Commit Graph

233 Commits

Author SHA1 Message Date
Robin Murphy 5deb67f77a libnvdimm, nd_blk: remove mmio_flush_range()
mmio_flush_range() suffers from a lack of clearly-defined semantics,
and is somewhat ambiguous to port to other architectures where the
scope of the writeback implied by "flush" and ordering might matter,
but MMIO would tend to imply non-cacheable anyway. Per the rationale
in 67a3e8fe90 ("nd_blk: change aperture mapping from WC to WB"), the
only existing use is actually to invalidate clean cache lines for
ARCH_MEMREMAP_PMEM type mappings *without* writeback. Since the recent
cleanup of the pmem API, that also now happens to be the exact purpose
of arch_invalidate_pmem(), which would be a far more well-defined tool
for the job.

Rather than risk potentially inconsistent implementations of
mmio_flush_range() for the sake of one callsite, streamline things by
removing it entirely and instead move the ARCH_MEMREMAP_PMEM related
definitions up to the libnvdimm level, so they can be shared by NFIT
as well. This allows NFIT to be enabled for arm64.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-08-31 15:05:10 -07:00
Nick Terrell 73f3d1b48f lib: Add zstd modules
Add zstd compression and decompression kernel modules.
zstd offers a wide varity of compression speed and quality trade-offs.
It can compress at speeds approaching lz4, and quality approaching lzma.
zstd decompressions at speeds more than twice as fast as zlib, and
decompression speed remains roughly the same across all compression levels.

The code was ported from the upstream zstd source repository. The
`linux/zstd.h` header was modified to match linux kernel style.
The cross-platform and allocation code was stripped out. Instead zstd
requires the caller to pass a preallocated workspace. The source files
were clang-formatted [1] to match the Linux Kernel style as much as
possible. Otherwise, the code was unmodified. We would like to avoid
as much further manual modification to the source code as possible, so it
will be easier to keep the kernel zstd up to date.

I benchmarked zstd compression as a special character device. I ran zstd
and zlib compression at several levels, as well as performing no
compression, which measure the time spent copying the data to kernel space.
Data is passed to the compresser 4096 B at a time. The benchmark file is
located in the upstream zstd source repository under
`contrib/linux-kernel/zstd_compress_test.c` [2].

I ran the benchmarks on a Ubuntu 14.04 VM with 2 cores and 4 GiB of RAM.
The VM is running on a MacBook Pro with a 3.1 GHz Intel Core i7 processor,
16 GB of RAM, and a SSD. I benchmarked using `silesia.tar` [3], which is
211,988,480 B large. Run the following commands for the benchmark:

    sudo modprobe zstd_compress_test
    sudo mknod zstd_compress_test c 245 0
    sudo cp silesia.tar zstd_compress_test

The time is reported by the time of the userland `cp`.
The MB/s is computed with

    1,536,217,008 B / time(buffer size, hash)

which includes the time to copy from userland.
The Adjusted MB/s is computed with

    1,536,217,088 B / (time(buffer size, hash) - time(buffer size, none)).

The memory reported is the amount of memory the compressor requests.

| Method   | Size (B) | Time (s) | Ratio | MB/s    | Adj MB/s | Mem (MB) |
|----------|----------|----------|-------|---------|----------|----------|
| none     | 11988480 |    0.100 |     1 | 2119.88 |        - |        - |
| zstd -1  | 73645762 |    1.044 | 2.878 |  203.05 |   224.56 |     1.23 |
| zstd -3  | 66988878 |    1.761 | 3.165 |  120.38 |   127.63 |     2.47 |
| zstd -5  | 65001259 |    2.563 | 3.261 |   82.71 |    86.07 |     2.86 |
| zstd -10 | 60165346 |   13.242 | 3.523 |   16.01 |    16.13 |    13.22 |
| zstd -15 | 58009756 |   47.601 | 3.654 |    4.45 |     4.46 |    21.61 |
| zstd -19 | 54014593 |  102.835 | 3.925 |    2.06 |     2.06 |    60.15 |
| zlib -1  | 77260026 |    2.895 | 2.744 |   73.23 |    75.85 |     0.27 |
| zlib -3  | 72972206 |    4.116 | 2.905 |   51.50 |    52.79 |     0.27 |
| zlib -6  | 68190360 |    9.633 | 3.109 |   22.01 |    22.24 |     0.27 |
| zlib -9  | 67613382 |   22.554 | 3.135 |    9.40 |     9.44 |     0.27 |

I benchmarked zstd decompression using the same method on the same machine.
The benchmark file is located in the upstream zstd repo under
`contrib/linux-kernel/zstd_decompress_test.c` [4]. The memory reported is
the amount of memory required to decompress data compressed with the given
compression level. If you know the maximum size of your input, you can
reduce the memory usage of decompression irrespective of the compression
level.

| Method   | Time (s) | MB/s    | Adjusted MB/s | Memory (MB) |
|----------|----------|---------|---------------|-------------|
| none     |    0.025 | 8479.54 |             - |           - |
| zstd -1  |    0.358 |  592.15 |        636.60 |        0.84 |
| zstd -3  |    0.396 |  535.32 |        571.40 |        1.46 |
| zstd -5  |    0.396 |  535.32 |        571.40 |        1.46 |
| zstd -10 |    0.374 |  566.81 |        607.42 |        2.51 |
| zstd -15 |    0.379 |  559.34 |        598.84 |        4.61 |
| zstd -19 |    0.412 |  514.54 |        547.77 |        8.80 |
| zlib -1  |    0.940 |  225.52 |        231.68 |        0.04 |
| zlib -3  |    0.883 |  240.08 |        247.07 |        0.04 |
| zlib -6  |    0.844 |  251.17 |        258.84 |        0.04 |
| zlib -9  |    0.837 |  253.27 |        287.64 |        0.04 |

Tested in userland using the test-suite in the zstd repo under
`contrib/linux-kernel/test/UserlandTest.cpp` [5] by mocking the kernel
functions. Fuzz tested using libfuzzer [6] with the fuzz harnesses under
`contrib/linux-kernel/test/{RoundTripCrash.c,DecompressCrash.c}` [7] [8]
with ASAN, UBSAN, and MSAN. Additionaly, it was tested while testing the
BtrFS and SquashFS patches coming next.

[1] https://clang.llvm.org/docs/ClangFormat.html
[2] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/zstd_compress_test.c
[3] http://sun.aei.polsl.pl/~sdeor/index.php?page=silesia
[4] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/zstd_decompress_test.c
[5] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/test/UserlandTest.cpp
[6] http://llvm.org/docs/LibFuzzer.html
[7] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/test/RoundTripCrash.c
[8] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/test/DecompressCrash.c

zstd source repository: https://github.com/facebook/zstd

Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
2017-08-15 09:02:08 -07:00
Nick Terrell 5d2405227a lib: Add xxhash module
Adds xxhash kernel module with xxh32 and xxh64 hashes. xxhash is an
extremely fast non-cryptographic hash algorithm for checksumming.
The zstd compression and decompression modules added in the next patch
require xxhash. I extracted it out from zstd since it is useful on its
own. I copied the code from the upstream XXHash source repository and
translated it into kernel style. I ran benchmarks and tests in the kernel
and tests in userland.

I benchmarked xxhash as a special character device. I ran in four modes,
no-op, xxh32, xxh64, and crc32. The no-op mode simply copies the data to
kernel space and ignores it. The xxh32, xxh64, and crc32 modes compute
hashes on the copied data. I also ran it with four different buffer sizes.
The benchmark file is located in the upstream zstd source repository under
`contrib/linux-kernel/xxhash_test.c` [1].

I ran the benchmarks on a Ubuntu 14.04 VM with 2 cores and 4 GiB of RAM.
The VM is running on a MacBook Pro with a 3.1 GHz Intel Core i7 processor,
16 GB of RAM, and a SSD. I benchmarked using the file `filesystem.squashfs`
from `ubuntu-16.10-desktop-amd64.iso`, which is 1,536,217,088 B large.
Run the following commands for the benchmark:

    modprobe xxhash_test
    mknod xxhash_test c 245 0
    time cp filesystem.squashfs xxhash_test

The time is reported by the time of the userland `cp`.
The GB/s is computed with

    1,536,217,008 B / time(buffer size, hash)

which includes the time to copy from userland.
The Normalized GB/s is computed with

    1,536,217,088 B / (time(buffer size, hash) - time(buffer size, none)).

| Buffer Size (B) | Hash  | Time (s) | GB/s | Adjusted GB/s |
|-----------------|-------|----------|------|---------------|
|            1024 | none  |    0.408 | 3.77 |             - |
|            1024 | xxh32 |    0.649 | 2.37 |          6.37 |
|            1024 | xxh64 |    0.542 | 2.83 |         11.46 |
|            1024 | crc32 |    1.290 | 1.19 |          1.74 |
|            4096 | none  |    0.380 | 4.04 |             - |
|            4096 | xxh32 |    0.645 | 2.38 |          5.79 |
|            4096 | xxh64 |    0.500 | 3.07 |         12.80 |
|            4096 | crc32 |    1.168 | 1.32 |          1.95 |
|            8192 | none  |    0.351 | 4.38 |             - |
|            8192 | xxh32 |    0.614 | 2.50 |          5.84 |
|            8192 | xxh64 |    0.464 | 3.31 |         13.60 |
|            8192 | crc32 |    1.163 | 1.32 |          1.89 |
|           16384 | none  |    0.346 | 4.43 |             - |
|           16384 | xxh32 |    0.590 | 2.60 |          6.30 |
|           16384 | xxh64 |    0.466 | 3.30 |         12.80 |
|           16384 | crc32 |    1.183 | 1.30 |          1.84 |

Tested in userland using the test-suite in the zstd repo under
`contrib/linux-kernel/test/XXHashUserlandTest.cpp` [2] by mocking the
kernel functions. A line in each branch of every function in `xxhash.c`
was commented out to ensure that the test-suite fails. Additionally
tested while testing zstd and with SMHasher [3].

[1] https://phabricator.intern.facebook.com/P57526246
[2] https://github.com/facebook/zstd/blob/dev/contrib/linux-kernel/test/XXHashUserlandTest.cpp
[3] https://github.com/aappleby/smhasher

zstd source repository: https://github.com/facebook/zstd
XXHash source repository: https://github.com/cyan4973/xxhash

Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
2017-08-15 09:02:07 -07:00
Linus Torvalds b6ffe9ba46 libnvdimm for 4.13
* Introduce the _flushcache() family of memory copy helpers and use them
   for persistent memory write operations on x86. The _flushcache()
   semantic indicates that the cache is either bypassed for the copy
   operation (movnt) or any lines dirtied by the copy operation are
   written back (clwb, clflushopt, or clflush).
 
 * Extend dax_operations with ->copy_from_iter() and ->flush()
   operations. These operations and other infrastructure updates allow
   all persistent memory specific dax functionality to be pushed into
   libnvdimm and the pmem driver directly. It also allows dax-specific
   sysfs attributes to be linked to a host device, for example:
       /sys/block/pmem0/dax/write_cache
 
 * Add support for the new NVDIMM platform/firmware mechanisms introduced
   in ACPI 6.2 and UEFI 2.7. This support includes the v1.2 namespace
   label format, extensions to the address-range-scrub command set, new
   error injection commands, and a new BTT (block-translation-table)
   layout. These updates support inter-OS and pre-OS compatibility.
 
 * Fix a longstanding memory corruption bug in nfit_test.
 
 * Make the pmem and nvdimm-region 'badblocks' sysfs files poll(2)
   capable.
 
 * Miscellaneous fixes and small updates across libnvdimm and the nfit
   driver.
 
 Acknowledgements that came after the branch was pushed:
 
 commit 6aa734a2f3 "libnvdimm, region, pmem: fix 'badblocks'
   sysfs_get_dirent() reference lifetime"
 Reviewed-by: Toshi Kani <toshi.kani@hpe.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZXsUtAAoJEB7SkWpmfYgCOXcP/06bncqTEvtgrOF2b7O8w+8e
 mTySD51RUn6UpkFd37SMRch+rmbojuqj465TAE7XIXgyLgIOJixKaTlHYUoEnP3X
 rC4Q/g5mN0nittMDwL+vQaa1lQWd2kbjOlrqCgnLHVEEJpHmiQussunjvir4G1U7
 5ROooP8W+qMK5y5XPLJAg/gyGhYkjpRSlDg3Eo5meZZ0IdURbI7+WCLKrPcQUERT
 WmDc9gLhJdSQVxBV/0m2gdAER4ADmFjcrlm8kjXRBhdlUmEFjM0zpvlHJutHTkks
 rNZWCmCJs0Sas+DmRKszFmvVFHRHqUVA3dWK4P6PJEX+tl7BwlPcxpbfacHTG2EZ
 btArFc584DZ+EIrim1cXXRvLFlxnKOFBtBeteFs7l2kZjEcN6S4I5OZgTyeDpe/i
 2WDpHWLQWibkcIzH9y1EuMBkYnQjTJl1pecHzJoTaC+jAQ+opLiY7EecjLmCmQS6
 MBYUeQZNufLGfT5b8KXfpKeiXhpFkYrAGp+ErfoH/6RKy2zqTdagN1yVhos2y+a7
 JJu/Weetpn8qv+KTGUShO8TGyWv3wU46YkG2rKWl0FL1+C+6LMMw1/L0A97lwVlg
 BpypVVyaNu1D22ifZ8O5wbqPIYghoZ5akA0CiduhX19cpl5rTeTd8EvLjvcYhZEZ
 pMHuMAqIcIyLhIe2/sRF
 =xKQB
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm updates from Dan Williams:
 "libnvdimm updates for the latest ACPI and UEFI specifications. This
  pull request also includes new 'struct dax_operations' enabling to
  undo the abuse of copy_user_nocache() for copy operations to pmem.

  The dax work originally missed 4.12 to address concerns raised by Al.

  Summary:

   - Introduce the _flushcache() family of memory copy helpers and use
     them for persistent memory write operations on x86. The
     _flushcache() semantic indicates that the cache is either bypassed
     for the copy operation (movnt) or any lines dirtied by the copy
     operation are written back (clwb, clflushopt, or clflush).

   - Extend dax_operations with ->copy_from_iter() and ->flush()
     operations. These operations and other infrastructure updates allow
     all persistent memory specific dax functionality to be pushed into
     libnvdimm and the pmem driver directly. It also allows dax-specific
     sysfs attributes to be linked to a host device, for example:
     /sys/block/pmem0/dax/write_cache

   - Add support for the new NVDIMM platform/firmware mechanisms
     introduced in ACPI 6.2 and UEFI 2.7. This support includes the v1.2
     namespace label format, extensions to the address-range-scrub
     command set, new error injection commands, and a new BTT
     (block-translation-table) layout. These updates support inter-OS
     and pre-OS compatibility.

   - Fix a longstanding memory corruption bug in nfit_test.

   - Make the pmem and nvdimm-region 'badblocks' sysfs files poll(2)
     capable.

   - Miscellaneous fixes and small updates across libnvdimm and the nfit
     driver.

