Commit Graph

200 Commits

Author SHA1 Message Date
FUJITA Tomonori 4a531e8c79 [SCSI] replace u8 and u32 with __u8 and __u32 in scsi.h for user space
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25 15:14:34 -07:00
Hannes Reinecke 5a09e39810 [SCSI] scsi_debug: support REPORT TARGET PORT GROUPS
This patch adds support for REPORT TARGET PORT GROUPS. This is used
eg for the multipathing priority callout to determine the path
priority.
With this patch multipath-tools can use the existing mpath_prio_alua
callout to exercise the path priority grouping.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25 15:14:13 -07:00
Mike Christie 9864404791 [SCSI] libiscsi: fix oops in connection create failure path
If connection creation fails we end up calling list_del
on a invalid struct. This then causes an oops. We are not
acutally using the lists (old MCS code we thought might
be useful elsewhere) so this patch just removes that
code.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25 15:13:53 -07:00
Mike Christie 43a145a344 [SCSI] iscsi class: fix slab corruption during restart
The transport class recv mempools are causing slab corruption.
We could hack around netlink's lack of mempool support like dm,
but it is just too ulgy (dm's hack is ugly enough :) when you need
to support broadcast.

This patch removes the recv pools. We have not used them even when
we were allocting 20 MB per session and the system only had 64 MBs.
And we have no pools on the send side and have been ok there. When
Peter's work gets merged we can use that since the network guys
are in favor of that approach and are not going to add mempools
everywhere.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25 15:13:48 -07:00
Linus Torvalds 97d41e90fe Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (54 commits)
  [SCSI] Initial Commit of qla4xxx
  [SCSI] raid class: handle component-add errors
  [SCSI] SCSI megaraid_sas: handle thrown errors
  [SCSI] SCSI aic94xx: handle sysfs errors
  [SCSI] SCSI st: fix error handling in module init, sysfs
  [SCSI] SCSI sd: fix module init/exit error handling
  [SCSI] SCSI osst: add error handling to module init, sysfs
  [SCSI] scsi: remove hosts.h
  [SCSI] scsi: Scsi_Cmnd convertion in aic7xxx_old.c
  [SCSI] megaraid_sas: sets ioctl timeout and updates version,changelog
  [SCSI] megaraid_sas: adds tasklet for cmd completion
  [SCSI] megaraid_sas: prints pending cmds before setting hw_crit_error
  [SCSI] megaraid_sas: function pointer for disable interrupt
  [SCSI] megaraid_sas: frame count optimization
  [SCSI] megaraid_sas: FW transition and q size changes
  [SCSI] qla2xxx: Update version number to 8.01.07-k2.
  [SCSI] qla2xxx: Stall mid-layer error handlers while rport is blocked.
  [SCSI] qla2xxx: Add MODULE_FIRMWARE tags.
  [SCSI] qla2xxx: Add support for host port state FC transport attribute.
  [SCSI] qla2xxx: Add support for fabric name FC transport attribute.
  ...
2006-10-04 18:57:35 -07:00
David C Somayajulu f583f4924d [PATCH] helper function for retrieving scsi_cmd given host based block layer tag
This was necessitated by the need for a function to get back
to a scsi_cmnd, when an hba the posts its (corresponding) completion
interrupt with a block layer tag as its reference.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: David Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2006-10-04 19:32:09 +02:00
Andrew Morton cb5d9e0948 [PATCH] scsi: device_reprobe() can fail
device_reprobe() should return an error code.  When it does so,
scsi_device_reprobe() should propagate it back.

Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-30 19:33:43 -07:00
David Howells 9361401eb7 [PATCH] BLOCK: Make it possible to disable the block layer [try #6]
Make it possible to disable the block layer.  Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.

This patch does the following:

 (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
     support.

 (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
     an item that uses the block layer.  This includes:

     (*) Block I/O tracing.

     (*) Disk partition code.

     (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.

