Commit Graph

130 Commits

Author SHA1 Message Date
Julius Werner 32829da54d drivers: char: mem: Fix wraparound check to allow mappings up to the end
A recent fix to /dev/mem prevents mappings from wrapping around the end
of physical address space. However, the check was written in a way that
also prevents a mapping reaching just up to the end of physical address
space, which may be a valid use case (especially on 32-bit systems).
This patch fixes it by checking the last mapped address (instead of the
first address behind that) for overflow.

Fixes: b299cde245 ("drivers: char: mem: Check for address space wraparound with mmap()")
Cc: <stable@vger.kernel.org>
Reported-by: Nico Huber <nico.h@gmx.de>
Signed-off-by: Julius Werner <jwerner@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03 18:56:04 +09:00
Julius Werner b299cde245 drivers: char: mem: Check for address space wraparound with mmap()
/dev/mem currently allows mmap() mappings that wrap around the end of
the physical address space, which should probably be illegal. It
circumvents the existing STRICT_DEVMEM permission check because the loop
immediately terminates (as the start address is already higher than the
end address). On the x86_64 architecture it will then cause a panic
(from the BUG(start >= end) in arch/x86/mm/pat.c:reserve_memtype()).

This patch adds an explicit check to make sure offset + size will not
wrap around in the physical address type.

Signed-off-by: Julius Werner <jwerner@chromium.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-18 16:53:55 +02:00
Kees Cook a4866aa812 mm: Tighten x86 /dev/mem with zeroing reads
Under CONFIG_STRICT_DEVMEM, reading System RAM through /dev/mem is
disallowed. However, on x86, the first 1MB was always allowed for BIOS
and similar things, regardless of it actually being System RAM. It was
possible for heap to end up getting allocated in low 1MB RAM, and then
read by things like x86info or dd, which would trip hardened usercopy:

usercopy: kernel memory exposure attempt detected from ffff880000090000 (dma-kmalloc-256) (4096 bytes)

This changes the x86 exception for the low 1MB by reading back zeros for
System RAM areas instead of blindly allowing them. More work is needed to
extend this to mmap, but currently mmap doesn't go through usercopy, so
hardened usercopy won't Oops the kernel.

Reported-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Tested-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
2017-04-12 11:40:23 -07:00
Robin Murphy 488debb997 drivers: char: mem: Fix thinkos in kmem address checks
When borrowing the pfn_valid() check from mmap_kmem(), somebody managed
to get physical and virtual addresses spectacularly muddled up, such
that we've ended up with checks for one being the other. Whilst this
does indeed prevent out-of-bounds accesses crashing, on most systems
it also prevents the more desirable use-case of working at all ever.

Check the *virtual* offset correctly for what it is. Furthermore, do
so in the right place - a read or write may span multiple pages, so a
single up-front check is insufficient. High memory accesses already
have a similar validity check just before the copy_to_user() call, so
just make the low memory path fully consistent with that.

Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
CC: stable@vger.kernel.org
Fixes: 148a1bc843 ("drivers: char: mem: Check {read,write}_kmem() addresses")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-11 08:02:18 +01:00
Robin Murphy 148a1bc843 drivers: char: mem: Check {read,write}_kmem() addresses
Arriving at read_kmem() with an offset representing a bogus kernel
address (e.g. 0 from a simple "cat /dev/kmem") leads to copy_to_user
faulting on the kernel-side read.

x86_64 happens to get away with this since the optimised implementation
uses "rep movs*", thus the user write (which is allowed to fault) and
the kernel read are the same instruction, the kernel-side fault falls
into the user-side fixup handler and the chain of events which
transpires ends up returning an error as one might expect, even if it's
an inappropriate -EFAULT. On other architectures, though, the read is
not covered by the fixup entry for the write, and we get a big scary
"Unable to hande kernel paging request..." dump.

The more typical use-case of mmap_kmem() has always (within living
memory at least) returned -EIO for addresses which don't satisfy
pfn_valid(), so let's make that consistent across {read,write}_kem()
too.

Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 15:21:18 +02:00
Hugh Dickins c01d5b3007 shmem: get_unmapped_area align huge page
Provide a shmem_get_unmapped_area method in file_operations, called at
mmap time to decide the mapping address.  It could be conditional on
CONFIG_TRANSPARENT_HUGEPAGE, but save #ifdefs in other places by making
it unconditional.

shmem_get_unmapped_area() first calls the usual mm->get_unmapped_area
(which we treat as a black box, highly dependent on architecture and
config and executable layout).  Lots of conditions, and in most cases it
just goes with the address that chose; but when our huge stars are
rightly aligned, yet that did not provide a suitable address, go back to
ask for a larger arena, within which to align the mapping suitably.

There have to be some direct calls to shmem_get_unmapped_area(), not via
the file_operations: because of the way shmem_zero_setup() is called to
create a shmem object late in the mmap sequence, when MAP_SHARED is
requested with MAP_ANONYMOUS or /dev/zero.  Though this only matters
when /proc/sys/vm/shmem_huge has been set.

Link: http://lkml.kernel.org/r/1466021202-61880-29-git-send-email-kirill.shutemov@linux.intel.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 16:19:19 -07:00
Jiri Kosina 39380b80d7 x86/mm/pat, /dev/mem: Remove superfluous error message
Currently it's possible for broken (or malicious) userspace to flood a
kernel log indefinitely with messages a-la

	Program dmidecode tried to access /dev/mem between f0000->100000

because range_is_allowed() is case of CONFIG_STRICT_DEVMEM being turned on
dumps this information each and every time devmem_is_allowed() fails.

Reportedly userspace that is able to trigger contignuous flow of these
messages exists.

It would be possible to rate limit this message, but that'd have a
questionable value; the administrator wouldn't get information about all
the failing accessess, so then the information would be both superfluous
and incomplete at the same time :)

Returning EPERM (which is what is actually happening) is enough indication
for userspace what has happened; no need to log this particular error as
some sort of special condition.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1607081137020.24757@cbobk.fhfr.pm
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-08 11:52:58 +02:00
Andrzej Hajda ecb63a1b64 drivers: char: mem: fix IS_ERROR_VALUE usage
IS_ERR_VALUE macro should be used only with unsigned long type.
Specifically it works incorrectly with longer types.

The patch follows conclusion from discussion on LKML [1][2].

[1]: http://permalink.gmane.org/gmane.linux.kernel/2120927
[2]: http://permalink.gmane.org/gmane.linux.kernel/2150581

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-05 12:19:39 -08:00
Al Viro 5955102c99 wrappers for ->i_mutex access
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).

Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-22 18:04:28 -05:00
Al Viro cd28e28d80 switch drivers/char/mem.c to ->read_iter/->write_iter
Note that _these_ guys have ->read() and ->write() left in place - they are
eqiuvalent to what we'd get if we replaced those with NULL, but we are
talking about hot paths here.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11 22:29:40 -04:00
Al Viro 5d5d568975 make new_sync_{read,write}() static
All places outside of core VFS that checked ->read and ->write for being NULL or
called the methods directly are gone now, so NULL {read,write} with non-NULL
{read,write}_iter will do the right thing in all cases.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11 22:29:40 -04:00
Christoph Hellwig e2e40f2c1e fs: move struct kiocb to fs.h
struct kiocb now is a generic I/O container, so move it to fs.h.
Also do a #include diet for aio.h while we're at it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-25 20:28:11 -04:00
Linus Torvalds 4ba63072b9 Char / Misc patches for 3.20-rc1
Here's the big char/misc driver update for 3.20-rc1.
 
 Lots of little things in here, all described in the changelog.  Nothing
 major or unusual, except maybe the binder selinux stuff, which was all
 acked by the proper selinux people and they thought it best to come
 through this tree.
 
 All of this has been in linux-next with no reported issues for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlTgs80ACgkQMUfUDdst+yn86gCeMLbxANGExVLd+PR46GNsAUQb
 SJ4AmgIqrkIz+5LCwZWM02ldbYhPeBVf
 =lfmM
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc patches from Greg KH:
 "Here's the big char/misc driver update for 3.20-rc1.

