Commit Graph

2506 Commits

Author SHA1 Message Date
Rafael J. Wysocki bb47e96417 Merge branches 'pm-sleep' and 'powercap'
* pm-sleep:
  PM / hibernate: Declare variables as static
  RTC: rtc-cmos: Fix wakeup from suspend-to-idle
  PM / wakeup: Fix up wakeup_source_report_event()

* powercap:
  PowerCap: Fix an error code in powercap_register_zone()
2017-05-22 20:32:05 +02:00
Rafael J. Wysocki 967b08c25a RTC: rtc-cmos: Fix wakeup from suspend-to-idle
Commit eed4d47efe (ACPI / sleep: Ignore spurious SCI wakeups from
suspend-to-idle) modified the core suspend-to-idle code to filter
out spurious SCI interrupts received while suspended, which requires
ACPI event source handlers to report wakeup events in a way that
will trigger a wakeup from suspend to idle (or abort system suspends
in progress, which is equivalent).

That needs to be done in the rtc-cmos driver too, which was overlooked
by the above commit, so do that now.

Fixes: eed4d47efe (ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle)
Reported-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-05-14 02:23:12 +02:00
Linus Torvalds 556d994a75 RTC for 4.12
Subsystem:
  - Add OF device ID table for i2c drivers
 
 New driver:
  - Motorola CPCAP PMIC RTC
 
 Drivers:
  - cmos: fix IRQ selection
  - ds1307: Add ST m41t0 support
  - ds1374: fix watchdog configuration
  - sh: Add rza series support
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEXx9Viay1+e7J/aM4AyWl4gNJNJIFAlkTf2sACgkQAyWl4gNJ
 NJLPvw//dGzo6oD3C96QIurfrgFx9512ZurEiJpGPIO15obTVLF0SNuswaMj7knm
 ezqQ23qX9VBEmu3si7LvkQVbE60giB3XnlJ/wpFi/LhtlM7SQ4o2Z8Go3rkL8tCw
 iPcj5l3ShbHgSF+TBK+jK5C/8ahR7RE32l2rtSi9xwzxOmKRySmSWg2iGmGJMNUU
 7UHR4DRHVPS/h1ffM/rOWV+d3GVK9laNmeoIORhsWCa+iYwGRZr3XL3GXQzhehBO
 H5uFYewMVBHREADiqMNQ/ogHZI+ghXt1OSK7vhUFkYxosqU56P0YtU6SPH6UuFsH
 ryoiUmCgQQjjhptlvVv71D7Wj1txSCT6rByQU1YyVZ0yw9XpVuGTYBjFBY+D7nxb
 e3sR+Poe3diVLWDwFTXStrY0TtVlCTTCjs5T2kwUdYOJ188expQGHgj6wVl7PPTs
 gpeSIunekbop13KCPWV01TzmRLB8ne9ZiomsuiNnuAKhXP7KRf6AfuQd6kpyvpmH
 vhGcEIe7O0i4TwUIuB/dmdhLHmlOqCpLJpGQihNc+f0jJAxHv+akXEQ06H84FkJD
 kPkBYSVDp/2pEBdf7ig2mlpPEqANgoQY8GCu9SbEg976g0v8k6m+i9IlbR0m7hwE
 0XF+8W45iNsaEIzoXcyHuB/lrUy1/0eNoG4KX8vyWIjITo5HQWg=
 =40TA
 -----END PGP SIGNATURE-----

Merge tag 'rtc-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "RTC subsystem update:
   - Add OF device ID table for i2c drivers

  New RTC driver:
   - Motorola CPCAP PMIC RTC

  RTC driver updates:
   - cmos: fix IRQ selection
   - ds1307: Add ST m41t0 support
   - ds1374: fix watchdog configuration
   - sh: Add rza series support"