  Acknowledgements that came after the branch was pushed: commit
  6aa734a2f3 ("libnvdimm, region, pmem: fix 'badblocks'
  sysfs_get_dirent() reference lifetime") was reviewed by Toshi Kani
  <toshi.kani@hpe.com>"

* tag 'libnvdimm-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (42 commits)
  libnvdimm, namespace: record 'lbasize' for pmem namespaces
  acpi/nfit: Issue Start ARS to retrieve existing records
  libnvdimm: New ACPI 6.2 DSM functions
  acpi, nfit: Show bus_dsm_mask in sysfs
  libnvdimm, acpi, nfit: Add bus level dsm mask for pass thru.
  acpi, nfit: Enable DSM pass thru for root functions.
  libnvdimm: passthru functions clear to send
  libnvdimm, btt: convert some info messages to warn/err
  libnvdimm, region, pmem: fix 'badblocks' sysfs_get_dirent() reference lifetime
  libnvdimm: fix the clear-error check in nsio_rw_bytes
  libnvdimm, btt: fix btt_rw_page not returning errors
  acpi, nfit: quiet invalid block-aperture-region warnings
  libnvdimm, btt: BTT updates for UEFI 2.7 format
  acpi, nfit: constify *_attribute_group
  libnvdimm, pmem: disable dax flushing when pmem is fronting a volatile region
  libnvdimm, pmem, dax: export a cache control attribute
  dax: convert to bitmask for flags
  dax: remove default copy_from_iter fallback
  libnvdimm, nfit: enable support for volatile ranges
  libnvdimm, pmem: fix persistence warning
  ...
2017-07-07 09:44:06 -07:00
Dan Williams 0aed55af88 x86, uaccess: introduce copy_from_iter_flushcache for pmem / cache-bypass operations
The pmem driver has a need to transfer data with a persistent memory
destination and be able to rely on the fact that the destination writes are not
cached. It is sufficient for the writes to be flushed to a cpu-store-buffer
(non-temporal / "movnt" in x86 terms), as we expect userspace to call fsync()
to ensure data-writes have reached a power-fail-safe zone in the platform. The
fsync() triggers a REQ_FUA or REQ_FLUSH to the pmem driver which will turn
around and fence previous writes with an "sfence".

Implement a __copy_from_user_inatomic_flushcache, memcpy_page_flushcache, and
memcpy_flushcache, that guarantee that the destination buffer is not dirty in
the cpu cache on completion. The new copy_from_iter_flushcache and sub-routines
will be used to replace the "pmem api" (include/linux/pmem.h +
arch/x86/include/asm/pmem.h). The availability of copy_from_iter_flushcache()
and memcpy_flushcache() are gated by the CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE
config symbol, and fallback to copy_from_iter_nocache() and plain memcpy()
otherwise.

This is meant to satisfy the concern from Linus that if a driver wants to do
something beyond the normal nocache semantics it should be something private to
that driver [1], and Al's concern that anything uaccess related belongs with
the rest of the uaccess code [2].

The first consumer of this interface is a new 'copy_from_iter' dax operation so
that pmem can inject cache maintenance operations without imposing this
overhead on other dax-capable drivers.

[1]: https://lists.01.org/pipermail/linux-nvdimm/2017-January/008364.html
[2]: https://lists.01.org/pipermail/linux-nvdimm/2017-April/009942.html

Cc: <x86@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-09 09:09:56 -07:00
Jeremy Kerr 0cbaa44841 lib: Add crc4 module
Add a little helper for crc4 calculations. This works 4-bits-at-a-time,
using a simple table approach.

We will need this in the FSI core code, as well as any master
implementations that need to calculate CRCs in software.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Chris Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09 11:52:07 +02:00
Linus Torvalds c2eca00fec Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Don't save TIPC header values before the header has been validated,
    from Jon Paul Maloy.

 2) Fix memory leak in RDS, from Zhu Yanjun.

 3) We miss to initialize the UID in the flow key in some paths, from
    Julian Anastasov.

 4) Fix latent TOS masking bug in the routing cache removal from years
    ago, also from Julian.

 5) We forget to set the sockaddr port in sctp_copy_local_addr_list(),
    fix from Xin Long.

 6) Missing module ref count drop in packet scheduler actions, from
    Roman Mashak.

 7) Fix RCU annotations in rht_bucket_nested, from Herbert Xu.

 8) Fix use after free which happens because L2TP's ipv4 support returns
    non-zero values from it's backlog_rcv function which ipv4 interprets
    as protocol values. Fix from Paul Hüber.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits)
  qed: Don't use attention PTT for configuring BW
  qed: Fix race with multiple VFs
  l2tp: avoid use-after-free caused by l2tp_ip_backlog_recv
  xfrm: provide correct dst in xfrm_neigh_lookup
  rhashtable: Fix RCU dereference annotation in rht_bucket_nested
  rhashtable: Fix use before NULL check in bucket_table_free
  net sched actions: do not overwrite status of action creation.
  rxrpc: Kernel calls get stuck in recvmsg
  net sched actions: decrement module reference count after table flush.
  lib: Allow compile-testing of parman
  ipv6: check sk sk_type and protocol early in ip_mroute_set/getsockopt
  sctp: set sin_port for addr param when checking duplicate address
  net/mlx4_en: fix overflow in mlx4_en_init_timestamp()
  netfilter: nft_set_bitmap: incorrect bitmap size
  net: s2io: fix typo argumnet argument
  net: vxge: fix typo argumnet argument
  netfilter: nf_ct_expect: Change __nf_ct_expect_check() return value.
  ipv4: mask tos for input route
  ipv4: add missing initialization for flowi4_uid
  lib: fix spelling mistake: "actualy" -> "actually"
  ...
2017-02-28 10:00:39 -08:00
Geert Uytterhoeven 9d25af69b3 lib: Allow compile-testing of parman
This allows to enable and run the accompanying test (test_parman)
without dependencies on other users of parman.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-26 21:26:47 -05:00
Linus Torvalds ac1820fb28 This is a tree wide change and has been kept separate for that reason.
Bart Van Assche noted that the ib DMA mapping code was significantly
 similar enough to the core DMA mapping code that with a few changes
 it was possible to remove the IB DMA mapping code entirely and
 switch the RDMA stack to use the core DMA mapping code.  This resulted
 in a nice set of cleanups, but touched the entire tree.  This branch
 will be submitted separately to Linus at the end of the merge window
 as per normal practice for tree wide changes like this.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYo06oAAoJELgmozMOVy/d9Z8QALedWHdu98St1L0u2c8sxnR9
 2zo/4sF5Vb9u7FpmdIX32L4SQ9s9KhPE8Qp8NtZLf9v10zlDebIRJDpXknXtKooV
 CAXxX4sxBXV27/UrhbZEfXiPrmm6ccJFyIfRnMU6NlMqh2AtAsRa5AC2/RMp8oUD
 Med97PFiF0o6TD22/UH1VFbRpX1zjaKyqm7a3as5sJfzNA+UGIZAQ7Euz8000DKZ
 xCgVLTEwS0FmOujtBkCst7xa9TjuqR1HLOB4DdGvAhP6BHdz2yamM7Qmh9NN+NEX
 0BtjsuXomtn6j6AszGC+bpipCZh3NUigcwoFAARXCYFHibBvo4DPdFeGsraFgXdy
 1+KyR8CCeQG3Aly5Vwr264RFPGkGpwMj8PsBlXgQVtrlg4rriaCzOJNmIIbfdADw
 ftqhxBOzReZw77aH2s+9p2ILRfcAmPqhynLvFGFo9LBvsik8LVso7YgZN0xGxwcI
 IjI/XGC8UskPVsIZBIYA6sl2bYzgOjtBIHiXjRrPlW3uhduIXLrvKFfLPP/5XLAG
 ehLXK+J0bfsyY9ClmlNS8oH/WdLhXAyy/KNmnj5bRRm9qg6BRJR3bsOBhZJODuoC
 XgEXFfF6/7roNESWxowff7pK0rTkRg/m/Pa4VQpeO+6NWHE7kgZhL6kyIp5nKcwS
 3e7mgpcwC+3XfA/6vU3F
 =e0Si
 -----END PGP SIGNATURE-----

Merge tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

Pull rdma DMA mapping updates from Doug Ledford:
 "Drop IB DMA mapping code and use core DMA code instead.

  Bart Van Assche noted that the ib DMA mapping code was significantly
  similar enough to the core DMA mapping code that with a few changes it
  was possible to remove the IB DMA mapping code entirely and switch the
  RDMA stack to use the core DMA mapping code.

  This resulted in a nice set of cleanups, but touched the entire tree
  and has been kept separate for that reason."

* tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits)
  IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it
  IB/core: Remove ib_device.dma_device
  nvme-rdma: Switch from dma_device to dev.parent
  RDS: net: Switch from dma_device to dev.parent
  IB/srpt: Modify a debug statement
  IB/srp: Switch from dma_device to dev.parent
  IB/iser: Switch from dma_device to dev.parent
  IB/IPoIB: Switch from dma_device to dev.parent
  IB/rxe: Switch from dma_device to dev.parent
  IB/vmw_pvrdma: Switch from dma_device to dev.parent
  IB/usnic: Switch from dma_device to dev.parent
  IB/qib: Switch from dma_device to dev.parent
  IB/qedr: Switch from dma_device to dev.parent
  IB/ocrdma: Switch from dma_device to dev.parent
  IB/nes: Remove a superfluous assignment statement
  IB/mthca: Switch from dma_device to dev.parent
  IB/mlx5: Switch from dma_device to dev.parent
  IB/mlx4: Switch from dma_device to dev.parent
  IB/i40iw: Remove a superfluous assignment statement
  IB/hns: Switch from dma_device to dev.parent
  ...
2017-02-25 13:45:43 -08:00
Geert Uytterhoeven ba95b045e9 lib: add module support to glob tests
Extract the glob test code into its own source file, to allow to compile
it either to a loadable module, or builtin into the kernel.

Link: http://lkml.kernel.org/r/1483470276-10517-2-git-send-email-geert@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 17:46:57 -08:00
Geert Uytterhoeven 5fb7f87408 lib: add module support to crc32 tests
Extract the crc32 test code into its own source file, to allow to
compile it either to a loadable module, or builtin into the kernel.

Link: http://lkml.kernel.org/r/1483470276-10517-1-git-send-email-geert@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 17:46:57 -08:00
Linus Torvalds ef96152e6a Less anger inducing pull request for 4.11
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYr5aeAAoJEAx081l5xIa+ZK4P/RD3XUsduYqziVFCRQ2n0X8r
 +D92F4peTnSeSq7ZcZvprv+fezUGAHbfsWFs8feYCI5quUO6pEQSPwN+wyGazUi0
 4hUVB/K9Iq7U/Bj7Z/SmsU3NuWJnkNqbmvSFvUdqYK9D/kl+Tnllzap2N4cTzjwu
 GZOObz4n85cx94NqC3qw+7/ptL1X2MhXa+z0MzbkKyas84Bko1LwCSHRHsDKUnJc
 IcSpOcYZ6pSRMIsKH4Kd79Go4vWm7djXT9XL3PwDk2NcXXUOuR+cfdHqYchYaM/O
 iD2hvaSywBcflxSAml5x6vlXraoRd91ZZulgOObXtFfnUXdZB81TVq4uv6LU4Bx3
 jLFixUZuk/TJT+W/8N10l7M6yMIFaTpNoNMc5n4IF5RNNyWba4BKnrI+f+lQiOpY
 mmjIaidb0t5BICnJzCD264RhCEXmP0HaDV+iQQV6y6jJRXfd1bgnOXLKP73JekzB
 TsbDshCoE7UO0dJ7n0LFpXSTQDTYzlazoEp14f2kFBxir5/l7r67nUlnDTvUQfuN
 tSRvpN/s0wqvH3o7zhmpHxyJ/ZasPMQjNCFAuUEbx8L5SKXsua0FubIzN4aVpilb
 XvfdFRWM/lkOT/q+8cGI/TcE3YTqEmALmGxdV/akbdNCiCg6aClyCLRE/DZhgmSQ
 UMFjr9wlHl5Qo/OqLKj0
 =Yjfg
 -----END PGP SIGNATURE-----

Merge tag 'drm-for-v4.11-less-shouty' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for v4.11.

  Nothing too major, the tinydrm and mmu-less support should make
  writing smaller drivers easier for some of the simpler platforms, and
  there are a bunch of documentation updates.

  Intel grew displayport MST audio support which is hopefully useful to
  people, and FBC is on by default for GEN9+ (so people know where to
  look for regressions). AMDGPU has a lot of fixes that would like new
  firmware files installed for some GPUs.

  Other than that it's pretty scattered all over.

  I may have a follow up pull request as I know BenH has a bunch of AST
  rework and fixes and I'd like to get those in once they've been tested
  by AST, and I've got at least one pull request I'm just trying to get
  the author to fix up.

  Core:
   - drm_mm reworked
   - Connector list locking and iterators
   - Documentation updates
   - Format handling rework
   - MMU-less support for fbdev helpers
   - drm_crtc_from_index helper
   - Core CRC API
   - Remove drm_framebuffer_unregister_private
   - Debugfs cleanup
   - EDID/Infoframe fixes
   - Release callback
   - Tinydrm support (smaller drivers for simple hw)

  panel:
   - Add support for some new simple panels

  i915:
   - FBC by default for gen9+
   - Shared dpll cleanups and docs
   - GEN8 powerdomain cleanup
   - DMC support on GLK
   - DP MST audio support
   - HuC loading support
   - GVT init ordering fixes
   - GVT IOMMU workaround fix

  amdgpu/radeon:
   - Power/clockgating improvements
   - Preliminary SR-IOV support
   - TTM buffer priority and eviction fixes
   - SI DPM quirks removed due to firmware fixes
   - Powerplay improvements
   - VCE/UVD powergating fixes
   - Cleanup SI GFX code to match CI/VI
   - Support for > 2 displays on 3/5 crtc asics
   - SI headless fixes

  nouveau:
   - Rework securre boot code in prep for GP10x secure boot
   - Channel recovery improvements
   - Initial power budget code
   - MMU rework preperation

  vmwgfx:
   - Bunch of fixes and cleanups

  exynos:
   - Runtime PM support for MIC driver
   - Cleanups to use atomic helpers
   - UHD Support for TM2/TM2E boards
   - Trigger mode fix for Rinato board

  etnaviv:
   - Shader performance fix
   - Command stream validator fixes
   - Command buffer suballocator

  rockchip:
   - CDN DisplayPort support
   - IOMMU support for arm64 platform

  imx-drm:
   - Fix i.MX5 TV encoder probing
   - Remove lower fb size limits

  msm:
   - Support for HW cursor on MDP5 devices
   - DSI encoder cleanup
   - GPU DT bindings cleanup

  sti:
   - stih410 cleanups
   - Create fbdev at binding
   - HQVDP fixes
   - Remove stih416 chip functionality
   - DVI/HDMI mode selection fixes
   - FPS statistic reporting

  omapdrm:
   - IRQ code cleanup

  dwi-hdmi bridge:
   - Cleanups and fixes

  adv-bridge:
   - Updates for nexus

  sii8520 bridge:
   - Add interlace mode support
   - Rework HDMI and lots of fixes

  qxl:
   - probing/teardown cleanups

  ZTE drm:
   - HDMI audio via SPDIF interface
   - Video Layer overlay plane support
   - Add TV encoder output device

  atmel-hlcdc:
   - Rework fbdev creation logic

  tegra:
   - OF node fix

  fsl-dcu:
   - Minor fixes

  mali-dp:
   - Assorted fixes

  sunxi:
   - Minor fix"

[ This was the "fixed" pull, that still had build warnings due to people
  not even having build tested the result. I'm not a happy camper

  I've fixed the things I noticed up in this merge.      - Linus ]

* tag 'drm-for-v4.11-less-shouty' of git://people.freedesktop.org/~airlied/linux: (1177 commits)
  lib/Kconfig: make PRIME_NUMBERS not user selectable
  drm/tinydrm: helpers: Properly fix backlight dependency
  drm/tinydrm: mipi-dbi: Fix field width specifier warning
  drm/tinydrm: mipi-dbi: Silence: ‘cmd’ may be used uninitialized
  drm/sti: fix build warnings in sti_drv.c and sti_vtg.c files
  drm/amd/powerplay: fix PSI feature on Polars12
  drm/amdgpu: refuse to reserve io mem for split VRAM buffers
  drm/ttm: fix use-after-free races in vm fault handling
  drm/tinydrm: Add support for Multi-Inno MI0283QT display
  dt-bindings: Add Multi-Inno MI0283QT binding
  dt-bindings: display/panel: Add common rotation property
  of: Add vendor prefix for Multi-Inno
  drm/tinydrm: Add MIPI DBI support
  drm/tinydrm: Add helper functions
  drm: Add DRM support for tiny LCD displays
  drm/amd/amdgpu: post card if there is real hw resetting performed
  drm/nouveau/tmr: provide backtrace when a timeout is hit
  drm/nouveau/pci/g92: Fix rearm
  drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios
  drm/nouveau/hwmon: expose power_max and power_crit
  ..
2017-02-23 18:58:18 -08:00
Dave Airlie 64a577196d lib/Kconfig: make PRIME_NUMBERS not user selectable.
Linus doesn't like it user selectable, so kill it until
someone needs it for something else.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-02-24 12:11:21 +10:00
Jiri Pirko 50ab3af16c lib: Remove string from parman config selection
As reported by Geert, remove the string so the user does not see this
config option. The option is explicitly selected only as a dependency of
in-kernel users.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 44091d29f2 ("lib: Introduce priority array area manager")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-23 10:55:07 -05:00
Jiri Pirko 44091d29f2 lib: Introduce priority array area manager
This introduces a infrastructure for management of linear priority
areas. Priority order in an array matters, however order of items inside
a priority group does not matter.

