Commit Graph

177 Commits

Author SHA1 Message Date
David Howells 7ceab50c0b VFS: Fix up debugfs to use d_is_dir() in place of S_ISDIR()
Fix up debugfs to use d_is_dir(dentry) in place of
S_ISDIR(dentry->d_inode->i_mode).

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15 15:05:30 -04:00
Greg KH c9e15f25f5 debugfs: allow bad parent pointers to be passed in
If something went wrong with creating a debugfs file/symlink/directory,
that value could be passed down into debugfs again as a parent dentry.
To make caller code simpler, just error out if this happens, and don't
crash the kernel.

Reported-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alex Elder <elder@linaro.org>
2015-04-03 16:30:12 +02:00
Al Viro 0db59e5929 debugfs: leave freeing a symlink body until inode eviction
As it is, we have debugfs_remove() racing with symlink traversals.
Supply ->evict_inode() and do freeing there - inode will remain
pinned until we are done with the symlink body.

And rip the idiocy with checking if dentry is positive right after
we'd verified debugfs_positive(), which is a stronger check...

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-22 11:38:43 -05:00
David Howells e36cb0b89c VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry)
Convert the following where appropriate:

 (1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry).

 (2) S_ISREG(dentry->d_inode) to d_is_reg(dentry).

 (3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry).  This is actually more
     complicated than it appears as some calls should be converted to
     d_can_lookup() instead.  The difference is whether the directory in
     question is a real dir with a ->lookup op or whether it's a fake dir with
     a ->d_automount op.

In some circumstances, we can subsume checks for dentry->d_inode not being
NULL into this, provided we the code isn't in a filesystem that expects
d_inode to be NULL if the dirent really *is* negative (ie. if we're going to
use d_inode() rather than d_backing_inode() to get the inode pointer).

Note that the dentry type field may be set to something other than
DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS
manages the fall-through from a negative dentry to a lower layer.  In such a
case, the dentry type of the negative union dentry is set to the same as the
type of the lower dentry.

However, if you know d_inode is not NULL at the call site, then you can use
the d_is_xxx() functions even in a filesystem.

There is one further complication: a 0,0 chardev dentry may be labelled
DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE.  Strictly, this was
intended for special directory entry types that don't have attached inodes.

The following perl+coccinelle script was used:

use strict;

my @callers;
open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') ||
    die "Can't grep for S_ISDIR and co. callers";
@callers = <$fd>;
close($fd);
unless (@callers) {
    print "No matches\n";
    exit(0);
}

my @cocci = (
    '@@',
    'expression E;',
    '@@',
    '',
    '- S_ISLNK(E->d_inode->i_mode)',
    '+ d_is_symlink(E)',
    '',
    '@@',
    'expression E;',
    '@@',
    '',
    '- S_ISDIR(E->d_inode->i_mode)',
    '+ d_is_dir(E)',
    '',
    '@@',
    'expression E;',
    '@@',
    '',
    '- S_ISREG(E->d_inode->i_mode)',
    '+ d_is_reg(E)' );

my $coccifile = "tmp.sp.cocci";
open($fd, ">$coccifile") || die $coccifile;
print($fd "$_\n") || die $coccifile foreach (@cocci);
close($fd);

foreach my $file (@callers) {
    chomp $file;
    print "Processing ", $file, "\n";
    system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 ||
	die "spatch failed";
}

[AV: overlayfs parts skipped]

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-22 11:38:41 -05:00
David Howells e59b4e9187 debugfs: Provide a file creation function that also takes an initial size
Provide a file creation function that also takes an initial size so that the
caller doesn't have to set i_size, thus meaning that we don't have to call
deal with ->d_inode in the callers.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-17 12:21:51 -05:00
Al Viro 77b3da6e32 new primitive: debugfs_create_automount()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-25 16:52:53 -05:00
Al Viro 5233e31191 debugfs: split end_creating() into success and failure cases
... and don't bother with dput(dentry) in the former and with
dget(dentry) preceding all its calls.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-25 16:52:53 -05:00
Al Viro edac65eaf8 debugfs: take mode-dependent parts of debugfs_get_inode() into callers
... and trim the arguments list

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-25 16:52:53 -05:00
Al Viro 680b302409 fold debugfs_mknod() into callers
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-25 16:52:52 -05:00
Al Viro 3473cde565 fold debugfs_create() into caller
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-25 16:52:52 -05:00
Al Viro 02538a75ba fold debugfs_mkdir() into caller
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-25 16:52:51 -05:00
Al Viro 160f7592f2 debugfs_mknod(): get rid useless arguments
dev is always zero, dir was only used to get its ->i_sb, which is
equal to ->d_sb of dentry...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-25 16:52:51 -05:00
Al Viro 9b73fab01b fold debugfs_link() into caller
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-25 16:52:50 -05:00
Al Viro ad5abd5ba8 debugfs: kill __create_file()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-25 16:52:31 -05:00
Al Viro 190afd81e4 debugfs: split the beginning and the end of __create_file() off
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-25 15:23:31 -05:00
Al Viro e09ddf36dd debugfs_{mkdir,create,link}(): get rid of redundant argument
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-25 15:23:31 -05:00
Linus Torvalds e6b5be2be4 Driver core patches for 3.19-rc1
Here's the set of driver core patches for 3.19-rc1.
 
 They are dominated by the removal of the .owner field in platform
 drivers.  They touch a lot of files, but they are "simple" changes, just
 removing a line in a structure.
 
 Other than that, a few minor driver core and debugfs changes.  There are
 some ath9k patches coming in through this tree that have been acked by
 the wireless maintainers as they relied on the debugfs changes.
 
 Everything has been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSOD20ACgkQMUfUDdst+ylLPACg2QrW1oHhdTMT9WI8jihlHVRM
 53kAoLeteByQ3iVwWurwwseRPiWa8+MI
 =OVRS
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core update from Greg KH:
 "Here's the set of driver core patches for 3.19-rc1.

  They are dominated by the removal of the .owner field in platform
  drivers.  They touch a lot of files, but they are "simple" changes,
  just removing a line in a structure.

  Other than that, a few minor driver core and debugfs changes.  There
  are some ath9k patches coming in through this tree that have been
  acked by the wireless maintainers as they relied on the debugfs
  changes.

  Everything has been in linux-next for a while"

* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
  Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
  fs: debugfs: add forward declaration for struct device type
  firmware class: Deletion of an unnecessary check before the function call "vunmap"
  firmware loader: fix hung task warning dump
  devcoredump: provide a one-way disable function
  device: Add dev_<level>_once variants
  ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
  ath: use seq_file api for ath9k debugfs files
  debugfs: add helper function to create device related seq_file
  drivers/base: cacheinfo: remove noisy error boot message
  Revert "core: platform: add warning if driver has no owner"
  drivers: base: support cpu cache information interface to userspace via sysfs
  drivers: base: add cpu_device_create to support per-cpu devices
  topology: replace custom attribute macros with standard DEVICE_ATTR*
  cpumask: factor out show_cpumap into separate helper function
  driver core: Fix unbalanced device reference in drivers_probe
  driver core: fix race with userland in device_add()
  sysfs/kernfs: make read requests on pre-alloc files use the buffer.
  sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
  fs: sysfs: return EGBIG on write if offset is larger than file size
  ...
2014-12-14 16:10:09 -08:00
Arend van Spriel 98210b7f73 debugfs: add helper function to create device related seq_file
This patch adds a helper function that simplifies adding a
so-called single_open sequence file for device drivers. The
calling device driver needs to provide a read function and
a device pointer. The field struct seq_file::private will
reference the device pointer upon call to the read function
so the driver can obtain his data from it and do its task
of providing the file content using seq_printf() calls and
alike. Using this helper function also gets rid of the need
to specify file operations per debugfs file.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26 19:38:37 -08:00
Al Viro 8ce74dd605 Merge tag 'trace-seq-file-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into for-next
Pull the beginning of seq_file cleanup from Steven:
  "I'm looking to clean up the seq_file code and to eventually merge the
  trace_seq code with seq_file as well, since they basically do the same thing.

