKC_GENPARSER=1 menuconfig
[...]
scripts/kconfig/confdata.c:739: error: 'errno' undeclared (first use in this function)
scripts/kconfig/confdata.c:739: error: (Each undeclared identifier is reported only once
scripts/kconfig/confdata.c:739: error: for each function it appears in.)
scripts/kconfig/confdata.c:739: error: 'ENOENT' undeclared (first use in this function)

triggered on NetBSD.

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-17 09:11:38 +02:00
Sam Ravnborg 84062dd3a6 kconfig: fix savedefconfig with choice marked optional
savedefconfig failed to save the correct minimal config
when it encountered a choice marked optional.

Consider following minimal configuration:
$cat Kconfig
choice
	prompt "choice"
	optional

config A
	bool "a"

config B
	bool "b"

endchoice

$cat .config | grep -v ^#
CONFIG_A=y

$conf --savedefconfig=defconfig Kconfig

would before this fix result in an empty file, because
kconfig would assume that CONFIG_A=y is a default value.
But because the choice is optional the default is that
both A and B are =n.

Fix so we handle optional choices correct.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-15 00:32:12 +02:00
Jean Sacren bf5e327a30 kconfig: Fix warning: ignoring return value of 'fwrite'
This fix facilitates fwrite() in both confdata.c and expr.c, either it
succeeds in writing, or an error occurs, or the end of file is reached.

Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-13 00:40:26 +02:00
Sam Ravnborg a64b44ead0 kconfig: fix tristate choice with minimal config
If a minimal config did not specify the value
of all choice values, the resulting configuration
could have wrong values.

Consider following example:
config M
        def_bool y
        option modules
choice
        prompt "choice list"
config A
        tristate "a"
config B
	tristate "b"
endchoice

With a defconfig like this:
CONFIG_M=y
CONFIG_A=y

The resulting configuration would have

    CONFIG_A=m

which was unexpected.

The problem was not not all choice values were set and thus
kconfig calculated a wrong value.

The fix is to set all choice values when we
read a defconfig files.

conf_set_all_new_symbols() is refactored such that
random choice values are now handled by a dedicated function.
And new choice values are set by set_all_choice_values().

This was not the minimal fix, but the fix that resulted
in the most readable code.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reported-by: Arve Hjønnevåg <arve@android.com>
Tested-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-12 10:55:02 +02:00
Sam Ravnborg 801690caf1 kconfig: fix savedefconfig for tristate choices
savedefconfig failed to save choice symbols equal to 'y'
for tristate choices.
This resulted in this value being lost.

In particular is fixes an issue where

	make ARCH=avr32 atngw100_defconfig
	make ARCH=avr32 savedefconfig
	cp defconfig arch/avr32/configs/atngw100_defconfig
	make ARCH=avr32 atngw100_defconfig
	diff -u .config .config.old

failed to produce an identical .config.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-12 10:55:02 +02:00
Sam Ravnborg 7cf3d73b43 kconfig: add savedefconfig
savedefconfig will save a minimal config to a file
named "defconfig".

The config symbols are saved in the same order as
they appear in the menu structure so it should
be possible to map them to the relevant menus
if desired.

The implementation was tested against several minimal
configs for arm which was created using brute-force.

There was one regression related to default numbers
which had their valid range further limited by another symbol.

Sample:

config FOO
	int "foo"
	default 4

config BAR
	int "bar"
	range 0 FOO

If FOO is set to 3 then BAR cannot take a value higher than 3.
But the current implementation will set BAR equal to 4.

This is seldomly used and the final configuration is OK,
and the fix was non-trivial.
So it was documented in the code and left as is.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-03 13:49:32 +02:00
Sam Ravnborg 49192f266f kconfig: code refactoring in confdata.c
Add a a few local functions to avoid some code duplication
No functional changes.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-08-03 13:49:32 +02:00