Commit Graph

277 Commits

Author SHA1 Message Date
Masahiro Yamada a7d0067147 bpftool: exclude bash-completion/bpftool from .gitignore pattern
tools/bpf/bpftool/.gitignore has the "bpftool" pattern, which is
intended to ignore the following build artifact:

  tools/bpf/bpftool/bpftool

However, the .gitignore entry is effective not only for the current
directory, but also for any sub-directories.

So, from the point of .gitignore grammar, the following check-in file
is also considered to be ignored:

  tools/bpf/bpftool/bash-completion/bpftool

As the manual gitignore(5) says "Files already tracked by Git are not
affected", this is not a problem as far as Git is concerned.

However, Git is not the only program that parses .gitignore because
.gitignore is useful to distinguish build artifacts from source files.

For example, tar(1) supports the --exclude-vcs-ignore option. As of
writing, this option does not work perfectly, but it intends to create
a tarball excluding files specified by .gitignore.

So, I believe it is better to fix this issue.

You can fix it by prefixing the pattern with a slash; the leading slash
means the specified pattern is relative to the current directory.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-05-04 23:43:57 -07:00
David S. Miller ff24e4980a Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Three trivial overlapping conflicts.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-02 22:14:21 -04:00
Martin KaFai Lau a19f89f366 bpf: Support BPF_MAP_TYPE_SK_STORAGE in bpf map probing
This patch supports probing for the new BPF_MAP_TYPE_SK_STORAGE.
BPF_MAP_TYPE_SK_STORAGE enforces BTF usage, so the new probe
requires to create and load a BTF also.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-27 09:07:05 -07:00
Andrii Nakryiko 8ed1875bf3 bpftool: fix indendation in bash-completion/bpftool
Fix misaligned default case branch for `prog dump` sub-command.

Reported-by: Quentin Monnet <quentin.monnet@netronome.com>
Cc: Yonghong Song <yhs@fb.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-25 21:45:14 -07:00
Andrii Nakryiko 4a714feefd bpftool: add bash completions for btf command
Add full support for btf command in bash-completion script.

Cc: Quentin Monnet <quentin.monnet@netronome.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-25 21:45:14 -07:00
Andrii Nakryiko ca253339af bpftool/docs: add btf sub-command documentation
Document usage and sample output format for `btf dump` sub-command.

Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-25 21:45:14 -07:00
Andrii Nakryiko c93cc69004 bpftool: add ability to dump BTF types
Add new `btf dump` sub-command to bpftool. It allows to dump
human-readable low-level BTF types representation of BTF types. BTF can
be retrieved from few different sources:
  - from BTF object by ID;
  - from PROG, if it has associated BTF;
  - from MAP, if it has associated BTF data; it's possible to narrow
    down types to either key type, value type, both, or all BTF types;
  - from ELF file (.BTF section).

Output format mostly follows BPF verifier log format with few notable
exceptions:
  - all the type/field/param/etc names are enclosed in single quotes to
    allow easier grepping and to stand out a little bit more;
  - FUNC_PROTO output follows STRUCT/UNION/ENUM format of having one
    line per each argument; this is more uniform and allows easy
    grepping, as opposed to succinct, but inconvenient format that BPF
    verifier log is using.

Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-25 21:45:14 -07:00
Benjamin Poirier 77d764263d bpftool: Fix errno variable usage
The test meant to use the saved value of errno. Given the current code, it
makes no practical difference however.

Fixes: bf598a8f0f ("bpftool: Improve handling of ENOENT on map dumps")
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-25 17:30:14 -07:00
Alban Crequy 8694d8c1f8 tools: bpftool: fix infinite loop in map create
"bpftool map create" has an infinite loop on "while (argc)". The error
case is missing.

Symptoms: when forgetting to type the keyword 'type' in front of 'hash':
$ sudo bpftool map create /sys/fs/bpf/dir/foobar hash key 8 value 8 entries 128
(infinite loop, taking all the CPU)
^C

After the patch:
$ sudo bpftool map create /sys/fs/bpf/dir/foobar hash key 8 value 8 entries 128
Error: unknown arg hash

Fixes: 0b592b5a01 ("tools: bpftool: add map create command")
Signed-off-by: Alban Crequy <alban@kinvolk.io>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-25 17:20:06 -07:00
Stanislav Fomichev 7f0c57fec8 bpftool: show flow_dissector attachment status
Right now there is no way to query whether BPF flow_dissector program
is attached to a network namespace or not. In previous commit, I added
support for querying that info, show it when doing `bpftool net`:

$ bpftool prog loadall ./bpf_flow.o \
	/sys/fs/bpf/flow type flow_dissector \
	pinmaps /sys/fs/bpf/flow
$ bpftool prog
3: flow_dissector  name _dissect  tag 8c9e917b513dd5cc  gpl
        loaded_at 2019-04-23T16:14:48-0700  uid 0
        xlated 656B  jited 461B  memlock 4096B  map_ids 1,2
        btf_id 1
...

$ bpftool net -j
[{"xdp":[],"tc":[],"flow_dissector":[]}]

$ bpftool prog attach pinned \
	/sys/fs/bpf/flow/flow_dissector flow_dissector
$ bpftool net -j
[{"xdp":[],"tc":[],"flow_dissector":["id":3]}]

Doesn't show up in a different net namespace:
$ ip netns add test
$ ip netns exec test bpftool net -j
[{"xdp":[],"tc":[],"flow_dissector":[]}]

Non-json output:
$ bpftool net
xdp:

tc:

flow_dissector:
id 3

v2:
* initialization order (Jakub Kicinski)
* clear errno for batch mode (Quentin Monnet)

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-25 23:49:06 +02:00
Prashant Bhole d1b7725dfe tools/bpftool: show btf_id in map listing
Let's print btf id of map similar to the way we are printing it
for programs.