  Part of this process is to remove the return code of seq_printf() and friends
  as they are rather inconsistent. It is better to use the new function
  seq_has_overflowed() if you want to stop processing when the buffer
  is full. Note, if the buffer is full, the seq_file code will throw away
  the contents, allocate a bigger buffer, and then call your code again
  to fill in the data. The only thing that breaking out of the function
  early does is to save a little time which is probably never noticed.

  I started with patches from Joe Perches and modified them as well.
  There's many more places that need to be updated before we can convert
  seq_printf() and friends to return void. But this patch set introduces
  the seq_has_overflowed() and does some initial updates."
2014-11-19 13:02:53 -05:00
Joe Perches 9761536e1d debugfs: Have debugfs_print_regs32() return void
The seq_printf() will soon just return void, and seq_has_overflowed()
should be used instead to see if the seq can no longer accept input.

As the return value of debugfs_print_regs32() has no users and
the seq_file descriptor should be checked with seq_has_overflowed()
instead of return values of functions, it is better to just have
debugfs_print_regs32() also return void.

Link: http://lkml.kernel.org/p/2634b19eb1c04a9d31148c1fe6f1f3819be95349.1412031505.git.joe@perches.com

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joe Perches <joe@perches.com>
[ original change only updated seq_printf() return, added return of
  void to debugfs_print_regs32() as well ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-05 14:13:38 -05:00
Al Viro 946e51f2bf move d_rcu from overlapping d_child to overlapping d_alias
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-03 15:20:29 -05:00
Rahul Bedarkar 88e412ea5e fs: debugfs: remove trailing whitespace
fixes checkpatch.pl trailing whitespace errors

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09 16:58:21 -07:00
Steven Rostedt 485d44022a debugfs: Fix corrupted loop in debugfs_remove_recursive
[ I'm currently running my tests on it now, and so far, after a few
 hours it has yet to blow up. I'll run it for 24 hours which it never
 succeeded in the past. ]

The tracing code has a way to make directories within the debugfs file
system as well as deleting them using mkdir/rmdir in the instance
directory. This is very limited in functionality, such as there is
no renames, and the parent directory "instance" can not be modified.
The tracing code creates the instance directory from the debugfs code
and then replaces the dentry->d_inode->i_op with its own to allow
for mkdir/rmdir to work.

When these are called, the d_entry and inode locks need to be released
to call the instance creation and deletion code. That code has its own
accounting and locking to serialize everything to prevent multiple
users from causing harm. As the parent "instance" directory can not
be modified this simplifies things.

I created a stress test that creates several threads that randomly
creates and deletes directories thousands of times a second. The code
stood up to this test and I submitted it a while ago.

Recently I added a new test that adds readers to the mix. While the
instance directories were being added and deleted, readers would read
from these directories and even enable tracing within them. This test
was able to trigger a bug:

 general protection fault: 0000 [#1] PREEMPT SMP
 Modules linked in: ...
 CPU: 3 PID: 17789 Comm: rmdir Tainted: G        W     3.15.0-rc2-test+ #41
 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
 task: ffff88003786ca60 ti: ffff880077018000 task.ti: ffff880077018000
 RIP: 0010:[<ffffffff811ed5eb>]  [<ffffffff811ed5eb>] debugfs_remove_recursive+0x1bd/0x367
 RSP: 0018:ffff880077019df8  EFLAGS: 00010246
 RAX: 0000000000000002 RBX: ffff88006f0fe490 RCX: 0000000000000000
 RDX: dead000000100058 RSI: 0000000000000246 RDI: ffff88003786d454
 RBP: ffff88006f0fe640 R08: 0000000000000628 R09: 0000000000000000
 R10: 0000000000000628 R11: ffff8800795110a0 R12: ffff88006f0fe640
 R13: ffff88006f0fe640 R14: ffffffff81817d0b R15: ffffffff818188b7
 FS:  00007ff13ae24700(0000) GS:ffff88007d580000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: 0000003054ec7be0 CR3: 0000000076d51000 CR4: 00000000000007e0
 Stack:
  ffff88007a41ebe0 dead000000100058 00000000fffffffe ffff88006f0fe640
  0000000000000000 ffff88006f0fe678 ffff88007a41ebe0 ffff88003793a000
  00000000fffffffe ffffffff810bde82 ffff88006f0fe640 ffff88007a41eb28
 Call Trace:
  [<ffffffff810bde82>] ? instance_rmdir+0x15b/0x1de
  [<ffffffff81132e2d>] ? vfs_rmdir+0x80/0xd3
  [<ffffffff81132f51>] ? do_rmdir+0xd1/0x139
  [<ffffffff8124ad9e>] ? trace_hardirqs_on_thunk+0x3a/0x3c
  [<ffffffff814fea62>] ? system_call_fastpath+0x16/0x1b
 Code: fe ff ff 48 8d 75 30 48 89 df e8 c9 fd ff ff 85 c0 75 13 48 c7 c6 b8 cc d2 81 48 c7 c7 b0 cc d2 81 e8 8c 7a f5 ff 48 8b 54 24 08 <48> 8b 82 a8 00 00 00 48 89 d3 48 2d a8 00 00 00 48 89 44 24 08
 RIP  [<ffffffff811ed5eb>] debugfs_remove_recursive+0x1bd/0x367
  RSP <ffff880077019df8>

It took a while, but every time it triggered, it was always in the
same place:

	list_for_each_entry_safe(child, next, &parent->d_subdirs, d_u.d_child) {

Where the child->d_u.d_child seemed to be corrupted.  I added lots of
trace_printk()s to see what was wrong, and sure enough, it was always
the child's d_u.d_child field. I looked around to see what touches
it and noticed that in __dentry_kill() which calls dentry_free():

static void dentry_free(struct dentry *dentry)
{
	/* if dentry was never visible to RCU, immediate free is OK */
	if (!(dentry->d_flags & DCACHE_RCUACCESS))
		__d_free(&dentry->d_u.d_rcu);
	else
		call_rcu(&dentry->d_u.d_rcu, __d_free);
}

I also noticed that __dentry_kill() unlinks the child->d_u.child
under the parent->d_lock spin_lock.

Looking back at the loop in debugfs_remove_recursive() it never takes the
parent->d_lock to do the list walk. Adding more tracing, I was able to
prove this was the issue:

 ftrace-t-15385   1.... 246662024us : dentry_kill <ffffffff81138b91>: free ffff88006d573600
    rmdir-15409   2.... 246662024us : debugfs_remove_recursive <ffffffff811ec7e5>: child=ffff88006d573600 next=dead000000100058

The dentry_kill freed ffff88006d573600 just as the remove recursive was walking
it.