* tag 'rtc-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits)
  rtc: gemini: add return value validation
  rtc: snvs: fix an incorrect check of return value
  rtc: ds1374: wdt: Fix stop/start ioctl always returning -EINVAL
  rtc: ds1374: wdt: Fix issue with timeout scaling from secs to wdt ticks
  rtc: sh: mark PM functions as unused
  rtc: hid-sensor-time: remove some dead code
  rtc: m41t80: Add proper compatible for rv4162
  rtc: ds1307: Add m41t0 to OF device ID table
  rtc: ds1307: support m41t0 variant
  rtc: cpcap: fix improper use of IRQ_NONE for request_threaded_irq
  rtc: cmos: Do not assume irq 8 for rtc when there are no legacy irqs
  x86: i8259: export legacy_pic symbol
  dt-bindings: rtc: document the rtc-sh bindings
  rtc: sh: add support for rza series
  rtc: cpcap: kfreeing devm allocated memory
  rtc: wm8350: Remove unused to_wm8350_from_rtc_dev
  rtc: cpcap: new rtc driver
  dt-bindings: Add vendor prefix for Motorola
  rtc: omap: mark PM methods as __maybe_unused
  rtc: omap: remove incorrect __exit markups
  ...
2017-05-10 19:37:14 -07:00
Pan Bian 332e0d13d3 rtc: gemini: add return value validation
Function devm_ioremap() will return a NULL pointer if it fails to remap
IO address, and its return value should be validated before it is used.
However, in function gemini_rtc_probe(), its return value is not
checked. This may result in bad memory access bugs on future access,
e.g. calling the function gemini_rtc_read_time().

Signed-off-by: Pan Bian <bianpan2016@163.com>
Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-05 00:43:52 +02:00
Pan Bian 758929005f rtc: snvs: fix an incorrect check of return value
Function devm_regmap_init_mmio() returns an ERR_PTR on error. However,
in function snvs_rtc_probe() its return value is checked against NULL.
This patch fixes it by checking the return value with IS_ERR().

Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-05 00:43:50 +02:00
Moritz Fischer 538c08f4c8 rtc: ds1374: wdt: Fix stop/start ioctl always returning -EINVAL
The WDIOC_SETOPTIONS case in the watchdog ioctl would alwayss falls
through to the -EINVAL case. This is wrong since thew watchdog does
actually get stopped or started correctly.

Fixes: 920f91e50c ("drivers/rtc/rtc-ds1374.c: add watchdog support")
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-04 14:46:25 +02:00
Moritz Fischer 453d0744f6 rtc: ds1374: wdt: Fix issue with timeout scaling from secs to wdt ticks
The issue is that the internal counter that triggers the watchdog reset
is actually running at 4096 Hz instead of 1Hz, therefore the value
given by userland (in sec) needs to be multiplied by 4096 to get the
correct behavior.

Fixes: 920f91e50c ("drivers/rtc/rtc-ds1374.c: add watchdog support")
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-04 14:45:25 +02:00
Arnd Bergmann 5d05e81516 rtc: sh: mark PM functions as unused
The sh_rtc_set_irq_wake() function is only called from the suspend/resume handlers
that may be hidden, causing a harmless warning:

drivers/rtc/rtc-sh.c:724:13: error: 'sh_rtc_set_irq_wake' defined but not used [-Werror=unused-function]
 static void sh_rtc_set_irq_wake(struct device *dev, int enabled)

The most reliable way to avoid the warning is to remove the existing #ifdef
and mark the two functions as __maybe_unused so the compiler can silently
drop all three when there is no reference.

