Added all KERN_ levels in printk found by checkpatch.pl
Signed-off-by: Joe Eloff <kagen101@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In kernel we have hex_asc_hi and hex_asc_lo macroses to do the job.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is rebased version of the patch [1] which was mysteriously not
pushed anywhere but acked.
Here are two methods to convert hex value to binary format. These
certain methods aren't used anywhere in kernel.
[1] http://lkml.org/lkml/2010/2/18/267
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I have cleaned all errors and all bar one warning in chlist.h. The
remaining warning is a line over 80 characters warning. Breaking it
doesnt look all that easy.
Signed-off-by: Neil Munro <neilmunro@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Some delayed initialization is performed in this driver. Make sure
resources that are used during driver clean-up (e.g. during driver's
release() function) are fully initialized before first use. This is
particularly important for the case when the delayed initialization
isn't completed, leaving behind a partially initialized driver.
Such a scenario can occur when RAR is not available on the platform,
and the driver is release()d.
Signed-off-by: Ossama Othman <ossama.othman@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
David S. Miller provided some new ideas and found problems in his review
20100719.212625.255369607.davem@davemloft.net. These issues must be
resolved before it can be merged into net.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix two staging drivers to use module_init()/module_exit()
instead of default init_module() and cleanup_module() function names
so that there are no name conflicts when both are built-in.
drivers/staging/dt3155/built-in.o: In function `cleanup_module':
(.text+0xc0): multiple definition of `cleanup_module'
drivers/staging/batman-adv/built-in.o:(.text+0x330): first defined here
drivers/staging/dt3155/built-in.o: In function `init_module':
(.text+0xe60): multiple definition of `init_module'
drivers/staging/batman-adv/built-in.o:(.text+0x400): first defined here
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
[sven.eckelmann@gmx.de: Mark module init and exit functions as static]
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The receive hook for batman-adv ethernet frames tried to get the last
device which processed the skb before us. It only used that information
to update the rx_bytes and rx_packets stat of that foreign device which
already has updated it using its own receive functions.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Adding support for the Honeywell HMC5843. The interface to the device is
i2c
TODO:
Adding the documentation
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use %p instead of %08x in printk().
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Acked-by: David Brown <davidb@codeaurora.org>
Acked-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
protocol drivers such as BT, FM and GPS when registering
to ST now provide their own private data which they expect
when their functions namely registration completed & receive
are called.
Also upon tty_close, set protos_registered count to 0, although
all protocols are marked un-registered.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
cleanup the code commenting in the headers/structures,
also cleanup few inline commenting in the function
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replace looping on the data buffers and printk-ing by
print_hex_dump.
Also replace most of the pr_info by pr_debug to reduce logging at
default loglevels (7 in our case..)
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
remove custom error code definitions from the header and
make use of the agreed upon linux error codes.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This function is now on par with the latest realtek drivers.
Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
fix for:
drivers/staging/rtl8192su/r8192U_core.c: In function ‘rtl8192SU_MacConfigAfterFwDownload’:
drivers/staging/rtl8192su/r8192U_core.c:4403:24: warning: comparison between ‘rtl819xUsb_loopback_e’ and ‘enum _RTL8192SUSB_LOOPBACK’
drivers/staging/rtl8192su/r8192U_core.c:4405:30: warning: comparison between ‘rtl819xUsb_loopback_e’ and ‘enum _RTL8192SUSB_LOOPBACK’
Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes some coding style issues in adl_pci9111.c from checkpatch.pl
Signed-off-by: Mark Rankilor <reodge@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Lindented, cleared checkpatch findings and simplified error handling.
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replaced custom macro with one from include/linux/if_ether.h.
Also removed MAX_LOOKAHEAD_SIZE as it is not used elsewhere.
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed custom macro with one from include/linux/if_ether.h.
Also removed MIN_DATA_LEN as it is not used elsewhere.
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed custom macro with one from include/linux/if_ether.h.
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed custom macro with one from include/linux/if_ether.h.
FCS is an Ethernet field that holds the CRC value.
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed an always defined macro, perhaps used to patch the driver
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed an always defined macro, perhaps used to patch the driver
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed an always defined macro, perhaps used to patch the driver
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed an always defined macro, perhaps used to patch the driver
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed an always defined macro, perhaps used to patch the driver
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed code guarded by always false definitions.