In order to fix this, the list walk needs to be modified a bit to take
the parent->d_lock. The safe version is no longer necessary, as every
time we remove a child, the parent->d_lock must be released and the
list walk must start over. Each time a child is removed, even though it
may still be on the list, it should be skipped by the first check
in the loop:

		if (!debugfs_positive(child))
			continue;

Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09 16:37:29 -07:00
Linus Torvalds 24e7ea3bea Major changes for 3.14 include support for the newly added ZERO_RANGE
and COLLAPSE_RANGE fallocate operations, and scalability improvements
 in the jbd2 layer and in xattr handling when the extended attributes
 spill over into an external block.
 
 Other than that, the usual clean ups and minor bug fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJTPbD2AAoJENNvdpvBGATwDmUQANSfGYIQazB8XKKgtNTMiG/Y
 Ky7n1JzN9lTX/6nMsqQnbfCweLRmxqpWUBuyKDRHUi8IG0/voXSTFsAOOgz0R15A
 ERRRWkVvHixLpohuL/iBdEMFHwNZYPGr3jkm0EIgzhtXNgk5DNmiuMwvHmCY27kI
 kdNZIw9fip/WRNoFLDBGnLGC37aanoHhCIbVlySy5o9LN1pkC8BgXAYV0Rk19SVd
 bWCudSJEirFEqWS5H8vsBAEm/ioxTjwnNL8tX8qms6orZ6h8yMLFkHoIGWPw3Q15
 a0TSUoMyav50Yr59QaDeWx9uaPQVeK41wiYFI2rZOnyG2ts0u0YXs/nLwJqTovgs
 rzvbdl6cd3Nj++rPi97MTA7iXK96WQPjsDJoeeEgnB0d/qPyTk6mLKgftzLTNgSa
 ZmWjrB19kr6CMbebMC4L6eqJ8Fr66pCT8c/iue8wc4MUHi7FwHKH64fqWvzp2YT/
 +165dqqo2JnUv7tIp6sUi1geun+bmDHLZFXgFa7fNYFtcU3I+uY1mRr3eMVAJndA
 2d6ASe/KhQbpVnjKJdQ8/b833ZS3p+zkgVPrd68bBr3t7gUmX91wk+p1ct6rUPLr
 700F+q/pQWL8ap0pU9Ht/h3gEJIfmRzTwxlOeYyOwDseqKuS87PSB3BzV3dDunSU
 DrPKlXwIgva7zq5/S0Vr
 =4s1Z
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "Major changes for 3.14 include support for the newly added ZERO_RANGE
  and COLLAPSE_RANGE fallocate operations, and scalability improvements
  in the jbd2 layer and in xattr handling when the extended attributes
  spill over into an external block.

  Other than that, the usual clean ups and minor bug fixes"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (42 commits)
  ext4: fix premature freeing of partial clusters split across leaf blocks
  ext4: remove unneeded test of ret variable
  ext4: fix comment typo
  ext4: make ext4_block_zero_page_range static
  ext4: atomically set inode->i_flags in ext4_set_inode_flags()
  ext4: optimize Hurd tests when reading/writing inodes
  ext4: kill i_version support for Hurd-castrated file systems
  ext4: each filesystem creates and uses its own mb_cache
  fs/mbcache.c: doucple the locking of local from global data
  fs/mbcache.c: change block and index hash chain to hlist_bl_node
  ext4: Introduce FALLOC_FL_ZERO_RANGE flag for fallocate
  ext4: refactor ext4_fallocate code
  ext4: Update inode i_size after the preallocation
  ext4: fix partial cluster handling for bigalloc file systems
  ext4: delete path dealloc code in ext4_ext_handle_uninitialized_extents
  ext4: only call sync_filesystm() when remounting read-only
  fs: push sync_filesystem() down to the file system's remount_fs()
  jbd2: improve error messages for inconsistent journal heads
  jbd2: minimize region locked by j_list_lock in jbd2_journal_forget()
  jbd2: minimize region locked by j_list_lock in journal_get_create_access()
  ...
2014-04-04 15:39:39 -07:00
Theodore Ts'o 02b9984d64 fs: push sync_filesystem() down to the file system's remount_fs()
Previously, the no-op "mount -o mount /dev/xxx" operation when the
file system is already mounted read-write causes an implied,
unconditional syncfs().  This seems pretty stupid, and it's certainly
documented or guaraunteed to do this, nor is it particularly useful,
except in the case where the file system was mounted rw and is getting
remounted read-only.

However, it's possible that there might be some file systems that are
actually depending on this behavior.  In most file systems, it's
probably fine to only call sync_filesystem() when transitioning from
read-write to read-only, and there are some file systems where this is
not needed at all (for example, for a pseudo-filesystem or something
like romfs).

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: linux-fsdevel@vger.kernel.org
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Cc: Jan Kara <jack@suse.cz>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Anders Larsen <al@alarsen.net>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Cc: Petr Vandrovec <petr@vandrovec.name>
Cc: xfs@oss.sgi.com
Cc: linux-btrfs@vger.kernel.org
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Cc: codalist@coda.cs.cmu.edu
Cc: linux-ext4@vger.kernel.org
Cc: linux-f2fs-devel@lists.sourceforge.net
Cc: fuse-devel@lists.sourceforge.net
Cc: cluster-devel@redhat.com
Cc: linux-mtd@lists.infradead.org
Cc: jfs-discussion@lists.sourceforge.net
Cc: linux-nfs@vger.kernel.org
Cc: linux-nilfs@vger.kernel.org
Cc: linux-ntfs-dev@lists.sourceforge.net
Cc: ocfs2-devel@oss.oracle.com
Cc: reiserfs-devel@vger.kernel.org
2014-03-13 10:14:33 -04:00
Masanari Iida e227867f12 treewide: Fix typo in Documentation/DocBook
This patch fix spelling typo in Documentation/DocBook.
It is because .html and .xml files are generated by make htmldocs,
I have to fix a typo within the source files.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-19 14:58:17 +01:00
Oleg Nesterov 6bc080d8fd debugfs: use list_next_entry() in debugfs_remove_recursive()
Change debugfs_remove_recursive() to use list_next_entry(child), no
changes in generated code.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eilon Greenstein <eilong@broadcom.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:24 +09:00
Oleg Nesterov 776164c1fa debugfs: debugfs_remove_recursive() must not rely on list_empty(d_subdirs)
debugfs_remove_recursive() is wrong,

1. it wrongly assumes that !list_empty(d_subdirs) means that this
   dir should be removed.

   This is not that bad by itself, but:

2. if d_subdirs does not becomes empty after __debugfs_remove()
   it gives up and silently fails, it doesn't even try to remove
   other entries.

   However ->d_subdirs can be non-empty because it still has the
   already deleted !debugfs_positive() entries.

3. simple_release_fs() is called even if __debugfs_remove() fails.

Suppose we have

	dir1/
		dir2/
			file2
		file1

and someone opens dir1/dir2/file2.

Now, debugfs_remove_recursive(dir1/dir2) succeeds, and dir1/dir2 goes
away.

