Commit Graph

64 Commits

Author SHA1 Message Date
Matt Ranostay c2a49fe8ee pps: fix padding issue with PPS_FETCH for ioctl_compat
Issue is that x86 32-bit aligns to 4-bytes instead of 8-bytes
so this patchset works around the issue and corrects the data
returned in pps_fdata_compat.

Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17 15:10:49 +09:00
Matt Ranostay 2ac6665701 pps: add ioctl_compat function to correct ioctl definitions
ioctl definitions use the pointer size of the architecture which
is fine when userspace and kernel are the same bitsize. This
patchset workarounds an issue with mixed bitsize kernel + userspace
by rewriting the cmd to the kernelspace architecture pointer size.

Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17 15:10:49 +09:00
Maciej S. Szmigiero ab47deb6bb pps: kc: fix non-tickless system config dependency
CONFIG_NO_HZ currently only sets the default value of dynticks config so
if PPS kernel consumer needs periodic timer ticks it should depend on
!CONFIG_NO_HZ_COMMON instead of !CONFIG_NO_HZ.

Otherwise it is possible to enable it even on tickless system which has
CONFIG_NO_HZ not set and CONFIG_NO_HZ_IDLE (or CONFIG_NO_HZ_FULL) set.

Link: http://lkml.kernel.org/r/57E2B769.50202@maciej.szmigiero.name
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11 15:06:32 -07:00
Jiri Slaby 368301f2fe pps: do not crash when failed to register
With this command sequence:

  modprobe plip
  modprobe pps_parport
  rmmod pps_parport

the partport_pps modules causes this crash:

  BUG: unable to handle kernel NULL pointer dereference at (null)
  IP: parport_detach+0x1d/0x60 [pps_parport]
  Oops: 0000 [#1] SMP
  ...
  Call Trace:
    parport_unregister_driver+0x65/0xc0 [parport]
    SyS_delete_module+0x187/0x210

The sequence that builds up to this is:

 1) plip is loaded and takes the parport device for exclusive use:

    plip0: Parallel port at 0x378, using IRQ 7.

 2) pps_parport then fails to grab the device:

    pps_parport: parallel port PPS client
    parport0: cannot grant exclusive access for device pps_parport
    pps_parport: couldn't register with parport0

 3) rmmod of pps_parport is then killed because it tries to access
    pardev->name, but pardev (taken from port->cad) is NULL.

So add a check for NULL in the test there too.

Link: http://lkml.kernel.org/r/20160714115245.12651-1-jslaby@suse.cz
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-23 10:25:54 +09:00
Arnd Bergmann ade1bdffe9 ntp/pps: use y2038 safe types in pps_event_time
The pps_event_time uses two 'timespec' structures internally, which
suffer from the y2038 problem. The uses of this structure are
fairly self-contained in the pps code, so this replaces them all at
once.

Unfortunately, this includes the sfc ethernet driver aside from the
pps subsystem, so we change that one as well. Both touch the
same data structure, and there probably is no good way to split
the patch into smaller units.

Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-10-01 09:59:16 -07:00
Arnd Bergmann 7ec88e4be4 ntp/pps: use timespec64 for hardpps()
There is only one user of the hardpps function in the kernel, so
it makes sense to atomically change it over to using 64-bit
timestamps for y2038 safety. In the hardpps implementation,
we also need to change the pps_normtime structure, which is
similar to struct timespec and also requires a 64-bit
seconds portion.

This introduces two temporary variables in pps_kc_event() to
do the conversion, they will be removed again in the next step,
which seemed preferable to having a larger patch changing it
all at the same time.

Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-10-01 09:57:59 -07:00
Wolfram Sang da2612af00 pps: clients: drop owner assignment from platform_drivers
A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20 16:21:28 +02:00
Sachin Kamat 1a10bd9424 drivers/pps/clients/pps-gpio.c: remove redundant of_match_ptr
The data structure of_match_ptr() protects is always compiled in.  Hence
of_match_ptr() is not needed.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:35 +09:00
Martin Schwidefsky 0244ad004a Remove GENERIC_HARDIRQ config option
After the last architecture switched to generic hard irqs the config
options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code
for !CONFIG_GENERIC_HARDIRQS can be removed.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-13 15:09:52 +02:00
Jingoo Han b67fb086f3 drivers/pps/clients/pps-gpio.c: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release or on
probe failure.  Thus, it is not needed to manually clear the device driver
data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:59:34 -07:00
Greg Kroah-Hartman bd0eae4e1c PPS: convert class code to use dev_groups
The dev_attrs field of struct class is going away soon, dev_groups
should be used instead.  This converts the pps class code to use the
correct field.

Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-19 21:22:34 -07:00
Jan Luebbe c5dbcf8b70 pps-gpio: add device-tree binding and support
Instead of allocating a struct pps_gpio_platform_data in the DT case,
store the necessary information in struct pps_gpio_device_data itself.
This avoids an additional allocation and the ifdef.  It also gets rid of
some indirection.

Also use dev_err instead of pr_err in the changed code.

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:08:06 -07:00
Jan Luebbe 05212be363 drivers/pps/clients/pps-gpio.c: convert to module_platform_driver
This removes some boilerplate code (no functional changes).

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:08:06 -07:00
Jan Luebbe 2a65182235 drivers/pps/clients/pps-gpio.c: convert to devm_* helpers
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:08:06 -07:00
Linus Torvalds 20b4fb4852 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull VFS updates from Al Viro,

Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).

7kloc removed.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
  don't bother with deferred freeing of fdtables
  proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
  proc: Make the PROC_I() and PDE() macros internal to procfs
  proc: Supply a function to remove a proc entry by PDE
  take cgroup_open() and cpuset_open() to fs/proc/base.c
  ppc: Clean up scanlog
  ppc: Clean up rtas_flash driver somewhat
  hostap: proc: Use remove_proc_subtree()
  drm: proc: Use remove_proc_subtree()
  drm: proc: Use minor->index to label things, not PDE->name
  drm: Constify drm_proc_list[]
  zoran: Don't print proc_dir_entry data in debug
  reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
  proc: Supply an accessor for getting the data from a PDE's parent
  airo: Use remove_proc_subtree()
  rtl8192u: Don't need to save device proc dir PDE
  rtl8187se: Use a dir under /proc/net/r8180/
  proc: Add proc_mkdir_data()
  proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
  proc: Move PDE_NET() to fs/proc/proc_net.c
  ...
2013-05-01 17:51:54 -07:00
Fengguang Wu 97439d0f84 pps: pps_kc_hardpps_lock can be static
drivers/pps/kc.c:37:1: sparse: symbol 'pps_kc_hardpps_lock' was not declared. Should it be static?
drivers/pps/kc.c:39:19: sparse: symbol 'pps_kc_hardpps_dev' was not declared. Should it be static?
drivers/pps/kc.c:40:5: sparse: symbol 'pps_kc_hardpps_mode' was not declared. Should it be static?

Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 17:04:08 -07:00
Florian Fainelli 1a0f39997c pps: hide more configuration symbols behind CONFIG_PPS
Make CONFIG_PPS_DEBUG and CONFIG_NTP_PPS be hidden if CONFIG_PPS is not
selected, so that we are not prompted for these configuration options if
CONFIG_PPS is not set.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 17:04:08 -07:00
David Howells 0d01ff2583 Include missing linux/slab.h inclusions
Include missing linux/slab.h inclusions where the source file is currently
expecting to get kmalloc() and co. through linux/proc_fs.h.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cc: linux-s390@vger.kernel.org
cc: sparclinux@vger.kernel.org
cc: linux-efi@vger.kernel.org
cc: linux-mtd@lists.infradead.org
cc: devel@driverdev.osuosl.org
cc: x86@kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-29 15:42:01 -04:00
Julia Lawall 507063b2a4 drivers/pps/clients/pps-gpio.c: use devm_kzalloc
devm_kzalloc allocates memory that is released when a driver detaches.
This patch uses devm_kzalloc for data that is allocated in the probe
function of a platform device and is only freed in the remove function.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:23 -08:00
Tejun Heo 19dd2da3b4 pps: convert to idr_alloc()
Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:18 -08:00
George Spelvin 593fb1ae45 pps: Move timestamp read into PPS code proper
The PPS (Pulse-Per-Second) line discipline has developed a number of
unhealthy attachments to core tty data and functions, ultimately leading
to its breakage.