     (*) The SCSI layer.  As far as I can tell, even SCSI chardevs use the
     	 block layer to do scheduling.  Some drivers that use SCSI facilities -
     	 such as USB storage - end up disabled indirectly from this.

     (*) Various block-based device drivers, such as IDE and the old CDROM
     	 drivers.

     (*) MTD blockdev handling and FTL.

     (*) JFFS - which uses set_bdev_super(), something it could avoid doing by
     	 taking a leaf out of JFFS2's book.

 (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
     linux/elevator.h contingent on CONFIG_BLOCK being set.  sector_div() is,
     however, still used in places, and so is still available.

 (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
     parts of linux/fs.h.

 (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.

 (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.

 (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
     is not enabled.

 (*) fs/no-block.c is created to hold out-of-line stubs and things that are
     required when CONFIG_BLOCK is not set:

     (*) Default blockdev file operations (to give error ENODEV on opening).

 (*) Makes some /proc changes:

     (*) /proc/devices does not list any blockdevs.

     (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.

 (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.

 (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
     given command other than Q_SYNC or if a special device is specified.

 (*) In init/do_mounts.c, no reference is made to the blockdev routines if
     CONFIG_BLOCK is not defined.  This does not prohibit NFS roots or JFFS2.

 (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
     error ENOSYS by way of cond_syscall if so).

 (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
     CONFIG_BLOCK is not set, since they can't then happen.

Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 20:52:31 +02:00
Jens Axboe 4aff5e2333 [PATCH] Split struct request ->flags into two parts
Right now ->flags is a bit of a mess: some are request types, and
others are just modifiers. Clean this up by splitting it into
->cmd_type and ->cmd_flags. This allows introduction of generic
Linux block message types, useful for sending generic Linux commands
to block devices.

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-09-30 20:23:37 +02:00
Andrew Morton 8350a348e9 [SCSI] scsi: device_reprobe() can fail
device_reprobe() should return an error code.  When it does so,
scsi_device_reprobe() should propagate it back.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-27 12:26:58 -07:00
Douglas Gilbert 6460e75a10 [SCSI] sg: fixes for large page_size
This sg driver patch addresses the problem with larger
page sizes reported by Brian King in this post:
http://marc.theaimsgroup.com/?l=linux-scsi&m=115867718623631&w=2
Some other related matters are also addressed. Some of these
prevent oopses when the SG_SCATTER_SZ or scatter_elem_sz are
set to inappropriate values.

The scatter_elem_sz has been tested up to 4 MB which should
make the largest data transfer with one SCSI command, 32 MB
less one block, achievable with a relatively small number
of elements in the scatter gather list.

ChangeLog:
    - add scatter_elem_sz boot time parameter and sysfs module
      parameter that is initialized to SG_SCATTER_SZ
    - the driver will then adjust scatter_elem_sz to be the
      max(given(scatter_elem_sz), PAGE_SIZE)
      It will also round it up, if necessary, to be a power
      of two
    - clean up sg.h header, correct bad urls and some statements
      that are no longer valid
    - make the def_reserved_size sysfs module attribute writable

Signed-off-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-26 09:23:15 -07:00
Al Viro 3cc27547d6 [PATCH] SCSI gfp_t annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-24 20:07:49 -07:00
James Bottomley dfdc58ba35 [SCSI] SPI transport class: misc DV fixes
Key more of the domain validation settings off the inquiry data from
the disk (in particular, don't try IU or DT unless the disk claims to
support them.

