Commit Graph

282 Commits

Author SHA1 Message Date
Yonatan Goldschmidt 05ba4c8953 netfilter: Update obsolete comments referring to ip_conntrack
In 9fb9cbb108 ("[NETFILTER]: Add nf_conntrack subsystem.") the new
generic nf_conntrack was introduced, and it came to supersede the old
ip_conntrack.

This change updates (some) of the obsolete comments referring to old
file/function names of the ip_conntrack mechanism, as well as removes a
few self-referencing comments that we shouldn't maintain anymore.

I did not update any comments referring to historical actions (e.g,
comments like "this file was derived from ..." were left untouched, even
if the referenced file is no longer here).

Signed-off-by: Yonatan Goldschmidt <yon.goldschmidt@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-07-16 13:17:00 +02:00
Linus Torvalds 237f83dfbe Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Some highlights from this development cycle:

   1) Big refactoring of ipv6 route and neigh handling to support
      nexthop objects configurable as units from userspace. From David
      Ahern.

   2) Convert explored_states in BPF verifier into a hash table,
      significantly decreased state held for programs with bpf2bpf
      calls, from Alexei Starovoitov.

   3) Implement bpf_send_signal() helper, from Yonghong Song.

   4) Various classifier enhancements to mvpp2 driver, from Maxime
      Chevallier.

   5) Add aRFS support to hns3 driver, from Jian Shen.

   6) Fix use after free in inet frags by allocating fqdirs dynamically
      and reworking how rhashtable dismantle occurs, from Eric Dumazet.

   7) Add act_ctinfo packet classifier action, from Kevin
      Darbyshire-Bryant.

   8) Add TFO key backup infrastructure, from Jason Baron.

   9) Remove several old and unused ISDN drivers, from Arnd Bergmann.

  10) Add devlink notifications for flash update status to mlxsw driver,
      from Jiri Pirko.

  11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski.

  12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes.

  13) Various enhancements to ipv6 flow label handling, from Eric
      Dumazet and Willem de Bruijn.

  14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van
      der Merwe, and others.

  15) Various improvements to axienet driver including converting it to
      phylink, from Robert Hancock.

  16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean.

  17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana
      Radulescu.

  18) Add devlink health reporting to mlx5, from Moshe Shemesh.

  19) Convert stmmac over to phylink, from Jose Abreu.

  20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from
      Shalom Toledo.

  21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera.

  22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel.

  23) Track spill/fill of constants in BPF verifier, from Alexei
      Starovoitov.

  24) Support bounded loops in BPF, from Alexei Starovoitov.

  25) Various page_pool API fixes and improvements, from Jesper Dangaard
      Brouer.

  26) Just like ipv4, support ref-countless ipv6 route handling. From
      Wei Wang.

  27) Support VLAN offloading in aquantia driver, from Igor Russkikh.

  28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy.

  29) Add flower GRE encap/decap support to nfp driver, from Pieter
      Jansen van Vuuren.

  30) Protect against stack overflow when using act_mirred, from John
      Hurley.

  31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen.

  32) Use page_pool API in netsec driver, Ilias Apalodimas.

  33) Add Google gve network driver, from Catherine Sullivan.

  34) More indirect call avoidance, from Paolo Abeni.

  35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan.

  36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek.

  37) Add MPLS manipulation actions to TC, from John Hurley.

  38) Add sending a packet to connection tracking from TC actions, and
      then allow flower classifier matching on conntrack state. From
      Paul Blakey.

  39) Netfilter hw offload support, from Pablo Neira Ayuso"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits)
  net/mlx5e: Return in default case statement in tx_post_resync_params
  mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync().
  net: dsa: add support for BRIDGE_MROUTER attribute
  pkt_sched: Include const.h
  net: netsec: remove static declaration for netsec_set_tx_de()
  net: netsec: remove superfluous if statement
  netfilter: nf_tables: add hardware offload support
  net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload
  net: flow_offload: add flow_block_cb_is_busy() and use it
  net: sched: remove tcf block API
  drivers: net: use flow block API
  net: sched: use flow block API
  net: flow_offload: add flow_block_cb_{priv, incref, decref}()
  net: flow_offload: add list handling functions
  net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free()
  net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_*
  net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND
  net: flow_offload: add flow_block_cb_setup_simple()
  net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC
  net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC
  ...
2019-07-11 10:55:49 -07:00
Linus Torvalds e9a83bd232 It's been a relatively busy cycle for docs:
- A fair pile of RST conversions, many from Mauro.  These create more
    than the usual number of simple but annoying merge conflicts with other
    trees, unfortunately.  He has a lot more of these waiting on the wings
    that, I think, will go to you directly later on.
 
  - A new document on how to use merges and rebases in kernel repos, and one
    on Spectre vulnerabilities.
 
  - Various improvements to the build system, including automatic markup of
    function() references because some people, for reasons I will never
    understand, were of the opinion that :c:func:``function()`` is
    unattractive and not fun to type.
 
  - We now recommend using sphinx 1.7, but still support back to 1.4.
 