The previous patches fixed the crashing.  This one reduces coupling further
by eliminating the timestamp parameter from the dcd_change ldisc method.
This reduces header file linkage and makes the extension more generic,
and the timestamp read is delayed only slightly, from just before the
ldisc->ops->dcd_change method call to just after.

Fix attendant build breakage in
    drivers/tty/n_tty.c
    drivers/tty/tty_buffer.c
    drivers/staging/speakup/selection.c
    drivers/staging/dgrp/dgrp_*.c

Cc: William Hubbs <w.d.hubbs@gmail.com>
Cc: Chris Brannon <chris@the-brannons.com>
Cc: Kirk Reiser <kirk@braille.uwo.ca>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: George Spelvin <linux@horizon.com>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-13 10:13:58 -08:00
George Spelvin ce3da1a654 pps: Don't crash the machine when exiting will do
PPS is not really the must-have subsystem that warrants crashing
the machine if the ldisc interface is broken.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: George Spelvin <linux@horizon.com>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-13 09:43:07 -08:00
George Spelvin d953e0e837 pps: Fix a use-after free bug when unregistering a source.
Remove the cdev from the system (with cdev_del) *before* deallocating it
(in pps_device_destruct, called via kobject_put from device_destroy).

Also prevent deallocating a device with open file handles.

A better long-term fix is probably to remove the cdev from the pps_device
entirely, and instead have all devices reference one global cdev.  Then
the deallocation ordering becomes simpler.

But that's more complex and invasive change, so we leave that
for later.

Signed-off-by: George Spelvin <linux@horizon.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-13 09:40:35 -08:00
George Spelvin 03a7ffe4e5 pps: Use pps_lookup_dev to reduce ldisc coupling
Now that N_TTY uses tty->disc_data for its private data,
'subclass' ldiscs cannot use ->disc_data for their own private data.
(This is a regression is v3.8-rc1)

Use pps_lookup_dev to associate the tty with the pps source instead.

This fixes a crashing regression in 3.8-rc1.

Signed-off-by: George Spelvin <linux@horizon.com>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-13 09:40:35 -08:00
George Spelvin 513b032c98 pps: Add pps_lookup_dev() function
The PPS serial line discipline wants to attach a PPS device to a tty
without changing the tty code to add a struct pps_device * pointer.

Since the number of PPS devices in a typical system is generally very low
(n=1 is by far the most common), it's practical to search the entire list
of allocated pps devices.  (We capture the timestamp before the lookup,
so the timing isn't affected.)

It is a bit ugly that this function, which is part of the in-kernel
PPS API, has to be in pps.c as opposed to kapi,c, but that's not
something that affects users.

Signed-off-by: George Spelvin <linux@horizon.com>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-13 09:40:35 -08:00
Joe Millenbach 4f73bc4dd3 tty: Added a CONFIG_TTY option to allow removal of TTY
The option allows you to remove TTY and compile without errors. This
saves space on systems that won't support TTY interfaces anyway.
bloat-o-meter output is below.

The bulk of this patch consists of Kconfig changes adding "depends on
TTY" to various serial devices and similar drivers that require the TTY
layer.  Ideally, these dependencies would occur on a common intermediate
symbol such as SERIO, but most drivers "select SERIO" rather than
"depends on SERIO", and "select" does not respect dependencies.

bloat-o-meter output comparing our previous minimal to new minimal by
removing TTY.  The list is filtered to not show removed entries with awk
'$3 != "-"' as the list was very long.

add/remove: 0/226 grow/shrink: 2/14 up/down: 6/-35356 (-35350)
function                                     old     new   delta
chr_dev_init                                 166     170      +4
allow_signal                                  80      82      +2
static.__warned                              143     142      -1
disallow_signal                               63      62      -1
__set_special_pids                            95      94      -1
unregister_console                           126     121      -5
start_kernel                                 546     541      -5
register_console                             593     588      -5
copy_from_user                                45      40      -5
sys_setsid                                   128     120      -8
sys_vhangup                                   32      19     -13
do_exit                                     1543    1526     -17
bitmap_zero                                   60      40     -20
arch_local_irq_save                          137     117     -20
release_task                                 674     652     -22
static.spin_unlock_irqrestore                308     260     -48