Also add a new dv_in_progress flag to prevent recursive DV.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23 20:53:53 -05:00
James Bottomley c9802cd957 Merge mulgrave-w:git/scsi-misc-2.6
Conflicts:

	drivers/scsi/iscsi_tcp.c
	drivers/scsi/iscsi_tcp.h

Pretty horrible merge between crypto hash consolidation
and crypto_digest_...->crypto_hash_... conversion

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-23 15:33:43 -05:00
David Woodhouse fadcfa33b6 [HEADERS] One line per header in Kbuild files to reduce conflicts
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-19 12:43:58 +01:00
James Bottomley a01e70e570 [SCSI] aci94xx: implement link rate setting
This patch implements the ability to set the minimum and maximum
linkrates for both libsas (for expanders) and aic94xx (for the host
phys).  It also tidies up the setting of the hardware min and max to
make sure they're updated when the expander emits a change broadcast.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-07 15:20:23 -05:00
James Bottomley d24e1eeb3a [SCSI] scsi_transport_sas: make minimum and maximum linkrate settable quantities
According to SPEC, the minimum_linkrate and maximum_linkrate should be
settable by the user.  This patch introduces a callback that allows the
sas class to pass these settings on to the driver.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-07 15:16:44 -05:00
James Bottomley 88edf74610 [SCSI] SAS: consolidate linkspeed definitions
At the moment we have two separate linkspeed enumerations covering
roughly the same values.  This patch consolidates on a single one enum
sas_linkspeed in scsi_transport_sas.h and uses it everywhere in the
aic94xx driver.  Eventually I'll get around to removing the duplicated
fields in asd_sas_phy and sas_phy ...

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-07 12:41:16 -05:00
James Smart 0f29b966d6 [SCSI] FC transport: Add dev_loss_tmo callbacks, and new fast_io_fail_tmo w/ callback
This patch adds the following functionality to the FC transport:

- dev_loss_tmo LLDD callback :
  Called to essentially confirm the deletion of an rport. Thus, it is
  called whenever the dev_loss_tmo fires, or when the rport is deleted
  due to other circumstances (module unload, etc).  It is expected that
  the callback will initiate the termination of any outstanding i/o on
  the rport.

- fast_io_fail_tmo and LLD callback:
  There are some cases where it may take a long while to truly determine
  device loss, but the system is in a multipathing configuration that if
  the i/o was failed quickly (faster than dev_loss_tmo), it could be
  redirected to a different path and completed sooner.

Many thanks to Mike Reed who cleaned up the initial RFC in support
of this post.

The original RFC is at:
http://marc.theaimsgroup.com/?l=linux-scsi&m=115505981027246&w=2

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-04 21:22:05 -05:00
James Smart f14e2e29cd [SCSI] SCSI & FC transport: extend event vendor id's to 64bits
During discussions with Mike Christie, I became convinced that we needed
a larger vendor id. This patch extends the id from 32 to 64 bits.

This applies on top of the prior patches that add SCSI transport events
via netlink.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02 15:35:15 -05:00
James Smart 84314fd474 [SCSI] SCSI and FC Transport: add netlink support for posting of transport events
This patch formally adds support for the posting of FC events via netlink.
It is a followup to the original RFC at:
  http://marc.theaimsgroup.com/?l=linux-scsi&m=114530667923464&w=2
and the initial posting at:
  http://marc.theaimsgroup.com/?l=linux-scsi&m=115507374832500&w=2

The patch has been updated to optimize the send path, per the discussions
in the initial posting.

Per discussions at the Storage Summit and at OLS, we are to use netlink for
async events from transports. Also per discussions, to avoid a netlink
protocol per transport, I've create a single NETLINK_SCSITRANSPORT protocol,
which can then be used by all transports.

This patch:
- Creates new files scsi_netlink.c and scsi_netlink.h, which contains the
  single and shared definitions for the SCSI Transport. It is tied into the
  base SCSI subsystem intialization.
  Contains a single interface routine, scsi_send_transport_event(), for a
  transport to send an event (via multicast to a protocol specific group).
- Creates a new scsi_netlink_fc.h file, which contains the FC netlink event
  messages
- Adds 3 new routines to the fc transport:
   fc_get_event_number() -  to get a FC event #
   fc_host_post_event()  -  to send a simple FC event (32 bits of data)
   fc_host_post_vendor_event() - to send a Vendor unique event, with
                                 arbitrary amounts of data.

   Note: the separation of event number allows for a LLD to send a standard
     event, followed by vendor-specific data for the event.

