Commit Graph

25 Commits

Author SHA1 Message Date
Bartlomiej Zolnierkiewicz 0380dad45e it821x: RAID mode fixes
The DMA support for RAID mode broke after:

	commit 71ef51cc17
	Author: Jens Axboe <axboe@suse.de>
	Date:   Fri Jul 28 09:02:17 2006 +0200

	    [PATCH] it821x: fix ide dma setup bug

	    Only enable dma for a valid speed setting.

	    Signed-off-by: Jens Axboe <axboe@suse.de>

	commit 0a8348d086
	Author: Jens Axboe <axboe@suse.de>
	Date:   Fri Jul 28 08:58:26 2006 +0200

	    [PATCH] ide: if the id fields looks screwy, disable DMA

	    It's the safer choice. Originally due to a bug in itx821x, but a
	    generally sound thing to do.

	    Signed-off-by: Jens Axboe <axboe@suse.de>

However it worked by pure luck before Jens' fixes: bogus ide_dma_enable()
usage in it821x driver combined with loosy check in ide_dma_verbose() allowed
the hardware to operate in DMA mode.  When these problems were fixed the DMA
support broke...

The source root for the regression turned out to be that the it821x.c code
was clearing too much of id->field_valid.  The IDE core code was using the
original value of id->field_valid to do the tuning but later DMA got disabled
in ide_dma_verbose() because of the incorrect id->field_valid fixup.  Fix it.

While at it:

* Do fixup() after probing the drives but before tuning them (which is also
  OK w.r.t. ide_undecoded_slave() fixup).  This change fixes device IDENTIFY
  data to be consistent before/after the tuning and allows us to remove extra
  re-tuning of drives from it821x_fixups().

* Fake MWDMA0 enabled/supported bits in IDENTIFY data if the device has
  DMA capable bit set (this is just to tell the IDE core that DMA is
  supported since it821x firmware takes care of DMA mode programming).

* Don't touch timing registers and don't program transfer modes on devices
  et all when in RAID mode - depend solely on firmware to do the tuning
  (as suggested by Alan Cox and done in libata pata_it821x driver).

Thanks for testing the patch goes out to Thomas Kuther.

Cc: Thomas Kuther <gimpel@sonnenkinder.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-06-08 15:14:29 +02:00
Bartlomiej Zolnierkiewicz 5cbf79cdb3 ide: add ide_proc_register_port()
* create_proc_ide_interfaces() tries to add /proc entries for every probed
  and initialized IDE port, replace it by ide_proc_register_port() which does
  it only for the given port (also rename destroy_proc_ide_interface() to
  ide_proc_unregister_port() for consistency)
  
* convert {create,destroy}_proc_ide_interface[s]() users to use new functions

* pmac driver depended on proc_ide_create() to add /proc port entries, fix it
  
* au1xxx-ide, swarm and cs5520 drivers depended indirectly on ide-generic
  driver (CONFIG_IDE_GENERIC=y) to add port /proc entries, fix them

* there is now no need to add /proc entries for IDE ports in proc_ide_create()
  so don't do it

* proc_ide_create() needs now to be called before drivers are probed - fix it,
  while at it make proc_ide_create() create /proc "ide" directory

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-10 00:01:11 +02:00
Alan Cox 846c11abc7 ide: remove a ton of pointless #undef REALLY_SLOW_IO
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-03-03 17:48:54 +01:00
Bartlomiej Zolnierkiewicz 7469aaf6a3 ide: make ide_hwif_t.ide_dma_{host_off,off_quietly} void (v2)
* since ide_hwif_t.ide_dma_{host_off,off_quietly} always return '0'
  make these functions void and while at it drop "ide_" prefix
* fix comment for __ide_dma_off_quietly()
* make __ide_dma_{host_off,off_quietly,off}() void and drop "__" prefix

v2:
* while at it rename atiixp_ide_dma_host_off() to atiixp_dma_host_off(),
  sgiioc4_ide_dma_{host_off,off_quietly}() to sgiioc4_dma_{host_off,off_quietly}()
  and sl82c105_ide_dma_off_quietly() to sl82c105_dma_off_quietly()
  [ Noticed by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ]

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-17 02:40:26 +01:00
Bartlomiej Zolnierkiewicz 3608b5d71a ide: add ide_set_dma() helper (v2)
* add ide_set_dma() helper and make ide_hwif_t.ide_dma_check return
  -1 when DMA needs to be disabled (== need to call ->ide_dma_off_quietly)
   0 when DMA needs to be enabled  (== need to call ->ide_dma_on)
   1 when DMA setting shouldn't be changed
* fix IDE code to use ide_set_dma() instead if using ->ide_dma_check directly

v2:
* updated for scc_pata

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-17 02:40:26 +01:00
Hannes Reinecke e3a59b4d93 ACPI support for IDE devices
This patch implements ACPI integration for generic IDE devices.
The ACPI spec mandates that some methods are called during suspend and
resume. And consequently there most modern Laptops cannot resume
properly without it.