Signed-off-by: Joe Millenbach <jmillenbach@gmail.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-18 16:15:27 -08:00
Greg Kroah-Hartman 0fe763c570 Drivers: misc: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03 15:57:16 -08:00
Ben Hutchings c56283034c pps, ptp: Remove dependencies on EXPERIMENTAL
These are now established subsystems, and we want drivers to be able
to select PPS and PTP_1588_CLOCK without depending on EXPERIMENTAL.
Further, the use of EXPERIMENTAL is now deprecated in general.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01 11:35:17 -04:00
Fengguang Wu 125c4c706b idr: rename MAX_LEVEL to MAX_IDR_LEVEL
To avoid name conflicts:

  drivers/video/riva/fbdev.c:281:9: sparse: preprocessor token MAX_LEVEL redefined

While at it, also make the other names more consistent and add
parentheses.

[akpm@linux-foundation.org: repair fallout]
[sfr@canb.auug.org.au: IB/mlx4: fix for MAX_ID_MASK to MAX_IDR_MASK name change]
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: walter harms <wharms@bfs.de>
Cc: Glauber Costa <glommer@parallels.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:04:56 +09:00
Emil Goode 668f06b9fb pps: return PTR_ERR on error in device_create
We should return PTR_ERR if the call to the device_create function fails.
Without this patch we instead return the value from a successful call to
cdev_add if the call to device_create fails.

Signed-off-by: Emil Goode <emilgoode@gmail.com>
Acked-by: Devendra Naga <devendra.aaru@gmail.com>
Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30 17:25:21 -07:00
Dan Carpenter 7ad12566dc pps: class_create() returns an ERR_PTR, not NULL
class_create() never returns NULLs only ERR_PTRs.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-05 15:49:43 -08:00
Heiko Carstens 79bc57463b pps gpio client: add missing dependency
Add "depends on GENERIC_HARDIRQS" to avoid compile breakage on s390:

drivers/built-in.o: In function `pps_gpio_remove':
linux-next/drivers/pps/clients/pps-gpio.c:189: undefined reference to `free_irq'

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: James Nuss <jamesnuss@nanometrics.ca>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-02 16:07:02 -07:00
James Nuss 161520451d pps: new client driver using GPIO
This client driver allows you to use a GPIO pin as a source for PPS
signals.  Platform data [1] are used to specify the GPIO pin number,
label, assert event edge type, and whether clear events are captured.

This driver is based on the work by Ricardo Martins who submitted an
initial implementation [2] of a PPS IRQ client driver to the linuxpps
mailing-list on Dec 3 2010.

[1] include/linux/pps-gpio.h
[2] http://ml.enneenne.com/pipermail/linuxpps/2010-December/004155.html

[akpm@linux-foundation.org: remove unneeded cast of void*]
Signed-off-by: James Nuss <jamesnuss@nanometrics.ca>
Cc: Ricardo Martins <rasm@fe.up.pt>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Ricardo Martins <rasm@fe.up.pt>
Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: Igor Plyatov <plyatov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-02 16:07:02 -07:00
James Nuss 437c534186 pps: default echo function
A default echo function has been provided so it is no longer an error when
you specify PPS_ECHOASSERT or PPS_ECHOCLEAR without an explicit echo
function.  This allows some code re-use and also makes it easier to write
client drivers since the default echo function does not normally need to
change.

Signed-off-by: James Nuss <jamesnuss@nanometrics.ca>
Reviewed-by: Ben Gardiner <bengardiner@nanometrics.ca>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Cc: Ricardo Martins <rasm@fe.up.pt>
Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: Igor Plyatov <plyatov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-02 16:07:02 -07:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Alexander Gordeev 77d1c8eb8a pps: remove unreachable code
Remove code enabled only when CONFIG_PREEMPT_RT is turned on because it is
not used in the vanilla kernel.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:17 -07:00
matt mooney 26a082dc53 pps: change to new flag variable
Replace EXTRA_CFLAGS with ccflags-y.

Signed-off-by: matt mooney <mfm@muteddisk.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-03-17 14:05:35 +01:00
Thomas Gleixner 95b90afec3 pps: make pps_gen_parport depend on BROKEN
This driver causes hard lockups, when the active clock soure is jiffies.

