Commit Graph

27 Commits

Author SHA1 Message Date
Sven Eckelmann 68a600de9a batman-adv: Use includes instead of fwdecls
While it can be slightly beneficial for the build performance to use
forward declarations instead of includes, the handling of them together
with changes in the included headers makes it unnecessary complicated and
fragile. Just replace them with actual includes since some parts (hwmon,
..) of the kernel even request avoidance of forward declarations and net/
is mostly not using them in *.c file.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-05-25 12:59:53 +02:00
Sven Eckelmann 0d5f20c42b batman-adv: Drop license boilerplate
All files got a SPDX-License-Identifier with commit 7db7d9f369
("batman-adv: Add SPDX license identifier above copyright header"). All the
required information about the license conditions can be found in
LICENSES/.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-03-25 09:31:35 +01:00
Sven Eckelmann 7a79d717e0 batman-adv: Update copyright years for 2019
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-01-04 11:04:24 +01:00
Linus Lüssing b61ec31c85 batman-adv: Snoop DHCPACKs for DAT
In a 1000 nodes mesh network (Freifunk Hamburg) we can still see
30KBit/s of ARP traffic (equalling about 25% of all layer two
specific overhead, remaining after some filtering) flooded through
the mesh. These 30KBit/s are mainly ARP Requests from the
gateways / DHCP servers.

By snooping DHCPACKs we can learn about MAC/IP address pairs
in the DHCP range without relying on ARP. This patch is in preparation
to eliminate the need for mesh wide message flooding for IPv4 address
resolution.

Also this allows to quickly update a MAC/IP pair at least in the DHT when
DHCP reassigns an IP address to a new host.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-12-30 18:14:42 +01:00
Linus Lüssing 41aeefcc38 batman-adv: add DAT cache netlink support
Dump the list of DAT cache entries via the netlink socket.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-03-14 10:15:08 +01:00
Sven Eckelmann 6b1aea8cf2 batman-adv: Update copyright years for 2018
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-02-26 17:57:39 +01:00
Sven Eckelmann fec149f5d3 batman-adv: Convert packet.h to uapi header
The header file is used by different userspace programs to inject packets
or to decode sniffed packets. It should therefore be available to them as
userspace header.

Also other components in the kernel (like the flow dissector) require
access to the packet definitions to be able to decode ETH_P_BATMAN ethernet
packets.

Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21 15:35:53 -05:00
Sven Eckelmann 7e9a8c2ce7 batman-adv: Use parentheses in function kernel-doc
The documentation describing kernel-doc comments for functions ("How to
format kernel-doc comments") uses parentheses at the end of the function
name. Using this format allows to use a consistent style when adding
documentation to a function and when referencing this function in a
different kernel-doc section.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-15 17:29:20 +01:00
Sven Eckelmann 7db7d9f369 batman-adv: Add SPDX license identifier above copyright header
The "Linux kernel licensing rules" require that each file has a SPDX
license identifier as first line (and sometimes as second line).

The FSFE REUSE practices [1] would also require the same tags but have no
restrictions on the placement in the source file. Using the "Linux kernel
licensing rules" is therefore also fulfilling the FSFE REUSE practices
requirements at the same time.

[1] https://reuse.software/practices/

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-12-15 17:22:45 +01:00
Sven Eckelmann ac79cbb96b batman-adv: update copyright years for 2017
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-01-26 08:34:19 +01:00
Sven Eckelmann 0046b0402a batman-adv: update copyright years for 2016
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-02 12:55:10 +08:00
Sven Eckelmann 6b5e971a28 batman-adv: Replace C99 int types with kernel type
(s|u)(8|16|32|64) are the preferred types in the kernel. The use of the
standard C99 types u?int(8|16|32|64)_t are objected by some people and even
checkpatch now warns about using them.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-25 00:12:17 +02:00
Sven Eckelmann 1e2c2a4fe4 batman-adv: Add required includes to all files
The header files could not be build indepdent from each other. This is
happened because headers didn't include the files for things they've used.
This was problematic because the success of a build depended on the
knowledge about the right order of local includes.