But debugfs_remove_recursive(dir1) silently fails and doesn't remove
this directory. Because it tries to delete (the already deleted)
dir1/dir2/file2 again and then fails due to "Avoid infinite loop"
logic.

Test-case:

	#!/bin/sh

	cd /sys/kernel/debug/tracing
	echo 'p:probe/sigprocmask sigprocmask' >> kprobe_events
	sleep 1000 < events/probe/sigprocmask/id &
	echo -n >| kprobe_events

	[ -d events/probe ] && echo "ERR!! failed to rm probe"

And after that it is not possible to create another probe entry.

With this patch debugfs_remove_recursive() skips !debugfs_positive()
files although this is not strictly needed. The most important change
is that it does not try to make ->d_subdirs empty, it simply scans
the whole list(s) recursively and removes as much as possible.

Link: http://lkml.kernel.org/r/20130726151256.GC19472@redhat.com

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-07-31 12:16:31 -04:00
Mathias Krause a3b2c8c7aa debugfs: write_file_bool() - ensure strtobool() operates on valid data
In case, userland writes an empty string to a bool debugfs file, buf[]
will still be uninitialized when being passed to strtobool() making the
outcome of that function purely random.

Fix this by always zero-terminating the buffer.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03 13:55:02 -07:00
Seth Jennings 3a76e5e09f debugfs: add get/set for atomic types
debugfs currently lack the ability to create attributes
that set/get atomic_t values.

This patch adds support for this through a new
debugfs_create_atomic_t() function.

Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03 13:55:01 -07:00
Eric W. Biederman 7f78e03513 fs: Limit sys_mount to only request filesystem modules.
Modify the request_module to prefix the file system type with "fs-"
and add aliases to all of the filesystems that can be built as modules
to match.

A common practice is to build all of the kernel code and leave code
that is not commonly needed as modules, with the result that many
users are exposed to any bug anywhere in the kernel.

Looking for filesystems with a fs- prefix limits the pool of possible
modules that can be loaded by mount to just filesystems trivially
making things safer with no real cost.

Using aliases means user space can control the policy of which
filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf
with blacklist and alias directives.  Allowing simple, safe,
well understood work-arounds to known problematic software.

This also addresses a rare but unfortunate problem where the filesystem
name is not the same as it's module name and module auto-loading
would not work.  While writing this patch I saw a handful of such
cases.  The most significant being autofs that lives in the module
autofs4.

This is relevant to user namespaces because we can reach the request
module in get_fs_type() without having any special permissions, and
people get uncomfortable when a user specified string (in this case
the filesystem type) goes all of the way to request_module.

After having looked at this issue I don't think there is any
particular reason to perform any filtering or permission checks beyond
making it clear in the module request that we want a filesystem
module.  The common pattern in the kernel is to call request_module()
without regards to the users permissions.  In general all a filesystem
module does once loaded is call register_filesystem() and go to sleep.
Which means there is not much attack surface exposed by loading a
filesytem module unless the filesystem is mounted.  In a user
namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT,
which most filesystems do not set today.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reported-by: Kees Cook <keescook@google.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-03-03 19:36:31 -08:00
Greg Kroah-Hartman ed408f7c0f Merge 3.9-rc4 into driver-core-next
This is to fix up a build problem with a wireless driver due to the
dynamic-debug patches in this branch.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17 19:48:18 -08:00
Sasha Levin 1884bd4b14 debugfs: remove redundant initialization of dentry
We already initialize it to NULL when declaring it, no need to do
that twice.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17 13:02:08 -08:00
Dave Reisner f1688e0431 debugfs: convert gid= argument from decimal, not octal
This patch technically breaks userspace, but I suspect that anyone who
actually used this flag would have encountered this brokenness, declared
it lunacy, and already sent a patch.

Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Reviewed-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11 05:56:01 -08:00
Yan Hong 7dd2517c39 fs/debugsfs: remove unnecessary inode->i_private initialization
inode->i_private is promised to be NULL on allocation, no need to set it
explicitly.

Signed-off-by: Yan Hong <clouds.yan@gmail.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15 17:46:42 -08:00
Linus Torvalds 437589a74b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull user namespace changes from Eric Biederman:
 "This is a mostly modest set of changes to enable basic user namespace
  support.  This allows the code to code to compile with user namespaces
  enabled and removes the assumption there is only the initial user
  namespace.  Everything is converted except for the most complex of the
  filesystems: autofs4, 9p, afs, ceph, cifs, coda, fuse, gfs2, ncpfs,
  nfs, ocfs2 and xfs as those patches need a bit more review.

  The strategy is to push kuid_t and kgid_t values are far down into
  subsystems and filesystems as reasonable.  Leaving the make_kuid and
  from_kuid operations to happen at the edge of userspace, as the values
  come off the disk, and as the values come in from the network.
  Letting compile type incompatible compile errors (present when user
  namespaces are enabled) guide me to find the issues.

  The most tricky areas have been the places where we had an implicit
  union of uid and gid values and were storing them in an unsigned int.
  Those places were converted into explicit unions.  I made certain to
  handle those places with simple trivial patches.

  Out of that work I discovered we have generic interfaces for storing
  quota by projid.  I had never heard of the project identifiers before.
  Adding full user namespace support for project identifiers accounts
  for most of the code size growth in my git tree.

  Ultimately there will be work to relax privlige checks from
  "capable(FOO)" to "ns_capable(user_ns, FOO)" where it is safe allowing
  root in a user names to do those things that today we only forbid to
  non-root users because it will confuse suid root applications.

  While I was pushing kuid_t and kgid_t changes deep into the audit code
  I made a few other cleanups.  I capitalized on the fact we process
  netlink messages in the context of the message sender.  I removed
  usage of NETLINK_CRED, and started directly using current->tty.

  Some of these patches have also made it into maintainer trees, with no
  problems from identical code from different trees showing up in
  linux-next.

  After reading through all of this code I feel like I might be able to
  win a game of kernel trivial pursuit."

Fix up some fairly trivial conflicts in netfilter uid/git logging code.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (107 commits)
  userns: Convert the ufs filesystem to use kuid/kgid where appropriate
  userns: Convert the udf filesystem to use kuid/kgid where appropriate
  userns: Convert ubifs to use kuid/kgid
  userns: Convert squashfs to use kuid/kgid where appropriate
  userns: Convert reiserfs to use kuid and kgid where appropriate
  userns: Convert jfs to use kuid/kgid where appropriate
  userns: Convert jffs2 to use kuid and kgid where appropriate
  userns: Convert hpfs to use kuid and kgid where appropriate
  userns: Convert btrfs to use kuid/kgid where appropriate
  userns: Convert bfs to use kuid/kgid where appropriate
  userns: Convert affs to use kuid/kgid wherwe appropriate
  userns: On alpha modify linux_to_osf_stat to use convert from kuids and kgids
  userns: On ia64 deal with current_uid and current_gid being kuid and kgid
  userns: On ppc convert current_uid from a kuid before printing.
  userns: Convert s390 getting uid and gid system calls to use kuid and kgid
  userns: Convert s390 hypfs to use kuid and kgid where appropriate
  userns: Convert binder ipc to use kuids
  userns: Teach security_path_chown to take kuids and kgids
  userns: Add user namespace support to IMA
  userns: Convert EVM to deal with kuids and kgids in it's hmac computation
  ...
2012-10-02 11:11:09 -07:00
Linus Torvalds 06d2fe153b Driver core merge for 3.7-rc1
Here is the big driver core update for 3.7-rc1.
 