Note: This patch assumes 2 prior fc transport patches have been installed:
   http://marc.theaimsgroup.com/?l=linux-scsi&m=115555807316329&w=2
   http://marc.theaimsgroup.com/?l=linux-scsi&m=115581614930261&w=2

   Sorry - next time I'll do something like making these individual
   patches of the same posting when I know they'll be posted closely
   together.

Signed-off-by: James Smart <James.Smart@emulex.com>

Tidy up configuration not to make SCSI always select NET

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02 15:33:49 -05:00
James Bottomley deb81d80ba [SCSI] add failure return to scsi_init_shared_tag_map()
And use it in the stex driver.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02 13:57:28 -05:00
Mike Christie 60ecebf5a1 [SCSI] add refcouting around ctask usage in main IO patch
It is possible that a ctask could be completing and getting
cleaned up at the same time, we are finishing up the last
data transfer. This could then result in the data transfer
code using stale or invalid values. This patch adds a refcount
to the ctask. When the count goes to zero then we know the
transmit thread and recv thread or softirq are not touching
it and we can safely release it.

The eh should not need to grab a reference because it only cleans
up a task if it has both the xmit mutex and recv lock (or recv
side suspended).

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02 13:37:07 -05:00
Mike Christie ffd0436ed2 [SCSI] libiscsi, iscsi_tcp, iscsi_iser: check that burst lengths are valid.
iSCSI RFC states that the first burst length must be smaller than the
max burst length. We currently assume targets will be good, but that may
not be the case, so this patch adds a check.

This patch also moves the unsol data out offset to the lib so the LLDs
do not have to track it.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02 13:37:04 -05:00
James Bottomley 86e33a296c [SCSI] add shared tag map helpers
This patch adds support for sharing tag maps at the host level
(i.e. either every queue [LUN] has its own tag map or there's a single
one for the entire host).  This formulation is primarily intended to
help single issue queue hardware, like the aic7xxx

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-31 11:18:03 -04:00
James Bottomley 2908d778ab [SCSI] aic94xx: new driver
This is the end point of the separate aic94xx driver based on the
original driver and transport class from Luben Tuikov
<ltuikov@yahoo.com>

The log of the separate development is:

Alexis Bruemmer:
  o aic94xx: fix hotplug/unplug for expanderless systems
  o aic94xx: disable split completion timer/setting by default
  o aic94xx: wide port off expander support
  o aic94xx: remove various inline functions
  o aic94xx: use bitops
  o aic94xx: remove queue comment
  o aic94xx: remove sas_common.c
  o aic94xx: sas remove depot's
  o aic94xx: use available list_for_each_entry_safe_reverse()
  o aic94xx: sas header file merge

James Bottomley:
  o aic94xx: fix TF_TMF_NO_CTX processing
  o aic94xx: convert to request_firmware interface
  o aic94xx: fix hotplug/unplug
  o aic94xx: add link error counts to the expander phys
  o aic94xx: add transport class phy reset capability
  o aic94xx: remove local_attached flag
  o Remove README
  o Fixup Makefile variable for libsas rename
  o Rename sas->libsas
  o aic94xx: correct return code for sas_discover_event
  o aic94xx: use parent backlink port
  o aic94xx: remove channel abstraction
  o aic94xx: fix routing algorithms
  o aic94xx: add backlink port
  o aic94xx: fix cascaded expander properties
  o aic94xx: fix sleep under lock
  o aic94xx: fix panic on module removal in complex topology
  o aic94xx: make use of the new sas_port
  o rename sas_port to asd_sas_port
  o Fix for eh_strategy_handler move
  o aic94xx: move entirely over to correct transport class formulation
  o remove last vestages of sas_rphy_alloc()
  o update for eh_timed_out move
  o Preliminary expander support for aic94xx
  o sas: remove event thread
  o minor warning cleanups
  o remove last vestiges of id mapping arrays
  o Further updates
  o Convert aic94xx over entirely to the transport class end device and
  o update aic94xx/sas to use the new sas transport class end device
  o [PATCH] aic94xx: attaching to the sas transport class
  o Add missing completion removal from prior patch
  o [PATCH] aic94xx: attaching to the sas transport class
  o Build fixes from akpm