As an initial implementation, L-sort algorithm is used. It is quite
trivial. More advanced algorithm called P-sort will be introduced as a
follow-up. The infrastructure is prepared for other algos.

Alongside this, a testing module is introduced as well.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03 16:35:42 -05:00
Bart Van Assche 551199aca1 lib/dma-virt: Add dma_virt_ops
Several RDMA drivers (hfi1, qib and rxe) expect that ib_sge.addr
is a virtual address. Provide DMA mapping operations that are
suitable for these drivers.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24 12:23:35 -05:00
Bart Van Assche 7844572c63 lib/dma-noop: Only build dma_noop_ops for s390 and m32r
Reduce the kernel size by only building dma_noop_ops for those
architectures that actually use it. This was suggested by
Christoph Hellwig.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-01-24 12:23:35 -05:00
Chris Wilson cf4a7207b1 lib: Add a simple prime number generator
Prime numbers are interesting for testing components that use multiplies
and divides, such as testing DRM's struct drm_mm alignment computations.

v2: Move to lib/, add selftest
v3: Fix initial constants (exclude 0/1 from being primes)
v4: More RCU markup to keep 0day/sparse happy
v5: Fix RCU unwind on module exit, add to kselftests
v6: Tidy computation of bitmap size
v7: for_each_prime_number_from()
v8: Compose small-primes using BIT() for easier verification
v9: Move rcu dance entirely into callers.
v10: Improve quote for Betrand's Postulate (aka Chebyshev's theorem)

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161222144514.3911-1-chris@chris-wilson.co.uk
2016-12-27 12:30:56 +01:00
Linus Torvalds b66484cd74 Merge branch 'akpm' (patches from Andrew)
Merge updates from Andrew Morton:

 - fsnotify updates

 - ocfs2 updates

 - all of MM

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (127 commits)
  console: don't prefer first registered if DT specifies stdout-path
  cred: simpler, 1D supplementary groups
  CREDITS: update Pavel's information, add GPG key, remove snail mail address
  mailmap: add Johan Hovold
  .gitattributes: set git diff driver for C source code files
  uprobes: remove function declarations from arch/{mips,s390}
  spelling.txt: "modeled" is spelt correctly
  nmi_backtrace: generate one-line reports for idle cpus
  arch/tile: adopt the new nmi_backtrace framework
  nmi_backtrace: do a local dump_stack() instead of a self-NMI
  nmi_backtrace: add more trigger_*_cpu_backtrace() methods
  min/max: remove sparse warnings when they're nested
  Documentation/filesystems/proc.txt: add more description for maps/smaps
  mm, proc: fix region lost in /proc/self/smaps
  proc: fix timerslack_ns CAP_SYS_NICE check when adjusting self
  proc: add LSM hook checks to /proc/<tid>/timerslack_ns
  proc: relax /proc/<tid>/timerslack_ns capability requirements
  meminfo: break apart a very long seq_printf with #ifdefs
  seq/proc: modify seq_put_decimal_[u]ll to take a const char *, not char
  proc: faster /proc/*/status
  ...
2016-10-07 21:38:00 -07:00
Vineet Gupta 51a021244b atomic64: no need for CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
This came to light when implementing native 64-bit atomics for ARCv2.

The atomic64 self-test code uses CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
to check whether atomic64_dec_if_positive() is available.  It seems it
was needed when not every arch defined it.  However as of current code
the Kconfig option seems needless

 - for CONFIG_GENERIC_ATOMIC64 it is auto-enabled in lib/Kconfig and a
   generic definition of API is present lib/atomic64.c
 - arches with native 64-bit atomics select it in arch/*/Kconfig and
   define the API in their headers

So I see no point in keeping the Kconfig option

Compile tested for:
 - blackfin (CONFIG_GENERIC_ATOMIC64)
 - x86 (!CONFIG_GENERIC_ATOMIC64)
 - ia64

Link: http://lkml.kernel.org/r/1473703083-8625-3-git-send-email-vgupta@synopsys.com
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Zhaoxiu Zeng <zhaoxiu.zeng@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Ming Lin <ming.l@ssi.samsung.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:30 -07:00
Omar Sandoval 88459642cb blk-mq: abstract tag allocation out into sbitmap library
This is a generally useful data structure, so make it available to
anyone else who might want to use it. It's also a nice cleanup
separating the allocation logic from the rest of the tag handling logic.

The code is behind a new Kconfig option, CONFIG_SBITMAP, which is only
selected by CONFIG_BLOCK for now.

This should be a complete noop functionality-wise.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-17 08:38:44 -06:00
Matthew Wilcox 57578c2ea2 raxix-tree: introduce CONFIG_RADIX_TREE_MULTIORDER
I've been receiving increasingly concerned notes from 0day about how
much my recent changes have been bloating the radix tree.  Make it
happier by only including multiorder support if
CONFIG_TRANSPARENT_HUGEPAGES is set.

This is an independent Kconfig option, so other radix tree users can
also set it if they have a need.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 17:58:30 -07:00
Ming Lin 9b1d6c8950 lib: scatterlist: move SG pool code from SCSI driver to lib/sg_pool.c
Now it's ready to move the mempool based SG chained allocator code from
SCSI driver to lib/sg_pool.c, which will be compiled only based on a Kconfig
symbol CONFIG_SG_POOL.

SCSI selects CONFIG_SG_POOL.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-15 16:53:14 -04:00
Alexander Potapenko cd11016e5f mm, kasan: stackdepot implementation. Enable stackdepot for SLAB
Implement the stack depot and provide CONFIG_STACKDEPOT.  Stack depot
will allow KASAN store allocation/deallocation stack traces for memory
chunks.  The stack traces are stored in a hash table and referenced by
handles which reside in the kasan_alloc_meta and kasan_free_meta
structures in the allocated memory chunks.

IRQ stack traces are cut below the IRQ entry point to avoid unnecessary
duplication.

Right now stackdepot support is only enabled in SLAB allocator.  Once
KASAN features in SLAB are on par with those in SLUB we can switch SLUB
to stackdepot as well, thus removing the dependency on SLUB stack
bookkeeping, which wastes a lot of memory.

This patch is based on the "mm: kasan: stack depots" patch originally
prepared by Dmitry Chernenkov.

Joonsoo has said that he plans to reuse the stackdepot code for the
mm/page_owner.c debugging facility.

[akpm@linux-foundation.org: s/depot_stack_handle/depot_stack_handle_t]
[aryabinin@virtuozzo.com: comment style fixes]
Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrey Konovalov <adech.fo@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 16:37:42 -07:00
Linus Torvalds 048ccca8c1 Initial roundup of 4.5 merge window patches
- Remove usage of ib_query_device and instead store attributes in
   ib_device struct
 - Move iopoll out of block and into lib, rename to irqpoll, and use
   in several places in the rdma stack as our new completion queue
   polling library mechanism.  Update the other block drivers that
   already used iopoll to use the new mechanism too.
 - Replace the per-entry GID table locks with a single GID table lock
 - IPoIB multicast cleanup
 - Cleanups to the IB MR facility
 - Add support for 64bit extended IB counters
 - Fix for netlink oops while parsing RDMA nl messages
 - RoCEv2 support for the core IB code
 - mlx4 RoCEv2 support
 - mlx5 RoCEv2 support
 - Cross Channel support for mlx5
 - Timestamp support for mlx5
 - Atomic support for mlx5
 - Raw QP support for mlx5
 - MAINTAINERS update for mlx4/mlx5
 - Misc ocrdma, qib, nes, usNIC, cxgb3, cxgb4, mlx4, mlx5 updates
 - Add support for remote invalidate to the iSER driver (pushed through the
   RDMA tree due to dependencies, acknowledged by nab)
 - Update to NFSoRDMA (pushed through the RDMA tree due to dependencies,
   acknowledged by Bruce)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWoSygAAoJELgmozMOVy/dDjsP/2vbTda2MvQfkfkGEZBQdJSg
 095RN0gQgCJdg78lAl8yuaK8r4VN/7uefpDtFdudH1I/Pei7X0wxN9R1UzFNG4KR
 AD53lz92IVPs15328SbPR2kvNWISR9aBFQo3rlElq3Grqlp0EMn2Ou1vtu87rekF
 aMllxr8Nl0uZhP+eWusOsYpJUUtwirLgRnrAyfqo2UxZh/TMIroT0TCx1KXjVcAg
 dhDARiZAdu3OgSc6OsWqmH+DELEq6dFVA5F+DDBGAb8bFZqlJc7cuMHWInwNsNXT
 so4bnEQ835alTbsdYtqs5DUNS8heJTAJP4Uz0ehkTh/uNCcvnKeUTw1c2P/lXI1k
 7s33gMM+0FXj0swMBw0kKwAF2d9Hhus9UAN7NwjBuOyHcjGRd5q7SAnfWkvKx000
 s9jVW19slb2I38gB58nhjOh8s+vXUArgxnV1+kTia1+bJSR5swvVoWRicRXdF0vh
 TvLX/BjbSIU73g1TnnLNYoBTV3ybFKQ6bVdQW7fzSTDs54dsI1vvdHXi3bYZCpnL
 HVwQTZRfEzkvb0AdKbcvf8p/TlaAHem3ODqtO1eHvO4if1QJBSn+SptTEeJVYYdK
 n4B3l/dMoBH4JXJUmEHB9jwAvYOpv/YLAFIvdL7NFwbqGNsC3nfXFcmkVORB1W3B
 KEMcM2we4bz+uyKMjEAD
 =5oO7
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

Pull rdma updates from Doug Ledford:
 "Initial roundup of 4.5 merge window patches

   - Remove usage of ib_query_device and instead store attributes in
     ib_device struct

   - Move iopoll out of block and into lib, rename to irqpoll, and use
     in several places in the rdma stack as our new completion queue
     polling library mechanism.  Update the other block drivers that
     already used iopoll to use the new mechanism too.

   - Replace the per-entry GID table locks with a single GID table lock

   - IPoIB multicast cleanup

   - Cleanups to the IB MR facility

   - Add support for 64bit extended IB counters

   - Fix for netlink oops while parsing RDMA nl messages

   - RoCEv2 support for the core IB code

   - mlx4 RoCEv2 support

   - mlx5 RoCEv2 support

   - Cross Channel support for mlx5

   - Timestamp support for mlx5

   - Atomic support for mlx5

   - Raw QP support for mlx5

   - MAINTAINERS update for mlx4/mlx5

   - Misc ocrdma, qib, nes, usNIC, cxgb3, cxgb4, mlx4, mlx5 updates

   - Add support for remote invalidate to the iSER driver (pushed
     through the RDMA tree due to dependencies, acknowledged by nab)

   - Update to NFSoRDMA (pushed through the RDMA tree due to
     dependencies, acknowledged by Bruce)"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (169 commits)
  IB/mlx5: Unify CQ create flags check
  IB/mlx5: Expose Raw Packet QP to user space consumers
  {IB, net}/mlx5: Move the modify QP operation table to mlx5_ib
  IB/mlx5: Support setting Ethernet priority for Raw Packet QPs
  IB/mlx5: Add Raw Packet QP query functionality
  IB/mlx5: Add create and destroy functionality for Raw Packet QP
  IB/mlx5: Refactor mlx5_ib_qp to accommodate other QP types
  IB/mlx5: Allocate a Transport Domain for each ucontext
  net/mlx5_core: Warn on unsupported events of QP/RQ/SQ
  net/mlx5_core: Add RQ and SQ event handling
  net/mlx5_core: Export transport objects
  IB/mlx5: Expose CQE version to user-space
  IB/mlx5: Add CQE version 1 support to user QPs and SRQs
  IB/mlx5: Fix data validation in mlx5_ib_alloc_ucontext
  IB/sa: Fix netlink local service GFP crash
  IB/srpt: Remove redundant wc array
  IB/qib: Improve ipoib UD performance
  IB/mlx4: Advertise RoCE v2 support
  IB/mlx4: Create and use another QP1 for RoCEv2
  IB/mlx4: Enable send of RoCE QP1 packets with IP/UDP headers
  ...
2016-01-23 18:45:06 -08:00
Linus Torvalds 48162a203e Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
 "This fixes the following issues:

  API:
   - A large number of bug fixes for the af_alg interface, credit goes
     to Dmitry Vyukov for discovering and reporting these issues.

  Algorithms:
   - sw842 needs to select crc32.
   - The soft dependency on crc32c is now in the correct spot.

  Drivers:
   - The atmel AES driver needs HAS_DMA.
   - The atmel AES driver was a missing break statement, fortunately
     it's only a debug function.
   - A number of bug fixes for the Intel qat driver"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (24 commits)
  crypto: algif_skcipher - sendmsg SG marking is off by one
  crypto: crc32c - Fix crc32c soft dependency
  crypto: algif_skcipher - Load TX SG list after waiting
  crypto: atmel-aes - Add missing break to atmel_aes_reg_name
  crypto: algif_skcipher - Fix race condition in skcipher_check_key
  crypto: algif_hash - Fix race condition in hash_check_key
  crypto: CRYPTO_DEV_ATMEL_AES should depend on HAS_DMA
  lib: sw842: select crc32
  crypto: af_alg - Forbid bind(2) when nokey child sockets are present
  crypto: algif_skcipher - Remove custom release parent function
  crypto: algif_hash - Remove custom release parent function
  crypto: af_alg - Allow af_af_alg_release_parent to be called on nokey path
  crypto: qat - update init_esram for C3xxx dev type
  crypto: qat - fix timeout issues
  crypto: qat - remove to call get_sram_bar_id for qat_c3xxx
  crypto: algif_skcipher - Add key check exception for cipher_null
  crypto: skcipher - Add crypto_skcipher_has_setkey
  crypto: algif_hash - Require setkey before accept(2)
  crypto: hash - Add crypto_ahash_has_setkey
  crypto: algif_skcipher - Add nokey compatibility path
  ...
2016-01-22 11:58:43 -08:00
Arnd Bergmann 5b57167749 lib: sw842: select crc32
The sw842 library code was merged in linux-4.1 and causes a very rare randconfig
failure when CONFIG_CRC32 is not set:

    lib/built-in.o: In function `sw842_compress':
    oid_registry.c:(.text+0x12ddc): undefined reference to `crc32_be'
    lib/built-in.o: In function `sw842_decompress':
    oid_registry.c:(.text+0x137e4): undefined reference to `crc32_be'

This adds an explict 'select CRC32' statement, similar to what the other users
of the crc32 code have. In practice, CRC32 is always enabled anyway because
over 100 other symbols select it.

Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 2da572c959 ("lib: add software 842 compression/decompression")
Acked-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-01-18 18:16:33 +08:00
Christoph Hellwig 511cbce2ff irq_poll: make blk-iopoll available outside the block layer
The new name is irq_poll as iopoll is already taken.  Better suggestions
welcome.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
2015-12-11 11:52:24 -08:00
Geert Uytterhoeven 7f7e92f755 lib: scatterlist: fix Kconfig description
Spelling s/heler/helper/, grammar s/channel/channels/

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-12-08 14:40:57 +01:00
Andrew Morton 1fd4e5c347 lib/Kconfig: ZLIB_DEFLATE must select BITREVERSE
lib/built-in.o: In function `__bitrev32':
deftree.c:(.text+0x1e799): undefined reference to `byte_rev_table'
deftree.c:(.text+0x1e7a0): undefined reference to `byte_rev_table'
deftree.c:(.text+0x1e7b4): undefined reference to `byte_rev_table'
deftree.c:(.text+0x1e7c1): undefined reference to `byte_rev_table'

Anything which uses bitrevX() has to select BITREVERSE, to grab
lib/bitrev.o.

Reported-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-10-16 11:42:28 -07:00
Linus Torvalds 12f03ee606 libnvdimm for 4.3:
1/ Introduce ZONE_DEVICE and devm_memremap_pages() as a generic
    mechanism for adding device-driver-discovered memory regions to the
    kernel's direct map.  This facility is used by the pmem driver to
    enable pfn_to_page() operations on the page frames returned by DAX
    ('direct_access' in 'struct block_device_operations'). For now, the
    'memmap' allocation for these "device" pages comes from "System
    RAM".  Support for allocating the memmap from device memory will
    arrive in a later kernel.
 
 2/ Introduce memremap() to replace usages of ioremap_cache() and
    ioremap_wt().  memremap() drops the __iomem annotation for these
    mappings to memory that do not have i/o side effects.  The
    replacement of ioremap_cache() with memremap() is limited to the
    pmem driver to ease merging the api change in v4.3.  Completion of
    the conversion is targeted for v4.4.
 
 3/ Similar to the usage of memcpy_to_pmem() + wmb_pmem() in the pmem
    driver, update the VFS DAX implementation and PMEM api to provide
    persistence guarantees for kernel operations on a DAX mapping.
 
 4/ Convert the ACPI NFIT 'BLK' driver to map the block apertures as
    cacheable to improve performance.
 
 5/ Miscellaneous updates and fixes to libnvdimm including support
    for issuing "address range scrub" commands, clarifying the optimal
    'sector size' of pmem devices, a clarification of the usage of the
    ACPI '_STA' (status) property for DIMM devices, and other minor
    fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV6Nx7AAoJEB7SkWpmfYgCWyYQAI5ju6Gvw27RNFtPovHcZUf5
 JGnxXejI6/AqeTQ+IulgprxtEUCrXOHjCDA5dkjr1qvsoqK1qxug+vJHOZLgeW0R
 OwDtmdW4Qrgeqm+CPoxETkorJ8wDOc8mol81kTiMgeV3UqbYeeHIiTAmwe7VzZ0C
 nNdCRDm5g8dHCjTKcvK3rvozgyoNoWeBiHkPe76EbnxDICxCB5dak7XsVKNMIVFQ
 NuYlnw6IYN7+rMHgpgpRux38NtIW8VlYPWTmHExejc2mlioWMNBG/bmtwLyJ6M3e
 zliz4/cnonTMUaizZaVozyinTa65m7wcnpjK+vlyGV2deDZPJpDRvSOtB0lH30bR
 1gy+qrKzuGKpaN6thOISxFLLjmEeYwzYd7SvC9n118r32qShz+opN9XX0WmWSFlA
 sajE1ehm4M7s5pkMoa/dRnAyR8RUPu4RNINdQ/Z9jFfAOx+Q26rLdQXwf9+uqbEb
 bIeSQwOteK5vYYCstvpAcHSMlJAglzIX5UfZBvtEIJN7rlb0VhmGWfxAnTu+ktG1
 o9cqAt+J4146xHaFwj5duTsyKhWb8BL9+xqbKPNpXEp+PbLsrnE/+WkDLFD67jxz
 dgIoK60mGnVXp+16I2uMqYYDgAyO5zUdmM4OygOMnZNa1mxesjbDJC6Wat1Wsndn
 slsw6DkrWT60CRE42nbK
 =o57/
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm updates from Dan Williams:
 "This update has successfully completed a 0day-kbuild run and has
  appeared in a linux-next release.  The changes outside of the typical
  drivers/nvdimm/ and drivers/acpi/nfit.[ch] paths are related to the
  removal of IORESOURCE_CACHEABLE, the introduction of memremap(), and
  the introduction of ZONE_DEVICE + devm_memremap_pages().

  Summary:

   - Introduce ZONE_DEVICE and devm_memremap_pages() as a generic
     mechanism for adding device-driver-discovered memory regions to the
     kernel's direct map.

     This facility is used by the pmem driver to enable pfn_to_page()
     operations on the page frames returned by DAX ('direct_access' in
     'struct block_device_operations').

     For now, the 'memmap' allocation for these "device" pages comes
     from "System RAM".  Support for allocating the memmap from device
     memory will arrive in a later kernel.

   - Introduce memremap() to replace usages of ioremap_cache() and
     ioremap_wt().  memremap() drops the __iomem annotation for these
     mappings to memory that do not have i/o side effects.  The
     replacement of ioremap_cache() with memremap() is limited to the
     pmem driver to ease merging the api change in v4.3.

     Completion of the conversion is targeted for v4.4.

   - Similar to the usage of memcpy_to_pmem() + wmb_pmem() in the pmem
     driver, update the VFS DAX implementation and PMEM api to provide
     persistence guarantees for kernel operations on a DAX mapping.

   - Convert the ACPI NFIT 'BLK' driver to map the block apertures as
     cacheable to improve performance.

   - Miscellaneous updates and fixes to libnvdimm including support for
     issuing "address range scrub" commands, clarifying the optimal
     'sector size' of pmem devices, a clarification of the usage of the
     ACPI '_STA' (status) property for DIMM devices, and other minor
     fixes"

* tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (34 commits)
  libnvdimm, pmem: direct map legacy pmem by default
  libnvdimm, pmem: 'struct page' for pmem
  libnvdimm, pfn: 'struct page' provider infrastructure
  x86, pmem: clarify that ARCH_HAS_PMEM_API implies PMEM mapped WB
  add devm_memremap_pages
  mm: ZONE_DEVICE for "device memory"
  mm: move __phys_to_pfn and __pfn_to_phys to asm/generic/memory_model.h
  dax: drop size parameter to ->direct_access()
  nd_blk: change aperture mapping from WC to WB
  nvdimm: change to use generic kvfree()
  pmem, dax: have direct_access use __pmem annotation
  dax: update I/O path to do proper PMEM flushing
  pmem: add copy_from_iter_pmem() and clear_pmem()
  pmem, x86: clean up conditional pmem includes
  pmem: remove layer when calling arch_has_wmb_pmem()
  pmem, x86: move x86 PMEM API to new pmem.h header
  libnvdimm, e820: make CONFIG_X86_PMEM_LEGACY a tristate option
  pmem: switch to devm_ allocations
  devres: add devm_memremap
  libnvdimm, btt: write and validate parent_uuid
  ...
2015-09-08 14:35:59 -07:00
Linus Torvalds 7d9071a095 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
 "In this one:

   - d_move fixes (Eric Biederman)

   - UFS fixes (me; locking is mostly sane now, a bunch of bugs in error
     handling ought to be fixed)

   - switch of sb_writers to percpu rwsem (Oleg Nesterov)

   - superblock scalability (Josef Bacik and Dave Chinner)

   - swapon(2) race fix (Hugh Dickins)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (65 commits)
  vfs: Test for and handle paths that are unreachable from their mnt_root
  dcache: Reduce the scope of i_lock in d_splice_alias
  dcache: Handle escaped paths in prepend_path
  mm: fix potential data race in SyS_swapon
  inode: don't softlockup when evicting inodes
  inode: rename i_wb_list to i_io_list
  sync: serialise per-superblock sync operations
  inode: convert inode_sb_list_lock to per-sb
  inode: add hlist_fake to avoid the inode hash lock in evict
  writeback: plug writeback at a high level
  change sb_writers to use percpu_rw_semaphore
  shift percpu_counter_destroy() into destroy_super_work()
  percpu-rwsem: kill CONFIG_PERCPU_RWSEM
  percpu-rwsem: introduce percpu_rwsem_release() and percpu_rwsem_acquire()
  percpu-rwsem: introduce percpu_down_read_trylock()
  document rwsem_release() in sb_wait_write()
  fix the broken lockdep logic in __sb_start_write()
  introduce __sb_writers_{acquired,release}() helpers
  ufs_inode_get{frag,block}(): get rid of 'phys' argument
  ufs_getfrag_block(): tidy up a bit
  ...
2015-09-05 20:34:28 -07:00
Linus Torvalds dd5cdb48ed Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Another merge window, another set of networking changes.  I've heard
  rumblings that the lightweight tunnels infrastructure has been voted
  networking change of the year.  But what do I know?

   1) Add conntrack support to openvswitch, from Joe Stringer.

   2) Initial support for VRF (Virtual Routing and Forwarding), which
      allows the segmentation of routing paths without using multiple
      devices.  There are some semantic kinks to work out still, but
      this is a reasonably strong foundation.  From David Ahern.

   3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov.

   4) Ignore route nexthops with a link down state in ipv6, just like
      ipv4.  From Andy Gospodarek.

   5) Remove spinlock from fast path of act_gact and act_mirred, from
      Eric Dumazet.

   6) Document the DSA layer, from Florian Fainelli.

   7) Add netconsole support to bcmgenet, systemport, and DSA.  Also
      from Florian Fainelli.

   8) Add Mellanox Switch Driver and core infrastructure, from Jiri
      Pirko.

   9) Add support for "light weight tunnels", which allow for
      encapsulation and decapsulation without bearing the overhead of a
      full blown netdevice.  From Thomas Graf, Jiri Benc, and a cast of
      others.

  10) Add Identifier Locator Addressing support for ipv6, from Tom
      Herbert.

  11) Support fragmented SKBs in iwlwifi, from Johannes Berg.

  12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia.

  13) Add BQL support to 3c59x driver, from Loganaden Velvindron.

  14) Stop using a zero TX queue length to mean that a device shouldn't
      have a qdisc attached, use an explicit flag instead.  From Phil
      Sutter.

  15) Use generic geneve netdevice infrastructure in openvswitch, from
      Pravin B Shelar.

  16) Add infrastructure to avoid re-forwarding a packet in software
      that was already forwarded by a hardware switch.  From Scott
      Feldman.

  17) Allow AF_PACKET fanout function to be implemented in a bpf
      program, from Willem de Bruijn"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits)
  netfilter: nf_conntrack: make nf_ct_zone_dflt built-in
  netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled
  net: fec: clear receive interrupts before processing a packet
  ipv6: fix exthdrs offload registration in out_rt path
  xen-netback: add support for multicast control
  bgmac: Update fixed_phy_register()
  sock, diag: fix panic in sock_diag_put_filterinfo
  flow_dissector: Use 'const' where possible.
  flow_dissector: Fix function argument ordering dependency
  ixgbe: Resolve "initialized field overwritten" warnings
  ixgbe: Remove bimodal SR-IOV disabling
  ixgbe: Add support for reporting 2.5G link speed
  ixgbe: fix bounds checking in ixgbe_setup_tc for 82598
  ixgbe: support for ethtool set_rxfh
  ixgbe: Avoid needless PHY access on copper phys
  ixgbe: cleanup to use cached mask value
  ixgbe: Remove second instance of lan_id variable
  ixgbe: use kzalloc for allocating one thing
  flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c
  ixgbe: Remove unused PCI bus types
  ...
2015-09-03 08:08:17 -07:00
Ross Zwisler 67a3e8fe90 nd_blk: change aperture mapping from WC to WB
This should result in a pretty sizeable performance gain for reads.  For
rough comparison I did some simple read testing using PMEM to compare
reads of write combining (WC) mappings vs write-back (WB).  This was
done on a random lab machine.

PMEM reads from a write combining mapping:
	# dd of=/dev/null if=/dev/pmem0 bs=4096 count=100000
	100000+0 records in
	100000+0 records out
	409600000 bytes (410 MB) copied, 9.2855 s, 44.1 MB/s

PMEM reads from a write-back mapping:
	# dd of=/dev/null if=/dev/pmem0 bs=4096 count=1000000
	1000000+0 records in
	1000000+0 records out
	4096000000 bytes (4.1 GB) copied, 3.44034 s, 1.2 GB/s

To be able to safely support a write-back aperture I needed to add
support for the "read flush" _DSM flag, as outlined in the DSM spec:

http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf

This flag tells the ND BLK driver that it needs to flush the cache lines
associated with the aperture after the aperture is moved but before any
new data is read.  This ensures that any stale cache lines from the
previous contents of the aperture will be discarded from the processor
cache, and the new data will be read properly from the DIMM.  We know
that the cache lines are clean and will be discarded without any
writeback because either a) the previous aperture operation was a read,
and we never modified the contents of the aperture, or b) the previous
aperture operation was a write and we must have written back the dirtied
contents of the aperture to the DIMM before the I/O was completed.

In order to add support for the "read flush" flag I needed to add a
generic routine to invalidate cache lines, mmio_flush_range().  This is
protected by the ARCH_HAS_MMIO_FLUSH Kconfig variable, and is currently
only supported on x86.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-08-27 19:38:28 -04:00
Robert Jarzmik f8bcbe62ac lib: scatterlist: add sg splitting function
Sometimes a scatter-gather has to be split into several chunks, or sub
scatter lists. This happens for example if a scatter list will be
handled by multiple DMA channels, each one filling a part of it.

A concrete example comes with the media V4L2 API, where the scatter list
is allocated from userspace to hold an image, regardless of the
knowledge of how many DMAs will fill it :
 - in a simple RGB565 case, one DMA will pump data from the camera ISP
   to memory
 - in the trickier YUV422 case, 3 DMAs will pump data from the camera
   ISP pipes, one for pipe Y, one for pipe U and one for pipe V

For these cases, it is necessary to split the original scatter list into
multiple scatter lists, which is the purpose of this patch.

The guarantees that are required for this patch are :
 - the intersection of spans of any couple of resulting scatter lists is
   empty.
 - the union of spans of all resulting scatter lists is a subrange of
   the span of the original scatter list.
 - streaming DMA API operations (mapping, unmapping) should not happen
   both on both the resulting and the original scatter list. It's either
   the first or the later ones.
 - the caller is reponsible to call kfree() on the resulting
   scatterlists.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-24 14:28:01 -06:00
Johannes Berg f4e774f55f average: remove out-of-line implementation
Since all users are now converted to the inline implementation,
remove the out-of-line implementation entirely.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-20 14:10:23 -07:00
Oleg Nesterov bf3eac84c4 percpu-rwsem: kill CONFIG_PERCPU_RWSEM
Remove CONFIG_PERCPU_RWSEM, the next patch adds the unconditional
user of percpu_rw_semaphore.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
2015-08-15 13:52:11 +02:00
Linus Torvalds 88793e5c77 The libnvdimm sub-system introduces, in addition to the libnvdimm-core,
4 drivers / enabling modules:
 
 NFIT:
 Instantiates an "nvdimm bus" with the core and registers memory devices
 (NVDIMMs) enumerated by the ACPI 6.0 NFIT (NVDIMM Firmware Interface
 table).  After registering NVDIMMs the NFIT driver then registers
 "region" devices.  A libnvdimm-region defines an access mode and the
 boundaries of persistent memory media.  A region may span multiple
 NVDIMMs that are interleaved by the hardware memory controller.  In
 turn, a libnvdimm-region can be carved into a "namespace" device and
 bound to the PMEM or BLK driver which will attach a Linux block device
 (disk) interface to the memory.
 