Fixes: dab5aec64b ("rtc: sh: add support for rza series")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-04-22 18:01:15 +02:00
Dan Carpenter e73ef755fb rtc: hid-sensor-time: remove some dead code
devm_rtc_device_register() doesn't ever return NULL so there is no need
to check.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-04-22 17:56:18 +02:00
Alexandre Belloni a897bf138c rtc: m41t80: Add proper compatible for rv4162
The correct compatible for the rv4162 (microcrystal,rv4162) was not used
upstream and so was not added by eb235c561d.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-04-19 22:05:48 +02:00
Alexandre Belloni db2f814194 rtc: ds1307: Add m41t0 to OF device ID table
m41t0 was added to the I2C device ID table but not the OF table. Fix that.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-04-14 12:08:53 +02:00
Stefan Agner 8566f70c8a rtc: ds1307: support m41t0 variant
The m41t0 variant is very similar to the already supported m41t00
variant, with the notable exception of the oscillator fail bit.
The data sheet notes:

  If the oscillator fail (OF) bit is internally set to a '1,' this
  indicates that the oscillator has either stopped, or was stopped
  for some period of time and can be used to judge the validity of
  the clock and date data.

The bit will get cleared with a regular write of the system time,
so no changes are needed to clear it.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-04-14 12:08:53 +02:00
Tony Lindgren 03a32da5ca rtc: cpcap: fix improper use of IRQ_NONE for request_threaded_irq
There's a funny typo where IRQ_NONE is used instead of IRQF_TRIGGER_NONE
for request_threaded_irq(). Let's fix it before it gets copied elsewhere.

Fixes: dd3bf50b35 ("rtc: cpcap: new rtc driver")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-04-14 12:08:52 +02:00
Hans de Goede a1e23a42f1 rtc: cmos: Do not assume irq 8 for rtc when there are no legacy irqs
On some systems (e.g. Intel Bay Trail systems) the legacy PIC is not
used, in this case virq 8 will be a random irq, rather then hw_irq 8
from the PIC.

Requesting virq 8 in this case will not help us to get alarm irqs and
may cause problems for other drivers which actually do need virq 8,
for example on an Asus Transformer T100TA this leads to:

[ 28.745155] genirq: Flags mismatch irq 8. 00000088 (mmc0) vs. 00000080 (rtc0)
<snip oops>
[ 28.753700] mmc0: Failed to request IRQ 8: -16
[ 28.975934] sdhci-acpi: probe of 80860F14:01 failed with error -16

This commit fixes this by making the rtc-cmos driver continue
without using an irq rather then claiming irq 8 when no irq is
specified in the pnp-info and there are no legacy-irqs.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-04-14 12:08:51 +02:00
Chris Brandt dab5aec64b rtc: sh: add support for rza series
This same RTC is used in RZ/A series MPUs, therefore with some slight
changes, this driver can be reused. Additionally, since ARM architectures
require Device Tree configurations, device tree support has been added.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-04-03 18:01:34 +02:00
Logan Gunthorpe d5ed9177f6 rtc: utilize new cdev_device_add helper function
Mostly straightforward, but we had to remove the rtc_dev_add/del_device
functions as they split up the cdev_add and the device_add.

Doing this also revealed that there was likely another subtle bug:
seeing cdev_add was done after device_register, the cdev probably
was not ready before device_add when the uevent occurs. This would
race with userspace, if it tried to use the device directly after
the uevent. This is fixed just by using the new helper function.

Another weird thing is this driver would, in some error cases, call
cdev_add() without calling cdev_init. This patchset corrects this
by avoiding calling cdev_add if the devt is not set.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-21 06:44:33 +01:00
Dan Carpenter 65e9e65ceb rtc: cpcap: kfreeing devm allocated memory
We shouldn't kfree(rtc) because is devm_ managed memory.  It leads to a
double free.

Fixes: dd3bf50b35 ("rtc: cpcap: new rtc driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-16 23:00:07 +01:00
Nobuhiro Iwamatsu 7a8128e2e2 rtc: wm8350: Remove unused to_wm8350_from_rtc_dev
The to_wm8350_from_rtc_dev macro is not used by anything in the
rtc-wm8350 driver.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-16 22:59:54 +01:00
Sebastian Reichel dd3bf50b35 rtc: cpcap: new rtc driver
This driver supports the Motorola CPCAP PMIC found on
some of Motorola's mobile phones, such as the Droid 4.

Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-09 01:32:35 +01:00
Dmitry Torokhov 0c749eacaa rtc: omap: mark PM methods as __maybe_unused
Instead of using #ifdef guards around PM methods, let's annotate
them as __maybe_unused, as it provides better compile coverage.

Also drop empty stub for omap_rtc_runtime_resume().

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-09 01:32:32 +01:00
Dmitry Torokhov b9de1a1dae rtc: omap: remove incorrect __exit markups
Even if bus is not hot-pluggable, devices can be unbound from the
driver via sysfs, so we should not be using __exit annotations on
remove() methods. The only exception is drivers registered with
platform_driver_probe(), which specifically disables sysfs bind/unbind
attributes.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-09 01:32:31 +01:00
Javier Martinez Canillas ff764b88e6 rtc: rs5c372: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-09 01:29:34 +01:00
Javier Martinez Canillas eb235c561d rtc: m41t80: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-09 01:29:32 +01:00
Javier Martinez Canillas ffbecfbdbe rtc: rx8581: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-09 01:29:31 +01:00
Javier Martinez Canillas 21f2743270 rtc: s35390a: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-09 01:29:29 +01:00
Javier Martinez Canillas 0383550402 rtc: isl1208: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-09 01:29:27 +01:00
Javier Martinez Canillas abac12e110 rtc: ds1374: Set .of_match_table to OF device ID table
The driver has a OF device ID table but the struct i2c_driver
.of_match_table field is not set.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-09 01:29:26 +01:00
Javier Martinez Canillas 23194ac099 rtc: rtc-ds1672: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-09 01:29:24 +01:00
Javier Martinez Canillas 4dfbd1378d rtc: ds3232: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-09 01:29:23 +01:00
Javier Martinez Canillas 81b779ce5f rtc: rx8010: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-09 01:29:21 +01:00
Javier Martinez Canillas 7ef6d2c266 rtc: ds1307: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-09 01:29:20 +01:00
Javier Martinez Canillas 36138c70e6 rtc: bq32k: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-09 01:29:17 +01:00
Javier Martinez Canillas e696a1dd7e rtc: rv3029: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-09 01:29:16 +01:00
Javier Martinez Canillas 740ad8f43c rtc: rv8803: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-09 01:29:14 +01:00
Ingo Molnar 174cd4b1e5 sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>
Fix up affected files that include this signal functionality via sched.h.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:32 +01:00
Linus Torvalds 5782fd14aa RTC for 4.11
Subsystem:
  - constify rtc_class_ops structures
 
 New driver:
  - STM32
 
 Drivers:
  - armada38x: fix errata, Armada 7K/8K support
  - ds3232: fix wakeup support
  - gemini: DT support
  - m48t86: huge cleanup and platform_data removal
  - mcp795: alarm support
  - sun6i: proper oscillator handling
  - tegra: proper clock handling
  - tps65910: calibration support
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEl0I5XWmUIrwBfFMm2KKDO9oT4sIFAlizZLQACgkQ2KKDO9oT
 4sISIw//Zl96KIXqeC+En+8v8Sa0pham/mcLbKYujnFIi1mMaesEXJJClALXYAGQ
 r/fwXkYowC14AMXGuV5vMMVAVisJpj1gtMmpom+9/7mYtkFOIUsB8Sis8dMqgTqx
 JFBho7JvPJcwE7BLzUNRzX4tWhFhNm0epyMrsrQrBSeLx3PD8xg5v2kPYuZHdYU0
 63Bovkq6zvH9/WdO8DLXw/nc/Y0Bo66rlvJkcaNfjBrdFTRvRAM5JIiJuxewR+jY
 3bTQ8PQjnHAWIj/RhrwguGTLDlgJKcpitB06Y53TdRaNtVfJuEN8z6EjNkR37kyS
 ZJnPgihCoH6l7v28uY4e5BAg/Fe3ZhDrPmhZWq8rEkByeQpSUWgrE/DtcoC0OkZO
 l2fU/y2vq4za7CpRPp5bvq3sF0PbRHSF0o8rvmHlQZI/mwwYbwF9gk1vg5adyH7i
 1UuTGoDXxcMYZPJm3zezE1bUa4OAyjH1NhrvPvinlDw+aekaai2eFUKIbJim+dJx
 tEVPATPlDk/Ngwth1hpE8D/tOdoQhWtfNk7+zo7MNtMjAO1h/DxSLHXJ9mvCwcPh
 lPT9BmQxT1HECIa5gjN1R+5X5or5z8LPcNGO9TedIchfZ8qBGzsWOt9bXlw2dgI2
 qmXo6IrjCN88kf+qsVA4FKLmaqgpb9+Yb+5cPlhEOKvxUhY47Nc=
 =Go5q
 -----END PGP SIGNATURE-----