Jeff Garzik:
  o [scsi aic94xx] Remove ->owner from PCI info table

Luben Tuikov:
  o initial aic94xx driver

Mike Anderson:
  o aic94xx: fix panic on module insertion
  o aic94xx: stub out SATA_DEV case
  o aic94xx: compile warning cleanups
  o aic94xx: sas_alloc_task
  o aic94xx: ref count update
  o aic94xx nexus loss time value
  o [PATCH] aic94xx: driver assertion in non-x86 BIOS env

Randy Dunlap:
  o libsas: externs not needed

Robert Tarte:
  o aic94xx: sequence patch - fixes SATA support

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 09:52:29 -05:00
James Bottomley f4ad7b5807 [SCSI] scsi_transport_sas: remove local_attached flag
This flag denotes local attachment of the phy.  There are two problems
with it:

1) It's actually redundant ... you can get the same information simply
by seeing whether a host is the phys parent
2) we condition a lot of phy parameters on it on the false assumption
that we can only control local phys.  I'm wiring up phy resets in the
aic94xx now, and it will be able to reset non-local phys as well.

I fixed 2) by moving the local check into the reset and stats function
of the mptsas, since that seems to be the only HBA that can't
(currently) control non-local phys.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-27 22:30:11 -05:00
James Bottomley 8ce7a9c159 Merge ../linux-2.6 2006-08-27 21:59:59 -05:00
James Smart b8d0821012 [SCSI] fc transport: add fc_host system_hostname attribute and u64_to_wwn()
This patch updates the fc transport for the following:

- Addition of a new attribute "system_hostname" which can be
  used to set the fully qualified hostname that the fc_host
  is attached to. The fc_host can then register this string
  as the FDMI-based host name attribute.
  Note: for NPIV, a fc_host could be associated with a system which
    is not the local system.

- Add the inline function u64_to_wwn(), which is the inverse of the
  existing wwn_to_u64() function.

- Slight reorg, just to keep dynamic attributes with each other, etc

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19 13:43:10 -07:00
James Smart 016131b8ff [SCSI] fc transport: convert fc_host symbolic_name attribute to a dynamic attribute
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19 13:40:07 -07:00
Matthew Wilcox 4ff36718ed [SCSI] Improve inquiry printing
- Replace scsi_device_types array API with scsi_device_type function API.
   Gets rid of a lot of common code, as well as being easier to use.
 - Add the new device types in SPC4 r05a, and rename some of the older ones.
 - Reformat the printing of inquiry data; now fits on one line and
   includes PQ.

I think I've addressed all the feedback from the previous versions.  My
current test box prints:

scsi 2:0:1:0: Direct access     HP 18.2G ATLAS10K3_18_SCA HP05 PQ: 0 ANSI: 2

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06 15:59:26 -05:00
Christoph Hellwig 9e5c50fa86 [SCSI] remove SCSI_STATE_ #defines
These aren't used anymore since the field in scsi_cmnd where it was
stored has been removed.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06 11:35:39 -05:00
Mike Christie c8dc1e523b [SCSI] iscsi bugfixes: reduce memory allocations
We currently try to allocate a max_recv_data_segment_length
which can be very large (default is 64K), and common uses
are up to 1MB. It is very very difficult to allocte this
much contiguous memory and it turns out we never even use it.
We really only need a couple of pages, so this patch has us
allocates just what we know what we need today.

