Commit Graph

104 Commits

Author SHA1 Message Date
Cong Wang 2408f6ef6b fuse: remove the second argument of k[un]map_atomic()
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-03-20 21:48:22 +08:00
John Muir 451d0f5999 FUSE: Notifying the kernel of deletion.
Allows a FUSE file-system to tell the kernel when a file or directory is
deleted. If the specified dentry has the specified inode number, the kernel will
unhash it.

The current 'fuse_notify_inval_entry' does not cause the kernel to clean up
directories that are in use properly, and as a result the users of those
directories see incorrect semantics from the file-system. The error condition
seen when 'fuse_notify_inval_entry' is used to notify of a deleted directory is
avoided when 'fuse_notify_delete' is used instead.

The following scenario demonstrates the difference:
1. User A chdirs into 'testdir' and starts reading 'testfile'.
2. User B rm -rf 'testdir'.
3. User B creates 'testdir'.
4. User C chdirs into 'testdir'.

If you run the above within the same machine on any file-system (including fuse
file-systems), there is no problem: user C is able to chdir into the new
testdir. The old testdir is removed from the dentry tree, but still open by user
A.

If operations 2 and 3 are performed via the network such that the fuse
file-system uses one of the notify functions to tell the kernel that the nodes
are gone, then the following error occurs for user C while user A holds the
original directory open:

muirj@empacher:~> ls /test/testdir
ls: cannot access /test/testdir: No such file or directory

The issue here is that the kernel still has a dentry for testdir, and so it is
requesting the attributes for the old directory, while the file-system is
responding that the directory no longer exists.

If on the other hand, if the file-system can notify the kernel that the
directory is deleted using the new 'fuse_notify_delete' function, then the above
ls will find the new directory as expected.

Signed-off-by: John Muir <john@jmuir.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2011-12-13 11:58:49 +01:00
Miklos Szeredi 48706d0a91 fuse: fix fuse_retrieve
Fix two bugs in fuse_retrieve():

 - retrieving more than one page would yield repeated instances of the
   first page

 - if more than FUSE_MAX_PAGES_PER_REQ pages were requested than the
   request page array would overflow

fuse_retrieve() was added in 2.6.36 and these bugs had been there since the
beginning.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: stable@vger.kernel.org
2011-12-13 10:36:59 +01:00
Miklos Szeredi 5dfcc87fd7 fuse: fix memory leak
kmemleak is reporting that 32 bytes are being leaked by FUSE:

  unreferenced object 0xe373b270 (size 32):
  comm "fusermount", pid 1207, jiffies 4294707026 (age 2675.187s)
  hex dump (first 32 bytes):
    01 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<b05517d7>] kmemleak_alloc+0x27/0x50
    [<b0196435>] kmem_cache_alloc+0xc5/0x180
    [<b02455be>] fuse_alloc_forget+0x1e/0x20
    [<b0245670>] fuse_alloc_inode+0xb0/0xd0
    [<b01b1a8c>] alloc_inode+0x1c/0x80
    [<b01b290f>] iget5_locked+0x8f/0x1a0
    [<b0246022>] fuse_iget+0x72/0x1a0
    [<b02461da>] fuse_get_root_inode+0x8a/0x90
    [<b02465cf>] fuse_fill_super+0x3ef/0x590
    [<b019e56f>] mount_nodev+0x3f/0x90
    [<b0244e95>] fuse_mount+0x15/0x20
    [<b019d1bc>] mount_fs+0x1c/0xc0
    [<b01b5811>] vfs_kern_mount+0x41/0x90
    [<b01b5af9>] do_kern_mount+0x39/0xd0
    [<b01b7585>] do_mount+0x2e5/0x660
    [<b01b7966>] sys_mount+0x66/0xa0

This leak report is consistent and happens once per boot on
3.1.0-rc5-dirty.

This happens if a FORGET request is queued after the fuse device was
released.

Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-12 11:47:10 -07:00
Miklos Szeredi c2183d1e9b fuse: check size of FUSE_NOTIFY_INVAL_ENTRY message
FUSE_NOTIFY_INVAL_ENTRY didn't check the length of the write so the
message processing could overrun and result in a "kernel BUG at
fs/fuse/dev.c:629!"

