Commit Graph

18 Commits

Author SHA1 Message Date
Al Viro 37185b3324 um: get rid of pointless include "..." where include <...> will do
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
2012-10-09 22:28:45 +02:00
Al Viro 078073a3d4 um: -include user.h for USER_OBJ, trim includes
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
2011-11-02 14:14:44 +01:00
Jeff Dike 43f5b3085f uml: fix build when SLOB is enabled
Reintroduce uml_kmalloc for the benefit of UML libc code.  The
previous tactic of declaring __kmalloc so it could be called directly
from the libc side of the house turned out to be getting too intimate
with slab, and it doesn't work with slob.

So, the uml_kmalloc wrapper is back.  It calls kmalloc or whatever
that translates into, and libc code calls it.

kfree is left alone since that still works, leaving a somewhat
inconsistent API.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-13 08:02:22 -07:00
Jeff Dike b53f35a809 uml: network driver MTU cleanups
A bunch of MTU-related cleanups in the network code.

First, there is the addition of the notion of a maximally-sized packet, which
is the MTU plus headers.  This is used to size the skb that will receive a
packet.  This allows ether_adjust_skb to go away, as it was used to resize the
skb after it was allocated.

Since the skb passed into the low-level read routine is no longer resized, and
possibly reallocated, there, they (and the write routines) don't need to get
an sk_buff **.  They just need the sk_buff * now.  The callers of
ether_adjust_skb still need to do the skb_put, so that's now inlined.

The MAX_PACKET definitions in most of the drivers are gone.

The set_mtu methods were all the same and did nothing, so they can be
removed.

The ethertap driver had a typo which doubled the size of the packet rather
than adding two bytes to it.  It also wasn't defining its setup_size, causing
a zero-byte kmalloc and crash when the invalid pointer returned from kmalloc
was dereferenced.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:08 -07:00
Jeff Dike cd1ae0e49b uml: network formatting
Style and other non-functional changes in the UML networking code, including
	include tidying
	style violations
	copyright updates
	printks getting severities
	userspace code calling libc directly rather than using the os_*
wrappers

There's also a exit path cleanup in the pcap driver.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:08 -07:00
Jeff Dike e4c4bf9968 uml: Eliminate kernel allocator wrappers
UML had two wrapper procedures for kmalloc, um_kmalloc and um_kmalloc_atomic
because the flag constants weren't available in userspace code.
kern_constants.h had made kernel constants available for a long time, so there
is no need for these wrappers any more.  Rather, userspace code calls kmalloc
directly with the userspace versions of the gfp flags.

kmalloc isn't a real procedure, so I had to essentially copy the inline
wrapper around __kmalloc.

vmalloc also had its own wrapper for no good reason.  This is now gone.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:38 -07:00
Jeff Dike a6ea4cceed uml: rename os_{read_write}_file_k back to os_{read_write}_file
Rename os_{read_write}_file_k back to os_{read_write}_file, delete
the originals and their bogus infrastructure, and fix all the callers.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:13:03 -07:00
Jeff Dike 3d564047a5 uml: start fixing os_read_file and os_write_file
This patch starts the removal of a very old, very broken piece of code.  This
stems from the problem of passing a userspace buffer into read() or write() on
the host.  If that buffer had not yet been faulted in, read and write will
return -EFAULT.

To avoid this problem, the solution was to fault the buffer in before the
system call by touching the pages that hold the buffer by doing a copy-user of
a byte to each page.  This is obviously bogus, but it does usually work, in tt
mode, since the kernel and process are in the same address space and userspace
addresses can be accessed directly in the kernel.

In skas mode, where the kernel and process are in separate address spaces, it
is completely bogus because the userspace address, which is invalid in the
kernel, is passed into the system call instead of the corresponding physical
address, which would be valid.  Here, it appears that this code, on every host
read() or write(), tries to fault in a random process page.  This doesn't seem
to cause any correctness problems, but there is a performance impact.  This
patch, and the ones following, result in a 10-15% performance gain on a kernel
build.

This code can't be immediately tossed out because when it is, you can't log
in.  Apparently, there is some code in the console driver which depends on
this somehow.

However, we can start removing it by switching the code which does I/O using
kernel addresses to using plain read() and write().  This patch introduces
os_read_file_k and os_write_file_k for use with kernel buffers and converts
all call locations which use obvious kernel buffers to use them.  These
include I/O using buffers which are local variables which are on the stack or
kmalloc-ed.  Later patches will handle the less obvious cases, followed by a
mass conversion back to the original interface.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:13:03 -07:00
Jeff Dike 9218b17149 uml: remove user_util.h
user_util.h isn't needed any more, so delete it and remove all includes of it.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:13:01 -07:00
Jeff Dike f34d9d2dcb uml: network interface hotplug error handling
This fixes a number of problems associated with network interface hotplug.

The userspace initialization function can fail in some cases, but the
failure was never passed back to eth_configure, which proceeded with the
configuration.  This results in a zombie device that is present, but can't
work.  This is fixed by allowing the initialization routines to return an
error, which is checked, and the configuration aborted on failure.

eth_configure failed to check for many failures.  Even when it did check,
it didn't undo whatever initializations has already happened, so a present,
but partially initialized and non-working device could result.  It now
checks everything that can fail, and bails out, undoing whatever had been
done.

The return value of eth_configure was always ignored, so it is now just
void.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:13:00 -07:00
Jeff Dike 56bd194bb2 uml: driver formatting fixes
Fix a bunch of formatting violations in the drivers:
	return(n) -> return n
	whitespace fixes
	emacs formatting comment removal
	breaking if(foo) return(n) into two lines

There are also a couple of errno use bugs:
	using errno in a printk when the failure put errno into a local variable
	saving errno after a printk, which can change it

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:13:00 -07:00
Paolo 'Blaisorblade' Giarrusso de7b37cd01 [PATCH] um: fix errno usage
Avoid reusing userspace errno twice - it can be cleared by libc code
everywhere (in particular printk() does clear it in my setup).

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-08 07:38:21 -08:00
Paolo 'Blaisorblade' Giarrusso c13e569073 [PATCH] uml: split memory allocation prototypes out of user.h
user.h is too generic a header name.  I've split out allocation routines from
it.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-20 10:26:36 -07:00
Jeff Dike 5e7672ec3f [PATCH] uml: const more data
Make lots of structures const in order to make it obvious that they need no
locking.

Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 08:26:15 -07:00
Paolo 'Blaisorblade' Giarrusso c42791b6ec [PATCH] uml: make daemon transport behave properly
Avoid uninitialized data in the daemon_data structure.  I used this transport
before doing proper setup before-hand, and I got some very nice SLAB
corruption due to freeing crap pointers.  So just make sure to clear
everything when appropriate.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18 19:20:20 -08:00
Paolo 'Blaisorblade' Giarrusso ba260e23ef [PATCH] uml: fix daemon transport exit path bug
Fix some exit path bugs in the daemon driver.

Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Acked-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-13 18:14:15 -08:00
Jesper Juhl 41f2148a67 [PATCH] uml: kfree cleanup
Here's a small patch to remove a few unnessesary NULL pointer checks before
kfree() in arch/um/drivers/daemon_user.c

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 16:24:35 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00