Later if vendors start adding vendor specific data and
we need to handle large buffers we can do this, but for
the last 4 years we have not seen anyone do this or request
it.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-28 11:49:34 -05:00
Mike Christie 1c83469d36 [SCSI] iscsi bugfixes: fix oops when iser is flushing io
When we enter recovery and flush the running commands
we cannot freee the connection before flushing the commands.
Some commands may have a reference to the connection
that needs to be released before. iscsi_stop was forcing
the term and suspend too early and was causing a oops
in iser, so this patch removes those callbacks all together
and allows the LLD to handle that detail.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-28 11:48:32 -05:00
Mike Christie 7ea8b82847 [SCSI] iscsi bugfixes: fix abort handling
Abort handler fixes.

If a connection is dropped and reconnected while an abort is
running then we should assume the recovery code will clean up
the abort. Not doing so causes a oops.

And if a command completes then we get the status for the abort, we do not
need to call into the LLD to cleanup the resources. Doing this causes
and oops in iser because it ends up freeing some resources twice.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-28 11:48:16 -05:00
Mike Christie b6c395ed03 [SCSI] iscsi bugfixes: fix r2t handling
The iscsi tcp code can pluck multiple rt2s from the tasks's r2tqueue
in the xmit code. This can result in the task being queued on the xmit queue
but gettting completed at the same time.

This patch fixes the above bug by making the fifo a list so
we always remove the entry on the list del.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-28 11:47:40 -05:00
James Bottomley a0e1b6ef3b [SCSI] scsi_transport_sas: add expander backlink
This patch adds the ability to add a backlink to a particular port.  The
idea is to represent properly ports on expanders that are used
specifically for linking to the parent device in the topology.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-12 09:03:20 -04:00
Christoph Hellwig 631c228cd0 [SCSI] hide EH backup data outside the scsi_cmnd
Currently struct scsi_cmnd has various fields that are used to backup
original data after the corresponding fields have been overridden for
EH commands.  This means drivers can easily get at it and misuse it.
Due to the old_ naming this doesn't happen for most of them, but two
that have different names have been used wrong a lot (see previous
patch).  Another downside is that they unessecarily bloat the scsi_cmnd
size.

This patch moves them onstack in scsi_send_eh_cmnd to fix those two
issues aswell as allowing future EH fixes like moving the EH command
submissions to use SG lists like everything else.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09 11:56:44 -05:00
James Bottomley c9fefeb264 [SCSI] scsi_transport_sas: add unindexed ports
Some SAS HBAs don't want to go to the trouble of tracking port numbers,
so they'd simply like to say "add this port and give it a number".
This is especially beneficial from the hotplug point of view, since
tracking ports and the available number space can be a real pain.

The current implementation uses an incrementing number per expander to
add the port on.  However, since there can never be more ports than
there are phys, a later implementation will try to be more intelligent
about this.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09 09:06:24 -05:00
Linus Torvalds 6fa0cb1141 Merge git://git.infradead.org/hdrinstall-2.6
* git://git.infradead.org/hdrinstall-2.6:
  Remove export of include/linux/isdn/tpam.h
  Remove <linux/i2c-id.h> and <linux/i2c-algo-ite.h> from userspace export
  Restrict headers exported to userspace for SPARC and SPARC64
  Add empty Kbuild files for 'make headers_install' in remaining arches.
  Add Kbuild file for Alpha 'make headers_install'
  Add Kbuild file for SPARC 'make headers_install'
  Add Kbuild file for IA64 'make headers_install'
  Add Kbuild file for S390 'make headers_install'
  Add Kbuild file for i386 'make headers_install'
  Add Kbuild file for x86_64 'make headers_install'
  Add Kbuild file for PowerPC 'make headers_install'
  Add generic Kbuild files for 'make headers_install'
  Basic implementation of 'make headers_check'
  Basic implementation of 'make headers_install'
2006-07-04 12:55:45 -07:00
Mike Christie 53cb8a1f45 [SCSI] iscsi: add async notification of session events
This patch adds or modifies the transport class functions
used to notify userspace of session state events.

We modify the session addition up event and add a destruction event
to notify userspace of session creation, relogin and destruction.