  Lots of little things in here, all described in the changelog.
  Nothing major or unusual, except maybe the binder selinux stuff, which
  was all acked by the proper selinux people and they thought it best to
  come through this tree.

  All of this has been in linux-next with no reported issues for a while"

* tag 'char-misc-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits)
  coresight: fix function etm_writel_cp14() parameter order
  coresight-etm: remove check for unknown Kconfig macro
  coresight: fixing CPU hwid lookup in device tree
  coresight: remove the unnecessary function coresight_is_bit_set()
  coresight: fix the debug AMBA bus name
  coresight: remove the extra spaces
  coresight: fix the link between orphan connection and newly added device
  coresight: remove the unnecessary replicator property
  coresight: fix the replicator subtype value
  pdfdocs: Fix 'make pdfdocs' failure for 'uio-howto.tmpl'
  mcb: Fix error path of mcb_pci_probe
  virtio/console: verify device has config space
  ti-st: clean up data types (fix harmless memory corruption)
  mei: me: release hw from reset only during the reset flow
  mei: mask interrupt set bit on clean reset bit
  extcon: max77693: Constify struct regmap_config
  extcon: adc-jack: Release IIO channel on driver remove
  extcon: Remove duplicated include from extcon-class.c
  Drivers: hv: vmbus: hv_process_timer_expiration() can be static
  Drivers: hv: vmbus: serialize Offer and Rescind offer
  ...
2015-02-15 10:48:44 -08:00
Christoph Hellwig b4caecd480 fs: introduce f_op->mmap_capabilities for nommu mmap support
Since "BDI: Provide backing device capability information [try #3]" the
backing_dev_info structure also provides flags for the kind of mmap
operation available in a nommu environment, which is entirely unrelated
to it's original purpose.

Introduce a new nommu-only file operation to provide this information to
the nommu mmap code instead.  Splitting this from the backing_dev_info
structure allows to remove lots of backing_dev_info instance that aren't
otherwise needed, and entirely gets rid of the concept of providing a
backing_dev_info for a character device.  It also removes the need for
the mtd_inodefs filesystem.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tejun Heo <tj@kernel.org>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-20 14:02:58 -07:00
Rob Ward 6a0061badd drivers: char: mem: Fix Missing blank line issues
Fixes "Missing a blank line after declarations" reported by
checkpatch.

This patch introduces no functional changes.

Signed-off-by: Rob Ward <robert.ward114@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12 05:04:11 -08:00
Rob Ward 35b6c7e4a5 drivers: char: mem: Replace usage of asm include
Replaces the use of asm/uaccess.h with linux/uaccess.h.

Signed-off-by: Rob Ward <robert.ward114@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12 05:04:11 -08:00
Rob Ward 3a4bc2fb80 drivers: char: mem: Simplify DEVPORT configuration
Simplify the use of CONFIG_DEVPORT by making the port_fops
so that it includes __maybe_unused.

This enabled the multiple #ifdef's used for this structure
to be removed and brings it in line with the use of CONFIG_DEVMEM

This change should introduce no functional changes.

Signed-off-by: Rob Ward <robert.ward114@googlemail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12 05:04:11 -08:00
Rob Ward a8c912522b drivers: char: mem: Simplify DEVKMEM configuration
Simplify the use of CONFIG_DEVKMEM by making the kmem_fops
so that it is __maybe_unused.

This enabled the multiple #ifdef's used for this structure
to be removed and brings it in line with the use of CONFIG_DEVMEM

This change should introduce no functional changes.

Signed-off-by: Rob Ward <robert.ward114@googlemail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12 05:04:11 -08:00
Rob Ward 73f0718e74 drivers: char: mem: Make /dev/mem an optional device
Adds Kconfig option CONFIG_DEVMEM that allows the
/dev/mem device to be disabled.

Option defaults to /dev/mem enabled.