Reported-by: Han-Wen Nienhuys <hanwenn@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: stable@kernel.org
2011-08-24 10:20:17 +02:00
Miklos Szeredi ef6a3c6311 mm: add replace_page_cache_page() function
This function basically does:

     remove_from_page_cache(old);
     page_cache_release(old);
     add_to_page_cache_locked(new);

Except it does this atomically, so there's no possibility for the "add" to
fail because of a race.

If memory cgroups are enabled, then the memory cgroup charge is also moved
from the old page to the new.

This function is currently used by fuse to move pages into the page cache
on read, instead of copying the page contents.

[minchan.kim@gmail.com: add freepage() hook to replace_page_cache_page()]
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:02 -07:00
Bryan Green 357ccf2b69 fuse: wakeup pollers on connection release/abort
If a fuse dev connection is broken, wake up any
processes that are blocking, in a poll system call,
on one of the files in the now defunct filesystem.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2011-03-21 13:58:05 +01:00
Miklos Szeredi 02c048b919 fuse: allow batching of FORGET requests
Terje Malmedal reports that a fuse filesystem with 32 million inodes
on a machine with lots of memory can take up to 30 minutes to process
FORGET requests when all those inodes are evicted from the icache.

To solve this, create a BATCH_FORGET request that allows up to about
8000 FORGET requests to be sent in a single message.

This request is only sent if userspace supports interface version 7.16
or later, otherwise fall back to sending individual FORGET messages.

Reported-by: Terje Malmedal <terje.malmedal@usit.uio.no>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-12-07 20:16:56 +01:00
Miklos Szeredi 07e77dca8a fuse: separate queue for FORGET requests
Terje Malmedal reports that a fuse filesystem with 32 million inodes
on a machine with lots of memory can go unresponsive for up to 30
minutes when all those inodes are evicted from the icache.

The reason is that FORGET messages, sent when the inode is evicted,
are queued up together with regular filesystem requests, and while the
huge queue of FORGET messages are processed no other filesystem
operation can proceed.

Since a full fuse request structure is allocated for each inode, these
take up quite a bit of memory as well.

To solve these issues, create a slim 'fuse_forget_link' structure
containing just the minimum of information required to send the FORGET
request and chain these on a separate queue.

When userspace is asking for a request make sure that FORGET and
non-FORGET requests are selected fairly: for each 8 non-FORGET allow
16 FORGET requests.  This will make sure FORGETs do not pile up, yet
other requests are also allowed to proceed while the queued FORGETs
are processed.

Reported-by: Terje Malmedal <terje.malmedal@usit.uio.no>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-12-07 20:16:56 +01:00
Miklos Szeredi 0be8557bcd fuse: use release_pages()
Replace iterated page_cache_release() with release_pages(), which is
faster and shorter.

Needs release_pages() to be exported to modules.

Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:17 -07:00
Miklos Szeredi b6777c40c7 fuse: use clear_highpage() and KM_USER0 instead of KM_USER1
Commit 7909b1c640 ("fuse: don't use atomic kmap") removed KM_USER0 usage
from fuse/dev.c.  Switch KM_USER1 uses to KM_USER0 for clarity.  Also
replace open coded clear_highpage().

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:13 -07:00
Jan Beulich 3ecb01df32 use clear_page()/copy_page() in favor of memset()/memcpy() on whole pages
After all that's what they are intended for.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:13 -07:00
Geert Uytterhoeven 0157443c56 fuse: Initialize total_len in fuse_retrieve()
fs/fuse/dev.c:1357: warning: ‘total_len’ may be used uninitialized in this
function

Initialize total_len to zero, else its value will be undefined.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-10-04 10:45:32 +02:00
Miklos Szeredi b9ca67b2dd fuse: fix lock annotations
Sparse doesn't understand lock annotations of the form
__releases(&foo->lock).  Change them to __releases(foo->lock).  Same
for __acquires().

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-09-07 13:42:41 +02:00
Miklos Szeredi 595afaf9e6 fuse: flush background queue on connection close
David Bartly reported that fuse can hang in fuse_get_req_nofail() when
the connection to the filesystem server is no longer active.

If bg_queue is not empty then flush_bg_queue() called from
request_end() can put more requests on to the pending queue.  If this
happens while ending requests on the processing queue then those
background requests will be queued to the pending list and never
ended.

Another problem is that fuse_dev_release() didn't wake up processes
sleeping on blocked_waitq.

