Commit Graph

55 Commits

Author SHA1 Message Date
Ryusuke Konishi 39a9dcca61 nilfs2: emit error message when I/O error is detected
When nilfs returned -EIO as an error code, it's not always clear if it
came from the underlying block device or not.  This will mend the issue
by having low level I/O routines of nilfs output an error message when
they detected an I/O error.

Link: http://lkml.kernel.org/r/1464875891-5443-7-git-send-email-konishi.ryusuke@lab.ntt.co.jp
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02 19:35:19 -04:00
Ryusuke Konishi feee880fa5 nilfs2: reduce bare use of printk() with nilfs_msg()
Replace most use of printk() in nilfs2 implementation with nilfs_msg(),
and reduce the following checkpatch.pl warning:

  "WARNING: Prefer [subsystem eg: netdev]_crit([subsystem]dev, ...
   then dev_crit(dev, ... then pr_crit(...  to printk(KERN_CRIT ..."

This patch also fixes a minor checkpatch warning "WARNING: quoted string
split across lines" that often accompanies the prior warning, and amends
message format as needed.

Link: http://lkml.kernel.org/r/1464875891-5443-5-git-send-email-konishi.ryusuke@lab.ntt.co.jp
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02 19:35:17 -04:00
Mike Christie 2a222ca992 fs: have submit_bh users pass in op and flags separately
This has submit_bh users pass in the operation and flags separately,
so submit_bh_wbc can setup the bio op and bi_rw flags on the bio that
is submitted.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07 13:41:38 -06:00
Ryusuke Konishi 7f00184e9c nilfs2: remove unnecessary else after return or break
This fixes the checkpatch.pl warning that suggests else is not
generally useful after a break or return.

Link: http://lkml.kernel.org/r/1462886671-3521-6-git-send-email-konishi.ryusuke@lab.ntt.co.jp
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-23 17:04:14 -07:00
Ryusuke Konishi 0c6c44cb9f nilfs2: avoid bare use of 'unsigned'
This fixes checkpatch.pl warning "WARNING: Prefer 'unsigned int' to
bare use of 'unsigned'".

Link: http://lkml.kernel.org/r/1462886671-3521-5-git-send-email-konishi.ryusuke@lab.ntt.co.jp
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-23 17:04:14 -07:00
Ryusuke Konishi 4b420ab4ee nilfs2: clean up old e-mail addresses
E-mail addresses of osrg.net domain are no longer available.  This
removes them from authorship notices and prevents reporters from being
confused.

Link: http://lkml.kernel.org/r/1461935747-10380-5-git-send-email-konishi.ryusuke@lab.ntt.co.jp
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-23 17:04:14 -07:00
Ryusuke Konishi 5726d0b454 nilfs2: remove FSF mailing address from GPL notices
This removes the extra paragraph which mentions FSF address in GPL
notices from source code of nilfs2 and avoids the checkpatch.pl error
related to it.

Link: http://lkml.kernel.org/r/1461935747-10380-4-git-send-email-konishi.ryusuke@lab.ntt.co.jp
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-23 17:04:14 -07:00
Ryusuke Konishi 4f05028f8d nilfs2: fix gcc uninitialized-variable warnings in powerpc build
Some false positive warnings are reported for powerpc build.

The following warnings are reported in
 http://kisskb.ellerman.id.au/kisskb/buildresult/12519703/

   CC      fs/nilfs2/super.o
 fs/nilfs2/super.c: In function 'nilfs_resize_fs':
 fs/nilfs2/super.c:376:2: warning: 'blocknr' may be used uninitialized in this function [-Wuninitialized]
 fs/nilfs2/super.c:362:11: note: 'blocknr' was declared here
   CC      fs/nilfs2/recovery.o
 fs/nilfs2/recovery.c: In function 'nilfs_salvage_orphan_logs':
 fs/nilfs2/recovery.c:631:21: warning: 'sum' may be used uninitialized in this function [-Wuninitialized]
 fs/nilfs2/recovery.c:585:32: note: 'sum' was declared here
 fs/nilfs2/recovery.c: In function 'nilfs_search_super_root':
 fs/nilfs2/recovery.c:873:11: warning: 'sum' may be used uninitialized in this function [-Wuninitialized]