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The addition of a number to the scan_element names caused
an issue in drivers that used either #define or an enum
to provide the number. Before this fix names like
ADIS16350_ACCEL_X_accel_x_en occur rather than 5_accel_x_en.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We have nice method simple_strtoul() to convert string to numbers which
could be used here.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If error occurs line6_probe() must put interface and usbdev that were
got before.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
All these files use the big kernel lock in a trivial
way to serialize their private file operations,
typically resulting from an earlier semi-automatic
pushdown from VFS.
None of these drivers appears to want to lock against
other code, and they all use the BKL as the top-level
lock in their file operations, meaning that there
is no lock-order inversion problem.
Consequently, we can remove the BKL completely,
replacing it with a per-file mutex in every case.
Using a scripted approach means we can avoid
typos.
file=$1
name=$2
if grep -q lock_kernel ${file} ; then
if grep -q 'include.*linux.mutex.h' ${file} ; then
sed -i '/include.*<linux\/smp_lock.h>/d' ${file}
else
sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file}
fi
sed -i ${file} \
-e "/^#include.*linux.mutex.h/,$ {
1,/^\(static\|int\|long\)/ {
/^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex);
} }" \
-e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \
-e '/[ ]*cycle_kernel_lock();/d'
else
sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \
-e '/cycle_kernel_lock()/d'
fi
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Upsampling from 8000 Hz mono to 32000 Hz stereo improves audio/video
synchronization when userspace programs adopt default buffering. This
is an experimental feature.
Signed-off-by: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
New members of struct easycap take the place of undesirable global variables.
Signed-off-by: Mike Thomas <rmthomas@sciolus.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Instead of passing the minor number and having to look up the fbuffer, just
pass the fbuffer directly to the buffer management code.
Also, to make the code more consistent, change the push_empty() call so
that the fbuffer is passed as the first parameter.
Prototype the printques routine to avoid having to declare it as extern.
Cleanup some of the comments in dt3155_isr.h.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
RET_OK is 0 and RET_FAIL is a -1, replace these custom returns with
a standard errno
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
use readl, writel to get and set the register instead.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
std.h introduces _TI_ _FLOAT_ _FIXED_ _TARGET_ ARG_TO_INT ARG_TO_PTR
which are no longer being used anywhere. we dont really need the
custom std.h header. remove it from the repo. where we need types,
introduce standard types.h
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
kernel has it's own NULL define, we dont need to introduce our own
custom NULL type!
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
bool has standard true and false, we dont need to introduce
our own TRUE and FALSE macros.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch renames the variables in the parameter lists and in the function
definitions to make them match.
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
validBit to valid_bit
victimEntryNum to victim_entry_num
virtualAddr to virtual_addr
xType to xtype
actualValue to actual_value
EASIL1_MMUMMU_IRQSTATUSReadRegister32 to easil1_mmummu_irqstatus_read_register32
EASIL1_MMUMMU_LOCKBaseValueWrite32 to easil1_mmummu_lock_base_value_write32
easiNum to easi_num
expectedValue to expected_value
invalidValue to invalid_value
L1_base to l1_base
L2_base to l2_base
lower16Bits to lower16_bits
lower8Bits to lower8_bits
lowerMiddle8Bits to lower_middle8_bits
lowerUpper8Bits to lower_upper8_bits
maxValidValue to max_valid_value
minValidValue to min_valid_value
newValue to new_value
returnCodeIfMismatch to return_code_if_mismatch
spyCodeIfMisMatch to spy_code_if_mis_match
upper16Bits to upper16_bits
upper8Bits to upper8_bits
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
ulBrdState to brd_state