According to the spec, we should call '_GTM' (Get Timing) upon suspend
to store the current IDE adapter settings.
Upon resume we should call '_STM' (Set Timing) to initialize the
adapter with the stored settings; afterwards '_GTF' (Get Taskfile)
should be called which returns a buffer with some IDE initialisation
commands. Those commands should be passed to the drive.

There are two module params which control the behaviour of this patch:

'ide=noacpi'
	Do not call any ACPI methods (Disables any ACPI method calls)
'ide=acpigtf'
	Enable execution of _GTF methods upon resume.
	Has no effect if 'ide=noacpi' is set.
'ide=acpionboot'
	Enable execution of ACPI methods during boot.
	This might be required on some machines if 'ide=acpigtf' is
	selected as some machines modify the _GTF information
	depending on the drive identification passed down with _STM.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-02-07 18:19:37 +01:00
Boaz Harrosh 2b02a17920 [PATCH] remove blk_queue_activity_fn
While working on bidi support at struct request level
I have found that blk_queue_activity_fn is actually never used.
The only user is in ide-probe.c with this code:

	/* enable led activity for disk drives only */
	if (drive->media == ide_disk && hwif->led_act)
		blk_queue_activity_fn(q, hwif->led_act, drive);

And led_act is never initialized anywhere.
(Looking back at older kernels it was used in the PPC arch, but was removed around 2.6.18)
Unless it is all for future use off course.
(this patch is against linux-2.6-block.git as off 2006/12/4)

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2006-12-12 10:22:23 +01:00
Randy Dunlap 349ae23fe7 [PATCH] IDE core: driver layer error checking
Check driver layer return values in IDE core.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:08 -07:00
Thomas Gleixner 362537b9ab [PATCH] irq-flags: ide: Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:49 -07:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Greg Kroah-Hartman 94f6c59dcf [PATCH] devfs: Remove devfs support from the ide subsystem.
Also removes the ide drive devfs_name field as it's no longer needed

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26 12:25:06 -07:00
David S. Miller c6387a48cf [SPARC]: Kill __irq_itoa().
This ugly hack was long overdue to die.

It was a way to print out Sparc interrupts in a more freindly format,
since IRQ numbers were arbitrary opaque 32-bit integers which vectored
into PIL levels.  These 32-bit integers were not necessarily in the
0-->NR_IRQS range, but the PILs they vectored to were.

The idea now is that we will increase NR_IRQS a little bit and use a
virtual<-->real IRQ number mapping scheme similar to PowerPC.

That makes this IRQ printing hack irrelevant, and furthermore only a
handful of drivers actually used __irq_itoa() making it even less
useful.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-20 01:21:29 -07:00
Kumar Gala 208a08f7cc [PATCH] ide: Allow IDE interface to specify its not capable of 32-bit operations
In some embedded systems the IDE hardware interface may only support 16-bit
or smaller accesses.  Allow the interface to specify if this is the case
and don't allow the drive or user to override the setting.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 07:33:28 -08:00
Richard Purdie 9810933701 [PATCH] stop CompactFlash devices being marked as removable
This patch stops CompactFlash devices being marked as removable.  They are
not removable (as defined by Linux) as the media and device are
inseparable.  When a card is removed, the whole device is removed from the
system and never sits in a media-less state.

This stops some nasty udev device creation/destruction loops.

Further, once this change is made, there is no need for ide to can be
removed from ide_drive_t.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-03 08:32:12 -08:00
Jens Axboe ba027def7b [PATCH] Revert ide softirq handling
There's a problem with the REQ_BLOCK_PC handling as well (bad ->data_len
handling) where it could actually complete a request ahead of time.  I
suggest we just back this out for now, I will resubmit it later when I'm
fully confident in it.

This reverts commit 8672d57138

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 12:00:47 -08:00
Aleksey Makarov f36d4024ca [PATCH] mutex subsystem, semaphore to completion: IDE ->gendev_rel_sem
The patch changes semaphores that are initialized as
locked to complete().

Source: MontaVista Software, Inc.