Another similar warning is reported in
 http://kisskb.ellerman.id.au/kisskb/buildresult/12520079/

   CC      fs/nilfs2/btree.o
 fs/nilfs2/btree.c: In function 'nilfs_btree_convert_and_insert':
 include/asm-generic/bitops/non-atomic.h:105:20: warning: 'bh' may be used uninitialized in this function [-Wuninitialized]
 fs/nilfs2/btree.c:1859:22: note: 'bh' was declared here

This cleans out these warnings by forcing the variables to be initialized.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Ryusuke Konishi 09ef29e0f6 nilfs2: fix gcc unused-but-set-variable warnings
Fix the following build warnings:

 $ make W=1
 [...]
   CC [M]  fs/nilfs2/btree.o
 fs/nilfs2/btree.c: In function 'nilfs_btree_split':
 fs/nilfs2/btree.c:923:8: warning: variable 'newptr' set but not used [-Wunused-but-set-variable]
   __u64 newptr;
         ^
 fs/nilfs2/btree.c:922:8: warning: variable 'newkey' set but not used [-Wunused-but-set-variable]
   __u64 newkey;
         ^
   CC [M]  fs/nilfs2/dat.o
 fs/nilfs2/dat.c: In function 'nilfs_dat_prepare_end':
 fs/nilfs2/dat.c:158:8: warning: variable 'start' set but not used [-Wunused-but-set-variable]
   __u64 start;
         ^
   CC [M]  fs/nilfs2/segment.o
 fs/nilfs2/segment.c: In function 'nilfs_segctor_do_immediate_flush':
 fs/nilfs2/segment.c:2433:6: warning: variable 'err' set but not used [-Wunused-but-set-variable]
   int err;
       ^
   CC [M]  fs/nilfs2/sufile.o
 fs/nilfs2/sufile.c: In function 'nilfs_sufile_alloc':
 fs/nilfs2/sufile.c:320:27: warning: variable 'ncleansegs' set but not used [-Wunused-but-set-variable]
   unsigned long nsegments, ncleansegs, nsus, cnt;
                            ^
   CC [M]  fs/nilfs2/alloc.o
 fs/nilfs2/alloc.c: In function 'nilfs_palloc_prepare_alloc_entry':
 fs/nilfs2/alloc.c:478:38: warning: variable 'groups_per_desc_block' set but not used [-Wunused-but-set-variable]
   unsigned long n, entries_per_group, groups_per_desc_block;
                                       ^

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Ryusuke Konishi d8fd150fe3 nilfs2: fix sanity check of btree level in nilfs_btree_root_broken()
The range check for b-tree level parameter in nilfs_btree_root_broken()
is wrong; it accepts the case of "level == NILFS_BTREE_LEVEL_MAX" even
though the level is limited to values in the range of 0 to
(NILFS_BTREE_LEVEL_MAX - 1).

Since the level parameter is read from storage device and used to index
nilfs_btree_path array whose element count is NILFS_BTREE_LEVEL_MAX, it
can cause memory overrun during btree operations if the boundary value
is set to the level parameter on device.

This fixes the broken sanity check and adds a comment to clarify that
the upper bound NILFS_BTREE_LEVEL_MAX is exclusive.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-05-05 17:10:11 -07:00
Ryusuke Konishi 5b20384fb3 nilfs2: add bmap function to seek a valid key
Add a new bmap function, nilfs_bmap_seek_key(), which seeks a valid
entry and returns its key starting from a given key.  This function
can be used to skip hole blocks efficiently.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17 09:04:03 -04:00
Ryusuke Konishi 957ed60b53 nilfs2: fix potential memory overrun on inode
Each inode of nilfs2 stores a root node of a b-tree, and it turned out to
have a memory overrun issue:

Each b-tree node of nilfs2 stores a set of key-value pairs and the number
of them (in "bn_nchildren" member of nilfs_btree_node struct), as well as
a few other "bn_*" members.

