Commit Graph

18 Commits

Author SHA1 Message Date
James Bottomley ebd09ec93c [SCSI] attirbute_container: Initialize sysfs attributes with sysfs_attr_init
All of the SCSI transport classes are suddenly spitting lockdep
warnings.  According to Eric Biderman this is because lockdep needs
static initialisers and the attribute container way of doing things
end up with dynamic sysfs attributes.  Fix this by calling
sysfs_attr_init which sets the lockdep key correctly.

Tested-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-27 15:15:24 -04:00
Kay Sievers 1e0b2cf933 driver core: struct device - replace bus_id with dev_name(), dev_set_name()
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06 10:44:31 -08:00
Tony Jones ee959b00c3 SCSI: convert struct class_device to struct device
It's big, but there doesn't seem to be a way to split it up smaller...

Signed-off-by: Tony Jones <tonyj@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19 19:10:33 -07:00
Linus Torvalds 9b73e76f3c Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (200 commits)
  [SCSI] usbstorage: use last_sector_bug flag universally
  [SCSI] libsas: abstract STP task status into a function
  [SCSI] ultrastor: clean up inline asm warnings
  [SCSI] aic7xxx: fix firmware build
  [SCSI] aacraid: fib context lock for management ioctls
  [SCSI] ch: remove forward declarations
  [SCSI] ch: fix device minor number management bug
  [SCSI] ch: handle class_device_create failure properly
  [SCSI] NCR5380: fix section mismatch
  [SCSI] sg: fix /proc/scsi/sg/devices when no SCSI devices
  [SCSI] IB/iSER: add logical unit reset support
  [SCSI] don't use __GFP_DMA for sense buffers if not required
  [SCSI] use dynamically allocated sense buffer
  [SCSI] scsi.h: add macro for enclosure bit of inquiry data
  [SCSI] sd: add fix for devices with last sector access problems
  [SCSI] fix pcmcia compile problem
  [SCSI] aacraid: add Voodoo Lite class of cards.
  [SCSI] aacraid: add new driver features flags
  [SCSI] qla2xxx: Update version number to 8.02.00-k7.
  [SCSI] qla2xxx: Issue correct MBC_INITIALIZE_FIRMWARE command.
  ...
2008-01-25 17:19:08 -08:00
Denis Cheng db1118a460 Driver core: use LIST_HEAD instead of call to INIT_LIST_HEAD in __init
LIST_HEAD has been widely used, so switch to this simpler method.

Signed-off-by: Denis Cheng <crquan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:41 -08:00
James Bottomley fd1109711d [SCSI] attribute_container: update to use the group interface
This patch is the beginning of moving the attribute_containers to use
attribute groups exclusively.  The attr element is now deprecated and
will eventually be removed (along with all the hand rolled code for
doing exactly what attribute groups do) when all the consumers are
converted to attribute groups.

Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23 11:29:17 -06:00
Michael S. Tsirkin f8916c11a4 Driver core: include linux/mutex.h from attribute_container.c
attribute_container.c uses DEFINE_MUTEX, so while
linux/mutex.h seems to be pulled in indirectly
by one of the headers it includes, the right thing
is to include linux/mutex.h directly.

Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
2007-07-11 16:09:01 -07:00
Matthias Kaehlcke 61a2f59af6 drivers/base/attribute_container.c: use mutex instead of binary semaphore
use mutex instead of binary semaphore in
drivers/base/attribute_container.c

Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 10:57:34 -07:00
Greg Kroah-Hartman 1740757e8f [PATCH] Driver Core: remove unused exports
Cc: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 12:40:48 -07:00
Ben Dooks a1bdc7aad8 [PATCH] drivers/base - fix sparse warnings
There are a number of sparse warnings from the latest sparse
snapshot being generated from the drivers/base build. The
main culprits are due to the initialisation functions not
being declared in a header file.

Also, the firmware.c file should include <linux/device.h>
to get the prototype of  firmware_register() and
firmware_unregister().

This patch moves the init function declerations from the
init.c file to the base.h, and ensures it is included in
all the relevant c sources. It also adds <linux/device.h>
to the included headers for firmware.c.