  - Lots of smaller improvements, warning fixes, typo fixes, etc.
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl0krAEPHGNvcmJldEBs
 d24ubmV0AAoJEBdDWhNsDH5Yg98H/AuLqO9LpOgUjF4LhyjxGPdzJkY9RExSJ7km
 gznyreLCZgFaJR+AY6YDsd4Jw6OJlPbu1YM/Qo3C3WrZVFVhgL/s2ebvBgCo50A8
 raAFd8jTf4/mGCHnAqRotAPQ3mETJUk315B66lBJ6Oc+YdpRhwXWq8ZW2bJxInFF
 3HDvoFgMf0KhLuMHUkkL0u3fxH1iA+KvDu8diPbJYFjOdOWENz/CV8wqdVkXRSEW
 DJxIq89h/7d+hIG3d1I7Nw+gibGsAdjSjKv4eRKauZs4Aoxd1Gpl62z0JNk6aT3m
 dtq4joLdwScydonXROD/Twn2jsu4xYTrPwVzChomElMowW/ZBBY=
 =D0eO
 -----END PGP SIGNATURE-----

Merge tag 'docs-5.3' of git://git.lwn.net/linux

Pull Documentation updates from Jonathan Corbet:
 "It's been a relatively busy cycle for docs:

   - A fair pile of RST conversions, many from Mauro. These create more
     than the usual number of simple but annoying merge conflicts with
     other trees, unfortunately. He has a lot more of these waiting on
     the wings that, I think, will go to you directly later on.

   - A new document on how to use merges and rebases in kernel repos,
     and one on Spectre vulnerabilities.

   - Various improvements to the build system, including automatic
     markup of function() references because some people, for reasons I
     will never understand, were of the opinion that
     :c:func:``function()`` is unattractive and not fun to type.

   - We now recommend using sphinx 1.7, but still support back to 1.4.

   - Lots of smaller improvements, warning fixes, typo fixes, etc"

* tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits)
  docs: automarkup.py: ignore exceptions when seeking for xrefs
  docs: Move binderfs to admin-guide
  Disable Sphinx SmartyPants in HTML output
  doc: RCU callback locks need only _bh, not necessarily _irq
  docs: format kernel-parameters -- as code
  Doc : doc-guide : Fix a typo
  platform: x86: get rid of a non-existent document
  Add the RCU docs to the core-api manual
  Documentation: RCU: Add TOC tree hooks
  Documentation: RCU: Rename txt files to rst
  Documentation: RCU: Convert RCU UP systems to reST
  Documentation: RCU: Convert RCU linked list to reST
  Documentation: RCU: Convert RCU basic concepts to reST
  docs: filesystems: Remove uneeded .rst extension on toctables
  scripts/sphinx-pre-install: fix out-of-tree build
  docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/
  Documentation: PGP: update for newer HW devices
  Documentation: Add section about CPU vulnerabilities for Spectre
  Documentation: platform: Delete x86-laptop-drivers.txt
  docs: Note that :c:func: should no longer be used
  ...
2019-07-09 12:34:26 -07:00
Linus Torvalds 8a3367cc80 LED updates for 5.3-rc1
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQUwxxKyE5l/npt8ARiEGxRG/Sl2wUCXRozKAAKCRBiEGxRG/Sl
 25okAP9I0Rmscpqjb/+GEeXH4EmL3moGzc9o/BzHRqfeO4wqYAEA+8f7L20xHe8g
 tvEGfP7mN/oBmcAfqgH5K9F4eJsBRAw=
 =NkCn
 -----END PGP SIGNATURE-----

Merge tag 'leds-for-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED updates from Jacek Anaszewski:

 - Add a new LED common module for ti-lmu driver family

 - Modify MFD ti-lmu bindings
        - add ti,brightness-resolution
        - add the ramp up/down property

 - Add regulator support for LM36274 driver to lm363x-regulator.c

 - New LED class drivers with DT bindings:
        - leds-spi-byte
        - leds-lm36274
        - leds-lm3697 (move the support from MFD to LED subsystem)

 - Simplify getting the I2C adapter of a client:
        - leds-tca6507
        - leds-pca955x

 - Convert LED documentation to ReST

* tag 'leds-for-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  dt: leds-lm36274.txt: fix a broken reference to ti-lmu.txt
  docs: leds: convert to ReST
  leds: leds-tca6507: simplify getting the adapter of a client
  leds: leds-pca955x: simplify getting the adapter of a client
  leds: lm36274: Introduce the TI LM36274 LED driver
  dt-bindings: leds: Add LED bindings for the LM36274
  regulator: lm363x: Add support for LM36274
  mfd: ti-lmu: Add LM36274 support to the ti-lmu
  dt-bindings: mfd: Add lm36274 bindings to ti-lmu
  leds: max77650: Remove set but not used variable 'parent'
  leds: avoid flush_work in atomic context
  leds: lm3697: Introduce the lm3697 driver
  mfd: ti-lmu: Remove support for LM3697
  dt-bindings: ti-lmu: Modify dt bindings for the LM3697
  leds: TI LMU: Add common code for TI LMU devices
  leds: spi-byte: add single byte SPI LED driver
  dt-bindings: leds: Add binding for spi-byte LED.
  dt-bindings: mfd: LMU: Add ti,brightness-resolution
  dt-bindings: mfd: LMU: Add the ramp up/down property
2019-07-09 08:59:39 -07:00
Fernando Fernandez Mancera ad49d86e07 netfilter: nf_tables: Add synproxy support
Add synproxy support for nf_tables. This behaves like the iptables
synproxy target but it is structured in a way that allows us to propose
improvements in the future.

Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-07-05 21:34:23 +02:00
Mauro Carvalho Chehab 8dab91970a docs: leds: convert to ReST
Rename the leds documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-06-28 20:57:31 +02:00
Mauro Carvalho Chehab cd238effef docs: kbuild: convert docs to ReST and rename to *.rst
The kbuild documentation clearly shows that the documents
there are written at different times: some use markdown,
some use their own peculiar logic to split sections.

Convert everything to ReST without affecting too much
the author's style and avoiding adding uneeded markups.

The conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-06-14 14:21:21 -06:00
Thomas Gleixner ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Florian Westphal adf82accc5 netfilter: x_tables: merge ip and ipv6 masquerade modules
No need to have separate modules for this.
before:
 text    data   bss    dec  filename
 2038    1168     0   3206  net/ipv4/netfilter/ipt_MASQUERADE.ko
 1526    1024     0   2550  net/ipv6/netfilter/ip6t_MASQUERADE.ko
after:
 text    data   bss    dec  filename
 2521    1296     0   3817  net/netfilter/xt_MASQUERADE.ko

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-04-11 20:59:29 +02:00
Florian Westphal 4806e97572 netfilter: replace NF_NAT_NEEDED with IS_ENABLED(CONFIG_NF_NAT)
NF_NAT_NEEDED is true whenever nat support for either ipv4 or ipv6 is
enabled.  Now that the af-specific nat configuration switches have been
removed, IS_ENABLED(CONFIG_NF_NAT) has the same effect.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-04-08 23:02:52 +02:00
Arnd Bergmann d1fa381033 netfilter: fix NETFILTER_XT_TARGET_TEE dependencies
With NETFILTER_XT_TARGET_TEE=y and IP6_NF_IPTABLES=m, we get a link
error when referencing the NF_DUP_IPV6 module:

net/netfilter/xt_TEE.o: In function `tee_tg6':
xt_TEE.c:(.text+0x14): undefined reference to `nf_dup_ipv6'

The problem here is the 'select NF_DUP_IPV6 if IP6_NF_IPTABLES'
that forces NF_DUP_IPV6 to be =m as well rather than setting it
to =y as was intended here. Adding a soft dependency on
IP6_NF_IPTABLES avoids that broken configuration.

Fixes: 5d400a4933 ("netfilter: Kconfig: Change select IPv6 dependencies")
Cc: Máté Eckl <ecklm94@gmail.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Link: https://patchwork.ozlabs.org/patch/999498/
Link: https://lore.kernel.org/patchwork/patch/960062/
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-03-18 16:21:54 +01:00
Florian Westphal db8ab38880 netfilter: nf_tables: merge ipv4 and ipv6 nat chain types
Merge the ipv4 and ipv6 nat chain type. This is the last
missing piece which allows to provide inet family support
for nat in a follow patch.

The kconfig knobs for ipv4/ipv6 nat chain are removed, the
nat chain type will be built unconditionally if NFT_NAT
expression is enabled.

Before:
   text	   data	    bss	    dec	    hex	filename
   1576     896       0    2472     9a8 nft_chain_nat_ipv4.ko
   1697     896       0    2593     a21 nft_chain_nat_ipv6.ko

After:
   text	   data	    bss	    dec	    hex	filename
   1832     896       0    2728     aa8 nft_chain_nat.ko

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-03-01 14:36:59 +01:00
Florian Westphal a9ce849e78 netfilter: nf_tables: nat: merge nft_masq protocol specific modules
The family specific masq modules are way too small to warrant
an extra module, just place all of them in nft_masq.

before:
  text	   data	    bss	    dec	    hex	filename
   1001	    832	      0	   1833	    729	nft_masq.ko
    766	    896	      0	   1662	    67e	nft_masq_ipv4.ko
    764	    896	      0	   1660	    67c	nft_masq_ipv6.ko

after:
   2010	    960	      0	   2970	    b9a	nft_masq.ko

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-03-01 14:36:59 +01:00
Florian Westphal c78efc99c7 netfilter: nf_tables: nat: merge nft_redir protocol specific modules
before:
 text	   data	    bss	    dec	    hex	filename
 990	    832	      0	   1822	    71e nft_redir.ko
 697	    896	      0	   1593	    639 nft_redir_ipv4.ko
 713	    896	      0	   1609	    649	nft_redir_ipv6.ko

after:
 text	   data	    bss	    dec	    hex	filename
 1910	    960	      0	   2870	    b36	nft_redir.ko

size is reduced, all helpers from nft_redir.ko can be made static.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-03-01 14:36:58 +01:00
Florian Westphal 3bf195ae60 netfilter: nat: merge nf_nat_ipv4,6 into nat core
before:
   text    data     bss     dec     hex filename
  16566    1576    4136   22278    5706 nf_nat.ko
   3598	    844	      0	   4442	   115a	nf_nat_ipv6.ko
   3187	    844	      0	   4031	    fbf	nf_nat_ipv4.ko

after:
   text    data     bss     dec     hex filename
  22948    1612    4136   28696    7018 nf_nat.ko

... with ipv4/v6 nat now provided directly via nf_nat.ko.

Also changes:
       ret = nf_nat_ipv4_fn(priv, skb, state);
       if (ret != NF_DROP && ret != NF_STOLEN &&
into
	if (ret != NF_ACCEPT)
		return ret;

everywhere.

