Commit Graph

27 Commits

Author SHA1 Message Date
Sage Weil e77dc3e9c0 ceph: only queue capsnap if caps are dirty
We used to go into this branch if i_wrbuffer_ref_head was non-zero.  This
was an ancient check from before we were careful about dealing with all
kinds of caps (and not just dirty pages).  It is cleaner to only queue a
capsnap if there is an actual dirty cap.  If we are racing with...
something...we will end up here with ci->i_wrbuffer_refs but no dirty
caps.

Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26 11:26:41 -07:00
Sage Weil af0ed569d7 ceph: fix snap writeback when racing with writes
There are two problems that come up when we try to queue a capsnap while a
write is in progress:

 - The FILE_WR cap is held, but not yet dirty, so we may queue a capsnap
   with dirty == 0.  That will crash later in __ceph_flush_snaps().  Or
   on the FILE_WR cap if a write is in progress.
 - We may not have i_head_snapc set, which causes problems pretty quickly.
   Look to the snaprealm in this case.

Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26 11:26:31 -07:00
Sage Weil 70b666c3b4 ceph: use ihold when we already have an inode ref
We should use ihold whenever we already have a stable inode ref, even
when we aren't holding i_lock.  This avoids adding new and unnecessary
locking dependencies.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-06-07 21:34:11 -07:00
Henry C Chang a26a185d27 ceph: fix list_add in ceph_put_snap_realm
Signed-off-by: Henry C Chang <henry.cy.chang@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-11 10:44:36 -07:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Dave Chinner 0444d76ae6 fs: don't use igrab() while holding i_lock
Fix the incorrect use of igrab() inside the i_lock in NFS and Ceph‥

If we are already holding the i_lock, we have a reference to the
inode so we can safely use ihold() to gain an extra reference. This
avoids hangs due to lock recursion on the i_lock now that the
inode_lock is gone and igrab() uses the i_lock itself.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-29 07:50:34 -07:00
Sage Weil e8e1ba96b2 ceph: queue cap_snaps once per realm
We were forming a dirty list, and then queueing cap_snaps for each realm
_and_ its children, regardless of whether the children were already in the
dirty list.  This meant we did it twice for some realms.  Which in turn
meant we corrupted mdsc->snap_flush_list when the cap_snap was re-added to
the list it was already on, and could trigger an infinite loop.

We were also using recursion to do reach all the children, a no-no when
stack is limited.

Instead, (re)queue any children on the dirty list, avoiding processing
anything twice and avoiding any recursion.

Signed-off-by: Sage Weil <sage@newdream.net>
2011-02-04 20:45:58 -08:00
Yehuda Sadeh 3d14c5d2b6 ceph: factor out libceph from Ceph file system
This factors out protocol and low-level storage parts of ceph into a
separate libceph module living in net/ceph and include/linux/ceph.  This
is mostly a matter of moving files around.  However, a few key pieces
of the interface change as well:

 - ceph_client becomes ceph_fs_client and ceph_client, where the latter
   captures the mon and osd clients, and the fs_client gets the mds client
   and file system specific pieces.
 - Mount option parsing and debugfs setup is correspondingly broken into
   two pieces.
 - The mon client gets a generic handler callback for otherwise unknown
   messages (mds map, in this case).
 - The basic supported/required feature bits can be expanded (and are by
   ceph_fs_client).

No functional change, aside from some subtle error handling cases that got
cleaned up in the refactoring process.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-10-20 15:37:28 -07:00
Sage Weil e835124c2b ceph: only send one flushsnap per cap_snap per mds session
Sending multiple flushsnap messages is problematic because we ignore
the response if the tid doesn't match, and the server may only respond to
each one once.  It's also a waste.

So, skip cap_snaps that are already on the flushing list, unless the caller
tells us to resend (because we are reconnecting).

Signed-off-by: Sage Weil <sage@newdream.net>
2010-09-17 08:03:08 -07:00
Sage Weil ae00d4f37f ceph: fix cap_snap and realm split
The cap_snap creation/queueing relies on both the current i_head_snapc
_and_ the i_snap_realm pointers being correct, so that the new cap_snap
can properly reference the old context and the new i_head_snapc can be
updated to reference the new snaprealm's context.  To fix this, we:

 - move inodes completely to the new (split) realm so that i_snap_realm
   is correct, and
 - generate the new snapc's _before_ queueing the cap_snaps in
   ceph_update_snap_trace().

Signed-off-by: Sage Weil <sage@newdream.net>
2010-09-16 16:26:51 -07:00
Sage Weil 8bef9239ee ceph: correctly set 'follows' in flushsnap messages
The 'follows' should match the seq for the snap context for the given snap
cap, which is the context under which we have been dirtying and writing
data and metadata.  The snapshot that _contains_ those updates thus
_follows_ that context's seq #.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-09-14 15:45:44 -07:00
Sage Weil 7d8cb26d7d ceph: maintain i_head_snapc when any caps are dirty, not just for data
We used to use i_head_snapc to keep track of which snapc the current epoch
of dirty data was dirtied under.  It is used by queue_cap_snap to set up
the cap_snap.  However, since we queue cap snaps for any dirty caps, not
just for dirty file data, we need to keep a valid i_head_snapc anytime
we have dirty|flushing caps.  This fixes a NULL pointer deref in
queue_cap_snap when writing back dirty caps without data (e.g.,
snaptest-authwb.sh).

Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-24 16:24:18 -07:00
Sage Weil ed32604448 ceph: queue cap snap writeback for realm children on snap update
When a realm is updated, we need to queue writeback on inodes in that
realm _and_ its children.  Otherwise, if the inode gets cowed on the
server, we can get a hang later due to out-of-sync cap/snap state.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-22 15:16:47 -07:00
Sage Weil 4a625be472 ceph: include dirty xattrs state in snapped caps
When we snapshot dirty metadata that needs to be written back to the MDS,
include dirty xattr metadata.  Make the capsnap reference the encoded
xattr blob so that it will be written back in the FLUSHSNAP op.