And we modify the conn error event to be sent by broadcast
since multiple listeners may want to listen for it.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-29 11:14:42 -04:00
Mike Christie 6a8a0d3621 [SCSI] iscsi: pass target nr to session creation
So the drivers do not use the channel numbers, but some do
use the target numbers. We were just adding some goofy
variable that just increases for the target nr. This is useless
for software iscsi because it is always zero. And for qla4xxx
the target nr is actually the index of the target/session
in its FW or FLASH tables. We needed to expose this to userspace
so apps could access those numbers so this patch just adds the
target nr to the iscsi session creation functions. This way
when qla4xxx's Hw thinks a session is at target nr 4
in its hw, it is exposed as that number in sysfs.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-29 11:09:06 -04:00
Mike Christie 8434aa8b6f [SCSI] iscsi: break up session creation into two stages
qla4xxx is initialized in two steps like other HW drivers.
It allocates the host, sets up the HW, then adds the host.
For iscsi part of HW setup is setting up persistent iscsi
sessions. At that time, the interupts are off and the driver
is not completely set up so we just want to allocate them.
We do not want to add them to sysfs and expose them to userspace
because userspace could try to do lots of fun things with them
like scanning and at that time the driver is not ready.

So this patch breakes up the session creation like other
functions that use the driver model in two the alloc
and add parts. When the driver is ready, it can then add
the sessions and userspace can begin using them.

This also fixes a bug in the addition error patch where
we forgot to do a get on the session.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-29 11:08:46 -04:00
Mike Christie e6f3b63f50 [SCSI] iscsi: rm channel usage from iscsi
I do not remember what I was thinking when we added the channel
as a argument to the session create function. It was probably
due to too much cut and paste work from the FC transport class.

The channel is meaningless for iscsi drivers so this patch drops
its usage everywhere in the iscsi related code.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-29 11:08:31 -04:00
Mike Christie a54a52caad [SCSI] iscsi: fixup set/get param functions
Reduce duplication in the software iscsi_transport modules by
adding a libiscsi function to handle the common grunt work.

This also has the drivers return specifc -EXXX values for different
errors so userspace can finally handle them in a sane way.

Also just pass the sysfs buffers to the drivers so HW iscsi can
get/set its string values, like targetname, and initiatorname.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-29 11:07:14 -04:00
Mike Christie 01cb225dad [SCSI] iscsi: add target discvery event to transport class
Patch from david.somayajulu@qlogic.com:

Add target discovery event. We may have a setup where the iscsi traffic
is on a different netowrk than the other network traffic. In this case
we will want to do discovery though the iscsi card. This patch adds
a event to the transport class that can be used by hw iscsi cards that
support this.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-29 11:06:59 -04:00
James Bottomley 65c92b09ac [SCSI] scsi_transport_sas: introduce a sas_port entity
this patch introduces a port object, separates out ports and phys,
with ports becoming the primary objects of the tree.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28 12:40:54 -04:00
James Smart d7a1bb0a04 [SCSI] Block I/O while SG reset operation in progress - the midlayer patch
The scsi midlayer portion of the patch

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-27 10:48:11 -05:00
Luben Tuikov 03aba2f795 [SCSI] sd/scsi_lib simplify sd_rw_intr and scsi_io_completion
This patch simplifies "good_bytes" computation in sd_rw_intr().
sd: "good_bytes" computation is always done in terms of the resolution
of the device's medium, since after that it is the number of good bytes
we pass around and other layers/contexts (as opposed ot sd) can translate
that to their own resolution (block layer:512).  It also makes
scsi_io_completion() processing more straightforward, eliminating the
3rd argument to the function.

It also fixes a couple of bugs like not checking return value,
using "break" instead of "return;", etc.

I've been running with this patch for some time now on a
test (do-it-all) system.

Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26 10:00:20 -05:00
Jeff Garzik 71d530cd1b Merge branch 'master' into upstream
Conflicts:

	drivers/scsi/libata-core.c
	drivers/scsi/libata-scsi.c
	include/linux/pci_ids.h
2006-06-22 22:11:56 -04:00