ulChnl to chnl
ulDspAddr to dsp_add
ulDspDestAddr to dsp_dest_addr
ulDspLoadAddr to dsp_load_addr
ulDspRunAddr to dsp_run_addr
ulDspSrcAddr to dsp_src_addr
ulMapAttrs to map_attr
ulMemType to mem_type
ulRMSFxn to rms_fxn
ulStatus to ret
ulVirtAddr to virt_addr
uNumDesc to num_desc
uNumToDSP to num_to_dsp
uPaSize to pa_size
uPhase to phase
uSegId to segm_id
uStream1 to stream1
uStream2 to stream2
uZId to zid
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
segmentId to segmnt_id
SetPageDirty to set_page_dirty
sizeInBytes to size_in_bytes
sleepCode to sleep_code
Status to status
symName to sym_name
szVar to sz_var
Trapped_Args to trapped_args
TTBPhysAddr to ttb_phys_addr
uChirps to chirps
uChnlId to ch_id
uChnlID to ch_id
uContentSize to cont_size
uDDMAChnlId to ddma_chnl_id
uEvents to events
ulAlign to align_mask
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
puLen to len
pulEntry to entry_pt
pulFxnAddr to fxn_addr
pulId to chan_id
pulSegId to sgmt_id
pVaBuf to va_buf
pVirtualAddress to virtual_address
pwMbVal to mbx_val
pWord to word
pXlatorAttrs to xlator_attrs
registerFxn to register_fxn
rootPersistent to root_prstnt
sectionData to section_data
sectionInfo to section_info
sectionName to section_name
sectName to sec_name
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
pstrFxn to str_fxn
pstrLibName to str_lib_name
pstrSect to str_sect
pstrSym to str_sym
pstrZLFileName to str_zl_file_name
pstrZLFile to str_zl_file
pszCoffPath to sz_coff_path
pszMode to sz_mode
pszName to sz_name
pszSectName to sz_sect_name
pszUuid to sz_uuid
pszZlDllName to sz_zl_dll_name
puAddr to addr
pulAddr to addr
pulBufSize to buff_size
pulBytes to nbytes
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
pPhysAddr to phys_addr
pPhysicalAddress to physical_address
ppIntfFxns to if_fxns
pProcLoadStat to proc_load_stat
pProcStat to proc_lstat
ppSym to sym_val
pRefData to ref_data
pRef to ref
preservedBit to preserved_bit
pResult to result
procID to proc_id
pSectInfo to sect_inf
pSrc to src
pstrContent to str_content
pstrDummyFile to str_dummy_file
pstrExecFile to str_exec_file
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
pMemStatBuf to mem_stat_buf
pMgrAttrs to mgr_attrts
pMgrInfo to mgr_info
pNodeEnv to node_env
pNodeId to node_uuid
pNodeInfo to node_info
pNumLibs to num_libs
pNumPersLibs to num_pers_libs
pObjDef to obj_def
pObjUuid to obj_uuid
poolPhysBase to pool_phys_base
poolSize to pool_size
pPctxt to pctxt
ppDevContext to dev_cntxt
ppDrvInterface to drv_intf
pPersistentDepLibs to prstnt_dep_libs
pPhyAddr to phy_addr
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
phNldrObj to nldr_ovlyobj
phNldr to nldr
phNodeMgr to node_man
pHostBuf to host_buf
pHostConfig to host_config
phRmmMgr to rmm_mgr
phStrmMgr to strm_man
phStrm to strm_objct
phXlator to xlator
physicalAddr to physical_addr
pInfo to channel_info
pIOC to chan_ioc
pLib to lib_obj
pList to lst
pMemBuf to mem_buf
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
phDevContext to device_ctx
phDevNode to dev_nde
phDevObject to device_obj
phDispObject to dispatch_obj
phDmmMgr to dmm_manager
phDrvObject to drv_obj
phDRVObject to drv_obj
phIOMgr to io_man
phLoader to loader
phManager to manager
phMgrObject to mgr_obj
phMgr to mgr
phMsgMgr to msg_man
phMsgQueue to msgq
phNldrNode to nldr_nodeobj
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
pdwSize to buff_size
pdwState to board_state
pdwValue to value
pdwVersion to version
pElemExisting to elem_existing
pEntry to entry
pExists to exists
pfEnablePerf to enable_perf
pGenObj to gen_obj
phChnlMgr to channel_mgr
phChnl to chnl
phCodMgr to cod_mgr
phDCDHandle to dcd_handle
phDcdMgr to dcd_mgr
phDehMgr to deh_manager
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
pArb to arb
pbAlreadyAttached to already_attached
pBaseAddr to base_addr
pbHostBuf to host_buff
pBufVa to buf_va
pChnlInfo to channel_info
pConfig to config_param
pContent to content
pContext to context
pdcdProps to dcd_prop
pDepLibUuids to dep_lib_uuids
pDevNodeString to dev_node_strg
pDispAttrs to disp_attrs
pDsp to dsp
pdwAutoStart to auto_start
pdwChnl to chnl
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
hStrm to stream_obj
iMode to io_mode
irqMask to irq_mask
lOffset to offset
memPtr to mem_ptr
moduleId to module_id
msgCallback to msg_callback
msgList to msg_list
nArgc to num_argc
nEntryStart to entry_start