The nat hooks never should return anything other than
ACCEPT or DROP (and the latter only in rare error cases).

The original code uses multi-line ANDing including assignment-in-if:
        if (ret != NF_DROP && ret != NF_STOLEN &&
           !(IPCB(skb)->flags & IPSKB_XFRM_TRANSFORMED) &&
            (ct = nf_ct_get(skb, &ctinfo)) != NULL) {

I removed this while moving, breaking those in separate conditionals
and moving the assignments into extra lines.

checkpatch still generates some warnings:
 1. Overly long lines (of moved code).
    Breaking them is even more ugly. so I kept this as-is.
 2. use of extern function declarations in a .c file.
    This is necessary evil, we must call
    nf_nat_l3proto_register() from the nat core now.
    All l3proto related functions are removed later in this series,
    those prototypes are then removed as well.

v2: keep empty nf_nat_ipv6_csum_update stub for CONFIG_IPV6=n case.
v3: remove IS_ENABLED(NF_NAT_IPV4/6) tests, NF_NAT_IPVx toggles
    are removed here.
v4: also get rid of the assignments in conditionals.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-02-27 10:49:55 +01:00
Florian Westphal d1aca8ab31 netfilter: nat: merge ipv4 and ipv6 masquerade functionality
Before:
   text	   data	    bss	    dec	    hex	filename
  13916	   1412	   4128	  19456	   4c00	nf_nat.ko
   4510	    968	      4	   5482	   156a	nf_nat_ipv4.ko
   5146	    944	      8	   6098	   17d2	nf_nat_ipv6.ko

After:
   text	   data	    bss	    dec	    hex	filename
  16566	   1576	   4136	  22278	   5706	nf_nat.ko
   3187	    844	      0	   4031	    fbf	nf_nat_ipv4.ko
   3598	    844	      0	   4442	   115a	nf_nat_ipv6.ko

... so no drastic changes in combined size.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-02-27 10:49:24 +01:00
Florian Westphal 22fc4c4c9f netfilter: conntrack: gre: switch module to be built-in
This makes the last of the modular l4 trackers 'bool'.

After this, all infrastructure to handle dynamic l4 protocol registration
becomes obsolete and can be removed in followup patches.

Old:
302824 net/netfilter/nf_conntrack.ko
 21504 net/netfilter/nf_conntrack_proto_gre.ko

New:
313728 net/netfilter/nf_conntrack.ko

Old:
   text	   data	    bss	    dec	    hex	filename
   6281	   1732	      4	   8017	   1f51	nf_conntrack_proto_gre.ko
 108356	  20613	    236	 129205	  1f8b5	nf_conntrack.ko
New:
 112095	  21381	    240	 133716	  20a54	nf_conntrack.ko

The size increase is only temporary.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-01-18 15:02:33 +01:00
Florian Westphal faec18dbb0 netfilter: nat: remove l4proto->manip_pkt
This removes the last l4proto indirection, the two callers, the l3proto
packet mangling helpers for ipv4 and ipv6, now call the
nf_nat_l4proto_manip_pkt() helper.

nf_nat_proto_{dccp,tcp,sctp,gre,icmp,icmpv6} are left behind, even though
they contain no functionality anymore to not clutter this patch.

Next patch will remove the empty files and the nf_nat_l4proto
struct.

nf_nat_proto_udp.c is renamed to nf_nat_proto.c, as it now contains the
other nat manip functionality as well, not just udp and udplite.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-12-17 23:33:29 +01:00
Florian Westphal 6c47260250 netfilter: nf_tables: add xfrm expression
supports fetching saddr/daddr of tunnel mode states, request id and spi.
If direction is 'in', use inbound skb secpath, else dst->xfrm.

Joint work with Máté Eckl.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-09-17 11:40:08 +02:00
Florian Westphal 10568f6c57 netfilter: xt_checksum: ignore gso skbs
Satish Patel reports a skb_warn_bad_offload() splat caused
by -j CHECKSUM rules:

-A POSTROUTING -p tcp -m tcp --sport 80 -j CHECKSUM

The CHECKSUM target has never worked with GSO skbs, and the above rule
makes no sense as kernel will handle checksum updates on transmit.

Unfortunately, there are 3rd party tools that install such rules, so we
cannot reject this from the config plane without potential breakage.

Amend Kconfig text to clarify that the CHECKSUM target is only useful
in virtualized environments, where old dhcp clients that use AF_PACKET
used to discard UDP packets with a 'bad' header checksum and add a
one-time warning in case such rule isn't restricted to UDP.

v2: check IP6T_F_PROTO flag before cmp (Michal Kubecek)

Reported-by: Satish Patel <satish.txt@gmail.com>
Reported-by: Markos Chandras <markos.chandras@suse.com>
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-08-24 09:58:16 +02:00
Florian Westphal 7bdfcea875 netfilter: kconfig: remove ct zone/label dependencies
connection tracking zones currently depend on the xtables CT target.
The reasoning was that it makes no sense to support zones if they can't
be configured (which needed CT target).

Nowadays zones can also be used by OVS and configured via nftables,
so remove the dependency.

connection tracking labels are handled via hidden dependency that gets
auto-selected by the connlabel match.
Make it a visible knob, as labels can be attached via ctnetlink
or via nftables rules (nft_ct expression) too.