Merge tag 'rtc-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "Subsystem:
   - constify rtc_class_ops structures

 New driver:
   - STM32

 Drivers:
   - armada38x: fix errata, Armada 7K/8K support
   - ds3232: fix wakeup support
   - gemini: DT support
   - m48t86: huge cleanup and platform_data removal
   - mcp795: alarm support
   - sun6i: proper oscillator handling
   - tegra: proper clock handling
   - tps65910: calibration support"

* tag 'rtc-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (44 commits)
  rtc: ds3232: Call device_init_wakeup before device_register
  rtc: pcf2127: bulk read only date and time registers.
  rtc: armada38x: Add support for Armada 7K/8K
  rtc: armada38x: Prepare driver to manage different versions
  rtc: ds3232: Add regmap max_register definition.
  rtc: ds3232: Cleanup whitespace around register and bit definitions.
  rtc: m48t86: remove unused platform_data
  ARM: Orion5x: ts78xx: allow rtc-m48t86 to manage it's own resources
  ARM: Orion5x: ts78xx: remove RTC detection
  ARM: ep93xx: ts72xx: allow rtc-m48t86 to manage its own resources
  rtc: m48t86: verify that the RTC is actually present
  rtc: m48t86: add NVRAM support
  rtc: m48t86: allow driver to manage its resources
  rtc: m48t86: shorten register name defines
  bindings: rtc: correct wrong reference in required properties
  rtc: sun6i: Fix return value check in sun6i_rtc_clk_init()
  rtc: sun6i: extend test coverage
  rtc: sun6i: Fix compatibility with old DT binding
  rtc: snvs: add a missing write sync
  rtc: bq32000: add support to enable disable the trickle charge FET bypass
  ...
2017-02-27 19:59:21 -08:00
Phil Reid d4f6c6f15a rtc: ds3232: Call device_init_wakeup before device_register
The wakealarm attribute is currently not exposed in the sysfs interface
as the device has not been set as doing wakealarm when device_register
is called. Changing the order of the calls fixes that problem. Interrupts
are cleared in check_rtc_status prior to requesting the interrupt.

This is only set if an irq is defined. If irq registration fails then
set wakeup_capable to false. With this change the sysfs wakealarm
attribute will be left visible but it is non functional. rtcwake
still returns that the device is not enabled for wakeup.

Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-02-24 11:14:53 +01:00
Sean Nyekjaer 3769a375ab rtc: pcf2127: bulk read only date and time registers.
Read control registers one by one and bulk read time registers.
This fixes when the clock is read, the watchdog counter register is zeroed.

Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-02-23 18:38:54 +01:00
Linus Torvalds 5ab356626f Pin control bulk changes for the v4.11 kernel cycle:
Core changes:
 
 - Switch the generic pin config argument from 16 to 24 bits,
   only use 8 bits for the configuration type. We might need to
   encode more information about a certain setting than we need
   to encode different generic settings.
 
 - Add a cross-talk API to the pin control GPIO back-end,
   utilizing pinctrl_gpio_set_config() from GPIO drivers that
   want to set up a certain pin configuration in the back-end.
   This also includes the .set_config() refactoring of the
   GPIO chips, so that they pass a generic configuration for
   things like debouncing and single ended (typically open
   drain). This change has also been merged in an immutable
   branch to the GPIO tree.
 