Since the value of "bn_nchildren" is used for operations on the key-values
within the b-tree node, it can cause memory access overrun if a large
number is incorrectly set to "bn_nchildren".

For instance, nilfs_btree_node_lookup() function determines the range of
binary search with it, and too large "bn_nchildren" leads
nilfs_btree_node_get_key() in that function to overrun.

As for intermediate b-tree nodes, this is prevented by a sanity check
performed when each node is read from a drive, however, no sanity check
has been done for root nodes stored in inodes.

This patch fixes the issue by adding missing sanity check against b-tree
root nodes so that it's called when on-memory inodes are read from ifile,
inode metadata file.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-28 09:57:51 -08:00
Ryusuke Konishi d40990537c nilfs2: fix missing block address termination in btree node shrinking
nilfs_btree_delete function does not terminate part of virtual block
addresses when shrinking the last remaining child node into the root
node.  The missing address termination causes that dead btree node
blocks persist and chip away free disk space.

This fixes the leak bug on the btree node deletion.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-06-11 15:51:15 +09:00
Ryusuke Konishi fe744fdb74 nilfs2: fix incorrect block address termination in node concatenation
nilfs_btree_delete function wrongly terminates virtual block address
of the btree node held by its parent at index 0.  When concatenating
the index-0 node with its right sibling node, nilfs_btree_delete
terminates the block address of index-0 node instead of the right
sibling node which should be deleted.

This bug not only wears disk space in the long run, but also causes
file system corruption.  This will fix it.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-06-11 15:51:15 +09:00
Ryusuke Konishi 5fc7b14177 nilfs2: use mark_buffer_dirty to mark btnode or meta data dirty
This replaces nilfs_mdt_mark_buffer_dirty and nilfs_btnode_mark_dirty
macros with mark_buffer_dirty and gets rid of nilfs_mark_buffer_dirty,
an own mark buffer dirty function.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2011-05-10 22:21:57 +09:00
Ryusuke Konishi be667377a8 nilfs2: record used amount of each checkpoint in checkpoint list
This records the number of used blocks per checkpoint in each
checkpoint entry of cpfile.  Even though userland tools can get the
block count via nilfs_get_cpinfo ioctl, it was not updated by the
nilfs2 kernel code.  This fixes the issue and makes it available for
userland tools to calculate used amount per checkpoint.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Jiro SEKIBA <jir@unicus.jp>
2011-03-08 14:58:31 +09:00
Ryusuke Konishi 03bdb5ac58 nilfs2: apply read-ahead for nilfs_btree_lookup_contig
This applies read-ahead to nilfs_btree_do_lookup and
nilfs_btree_lookup_contig functions and extends them to read ahead
siblings of level 1 btree nodes that hold data blocks.

At present, the read-ahead is not applied to most btree operations;
only get_block() callback function, which is used during read of
regular files or directories, receives the benefit.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:16 +09:00
Ryusuke Konishi 4e13e66bee nilfs2: introduce check flag to btree node buffer
nilfs_btree_get_block() now may return untested buffer due to
read-ahead.  This adds a new flag for buffer heads so that the btree
code can check whether the buffer is already verified or not.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:15 +09:00
Ryusuke Konishi 464ece8863 nilfs2: add btree get block function with readahead option
This adds __nilfs_btree_get_block() function that can issue a series
of read-ahead requests for sibling btree nodes.

This read-ahead needs parent node block, so nilfs_btree_readahead_info
structure is added to pass the information that
__nilfs_btree_get_block() needs.

This also replaces the previous nilfs_btree_get_block() implementation
with a wrapper function of __nilfs_btree_get_block().

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:15 +09:00
Ryusuke Konishi 26dfdd8e29 nilfs2: add read ahead mode to nilfs_btnode_submit_block
This adds mode argument to nilfs_btnode_submit_block() function and
allows it to issue a read-ahead request.