 A number of firmware_class.c updates (as you saw a month or so ago), and
 some hyper-v updates and some printk fixes as well.  All patches that
 are outside of the drivers/base area have been acked by the respective
 maintainers, and have all been in the linux-next tree for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlBp3vkACgkQMUfUDdst+ylQoACgldktGFgkCLzH+rGYthrXOC5P
 9hUAnjmOhdoHlMTL81vWTlH+BrGernym
 =khrr
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core merge from Greg Kroah-Hartman:
 "Here is the big driver core update for 3.7-rc1.

  A number of firmware_class.c updates (as you saw a month or so ago),
  and some hyper-v updates and some printk fixes as well.  All patches
  that are outside of the drivers/base area have been acked by the
  respective maintainers, and have all been in the linux-next tree for a
  while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'driver-core-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
  memory: tegra{20,30}-mc: Fix reading incorrect register in mc_readl()
  device.h: Add missing inline to #ifndef CONFIG_PRINTK dev_vprintk_emit
  memory: emif: Add ifdef CONFIG_DEBUG_FS guard for emif_debugfs_[init|exit]
  Documentation: Fixes some translation error in Documentation/zh_CN/gpio.txt
  Documentation: Remove 3 byte redundant code at the head of the Documentation/zh_CN/arm/booting
  Documentation: Chinese translation of Documentation/video4linux/omap3isp.txt
  device and dynamic_debug: Use dev_vprintk_emit and dev_printk_emit
  dev: Add dev_vprintk_emit and dev_printk_emit
  netdev_printk/netif_printk: Remove a superfluous logging colon
  netdev_printk/dynamic_netdev_dbg: Directly call printk_emit
  dev_dbg/dynamic_debug: Update to use printk_emit, optimize stack
  driver-core: Shut up dev_dbg_reatelimited() without DEBUG
  tools/hv: Parse /etc/os-release
  tools/hv: Check for read/write errors
  tools/hv: Fix exit() error code
  tools/hv: Fix file handle leak
  Tools: hv: Implement the KVP verb - KVP_OP_GET_IP_INFO
  Tools: hv: Rename the function kvp_get_ip_address()
  Tools: hv: Implement the KVP verb - KVP_OP_SET_IP_INFO
  Tools: hv: Add an example script to configure an interface
  ...
2012-10-01 12:10:44 -07:00
Linus Torvalds e05e279e6f debugfs: fix u32_array race in format_array_alloc
The format_array_alloc() function is fundamentally racy, in that it
prints the array twice: once to figure out how much space to allocate
for the buffer, and the second time to actually print out the data.

If any of the array contents changes in between, the allocation size may
be wrong, and the end result may be truncated in odd ways.

Just don't do it.  Allocate a maximum-sized array up-front, and just
format the array contents once.  The only user of the u32_array
interfaces is the Xen spinlock statistics code, and it has 31 entries in
the arrays, so the maximum size really isn't that big, and the end
result is much simpler code without the bug.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-21 11:48:05 -07:00
David Rientjes 36048853c5 debugfs: fix race in u32_array_read and allocate array at open
u32_array_open() is racy when multiple threads read from a file with a
seek position of zero, i.e. when two or more simultaneous reads are
occurring after the non-seekable files are created.  It is possible that
file->private_data is double-freed because the threads races between

	kfree(file->private-data);

and

	file->private_data = NULL;

The fix is to only do format_array_alloc() when the file is opened and
free it when it is closed.

Note that because the file has always been non-seekable, you can't open
it and read it multiple times anyway, so the data has always been
generated just once.  The difference is that now it is generated at open
time rather than at the time of the first read, and that avoids the
race.

Reported-by: Dave Jones <davej@redhat.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Raghavendra <raghavendra.kt@linux.vnet.ibm.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-21 10:28:17 -07:00
Eric W. Biederman 7dc05881b6 userns: Convert debugfs to use kuid/kgid where appropriate.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-06 19:02:52 -07:00
Kees Cook 82aceae4f0 debugfs: more tightly restrict default mount mode
Since the debugfs is mostly only used by root, make the default mount
mode 0700. Most system owners do not need a more permissive value,
but they can choose to weaken the restrictions via their fstab.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-27 13:42:02 -07:00
Chris Wright 3cd52ab68b debugfs: make __create_file static
It's only used locally, no need to pollute global namespace.

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16 11:41:51 -07:00
Linus Torvalds fa93669a19 Driver core merge for 3.6-rc1
Here's the big driver core pull request for 3.6-rc1.
 
 Unlike 3.5, this kernel should be a lot tamer, with the printk changes now
 settled down.  All we have here is some extcon driver updates, w1 driver
 updates, a few printk cleanups that weren't needed for 3.5, but are good to
 have now, and some other minor fixes/changes in the driver core.
 
 All of these have been in the linux-next releases for a while now.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAlARgIUACgkQMUfUDdst+ynDHgCfRNwIB9L+zZvjcKE5e1BhDbUl
 wVUAn398DFgbJ1+PjGkd1EMR2uVTh7Ou
 =MIFu
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core changes from Greg Kroah-Hartman:
 "Here's the big driver core pull request for 3.6-rc1.

  Unlike 3.5, this kernel should be a lot tamer, with the printk changes
  now settled down.  All we have here is some extcon driver updates, w1
  driver updates, a few printk cleanups that weren't needed for 3.5, but
  are good to have now, and some other minor fixes/changes in the driver
  core.

  All of these have been in the linux-next releases for a while now.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'driver-core-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (38 commits)
  printk: Export struct log size and member offsets through vmcoreinfo
  Drivers: hv: Change the hex constant to a decimal constant
  driver core: don't trigger uevent after failure
  extcon: MAX77693: Add extcon-max77693 driver to support Maxim MAX77693 MUIC device
  sysfs: fail dentry revalidation after namespace change fix
  sysfs: fail dentry revalidation after namespace change
  extcon: spelling of detach in function doc
  extcon: arizona: Stop microphone detection if we give up on it
  extcon: arizona: Update cable reporting calls and split headset
  PM / Runtime: Do not increment device usage counts before probing
  kmsg - do not flush partial lines when the console is busy
  kmsg - export "continuation record" flag to /dev/kmsg
  kmsg - avoid warning for CONFIG_PRINTK=n compilations
  kmsg - properly print over-long continuation lines
  driver-core: Use kobj_to_dev instead of re-implementing it
  driver-core: Move kobj_to_dev from genhd.h to device.h
  driver core: Move deferred devices to the end of dpm_list before probing
  driver core: move uevent call to driver_register
  driver core: fix shutdown races with probe/remove(v3)
  Extcon: Arizona: Add driver for Wolfson Arizona class devices
  ...
2012-07-26 11:25:33 -07:00
Al Viro ac481d6ca4 debugfs: get rid of useless arguments to debugfs_{mkdir,symlink}
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14 16:35:30 +04:00
Al Viro cfa57c11b0 debugfs: fold debugfs_create_by_name() into the only caller
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14 16:35:25 +04:00
Al Viro c3b1a35084 debugfs: make sure that debugfs_create_file() gets used only for regulars
It, debugfs_create_dir() and debugfs_create_link() use the common helper
now.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-14 16:35:19 +04:00
Arend van Spriel a59d6293e5 debugfs: change parameter check in debugfs_remove() functions
The dentry parameter in debugfs_remove() and debugfs_remove_recursive()
is checked being a NULL pointer. To make cleanup by callers easier this
check is extended using the IS_ERR_OR_NULL macro instead because the
debugfs_create_... functions can return a ERR_PTR() value.

Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13 16:40:41 -07:00
Srivatsa Vaddagiri 9fe2a70153 debugfs: Add support to print u32 array in debugfs
Move the code from Xen to debugfs to make the code common
for other users as well.

Accked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Suzuki Poulose <suzuki@in.ibm.com>
[v1: Fixed rebase issues]
[v2: Fixed PPC compile issues]
Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-04-17 00:18:36 -04:00
Stephen Boyd 234e340582 simple_open: automatically convert to simple_open()
Many users of debugfs copy the implementation of default_open() when
they want to support a custom read/write function op.  This leads to a
proliferation of the default_open() implementation across the entire
tree.

Now that the common implementation has been consolidated into libfs we
can replace all the users of this function with simple_open().

This replacement was done with the following semantic patch:

<smpl>
@ open @
identifier open_f != simple_open;
identifier i, f;
@@
-int open_f(struct inode *i, struct file *f)
-{
(
-if (i->i_private)
-f->private_data = i->i_private;
|
-f->private_data = i->i_private;
)
-return 0;
-}

@ has_open depends on open @
identifier fops;
identifier open.open_f;
@@
struct file_operations fops = {
...
-.open = open_f,
+.open = simple_open,
...
};
</smpl>

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-05 15:25:50 -07:00
Linus Torvalds e2a0883e40 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile 1 from Al Viro:
 "This is _not_ all; in particular, Miklos' and Jan's stuff is not there
  yet."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (64 commits)
  ext4: initialization of ext4_li_mtx needs to be done earlier
  debugfs-related mode_t whack-a-mole
  hfsplus: add an ioctl to bless files
  hfsplus: change finder_info to u32
  hfsplus: initialise userflags
  qnx4: new helper - try_extent()
  qnx4: get rid of qnx4_bread/qnx4_getblk
  take removal of PF_FORKNOEXEC to flush_old_exec()
  trim includes in inode.c
  um: uml_dup_mmap() relies on ->mmap_sem being held, but activate_mm() doesn't hold it
  um: embed ->stub_pages[] into mmu_context
  gadgetfs: list_for_each_safe() misuse
  ocfs2: fix leaks on failure exits in module_init
  ecryptfs: make register_filesystem() the last potential failure exit
  ntfs: forgets to unregister sysctls on register_filesystem() failure
  logfs: missing cleanup on register_filesystem() failure
  jfs: mising cleanup on register_filesystem() failure
  make configfs_pin_fs() return root dentry on success
  configfs: configfs_create_dir() has parent dentry in dentry->d_parent
  configfs: sanitize configfs_create()
  ...
2012-03-21 13:36:41 -07:00
Al Viro 88187398cc debugfs-related mode_t whack-a-mole
all of those should be umode_t...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-20 21:29:53 -04:00
Greg Kroah-Hartman bd1d462e13 Merge 3.3-rc2 into the driver-core-next branch.
This was done to resolve a merge and build problem with the
drivers/acpi/processor_driver.c file.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-02 11:24:44 -08:00
Ludwig Nussel d6e486868c debugfs: add mode, uid and gid options
Cautious admins may want to restrict access to debugfs. Currently a
manual chown/chmod e.g. in an init script is needed to achieve that.
Distributions that want to make the mount options configurable need
to add extra config files. By allowing to set the root inode's uid,
gid and mode via mount options no such hacks are needed anymore.
Instead configuration becomes straight forward via fstab.

Signed-off-by: Ludwig Nussel <ludwig.nussel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-26 11:28:49 -08:00
Randy Dunlap b5763accd3 kernel-doc: fix new warnings in debugfs
Fix new kernel-doc warnings:

Warning(fs/debugfs/file.c:556): No description found for parameter 'nregs'
Warning(fs/debugfs/file.c:556): Excess function parameter 'mregs' description in 'debugfs_print_regs32'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-23 08:44:53 -08:00
Linus Torvalds 972b2c7199 Merge branch 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits)
  reiserfs: Properly display mount options in /proc/mounts
  vfs: prevent remount read-only if pending removes
  vfs: count unlinked inodes
  vfs: protect remounting superblock read-only
  vfs: keep list of mounts for each superblock
  vfs: switch ->show_options() to struct dentry *
  vfs: switch ->show_path() to struct dentry *
  vfs: switch ->show_devname() to struct dentry *
  vfs: switch ->show_stats to struct dentry *
  switch security_path_chmod() to struct path *
  vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb
  vfs: trim includes a bit
  switch mnt_namespace ->root to struct mount
  vfs: take /proc/*/mounts and friends to fs/proc_namespace.c
  vfs: opencode mntget() mnt_set_mountpoint()
  vfs: spread struct mount - remaining argument of next_mnt()
  vfs: move fsnotify junk to struct mount
  vfs: move mnt_devname
  vfs: move mnt_list to struct mount
  vfs: switch pnode.h macros to struct mount *
  ...
2012-01-08 12:19:57 -08:00
Al Viro f4ae40a6a5 switch debugfs to umode_t
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:56 -05:00
Al Viro 4c1d5a64f1 vfs: for usbfs, etc. internal vfsmounts ->mnt_sb->s_root == ->mnt_root
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:52:41 -05:00
Heiko Carstens 3b85e4ab2e debugfs: add missing #ifdef HAS_IOMEM
"debugfs: add tools to printk 32-bit registers" adds new functions which rely
on IOMEM functionality which is not present on all architectures and therefore
result in compile errors:

fs/debugfs/file.c: In function 'debugfs_print_regs32':
fs/debugfs/file.c:561:7: error: implicit declaration of function 'readl' [-Werror=implicit-function-declaration]

Add an #ifdef CONFIG_HAS_IOMEM to fix this

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Alessandro Rubini <rubini@gnudd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-03 16:45:16 -08:00
Dan Carpenter 5858441c95 debugfs: remove unneeded cast in debugfs_print_regs32()
The cast here causes a Sparse warning:
fs/debugfs/file.c:561:42: warning: cast removes address space of expression
fs/debugfs/file.c:561:42: warning: incorrect type in argument 1 (different address spaces)
fs/debugfs/file.c:561:42:    expected void const volatile [noderef] <asn:2>*addr
fs/debugfs/file.c:561:42:    got void *<noident>

It's redundant to cast it to a (void *) anyway when it is already a
(void __iomem *).