Signed-off-by: Rob Ward <robert.ward114@googlemail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12 05:04:11 -08:00
Thierry Reding 4707a341b4 /dev/mem: Use more consistent data types
The xlate_dev_{kmem,mem}_ptr() functions take either a physical address
or a kernel virtual address, so data types should be phys_addr_t and
void *. They both return a kernel virtual address which is only ever
used in calls to copy_{from,to}_user(), so make variables that store it
void * rather than char * for consistency.

Also only define a weak unxlate_dev_mem_ptr() function if architectures
haven't overridden them in the asm/io.h header file.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-10 15:59:21 +01:00
Al Viro 13ba33e899 switch /dev/zero and /dev/full to ->read_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-10-09 02:39:08 -04:00
Petr Tesarik 08d2d00b29 /dev/mem: handle out-of-bounds read/write
The loff_t type may be wider than phys_addr_t (e.g. on 32-bit systems).
Consequently, the file offset may be truncated in the assignment.
Currently, /dev/mem wraps around, which may cause applications to read
or write incorrect regions of memory by accident.

Let's follow POSIX file semantics here and return 0 when reading from
and -EFBIG when writing to an offset that cannot be represented by a
phys_addr_t.

Note that the conditional is optimized out by the compiler if loff_t
has the same size as phys_addr_t.

Signed-off-by: Petr Tesarik <ptesarik@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-15 11:51:02 -08:00
Grygorii Strashko 869a84e1ca mm/memblock: remove unnecessary inclusions of bootmem.h
Clean-up to remove depedency with bootmem headers.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:46 -08:00
Zhang Yanfei a11edb59a0 /dev/oldmem: Remove the interface
/dev/oldmem provides the interface for us to access the "old memory" in
the dump-capture kernel.  Unfortunately, no one actually uses this
interface.

And this interface could actually cause some real problems if used on ia64
where the cached/uncached accesses are mixed.  See the discussion from the
link: https://lkml.org/lkml/2013/4/12/386.

So Eric suggested that we should remove /dev/oldmem as an unused piece of
code.

[akpm@linux-foundation.org: mention /dev/oldmem obsolescence in devices.txt]
Suggested-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:08:03 -07:00
Rasmus Villemoes 71811f3271 drivers: char: mem: use IS_ERR_VALUE() in memory_lseek()
Use IS_ERR_VALUE() instead of comparing the new offset to a hard-coded
value of -MAX_ERRNO (which is also off-by-one due to the use of ~
instead of -).

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-06 12:54:08 -07:00
Kent Overstreet a27bb332c0 aio: don't include aio.h in sched.h
Faster kernel compiles by way of fewer unnecessary includes.

[akpm@linux-foundation.org: fix fallout]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Kent Overstreet <koverstreet@google.com>
Cc: Zach Brown <zab@redhat.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Reviewed-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07 20:16:25 -07:00
Zach Brown 162934de51 char: add aio_{read,write} to /dev/{null,zero}
These are handy for measuring the cost of the aio infrastructure with
operations that do very little and complete immediately.

Signed-off-by: Zach Brown <zab@redhat.com>
Signed-off-by: Kent Overstreet <koverstreet@google.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Reviewed-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07 18:38:28 -07:00
Linus Torvalds d895cb1af1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile (part one) from Al Viro:
 "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
  locking violations, etc.

  The most visible changes here are death of FS_REVAL_DOT (replaced with
  "has ->d_weak_revalidate()") and a new helper getting from struct file
  to inode.  Some bits of preparation to xattr method interface changes.

  Misc patches by various people sent this cycle *and* ocfs2 fixes from
  several cycles ago that should've been upstream right then.