Sample output:
user@test# bpftool map -f
61: lpm_trie  flags 0x1
	key 20B  value 8B  max_entries 1  memlock 4096B
133: array  name test_btf_id  flags 0x0
	key 4B  value 4B  max_entries 4  memlock 4096B
	pinned /sys/fs/bpf/test100
	btf_id 174
170: array  name test_btf_id  flags 0x0
	key 4B  value 4B  max_entries 4  memlock 4096B
	btf_id 240

Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-16 19:48:26 -07:00
Prashant Bhole d459b59ee0 tools/bpftool: re-organize newline printing for map listing
Let's move the final newline printing in show_map_close_plain() at
the end of the function because it looks correct and consistent with
prog.c. Also let's do related changes for the line which prints
pinned file name.

Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-16 19:48:26 -07:00
Andrey Ignatov f25377ee4f bpftool: Support sysctl hook
Add support for recently added BPF_PROG_TYPE_CGROUP_SYSCTL program type
and BPF_CGROUP_SYSCTL attach type.

Example of bpftool output with sysctl program from selftests:

  # bpftool p load ./test_sysctl_prog.o /mnt/bpf/sysctl_prog type cgroup/sysctl
  # bpftool p l
  9: cgroup_sysctl  name sysctl_tcp_mem  tag 0dd05f81a8d0d52e  gpl
          loaded_at 2019-04-16T12:57:27-0700  uid 0
          xlated 1008B  jited 623B  memlock 4096B
  # bpftool c a /mnt/cgroup2/bla sysctl id 9
  # bpftool c t
  CgroupPath
  ID       AttachType      AttachFlags     Name
  /mnt/cgroup2/bla
      9        sysctl                          sysctl_tcp_mem
  # bpftool c d /mnt/cgroup2/bla sysctl id 9
  # bpftool c t
  CgroupPath
  ID       AttachType      AttachFlags     Name

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-16 19:45:47 -07:00
Benjamin Poirier 3da6e7e408 bpftool: Improve handling of ENOSPC on reuseport_array map dumps
avoids outputting a series of
	value:
	No space left on device

The value itself is not wrong but bpf_fd_reuseport_array_lookup_elem() can
only return it if the map was created with value_size = 8. There's nothing
bpftool can do about it. Instead of repeating this error for every key in
the map, print an explanatory warning and a specialized error.

example before:
key: 00 00 00 00
value:
No space left on device
key: 01 00 00 00
value:
No space left on device
key: 02 00 00 00
value:
No space left on device
Found 0 elements

example after:
Warning: cannot read values from reuseport_sockarray map with value_size != 8
key: 00 00 00 00  value: <cannot read>
key: 01 00 00 00  value: <cannot read>
key: 02 00 00 00  value: <cannot read>
Found 0 elements

Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-16 10:16:33 +02:00
Benjamin Poirier 0478c3bf81 bpftool: Use print_entry_error() in case of ENOENT when dumping
Commit bf598a8f0f ("bpftool: Improve handling of ENOENT on map dumps")
used print_entry_plain() in case of ENOENT. However, that commit introduces
dead code. Per-cpu maps are zero-filled. When reading them, it's all or
nothing. There will never be a case where some cpus have an entry and
others don't.

The truth is that ENOENT is an error case. Use print_entry_error() to
output the desired message. That function's "value" parameter is also
renamed to indicate that we never use it for an actual map value.

The output format is unchanged.

Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-16 10:16:33 +02:00
Quentin Monnet 25df480def tools: bpftool: add a note on program statistics in man page
Linux kernel now supports statistics for BPF programs, and bpftool is
able to dump them. However, these statistics are not enabled by default,
and administrators may not know how to access them.

Add a paragraph in bpftool documentation, under the description of the
"bpftool prog show" command, to explain that such statistics are
available and that their collection is controlled via a dedicated sysctl
knob.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-16 10:13:37 +02:00
Quentin Monnet 88b3eed805 tools: bpftool: fix short option name for printing version in man pages
Manual pages would tell that option "-v" (lower case) would print the
version number for bpftool. This is wrong: the short name of the option
is "-V" (upper case). Fix the documentation accordingly.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-16 10:13:32 +02:00
Quentin Monnet 9a487883bd tools: bpftool: fix man page documentation for "pinmaps" keyword
The "pinmaps" keyword is present in the man page, in the verbose
description of the "bpftool prog load" command. However, it is missing
from the summary of available commands at the beginning of the file. Add
it there as well.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-16 10:13:27 +02:00
Quentin Monnet 39c9f10639 tools: bpftool: reset errno for "bpftool cgroup tree"
When trying to dump the tree of all cgroups under a given root node,
bpftool attempts to query programs of all available attach types. Some
of those attach types do not support queries, therefore several of the
calls are actually expected to fail.

Those calls set errno to EINVAL, which has no consequence for dumping
the rest of the tree. It does have consequences however if errno is
inspected at a later time. For example, bpftool batch mode relies on
errno to determine whether a command has succeeded, and whether it
should carry on with the next command. Setting errno to EINVAL when
everything worked as expected would therefore make such command fail:

        # echo 'cgroup tree \n net show' | \
                bpftool batch file -

To improve this, reset errno when its value is EINVAL after attempting
to show programs for all existing attach types in do_show_tree_fn().

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-16 10:13:21 +02:00
Quentin Monnet 031ebc1aac tools: bpftool: remove blank line after btf_id when listing programs
Commit 569b0c7773 ("tools/bpftool: show btf id in program information")
made bpftool print an empty line after each program entry when listing
the BPF programs loaded on the system (plain output). This is especially
confusing when some programs have an associated BTF id, and others
don't. Let's remove the blank line.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-16 10:13:12 +02:00
Prashant Bhole 569b0c7773 tools/bpftool: show btf id in program information
Let's add a way to know whether a program has btf context.
Patch adds 'btf_id' in the output of program listing.
When btf_id is present, it means program has btf context.