An optional submit_ptr argument is also added to store the actual
block address for which bio is sent.  submit_ptr is used for a series
of read-ahead requests, and helps to decide if each requested block is
continous to the previous one on disk.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:15 +09:00
Ryusuke Konishi 7c397a81fe nilfs2: eliminate inline keywords in btree implementation
This removes all inline uses from btree.c.  Gcc now agressively apply
inline expansion even for the functions declared without the keyword;
the inline use in btree.c looks excessive.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:15 +09:00
Ryusuke Konishi 5ad2686e92 nilfs2: get maximum number of child nodes from bmap object
The patch "reduce repetitive calculation of max number of child nodes"
gathered up the calculation of maximum number of child nodes into
nilfs_btree_nchildren_per_block() function.  This makes the function
get resultant value from a private variable in bmap object instead of
calculating it for each call.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:14 +09:00
Ryusuke Konishi 9b7b265c9a nilfs2: reduce repetitive calculation of max number of child nodes
The current btree implementation repeats the same calculation on the
maximum number of child nodes.  This is because a few low level
routines use the calculation for index addressing in a btree node
block.

This reduces the calculation by explicitly passing the maximum number
of child nodes (ncmax) through their argument.

This changes parameter passing of the following functions:

 - nilfs_btree_node_dptrs
 - nilfs_btree_node_get_ptr
 - nilfs_btree_node_set_ptr
 - nilfs_btree_node_init
 - nilfs_btree_node_move_left
 - nilfs_btree_node_move_right
 - nilfs_btree_node_insert
 - nilfs_btree_node_delete, and
 - nilfs_btree_get_node

The following functions are removed:

 - nilfs_btree_node_nchildren_min
 - nilfs_btree_node_nchildren_max

Most middle level btree operations are rewritten to pass a proper
ncmax value depending on whether each occurrence of node is "root" or
not.

A constant NILFS_BTREE_ROOT_NCHILDREN_MAX is used for the root node,
whereas nilfs_btree_nchildren_per_block() function is used for
non-root nodes.  If a node could be either root or a non-root node, an
output argument of nilfs_btree_get_node() is used to set up ncmax.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:14 +09:00
Ryusuke Konishi ea64ab87cd nilfs2: optimize calculation of min/max number of btree node children
nilfs_btree_node_nchildren_max() and nilfs_btree_node_nchildren_min()
functions switch return value depending on whether target node is the
root or a node block.  In most uses of these functions, however, the
node type is fixed, and moreover the same calculation is repeatedly
performed in loop.

This unfold these functions depending on context and move them outside
loops wherever possible.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:14 +09:00
Ryusuke Konishi 364ec2d700 nilfs2: remove redundant pointer checks in bmap lookup functions
nilfs_bmap_lookup and its variants are supposed to take a valid
pointer argument to return a block address, thus pointer checks in
nilfs_btree_lookup and nilfs_direct_lookup are needless.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:14 +09:00
Ryusuke Konishi dc935be2a0 nilfs2: unify bmap set_target_v operations
This unifies two similar functions nilfs_btree_set_target_v and
nilfs_direct_set_target_v into one, nilfs_bmap_set_target_v.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:14 +09:00
Ryusuke Konishi e7c274f808 nilfs2: get rid of nilfs_btree uses
This replaces all uses of nilfs_btree struct in implementation of
btree mapping with nilfs_bmap struct.