  PS: the next vfs pile will be xattr stuff."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
  saner proc_get_inode() calling conventions
  proc: avoid extra pde_put() in proc_fill_super()
  fs: change return values from -EACCES to -EPERM
  fs/exec.c: make bprm_mm_init() static
  ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
  ocfs2: fix possible use-after-free with AIO
  ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
  get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
  target: writev() on single-element vector is pointless
  export kernel_write(), convert open-coded instances
  fs: encode_fh: return FILEID_INVALID if invalid fid_type
  kill f_vfsmnt
  vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
  nfsd: handle vfs_getattr errors in acl protocol
  switch vfs_getattr() to struct path
  default SET_PERSONALITY() in linux/elf.h
  ceph: prepopulate inodes only when request is aborted
  d_hash_and_lookup(): export, switch open-coded instances
  9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
  9p: split dropping the acls from v9fs_set_create_acl()
  ...
2013-02-26 20:16:07 -08:00
Al Viro 496ad9aa8e new helper: file_inode(file)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22 23:31:31 -05:00
Hans Grob 890537b3ac drivers/char/mem.c: fix small coding style issues
This patch fixes four foo * bar errors, and one trailing whitespace
complaint from checkpatch.pl

Signed-off-by: Hans Grob <H.Grob@physik.uni-muenchen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-06 11:21:51 -08:00
Cyril Chemparathy 7e6735c357 /dev/mem: use phys_addr_t for physical addresses
This patch fixes the /dev/mem driver to use phys_addr_t for physical
addresses.  This is required on PAE systems, especially those that run
entirely out of >4G physical memory space.

Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-24 15:32:50 -07:00
Konstantin Khlebnikov 314e51b985 mm: kill vma flag VM_RESERVED and mm->reserved_vm counter
A long time ago, in v2.4, VM_RESERVED kept swapout process off VMA,
currently it lost original meaning but still has some effects:

 | effect                 | alternative flags
-+------------------------+---------------------------------------------
1| account as reserved_vm | VM_IO
2| skip in core dump      | VM_IO, VM_DONTDUMP
3| do not merge or expand | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP
4| do not mlock           | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP

This patch removes reserved_vm counter from mm_struct.  Seems like nobody
cares about it, it does not exported into userspace directly, it only
reduces total_vm showed in proc.

Thus VM_RESERVED can be replaced with VM_IO or pair VM_DONTEXPAND | VM_DONTDUMP.

remap_pfn_range() and io_remap_pfn_range() set VM_IO|VM_DONTEXPAND|VM_DONTDUMP.
remap_vmalloc_range() set VM_DONTEXPAND | VM_DONTDUMP.

[akpm@linux-foundation.org: drivers/vfio/pci/vfio_pci.c fixup]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Venkatesh Pallipadi <venki@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:22:19 +09:00
Haren Myneni e1612de9e4 powerpc: Disable /dev/port interface on systems without an ISA bridge
Some power systems do not have legacy ISA devices. So, /dev/port is not
a valid interface on these systems. User level tools such as kbdrate is
trying to access the device using this interface which is causing the
system crash.

This patch will fix this issue by not creating this interface on these
powerpc systems.

Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-07-11 18:22:32 +10:00
Kay Sievers 7f3a781d6f printk - fix compilation for CONFIG_PRINTK=n
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09 15:51:09 -07:00
Kay Sievers e11fea92e1 kmsg: export printk records to the /dev/kmsg interface
Support for multiple concurrent readers of /dev/kmsg, with read(),
seek(), poll() support. Output of message sequence numbers, to allow
userspace log consumers to reliably reconnect and reconstruct their
state at any given time. After open("/dev/kmsg"), read() always
returns *all* buffered records. If only future messages should be
read, SEEK_END can be used. In case records get overwritten while
/dev/kmsg is held open, or records get faster overwritten than they
are read, the next read() will return -EPIPE and the current reading
position gets updated to the next available record. The passed
sequence numbers allow the log consumer to calculate the amount of
lost messages.

  [root@mop ~]# cat /dev/kmsg
  5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ...
  6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  7,160,424069;pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
   SUBSYSTEM=acpi
   DEVICE=+acpi:PNP0A03:00
  6,339,5140900;NET: Registered protocol family 10
  30,340,5690716;udevd[80]: starting version 181
  6,341,6081421;FDC 0 is a S82078B
  6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0
  7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0
   SUBSYSTEM=scsi
   DEVICE=+scsi:1:0:0:0
  6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0

Cc: Karel Zak <kzak@redhat.com>
Tested-by: William Douglas <william.douglas@intel.com>
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-07 17:03:27 -07:00
Kay Sievers 7ff9554bb5 printk: convert byte-buffer to variable-length record buffer
- Record-based stream instead of the traditional byte stream
  buffer. All records carry a 64 bit timestamp, the syslog facility
  and priority in the record header.