Sample output:
user@test# bpftool prog list
25: xdp  name xdp_prog1  tag 539ec6ce11b52f98  gpl
	loaded_at 2019-04-10T11:44:20+0900  uid 0
	xlated 488B  not jited  memlock 4096B  map_ids 23
	btf_id 1

Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-11 10:21:39 +02:00
Daniel Borkmann 817998afa0 bpf: bpftool support for dumping data/bss/rodata sections
Add the ability to bpftool to handle BTF Var and DataSec kinds
in order to dump them out of btf_dumper_type(). The value has a
single object with the section name, which itself holds an array
of variables it dumps. A single variable is an object by itself
printed along with its name. From there further type information
is dumped along with corresponding value information.

Example output from .rodata:

  # ./bpftool m d i 150
  [{
          "value": {
              ".rodata": [{
                      "load_static_data.bar": 18446744073709551615
                  },{
                      "num2": 24
                  },{
                      "num5": 43947
                  },{
                      "num6": 171
                  },{
                      "str0": [97,98,99,100,101,102,103,104,105,106,107,108,109,110,111,112,113,114,115,116,117,118,119,120,121,122,0,0,0,0,0,0
                      ]
                  },{
                      "struct0": {
                          "a": 42,
                          "b": 4278120431,
                          "c": 1229782938247303441
                      }
                  },{
                      "struct2": {
                          "a": 0,
                          "b": 0,
                          "c": 0
                      }
                  }
              ]
          }
      }
  ]

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-09 17:05:47 -07:00
Daniel Borkmann d8eca5bbb2 bpf: implement lookup-free direct value access for maps
This generic extension to BPF maps allows for directly loading
an address residing inside a BPF map value as a single BPF
ldimm64 instruction!

The idea is similar to what BPF_PSEUDO_MAP_FD does today, which
is a special src_reg flag for ldimm64 instruction that indicates
that inside the first part of the double insns's imm field is a
file descriptor which the verifier then replaces as a full 64bit
address of the map into both imm parts. For the newly added
BPF_PSEUDO_MAP_VALUE src_reg flag, the idea is the following:
the first part of the double insns's imm field is again a file
descriptor corresponding to the map, and the second part of the
imm field is an offset into the value. The verifier will then
replace both imm parts with an address that points into the BPF
map value at the given value offset for maps that support this
operation. Currently supported is array map with single entry.
It is possible to support more than just single map element by
reusing both 16bit off fields of the insns as a map index, so
full array map lookup could be expressed that way. It hasn't
been implemented here due to lack of concrete use case, but
could easily be done so in future in a compatible way, since
both off fields right now have to be 0 and would correctly
denote a map index 0.

The BPF_PSEUDO_MAP_VALUE is a distinct flag as otherwise with
BPF_PSEUDO_MAP_FD we could not differ offset 0 between load of
map pointer versus load of map's value at offset 0, and changing
BPF_PSEUDO_MAP_FD's encoding into off by one to differ between
regular map pointer and map value pointer would add unnecessary
complexity and increases barrier for debugability thus less
suitable. Using the second part of the imm field as an offset
into the value does /not/ come with limitations since maximum
possible value size is in u32 universe anyway.

This optimization allows for efficiently retrieving an address
to a map value memory area without having to issue a helper call
which needs to prepare registers according to calling convention,
etc, without needing the extra NULL test, and without having to
add the offset in an additional instruction to the value base
pointer. The verifier then treats the destination register as
PTR_TO_MAP_VALUE with constant reg->off from the user passed
offset from the second imm field, and guarantees that this is
within bounds of the map value. Any subsequent operations are
normally treated as typical map value handling without anything
extra needed from verification side.

The two map operations for direct value access have been added to
array map for now. In future other types could be supported as
well depending on the use case. The main use case for this commit
is to allow for BPF loader support for global variables that
reside in .data/.rodata/.bss sections such that we can directly
load the address of them with minimal additional infrastructure
required. Loader support has been added in subsequent commits for
libbpf library.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-09 17:05:46 -07:00
Song Liu cae73f2339 bpftool: use bpf_program__get_prog_info_linear() in prog.c:do_dump()
This patches uses bpf_program__get_prog_info_linear() to simplify the
logic in prog.c do_dump().

Committer testing:

Before:

  # bpftool prog dump xlated id 208 > /tmp/dump.xlated.before
  # bpftool prog dump jited id 208 > /tmp/dump.jited.before
  # bpftool map dump id 107 > /tmp/map.dump.before

After:

  # ~acme/git/perf/tools/bpf/bpftool/bpftool map dump id 107 > /tmp/map.dump.after
  # ~acme/git/perf/tools/bpf/bpftool/bpftool prog dump xlated id 208 > /tmp/dump.xlated.after
  # ~acme/git/perf/tools/bpf/bpftool/bpftool prog dump jited id 208 > /tmp/dump.jited.after
  # diff -u /tmp/dump.xlated.before /tmp/dump.xlated.after
  # diff -u /tmp/dump.jited.before /tmp/dump.jited.after
  # diff -u /tmp/map.dump.before /tmp/map.dump.after
  # ~acme/git/perf/tools/bpf/bpftool/bpftool prog dump xlated id 208
     0: (bf) r6 = r1
     1: (85) call bpf_get_current_pid_tgid#80800
     2: (63) *(u32 *)(r10 -328) = r0
     3: (bf) r2 = r10
     4: (07) r2 += -328
     5: (18) r1 = map[id:107]
     7: (85) call __htab_map_lookup_elem#85680
     8: (15) if r0 == 0x0 goto pc+1
     9: (07) r0 += 56
    10: (b7) r7 = 0
    11: (55) if r0 != 0x0 goto pc+52
    12: (bf) r1 = r10
    13: (07) r1 += -328
    14: (b7) r2 = 64
    15: (bf) r3 = r6
    16: (85) call bpf_probe_read#-46848
    17: (bf) r2 = r10
    18: (07) r2 += -320
    19: (18) r1 = map[id:106]
    21: (07) r1 += 208
    22: (61) r0 = *(u32 *)(r2 +0)
    23: (35) if r0 >= 0x200 goto pc+3
    24: (67) r0 <<= 3
    25: (0f) r0 += r1
    26: (05) goto pc+1
    27: (b7) r0 = 0
    28: (15) if r0 == 0x0 goto pc+35
    29: (71) r1 = *(u8 *)(r0 +0)
    30: (15) if r1 == 0x0 goto pc+33
    31: (b7) r5 = 64
    32: (79) r1 = *(u64 *)(r10 -320)
    33: (15) if r1 == 0x2 goto pc+2
    34: (15) if r1 == 0x101 goto pc+3
    35: (55) if r1 != 0x15 goto pc+19
    36: (79) r3 = *(u64 *)(r6 +16)
    37: (05) goto pc+1
    38: (79) r3 = *(u64 *)(r6 +24)
    39: (15) if r3 == 0x0 goto pc+15
    40: (b7) r1 = 0
    41: (63) *(u32 *)(r10 -260) = r1
    42: (bf) r1 = r10
    43: (07) r1 += -256
    44: (b7) r2 = 256
    45: (85) call bpf_probe_read_str#-46704
    46: (b7) r5 = 328
    47: (63) *(u32 *)(r10 -264) = r0
    48: (bf) r1 = r0
    49: (67) r1 <<= 32
    50: (77) r1 >>= 32
    51: (25) if r1 > 0xff goto pc+3
    52: (07) r0 += 72
    53: (57) r0 &= 255
    54: (bf) r5 = r0
    55: (bf) r4 = r10
    56: (07) r4 += -328
    57: (bf) r1 = r6
    58: (18) r2 = map[id:105]
    60: (18) r3 = 0xffffffff
    62: (85) call bpf_perf_event_output_tp#-45104
    63: (bf) r7 = r0
    64: (bf) r0 = r7
    65: (95) exit
  #

Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: kernel-team@fb.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-4-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-19 16:52:06 -03:00
Jakub Kicinski f74a53d9a5 tools: libbpf: add a correctly named define for map iteration
For historical reasons the helper to loop over maps in an object
is called bpf_map__for_each while it really should be called
bpf_object__for_each_map.  Rename and add a correctly named
define for backward compatibility.

Switch all in-tree users to the correct name (Quentin).

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01 00:53:45 +01:00
Alexei Starovoitov 88ad472b8a tools/bpftool: recognize bpf_prog_info run_time_ns and run_cnt
$ bpftool p s
1: kprobe  tag a56587d488d216c9  gpl run_time_ns 79786 run_cnt 8
	loaded_at 2019-02-22T12:22:51-0800  uid 0
	xlated 352B  not jited  memlock 4096B

$ bpftool --json --pretty p s
[{
        "id": 1,
        "type": "kprobe",
        "tag": "a56587d488d216c9",
        "gpl_compatible": true,
        "run_time_ns": 79786,
        "run_cnt": 8,
        "loaded_at": 1550866971,
        "uid": 0,
        "bytes_xlated": 352,
        "jited": false,
        "bytes_memlock": 4096
    }
]

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-27 17:22:51 +01:00
Alban Crequy a5d9265e01 bpf: bpftool, fix documentation for attach types
bpftool has support for attach types "stream_verdict" and
"stream_parser" but the documentation was referring to them as
"skb_verdict" and "skb_parse". The inconsistency comes from commit
b7d3826c2e ("bpf: bpftool, add support for attaching programs to
maps").

This patch changes the documentation to match the implementation:
- "bpftool prog help"
- man pages
- bash completion

Signed-off-by: Alban Crequy <alban@kinvolk.io>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-19 17:23:18 +01:00
David S. Miller 885e631959 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:

====================
pull-request: bpf-next 2019-02-16

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) numerous libbpf API improvements, from Andrii, Andrey, Yonghong.

2) test all bpf progs in alu32 mode, from Jiong.

3) skb->sk access and bpf_sk_fullsock(), bpf_tcp_sock() helpers, from Martin.

4) support for IP encap in lwt bpf progs, from Peter.

5) remove XDP_QUERY_XSK_UMEM dead code, from Jan.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-16 22:56:34 -08:00
Prashant Bhole ebbed0f46e tools: bpftool: doc, add text about feature-subcommand
This patch adds missing information about feature-subcommand in
bpftool.rst

Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-12 17:06:18 +01:00
David S. Miller a655fe9f19 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
An ipvlan bug fix in 'net' conflicted with the abstraction away
of the IPV6 specific support in 'net-next'.

Similarly, a bug fix for mlx5 in 'net' conflicted with the flow
action conversion in 'net-next'.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08 15:00:17 -08:00
Prashant Bhole a5f2d08270 tools: bpftool: doc, fix incorrect text
Documentation about cgroup, feature, prog uses wrong header
'MAP COMMANDS' while listing commands. This patch corrects the header
in respective doc files.

Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Yonghong Song <yhs@fb.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-06 15:39:15 +01:00
David S. Miller ec7146db15 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
pull-request: bpf-next 2019-01-29

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Teach verifier dead code removal, this also allows for optimizing /
   removing conditional branches around dead code and to shrink the
   resulting image. Code store constrained architectures like nfp would
   have hard time doing this at JIT level, from Jakub.