This allows to use conntrack labels and zones with nftables-only build.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-08-03 21:15:12 +02:00
Pablo Neira Ayuso af308b94a2 netfilter: nf_tables: add tunnel support
This patch implements the tunnel object type that can be used to
configure tunnels via metadata template through the existing lightweight
API from the ingress path.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-08-03 21:12:12 +02:00
Harsha Sharma c753032690 netfilter: cttimeout: Make NF_CT_NETLINK_TIMEOUT depend on NF_CONNTRACK_TIMEOUT
With this, remove ifdef for CONFIG_NF_CONNTRACK_TIMEOUT in
nfnetlink_cttimeout. This is also required for moving ctnl_untimeout
from nfnetlink_cttimeout to nf_conntrack_timeout.

Signed-off-by: Harsha Sharma <harshasharmaiitr@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-08-03 18:50:41 +02:00
Máté Eckl 4ed8eb6570 netfilter: nf_tables: Add native tproxy support
A great portion of the code is taken from xt_TPROXY.c

There are some changes compared to the iptables implementation:
 - tproxy statement is not terminal here
 - Either address or port has to be specified, but at least one of them
   is necessary. If one of them is not specified, the evaluation will be
   performed with the original attribute of the packet (ie. target port
   is not specified => the packet's dport will be used).

To make this work in inet tables, the tproxy structure has a family
member (typically called priv->family) which is not necessarily equal to
ctx->family.

priv->family can have three values legally:
 - NFPROTO_IPV4 if the table family is ip OR if table family is inet,
   but an ipv4 address is specified as a target address. The rule only
   evaluates ipv4 packets in this case.
 - NFPROTO_IPV6 if the table family is ip6 OR if table family is inet,
   but an ipv6 address is specified as a target address. The rule only
   evaluates ipv6 packets in this case.
 - NFPROTO_UNSPEC if the table family is inet AND if only the port is
   specified. The rule will evaluate both ipv4 and ipv6 packets.

Signed-off-by: Máté Eckl <ecklm94@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-30 14:07:12 +02:00
Fernando Fernandez Mancera b96af92d6e netfilter: nf_tables: implement Passive OS fingerprint module in nft_osf
Add basic module functions into nft_osf.[ch] in order to implement OSF
module in nf_tables.

Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-30 14:07:11 +02:00
Fernando Fernandez Mancera f6b7b5f4f3 netfilter: nf_osf: rename nf_osf.c to nfnetlink_osf.c
Rename nf_osf.c to nfnetlink_osf.c as we introduce nfnetlink_osf which is
the OSF infraestructure.

Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-30 14:07:10 +02:00
David S. Miller 99d20a461c Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

The following patchset contains Netfilter/IPVS updates for your net-next
tree:

1) No need to set ttl from reject action for the bridge family, from
   Taehee Yoo.

2) Use a fixed timeout for flow that are passed up from the flowtable
   to conntrack, from Florian Westphal.

3) More preparation patches for tproxy support for nf_tables, from Mate
   Eckl.

4) Remove unnecessary indirection in core IPv6 checksum function, from
   Florian Westphal.

5) Use nf_ct_get_tuplepr() from openvswitch, instead of opencoding it.
   From Florian Westphal.

6) socket match now selects socket infrastructure, instead of depending
   on it. From Mate Eckl.

7) Patch series to simplify conntrack tuple building/parsing from packet
   path and ctnetlink, from Florian Westphal.

8) Fetch timeout policy from protocol helpers, instead of doing it from
   core, from Florian Westphal.

9) Merge IPv4 and IPv6 protocol trackers into conntrack core, from
   Florian Westphal.

10) Depend on CONFIG_NF_TABLES_IPV6 and CONFIG_IP6_NF_IPTABLES
    respectively, instead of IPV6. Patch from Mate Eckl.

11) Add specific function for garbage collection in conncount,
    from Yi-Hung Wei.

12) Catch number of elements in the connlimit list, from Yi-Hung Wei.

13) Move locking to nf_conncount, from Yi-Hung Wei.

14) Series of patches to add lockless tree traversal in nf_conncount,
    from Yi-Hung Wei.

15) Resolve clash in matching conntracks when race happens, from
    Martynas Pumputis.

16) If connection entry times out, remove template entry from the
    ip_vs_conn_tab table to improve behaviour under flood, from
    Julian Anastasov.

17) Remove useless parameter from nf_ct_helper_ext_add(), from Gao feng.

18) Call abort from 2-phase commit protocol before requesting modules,
    make sure this is done under the mutex, from Florian Westphal.

19) Grab module reference when starting transaction, also from Florian.

20) Dynamically allocate expression info array for pre-parsing, from
    Florian.

21) Add per netns mutex for nf_tables, from Florian Westphal.

22) A couple of patches to simplify and refactor nf_osf code to prepare
    for nft_osf support.

23) Break evaluation on missing socket, from Mate Eckl.

24) Allow to match socket mark from nft_socket, from Mate Eckl.

25) Remove dependency on nf_defrag_ipv6, now that IPv6 tracker is
    built-in into nf_conntrack. From Florian Westphal.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20 22:28:28 -07:00
Máté Eckl 5d400a4933 netfilter: Kconfig: Change select IPv6 dependencies
... from IPV6 to NF_TABLES_IPV6 and IP6_NF_IPTABLES.