 - Take hogs with a delayed work, so that we finalize probing
   a pin controller before trying to get any hogs.
 
 - For pin controllers putting all group and function definitions
   into the device tree, we now have generic code to deal with
   this and it is used in two drivers so far.
 
 - Simplifications of the pin request conflict check.
 
 - Make dt_free_map() optional.
 
 Updates to drivers:
 
 - pinctrl-single now use the generic helpers to generate dynamic
   group and function tables from the device tree.
 
 - Texas Instruments IOdelay configuration driver add-on to
   pinctrl-single.
 
 - i.MX: use radix trees to store groups and functions, use the new
   generic group and function helpers to manage them.
 
 - Intel: add support for hardware debouncing and 1K pull-down.
   New subdriver for the Gemini Lake SoC.
 
 - Renesas SH-PFC: drive strength and bias support, CAN bus muxing,
   MSIOF, SDHI, HSCIF for r8a7796. Gyro-ADC supporton r8a7791.
 
 - Aspeed: use syscon cross-dependencies to set up related bits in
   the LPC host controller and display controller.
 
 - Aspeed: finalize G4 and G5 support. Fix mux configuration on
   GPIOs. Add banks Y, Z, AA, AB and AC.
 
 - AMD: support additional GPIO.
 
 - STM32: set this controller to strict muxing mode.
   STM32H743 MCU support.
 
 - Allwinner sunxi: deep simplifications on how to support
   subvariants of SoCs without adding to much SoC-specific data
   for each subvariant, especially for sun5i variants. New driver
   for V3s SoCs. New driver for the H5 SoC. Support A31/A31s
   variants with the new variant framework.
 
 - Mvebu: simplifications to use a MMIO and regmap abstraction.
   New subdrivers for the 98DX3236, 98DX5241 SoCs.
 
 - Samsung Exynos: delete Exynos4415 support. Add crosstalk to the
   SoC driver to access regmaps. Add infrastructure for pin-bank
   retention control. Clean out the pin retention control from
   arch/arm/mach-exynos and arch/arm/mach-s5p and put it properly
   in the Samsung pin control driver(s).
 
 - Meson: add HDMI HPD/DDC pins. Add pwm_ao_b pin.
 
 - Qualcomm: use raw spinlock variants: this makes the qualcomm
   driver realtime-safe.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYq/7kAAoJEEEQszewGV1zf4oQALVaN5tuaCbzN4QOq87jzXmk
 K195kKG0nkNvN6o5llNhBszHfCSmX1+oSscxuCF/88kH4mFHeDIbvg0KOk5IZYxA
 YlT8NA75C9+flARE3gQUyL320ulahWbvOthntQprzsVU4RJa0zP38peQsfiUd8W1
 ch8GInJYYkczcsAbmziyUOBu5a2o9tX3u8BF8FaBf2uyrCiBC/ZT2VpzvbOR5NeU
 MvjFvc7bq2fNltzDNHdZZUo/5iCbnPlRNig2umDp5fFa8rZcdPmGMAOl4p6nizHY
 S16xDl38xxDQx8sp1IH4n+th3G2cXoONEj9eZ6woWTJhLbLc13CacYPfleYfqEOe
 +JyrUgBgFBINiFWDHHaebWJeD2M/QF4FnSDGnnJBy/bKWe6lJnknGvSZNcIEvdvB
 QeeKyfrvnKiCyjNY4N+ZNdMLA2vj5o86vG2hSqztPiwYWDePbN76yeZ7l79bFfOo
 ZnCa2ay70Np7xwrQWors4Gl2LV2zJG7AkaNA7vvS9NX6OURu/SkNVePkY1XHCLwu
 lNvYd4iwFJxzXm08TsgtLC080eZfvCot9xqbgzvoapnwx7tBuaAakXI4bh0T3x4n
 pEauKO3oNE/K89mN9QK2jfsD9kDWvm4xvc+ilA6DGU0C37XnDQjF+Q5xy16262Gh
 9w0yWMlqzrr7stUXAjS4
 =IMY0
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "Pin control bulk changes for the v4.11 kernel cycle.