nMemSpace to mem_space
nStatus to node_status
nStrms to strms
numLibs to num_libs
numLockedEntries to num_locked_entries
pageSize to page_sz
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
hDevContext to dev_ctxt
hDevExtension to dev_extension
hdevObject to device_obj
hDispObject to disp_obj
hDrVObject to driver_obj
hDRVObject to driver_obj
hMGRHandle to mgr_handle
hNldrObject to nldr
hNode1 to node1
hNode2 to node2
hNodeRes to node_resource
hPCtxt to process_ctxt
hProc to proc
hStreamHandle to stream_handle
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
dspAddr to dsp_address
dspAdr to dsp_adr
dspBaseVirt to dsp_base_virt
dwDeviceContext to device_context
dwDSPAddrOffset to dsp_addr_offset
dwDSPAddr to dsp_addr
dwErrInfo to error_info
dwGPPBaseBA to gpp_base_ba
dwMask to mask
dwTimeout to timeout
dwTimeOut to timeout
dwValue to value
entryNum to entry_num
execFile to exec_file
fFlush to flush_data
FlushMemType to flush_mem_type
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fix a compilation error in uuid_hex_to_bin
due to the patch "simplify and clean up"
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
pavel@suse.cz no longer works, replace it with working address.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The phy_mii_ioctl() function unnecessarily throws away the original ifreq.
We need access to the ifreq in order to support PHYs that can perform
hardware time stamping.
Two maverick drivers filter the ioctl commands passed to phy_mii_ioctl().
This is unnecessary since phylib will check the command in any case.
Signed-off-by: Richard Cochran <richard.cochran@omicron.at>
Signed-off-by: David S. Miller <davem@davemloft.net>
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
aAddr to addrs
aArgs to args
aSize to len
baseAddress to base_address
bDynamicLoad to dynamic_load
bForce to force
cCharSize to char_size
cContentSize to content_size
cCount to count
cDspCharSize to dsp_char_size
cIndex to index
ClkId to clock_id
cOrigin to origin
dataBasePhys to data_base_phys
dcdObjUnion to dcd_obj
deviceContext to device_ctxt
========================================
Signed-off-by: Rene Sapiens <rene.sapiens@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds the needed Kconfig and Makefile changes to add
the quickstart driver to the build.
Cc: Angelo Arrifano <miknix@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch is a clocksource implementation suitable for guests hosted on
HyperV. Time keeping in Linux guests hosted on HyperV is unstable. This
clocksource driver fixes the problem. This driver uses the hyperv
detection code integrated into the kernel.
Signed-off-by: K. Y. Srinivasan <ksrinivasan@novell.com>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Several solo drivers need <linux/delay.h>, so add it to the
private solo6010.h header file.
drivers/staging/solo6x10/solo6010-core.c:191: error: implicit declaration of function 'mdelay'
drivers/staging/solo6x10/solo6010-tw28.c:181: error: implicit declaration of function 'msleep_interruptible'
drivers/staging/solo6x10/solo6010-gpio.c:78: error: implicit declaration of function 'udelay'
drivers/staging/solo6x10/solo6010-v4l2-enc.c:254: error: implicit declaration of function 'mdelay'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
This patch prevents the code from calling parport_release and
parport_unregister_device twice with the same arguments - and thus fixes an oops.
Rationale:
After the first call the parport is already released and the
handle isn't valid anymore and calling parport_release and
parport_unregister_device twice isn't a good idea.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Cc: stable <stable@kernel.org>
Acked-by: Willy Tarreau <w@1wt.eu>
There is recently added hex_to_bin() kernel's method which we could use
instead of custom long function.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Obviously nobody was using DSP_TRACEBUF_DISABLED, since it wasn't even
standarized between TRACEBUF and TRACE_BUF.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We only use it to pass the MMU fault address.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
All this code is just to print the stack, so make it clearer.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We don't want the DSP to continue writing into other mapped pages, no
matter how unlikely.