In some cases module selects depend on IPV6, but this means that they
select another module even if eg. NF_TABLES_IPV6 is not set in which
case the selected module is useless due to the lack of IPv6 nf_tables
functionality.

The same applies for IP6_NF_IPTABLES and iptables.

Joint work with: Arnd Bermann <arnd@arndb.de>

Signed-off-by: Máté Eckl <ecklm94@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-17 15:27:54 +02:00
Florian Westphal a0ae2562c6 netfilter: conntrack: remove l3proto abstraction
This unifies ipv4 and ipv6 protocol trackers and removes the l3proto
abstraction.

This gets rid of all l3proto indirect calls and the need to do
a lookup on the function to call for l3 demux.

It increases module size by only a small amount (12kbyte), so this reduces
size because nf_conntrack.ko is useless without either nf_conntrack_ipv4
or nf_conntrack_ipv6 module.

before:
   text    data     bss     dec     hex filename
   7357    1088       0    8445    20fd nf_conntrack_ipv4.ko
   7405    1084       4    8493    212d nf_conntrack_ipv6.ko
  72614   13689     236   86539   1520b nf_conntrack.ko
 19K nf_conntrack_ipv4.ko
 19K nf_conntrack_ipv6.ko
179K nf_conntrack.ko

after:
   text    data     bss     dec     hex filename
  79277   13937     236   93450   16d0a nf_conntrack.ko
  191K nf_conntrack.ko

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-17 15:27:49 +02:00
Máté Eckl 7414d929bc netfilter: Kconfig: Make NETFILTER_XT_MATCH_SOCKET select NF_SOCKET_IPV4/6
Instead of depending on it.

Signed-off-by: Máté Eckl <ecklm94@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-16 17:54:57 +02:00
Pablo Neira Ayuso e240cd0df4 netfilter: nf_tables: place all set backends in one single module
This patch disallows rbtree with single elements, which is causing
problems with the recent timeout support. Before this patch, you
could opt out individual set representations per module, which is
just adding extra complexity.

Fixes: 8d8540c4f5e0("netfilter: nft_set_rbtree: add timeout support")
Reported-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-06 19:31:53 +02:00
Pablo Neira Ayuso 290180e244 netfilter: nf_tables: add connlimit support
This features which allows you to limit the maximum number of
connections per arbitrary key. The connlimit expression is stateful,
therefore it can be used from meters to dynamically populate a set, this
provides a mapping to the iptables' connlimit match. This patch also
comes that allows you define static connlimit policies.

This extension depends on the nf_conncount infrastructure.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-06-03 01:18:29 +02:00
Máté Eckl 45ca4e0cf2 netfilter: Libify xt_TPROXY
The extracted functions will likely be usefull to implement tproxy
support in nf_tables.

Extrancted functions:
	- nf_tproxy_sk_is_transparent
	- nf_tproxy_laddr4
	- nf_tproxy_handle_time_wait4
	- nf_tproxy_get_sock_v4
	- nf_tproxy_laddr6
	- nf_tproxy_handle_time_wait6
	- nf_tproxy_get_sock_v6

(nf_)tproxy_handle_time_wait6 also needed some refactor as its current
implementation was xtables-specific.

Signed-off-by: Máté Eckl <ecklm94@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-06-03 00:02:05 +02:00
Máté Eckl 554ced0a6e netfilter: nf_tables: add support for native socket matching
Now it can only match the transparent flag of an ip/ipv6 socket.

Signed-off-by: Máté Eckl <ecklm94@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-06-01 09:46:15 +02:00
Florian Westphal 1ac89d2015 netfilter: nat: merge nf_nat_redirect into nf_nat
Similar to previous patch, this time, merge redirect+nat.
The redirect module is just 2k in size, get rid of it and make
redirect part available from the nat core.

before:
   text    data     bss     dec     hex filename
  19461    1484    4138   25083    61fb net/netfilter/nf_nat.ko
   1236     792       0    2028     7ec net/netfilter/nf_nat_redirect.ko
after:
  20340    1508    4138   25986    6582 net/netfilter/nf_nat.ko

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-05-29 00:25:40 +02:00
Fernando Fernandez Mancera 57a4c9c5c7 netfilter: make NF_OSF non-visible symbol
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-05-23 09:14:06 +02:00
David S. Miller 90278871d4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

The following patchset contains Netfilter/IPVS updates for your net-next
tree, more relevant updates in this batch are:

1) Add Maglev support to IPVS. Moreover, store lastest server weight in
   IPVS since this is needed by maglev, patches from from Inju Song.

2) Preparation works to add iptables flowtable support, patches
   from Felix Fietkau.

3) Hand over flows back to conntrack slow path in case of TCP RST/FIN
   packet is seen via new teardown state, also from Felix.

4) Add support for extended netlink error reporting for nf_tables.

5) Support for larger timeouts that 23 days in nf_tables, patch from
   Florian Westphal.

6) Always set an upper limit to dynamic sets, also from Florian.

7) Allow number generator to make map lookups, from Laura Garcia.

8) Use hash_32() instead of opencode hashing in IPVS, from Vicent Bernat.

9) Extend ip6tables SRH match to support previous, next and last SID,
   from Ahmed Abdelsalam.

10) Move Passive OS fingerprint nf_osf.c, from Fernando Fernandez.

11) Expose nf_conntrack_max through ctnetlink, from Florent Fourcot.