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-26 20:12:47 -08:00
Alessandro Rubini 03e099fbb0 debugfs: bugfix: include <linux/io.h> in file.c
The regs32 machinery uses readl. I forgot the mandatory include
and the code was not compiling on all archs.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-22 10:20:05 -08:00
Alessandro Rubini 8ee4dd9f06 debugfs: print_regs32: make regs array a const pointer
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18 15:19:21 -08:00
Alessandro Rubini 1a087c6ad9 debugfs: add tools to printk 32-bit registers
Some debugfs file I deal with are mostly blocks of registers,
i.e. lines of the form "<name> = 0x<value>". Some files are only
registers, some include registers blocks among other material.  This
patch introduces data structures and functions to deal with both
cases.  I expect more users of this over time.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18 10:31:22 -08:00
Harry Wei bd33d12fba debugfs: Fix a comment mistake
The file is fs/debugfs/inode.c but the comment says it is file.c.
This patch can fix this little mistake.

Signed-off-by: Harry Wei <harryxiyou@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-22 17:41:48 -07:00
Stephen Boyd c42d223714 debugfs: Silence DEBUG_STRICT_USER_COPY_CHECKS=y warning
Enabling DEBUG_STRICT_USER_COPY_CHECKS causes the following
warning:

In file included from arch/x86/include/asm/uaccess.h:573,
                 from include/linux/uaccess.h:5,
                 from include/linux/highmem.h:7,
                 from include/linux/pagemap.h:10,
                 from fs/debugfs/file.c:18:
In function 'copy_from_user',
    inlined from 'write_file_bool' at fs/debugfs/file.c:435:
arch/x86/include/asm/uaccess_64.h:65: warning: call to
'copy_from_user_overflow' declared with attribute warning:
copy_from_user() buffer size is not provably correct

presumably due to buf_size being signed causing GCC to fail to
see that buf_size can't become negative.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-13 16:15:35 -07:00
Jonathan Cameron 8705b48e71 debugfs: move to new strtobool
No functional changes requires that we eat errors from strtobool.
If people want to not do this, then it should be fixed at a later date.

V2: Simplification suggested by Rusty Russell removes the need for
additional variable ret.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-25 16:04:52 -07:00
Jan Kara 25d41d8455 debugfs: Fix filesystem reference counting on debugfs_remove() failure
When __debugfs_remove() fails (because simple_rmdir() fails e.g. when a
directory is not empty), we must not decrement use count of the filesystem
as nothing was in fact deleted.

This fixes use after free caused by debugfs in some cases.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-18 08:07:18 -08:00
Amerigo Wang 1f7da214e2 debugfs: remove module_exit()
debugfs can't be a module, so module_exit() is meaningless for it.

Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03 15:39:17 -08:00
Al Viro fc14f2fef6 convert get_sb_single() users
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29 04:16:28 -04:00
Christoph Hellwig 85fe4025c6 fs: do not assign default i_ino in new_inode
Instead of always assigning an increasing inode number in new_inode
move the call to assign it into those callers that actually need it.
For now callers that need it is estimated conservatively, that is
the call is added to all filesystems that do not assign an i_ino
by themselves.  For a few more filesystems we can avoid assigning
any inode number given that they aren't user visible, and for others
it could be done lazily when an inode number is actually needed,
but that's left for later patches.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-25 21:26:11 -04:00
Arnd Bergmann 6038f373a3 llseek: automatically add .llseek fop
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.

The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.

New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time.  Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.

The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.

Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.

Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.

===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
//   but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}

@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}

@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
   *off = E
|
   *off += E
|
   func(..., off, ...)
|
   E = *off
)
...+>
}

@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}

@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
  *off = E
|
  *off += E
|
  func(..., off, ...)
|
  E = *off
)
...+>
}

@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}

@ fops0 @
identifier fops;
@@
struct file_operations fops = {
 ...
};

@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
 .llseek = llseek_f,
...
};

@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
 .read = read_f,
...
};

@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
 .write = write_f,
...
};

@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
 .open = open_f,
...
};

// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
...  .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};

@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
...  .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};

// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
...  .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};

// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};

// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};

@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+	.llseek = default_llseek, /* write accesses f_pos */
};

// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////

@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
 .write = write_f,
 .read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};

@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};

@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};

@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
2010-10-15 15:53:27 +02:00
Huang Ying 15b0beaa33 Add x64 support to debugfs
Add debugfs_create_x64. This is needed by ACPI APEI EINJ parameters support.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-19 22:41:57 -04:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Al Viro 123df2944c Lose the new_name argument of fsnotify_move()
it's always new_dentry->d_name.name

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-02-08 14:38:36 -05:00
Al Viro ef52c75e4b get rid of pointless checks after simple_pin_fs()
if we'd just got success from it, vfsmount won't be NULL

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-01-26 22:22:26 -05:00
Mathieu Desnoyers d3a3b0adad debugfs: fix create mutex racy fops and private data
Setting fops and private data outside of the mutex at debugfs file
creation introduces a race where the files can be opened with the wrong
file operations and private data.  It is easy to trigger with a process
waiting on file creation notification.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11 11:24:53 -08:00
Alberto Bertogli be030e653f fs/debugfs/inode.c: fix comment typos
Signed-off-by: Alberto Bertogli <albertito@blitiri.com.ar>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04 15:39:52 +01:00
Robin Getz e4792aa30f debugfs: use specified mode to possibly mark files read/write only
In many SoC implementations there are hardware registers can be read or
write only.  This extends the debugfs to enforce the file permissions for
these types of registers by providing a set of fops which are read or
write only.  This assumes that the kernel developer knows more about the
hardware than the user (even root users) -- which is normally true.

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:30:28 -07:00
Jonathan Corbet 400ced61fa debugfs: fix docbook error
Fix an error in debugfs_create_blob's docbook description

It cannot actually be used to write a binary blob.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2009-06-15 21:30:24 -07:00
Steven Rostedt 56a83cc929 debugfs: dont stop on first failed recursive delete
debugfs: dont stop on first failed recursive delete

While running a while loop of removing a module that removes a debugfs
directory with debugfs_remove_recursive, and at the same time doing a
while loop of cat of a file in that directory, I would hit a point where
somehow the cat of the file caused the remove to fail.

The result is that other files did not get removed when the module
was removed. I simple read of one of those file can oops the kernel
because the operations to the file no longer exist (removed by module).

The funny thing is that the file being cat'ed was removed. It was
the siblings that were not. I see in the code to debugfs_remove_recursive
there's a test that checks if the child fails to bail out of the loop
to prevent an infinite loop.

What this patch does is to still try any siblings in that directory.
If all the siblings fail, or there are no more siblings, then we exit
the loop.

This fixes the above symptom, but...

This is no full proof. It makes the debugfs_remove_recursive a bit more
robust, but it does not explain why the one file failed. There may
be some kind of delay deletion that makes the debugfs think it did
not succeed. So this patch is more of a fix for the symptom but not
the disease.

This patch still makes the debugfs_remove_recursive more robust and
until I can find out why the bug exists, this patch will keep
the kernel from oopsing in most cases.  Even after the cause is found
I think this change can stand on its own and should be kept.

[ Impact: prevent kernel oops on module unload and reading debugfs files ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:30:24 -07:00
Frederic Weisbecker c0f92ba99b debugfs: function to know if debugfs is initialized
Impact: add new debugfs API

With ftrace, some tracers are registered in early initcalls
and attempt to create files on the debugfs filesystem.
Depending on when they are activated, they can try to create their
file at any time. Some checks can be done on the tracing area
but providing a helper to know if debugfs is registered make it
really more easy.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1237759847-21025-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-23 16:25:46 +01:00
Inaky Perez-Gonzalez 5e07878787 debugfs: add helpers for exporting a size_t simple value
In the same spirit as debugfs_create_*(), introduce helpers for
exporting size_t values over debugfs.