Based on extensive discussion with Fernando Guzman Lugo.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
So that it can be used in more than one place.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There's no need to keep it around. DSP should stop trying to access
system memory.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The old history (before git) had these two character ids that never
stood any chance to identify anybody.
Nobody from that list was moved to the good list of contributors, so
let's get rid of it.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We had a request to enable one of the realtek network drivers in staging in Fedora.
After a quick lookover, I decided this wasn't such a great idea.
In doing so though, I noticed we have 6 copies of ieee80211.h there now,
Two drivers even have two copies of it. (Even worse, cleanups have been pointlessly
happening to both files). The patch below removes one of them, which is asides
from whitespace, identical afaics. With a change of filename to the #include,
it all still compiles for me.
A better fix would be to remove both, and have them use the core ieee80211 stuff,
but this is at least a tiny step in the right direction.
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fixed the single two warnings in ap.h which left this file with nothing left to clean.
Signed-off-by: Neil Munro <neilmunro@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch makes error handling more readable due to 'goto err' pattern.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Cc: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch makes error handling more readable due to 'goto err' pattern.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Cc: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch cleans up some style issues in dmm32at.c as found by checkpatch.pl
Signed-off-by: Mark Rankilor <reodge@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch cleans up some issues discovered by checkpatch.pl
Signed-off-by: Mark Rankilor <reodge@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the kcomedilib_main.c file that fixes up some printk() warning issues.
Signed-off-by: Gustavo Silva <silvagustavo@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the ni_labpc.c file that fixes up 80 character warnings found by the checkpatch.pl tool
Signed-off-by: Maurice Dawson <mauricedawson2699@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A broadcast address is also a multicast address so simplify test cases where
possible.
As suggested by Joe Perches.
Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed an always defined macro, perhaps used to patch the driver
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed an always defined macro, perhaps used to patch the driver
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed custom definition not used elsewhere, is_zero_ether_addr()
is already provided if required.
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now that dt3155_drv.c is not dependent on the global symbol
dt3155_fbuffer[], declared in dt3155_isr.c, remove it.
This also fixes many of the coding style problems in dt3155_isr.c.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove the remaining global 32-bit and 8-bit i2c registers. Create a
local variable of the correct type where they are needed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The "depends on" line was inadvertently omitted from the inaugural patch.
Signed-off-by: Mike Thomas <rmthomas@sciolus.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the ioctl.c file that fixes up the following
issues:
ERROR: that open brace { should be on the previous line x 3
WARNING: please, no space before tabs x 1
ERROR: space required before the open parenthesis '(' x 5
WARNING: braces {} are not necessary for single statement blocks x 2
ERROR: space prohibited after that '!' (ctx:BxW) x 1
WARNING: suspect code indent for conditional statements x 2
ERROR: do not use C99 // comments x 1
WARNING: braces {} are not necessary for any arm of this statement x 4
Signed-off-by: Gustavo Silva <silvagustavo@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Providing a context which can be passed around the driver, the KIM's platform
driver's struct device to be used to dev_set_drvdata and dev_get_drvdata.
The ST core's data is passed around using tty's disc_data and in other
cases the ST KIM's platform device is exposed from the board-XX.c which
adds KIM platform device whose dev is used.
Thereby remove the need for the global reference struct kim_data_s *kim_gdata;
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
An important TODO was to remove global references in TI-ST driver,
thereby providing a context to the driver.
This should also serve as a small step in removal of the single device
limit.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Right now, there is no easy/intuitive way to find out whether a node
might have vanished. This commit adds the time when a node was last seen
to the originator table output, so that a common user is able to tell
whether a node might have gone without having to wait PURGE_TIMEOUT
seconds until that node gets "garbe-collected".
It also puts the the versioning information in an extra line, as
the first one of this debug output would otherwise get too long.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Each general printk which is not informative by itself for a specific
batX device were moved to pr_(info|warning|err) as it provides an easy
interface which for example resolves the problem to add the prefix
"batman-adv: " before each line.
All information which is specific to a batX device will be printed using
a bat_(info|err|warning) macro to prefix it also with "batman-adv:
batX:" in each line.
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
All routing debug messages are saved in a ring buffer that can be
read via the debugfs file "log".