 PMEM:
 Initially merged in v4.1 this driver for contiguous spans of persistent
 memory address ranges is re-worked to drive PMEM-namespaces emitted by
 the libnvdimm-core.  In this update the PMEM driver, on x86, gains the
 ability to assert that writes to persistent memory have been flushed all
 the way through the caches and buffers in the platform to persistent
 media.  See memcpy_to_pmem() and wmb_pmem().
 
 BLK:
 This new driver enables access to persistent memory media through "Block
 Data Windows" as defined by the NFIT.  The primary difference of this
 driver to PMEM is that only a small window of persistent memory is
 mapped into system address space at any given point in time.  Per-NVDIMM
 windows are reprogrammed at run time, per-I/O, to access different
 portions of the media.  BLK-mode, by definition, does not support DAX.
 
 BTT:
 This is a library, optionally consumed by either PMEM or BLK, that
 converts a byte-accessible namespace into a disk with atomic sector
 update semantics (prevents sector tearing on crash or power loss).  The
 sinister aspect of sector tearing is that most applications do not know
 they have a atomic sector dependency.  At least today's disk's rarely
 ever tear sectors and if they do one almost certainly gets a CRC error
 on access.  NVDIMMs will always tear and always silently.  Until an
 application is audited to be robust in the presence of sector-tearing
 the usage of BTT is recommended.
 
 Thanks to: Ross Zwisler, Jeff Moyer, Vishal Verma, Christoph Hellwig,
 Ingo Molnar, Neil Brown, Boaz Harrosh, Robert Elliott, Matthew Wilcox,
 Andy Rudoff, Linda Knippers, Toshi Kani, Nicholas Moulin, Rafael
 Wysocki, and Bob Moore.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVjZGBAAoJEB7SkWpmfYgC4fkP/j+k6HmSRNU/yRYPyo7CAWvj
 3P5P1i6R6nMZZbjQrQArAXaIyLlFk4sEQDYsciR6dmslhhFZAkR2eFwVO5rBOyx3
 QN0yxEpyjJbroRFUrV/BLaFK4cq2oyJAFFHs0u7/pLHBJ4MDMqfRKAMtlnBxEkTE
 LFcqXapSlvWitSbjMdIBWKFEvncaiJ2mdsFqT4aZqclBBTj00eWQvEG9WxleJLdv
 +tj7qR/vGcwOb12X5UrbQXgwtMYos7A6IzhHbqwQL8IrOcJ6YB8NopJUpLDd7ZVq
 KAzX6ZYMzNueN4uvv6aDfqDRLyVL7qoxM9XIjGF5R8SV9sF2LMspm1FBpfowo1GT
 h2QMr0ky1nHVT32yspBCpE9zW/mubRIDtXxEmZZ53DIc4N6Dy9jFaNVmhoWtTAqG
 b9pndFnjUzzieCjX5pCvo2M5U6N0AQwsnq76/CasiWyhSa9DNKOg8MVDRg0rbxb0
 UvK0v8JwOCIRcfO3qiKcx+02nKPtjCtHSPqGkFKPySRvAdb+3g6YR26CxTb3VmnF
 etowLiKU7HHalLvqGFOlDoQG6viWes9Zl+ZeANBOCVa6rL2O7ZnXJtYgXf1wDQee
 fzgKB78BcDjXH4jHobbp/WBANQGN/GF34lse8yHa7Ym+28uEihDvSD1wyNLnefmo
 7PJBbN5M5qP5tD0aO7SZ
 =VtWG
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm

Pull libnvdimm subsystem from Dan Williams:
 "The libnvdimm sub-system introduces, in addition to the
  libnvdimm-core, 4 drivers / enabling modules:

  NFIT:
    Instantiates an "nvdimm bus" with the core and registers memory
    devices (NVDIMMs) enumerated by the ACPI 6.0 NFIT (NVDIMM Firmware
    Interface table).

    After registering NVDIMMs the NFIT driver then registers "region"
    devices.  A libnvdimm-region defines an access mode and the
    boundaries of persistent memory media.  A region may span multiple
    NVDIMMs that are interleaved by the hardware memory controller.  In
    turn, a libnvdimm-region can be carved into a "namespace" device and
    bound to the PMEM or BLK driver which will attach a Linux block
    device (disk) interface to the memory.

  PMEM:
    Initially merged in v4.1 this driver for contiguous spans of
    persistent memory address ranges is re-worked to drive
    PMEM-namespaces emitted by the libnvdimm-core.

    In this update the PMEM driver, on x86, gains the ability to assert
    that writes to persistent memory have been flushed all the way
    through the caches and buffers in the platform to persistent media.
    See memcpy_to_pmem() and wmb_pmem().

  BLK:
    This new driver enables access to persistent memory media through
    "Block Data Windows" as defined by the NFIT.  The primary difference
    of this driver to PMEM is that only a small window of persistent
    memory is mapped into system address space at any given point in
    time.

    Per-NVDIMM windows are reprogrammed at run time, per-I/O, to access
    different portions of the media.  BLK-mode, by definition, does not
    support DAX.

  BTT:
    This is a library, optionally consumed by either PMEM or BLK, that
    converts a byte-accessible namespace into a disk with atomic sector
    update semantics (prevents sector tearing on crash or power loss).

    The sinister aspect of sector tearing is that most applications do
    not know they have a atomic sector dependency.  At least today's
    disk's rarely ever tear sectors and if they do one almost certainly
    gets a CRC error on access.  NVDIMMs will always tear and always
    silently.  Until an application is audited to be robust in the
    presence of sector-tearing the usage of BTT is recommended.

  Thanks to: Ross Zwisler, Jeff Moyer, Vishal Verma, Christoph Hellwig,
  Ingo Molnar, Neil Brown, Boaz Harrosh, Robert Elliott, Matthew Wilcox,
  Andy Rudoff, Linda Knippers, Toshi Kani, Nicholas Moulin, Rafael
  Wysocki, and Bob Moore"

* tag 'libnvdimm-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm: (33 commits)
  arch, x86: pmem api for ensuring durability of persistent memory updates
  libnvdimm: Add sysfs numa_node to NVDIMM devices
  libnvdimm: Set numa_node to NVDIMM devices
  acpi: Add acpi_map_pxm_to_online_node()
  libnvdimm, nfit: handle unarmed dimms, mark namespaces read-only
  pmem: flag pmem block devices as non-rotational
  libnvdimm: enable iostat
  pmem: make_request cleanups
  libnvdimm, pmem: fix up max_hw_sectors
  libnvdimm, blk: add support for blk integrity
  libnvdimm, btt: add support for blk integrity
  fs/block_dev.c: skip rw_page if bdev has integrity
  libnvdimm: Non-Volatile Devices
  tools/testing/nvdimm: libnvdimm unit test infrastructure
  libnvdimm, nfit, nd_blk: driver for BLK-mode access persistent memory
  nd_btt: atomic sector updates
  libnvdimm: infrastructure for btt devices
  libnvdimm: write blk label set
  libnvdimm: write pmem label set
  libnvdimm: blk labels and namespace instantiation
  ...
2015-06-29 10:34:42 -07:00
Ross Zwisler 61031952f4 arch, x86: pmem api for ensuring durability of persistent memory updates
Based on an original patch by Ross Zwisler [1].

Writes to persistent memory have the potential to be posted to cpu
cache, cpu write buffers, and platform write buffers (memory controller)
before being committed to persistent media.  Provide apis,
memcpy_to_pmem(), wmb_pmem(), and memremap_pmem(), to write data to
pmem and assert that it is durable in PMEM (a persistent linear address
range).  A '__pmem' attribute is added so sparse can track proper usage
of pointers to pmem.

This continues the status quo of pmem being x86 only for 4.2, but
reworks to ioremap, and wider implementation of memremap() will enable
other archs in 4.3.

[1]: https://lists.01.org/pipermail/linux-nvdimm/2015-May/000932.html

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
[djbw: various reworks]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-06-26 11:23:38 -04:00
Herbert Xu c0b59fafe3 Merge branch 'mvebu/drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Merge the mvebu/drivers branch of the arm-soc tree which contains
just a single patch bfa1ce5f38 ("bus:
mvebu-mbus: add mv_mbus_dram_info_nooverlap()") that happens to be
a prerequisite of the new marvell/cesa crypto driver.
2015-06-19 22:07:07 +08:00
Dan Streetman 2da572c959 lib: add software 842 compression/decompression
Add 842-format software compression and decompression functions.
Update the MAINTAINERS 842 section to include the new files.

The 842 compression function can compress any input data into the 842
compression format.  The 842 decompression function can decompress any
standard-format 842 compressed data - specifically, either a compressed
data buffer created by the 842 software compression function, or a
compressed data buffer created by the 842 hardware compressor (located
in PowerPC coprocessors).

The 842 compressed data format is explained in the header comments.

This is used in a later patch to provide a full software 842 compression
and decompression crypto interface.

Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-11 15:06:43 +08:00
Linus Torvalds 6496edfce9 This is the final removal (after several years!) of the obsolete cpus_*
functions, prompted by their mis-use in staging.
 
 With these function removed, all cpu functions should only iterate to
 nr_cpu_ids, so we finally only allocate that many bits when cpumasks
 are allocated offstack.
 
 Thanks,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVNPMuAAoJENkgDmzRrbjx7ZIP/j65e6xs1jEyXR3WOYSdTU1x
 bMo6JcII6O1oEZLgyKXgx9KiBg6uIIDta1NG/H/XIe354dwfHVsHvj5HHHQR5Xof
 iRrjLOaHj4XglI3hvsk0eEEl3/OBBLgyo9bUwDvMF1fmr/9tW4caMs3Op6n7Evzm
 YIvoAyeJ0A8BfEtOU5lXhcVIGmnHtSw0x6mdGXpXIBmWYQPCtdQP868s4lnl44w0
 bSNpAYdzEqg64Ph3SK0prgWPrn5+5EiaAhV7HZzENZ5+o0DAdIXWq/W7uHyCWPKH
 536cJDojec+nSUQkPYngngGprxrKO02aBcMw/3JGJ0tdCDj8yw3XAyVAFzz4hmMb
 Lkmyv4QHHIILLvJ4ZRH5KHWCjjVBg41LNCs2H3HnoxFACdm0lZYKHsUAh2ucBVtU
 Wb/eHmLxOG43UIkpX4yrhy3SfE1ZdnOVzEzOzPXtr51t8ojqk+bLFe/hJ6EkzrQX
 X+90qHfBq+PMJlAnc3zdXHjxoJrL6KPWVwVvFrNeibgEKtVvy/BiwZkS6QceC1Ea
 TatOYA5r6awFVHHQCooN1DGAxN5Juvu2SmdnTUA9ymsCNDghj1YUoAKRNP81u8Sa
 pe3hco/63iCuPna+vlwNDU6SgsaMk9m0p+1n1BiDIfVJIkWYCNeG+u2gQkzbDKlQ
 AJuKKQv1QuZiF0ylZ0wq
 =VAgA
 -----END PGP SIGNATURE-----

Merge tag 'cpumask-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull final removal of deprecated cpus_* cpumask functions from Rusty Russell:
 "This is the final removal (after several years!) of the obsolete
  cpus_* functions, prompted by their mis-use in staging.

  With these function removed, all cpu functions should only iterate to
  nr_cpu_ids, so we finally only allocate that many bits when cpumasks
  are allocated offstack"

* tag 'cpumask-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (25 commits)
  cpumask: remove __first_cpu / __next_cpu
  cpumask: resurrect CPU_MASK_CPU0
  linux/cpumask.h: add typechecking to cpumask_test_cpu
  cpumask: only allocate nr_cpumask_bits.
  Fix weird uses of num_online_cpus().
  cpumask: remove deprecated functions.
  mips: fix obsolete cpumask_of_cpu usage.
  x86: fix more deprecated cpu function usage.
  ia64: remove deprecated cpus_ usage.
  powerpc: fix deprecated CPU_MASK_CPU0 usage.
  CPU_MASK_ALL/CPU_MASK_NONE: remove from deprecated region.
  staging/lustre/o2iblnd: Don't use cpus_weight
  staging/lustre/libcfs: replace deprecated cpus_ calls with cpumask_
  staging/lustre/ptlrpc: Do not use deprecated cpus_* functions
  blackfin: fix up obsolete cpu function usage.
  parisc: fix up obsolete cpu function usage.
  tile: fix up obsolete cpu function usage.
  arm64: fix up obsolete cpu function usage.
  mips: fix up obsolete cpu function usage.
  x86: fix up obsolete cpu function usage.
  ...
2015-04-20 10:19:03 -07:00
Andrew Morton 9e522c0d28 lib/Kconfig: fix up HAVE_ARCH_BITREVERSE help text
Cc: Yalin Wang <yalin.wang@sonymobile.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17 09:04:10 -04:00
Rusty Russell 2f0f267ea0 cpumask: remove deprecated functions.
Using these functions with offstack cpus is unsafe.  They use all NR_CPUS
bits, unstead of nr_cpumask_bits.

In particular, lustre (in staging) used cpus_ and that caused a bug.

Reported-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2015-03-10 13:54:41 +10:30
Linus Torvalds b11a278397 Merge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kconfig updates from Michal Marek:
 "Yann E Morin was supposed to take over kconfig maintainership, but
  this hasn't happened.  So I'm sending a few kconfig patches that I
  collected:

   - Fix for missing va_end in kconfig
   - merge_config.sh displays used if given too few arguments
   - s/boolean/bool/ in Kconfig files for consistency, with the plan to
     only support bool in the future"

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kconfig: use va_end to match corresponding va_start
  merge_config.sh: Display usage if given too few arguments
  kconfig: use bool instead of boolean for type definition attributes
2015-02-19 10:36:45 -08:00
Christoph Jaeger 841c009007 lib/Kconfig: use bool instead of boolean
Keyword 'boolean' for type definition attributes is considered
deprecated and, therefore, should not be used anymore.

See http://lkml.kernel.org/r/cover.1418003065.git.cj@linux.com
See http://lkml.kernel.org/r/1419108071-11607-1-git-send-email-cj@linux.com

Signed-off-by: Christoph Jaeger <cj@linux.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-16 17:56:05 -08:00
Christoph Jaeger 6341e62b21 kconfig: use bool instead of boolean for type definition attributes
Support for keyword 'boolean' will be dropped later on.

No functional change.

Reference: http://lkml.kernel.org/r/cover.1418003065.git.cj@linux.com
Signed-off-by: Christoph Jaeger <cj@linux.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-01-07 13:08:04 +01:00
Yalin Wang 556d2f055b ARM: 8187/1: add CONFIG_HAVE_ARCH_BITREVERSE to support rbit instruction
this change add CONFIG_HAVE_ARCH_BITREVERSE config option,
so that we can use some architecture's bitrev hardware instruction
to do bitrev operation.

Introduce __constant_bitrev* macro for constant bitrev operation.

Change __bitrev16() __bitrev32() to be inline function,
don't need export symbol for these tiny functions.

Signed-off-by: Yalin Wang <yalin.wang@sonymobile.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-12-22 16:43:06 +00:00
Linus Torvalds 72d9310460 Make ARCH_HAS_FAST_MULTIPLIER a real config variable
It used to be an ad-hoc hack defined by the x86 version of
<asm/bitops.h> that enabled a couple of library routines to know whether
an integer multiply is faster than repeated shifts and additions.

This just makes it use the real Kconfig system instead, and makes x86
(which was the only architecture that did this) select the option.

NOTE! Even for x86, this really is kind of wrong.  If we cared, we would
probably not enable this for builds optimized for netburst (P4), where
shifts-and-adds are generally faster than multiplies.  This patch does
*not* change that kind of logic, though, it is purely a syntactic change
with no code changes.

This was triggered by the fact that we have other places that really
want to know "do I want to expand multiples by constants by hand or
not", particularly the hash generation code.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-13 11:14:53 -07:00
Laura Abbott 308c09f17d lib/scatterlist: make ARCH_HAS_SG_CHAIN an actual Kconfig
Rather than have architectures #define ARCH_HAS_SG_CHAIN in an
architecture specific scatterlist.h, make it a proper Kconfig option and
use that instead.  At same time, remove the header files are are now
mostly useless and just include asm-generic/scatterlist.h.