- Records consume almost the same amount, sometimes less memory than
  the traditional byte stream buffer (if printk_time is enabled). The record
  header is 16 bytes long, plus some padding bytes at the end if needed.
  The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for
  the timestamp and a newline.

- Buffer management is based on message sequence numbers. When records
  need to be discarded, the reading heads move on to the next full
  record. Unlike the byte-stream buffer, no old logged lines get
  truncated or partly overwritten by new ones. Sequence numbers also
  allow consumers of the log stream to get notified if any message in
  the stream they are about to read gets discarded during the time
  of reading.

- Better buffered IO support for KERN_CONT continuation lines, when printk()
  is called multiple times for a single line. The use of KERN_CONT is now
  mandatory to use continuation; a few places in the kernel need trivial fixes
  here. The buffering could possibly be extended to per-cpu variables to allow
  better thread-safety for multiple printk() invocations for a single line.

- Full-featured syslog facility value support. Different facilities
  can tag their messages. All userspace-injected messages enforce a
  facility value > 0 now, to be able to reliably distinguish them from
  the kernel-generated messages. Independent subsystems like a
  baseband processor running its own firmware, or a kernel-related
  userspace process can use their own unique facility values. Multiple
  independent log streams can co-exist that way in the same
  buffer. All share the same global sequence number counter to ensure
  proper ordering (and interleaving) and to allow the consumers of the
  log to reliably correlate the events from different facilities.

Tested-by: William Douglas <william.douglas@intel.com>
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-07 16:53:02 -07:00
Al Viro 2c9ede55ec switch device_get_devnode() and ->devnode() to umode_t *
both callers of device_get_devnode() are only interested in lower 16bits
and nobody tries to return anything wider than 16bit anyway.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:55 -05:00
Paul Gortmaker 66300e66c6 drivers/char: Add export.h for EXPORT_SYMBOL/THIS_MODULE as required
They will need it called out explicitly in the near future due
to a module.h usage cleanup that removes its implicit presence
everywhere.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:41 -04:00
Andrew Morton 70a5f52165 kmsg: properly support writev to avoid interleaved printk lines fix
make `len' size_t, avoid multiple-assignments.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Lennart Poettering <lennart@poettering.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-19 17:00:48 -07:00
Kay Sievers 7e5b58bcbc printk: /dev/kmsg - properly support writev() to avoid interleaved printk() lines
printk: /dev/kmsg - properly support writev() to avoid interleaved printk lines

We should avoid calling printk() in a loop, when we pass a single
string to /dev/kmsg with writev().

Cc: Lennart Poettering <lennart@poettering.net>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-19 16:59:58 -07:00
Changli Gao cfaf346cb2 drivers/char/mem.c: clean up the code
Reduce the lines of code and simplify the logic.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:46:40 -07:00
KAMEZAWA Hiroyuki 4a3956c790 vfs: introduce FMODE_UNSIGNED_OFFSET for allowing negative f_pos
Now, rw_verify_area() checsk f_pos is negative or not.  And if negative,
returns -EINVAL.

But, some special files as /dev/(k)mem and /proc/<pid>/mem etc..  has
negative offsets.  And we can't do any access via read/write to the
file(device).

So introduce FMODE_UNSIGNED_OFFSET to allow negative file offsets.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-25 21:18:21 -04:00
Linus Torvalds 092e0e7e52 Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  vfs: make no_llseek the default
  vfs: don't use BKL in default_llseek
  llseek: automatically add .llseek fop
  libfs: use generic_file_llseek for simple_attr
  mac80211: disallow seeks in minstrel debug code
  lirc: make chardev nonseekable
  viotape: use noop_llseek
  raw: use explicit llseek file operations
  ibmasmfs: use generic_file_llseek
  spufs: use llseek in all file operations
  arm/omap: use generic_file_llseek in iommu_debug
  lkdtm: use generic_file_llseek in debugfs
  net/wireless: use generic_file_llseek in debugfs
  drm: use noop_llseek
2010-10-22 10:52:56 -07:00
Arnd Bergmann 6038f373a3 llseek: automatically add .llseek fop
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.