The only trick done is that the format verifier is kept at %llu
instead of %zu; otherwise type warnings would pop up:

format ‘%zu’ expects type ‘size_t’, but argument 2 has type ‘long long unsigned int’

There is no real way to fix this one--however, we can consider %llu
and %zu to be compatible if we consider that we are using the same for
validating in debugfs_create_{x,u}{8,16,32}().

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07 10:00:16 -08:00
Al Viro 56ff5efad9 zero i_uid/i_gid on inode allocation
... and don't bother in callers.  Don't bother with zeroing i_blocks,
while we are at it - it's already been zeroed.

i_mode is not worth the effort; it has no common default value.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-05 11:54:28 -05:00
Mimi Zohar 9256292782 integrity: special fs magic
Discussion on the mailing list questioned the use of these
magic values in userspace, concluding these values are already
exported to userspace via statfs and their correct/incorrect
usage is left up to the userspace application.

  - Move special fs magic number definitions to magic.h
  - Add magic.h include

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Reviewed-by: James Morris <jmorris@namei.org>
Signed-off-by: James Morris <jmorris@namei.org>
2008-10-13 09:47:43 +11:00
Haavard Skinnemoen 9505e63756 debugfs: Implement debugfs_remove_recursive()
debugfs_remove_recursive() will remove a dentry and all its children.
Drivers can use this to zap their whole debugfs tree so that they don't
need to keep track of every single debugfs dentry they created.

It may fail to remove the whole tree in certain cases:

sh-3.2# rmmod atmel-mci < /sys/kernel/debug/mmc0/ios/clock
mmc0: card b368 removed
atmel_mci atmel_mci.0: Lost dma0chan1, falling back to PIO
sh-3.2# ls /sys/kernel/debug/mmc0/
ios

But I'm not sure if that case can be handled in any sane manner.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: Pierre Ossman <drzeus-list@drzeus.cx>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:54:59 -07:00
Robert P. J. Day 883ce42ec4 DEBUGFS: Correct location of debugfs API documentation.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-30 16:52:47 -07:00
Harvey Harrison 3634634edd debugfs: fix sparse warnings
extern does not belong in C files, move declaration to linux/debugfs.h
fs/debugfs/file.c:42:30: warning: symbol 'debugfs_file_operations' was not declared. Should it be static?
fs/debugfs/file.c:54:31: warning: symbol 'debugfs_link_operations' was not declared. Should it be static?

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-04 14:47:06 -08:00
Christoph Hellwig 8b88b0998e libfs: allow error return from simple attributes
Sometimes simple attributes might need to return an error, e.g. for
acquiring a mutex interruptibly.  In fact we have that situation in
spufs already which is the original user of the simple attributes.  This
patch merged the temporarily forked attributes in spufs back into the
main ones and allows to return errors.

[akpm@linux-foundation.org: build fix]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: <stefano.brivio@polimi.it>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg KH <greg@kroah.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:34 -08:00
Greg Kroah-Hartman 197b12d679 Kobject: convert fs/* from kobject_unregister() to kobject_put()
There is no need for kobject_unregister() anymore, thanks to Kay's
kobject cleanup changes, so replace all instances of it with
kobject_put().


Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:40 -08:00
Greg Kroah-Hartman 0ff21e4663 kobject: convert kernel_kset to be a kobject
kernel_kset does not need to be a kset, but a much simpler kobject now
that we have kobj_attributes.

We also rename kernel_kset to kernel_kobj to catch all users of this
symbol with a build error instead of an easy-to-ignore build warning.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:24 -08:00
Greg Kroah-Hartman bd35b93d80 kset: convert kernel_subsys to use kset_create
Dynamically create the kset instead of declaring it statically.  We also
rename kernel_subsys to kernel_kset to catch all users of this symbol
with a build error instead of an easy-to-ignore build warning.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:14 -08:00
Greg Kroah-Hartman 191e186bd0 kobject: convert debugfs to use kobject_create
We don't need a kset here, a simple kobject will do just fine, so
dynamically create the kobject and use it.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:11 -08:00
Greg Kroah-Hartman 3514faca19 kobject: remove struct kobj_type from struct kset
We don't need a "default" ktype for a kset.  We should set this
explicitly every time for each kset.  This change is needed so that we
can make ksets dynamic, and cleans up one of the odd, undocumented
assumption that the kset/kobject/ktype model has.

This patch is based on a lot of help from Kay Sievers.

Nasty bug in the block code was found by Dave Young
<hidave.darkstar@gmail.com>

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:10 -08:00
Al Viro 5a190ae697 [PATCH] pass dentry to audit_inode()/audit_inode_child()
makes caller simpler *and* allows to scan ancestors

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2007-10-21 02:37:18 -04:00
Randy Dunlap e6716b87d5 docbook: fix filesystems content
Fix filesystems docbook warnings.

Warning(linux-2.6.23-git8//fs/debugfs/file.c:241): No description found for parameter 'name'
Warning(linux-2.6.23-git8//fs/debugfs/file.c:241): No description found for parameter 'mode'
Warning(linux-2.6.23-git8//fs/debugfs/file.c:241): No description found for parameter 'parent'
Warning(linux-2.6.23-git8//fs/debugfs/file.c:241): No description found for parameter 'value'
Warning(linux-2.6.23-git8//include/linux/jbd.h:404): No description found for parameter 'h_lockdep_map'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-15 17:56:36 -07:00
Robin Getz 2ebefc5016 debugfs: helper for decimal challenged
Allows debugfs helper functions to have a hex output, rather than just decimal

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12 14:51:03 -07:00
Jens Axboe a6bb340da3 debugfs: remove rmdir() non-empty complaint
Hi,

This patch kills the pointless debugfs rmdir() printk() when called on a
non-empty directory. blktrace will sometimes have to call it a few times
when forcefully ending a trace, which polutes the log with pointless
warnings.

Rationale:

- It's more code to work-around this "problem" in the debugfs users, and
  you would have to add code to check for empty directories to do so (or
  assume that debugfs is using simple_ helpers, but that would be a
  layering violation).

- Other rmdir() implementations don't complain about something this
  silly.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-18 15:49:48 -07:00
Jan Kara cfc94cdf8e debugfs: add rename for debugfs files
Implement debugfs_rename() to allow renaming files/directories in debugfs.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:09:00 -07:00
Greg Kroah-Hartman 823bccfc40 remove "struct subsystem" as it is no longer needed
We need to work on cleaning up the relationship between kobjects, ksets and
ktypes.  The removal of 'struct subsystem' is the first step of this,
especially as it is not really needed at all.

Thanks to Kay for fixing the bugs in this patch.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 18:57:59 -07:00
Michael Ellerman 8447891fe8 debugfs: Add debugfs_create_u64()
I went to use this the other day, only to find it didn't exist.

It's a straight copy of the debugfs u32 code, then s/u32/u64/. A quick
test shows it seems to be working.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 10:57:31 -07:00
Cornelia Huck 873760fbf4 debugfs: Remove misleading comments.
Just mention which error will be returned if debugfs is disabled. Callers
should be able to figure out themselves what they need to check.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-16 15:19:17 -08:00