Solve this by:

 a) flushing the background queue before calling end_requests() on the
    pending and processing queues

 b) setting blocked = 0 and waking up processes waiting on
    blocked_waitq()

Thanks to David for an excellent bug report.

Reported-by: David Bartley <andareed@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: stable@kernel.org
2010-09-07 13:42:41 +02:00
Miklos Szeredi 2d45ba381a fuse: add retrieve request
Userspace filesystem can request data to be retrieved from the inode's
mapping.  This request is synchronous and the retrieved data is queued
as a new request.  If the write to the fuse device returns an error
then the retrieve request was not completed and a reply will not be
sent.

Only present pages are returned in the retrieve reply.  Retrieving
stops when it finds a non-present page and only data prior to that is
returned.

This request doesn't change the dirty state of pages.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-07-12 14:41:40 +02:00
Miklos Szeredi a1d75f2582 fuse: add store request
Userspace filesystem can request data to be stored in the inode's
mapping.  This request is synchronous and has no reply.  If the write
to the fuse device returns an error then the store request was not
fully completed (but may have updated some pages).

If the stored data overflows the current file size, then the size is
extended, similarly to a write(2) on the filesystem.

Pages which have been completely stored are marked uptodate.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-07-12 14:41:40 +02:00
Miklos Szeredi 7909b1c640 fuse: don't use atomic kmap
Don't use atomic kmap for mapping userspace buffers in device
read/write/splice.

This is necessary because the next patch (adding store notify)
requires that caller of fuse_copy_page() may sleep between
invocations.  The simplest way to ensure this is to change the atomic
kmaps to non-atomic ones.

Thankfully architectures where kmap() is not a no-op are going out of
fashion, so we can ignore the (probably negligible) performance impact
of this change.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-07-12 14:41:40 +02:00
Linus Torvalds 003386fff3 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  mm: export generic_pipe_buf_*() to modules
  fuse: support splice() reading from fuse device
  fuse: allow splice to move pages
  mm: export remove_from_page_cache() to modules
  mm: export lru_cache_add_*() to modules
  fuse: support splice() writing to fuse device
  fuse: get page reference for readpages
  fuse: use get_user_pages_fast()
  fuse: remove unneeded variable
2010-05-30 09:16:14 -07:00
Kay Sievers 578454ff7e driver core: add devname module aliases to allow module on-demand auto-loading
This adds:
  alias: devname:<name>
to some common kernel modules, which will allow the on-demand loading
of the kernel module when the device node is accessed.

Ideally all these modules would be compiled-in, but distros seems too
much in love with their modularization that we need to cover the common
cases with this new facility. It will allow us to remove a bunch of pretty
useless init scripts and modprobes from init scripts.

The static device node aliases will be carried in the module itself. The
program depmod will extract this information to a file in the module directory:
  $ cat /lib/modules/2.6.34-00650-g537b60d-dirty/modules.devname
  # Device nodes to trigger on-demand module loading.
  microcode cpu/microcode c10:184
  fuse fuse c10:229
  ppp_generic ppp c108:0
  tun net/tun c10:200
  dm_mod mapper/control c10:235

Udev will pick up the depmod created file on startup and create all the
static device nodes which the kernel modules specify, so that these modules
get automatically loaded when the device node is accessed:
  $ /sbin/udevd --debug
  ...
  static_dev_create_from_modules: mknod '/dev/cpu/microcode' c10:184
  static_dev_create_from_modules: mknod '/dev/fuse' c10:229
  static_dev_create_from_modules: mknod '/dev/ppp' c108:0
  static_dev_create_from_modules: mknod '/dev/net/tun' c10:200
  static_dev_create_from_modules: mknod '/dev/mapper/control' c10:235
  udev_rules_apply_static_dev_perms: chmod '/dev/net/tun' 0666
  udev_rules_apply_static_dev_perms: chmod '/dev/fuse' 0666

A few device nodes are switched to statically allocated numbers, to allow
the static nodes to work. This might also useful for systems which still run
a plain static /dev, which is completely unsafe to use with any dynamic minor
numbers.

Note:
The devname aliases must be limited to the *common* and *single*instance*
device nodes, like the misc devices, and never be used for conceptually limited
systems like the loop devices, which should rather get fixed properly and get a
control node for losetup to talk to, instead of creating a random number of
device nodes in advance, regardless if they are ever used.