The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.

New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time.  Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.

The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.

Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.

Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.

===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
//   but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}

@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}

@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
   *off = E
|
   *off += E
|
   func(..., off, ...)
|
   E = *off
)
...+>
}

@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}

@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
  *off = E
|
  *off += E
|
  func(..., off, ...)
|
  E = *off
)
...+>
}

@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}

@ fops0 @
identifier fops;
@@
struct file_operations fops = {
 ...
};

@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
 .llseek = llseek_f,
...
};

@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
 .read = read_f,
...
};

@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
 .write = write_f,
...
};

@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
 .open = open_f,
...
};

// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
...  .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};

@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
...  .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};

// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
...  .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};

// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};

// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};

@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+	.llseek = default_llseek, /* write accesses f_pos */
};

// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////

@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
 .write = write_f,
 .read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};

@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};

@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};

@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
2010-10-15 15:53:27 +02:00
Jan Kara 371d217ee1 char: Mark /dev/zero and /dev/kmem as not capable of writeback
These devices don't do any writeback but their device inodes still can get
dirty so mark bdi appropriately so that bdi code does the right thing and files
inodes to lists of bdi carrying the device inodes.

Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-22 09:48:47 +02:00
David Howells 31d1d48e19 Fix init ordering of /dev/console vs callers of modprobe
Make /dev/console get initialised before any initialisation routine that
invokes modprobe because if modprobe fails, it's going to want to open
/dev/console, presumably to write an error message to.

The problem with that is that if the /dev/console driver is not yet
initialised, the chardev handler will call request_module() to invoke
modprobe, which will fail, because we never compile /dev/console as a
module.

This will lead to a modprobe loop, showing the following in the kernel
log:

	request_module: runaway loop modprobe char-major-5-1
	request_module: runaway loop modprobe char-major-5-1
	request_module: runaway loop modprobe char-major-5-1
	request_module: runaway loop modprobe char-major-5-1
	request_module: runaway loop modprobe char-major-5-1

This can happen, for example, when the built in md5 module can't find
the built in cryptomgr module (because the latter fails to initialise).
The md5 module comes before the call to tty_init(), presumably because
'crypto' comes before 'drivers' alphabetically.

Fix this by calling tty_init() from chrdev_init().

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-06 09:17:02 -07:00
David Howells ea56f411ec frv: hide uncached_access() when pgprot_noncached is not #defined
Hide uncached_access() when pgprot_noncached is not #defined.  This prevents
the following warning:

	  CC      drivers/char/mem.o
	drivers/char/mem.c:229: warning: 'uncached_access' defined but not used

Repairs d7d4d849b4 ("drivers/char/mem.c:
cleanups").

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-07 08:38:05 -07:00
Eric Dumazet ee5d2acd5c /dev/mem: allow rewinding
commit dcefafb6 ("/dev/mem: dont allow seek to last page") inadvertently
disabled rewinding on /dev/mem.

This broke x86info for example.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-07 08:38:04 -07:00
Anton Blanchard 6e191f7bb0 devmem: handle class_create() failure
I hit this when we had a bug in IDR for a few days.  Basically sysfs would
fail to create new inodes since it uses an IDR and therefore class_create
would fail.

While we are unlikely to see this fail we may as well handle it instead of
oopsing.

Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-07 08:38:03 -07:00
Andrew Morton d7d4d849b4 drivers/char/mem.c: cleanups
- fix switch statement layout

- fix whitespace stuff

- fix comment layout

- remove unneeded inlining

- use __weak

- remove trailing whitespace

- move uncached_access() inside `#ifndef __HAVE_PHYS_MEM_ACCESS_PROT' - it
  is otherwise unused.

Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12 15:52:35 -08:00