Name of local variable "btree" is kept not to bloat amount of change.
And, a part of local variables "bmap" is renamed to "btree" to uniform
naming rule.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:13 +09:00
Ryusuke Konishi 583ada4761 nilfs2: remove constant qualifier from argument of bmap propagate
The first argument of bops->bop_propagate operation takes a constant
qualifier, and causes compilation error when removed cast to pointer
of nilfs_btree structure type.  This fixes the issue to prepare for
succesive removal of nilfs_btree struct.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:13 +09:00
Ryusuke Konishi 25b8d7ded0 nilfs2: get rid of private conversion macros on bmap key and pointer
Will remove nilfs_bmap_key_to_dkey(), nilfs_bmap_dkey_to_key(),
nilfs_bmap_ptr_to_dptr(), and nilfs_bmap_dptr_to_ptr() for simplicity.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:13 +09:00
Ryusuke Konishi 1d5385b9f3 nilfs2: verify btree node after reading
This inserts sanity checks soon after read btree node from disk.  This
allows early detection of broken btree nodes, and helps to narrow down
problems due to file system corruption.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:13 +09:00
Ryusuke Konishi cfa913a507 nilfs2: add sanity check in nilfs_btree_add_dirty_buffer
According to the report titled "problem with nilfs_cleanerd" from
Łukasz Wójcicki, nilfs_btree_lookup_dirty_buffers or
nilfs_btree_add_dirty_buffer got memory violation during garbage
collection.

This could happen if a level field of given btree node buffer is
incorrect, which is a crucial internal bug.

This inserts a sanity check to figure out the problem.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-07-23 10:02:12 +09:00
Li Hong 41c88bd74d nilfs2: cleanup multi kmem_cache_{create,destroy} code
This cleanup patch gives several improvements:

 - Moving all kmem_cache_{create_destroy} calls into one place, which removes
 some small function calls, cleans up error check code and clarify the logic.

 - Mark all initial code in __init section.

 - Remove some very obvious comments.

 - Adjust some declarations.

 - Fix some space-tab issues.

Signed-off-by: Li Hong <lihong.hi@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-05-10 11:32:30 +09:00
Li Hong 73bb48869b nilfs2: Combine nilfs_btree_release_path() and nilfs_btree_free_path()
nilfs_btree_release_path() and nilfs_btree_free_path() are bound into each other
tightly. Make them into one procedure to clearify the logic and avoid some
misusages.

Signed-off-by: Li Hong <lihong.hi@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-05-10 11:32:29 +09:00
Li Hong f905440f5e nilfs2: Combine nilfs_btree_alloc_path() and nilfs_btree_init_path()
nilfs_btree_alloc_path() and nilfs_btree_init_path() are bound into each other
tightly. Make them into one procedure to clearify the logic and avoid some
misusages.

Signed-off-by: Li Hong <lihong.hi@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-05-10 11:32:29 +09:00
Li Hong 308f44193f nilfs2: Remove an uninitialization warning in nilfs_btree_propagate_v()
`make CONFIG_NILFS2_FS=m M=fs/nilfs2/` will give the following warnings:

fs/nilfs2/btree.c: In function 'nilfs_btree_propagate':
fs/nilfs2/btree.c:1882: warning: 'maxlevel' may be used uninitialized in this function
fs/nilfs2/btree.c:1882: note: 'maxlevel' was declared here

Set maxlevel = 0 to fix it.

Signed-off-by: Li Hong <lihong.hi@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-04-02 20:03:30 +09:00
Ryusuke Konishi 0935db7477 nilfs2: use list_splice_tail or list_splice_tail_init
This applies list_splice_tail (or list_splice_tail_init) operation
instead of list_splice (or list_splice_init, respectively) to append a
new list to tail of an existing list.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-29 02:50:46 +09:00
Ryusuke Konishi 1376e931b7 nilfs2: eliminate nilfs_btnode_get function
This removes the obsolete nilfs_btnode_get() function and makes
nilfs_btree_get_block() directly call nilfs_btnode_submit_block().

This expansion will provide better opportunity for code optimization.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:50 +09:00
Ryusuke Konishi 45f4910bc0 nilfs2: use nilfs_btnode_create_block function
This displaces nilfs_btnode_get() use to create new btree node block
with nilfs_btnode_create_block.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:49 +09:00
Ryusuke Konishi 30db4e6c3d nilfs2: remove buffer locking from btree code
lock_buffer() and unlock_buffer() uses in btree.c are eliminable
because btree functions gain buffer heads through nilfs_btnode_get(),
which never returns an on-the-fly buffer.