Also fix the capsnap creation guard to include dirty auth or file bits,
not just tests specific to dirty file data or file writes in progress
(this fixes auth metadata writeback).

Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-22 15:16:46 -07:00
Cheng Renquan 640ef79d27 ceph: use ceph_sb_to_client instead of ceph_client
ceph_sb_to_client and ceph_client are really identical, we need to dump
one; while function ceph_client is confusing with "struct ceph_client",
ceph_sb_to_client's definition is more clear; so we'd better switch all
call to ceph_sb_to_client.

  -static inline struct ceph_client *ceph_client(struct super_block *sb)
  -{
  -	return sb->s_fs_info;
  -}

Signed-off-by: Cheng Renquan <crquan@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-17 15:25:17 -07:00
Sage Weil 91dee39eeb ceph: fix snap realm splits
The snap realm split was checking i_snap_realm, not the list_head, to
determine if an inode belonged in the new realm.  The check always failed,
which meant we always moved the inode, corrupting the old realm's list and
causing various crashes.

Also wait to release old realm reference to avoid possibility of use after
free.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-03 10:49:23 -07:00
Linus Torvalds 96e35b40c0 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: use separate class for ceph sockets' sk_lock
  ceph: reserve one more caps space when doing readdir
  ceph: queue_cap_snap should always queue dirty context
  ceph: fix dentry reference leak in dcache readdir
  ceph: decode v5 of osdmap (pool names) [protocol change]
  ceph: fix ack counter reset on connection reset
  ceph: fix leaked inode ref due to snap metadata writeback race
  ceph: fix snap context reference leaks
  ceph: allow writeback of snapped pages older than 'oldest' snapc
  ceph: fix dentry rehashing on virtual .snap dir
2010-04-14 18:45:31 -07:00
Sage Weil fc837c8f04 ceph: queue_cap_snap should always queue dirty context
This simplifies the calling convention, and fixes a bug where we queue a
capsnap with a context other than i_head_snapc (the one that matches the
dirty pages).  The result was a BUG at fs/ceph/caps.c:2178 on writeback
completion when a capsnap matching the writeback snapc could not be found.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-13 12:28:31 -07:00
Sage Weil 819ccbfa44 ceph: fix leaked inode ref due to snap metadata writeback race
We create a ceph_cap_snap if there is dirty cap metadata (for writeback to
mds) OR dirty pages (for writeback to osd).  It is thus possible that the
metadata has been written back to the MDS but the OSD data has not when
the cap_snap is created.  This results in a cap_snap with dirty(caps) == 0.
The problem is that cap writeback to the MDS isn't necessary, and a
FLUSHSNAP cap op gets no ack from the MDS.  This leaves the cap_snap
attached to the inode along with its inode reference.

Fix the problem by dropping the cap_snap if it becomes 'complete' (all
pages written out) and dirty(caps) == 0 in ceph_put_wrbuffer_cap_refs().

Also, BUG() in __ceph_flush_snaps() if we encounter a cap_snap with
dirty(caps) == 0.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-01 09:34:38 -07:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Sage Weil ec4318bcb4 ceph: fix snap rebuild condition
We were rebuilding the snap context when it was not necessary
(i.e. when the realm seq hadn't changed _and_ the parent seq
was still older), which caused page snapc pointers to not match
the realm's snapc pointer (even though the snap context itself
was identical).  This confused begin_write and put it into an
endless loop.

The correct logic is: rebuild snapc if _my_ realm seq changed, or
if my parent realm's seq is newer than mine (and thus mine needs
to be rebuilt too).

Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-23 07:47:02 -07:00
Sage Weil 052bb34af3 ceph: add missing locking to protect i_snap_realm_item during split
All ci->i_snap_realm_item/realm->inodes_with_caps manipulation should be
protected by realm->inodes_with_caps_lock.  This bug would have only bit
us in a rare race with a realm split (during some snap creations).

Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-20 21:33:07 -07:00
Sage Weil 2600d2dd50 ceph: drop messages on unregistered mds sessions; cleanup
Verify the mds session is currently registered before handling
incoming messages.  Clean up message handlers to pull mds out
of session->s_mds instead of less trustworthy src field.

Clean up con_{get,put} debug output.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-23 14:26:35 -08:00
Sage Weil a105f00cf1 ceph: use rbtree for snap_realms
Switch from radix tree to rbtree for snap realms.  This is much more
appropriate given that realm keys are few and far between.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-16 22:01:09 -08:00
Sage Weil 9ec7cab14e ceph: hex dump corrupt server data to KERN_DEBUG
Also, print fsid using standard format, NOT hex dump.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-12-21 16:39:52 -08:00
Sage Weil 75eb359281 ceph: remove useless IS_ERR checks
ceph_lookup_snap_realm either returns a valid pointer or NULL; there is no
need to check IS_ERR(result).

Reported-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Sage Weil <sage@newdream.net>
2009-11-21 13:08:14 -08:00
Sage Weil 963b61eb04 ceph: snapshot management
Ceph snapshots rely on client cooperation in determining which
operations apply to which snapshots, and appropriately flushing
snapshotted data and metadata back to the OSD and MDS clusters.
Because snapshots apply to subtrees of the file hierarchy and can be
created at any time, there is a fair bit of bookkeeping required to
make this work.

Portions of the hierarchy that belong to the same set of snapshots
are described by a single 'snap realm.'  A 'snap context' describes
the set of snapshots that exist for a given file or directory.

Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-06 11:31:12 -07:00