2) Add JMP32 instructions to BPF ISA in order to allow for optimizing
   code generation for 32-bit sub-registers. Evaluation shows that this
   can result in code reduction of ~5-20% compared to 64 bit-only code
   generation. Also add implementation for most JITs, from Jiong.

3) Add support for __int128 types in BTF which is also needed for
   vmlinux's BTF conversion to work, from Yonghong.

4) Add a new command to bpftool in order to dump a list of BPF-related
   parameters from the system or for a specific network device e.g. in
   terms of available prog/map types or helper functions, from Quentin.

5) Add AF_XDP sock_diag interface for querying sockets from user
   space which provides information about the RX/TX/fill/completion
   rings, umem, memory usage etc, from Björn.

6) Add skb context access for skb_shared_info->gso_segs field, from Eric.

7) Add support for testing flow dissector BPF programs by extending
   existing BPF_PROG_TEST_RUN infrastructure, from Stanislav.

8) Split BPF kselftest's test_verifier into various subgroups of tests
   in order better deal with merge conflicts in this area, from Jakub.

9) Add support for queue/stack manipulations in bpftool, from Stanislav.

10) Document BTF, from Yonghong.

11) Dump supported ELF section names in libbpf on program load
    failure, from Taeung.

12) Silence a false positive compiler warning in verifier's BTF
    handling, from Peter.

13) Fix help string in bpftool's feature probing, from Prashant.

14) Remove duplicate includes in BPF kselftests, from Yue.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-28 19:38:33 -08:00
Jakub Kicinski d76198b0bc tools: bpftool: warn about risky prog array updates
When prog array is updated with bpftool users often refer
to the map via the ID.  Unfortunately, that's likely
to lead to confusion because prog arrays get flushed when
the last user reference is gone.  If there is no other
reference bpftool will create one, update successfully
just to close the map again and have it flushed.

Warn about this case in non-JSON mode.

If the problem continues causing confusion we can remove
the support for referring to a map by ID for prog array
update completely.  For now it seems like the potential
inconvenience to users who know what they're doing outweighs
the benefit.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-29 00:27:38 +01:00
Jakub Kicinski 8c79b35693 tools: bpftool: fix crash with un-owned prog arrays
Prog arrays don't have 'owner_prog_type' and 'owner_jited'
fields in their fdinfo when they are created.  Those fields
are set and reported when first program is checked for
compatibility by bpf_prog_array_compatible().

This means that bpftool cannot expect the fields to always
be there.  Currently trying to show maps on a system with
an un-owned prog array leads to a crash:

$ bpftool map show
389: prog_array  name tail_call_map  flags 0x0
Error: key 'owner_prog_type' not found in fdinfo
Error: key 'owner_jited' not found in fdinfo
       key 4B  value 4B  max_entries 4  memlock 4096B
       Segmentation fault (core dumped)

We pass a NULL pointer to atoi().

Remove the assumption that fdinfo keys are always present.
Add missing validations and remove the p_err() calls which
may lead to broken JSON output as caller will not propagate
the failure.

Fixes: 99a44bef58 ("tools: bpftool: add owner_prog_type and owner_jited to bpftool output")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-28 23:59:46 +01:00
Jiong Wang df791dc167 tools: bpftool: teach cfg code about JMP32
The cfg code need to be aware of the new JMP32 instruction class so it
could partition functions correctly.

Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-26 13:33:01 -08:00
Prashant Bhole 866e6ac474 bpftool: feature probing, change default action
When 'bpftool feature' is executed it shows incorrect help string.

test# bpftool feature
Usage: bpftool bpftool probe [COMPONENT] [macros [prefix PREFIX]]
       bpftool bpftool help

       COMPONENT := { kernel | dev NAME }

Instead of fixing the help text by tweaking argv[] indices, this
patch changes the default action to 'probe'. It makes the behavior
consistent with other subcommands, where first subcommand without
extra parameter results in 'show' action.

Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-24 10:47:52 +01:00
Taeung Song c76e4c228b libbpf: Show supported ELF section names when failing to guess prog/attach type
We need to let users check their wrong ELF section name with proper
ELF section names when they fail to get a prog/attach type from it.
Because users can't realize libbpf guess prog/attach types from given
ELF section names. For example, when a 'cgroup' section name of a
BPF program is used, show available ELF section names(types).

Before:

    $ bpftool prog load bpf-prog.o /sys/fs/bpf/prog1
    Error: failed to guess program type based on ELF section name cgroup

After:

    libbpf: failed to guess program type based on ELF section name 'cgroup'
    libbpf: supported section(type) names are: socket kprobe/ kretprobe/ classifier action tracepoint/ raw_tracepoint/ xdp perf_event lwt_in lwt_out lwt_xmit lwt_seg6local cgroup_skb/ingress cgroup_skb/egress cgroup/skb cgroup/sock cgroup/post_bind4 cgroup/post_bind6 cgroup/dev sockops sk_skb/stream_parser sk_skb/stream_verdict sk_skb sk_msg lirc_mode2 flow_dissector cgroup/bind4 cgroup/bind6 cgroup/connect4 cgroup/connect6 cgroup/sendmsg4 cgroup/sendmsg6

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Andrey Ignatov <rdna@fb.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-23 12:27:04 +01:00
Paolo Abeni b0ca5ecb8e bpftool: fix percpu maps updating
When updating a percpu map, bpftool currently copies the provided
value only into the first per CPU copy of the specified value,
all others instances are left zeroed.