Although nilfs_clear_dirty_page() and nilfs_copy_back_pages() in
nilfs_commit_gcdat_inode() juggle btree node buffers of DAT, this is
safe because these operations are protected by a log writer lock or
the metadata file semaphore of DAT.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:47 +09:00
Ryusuke Konishi 9b945d537d nilfs2: get rid of BUG_ON use in btree lookup routines
The current btree lookup routines make a kernel oops when detected
inconsistency in btree blocks.  These routines should instead return a
proper error code because the inconsistency usually comes from
corruption of on-disk metadata.

This fixes the issue by converting BUG_ON calls to proper error
handlings.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-20 10:05:46 +09:00
Ryusuke Konishi 2e0c2c7392 nilfs2: allow btree code to directly call dat operations
The current btree code is written so that btree functions call dat
operations via wrapper functions in bmap.c when they allocate, free,
or modify virtual block addresses.

This abstraction requires additional function calls and causes
frequent call of nilfs_bmap_get_dat() function since it is used in the
every wrapper function.

This removes the wrapper functions and makes them available from
btree.c and direct.c, which will increase the opportunity of
compiler optimization.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14 18:27:16 +09:00
Ryusuke Konishi 3218929dbd nilfs2: stop zero-fill of btree path just before free it
The btree path object is cleared just before it is freed.

This will remove the code doing the unnecessary clear operation.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14 18:27:15 +09:00
Ryusuke Konishi 6d28f7ea43 nilfs2: remove unused btree argument from btree functions
Even though many btree functions take a btree object as their first
argument, most of them are not used in their functions.

This sticky use of the btree argument is hurting code readability and
giving the possibility of inefficient code generation.

So, this removes the unnecessary btree arguments.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-09-14 18:27:15 +09:00
Ryusuke Konishi c3a7abf06c nilfs2: support contiguous lookup of blocks
Although get_block() callback function can return extent of contiguous
blocks with bh->b_size, nilfs_get_block() function did not support
this feature.

This adds contiguous lookup feature to the block mapping codes of
nilfs, and allows the nilfs_get_blocks() function to return the extent
information by applying the feature.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:12 +09:00
Ryusuke Konishi 7cde31d7d6 nilfs2: remove nilfs_btree_operations from btree mapping
will remove indirect function calls using nilfs_btree_operations
table.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:11 +09:00
Ryusuke Konishi d4b961576d nilfs2: remove bmap pointer operations
Previously, the bmap codes of nilfs used three types of function
tables.  The abuse of indirect function calls decreased source
readability and suffered many indirect jumps which would confuse
branch prediction of processors.

This eliminates one type of the function tables,
nilfs_bmap_ptr_operations, which was used to dispatch low level
pointer operations of the nilfs bmap.

This adds a new integer variable "b_ptr_type" to nilfs_bmap struct,
and uses the value to select the pointer operations.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:10 +09:00
Ryusuke Konishi 3033342a0b nilfs2: remove useless b_low and b_high fields from nilfs_bmap struct
This will cut off 16 bytes from the nilfs_bmap struct which is
embedded in the on-memory inode of nilfs.

The b_high field was never used, and the b_low field stores a constant
value which can be determined by whether the inode uses btree for
block mapping or not.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:10 +09:00
Ryusuke Konishi e473c1f265 nilfs2: remove pointless NULL check of bpop_commit_alloc_ptr function
This indirect function is set to NULL only for gc cache inodes, but
the gc cache inodes never call this function.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:10 +09:00
Ryusuke Konishi f198dbb9cf nilfs2: move get block functions in bmap.c into btree codes
Two get block function for btree nodes, nilfs_bmap_get_block() and
nilfs_bmap_get_new_block(), are called only from the btree codes.
This relocation will increase opportunities of compiler optimization.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:10 +09:00
Ryusuke Konishi 9f098900ad nilfs2: remove nilfs_bmap_delete_block
nilfs_bmap_delete_block() is a wrapper function calling
nilfs_btnode_delete().  This removes it for simplicity.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:10 +09:00