[sfr@canb.auug.org.au: powerpc files now need asm/dma.h]
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>			[x86]
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>	[powerpc]
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:57:26 -07:00
George Spelvin 5f9be8248d lib/glob.c: add CONFIG_GLOB_SELFTEST
This was useful during development, and is retained for future
regression testing.

GCC appears to have no way to place string literals in a particular
section; adding __initconst to a char pointer leaves the string itself
in the default string section, where it will not be thrown away after
module load.

Thus all string constants are kept in explicitly declared and named
arrays.  Sorry this makes printk a bit harder to read.  At least the
tests are more compact.

Signed-off-by: George Spelvin <linux@horizon.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:25 -07:00
George Spelvin b01250856b lib: add lib/glob.c
This is a helper function from drivers/ata/libata_core.c, where it is
used to blacklist particular device models.  It's being moved to lib/ so
other drivers may use it for the same purpose.

This implementation in non-recursive, so is safe for the kernel stack.

[akpm@linux-foundation.org: fix sparse warning]
Signed-off-by: George Spelvin <linux@horizon.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:24 -07:00
Dmitry Kasatkin 0d1f64f60b digsig: make crypto builtin if digsig selected as builtin
When SIGNATURE=y but depends on CRYPTO=m, it selects MPILIB as module
producing build break. This patch makes digsig to select crypto for
correcting dependency.

Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2014-07-17 21:01:28 +01:00
Chris Wilson a88cc108f6 lib: Export interval_tree
lib/interval_tree.c provides a simple interface for an interval-tree
(an augmented red-black tree) but is only built when testing the generic
macros for building interval-trees. For drivers with modest needs,
export the simple interval-tree library as is.

v2: Lots of help from Michel Lespinasse to only compile the code
    as required:
    - make INTERVAL_TREE a config option
    - make INTERVAL_TREE_TEST select the library functions
      and sanitize the filenames & Makefile
    - prepare interval_tree for being built as a module if required

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Michel Lespinasse <walken@google.com>
[Acked for inclusion via drm/i915 by Andrew Morton.]
[danvet: switch to _GPL as per the mailing list discussion.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-05 09:09:14 +02:00
Linus Torvalds 0b747172dc Merge git://git.infradead.org/users/eparis/audit
Pull audit updates from Eric Paris.

* git://git.infradead.org/users/eparis/audit: (28 commits)
  AUDIT: make audit_is_compat depend on CONFIG_AUDIT_COMPAT_GENERIC
  audit: renumber AUDIT_FEATURE_CHANGE into the 1300 range
  audit: do not cast audit_rule_data pointers pointlesly
  AUDIT: Allow login in non-init namespaces
  audit: define audit_is_compat in kernel internal header
  kernel: Use RCU_INIT_POINTER(x, NULL) in audit.c
  sched: declare pid_alive as inline
  audit: use uapi/linux/audit.h for AUDIT_ARCH declarations
  syscall_get_arch: remove useless function arguments
  audit: remove stray newline from audit_log_execve_info() audit_panic() call
  audit: remove stray newlines from audit_log_lost messages
  audit: include subject in login records
  audit: remove superfluous new- prefix in AUDIT_LOGIN messages
  audit: allow user processes to log from another PID namespace
  audit: anchor all pid references in the initial pid namespace
  audit: convert PPIDs to the inital PID namespace.
  pid: get pid_t ppid of task in init_pid_ns
  audit: rename the misleading audit_get_context() to audit_take_context()
  audit: Add generic compat syscall support
  audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL
  ...
2014-04-12 12:38:53 -07:00
Uwe Kleine-König ce816fa88c Kconfig: rename HAS_IOPORT to HAS_IOPORT_MAP
If the renamed symbol is defined lib/iomap.c implements ioport_map and
ioport_unmap and currently (nearly) all platforms define the port
accessor functions outb/inb and friend unconditionally.  So
HAS_IOPORT_MAP is the better name for this.

Consequently NO_IOPORT is renamed to NO_IOPORT_MAP.

The motivation for this change is to reintroduce a symbol HAS_IOPORT
that signals if outb/int et al are available.  I will address that at
least one merge window later though to keep surprises to a minimum and
catch new introductions of (HAS|NO)_IOPORT.

The changes in this commit were done using:

	$ git grep -l -E '(NO|HAS)_IOPORT' | xargs perl -p -i -e 's/\b((?:CONFIG_)?(?:NO|HAS)_IOPORT)\b/$1_MAP/'

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:11 -07:00
AKASHI Takahiro 4b58841149 audit: Add generic compat syscall support
lib/audit.c provides a generic function for auditing system calls.
This patch extends it for compat syscall support on bi-architectures
(32/64-bit) by adding lib/compat_audit.c.
What is required to support this feature are:
 * add asm/unistd32.h for compat system call names
 * select CONFIG_AUDIT_ARCH_COMPAT_GENERIC

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-03-20 10:11:35 -04:00
Linus Torvalds 78dc53c422 Merge branch 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
 "In this patchset, we finally get an SELinux update, with Paul Moore
  taking over as maintainer of that code.

  Also a significant update for the Keys subsystem, as well as
  maintenance updates to Smack, IMA, TPM, and Apparmor"

and since I wanted to know more about the updates to key handling,
here's the explanation from David Howells on that:

 "Okay.  There are a number of separate bits.  I'll go over the big bits
  and the odd important other bit, most of the smaller bits are just
  fixes and cleanups.  If you want the small bits accounting for, I can
  do that too.

   (1) Keyring capacity expansion.

        KEYS: Consolidate the concept of an 'index key' for key access
        KEYS: Introduce a search context structure
        KEYS: Search for auth-key by name rather than target key ID
        Add a generic associative array implementation.
        KEYS: Expand the capacity of a keyring

     Several of the patches are providing an expansion of the capacity of a
     keyring.  Currently, the maximum size of a keyring payload is one page.
     Subtract a small header and then divide up into pointers, that only gives
     you ~500 pointers on an x86_64 box.  However, since the NFS idmapper uses
     a keyring to store ID mapping data, that has proven to be insufficient to
     the cause.

     Whatever data structure I use to handle the keyring payload, it can only
     store pointers to keys, not the keys themselves because several keyrings
     may point to a single key.  This precludes inserting, say, and rb_node
     struct into the key struct for this purpose.

     I could make an rbtree of records such that each record has an rb_node
     and a key pointer, but that would use four words of space per key stored
     in the keyring.  It would, however, be able to use much existing code.

     I selected instead a non-rebalancing radix-tree type approach as that
     could have a better space-used/key-pointer ratio.  I could have used the
     radix tree implementation that we already have and insert keys into it by
     their serial numbers, but that means any sort of search must iterate over
     the whole radix tree.  Further, its nodes are a bit on the capacious side
     for what I want - especially given that key serial numbers are randomly
     allocated, thus leaving a lot of empty space in the tree.

     So what I have is an associative array that internally is a radix-tree
     with 16 pointers per node where the index key is constructed from the key
     type pointer and the key description.  This means that an exact lookup by
     type+description is very fast as this tells us how to navigate directly to
     the target key.

     I made the data structure general in lib/assoc_array.c as far as it is
     concerned, its index key is just a sequence of bits that leads to a
     pointer.  It's possible that someone else will be able to make use of it
     also.  FS-Cache might, for example.

   (2) Mark keys as 'trusted' and keyrings as 'trusted only'.

        KEYS: verify a certificate is signed by a 'trusted' key
        KEYS: Make the system 'trusted' keyring viewable by userspace
        KEYS: Add a 'trusted' flag and a 'trusted only' flag
        KEYS: Separate the kernel signature checking keyring from module signing

     These patches allow keys carrying asymmetric public keys to be marked as
     being 'trusted' and allow keyrings to be marked as only permitting the
     addition or linkage of trusted keys.

     Keys loaded from hardware during kernel boot or compiled into the kernel
     during build are marked as being trusted automatically.  New keys can be
     loaded at runtime with add_key().  They are checked against the system
     keyring contents and if their signatures can be validated with keys that
     are already marked trusted, then they are marked trusted also and can
     thus be added into the master keyring.

     Patches from Mimi Zohar make this usable with the IMA keyrings also.

   (3) Remove the date checks on the key used to validate a module signature.

        X.509: Remove certificate date checks

     It's not reasonable to reject a signature just because the key that it was
     generated with is no longer valid datewise - especially if the kernel
     hasn't yet managed to set the system clock when the first module is
     loaded - so just remove those checks.

   (4) Make it simpler to deal with additional X.509 being loaded into the kernel.

        KEYS: Load *.x509 files into kernel keyring
        KEYS: Have make canonicalise the paths of the X.509 certs better to deduplicate

     The builder of the kernel now just places files with the extension ".x509"
     into the kernel source or build trees and they're concatenated by the
     kernel build and stuffed into the appropriate section.

   (5) Add support for userspace kerberos to use keyrings.

        KEYS: Add per-user_namespace registers for persistent per-UID kerberos caches
        KEYS: Implement a big key type that can save to tmpfs

     Fedora went to, by default, storing kerberos tickets and tokens in tmpfs.
     We looked at storing it in keyrings instead as that confers certain
     advantages such as tickets being automatically deleted after a certain
     amount of time and the ability for the kernel to get at these tokens more
     easily.

     To make this work, two things were needed:

     (a) A way for the tickets to persist beyond the lifetime of all a user's
         sessions so that cron-driven processes can still use them.

         The problem is that a user's session keyrings are deleted when the
         session that spawned them logs out and the user's user keyring is
         deleted when the UID is deleted (typically when the last log out
         happens), so neither of these places is suitable.

         I've added a system keyring into which a 'persistent' keyring is
         created for each UID on request.  Each time a user requests their
         persistent keyring, the expiry time on it is set anew.  If the user
         doesn't ask for it for, say, three days, the keyring is automatically
         expired and garbage collected using the existing gc.  All the kerberos
         tokens it held are then also gc'd.

     (b) A key type that can hold really big tickets (up to 1MB in size).

         The problem is that Active Directory can return huge tickets with lots
         of auxiliary data attached.  We don't, however, want to eat up huge
         tracts of unswappable kernel space for this, so if the ticket is
         greater than a certain size, we create a swappable shmem file and dump
         the contents in there and just live with the fact we then have an
         inode and a dentry overhead.  If the ticket is smaller than that, we
         slap it in a kmalloc()'d buffer"

* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (121 commits)
  KEYS: Fix keyring content gc scanner
  KEYS: Fix error handling in big_key instantiation
  KEYS: Fix UID check in keyctl_get_persistent()
  KEYS: The RSA public key algorithm needs to select MPILIB
  ima: define '_ima' as a builtin 'trusted' keyring
  ima: extend the measurement list to include the file signature
  kernel/system_certificate.S: use real contents instead of macro GLOBAL()
  KEYS: fix error return code in big_key_instantiate()
  KEYS: Fix keyring quota misaccounting on key replacement and unlink
  KEYS: Fix a race between negating a key and reading the error set
  KEYS: Make BIG_KEYS boolean
  apparmor: remove the "task" arg from may_change_ptraced_domain()
  apparmor: remove parent task info from audit logging
  apparmor: remove tsk field from the apparmor_audit_struct
  apparmor: fix capability to not use the current task, during reporting
  Smack: Ptrace access check mode
  ima: provide hash algo info in the xattr
  ima: enable support for larger default filedata hash algorithms
  ima: define kernel parameter 'ima_template=' to change configured default
  ima: add Kconfig default measurement list template
  ...
2013-11-21 19:46:00 -08:00
Peter Zijlstra 57f4257eae lockref: use BLOATED_SPINLOCKS to avoid explicit config dependencies
Avoid the fragile Kconfig construct guestimating spinlock_t sizes; use a
friendly compile-time test to determine this.

[kirill.shutemov@linux.intel.com: drop CONFIG_CMPXCHG_LOCKREF]
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15 09:32:20 +09:00
Daniel Borkmann a6a9c0f1bf random32: add test cases for taus113 implementation
We generated a battery of 100 test cases from GSL taus113 implemention
and compare the results from a particular seed and a particular
iteration with our implementation in the kernel. We have verified on
32 and 64 bit machines that our taus113 kernel implementation gives
same results as GSL taus113 implementation:

  [    0.147370] prandom: seed boundary self test passed
  [    0.148078] prandom: 100 self tests passed

This is a Kconfig option that is disabled on default, just like the
crc32 init selftests in order to not unnecessary slow down boot process.
We also refactored out prandom_seed_very_weak() as it's now used in
multiple places in order to reduce redundant code.

GSL code we used for generating test cases:

  int i, j;
  srand(time(NULL));
  for (i = 0; i < 100; ++i) {
    int iteration = 500 + (rand() % 500);
    gsl_rng_default_seed = rand() + 1;
    gsl_rng *r = gsl_rng_alloc(gsl_rng_taus113);
    printf("\t{ %lu, ", gsl_rng_default_seed);
    for (j = 0; j < iteration - 1; ++j)
      gsl_rng_get(r);
    printf("%u, %lu },\n", iteration, gsl_rng_get(r));
    gsl_rng_free(r);
  }

Joint work with Hannes Frederic Sowa.

Cc: Florian Weimer <fweimer@redhat.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-11 14:32:15 -05:00
David Howells 3cb989501c Add a generic associative array implementation.
Add a generic associative array implementation that can be used as the
container for keyrings, thereby massively increasing the capacity available
whilst also speeding up searching in keyrings that contain a lot of keys.

This may also be useful in FS-Cache for tracking cookies.

Documentation is added into Documentation/associative_array.txt

Some of the properties of the implementation are:

 (1) Objects are opaque pointers.  The implementation does not care where they
     point (if anywhere) or what they point to (if anything).

     [!] NOTE: Pointers to objects _must_ be zero in the two least significant
     	       bits.

 (2) Objects do not need to contain linkage blocks for use by the array.  This
     permits an object to be located in multiple arrays simultaneously.
     Rather, the array is made up of metadata blocks that point to objects.

 (3) Objects are labelled as being one of two types (the type is a bool value).
     This information is stored in the array, but has no consequence to the
     array itself or its algorithms.

 (4) Objects require index keys to locate them within the array.

 (5) Index keys must be unique.  Inserting an object with the same key as one
     already in the array will replace the old object.

 (6) Index keys can be of any length and can be of different lengths.

 (7) Index keys should encode the length early on, before any variation due to
     length is seen.

 (8) Index keys can include a hash to scatter objects throughout the array.

 (9) The array can iterated over.  The objects will not necessarily come out in
     key order.

(10) The array can be iterated whilst it is being modified, provided the RCU
     readlock is being held by the iterator.  Note, however, under these
     circumstances, some objects may be seen more than once.  If this is a
     problem, the iterator should lock against modification.  Objects will not
     be missed, however, unless deleted.

(11) Objects in the array can be looked up by means of their index key.

(12) Objects can be looked up whilst the array is being modified, provided the
     RCU readlock is being held by the thread doing the look up.

The implementation uses a tree of 16-pointer nodes internally that are indexed
on each level by nibbles from the index key.  To improve memory efficiency,
shortcuts can be emplaced to skip over what would otherwise be a series of
single-occupancy nodes.  Further, nodes pack leaf object pointers into spare
space in the node rather than making an extra branch until as such time an
object needs to be added to a full node.

Signed-off-by: David Howells <dhowells@redhat.com>
2013-09-24 10:35:17 +01:00
Linus Torvalds 6be48f2940 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
 "Here is the crypto update for 3.12:

   - Added MODULE_SOFTDEP to allow pre-loading of modules.
   - Reinstated crct10dif driver using the module softdep feature.
   - Allow via rng driver to be auto-loaded.