12) Several housekeeping patches for xt_NFLOG, x_tables and ebtables,
   from Taehee Yoo.

13) Unify meta bridge with core nft_meta, then make nft_meta built-in.
   Make rt and exthdr built-in too, again from Florian.

14) Missing initialization of tbl->entries in IPVS, from Cong Wang.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-06 21:51:37 -04:00
Fernando Fernandez Mancera bfb15f2a95 netfilter: extract Passive OS fingerprint infrastructure from xt_osf
Add nf_osf_ttl() and nf_osf_match() into nf_osf.c to prepare for
nf_tables support.

Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-05-07 00:02:11 +02:00
Florian Westphal d0103158cf netfilter: nf_tables: merge exthdr expression into nft core
before:
   text    data     bss     dec     hex filename
   5056     844       0    5900    170c net/netfilter/nft_exthdr.ko
 102456    2316     401  105173   19ad5 net/netfilter/nf_tables.ko

after:
 106410    2392     401  109203   1aa93 net/netfilter/nf_tables.ko

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-04-27 00:00:56 +02:00
Florian Westphal ae1bc6a9f3 netfilter: nf_tables: merge rt expression into nft core
before:
   text    data     bss     dec     hex filename
   2657     844       0    3501     dad net/netfilter/nft_rt.ko
 100826    2240     401  103467   1942b net/netfilter/nf_tables.ko
after:
   2657     844       0    3501     dad net/netfilter/nft_rt.ko
 102456    2316     401  105173   19ad5 net/netfilter/nf_tables.ko

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-04-27 00:00:55 +02:00
Florian Westphal 8a22543c8e netfilter: nf_tables: make meta expression builtin
size net/netfilter/nft_meta.ko
   text    data     bss     dec     hex filename
   5826     936       1    6763    1a6b net/netfilter/nft_meta.ko
  96407    2064     400   98871   18237 net/netfilter/nf_tables.ko

after:
 100826    2240     401  103467   1942b net/netfilter/nf_tables.ko

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-04-27 00:00:46 +02:00
Felix Fietkau 1e80380b14 netfilter: nf_flow_table: relax mixed ipv4/ipv6 flowtable dependencies
Since the offload hook code was moved, this table no longer depends on
the IPv4 and IPv6 flowtable modules

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-04-24 10:28:39 +02:00
Arnd Bergmann a661574370 netfilter: fix CONFIG_NF_REJECT_IPV6=m link error
We get a new link error with CONFIG_NFT_REJECT_INET=y and CONFIG_NF_REJECT_IPV6=m
after larger parts of the nftables modules are linked together:

net/netfilter/nft_reject_inet.o: In function `nft_reject_inet_eval':
nft_reject_inet.c:(.text+0x17c): undefined reference to `nf_send_unreach6'
nft_reject_inet.c:(.text+0x190): undefined reference to `nf_send_reset6'

The problem is that with NF_TABLES_INET set, we implicitly try to use
the ipv6 version as well for NFT_REJECT, but when CONFIG_IPV6 is set to
a loadable module, it's impossible to reach that.

The best workaround I found is to express the above as a Kconfig
dependency, forcing NFT_REJECT itself to be 'm' in that particular
configuration.

Fixes: 02c7b25e5f ("netfilter: nf_tables: build-in filter chain type")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-04-16 17:47:25 +02:00
Pablo Neira Ayuso 02c7b25e5f netfilter: nf_tables: build-in filter chain type
One module per supported filter chain family type takes too much memory
for very little code - too much modularization - place all chain filter
definitions in one single file.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-30 11:29:19 +02:00
Pablo Neira Ayuso 6be3bcd75a netfilter: flowtable infrastructure depends on NETFILTER_INGRESS
config NF_FLOW_TABLE depends on NETFILTER_INGRESS. If users forget to
enable this toggle, flowtable registration fails with EOPNOTSUPP.

Moreover, turn 'select NF_FLOW_TABLE' in every flowtable family flavour
into dependency instead, otherwise this new dependency on
NETFILTER_INGRESS causes a warning. This also allows us to remove the
explicit dependency between family flowtables <-> NF_TABLES and
NF_CONNTRACK, given they depend on the NF_FLOW_TABLE core that already
expresses the general dependencies for this new infrastructure.

Moreover, NF_FLOW_TABLE_INET depends on NF_FLOW_TABLE_IPV4 and
NF_FLOWTABLE_IPV6, which already depends on NF_FLOW_TABLE. So we can get
rid of direct dependency with NF_FLOW_TABLE.

In general, let's avoid 'select', it just makes things more complicated.

Reported-by: John Crispin <john@phrozen.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-02-02 13:21:48 +01:00
Arnd Bergmann 9be9d04b28 netfilter: nf_tables: flow_offload depends on flow_table
Without CONFIG_NF_FLOW_TABLE, the new nft_flow_offload module produces
a link error:

net/netfilter/nft_flow_offload.o: In function `nft_flow_offload_iterate_cleanup':
nft_flow_offload.c:(.text+0xb0): undefined reference to `nf_flow_table_iterate'
net/netfilter/nft_flow_offload.o: In function `flow_offload_iterate_cleanup':
nft_flow_offload.c:(.text+0x160): undefined reference to `flow_offload_dead'
net/netfilter/nft_flow_offload.o: In function `nft_flow_offload_eval':
nft_flow_offload.c:(.text+0xc4c): undefined reference to `flow_offload_alloc'
nft_flow_offload.c:(.text+0xc64): undefined reference to `flow_offload_add'
nft_flow_offload.c:(.text+0xc94): undefined reference to `flow_offload_free'

This adds a Kconfig dependency for it.