This facility is to hide the mess distros are creating with too modualized
kernels, and just to hide that these modules are not compiled-in, and not to
paper-over broken concepts. Thanks! :)

Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
Cc: Ian Kent <raven@themaw.net>
Signed-Off-By: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-25 15:08:26 -07:00
Miklos Szeredi c3021629a0 fuse: support splice() reading from fuse device
Allow userspace filesystem implementation to use splice() to read from
the fuse device.

The userspace filesystem can now transfer data coming from a WRITE
request to an arbitrary file descriptor (regular file, block device or
socket) without having to go through a userspace buffer.

The semantics of using splice() to read messages are:

 1)  with a single splice() call move the whole message from the fuse
     device to a temporary pipe
 2)  read the header from the pipe and determine the message type
 3a) if message is a WRITE then splice data from pipe to destination
 3b) else read rest of message to userspace buffer

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-05-25 15:06:07 +02:00
Miklos Szeredi ce534fb052 fuse: allow splice to move pages
When splicing buffers to the fuse device with SPLICE_F_MOVE, try to
move pages from the pipe buffer into the page cache.  This allows
populating the fuse filesystem's cache without ever touching the page
contents, i.e. zero copy read capability.

The following steps are performed when trying to move a page into the
page cache:

 - buf->ops->confirm() to make sure the new page is uptodate
 - buf->ops->steal() to try to remove the new page from it's previous place
 - remove_from_page_cache() on the old page
 - add_to_page_cache_locked() on the new page

If any of the above steps fail (non fatally) then the code falls back
to copying the page.  In particular ->steal() will fail if there are
external references (other than the page cache and the pipe buffer) to
the page.

Also since the remove_from_page_cache() + add_to_page_cache_locked()
are non-atomic it is possible that the page cache is repopulated in
between the two and add_to_page_cache_locked() will fail.  This could
be fixed by creating a new atomic replace_page_cache_page() function.

fuse_readpages_end() needed to be reworked so it works even if
page->mapping is NULL for some or all pages which can happen if the
add_to_page_cache_locked() failed.

A number of sanity checks were added to make sure the stolen pages
don't have weird flags set, etc...  These could be moved into generic
splice/steal code.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-05-25 15:06:07 +02:00
Miklos Szeredi dd3bb14f44 fuse: support splice() writing to fuse device
Allow userspace filesystem implementation to use splice() to write to
the fuse device.  The semantics of using splice() are:

 1) buffer the message header and data in a temporary pipe
 2) with a *single* splice() call move the message from the temporary pipe
    to the fuse device

The READ reply message has the most interesting use for this, since
now the data from an arbitrary file descriptor (which could be a
regular file, a block device or a socket) can be tranferred into the
fuse device without having to go through a userspace buffer.  It will
also allow zero copy moving of pages.

One caveat is that the protocol on the fuse device requires the length
of the whole message to be written into the header.  But the length of
the data transferred into the temporary pipe may not be known in
advance.  The current library implementation works around this by
using vmplice to write the header and modifying the header after
splicing the data into the pipe (error handling omitted):

	struct fuse_out_header out;

	iov.iov_base = &out;
	iov.iov_len = sizeof(struct fuse_out_header);
	vmsplice(pip[1], &iov, 1, 0);
	len = splice(input_fd, input_offset, pip[1], NULL, len, 0);
	/* retrospectively modify the header: */
	out.len = len + sizeof(struct fuse_out_header);
	splice(pip[0], NULL, fuse_chan_fd(req->ch), NULL, out.len, flags);

This works since vmsplice only saves a pointer to the data, it does
not copy the data itself.

Since pipes are currently limited to 16 pages and messages need to be
spliced atomically, the length of the data is limited to 15 pages (or
60kB for 4k pages).

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-05-25 15:06:06 +02:00
Miklos Szeredi 1bf94ca73e fuse: use get_user_pages_fast()
Replace uses of get_user_pages() with get_user_pages_fast().  It looks
nicer and should be faster in most cases.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-05-25 15:06:06 +02:00
Fang Wenqi b2d82ee3c8 fuse: fix large stack use
gcc 4.4 warns about:
  fs/fuse/dev.c: In function ‘fuse_notify_inval_entry’:
  fs/fuse/dev.c:925: warning: the frame size of 1060 bytes is larger than 1024 bytes

The problem is we declare two structures and a large array on the stack,
I move the array alway from the stack and allocate memory for it dynamically.