   - Split large input data when necessary in nx.
   - Handle zero length messages correctly for GCM/XCBC in nx.
   - Handle SHA-2 chunks bigger than block size properly in nx.

   - Handle unaligned lengths in omap-aes.
   - Added SHA384/SHA512 to omap-sham.
   - Added OMAP5/AM43XX SHAM support.
   - Added OMAP4 TRNG support.

   - Misc fixes"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (66 commits)
  Reinstate "crypto: crct10dif - Wrap crc_t10dif function all to use crypto transform framework"
  hwrng: via - Add MODULE_DEVICE_TABLE
  crypto: fcrypt - Fix bitoperation for compilation with clang
  crypto: nx - fix SHA-2 for chunks bigger than block size
  crypto: nx - fix GCM for zero length messages
  crypto: nx - fix XCBC for zero length messages
  crypto: nx - fix limits to sg lists for AES-CCM
  crypto: nx - fix limits to sg lists for AES-XCBC
  crypto: nx - fix limits to sg lists for AES-GCM
  crypto: nx - fix limits to sg lists for AES-CTR
  crypto: nx - fix limits to sg lists for AES-CBC
  crypto: nx - fix limits to sg lists for AES-ECB
  crypto: nx - add offset to nx_build_sg_lists()
  padata - Register hotcpu notifier after initialization
  padata - share code between CPU_ONLINE and CPU_DOWN_FAILED, same to CPU_DOWN_PREPARE and CPU_UP_CANCELED
  hwrng: omap - reorder OMAP TRNG driver code
  crypto: omap-sham - correct dma burst size
  crypto: omap-sham - Enable Polling mode if DMA fails
  crypto: tegra-aes - bitwise vs logical and
  crypto: sahara - checking the wrong variable
  ...
2013-09-07 14:31:18 -07:00
Herbert Xu 68411521cc Reinstate "crypto: crct10dif - Wrap crc_t10dif function all to use crypto transform framework"
This patch reinstates commits
	67822649d7
	39761214ee
	0b95a7f857
	31d939625a
	2d31e518a4

Now that module softdeps are in the kernel we can use that to resolve
the boot issue which cause the revert.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-09-07 12:56:26 +10:00
Linus Torvalds bc08b449ee lockref: implement lockless reference count updates using cmpxchg()
Instead of taking the spinlock, the lockless versions atomically check
that the lock is not taken, and do the reference count update using a
cmpxchg() loop.  This is semantically identical to doing the reference
count update protected by the lock, but avoids the "wait for lock"
contention that you get when accesses to the reference count are
contended.

Note that a "lockref" is absolutely _not_ equivalent to an atomic_t.
Even when the lockref reference counts are updated atomically with
cmpxchg, the fact that they also verify the state of the spinlock means
that the lockless updates can never happen while somebody else holds the
spinlock.

So while "lockref_put_or_lock()" looks a lot like just another name for
"atomic_dec_and_lock()", and both optimize to lockless updates, they are
fundamentally different: the decrement done by atomic_dec_and_lock() is
truly independent of any lock (as long as it doesn't decrement to zero),
so a locked region can still see the count change.

The lockref structure, in contrast, really is a *locked* reference
count.  If you hold the spinlock, the reference count will be stable and
you can modify the reference count without using atomics, because even
the lockless updates will see and respect the state of the lock.

In order to enable the cmpxchg lockless code, the architecture needs to
do three things:

 (1) Make sure that the "arch_spinlock_t" and an "unsigned int" can fit
     in an aligned u64, and have a "cmpxchg()" implementation that works
     on such a u64 data type.

 (2) define a helper function to test for a spinlock being unlocked
     ("arch_spin_value_unlocked()")

 (3) select the "ARCH_USE_CMPXCHG_LOCKREF" config variable in its
     Kconfig file.

This enables it for x86-64 (but not 32-bit, we'd need to make sure
cmpxchg() turns into the proper cmpxchg8b in order to enable it for
32-bit mode).

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-02 12:12:15 -07:00
Linus Torvalds b48a97be8e Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
 "This push fixes a memory corruption issue in caam, as well as
  reverting the new optimised crct10dif implementation as it breaks boot
  on initrd systems.

  Hopefully crct10dif will be reinstated once the supporting code is
  added so that it doesn't break boot"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  Revert "crypto: crct10dif - Wrap crc_t10dif function all to use crypto transform framework"
  crypto: caam - Fixed the memory out of bound overwrite issue
2013-07-24 11:05:18 -07:00
Herbert Xu e70308ec0e Revert "crypto: crct10dif - Wrap crc_t10dif function all to use crypto transform framework"
This reverts commits
    67822649d7
    39761214ee
    0b95a7f857
    31d939625a
    2d31e518a4

Unfortunately this change broke boot on some systems that used an
initrd which does not include the newly created crct10dif modules.
As these modules are required by sd_mod under certain configurations
this is a serious problem.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-07-24 17:04:16 +10:00
Chanho Min c72ac7a1a9 lib: add lz4 compressor module
This patchset is for supporting LZ4 compression and the crypto API using
it.

As shown below, the size of data is a little bit bigger but compressing
speed is faster under the enabled unaligned memory access.  We can use
lz4 de/compression through crypto API as well.  Also, It will be useful
for another potential user of lz4 compression.

lz4 Compression Benchmark:
Compiler: ARM gcc 4.6.4
ARMv7, 1 GHz based board
   Kernel: linux 3.4
   Uncompressed data Size: 101 MB
         Compressed Size  compression Speed
   LZO   72.1MB		  32.1MB/s, 33.0MB/s(UA)
   LZ4   75.1MB		  30.4MB/s, 35.9MB/s(UA)
   LZ4HC 59.8MB		   2.4MB/s,  2.5MB/s(UA)
- UA: Unaligned memory Access support
- Latest patch set for LZO applied

This patch:

Add support for LZ4 compression in the Linux Kernel.  LZ4 Compression APIs
for kernel are based on LZ4 implementation by Yann Collet and were changed
for kernel coding style.

LZ4 homepage : http://fastcompression.blogspot.com/p/lz4.html
LZ4 source repository : http://code.google.com/p/lz4/
svn revision : r90

Two APIs are added:

lz4_compress() support basic lz4 compression whereas lz4hc_compress()
support high compression or CPU performance get lower but compression
ratio get higher.  Also, we require the pre-allocated working memory with
the defined size and destination buffer must be allocated with the size of
lz4_compressbound.

[akpm@linux-foundation.org: make lz4_compresshcctx() static]
Signed-off-by: Chanho Min <chanho.min@lge.com>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
Cc: Bob Pearson <rpearson@systemfabricworks.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Herbert Xu <herbert@gondor.hengli.com.au>
Cc: Yann Collet <yann.collet.73@gmail.com>
Cc: Kyungsik Lee <kyungsik.lee@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:30 -07:00
Kyungsik Lee e76e1fdfa8 lib: add support for LZ4-compressed kernel
Add support for extracting LZ4-compressed kernel images, as well as
LZ4-compressed ramdisk images in the kernel boot process.

Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Yann Collet <yann.collet.73@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:30 -07:00
Linus Torvalds b2c311075d Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
 - Do not idle omap device between crypto operations in one session.
 - Added sha224/sha384 shims for SSSE3.
 - More optimisations for camellia-aesni-avx2.
 - Removed defunct blowfish/twofish AVX2 implementations.
 - Added unaligned buffer self-tests.
 - Added PCLMULQDQ optimisation for CRCT10DIF.
 - Added support for Freescale's DCP co-processor
 - Misc fixes.

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (44 commits)
  crypto: testmgr - test hash implementations with unaligned buffers
  crypto: testmgr - test AEADs with unaligned buffers
  crypto: testmgr - test skciphers with unaligned buffers
  crypto: testmgr - check that entries in alg_test_descs are in correct order
  Revert "crypto: twofish - add AVX2/x86_64 assembler implementation of twofish cipher"
  Revert "crypto: blowfish - add AVX2/x86_64 implementation of blowfish cipher"
  crypto: camellia-aesni-avx2 - tune assembly code for more performance
  hwrng: bcm2835 - fix MODULE_LICENSE tag
  hwrng: nomadik - use clk_prepare_enable()
  crypto: picoxcell - replace strict_strtoul() with kstrtoul()
  crypto: dcp - Staticize local symbols
  crypto: dcp - Use NULL instead of 0
  crypto: dcp - Use devm_* APIs
  crypto: dcp - Remove redundant platform_set_drvdata()
  hwrng: use platform_{get,set}_drvdata()
  crypto: omap-aes - Don't idle/start AES device between Encrypt operations
  crypto: crct10dif - Use PTR_RET
  crypto: ux500 - Cocci spatch "resource_size.spatch"
  crypto: sha256_ssse3 - add sha224 support
  crypto: sha512_ssse3 - add sha384 support
  ...
2013-07-05 12:12:33 -07:00
Linus Torvalds ab53485739 Merge branch 'exotic-arch-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull "exotic" arch fixes from Geert Uytterhoeven:
 "This is a collection of several exotic architecture fixes, and a few
  other fixes for issues that were detected while doing the former"

* 'exotic-arch-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (35 commits)
  lib: Move fonts from drivers/video/console/ to lib/fonts/
  console/font: Refactor font support code selection logic
  Revert "staging/solo6x10: depend on CONFIG_FONTS"
  input: cros_ec_keyb_clear_keyboard() depends on CONFIG_PM_SLEEP
  score: Wire up asm-generic/xor.h
  score: Remove unneeded <asm/dma-mapping.h>
  openrisc: Wire up asm-generic/xor.h
  h8300/boot: Use POSIX "$((..))" instead of bashism "$[...]"
  h8300: Mark H83002 and H83048 CPU support broken
  h8300: Switch h8300 to drivers/Kconfig
  h8300: Limit timer channel ranges in Kconfig
  h8300: Wire up asm-generic/xor.h
  h8300: Fill the system call table using a CALL() macro
  h8300: Fix <asm/tlb.h>
  h8300: Hardcode symbol prefixes in asm sources
  h8300: add missing definition for read_barries_depends()
  frv: head.S - Remove commented-out initialization code
  cris: Wire up asm-generic/vga.h
  parport: disable PC-style parallel port support on cris
  console: Disable VGA text console support on cris
  ...
2013-07-03 11:12:08 -07:00
Geert Uytterhoeven ee89bd6bc7 lib: Move fonts from drivers/video/console/ to lib/fonts/
Several drivers need font support independent of CONFIG_VT, cfr. commit
9cbce8d7e1dae0744ca4f68d62aa7de18196b6f4, "console/font: Refactor font
support code selection logic").
Hence move the fonts and their support logic from drivers/video/console/ to
its own library directory lib/fonts/.
This also allows to limit processing of drivers/video/console/Makefile to
CONFIG_VT=y again.

[Kevin Hilman <khilman@linaro.org>: Update arch/arm/boot/compressed/Makefile]
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-06-28 10:28:22 +02:00
Andy Shevchenko 4cd5773a2a net: core: move mac_pton() to lib/net_utils.c
Since we have at least one user of this function outside of CONFIG_NET
scope, we have to provide this function independently. The proposed
solution is to move it under lib/net_utils.c with corresponding
configuration variable and select wherever it is needed.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-05 12:00:27 -07:00
Tim Chen 2d31e518a4 crypto: crct10dif - Wrap crc_t10dif function all to use crypto transform framework
When CRC T10 DIF is calculated using the crypto transform framework, we
wrap the crc_t10dif function call to utilize it.  This allows us to
take advantage of any accelerated CRC T10 DIF transform that is
plugged into the crypto framework.

Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-05-20 20:11:01 +08:00
Matthew Garrett 0635eb8a54 Move utf16 functions to kernel core and rename
We want to be able to use the utf16 functions that are currently present
in the EFI variables code in platform-specific code as well. Move them to
the kernel core, and in the process rename them to accurately describe what
they do - they don't handle UTF16, only UCS2.

Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-04-15 21:23:03 +01:00
Kees Cook 525c1f9204 lib: remove depends on CONFIG_EXPERIMENTAL
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

CC: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
CC: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
CC: James Morris <james.l.morris@oracle.com>
CC: "Michael S. Tsirkin" <mst@redhat.com>
CC: Akinobu Mita <akinobu.mita@gmail.com>
CC: Ingo Molnar <mingo@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17 12:11:27 -08:00
Oleg Nesterov 22b361d1df percpu_rw_semaphore: introduce CONFIG_PERCPU_RWSEM
Currently only block_dev and uprobes use percpu_rw_semaphore,
add the config option selected by BLOCK || UPROBES.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Anton Arapov <anton@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17 17:15:18 -08:00
David Howells a77ad6ea0b X.509: Implement simple static OID registry
Implement a simple static OID registry that allows the mapping of an encoded
OID to an enum value for ease of use.

The OID registry index enum appears in the:

	linux/oid_registry.h

header file.  A script generates the registry from lines in the header file
that look like:

	<sp*>OID_foo,<sp*>/*<sp*>1.2.3.4<sp*>*/

The actual OID is taken to be represented by the numbers with interpolated
dots in the comment.

All other lines in the header are ignored.

The registry is queries by calling:

	OID look_up_oid(const void *data, size_t datasize);

This returns a number from the registry enum representing the OID if found or
OID__NR if not.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-10-08 13:50:18 +10:30
Linus Torvalds 27c1ee3f92 Merge branch 'akpm' (Andrew's patch-bomb)
Merge Andrew's first set of patches:
 "Non-MM patches:

   - lots of misc bits

   - tree-wide have_clk() cleanups

   - quite a lot of printk tweaks.  I draw your attention to "printk:
     convert the format for KERN_<LEVEL> to a 2 byte pattern" which
     looks a bit scary.  But afaict it's solid.

   - backlight updates

   - lib/ feature work (notably the addition and use of memweight())

   - checkpatch updates

   - rtc updates

   - nilfs updates

   - fatfs updates (partial, still waiting for acks)

   - kdump, proc, fork, IPC, sysctl, taskstats, pps, etc

   - new fault-injection feature work"

* Merge emailed patches from Andrew Morton <akpm@linux-foundation.org>: (128 commits)
  drivers/misc/lkdtm.c: fix missing allocation failure check
  lib/scatterlist: do not re-write gfp_flags in __sg_alloc_table()
  fault-injection: add tool to run command with failslab or fail_page_alloc
  fault-injection: add selftests for cpu and memory hotplug
  powerpc: pSeries reconfig notifier error injection module
  memory: memory notifier error injection module
  PM: PM notifier error injection module
  cpu: rewrite cpu-notifier-error-inject module
  fault-injection: notifier error injection
  c/r: fcntl: add F_GETOWNER_UIDS option
  resource: make sure requested range is included in the root range
  include/linux/aio.h: cpp->C conversions
  fs: cachefiles: add support for large files in filesystem caching
  pps: return PTR_ERR on error in device_create
  taskstats: check nla_reserve() return
  sysctl: suppress kmemleak messages
  ipc: use Kconfig options for __ARCH_WANT_[COMPAT_]IPC_PARSE_VERSION
  ipc: compat: use signed size_t types for msgsnd and msgrcv
  ipc: allow compat IPC version field parsing if !ARCH_WANT_OLD_COMPAT_IPC
  ipc: add COMPAT_SHMLBA support
  ...
2012-07-30 17:25:34 -07:00
Catalin Marinas 7463449b82 atomic64_test: simplify the #ifdef for atomic64_dec_if_positive() test
Introduce CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE and use this instead
of the multitude of #if defined() checks in atomic64_test.c

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30 17:25:16 -07:00
Linus Torvalds 287dc4b764 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
 "More hardware support across the field including a bunch of device
  drivers.  The highlight however really are further steps towards
  device tree.

  This has been sitting in -next for ages.  All MIPS _defconfigs have
  been tested to boot or where I don't have hardware available, to at
  least build fine."