This change explicitly copies the user-provided bytes to all the
per CPU instances, keeping the sub-command syntax unchanged.

v2 -> v3:
 - drop unused argument, as per Quentin's suggestion
v1 -> v2:
 - rename the helper as per Quentin's suggestion

Fixes: 71bb428fe2 ("tools: bpf: add bpftool")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-23 09:56:20 +01:00
Jiri Olsa 752bcf80f5 bpftool: Fix prog dump by tag
Lance reported an issue with bpftool not being able to
dump program if there are more programs loaded and you
want to dump any but the first program, like:

  # bpftool prog
  28: kprobe  name trace_req_start  tag 1dfc28ba8b3dd597  gpl
  	loaded_at 2019-01-18T17:02:40+1100  uid 0
  	xlated 112B  jited 109B  memlock 4096B  map_ids 13
  29: kprobe  name trace_req_compl  tag 5b6a5ecc6030a683  gpl
  	loaded_at 2019-01-18T17:02:40+1100  uid 0
  	xlated 928B  jited 575B  memlock 4096B  map_ids 13,14
  #  bpftool prog dum jited tag 1dfc28ba8b3dd597
   0:	push   %rbp
   1:	mov    %rsp,%rbp
  ...

  #  bpftool prog dum jited tag 5b6a5ecc6030a683
  Error: can't get prog info (29): Bad address

The problem is in the prog_fd_by_tag function not cleaning
the struct bpf_prog_info before another request, so the
previous program length is still in there and kernel assumes
it needs to dump the program, which fails because there's no
user pointer set.

Moving the struct bpf_prog_info declaration into the loop,
so it gets cleaned before each query.

Fixes: 71bb428fe2 ("tools: bpf: add bpftool")
Reported-by: Lance Digby <ldigby@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-23 09:52:12 +01:00
Quentin Monnet 948703e808 tools: bpftool: add bash completion for bpftool probes
Add the bash completion related to the newly introduced "bpftool feature
probe" command.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-22 22:15:40 -08:00
Quentin Monnet f9499fedf2 tools: bpftool: add probes for a network device
bpftool gained support for probing the current system in order to see
what program and map types, and what helpers are available on that
system. This patch adds the possibility to pass an interface index to
libbpf (and hence to the kernel) when trying to load the programs or to
create the maps, in order to see what items a given network device can
support.

A new keyword "dev <ifname>" can be used as an alternative to "kernel"
to indicate that the given device should be tested. If no target ("dev"
or "kernel") is specified bpftool defaults to probing the kernel.

Sample output:

    # bpftool -p feature probe dev lo
    {
        "syscall_config": {
            "have_bpf_syscall": true
        },
        "program_types": {
            "have_sched_cls_prog_type": false,
            "have_xdp_prog_type": false
        },
        ...
    }

As the target is a network device, /proc/ parameters and kernel
configuration are NOT dumped. Availability of the bpf() syscall is
still probed, so we can return early if that syscall is not usable
(since there is no point in attempting the remaining probes in this
case).

Among the program types, only the ones that can be offloaded are probed.
All map types are probed, as there is no specific rule telling which one
could or could not be supported by a device in the future. All helpers
are probed (but only for offload-able program types).

Caveat: as bpftool does not attempt to attach programs to the device at
the moment, probes do not entirely reflect what the device accepts:
typically, for Netronome's nfp, results will announce that TC cls
offload is available even if support has been deactivated (with e.g.
ethtool -K eth1 hw-tc-offload off).

v2:
- All helpers are probed, whereas previous version would only probe the
  ones compatible with an offload-able program type. This is because we
  do not keep a default compatible program type for each helper anymore.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-22 22:15:40 -08:00
Quentin Monnet d267cff467 tools: bpftool: add C-style "#define" output for probes
Make bpftool able to dump a subset of the parameters collected by
probing the system as a listing of C-style #define macros, so that
external projects can reuse the result of this probing and build
BPF-based project in accordance with the features available on the
system.

The new "macros" keyword is used to select this output. An additional
"prefix" keyword is added so that users can select a custom prefix for
macro names, in order to avoid any namespace conflict.

Sample output:

    # bpftool feature probe kernel macros prefix FOO_
    /*** System call availability ***/
    #define FOO_HAVE_BPF_SYSCALL

    /*** eBPF program types ***/
    #define FOO_HAVE_SOCKET_FILTER_PROG_TYPE
    #define FOO_HAVE_KPROBE_PROG_TYPE
    #define FOO_HAVE_SCHED_CLS_PROG_TYPE
    ...

    /*** eBPF map types ***/
    #define FOO_HAVE_HASH_MAP_TYPE
    #define FOO_HAVE_ARRAY_MAP_TYPE
    #define FOO_HAVE_PROG_ARRAY_MAP_TYPE
    ...

    /*** eBPF helper functions ***/
    /*
     * Use FOO_HAVE_PROG_TYPE_HELPER(prog_type_name, helper_name)
     * to determine if <helper_name> is available for <prog_type_name>,
     * e.g.
     *      #if FOO_HAVE_PROG_TYPE_HELPER(xdp, bpf_redirect)
     *              // do stuff with this helper
     *      #elif
     *              // use a workaround
     *      #endif
     */
    #define FOO_HAVE_PROG_TYPE_HELPER(prog_type, helper)        \
            FOO_BPF__PROG_TYPE_ ## prog_type ## __HELPER_ ## helper
    ...
    #define FOO_BPF__PROG_TYPE_socket_filter__HELPER_bpf_probe_read 0
    #define FOO_BPF__PROG_TYPE_socket_filter__HELPER_bpf_ktime_get_ns 1
    #define FOO_BPF__PROG_TYPE_socket_filter__HELPER_bpf_trace_printk 1
    ...

v3:
- Change output for helpers again: add a
  HAVE_PROG_TYPE_HELPER(type, helper) macro that can be used to tell
  if <helper> is available for program <type>.

v2:
- #define-based output added as a distinct patch.
- "HAVE_" prefix appended to macro names.
- Output limited to bpf() syscall availability, BPF prog and map types,
  helper functions. In this version kernel config options, procfs
  parameter or kernel version are intentionally left aside.
- Following the change on helper probes, format for helper probes in
  this output style has changed (now a list of compatible program
  types).