Also source files were not including everything they've used explicitly.
Instead they required that transitive includes are always stable. This is
problematic because some transitive includes are not obvious, depend on
config settings and may not be stable in the future.

The order for include blocks are:

 * primary headers (main.h and the *.h file of a *.c file)
 * global linux headers
 * required local headers
 * extra forward declarations for pointers in function/struct declarations

The only exceptions are linux/bitops.h and linux/if_ether.h in packet.h.
This header file is shared with userspace applications like batctl and must
therefore build together with userspace applications. The header
linux/bitops.h is not part of the uapi headers and linux/if_ether.h
conflicts with the musl implementation of netinet/if_ether.h. The
maintainers rejected the use of __KERNEL__ preprocessor checks and thus
these two headers are only in main.h. All files using packet.h first have
to include main.h to work correctly.

Reported-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-07 17:07:19 +02:00
Sven Eckelmann 9f6446c7f9 batman-adv: update copyright years for 2015
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29 10:13:35 +02:00
Martin Hundebøll ba97abb863 batman-adv: kernel doc fix for distributed-arp-table.h
Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Acked-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-01-07 17:21:54 +01:00
Antonio Quartulli 151dcb3c56 batman-adv: improve DAT documentation
Add missing documentation for BATADV_DAT_ADDR_MAX and
convert an existing documentation to kerneldoc

Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-03-22 09:18:59 +01:00
Simon Wunderlich e19f9759ed batman-adv: update copyright years for 2014
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-12 14:41:19 +01:00
Antonio Quartulli ebf38fb7ab batman-adv: remove FSF address from GPL disclaimer
As suggested by checkpatch, remove all the references to the
FSF address since the kernel already has one reference in
its documentation.

In this way it is easier to update it in case of future
changes.

Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-01-08 20:49:39 +01:00
Antonio Quartulli a48bcacdb3 batman-adv: properly rename define in distributed arp table header file
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-01-08 20:49:38 +01:00
Marek Lindner 17cf0ea455 batman-adv: tvlv - add distributed arp table container
Create DAT container to announce DAT capabilities (if enabled).

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-09 21:22:27 +02:00
Antonio Quartulli 0b87393146 batman-adv: update copyright years
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-01-19 21:18:12 +08:00
Martin Hundebøll 4046b24afa batman-adv: Add get_ethtool_stats() support for DAT
Added additional counters for D.A.T.

Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07 20:00:23 +01:00
Antonio Quartulli 1722447482 batman-adv: Distributed ARP Table - add compile option
This patch makes it possible to decide whether to include DAT within the
batman-adv binary or not.
It is extremely useful when the user wants to reduce the size of the resulting
module by cutting off any not needed feature.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07 20:00:22 +01:00
Antonio Quartulli c384ea3ec9 batman-adv: Distributed ARP Table - add snooping functions for ARP messages
In case of an ARP message going in or out the soft_iface, it is intercepted and
a special action is performed. In particular the DHT helper functions previously
implemented are used to store all the ARP entries belonging to the network in
order to provide a fast and unicast lookup instead of the classic broadcast
flooding mechanism.
Each node stores the entries it is responsible for (following the DHT rules) in
its soft_iface ARP table. This makes it possible to reuse the kernel data
structures and functions for ARP management.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07 20:00:21 +01:00
Antonio Quartulli 5c3a0e5535 batman-adv: Distributed ARP Table - add ARP parsing functions
ARP messages are now parsed to make it possible to trigger special actions
depending on their types (snooping).

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07 20:00:20 +01:00
Antonio Quartulli 2f1dfbe185 batman-adv: Distributed ARP Table - implement local storage
Since batman-adv cannot inter-operate with the host ARP table, this patch
introduces a batman-adv private storage for ARP entries exchanged within DAT.
This storage will represent the node local cache in the DAT protocol.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07 20:00:20 +01:00
Antonio Quartulli 785ea11441 batman-adv: Distributed ARP Table - create DHT helper functions
Add all the relevant functions in order to manage a Distributed Hash Table over
the B.A.T.M.A.N.-adv network. It will later be used to store several ARP entries
and implement DAT (Distributed ARP Table)

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07 20:00:19 +01:00