Modified-by: Steven Rostedt <rostedt@goodmis.org>

The following patch is from Montavista.  I modified it slightly.
Semaphores are currently being used where it makes more sense for
completions.  This patch corrects that.

Signed-off-by: Aleksey Makarov <amakarov@ru.mvista.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2006-01-09 15:59:27 -08:00
Jens Axboe 8672d57138 [IDE] Use the block layer deferred softirq request completion
This patch makes IDE use the new blk_complete_request() interface.
There's still room for improvement, as __ide_end_request() really
could drop the lock after getting HWGROUP->rq (why does it need to
hold it in the first place? If ->rq access isn't serialized, we are
screwed anyways).

Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-09 16:03:35 +01:00
Jesper Juhl 6044ec8882 [PATCH] kfree cleanup: misc remaining drivers
This is the remaining misc drivers/ part of the big kfree cleanup patch.

Remove pointless checks for NULL prior to calling kfree() in misc files in
drivers/.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org>
Acked-by: Roland Dreier <rolandd@cisco.com>
Acked-by: Pierre Ossman <drzeus@drzeus.cx>
Acked-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Len Brown <len.brown@intel.com>
Acked-by: "Antonino A. Daplas" <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:54:05 -08:00
Deepak Saxena f5e3c2faa2 [PATCH] ide: kmalloc + memset -> kzalloc conversion
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:54:00 -08:00
Christoph Lameter 86b3786078 [PATCH] Fix ide-disk.c oops caused by hwif == NULL
1. Move hwif_to_node to ide.h

2. Use hwif_to_node in ide-disk.c

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-09 20:21:31 -07:00
Ravikiran G Thirumalai 556e58febf [PATCH] ide: fix kmalloc_node breakage in ide driver
Patch fixes oops caused by ide interfaces not on pci.  pcibus_to_node
causes the kernel to crash otherwise.  Patch also adds a BUG_ON to check if
hwif is NULL.

Signed-off-by: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-04 13:00:53 -07:00
Christoph Lameter 1946089a10 [PATCH] NUMA aware block device control structure allocation
Patch to allocate the control structures for for ide devices on the node of
the device itself (for NUMA systems).  The patch depends on the Slab API
change patch by Manfred and me (in mm) and the pcidev_to_node patch that I
posted today.

Does some realignment too.

Signed-off-by: Justin M. Forbes <jmforbes@linuxtx.org>
Signed-off-by: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Pravin Shelar <pravin@calsoftinc.com>
Signed-off-by: Shobhit Dayal <shobhit@calsoftinc.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:09 -07:00
Marcello Maggioni 284e423811 [PATCH] timeout at boottime with NEC3500A (and possibly others) when inserted a CD in it
From: Marcello Maggioni <hayarms@gmail.com>

Problem: Some drives (NEC 3500, TDK 1616N, Mad-dog MD-16XDVD9, RICOH
MP5163DA, Memorex DVD9 drive and IO-DATA's too for sure), if a
CD/DVD is inserted into the tray when the system is booted and if
before the OS bootup the BIOS checked for the presence of a bootable
CD/DVD into the drive, during the IDE probe phase the drive may
result busy and remain so for the next 25/30 seconds . This cause the
drive to be skipped during the booting phase and not begin usable
until the next reboot (if the reboot goes well and the drive doesn't
timeout again).

Solution: Rising the timeout time from 10 seconds to 35 seconds
(during these 35 seconds every drive should wake up for sure
according to the tests I've done).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
2005-05-26 15:47:35 +02:00
Bartlomiej Zolnierkiewicz 8604affde9 [PATCH] convert IDE device drivers to driver-model
* add ide_bus_match() and export ide_bus_type
* split ide_remove_driver_from_hwgroup() out of ide_unregister()
* move device cleanup from ide_unregister() to drive_release_dev()
* convert ide_driver_t->name to driver->name
* convert ide_driver_t->{attach,cleanup} to driver->{probe,remove}
* remove ide_driver_t->busy as ide_bus_type->subsys.rwsem
  protects against concurrent ->{probe,remove} calls
* make ide_{un}register_driver() void as it cannot fail now
* use driver_{un}register() directly, remove ide_{un}register_driver()
* use device_register() instead of ata_attach(), remove ata_attach()
* add proc_print_driver() and ide_drivers_show(), remove ide_drivers_op
* fix ide_replace_subdriver() and move it to ide-proc.c
* remove ide_driver_t->drives, ide_drives and drives_lock
* remove ide_driver_t->drivers, drivers and drivers_lock
* remove ide_drive_t->driver and DRIVER() macro

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
2005-05-26 14:55:34 +02:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00