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-22 22:15:40 -08:00
Quentin Monnet 2d3ea5e85d tools: bpftool: add probes for eBPF helper functions
Similarly to what was done for program types and map types, add a set of
probes to test the availability of the different eBPF helper functions
on the current system.

For each known program type, all known helpers are tested, in order to
establish a compatibility matrix. Output is provided as a set of lists
of available helpers, one per program type.

Sample output:

    # bpftool feature probe kernel
    ...
    Scanning eBPF helper functions...
    eBPF helpers supported for program type socket_filter:
            - bpf_map_lookup_elem
            - bpf_map_update_elem
            - bpf_map_delete_elem
    ...
    eBPF helpers supported for program type kprobe:
            - bpf_map_lookup_elem
            - bpf_map_update_elem
            - bpf_map_delete_elem
    ...

    # bpftool --json --pretty feature probe kernel
    {
        ...
        "helpers": {
            "socket_filter_available_helpers": ["bpf_map_lookup_elem", \
                    "bpf_map_update_elem","bpf_map_delete_elem", ...
            ],
            "kprobe_available_helpers": ["bpf_map_lookup_elem", \
                    "bpf_map_update_elem","bpf_map_delete_elem", ...
            ],
            ...
        }
    }

v5:
- In libbpf.map, move global symbol to the new LIBBPF_0.0.2 section.

v4:
- Use "enum bpf_func_id" instead of "__u32" in bpf_probe_helper()
  declaration for the type of the argument used to pass the id of
  the helper to probe.
- Undef BPF_HELPER_MAKE_ENTRY after using it.

v3:
- Do not pass kernel version from bpftool to libbpf probes (kernel
  version for testing program with kprobes is retrieved directly from
  libbpf).
- Dump one list of available helpers per program type (instead of one
  list of compatible program types per helper).

v2:
- Move probes from bpftool to libbpf.
- Test all program types for each helper, print a list of working prog
  types for each helper.
- Fall back on include/uapi/linux/bpf.h for names and ids of helpers.
- Remove C-style macros output from this patch.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-22 22:15:40 -08:00
Quentin Monnet f99e166397 tools: bpftool: add probes for eBPF map types
Add new probes for eBPF map types, to detect what are the ones available
on the system. Try creating one map of each type, and see if the kernel
complains.

Sample output:

    # bpftool feature probe kernel
    ...
    Scanning eBPF map types...
    eBPF map_type hash is available
    eBPF map_type array is available
    eBPF map_type prog_array is available
    ...

    # bpftool --json --pretty feature probe kernel
    {
        ...
        "map_types": {
            "have_hash_map_type": true,
            "have_array_map_type": true,
            "have_prog_array_map_type": true,
            ...
        }
    }

v5:
- In libbpf.map, move global symbol to the new LIBBPF_0.0.2 section.

v3:
- Use a switch with all enum values for setting specific map parameters,
  so that gcc complains at compile time (-Wswitch-enum) if new map types
  were added to the kernel but libbpf was not updated.

v2:
- Move probes from bpftool to libbpf.
- Remove C-style macros output from this patch.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-22 22:15:40 -08:00
Quentin Monnet 1bf4b05810 tools: bpftool: add probes for eBPF program types
Introduce probes for supported BPF program types in libbpf, and call it
from bpftool to test what types are available on the system. The probe
simply consists in loading a very basic program of that type and see if
the verifier complains or not.

Sample output:

    # bpftool feature probe kernel
    ...
    Scanning eBPF program types...
    eBPF program_type socket_filter is available
    eBPF program_type kprobe is available
    eBPF program_type sched_cls is available
    ...

    # bpftool --json --pretty feature probe kernel
    {
        ...
        "program_types": {
            "have_socket_filter_prog_type": true,
            "have_kprobe_prog_type": true,
            "have_sched_cls_prog_type": true,
            ...
        }
    }

v5:
- In libbpf.map, move global symbol to a new LIBBPF_0.0.2 section.
- Rename (non-API function) prog_load() as probe_load().

v3:
- Get kernel version for checking kprobes availability from libbpf
  instead of from bpftool. Do not pass kernel_version as an argument
  when calling libbpf probes.
- Use a switch with all enum values for setting specific program
  parameters just before probing, so that gcc complains at compile time
  (-Wswitch-enum) if new prog types were added to the kernel but libbpf
  was not updated.
- Add a comment in libbpf.h about setrlimit() usage to allow many
  consecutive probe attempts.

v2:
- Move probes from bpftool to libbpf.
- Remove C-style macros output from this patch.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-22 22:15:40 -08:00
Quentin Monnet 4567b983f7 tools: bpftool: add probes for kernel configuration options
Add probes to dump a number of options set (or not set) for compiling
the kernel image. These parameters provide information about what BPF
components should be available on the system. A number of them are not
directly related to eBPF, but are in fact used in the kernel as
conditions on which to compile, or not to compile, some of the eBPF
helper functions.

Sample output:

    # bpftool feature probe kernel
    Scanning system configuration...
    ...
    CONFIG_BPF is set to y
    CONFIG_BPF_SYSCALL is set to y
    CONFIG_HAVE_EBPF_JIT is set to y
    ...