Signed-off-by: Fang Wenqi <antonf@turbolinux.com.cn>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-02-05 12:08:31 +01:00
Miklos Szeredi b21dda438b fuse: cleanup in fuse_notify_inval_...()
Small cleanup in fuse_notify_inval_inode() and
fuse_notify_inval_entry().

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-02-05 12:08:31 +01:00
Linus Torvalds 9eead2a811 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: add fusectl interface to max_background
  fuse: limit user-specified values of max background requests
  fuse: use drop_nlink() instead of direct nlink manipulation
  fuse: document protocol version negotiation
  fuse: make the number of max background requests and congestion threshold tunable
2009-09-18 09:23:03 -07:00
Linus Torvalds 81e4e1ba7e Revert "fuse: Fix build error" as unnecessary
This reverts commit 097041e576.

Trond had a better fix, which is the parent of this one ("Fix compile
error due to congestion_wait() changes")

Requested-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-11 11:22:34 -07:00
Larry Finger 097041e576 fuse: Fix build error
When building v2.6.31-rc2-344-g69ca06c, the following build errors are
found due to missing includes:

 CC [M]  fs/fuse/dev.o
fs/fuse/dev.c: In function ‘request_end’:
fs/fuse/dev.c:289: error: ‘BLK_RW_SYNC’ undeclared (first use in this function)
...
fs/nfs/write.c: In function ‘nfs_set_page_writeback’:
fs/nfs/write.c:207: error: ‘BLK_RW_ASYNC’ undeclared (first use in this function)

Signed-off-by: Larry Finger@lwfinger.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-10 19:09:46 -07:00
Jens Axboe 8aa7e847d8 Fix congestion_wait() sync/async vs read/write confusion
Commit 1faa16d228 accidentally broke
the bdi congestion wait queue logic, causing us to wait on congestion
for WRITE (== 1) when we really wanted BLK_RW_ASYNC (== 0) instead.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-07-10 20:31:53 +02:00
Csaba Henk 7a6d3c8b30 fuse: make the number of max background requests and congestion threshold tunable
The practical values for these limits depend on the design of the
filesystem server so let userspace set them at initialization time.

Signed-off-by: Csaba Henk <csaba@gluster.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2009-07-07 17:28:52 +02:00
John Muir 3b463ae0c6 fuse: invalidation reverse calls
Add notification messages that allow the filesystem to invalidate VFS
caches.

Two notifications are added:

 1) inode invalidation

   - invalidate cached attributes
   - invalidate a range of pages in the page cache (this is optional)

 2) dentry invalidation

   - try to invalidate a subtree in the dentry cache

Care must be taken while accessing the 'struct super_block' for the
mount, as it can go away while an invalidation is in progress.  To
prevent this, introduce a rw-semaphore, that is taken for read during
the invalidation and taken for write in the ->kill_sb callback.

Cc: Csaba Henk <csaba@gluster.com>
Cc: Anand Avati <avati@zresearch.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2009-06-30 20:12:24 +02:00
Csaba Henk b4c458b3a2 fuse: fix return value of fuse_dev_write()
On 64 bit systems -- where sizeof(ssize_t) > sizeof(int) -- the following test
exposes a bug due to a non-careful return of an int or unsigned value:

implement a FUSE filesystem which sends an unsolicited notification to
the kernel with invalid opcode. The respective write to /dev/fuse
will return (1 << 32) - EINVAL with errno == 0 instead of -1 with
errno == EINVAL.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: stable@kernel.org
2009-06-30 20:06:23 +02:00
Tejun Heo 08cbf542bf fuse: export symbols to be used by CUSE
Export the following symbols for CUSE.

fuse_conn_put()
fuse_conn_get()
fuse_conn_kill()
fuse_send_init()
fuse_do_open()
fuse_sync_release()
fuse_direct_io()
fuse_do_ioctl()
fuse_file_poll()
fuse_request_alloc()
fuse_get_req()
fuse_put_request()
fuse_request_send()
fuse_abort_conn()
fuse_dev_release()
fuse_dev_operations

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2009-04-28 16:56:42 +02:00
Tejun Heo a325f9b922 fuse: update fuse_conn_init() and separate out fuse_conn_kill()
Update fuse_conn_init() such that it doesn't take @sb and move bdi
registration into a separate function.  Also separate out
fuse_conn_kill() from fuse_put_super().