The reason is that it loops with interrupts disabled waiting for a
timestamp to be reached by polling getnstimeofday().  Though with a
jiffies clocksource, when that code runs on the same CPU which is
responsible for updating jiffies, then we loop in circles for ever
simply because the timer interrupt cannot update jiffies.  So both UP
and SMP can be affected.

There is no easy fix for that problem so make it depend on BROKEN for
now.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: Rodolfo Giometti <giometti@linux.it>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-04 17:53:38 -08:00
Alexander Gordeev 99b0d365e5 pps: initialize ts_real properly
Initialize ts_real.flags to fix compiler warning about possible
uninitialized use of this field.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-25 15:07:37 -08:00
Alexander Gordeev 4f542e3dd9 pps: claim parallel port exclusively
Both pps_parport and pps_gen_parport are written in a way that they
can't share a port with any other driver.  This can result in locking up
the process that loads modules or even the whole kernel if the modules
are compiled in.  Use PARPORT_FLAG_EXCL to indicate this.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-26 10:50:00 +10:00
Rodolfo Giometti a783ac4453 pps ktimer: remove noisy message
Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-26 10:49:59 +10:00
Alexander Gordeev 563558b2c7 pps: add parallel port PPS signal generator
Add PPS signal generator which utilizes STROBE pin of a parallel port to
send PPS signals.  It uses parport abstraction layer and hrtimers to
precisely control the signal.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 08:03:21 -08:00
Alexander Gordeev 46b402a0e5 pps: add parallel port PPS signal generator
Add PPS signal generator which utilizes STROBE pin of a parallel port to
send PPS signals.  It uses parport abstraction layer and hrtimers to
precisely control the signal.

[akpm@linux-foundation.org: fix build]
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 08:03:21 -08:00
Alexander Gordeev a10203c691 pps: add parallel port PPS client
Add parallel port PPS client.  It uses a standard method for capturing
timestamps for assert edge transitions: getting a timestamp soon after an
interrupt has happened.

This is not a very precise source of time information due to interrupt
handling delays.  However, timestamps for clear edge transitions are much
more precise because the interrupt handler continuously polls hardware
port until the transition is done.

Hardware port operations require only about 1us so the maximum error
should not exceed this value.  This was my primary goal when developing
this client.

Clear edge capture could be disabled using clear_wait parameter.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 08:03:21 -08:00
Alexander Gordeev 717c033669 pps: add kernel consumer support
Add an optional feature of PPSAPI, kernel consumer support, which uses the
added hardpps() function.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 08:03:21 -08:00
Alexander Gordeev 025b40abe7 ntp: add hardpps implementation
This commit adds hardpps() implementation based upon the original one from
the NTPv4 reference kernel code from David Mills.  However, it is highly
optimized towards very fast syncronization and maximum stickness to PPS
signal.  The typical error is less then a microsecond.

To make it sync faster I had to throw away exponential phase filter so
that the full phase offset is corrected immediately.  Then I also had to
throw away median phase filter because it gives a bigger error itself if
used without exponential filter.

Maybe we will find an appropriate filtering scheme in the future but it's
not necessary if the signal quality is ok.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: John Stultz <johnstul@us.ibm.com>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 08:03:20 -08:00
Alexander Gordeev 12f9b1f9c1 pps: timestamp is always passed to dcd_change()
Remove the code that gatheres timestamp in pps_tty_dcd_change() in case
passed ts parameter is NULL because it never happens in the current code.
Fix comments as well.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 08:03:20 -08:00
Alexander Gordeev 818b9eefe7 pps: simplify conditions a bit
Bitwise conjunction is distributive so we can simplify some conditions.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 08:03:20 -08:00
Alexander Gordeev 29f347c9fa pps: use BUG_ON for kernel API safety checks
This way less overhead is involved when running production kernel.  If you
want to debug a pps client module please define DEBUG to enable the
checks.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 08:03:20 -08:00
Alexander Gordeev 2a5cd6e2fb pps: make idr lock a mutex and protect idr_pre_get
Now pps_idr_lock is never used in interrupt context so we can replace
spin_lock_irq/spin_unlock_irq with plain spin_lock/spin_unlock. But
there is also a potential race condition when someone can steal an id
which was allocated by idr_pre_get before it is used. So convert spin
lock to mutex and protect the whole id generation process.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 08:03:20 -08:00