Note that CONFIG_BATMAN_ADV_DEBUG must be activated to have the
debug logs compiled in.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It is not need to depend on it as procfs support was removed during the
transition to sysfs.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We must use the user supplied information about how the code should be
compiled instead of always trying to build it as module.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The debugfs files are initialized at load time only but would get
deinitialized when the module changed in it deactivate (sleeping)
state. As a consequence the debugfs files are not accessible
anymore.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We include different header files indirectly to the same source file.
This creates weird compiler errors from time to time. Include guards
should prefend that functions/variables/... gets redefined by itself.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The new versioning scheme looks like this:
* the trunk will simply be named "devel" followed by a revision number
* the upcoming release branch will be "maint" followed by a revision
number
* the releases will carry their respective names (e.g. 2010.0.0)
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It is enough for our timeouts to keep them in seconds instead of miliseconds.
With a too high resolution, we might even risk an integer overflow, so this
patch should make things more safe.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
With the current default values, this patch is not critical, as
LOCAL_HNA_TIMEOUT is a multiple of 1000 anyway. However, if someone
would like to change this #define, the person could have some
unexpected rounding issues. Therefore doing the multiplication before
the division now.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Useless but meaningfull patch that converts JavaStyle names into c_style
Signed-off-by: Antonio Quartulli <ordex@ritirata.org>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There is a small possibility that a reader gets incorrect values on 32
bit arches. SNMP applications could catch incorrect counters when a
32bit high part is changed by another stats consumer/provider.
One way to solve this is to add a rtnl_link_stats64 param to all
ndo_get_stats64() methods, and also add such a parameter to
dev_get_stats().
Rule is that we are not allowed to use dev->stats64 as a temporary
storage for 64bit stats, but a caller provided area (usually on stack)
Old drivers (only providing get_stats() method) need no changes.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add another device ID as listed in the vendor driver version
0003.0825.2009.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There are only 6 elements in the cb_pcidda_boards[] array so the
original code read past the end. After this change nothing uses N_BOARDS
so I removed the definition.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds some device ids.
The list of supported devices was extracted from realteks driver package.
(0x050d, 0x815F) and (0x0df6, 0x004b) are not in the official list of
supported devices and may not work correctly.
In case of problems with these, they should probably be removed from the list.
Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In commit bbfb5652, the spacing in the definitions of eqMacAddr and cpMacAddr
in drivers/staging/rtl8187se/r8180_core.c were changed to conform to kernel
standards. These definitions were duplicates of lines found in
drivers/staging/rtl8187se/ieee80211/dot11d.h. Once the change was made, the
following warnings were emitted:
CC [M] drivers/staging/rtl8187se/r8180_core.o
drivers/staging/rtl8187se/r8180_core.c:69:0: warning: "eqMacAddr" redefined
drivers/staging/rtl8187se/ieee80211/dot11d.h:39:0: note: this is the location of the previous definition
drivers/staging/rtl8187se/r8180_core.c:70:0: warning: "cpMacAddr" redefined
drivers/staging/rtl8187se/ieee80211/dot11d.h:40:0: note: this is the location of the previous definition
The fix is to keep only the difinition in the header file.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I got a wlags49_h2 driver build error in linux-next when CONFIG_SYSFS is not set.
CC [M] drivers/staging/wlags49_h2/wl_cs.o
In file included from drivers/staging/wlags49_h2/wl_cs.c:104:
drivers/staging/wlags49_h2/wl_sysfs.h: In function ‘register_wlags_sysfs’:
drivers/staging/wlags49_h2/wl_sysfs.h:5: error: parameter name omitted
drivers/staging/wlags49_h2/wl_sysfs.h: In function ‘unregister_wlags_sysfs’:
drivers/staging/wlags49_h2/wl_sysfs.h:6: error: parameter name omitted
make[1]: *** [drivers/staging/wlags49_h2/wl_cs.o] Error 1
make: *** [_module_drivers/staging/wlags49_h2] Error 2
This is due a wrong function definition (it does not include parameters names).
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
On ia64, the build fails with incompatible implicit definition of strlen.
This patch adds the <linux/string.h> include to get the real prototype.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There is a possible race condition when hv_utils starts to load immediately
after hv_vmbus is loading - null pointer error could happen.