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (77 commits)
  MIPS: Loongson 1B: Add defconfig
  MIPS: Loongson 1B: Add board support
  MIPS: Netlogic: early console fix
  MIPS: Netlogic: Fix indentation of smpboot.S
  MIPS: Netlogic: remove cpu_has_dc_aliases define for XLP
  MIPS: Netlogic: Remove unused pcibios_fixups
  MIPS: Netlogic: Add XLP SoC devices in FDT
  MIPS: Netlogic: Add IRQ mappings for more devices
  MIPS: Netlogic: USB support for XLP
  MIPS: Netlogic: XLP PCIe controller support.
  MIPS: Netlogic: Platform changes for XLR/XLS I2C
  MIPS: Netlogic: Platform NAND/NOR flash support
  MIPS: Netlogic: Platform changes for XLS USB
  MIPS: Netlogic: Remove NETLOGIC_ prefix
  MIPS: Netlogic: SMP wakeup code update
  MIPS: Netlogic: Update comments in smpboot.S
  MIPS: BCM63XX: Add 96328avng reference board
  MIPS: Expose PCIe drivers for MIPS
  MIPS: BCM63XX: Add PCIe Support for BCM6328
  MIPS: BCM63XX: Move the PCI initialization into its own function
  ...
2012-07-30 11:45:52 -07:00
David Daney ab25383983 of/lib: Allow scripts/dtc/libfdt to be used from kernel code
libfdt is part of the device tree support in scripts/dtc/libfdt.  For
some platforms that use the Device Tree, we want to be able to edit
the flattened device tree form.

We don't want to burden kernel builds that do not require it, so we
gate compilation of libfdt files with CONFIG_LIBFDT.  So if it is
needed, you need to do this in your Kconfig:

	select LIBFDT

And in the Makefile of the code using libfdt something like:

ccflags-y := -I$(src)/../../../scripts/dtc/libfdt

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree-discuss@lists.ozlabs.org
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: linux-kernel@vger.kernel.org
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23 13:54:52 +01:00
James Morris 66dd07b88a Merge commit 'v3.5-rc2' into next 2012-06-10 22:52:10 +10:00
Linus Torvalds 1e2aec873a Merge branch 'generic-string-functions'
This makes <asm/word-at-a-time.h> actually live up to its promise of
allowing architectures to help tune the string functions that do their
work a word at a time.

David had already taken the x86 strncpy_from_user() function, modified
it to work on sparc, and then done the extra work to make it generically
useful.  This then expands on that work by making x86 use that generic
version, completing the circle.

But more importantly, it fixes up the word-at-a-time interfaces so that
it's now easy to also support things like strnlen_user(), and pretty
much most random string functions.

David reports that it all works fine on sparc, and Jonas Bonn reported
that an earlier version of this worked on OpenRISC too.  It's pretty
easy for architectures to add support for this and just replace their
private versions with the generic code.

* generic-string-functions:
  sparc: use the new generic strnlen_user() function
  x86: use the new generic strnlen_user() function
  lib: add generic strnlen_user() function
  word-at-a-time: make the interfaces truly generic
  x86: use generic strncpy_from_user routine
2012-05-26 16:57:16 -07:00
Linus Torvalds 39b6cc668c arm-soc: add stmp-dev library code
A number of devices are using a common register layout, this adds support
 code for it in lib/stmp_device.c so we do not need to duplicate it in
 each driver.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPuexlAAoJEIwa5zzehBx31P0P/jK7GC5Ln2gr/bV+4Kt9fStS
 VcGI/ARsyQtwaNTJQfPkg8Weg3DhbPRlUWeimVKMFo3uEle3VjnPBjdcMPUKtW3x
 SPka/W591LGEdKQRmXZrISm2OiQXVvM2zkhSJV89n/tJBdHd+tDWDDq4Y784F8Cj
 hWmcIi66G4RBPj5pplf80UhNAEg5HoZHQnlgrS1iLMpBTwXAesv7zyZpvnsMzdpg
 qSJTfcifgLULtM0WFbooNGojBn8ftuA67psrw78vgV2bz7bVBioZHYFyqPWK9Gr0
 vtiKuyXqiDA65mueXA+E5RXXLCLQSyGdV8y0xiSYjilRVkziPcMKnQT07keb8SJN
 CCDpetjEULiQpgKvVWc7sDGlb5ePd/C5rs31S0fFOKjeRJNlfG5+OuqZPiobO7hk
 F2Fx3gq4LPLel7gwjK3T4XTmmL9kNt/y1sIfXx5WybJL8N5n6TdZIfWm6yOZYwfX
 jvG/CnvVvhgdWk/ebaTEOG1MaeNAY3uwGpSBuEEoXUDHatQdOYAsgLfJJv/H4zKp
 2AY9qvXTDtFYys/hs2WhwmS7s1WFlIrA+voEPBDa3WT2qGup8HAL/C9kL3ms2zqk
 8JL/yQ/IJpTHPb4bCGo9C08qdi1YtMbylHB0/ELvG1BNoHOnCDV3wZlVG3ZTQQb5
 c/Lb2H8crk5HVbpCPLQU
 =VHLM
 -----END PGP SIGNATURE-----

Merge tag 'stmp-dev' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc stmp-dev library code from Olof Johansson:
 "A number of devices are using a common register layout, this adds
  support code for it in lib/stmp_device.c so we do not need to
  duplicate it in each driver."

Fix up trivial conflicts in drivers/i2c/busses/i2c-mxs.c and
lib/Makefile

* tag 'stmp-dev' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  i2c: mxs: use global reset function
  lib: add support for stmp-style devices
2012-05-26 12:50:04 -07:00
Linus Torvalds a08c5356a3 lib: add generic strnlen_user() function
This adds a new generic optimized strnlen_user() function that uses the
<asm/word-at-a-time.h> infrastructure to portably do efficient string
handling.

In many ways, strnlen is much simpler than strncpy, and in particular we
can always pre-align the words we load from memory.  That means that all
the worries about alignment etc are a non-issue, so this one can easily
be used on any architecture.  You obviously do have to do the
appropriate word-at-a-time.h macros.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-26 11:33:53 -07:00
Dmitry Kasatkin 9e235dcaf4 Revert "crypto: GnuPG based MPI lib - additional sources (part 4)"
This reverts commit 7e8dec918e.

RSA verification implementation does not use this code.
James Morris has asked to remove that.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Requested-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-05-26 11:50:44 +10:00
Linus Torvalds ce004178be Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc
Pull sparc changes from David S. Miller:
 "This has the generic strncpy_from_user() implementation architectures
  can now use, which we've been developing on linux-arch over the past
  few days.

  For good measure I ran both a 32-bit and a 64-bit glibc testsuite run,
  and the latter of which pointed out an adjustment I needed to make to
  sparc's user_addr_max() definition.  Linus, you were right, STACK_TOP
  was not the right thing to use, even on sparc itself :-)

  From Sam Ravnborg, we have a conversion of sparc32 over to the common
  alloc_thread_info_node(), since the aspect which originally blocked
  our doing so (sun4c) has been removed."

Fix up trivial arch/sparc/Kconfig and lib/Makefile conflicts.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: Fix user_addr_max() definition.
  lib: Sparc's strncpy_from_user is generic enough, move under lib/
  kernel: Move REPEAT_BYTE definition into linux/kernel.h
  sparc: Increase portability of strncpy_from_user() implementation.
  sparc: Optimize strncpy_from_user() zero byte search.
  sparc: Add full proper error handling to strncpy_from_user().
  sparc32: use the common implementation of alloc_thread_info_node()
2012-05-24 15:10:28 -07:00
David S. Miller 2922585b93 lib: Sparc's strncpy_from_user is generic enough, move under lib/
To use this, an architecture simply needs to:

1) Provide a user_addr_max() implementation via asm/uaccess.h

2) Add "select GENERIC_STRNCPY_FROM_USER" to their arch Kcnfig

3) Remove the existing strncpy_from_user() implementation and symbol
   exports their architecture had.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: David Howells <dhowells@redhat.com>
2012-05-24 13:12:28 -07:00
Aneesh V 9c1c21a053 ddr: add LPDDR2 data from JESD209-2
add LPDDR2 data from the JEDEC spec JESD209-2. The data
includes:

1. Addressing information for LPDDR2 memories of different
   densities and types(S2/S4)
2. AC timing data.

This data will useful for memory controller device drivers.
Right now this is used by the TI EMIF SDRAM controller
driver.

Signed-off-by: Aneesh V <aneesh@ti.com>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Benoit Cousson <b-cousson@ti.com>
[santosh.shilimkar@ti.com: Moved to drivers/memory from drivers/misc]
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-02 00:04:06 -07:00
Wolfram Sang 4ccf4beab8 lib: add support for stmp-style devices
MX23/28 use IP cores which follow a register layout I have first seen on
STMP3xxx SoCs. In this layout, every register actually has four u32:

 1.) to store a value directly
 2.) a SET register where every 1-bit sets the corresponding bit,
     others are unaffected
 3.) same with a CLR register
 4.) same with a TOG (toggle) register

Also, the 2 MSBs in register 0 are always the same and can be used to reset
the IP core.

All this is strictly speaking not mach-specific (but IP core specific) and,
thus, doesn't need to be in mach-mxs/include. At least mx6 also uses IP cores
following this stmp-style. So:

Introduce a stmp-style device, put the code and defines for that in a public
place (lib/), and let drivers for stmp-style devices select that code.
To avoid regressions and ease reviewing, the actual code is simply copied from
mach-mxs. It definately wants updates, but those need a seperate patch series.

Voila, mach dependency gone, reusable code introduced. Note that I didn't
remove the duplicated code from mach-mxs yet, first the drivers have to be
converted.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Dong Aisheng <dong.aisheng@linaro.org>
2012-04-20 23:27:08 +02:00
Darrick J. Wong 82edb4baa7 crc32: add help text for the algorithm select option
Add help text to the crc32 algorithm selection option in Kconfig.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-28 17:14:37 -07:00
Linus Torvalds fa453a625d Merge branch 'for-linus-3.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML changes from Richard Weinberger:
 "Mostly bug fixes and cleanups"

* 'for-linus-3.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: (35 commits)
  um: Update defconfig
  um: Switch to large mcmodel on x86_64
  MTD: Relax dependencies
  um: Wire CONFIG_GENERIC_IO up
  um: Serve io_remap_pfn_range()
  Introduce CONFIG_GENERIC_IO
  um: allow SUBARCH=x86
  um: most of the SUBARCH uses can be killed
  um: deadlock in line_write_interrupt()
  um: don't bother trying to rebuild CHECKFLAGS for USER_OBJS
  um: use the right ifdef around exports in user_syms.c
  um: a bunch of headers can be killed by using generic-y
  um: ptrace-generic.h doesn't need user.h
  um: kill HOST_TASK_PID
  um: remove pointless include of asm/fixmap.h from asm/pgtable.h
  um: asm-offsets.h might as well come from underlying arch...
  um: merge processor_{32,64}.h a bit...
  um: switch close_chan() to struct line
  um: race fix: initialize delayed_work *before* registering IRQ
  um: line->have_irq is never checked...
  ...
2012-03-27 18:29:53 -07:00
Richard Weinberger 087fafd152 Introduce CONFIG_GENERIC_IO
There are situations where CONFIG_HAS_IOMEM is too restrictive.
For example CONFIG_MTD_NAND_NANDSIM depends on CONFIG_HAS_IOMEM
but it works perfectly fine if an architecture without io memory
just includes asm-generic/io.h or implements everything defined in it.
UML is such a corner case.

Signed-off-by: Richard Weinberger <richard@nod.at>
2012-03-25 00:29:56 +01:00
Darrick J. Wong 5cde7656d0 crc32: select an algorithm via Kconfig
Allow the kernel builder to choose a crc32* algorithm for the kernel.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: Bob Pearson <rpearson@systemfabricworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:38 -07:00
Darrick J. Wong 46c5801eaf crc32: bolt on crc32c
Reuse the existing crc32 code to stamp out a crc32c implementation.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Bob Pearson <rpearson@systemfabricworks.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:38 -07:00
Bob Pearson 3863ef31dc crc32: simplify unit test code
Replace the unit test provided in crc32.c, which doesn't have a makefile
and doesn't compile with current headers, with a simpler self test
routine that also gives a measure of performance and runs at module init
time.  The self test option can be enabled through a configuration
option CONFIG_CRC32_SELFTEST.

The test stresses the pre and post loops and is thus not very realistic
since actual uses will likely have addresses and lengths that are at
least 4 byte aligned.  However, the main loop is long enough so that the
performance is dominated by that loop.

The expected values for crc32_le and crc32_be were generated with the
original version of crc32.c using CRC_BITS_LE = 8 and CRC_BITS_BE = 8.
These values were then used to check all the values of the BITS
parameters in both the original and new versions.

The performance results show some variability from run to run in spite
of attempts to both warm the cache and reduce the amount of OS noise by
limiting interrutps during the test.  To get comparable results and to
analyse options wrt performance the best time reported over a small
sample of runs has been taken.

[djwong@us.ibm.com: Minor changelog tweaks]
Signed-off-by: Bob Pearson <rpearson@systemfabricworks.com>
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:37 -07:00
Linus Torvalds 95025d6b27 arch: fix ioport mapping on mips,sh
Kevin Cernekee reported that recent cleanup
 that replaced pci_iomap with a generic function
 failed to take into account the differences
 in io port handling on mips and sh architectures.
 
 Rather than revert the changes reintroducing the
 code duplication, this patchset fixes this
 by adding ability for architectures to override
 ioport mapping for pci devices.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJPL9X8AAoJECgfDbjSjVRpgzgIAIQGeWIP0JUWDDhLfYscTBZx
 96Am+8+maVl12t+evVH8lMnJDSqjKH0kWxk6CTQSUo57gZ4ne1SxbZ0+s5DcsE6m
 XAnIvkA+4pw36l4QRkEj8g+yrhpQhqaiKJt/l80jaVFGVAw47WrxGKatUe9L90lI
 X7+xa/F5zvZO6oamEI94SAojIvmKkZfHIjGc/NaZLaWHRysdFf8Ek13mj2+9FLq3
 dxmg9F14eS2X59tIkN4BLM4Dq8UyZqraT0N/0bO0Tetqx0azzNZbsBsg5RwQ15IF
 Ei0dMFARoT9UcIpdSwtpGGCoqYa5yRHFT1g54hv/Pon0mKUjG7Fpz5LRWmZ5Xic=
 =b1R2
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

arch: fix ioport mapping on mips,sh

Kevin Cernekee reported that recent cleanup that replaced pci_iomap with
a generic function failed to take into account the differences in io
port handling on mips and sh architectures.

Rather than revert the changes reintroducing the code duplication, this
patchset fixes this by adding ability for architectures to override
ioport mapping for pci devices.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  sh: use the the PCI channels's io_map_base
  mips: use the the PCI controller's io_map_base
  lib: add NO_GENERIC_PCI_IOPORT_MAP
2012-02-07 14:32:24 -08:00
David Miller c6df4b17c8 lib: Fix multiple definitions of clz_tab
Both sparc 32-bit's software divide assembler and MPILIB provide
clz_tab[] with identical contents.

Break it out into a seperate object file and select it when
SPARC32 or MPILIB is set.

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: James Morris <jmorris@namei.org>
2012-02-02 10:34:23 +11:00
Michael S. Tsirkin b923650b84 lib: add NO_GENERIC_PCI_IOPORT_MAP
Some architectures need to override the way
IO port mapping is done on PCI devices.
Supply a generic macro that calls
ioport_map, and make it possible for architectures
to override.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-01-31 23:19:47 +02:00
Dmitry Kasatkin 2e5f094b9d lib: Removed MPILIB, MPILIB_EXTRA, and SIGNATURE prompts
As modules are expected to select MPILIB, MPILIB_EXTRA, and SIGNATURE,
removed Kconfig prompts.

Requested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: James Morris <jmorris@namei.org>
2012-01-18 10:46:26 +11:00