These will be used to implement cuse.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2009-04-28 16:56:41 +02:00
Miklos Szeredi f6d47a1761 fuse: fix poll notify
Move fuse_copy_finish() to before calling fuse_notify_poll_wakeup().
This is not a big issue because fuse_notify_poll_wakeup() should be
atomic, but it's cleaner this way, and later uses of notification will
need to be able to finish the copying before performing some actions.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2009-01-26 15:00:59 +01:00
Miklos Szeredi 26c3679101 fuse: destroy bdi on umount
If a fuse filesystem is unmounted but the device file descriptor
remains open and a new mount reuses the old device number, then the
mount fails with EEXIST and the following warning is printed in the
kernel log:

  WARNING: at fs/sysfs/dir.c:462 sysfs_add_one+0x35/0x3d()
  sysfs: duplicate filename '0:15' can not be created

The cause is that the bdi belonging to the fuse filesystem was
destoryed only after the device file was released.  Fix this by
calling bdi_destroy() from fuse_put_super() instead.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: stable@kernel.org
2009-01-26 15:00:59 +01:00
Linus Torvalds 5fec8bdbf9 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: clean up annotations of fc->lock
  fuse: fix sparse warning in ioctl
  fuse: update interface version
  fuse: add fuse_conn->release()
  fuse: separate out fuse_conn_init() from new_conn()
  fuse: add fuse_ prefix to several functions
  fuse: implement poll support
  fuse: implement unsolicited notification
  fuse: add file kernel handle
  fuse: implement ioctl support
  fuse: don't let fuse_req->end() put the base reference
  fuse: move FUSE_MINOR to miscdevice.h
  fuse: style fixes
2009-01-06 17:01:20 -08:00
Harvey Harrison 5d9ec854bf fuse: clean up annotations of fc->lock
Makes the existing annotations match the more common one per line style
and adds a few missing annotations.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2008-12-02 14:49:42 +01:00
Tejun Heo b93f858ab2 fuse: add fuse_ prefix to several functions
Add fuse_ prefix to request_send*() and get_root_inode() as some of
those functions will be exported for CUSE.  With or without CUSE
export, having the function names scoped is a good idea for
debuggability.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2008-11-26 12:03:55 +01:00
Tejun Heo 95668a69a4 fuse: implement poll support
Implement poll support.  Polled files are indexed using kh in a RB
tree rooted at fuse_conn->polled_files.

Client should send FUSE_NOTIFY_POLL notification once after processing
FUSE_POLL which has FUSE_POLL_SCHEDULE_NOTIFY set.  Sending
notification unconditionally after the latest poll or everytime file
content might have changed is inefficient but won't cause malfunction.

fuse_file_poll() can sleep and requires patches from the following
thread which allows f_op->poll() to sleep.

  http://thread.gmane.org/gmane.linux.kernel/726176

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2008-11-26 12:03:55 +01:00
Tejun Heo 8599396b50 fuse: implement unsolicited notification
Clients always used to write only in response to read requests.  To
implement poll efficiently, clients should be able to issue
unsolicited notifications.  This patch implements basic notification
support.

Zero fuse_out_header.unique is now accepted and considered unsolicited
notification and the error field contains notification code.  This
patch doesn't implement any actual notification.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2008-11-26 12:03:55 +01:00
Tejun Heo e9bb09dd6c fuse: don't let fuse_req->end() put the base reference
fuse_req->end() was supposed to be put the base reference but there's
no reason why it should.  It only makes things more complex.  Move it
out of ->end() and make it the responsibility of request_end().

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2008-11-26 12:03:54 +01:00
Miklos Szeredi 1729a16c2c fuse: style fixes
Fix coding style errors reported by checkpatch and others.  Uptdate
copyright date to 2008.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2008-11-26 12:03:54 +01:00
David Howells 2186a71cbc CRED: Wrap task credential accesses in the FUSE filesystem
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.

Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().

Change some task->e?[ug]id to task_e?[ug]id().  In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: fuse-devel@lists.sourceforge.net
Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 10:38:53 +11:00
Al Viro 233e70f422 saner FASYNC handling on file close
As it is, all instances of ->release() for files that have ->fasync()
need to remember to evict file from fasync lists; forgetting that
creates a hole and we actually have a bunch that *does* forget.