This patch added wait/completion to ensure all channels are ready before
vmbus loading completes. So another module won't have any uninitialized channel.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I received a report that AI streaming acquisitions do not work properly
for the adl_pci9111 driver when convert_src is TRIG_TIMER and
scan_begin_src is TRIG_FOLLOW (and scan_begin_arg is therefore 0). This
seems to be down to the incorrect setting of dev_private->scan_delay in
pci9111_ai_do_cmd(). Under the previously stated conditions,
dev_private->scan_delay ends up set to (unsigned int)-1, but it ought to
be set to 0. The function sets it to 0 initially, and it only makes
sense to change it if both convert_src and scan_begin_src are set to
TRIG_TIMER.
Note: 'scan_delay' is the number of unwanted scans to discard after each
valid scan. The hardware does not support 'scan' timing as such, just a
regularly paced conversion timer (with automatic channel switching
between conversions). The driver simulates a scan period that is some
(>1) multiple of the conversion period times the scan length
(chanlist_len samples) by reading chanlist_len samples and discarding
the next scan_delay times chanlist_len samples.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I moved the kfree() down a couple lines after the dereference.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In today linux-next I got a compile warning in staging/batman-adv.
This is due a struct bin_attribute read function prototype change and the driver was not updated.
This patch solves the issue
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
copy_to_user() returns the number of bites remaining but we want to
return a negative error code here.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Implicit slab.h inclusion via percpu.h is about to go away. Make sure
gfp.h or slab.h is included as necessary.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
All of the board 32-bit registers and 8-bit i2c registers are either read before
writing to them or they are just written to with a new value. There is no reason
to keep a 'local' copy of any of them.
As a first step to removing them, get rid of all the ones that are not used in
the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Where used, dereference the global symbol dt3155_status[] as a local
pointer. This improves the readability of the code and reduces the
overall length of some of the really long lines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix 56 undefined references to snd_*() functions. First 5 are:
drivers/built-in.o: In function `solo_g723_exit':
(.text+0xa4a4aa): undefined reference to `snd_card_free'
drivers/built-in.o: In function `solo_snd_pcm_init':
solo6010-g723.c:(.text+0xa4a677): undefined reference to `snd_pcm_new'
solo6010-g723.c:(.text+0xa4a6b1): undefined reference to `snd_pcm_set_ops'
solo6010-g723.c:(.text+0xa4a74d): undefined reference to `snd_pcm_lib_preallocate_pages_for_all'
drivers/built-in.o: In function `solo_g723_init':
(.text+0xa4a7f6): undefined reference to `snd_card_create'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Ben Collins <bcollins@bluecherry.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The spectra driver doesn't compile with today linux-next
The problem is that it tries to use a blk_fs_request macro. Searching
for this macro I saw that it used to exist in linux/blkdev.h as
#define blk_fs_request(rq) ((rq)->cmd_type == REQ_TYPE_FS)
This patch solves the issue eliminating the unnecessary (and now inexistent) wrapper
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes up many coding style issues in adv_pci_dio.c found by
checkpatch.pl
Signed-off-by: Mark Rankilor <reodge@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replace all occurrences with unsigned char type.
Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replace all occurrences with unsigned short type.
Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replace all occurrences with unsigned long type, except for pointer fields that
should be u32 in packed structures and 8-byte-aligned 8 byte long structure
QWORD.
Thanks to Jiri Slaby for pointing out that simply replacing by unsigned long is
wrong on x86-64 arch.
Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The global symbol dt3155_fbuffer[], declared in dt3155_isr.c, is really
just a pointer to dt3155_status[].fbuffer. To improve readability, make
some of the really long lines shorter, and make the buffer access more
consistent, use &dt3155_status[].fbuffer to access the buffer structure.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/built-in.o: In function `wlan_free_wiphy':
(.text+0x3f5eb5): undefined reference to `wiphy_unregister'
drivers/built-in.o: In function `wlan_free_wiphy':
(.text+0x3f5ec4): undefined reference to `wiphy_free'
drivers/built-in.o: In function `wlan_create_wiphy':
(.text+0x3f5f76): undefined reference to `wiphy_new'
drivers/built-in.o: In function `wlan_create_wiphy':
(.text+0x3f6024): undefined reference to `wiphy_register'
drivers/built-in.o: In function `prism2_roamed':
(.text+0x3f61f7): undefined reference to `cfg80211_roamed'
drivers/built-in.o: In function `prism2_disconnected':
(.text+0x3f6223): undefined reference to `cfg80211_disconnected'
drivers/built-in.o: In function `prism2_connect_result':
(.text+0x3f626d): undefined reference to `cfg80211_connect_result'
drivers/built-in.o: In function `prism2_connect':
(.text+0x3f62b6): undefined reference to `ieee80211_frequency_to_channel'
drivers/built-in.o: In function `prism2_scan':
(.text+0x3f6679): undefined reference to `ieee80211_frequency_to_channel'
drivers/built-in.o: In function `prism2_scan':
(.text+0x3f6873): undefined reference to `__ieee80211_get_channel'
drivers/built-in.o: In function `prism2_scan':
(.text+0x3f68cc): undefined reference to `cfg80211_inform_bss'
drivers/built-in.o: In function `prism2_scan':
(.text+0x3f6942): undefined reference to `cfg80211_scan_done'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix 49 zram build errors in one swoop. Examples:
drivers/staging/zram/zram_drv.c:225: error: dereferencing pointer to incomplete type
drivers/staging/zram/zram_drv.c:226: error: implicit declaration of function 'bio_for_each_segment'
drivers/staging/zram/zram_drv.c:226: error: expected ';' before '{' token
drivers/staging/zram/zram_drv.c:281: error: implicit declaration of function 'bio_endio'
drivers/staging/zram/zram_drv.c:285: error: implicit declaration of function 'bio_io_error'
drivers/staging/zram/zram_drv.c:545: error: implicit declaration of function 'set_capacity'
drivers/staging/zram/zram_drv.c:548: error: implicit declaration of function 'queue_flag_set_unlocked'
drivers/staging/zram/zram_drv.c:548: error: 'QUEUE_FLAG_NONROT' undeclared (first use in this function)
drivers/staging/zram/zram_drv.c:548: error: dereferencing pointer to incomplete type
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Code cleanup, removed custom macro to compare Ethernet addresses.
Some checkpatch warnings on indentation were not resolved.
The return value of compare_ether_addr was reversed, something to consider.
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add Kconfig + Makefile for TI's DSP Bridge driver
and expose it to the staging menu.
For now, have tidspbridge depend on ARCH_OMAP3.
That dependency should be relaxed as soon as required cleanups are applied.
Signed-off-by: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: Kanigeri, Hari <h-kanigeri2@ti.com>
Signed-off-by: Ameya Palande <ameya.palande@nokia.com>
Signed-off-by: Guzman Lugo, Fernando <fernando.lugo@ti.com>
Signed-off-by: Hebbar, Shivananda <x0hebbar@ti.com>
Signed-off-by: Ramos Falcon, Ernesto <ernesto@ti.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Anna, Suman <s-anna@ti.com>
Signed-off-by: Gupta, Ramesh <grgupta@ti.com>
Signed-off-by: Gomez Castellanos, Ivan <ivan.gomez@ti.com>
Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Signed-off-by: Armando Uribe De Leon <x0095078@ti.com>
Signed-off-by: Deepak Chitriki <deepak.chitriki@ti.com>
Signed-off-by: Menon, Nishanth <nm@ti.com>
Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Menon, Nishanth
Joe Eloff
Andy Shevchenko
Edgardo Hames
Neil Munro
Kulikov Vasiliy
Wu Zhangjin
Ossama Othman
Sven Eckelmann
Randy Dunlap
Shubhrajyoti D
Pavan Savoy
Florian Schilhabel
Mark
Andres More
Jonathan Cameron
Barry Song
Arnd Bergmann
Mike Thomas
Denis Kirjanov
H Hartley Sweeten
Rene Sapiens
Pavel Machek
Richard Cochran
Greg Kroah-Hartman
Angelo Arrifano
Ky Srinivasan
Uwe Kleine-König
Peter Huewe
Felipe Contreras
Dave Jones
Gustavo Silva
Maurice Dawson
Charles Clément
Linus Lüssing
Marek Lindner
Simon Wunderlich
Antonio Quartulli
Eric Dumazet
Linus Torvalds
Ben Hutchings
Ozan Çağlayan
Dan Carpenter
Larry Finger
Javier Martinez Canillas
Jeff Mahoney
Haiyang Zhang
Ian Abbott
Himanshu Chauhan
Tejun Heo
Omar Ramirez Luna
Ohad Ben-Cohen