    # bpftool --pretty --json feature probe kernel
    {
        "system_config": {
            ...
            "CONFIG_BPF": "y",
            "CONFIG_BPF_SYSCALL": "y",
            "CONFIG_HAVE_EBPF_JIT": "y",
            ...
        }
    }

v5:
- Declare options[] array in probe_kernel_image_config() as static.

v4:
- Add some options to the list:
    - CONFIG_TRACING
    - CONFIG_KPROBE_EVENTS
    - CONFIG_UPROBE_EVENTS
    - CONFIG_FTRACE_SYSCALLS
- Add comments about those options in the source code.

v3:
- Add a comment about /proc/config.gz not being supported as a path for
  the config file at this time.
- Use p_info() instead of p_err() on failure to get options from config
  file, as bpftool keeps probing other parameters and that would
  possibly create duplicate "error" entries for JSON.

v2:
- Remove C-style macros output from this patch.
- NOT addressed: grouping of those config options into subsections
  (I don't see an easy way of grouping them at the moment, please see
  also the discussion on v1 thread).

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-22 22:15:40 -08:00
Quentin Monnet 7a4522bbef tools: bpftool: add probes for /proc/ eBPF parameters
Add a set of probes to dump the eBPF-related parameters available from
/proc/: availability of bpf() syscall for unprivileged users,
JIT compiler status and hardening status, kallsyms exports status.

Sample output:

    # bpftool feature probe kernel
    Scanning system configuration...
    bpf() syscall for unprivileged users is enabled
    JIT compiler is disabled
    JIT compiler hardening is disabled
    JIT compiler kallsyms exports are disabled
    Global memory limit for JIT compiler for unprivileged users \
            is 264241152 bytes
    ...

    # bpftool --json --pretty feature probe kernel
    {
        "system_config": {
            "unprivileged_bpf_disabled": 0,
            "bpf_jit_enable": 0,
            "bpf_jit_harden": 0,
            "bpf_jit_kallsyms": 0,
            "bpf_jit_limit": 264241152
        },
        ...
    }

These probes are skipped if procfs is not mounted.

v4:
- Add bpf_jit_limit parameter.

v2:
- Remove C-style macros output from this patch.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-22 22:15:40 -08:00
Quentin Monnet 49eb7ab3b2 tools: bpftool: add basic probe capability, probe syscall availability
Add a new component and command for bpftool, in order to probe the
system to dump a set of eBPF-related parameters so that users can know
what features are available on the system.

Parameters are dumped in plain or JSON output (with -j/-p options).

The current patch introduces probing of one simple parameter:
availability of the bpf() system call. Later commits
will add other probes.

Sample output:

    # bpftool feature probe kernel
    Scanning system call availability...
    bpf() syscall is available

    # bpftool --json --pretty feature probe kernel
    {
        "syscall_config": {
            "have_bpf_syscall": true
        }
    }

The optional "kernel" keyword enforces probing of the current system,
which is the only possible behaviour at this stage. It can be safely
omitted.

The feature comes with the relevant man page, but bash completion will
come in a dedicated commit.

v3:
- Do not probe kernel version. Contrarily to what is written below for
  v2, we can have the kernel version retrieved in libbpf instead of
  bpftool (in the patch adding probing for program types).

v2:
- Remove C-style macros output from this patch.
- Even though kernel version is no longer needed for testing kprobes
  availability, note that we still collect it in this patch so that
  bpftool gets able to probe (in next patches) older kernels as well.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-22 22:15:40 -08:00
Thomas Gleixner 64cf548126 tools: bpftool: Cleanup license mess
Precise and non-ambiguous license information is important. The recent
relicensing of the bpftools introduced a license conflict.

The files have now:

     SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause

and

     * This program is free software; you can redistribute it and/or
     * modify it under the terms of the GNU General Public License
     * as published by the Free Software Foundation; either version
     * 2 of the License, or (at your option) any later version

Amazingly about 20 people acked that change and neither they nor the
committer noticed. Oh well.

Digging deeper: The files were imported from the iproute2 repository with
the GPL V2 or later boiler plate text in commit b66e907cfe ("tools:
bpftool: copy JSON writer from iproute2 repository")

Looking at the iproute2 repository at

  git://git.kernel.org/pub/scm/network/iproute2/iproute2.git

the following commit is the equivivalent:

  commit d9d8c839 ("json_writer: add SPDX Identifier (GPL-2/BSD-2)")

That commit explicitly removes the boiler plate and relicenses the code
uner GPL-2.0-only and BSD-2-Clause. As Steven wrote the original code and
also the relicensing commit, it's assumed that the relicensing was intended
to do exaclty that. Just the kernel side update failed to remove the boiler
plate. Do so now.

Fixes: 907b223651 ("tools: bpftool: dual license all files")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Sean Young <sean@mess.org>
Cc: Jiri Benc <jbenc@redhat.com>
Cc: David Calavera <david.calavera@gmail.com>
Cc: Andrey Ignatov <rdna@fb.com>
Cc: Joe Stringer <joe@wand.net.nz>
Cc: David Ahern <dsahern@gmail.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Petar Penkov <ppenkov@stanford.edu>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
CC: okash.khawaja@gmail.com
Cc: netdev@vger.kernel.org
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-01-18 15:26:54 -08:00
Stanislav Fomichev 55c70bffc7 bpftool: add bash completion for peek/push/enqueue/pop/dequeue
bpftool map peek id <TAB>      - suggests only queue and stack map ids
bpftool map pop id <TAB>       - suggests only stack map ids
bpftool map dequeue id <TAB>   - suggests only queue map ids

bpftool map push id <TAB>      - suggests only stack map ids
bpftool map enqueue id <TAB>   - suggests only queue map ids

bpftool map push id 1 <TAB>    - suggests 'value', not 'key'
bpftool map enqueue id 2 <TAB> - suggests 'value', not 'key'

bpftool map update id <stack/queue type> - suggests 'value', not 'key'
bpftool map lookup id <stack/queue type> - suggests nothing

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-17 10:30:32 +01:00