So let's keep our lives simple - let __fput() check FASYNC in
file->f_flags and call ->fasync() there if it's been set.  And lose that
crap in ->release() instances - leaving it there is still valid, but we
don't have to bother anymore.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-01 09:49:46 -07:00
Miklos Szeredi 4dbf930ed6 fuse: fix sparse warnings
fs/fuse/dev.c:306:2: warning: context imbalance in 'wait_answer_interruptible' - unexpected unlock
fs/fuse/dev.c:361:2: warning: context imbalance in 'request_wait_answer' - unexpected unlock
fs/fuse/dev.c:1002:4: warning: context imbalance in 'end_io_requests' - unexpected unlock

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:51 -07:00
Miklos Szeredi 3be5a52b30 fuse: support writable mmap
Quoting Linus (3 years ago, FUSE inclusion discussions):

  "User-space filesystems are hard to get right. I'd claim that they
   are almost impossible, unless you limit them somehow (shared
   writable mappings are the nastiest part - if you don't have those,
   you can reasonably limit your problems by limiting the number of
   dirty pages you accept through normal "write()" calls)."

Instead of attempting the impossible, I've just waited for the dirty page
accounting infrastructure to materialize (thanks to Peter Zijlstra and
others).  This nicely solved the biggest problem: limiting the number of pages
used for write caching.

Some small details remained, however, which this largish patch attempts to
address.  It provides a page writeback implementation for fuse, which is
completely safe against VM related deadlocks.  Performance may not be very
good for certain usage patterns, but generally it should be acceptable.

It has been tested extensively with fsx-linux and bash-shared-mapping.

Fuse page writeback design
--------------------------

fuse_writepage() allocates a new temporary page with GFP_NOFS|__GFP_HIGHMEM.
It copies the contents of the original page, and queues a WRITE request to the
userspace filesystem using this temp page.

The writeback is finished instantly from the MM's point of view: the page is
removed from the radix trees, and the PageDirty and PageWriteback flags are
cleared.

For the duration of the actual write, the NR_WRITEBACK_TEMP counter is
incremented.  The per-bdi writeback count is not decremented until the actual
write completes.

On dirtying the page, fuse waits for a previous write to finish before
proceeding.  This makes sure, there can only be one temporary page used at a
time for one cached page.

This approach is wasteful in both memory and CPU bandwidth, so why is this
complication needed?

The basic problem is that there can be no guarantee about the time in which
the userspace filesystem will complete a write.  It may be buggy or even
malicious, and fail to complete WRITE requests.  We don't want unrelated parts
of the system to grind to a halt in such cases.

Also a filesystem may need additional resources (particularly memory) to
complete a WRITE request.  There's a great danger of a deadlock if that
allocation may wait for the writepage to finish.

Currently there are several cases where the kernel can block on page
writeback:

  - allocation order is larger than PAGE_ALLOC_COSTLY_ORDER
  - page migration
  - throttle_vm_writeout (through NR_WRITEBACK)
  - sync(2)

Of course in some cases (fsync, msync) we explicitly want to allow blocking.
So for these cases new code has to be added to fuse, since the VM is not
tracking writeback pages for us any more.

As an extra safetly measure, the maximum dirty ratio allocated to a single
fuse filesystem is set to 1% by default.  This way one (or several) buggy or
malicious fuse filesystems cannot slow down the rest of the system by hogging
dirty memory.

With appropriate privileges, this limit can be raised through
'/sys/class/bdi/<bdi>/max_ratio'.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:50 -07:00
Miklos Szeredi d12def1bcb fuse: limit queued background requests
Libfuse basically creates a new thread for each new request.  This is fine for
synchronous requests, which are naturally limited.  However background
requests (especially writepage) can cause a thread creation storm.

To avoid this, limit the number of background requests available to userspace.

This is done by introducing another queue for background requests, and a
counter for the number of "active" requests, which are currently available for
userspace.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:13 -08:00
Miklos Szeredi c9c9d7df5f fuse: no ENOENT from fuse device read
Don't return -ENOENT for a read() on the fuse device when the request was
aborted.  Instead return -ENODEV, meaning the filesystem has been
force-umounted or aborted.

Previously ENOENT meant that the request was interrupted, but now the
'aborted' flag is not set in case of interrupts.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:43:04 -07:00