Fixes: a3c90f7a23 ("netfilter: nf_tables: flow offload expression")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-16 01:19:16 +01:00
Arnd Bergmann a0a97f2a1a netfilter: improve flow table Kconfig dependencies
The newly added NF_FLOW_TABLE options cause some build failures in
randconfig kernels:

- when CONFIG_NF_CONNTRACK is disabled, or is a loadable module but
  NF_FLOW_TABLE is built-in:

  In file included from net/netfilter/nf_flow_table.c:8:0:
  include/net/netfilter/nf_conntrack.h:59:22: error: field 'ct_general' has incomplete type
    struct nf_conntrack ct_general;
  include/net/netfilter/nf_conntrack.h: In function 'nf_ct_get':
  include/net/netfilter/nf_conntrack.h:148:15: error: 'const struct sk_buff' has no member named '_nfct'
  include/net/netfilter/nf_conntrack.h: In function 'nf_ct_put':
  include/net/netfilter/nf_conntrack.h:157:2: error: implicit declaration of function 'nf_conntrack_put'; did you mean 'nf_ct_put'? [-Werror=implicit-function-declaration]

  net/netfilter/nf_flow_table.o: In function `nf_flow_offload_work_gc':
  (.text+0x1540): undefined reference to `nf_ct_delete'

- when CONFIG_NF_TABLES is disabled:

  In file included from net/ipv6/netfilter/nf_flow_table_ipv6.c:13:0:
  include/net/netfilter/nf_tables.h: In function 'nft_gencursor_next':
  include/net/netfilter/nf_tables.h:1189:14: error: 'const struct net' has no member named 'nft'; did you mean 'nf'?

 - when CONFIG_NF_FLOW_TABLE_INET is enabled, but NF_FLOW_TABLE_IPV4
  or NF_FLOW_TABLE_IPV6 are not, or are loadable modules

  net/netfilter/nf_flow_table_inet.o: In function `nf_flow_offload_inet_hook':
  nf_flow_table_inet.c:(.text+0x94): undefined reference to `nf_flow_offload_ipv6_hook'
  nf_flow_table_inet.c:(.text+0x40): undefined reference to `nf_flow_offload_ip_hook'

- when CONFIG_NF_FLOW_TABLES is disabled, but the other options are
  enabled:

  net/netfilter/nf_flow_table_inet.o: In function `nf_flow_offload_inet_hook':
  nf_flow_table_inet.c:(.text+0x6c): undefined reference to `nf_flow_offload_ipv6_hook'
  net/netfilter/nf_flow_table_inet.o: In function `nf_flow_inet_module_exit':
  nf_flow_table_inet.c:(.exit.text+0x8): undefined reference to `nft_unregister_flowtable_type'
  net/netfilter/nf_flow_table_inet.o: In function `nf_flow_inet_module_init':
  nf_flow_table_inet.c:(.init.text+0x8): undefined reference to `nft_register_flowtable_type'
  net/ipv4/netfilter/nf_flow_table_ipv4.o: In function `nf_flow_ipv4_module_exit':
  nf_flow_table_ipv4.c:(.exit.text+0x8): undefined reference to `nft_unregister_flowtable_type'
  net/ipv4/netfilter/nf_flow_table_ipv4.o: In function `nf_flow_ipv4_module_init':
  nf_flow_table_ipv4.c:(.init.text+0x8): undefined reference to `nft_register_flowtable_type'

This adds additional Kconfig dependencies to ensure that NF_CONNTRACK and NF_TABLES
are always visible from NF_FLOW_TABLE, and that the internal dependencies between
the four new modules are met.

Fixes: 7c23b629a8 ("netfilter: flow table support for the mixed IPv4/IPv6 family")
Fixes: 0995210753 ("netfilter: flow table support for IPv6")
Fixes: 97add9f0d6 ("netfilter: flow table support for IPv4")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-10 18:18:18 +01:00
Pablo Neira Ayuso a3c90f7a23 netfilter: nf_tables: flow offload expression
Add new instruction for the nf_tables VM that allows us to specify what
flows are offloaded into a given flow table via name. This new
instruction creates the flow entry and adds it to the flow table.

Only established flows, ie. we have seen traffic in both directions, are
added to the flow table. You can still decide to offload entries at a
later stage via packet counting or checking the ct status in case you
want to offload assured conntracks.

This new extension depends on the conntrack subsystem.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:11:10 +01:00
Pablo Neira Ayuso 7c23b629a8 netfilter: flow table support for the mixed IPv4/IPv6 family
This patch adds the IPv6 flow table type, that implements the datapath
flow table to forward IPv6 traffic.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:11:09 +01:00
Pablo Neira Ayuso ac2a66665e netfilter: add generic flow table infrastructure
This patch defines the API to interact with flow tables, this allows to
add, delete and lookup for entries in the flow table. This also adds the
generic garbage code that removes entries that have expired, ie. no
traffic has been seen for a while.

Users of the flow table infrastructure can delete entries via
flow_offload_dead(), which sets the dying bit, this signals the garbage
collector to release an entry from user context.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08 18:11:07 +01:00