  Core changes:

   - Switch the generic pin config argument from 16 to 24 bits, only use
     8 bits for the configuration type. We might need to encode more
     information about a certain setting than we need to encode
     different generic settings.

   - Add a cross-talk API to the pin control GPIO back-end, utilizing
     pinctrl_gpio_set_config() from GPIO drivers that want to set up a
     certain pin configuration in the back-end.

     This also includes the .set_config() refactoring of the GPIO chips,
     so that they pass a generic configuration for things like
     debouncing and single ended (typically open drain). This change has
     also been merged in an immutable branch to the GPIO tree.

   - Take hogs with a delayed work, so that we finalize probing a pin
     controller before trying to get any hogs.

   - For pin controllers putting all group and function definitions into
     the device tree, we now have generic code to deal with this and it
     is used in two drivers so far.

   - Simplifications of the pin request conflict check.

   - Make dt_free_map() optional.

  Updates to drivers:

   - pinctrl-single now use the generic helpers to generate dynamic
     group and function tables from the device tree.

   - Texas Instruments IOdelay configuration driver add-on to
     pinctrl-single.

   - i.MX: use radix trees to store groups and functions, use the new
     generic group and function helpers to manage them.

   - Intel: add support for hardware debouncing and 1K pull-down. New
     subdriver for the Gemini Lake SoC.

   - Renesas SH-PFC: drive strength and bias support, CAN bus muxing,
     MSIOF, SDHI, HSCIF for r8a7796. Gyro-ADC supporton r8a7791.

   - Aspeed: use syscon cross-dependencies to set up related bits in the
     LPC host controller and display controller.

   - Aspeed: finalize G4 and G5 support. Fix mux configuration on GPIOs.
     Add banks Y, Z, AA, AB and AC.

   - AMD: support additional GPIO.

   - STM32: set this controller to strict muxing mode. STM32H743 MCU
     support.

   - Allwinner sunxi: deep simplifications on how to support subvariants
     of SoCs without adding to much SoC-specific data for each
     subvariant, especially for sun5i variants. New driver for V3s SoCs.
     New driver for the H5 SoC. Support A31/A31s variants with the new
     variant framework.

   - Mvebu: simplifications to use a MMIO and regmap abstraction. New
     subdrivers for the 98DX3236, 98DX5241 SoCs.

   - Samsung Exynos: delete Exynos4415 support. Add crosstalk to the SoC
     driver to access regmaps. Add infrastructure for pin-bank retention
     control. Clean out the pin retention control from
     arch/arm/mach-exynos and arch/arm/mach-s5p and put it properly in
     the Samsung pin control driver(s).

   - Meson: add HDMI HPD/DDC pins. Add pwm_ao_b pin.

   - Qualcomm: use raw spinlock variants: this makes the qualcomm driver
     realtime-safe"

* tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (111 commits)
  pinctrl: samsung: Fix return value check in samsung_pinctrl_get_soc_data()
  pinctrl: intel: unlock on error in intel_config_set_pull()
  pinctrl: berlin: make bool drivers explicitly non-modular
  pinctrl: spear: make bool drivers explicitly non-modular
  pinctrl: mvebu: make bool drivers explicitly non-modular
  pinctrl: sunxi: make sun5i explicitly non-modular
  pinctrl: sunxi: Remove stray printk call in sun5i driver's probe function
  pinctrl: samsung: mark PM functions as __maybe_unused
  pinctrl: sunxi: Remove redundant A31s pinctrl driver
  pinctrl: sunxi: Support A31/A31s with pinctrl variants
  pinctrl: Amend bindings for STM32 pinctrl
  pinctrl: Add STM32 pinctrl driver DT bindings
  pinctrl: stm32: Add STM32H743 MCU support
  include: dt-bindings: Add STM32H7 pinctrl DT defines
  gpio: aspeed: Remove dependence on GPIOF_* macros
  pinctrl: stm32: fix bad location of gpiochip_lock_as_irq
  drivers: pinctrl: add driver for Allwinner H5 SoC
  pinctrl: intel: Add Intel Gemini Lake pin controller support
  pinctrl: intel: Add support for 1k additional pull-down
  pinctrl: intel: Add support for hardware debouncer
  ...
2017-02-21 16:34:22 -08:00
Gregory CLEMENT 34f54f579a rtc: armada38x: Add support for Armada 7K/8K
The Armada 7K/8K use the same RTC IP than the Armada 38x. However the SOC
integration differs in 2 points:
 - MBUS bridge timing initialization
 - IRQ configuration at SoC level

Moreover the Armada 7K/8K have an issue preventing to get the interrupt
from alarm 1. This commit allows to use alarm 2 for these A7K/8K but to
still use alarm 1 for the Armada 38x.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-02-21 23:21:30 +01:00
Gregory CLEMENT 75faea9179 rtc: armada38x: Prepare driver to manage different versions
In order to prepare the introduction of the A7K/A8K version of the RTC,
this commit introduces a new data structure. This structure allows to
handle the differences between the integration of the RTC IP in the
SoCs. It will be:
 - MBUS bridge timing initialization
 - IRQ configuration at SoC level

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-02-21 23:21:28 +01:00
Phil Reid 082edf0ab1 rtc: ds3232: Add regmap max_register definition.
Add the max_register  to the regmap_config definition. This allows
dumping of the device's registers via the regmap debugfs interface.

Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-02-21 21:34:00 +01:00
Phil Reid ca4b0a6de8 rtc: ds3232: Cleanup whitespace around register and bit definitions.
Whitespace was a combination of spaces and tabs.
Use spaces and align register / bit definitions.

Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-02-21 21:33:58 +01:00
H Hartley Sweeten 0500ce589a rtc: m48t86: remove unused platform_data
All users of this driver have been updated to allow the driver to
manage it's own resources and do the read/write operations internally.
The m48t86_ops are no longer used.

Remove the platform_data header and the support code in the driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-02-21 21:23:13 +01:00
H Hartley Sweeten 3ea07127d9 rtc: m48t86: verify that the RTC is actually present
The RTC is an optional feature at purchase time on some Technologic
Systems boards. Verify that it actually exists by checking if the
last two bytes of the NVRAM can be changed.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-02-21 18:16:31 +01:00
H Hartley Sweeten b180cf8b0b rtc: m48t86: add NVRAM support
This RTC has 114 bytes of NVRAM. Provide access to it via a binary
sysfs 'nvram' attribute file.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-02-12 01:08:01 +01:00
H Hartley Sweeten 8057c86d43 rtc: m48t86: allow driver to manage its resources
Allow this driver to, optionally, manage it's own resources and do the
read/write operations if the platform does not provide them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-02-12 01:07:38 +01:00
H Hartley Sweeten 68b54f477f rtc: m48t86: shorten register name defines
For aesthetics. Shorten all the register names by removing '_REG' from all
of them.
This helps fix all the checkpatch.pl issues.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-02-12 01:06:35 +01:00
Wei Yongjun aaa65a9ce6 rtc: sun6i: Fix return value check in sun6i_rtc_clk_init()
In case of error, the function of_io_request_and_map() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should
be replaced with IS_ERR().

Fixes: 847b8bf62eb4 ("rtc: sun6i: Expose the 32kHz oscillator")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-02-12 00:34:31 +01:00
Alexandre Belloni 93946c49cd rtc: sun6i: extend test coverage
COMPILE_TEST was wrongly placed, move it to the "depends on" line.
Also depend on COMMON_CLK as the driver now needs it to be properly
compiled.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-02-01 13:55:07 +01:00