The patch does not solve all the sparse errors generated,
but reduces the count significantly.

drivers/base/core.c:161:1: warning: symbol 'devices_subsys' was not declared. Should it be static?
drivers/base/core.c:417:12: warning: symbol 'devices_init' was not declared. Should it be static?
drivers/base/sys.c:253:6: warning: symbol 'sysdev_shutdown' was not declared. Should it be static?
drivers/base/sys.c:326:5: warning: symbol 'sysdev_suspend' was not declared. Should it be static?
drivers/base/sys.c:428:5: warning: symbol 'sysdev_resume' was not declared. Should it be static?
drivers/base/sys.c:450:12: warning: symbol 'system_bus_init' was not declared. Should it be static?
drivers/base/bus.c:133:1: warning: symbol 'bus_subsys' was not declared. Should it be static?
drivers/base/bus.c:667:12: warning: symbol 'buses_init' was not declared. Should it be static?
drivers/base/class.c:759:12: warning: symbol 'classes_init' was not declared. Should it be static?
drivers/base/platform.c:313:12: warning: symbol 'platform_bus_init' was not declared. Should it be static?
drivers/base/cpu.c:110:12: warning: symbol 'cpu_dev_init' was not declared. Should it be static?
drivers/base/firmware.c:17:5: warning: symbol 'firmware_register' was not declared. Should it be static?
drivers/base/firmware.c:23:6: warning: symbol 'firmware_unregister' was not declared. Should it be static?
drivers/base/firmware.c:28:12: warning: symbol 'firmware_init' was not declared. Should it be static?
drivers/base/init.c:28:13: warning: symbol 'driver_init' was not declared. Should it be static?
drivers/base/dmapool.c:174:10: warning: implicit cast from nocast type
drivers/base/attribute_container.c:439:1: warning: symbol 'attribute_container_init' was not declared. Should it be static?
drivers/base/power/runtime.c:76:6: warning: symbol 'dpm_set_power_state' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28 09:52:55 -07:00
Jiri Slaby 4aed0644d6 [PATCH] drivers/base/*: use kzalloc instead of kmalloc+memset
Fixes a bunch of memset bugs too.

Signed-off-by: Lion Vollnhals <webmaster@schiggl.de>
Signed-off-by: Jiri Slaby <xslaby@fi.muni.cz>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 08:22:27 -07:00
Linus Torvalds caf39e87cc [SCSI] Re-do "final klist fixes"
With the previous commit that introduces the klist enhancements, we can
now re-do 2b7d6a8cb9 again.
2005-09-07 18:44:33 -07:00
Linus Torvalds df4edad178 [SCSI] Revert "final klist fixes"
Revert commit 2b7d6a8cb9.

The "fix" was known to not even compile.  Duh.  That's not a fix.
That's just stupid.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 17:50:58 -07:00
James Bottomley 2b7d6a8cb9 [SCSI] attribute container final klist fixes
Since the attribute container deletes from a klist while it's walking
it, it is vulnerable to the problem (and fix) here:

http://marc.theaimsgroup.com/?l=linux-scsi&m=112485448830217

The attached fixes this (but won't compile without the above).

It also fixes the logical reversal in the traversal loop which meant
that we were never actually traversing the loop to hit this bug in the
first place.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-30 22:44:32 -05:00
James Bottomley 53c165e0a6 [SCSI] correct attribute_container list usage
One of the changes in the attribute_container code in the scsi-misc tree
was to add a lock to protect the list of devices per container.  This,
unfortunately, leads to potential scheduling while atomic problems if
there's a sleep in the function called by a trigger.

The correct solution is to use the kernel klist infrastructure instead
which allows lockless traversal of a list.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-30 22:44:20 -05:00
James Bottomley ebd8bb7647 [SCSI] fix transport class corner case after rework
If your transport class sets the ATTRIBUTE_CONTAINER_NO_CLASSDEVS flag,
then its configure method never gets called.  This patch fixes that so
that the configure method is called with a NULL classdev.

Also remove a spurious inverted comma in the transport_class comments.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-28 11:14:06 -05:00
James Bottomley d0a7e57400 [SCSI] correct transport class abstraction to work outside SCSI
I recently tried to construct a totally generic transport class and
found there were certain features missing from the current abstract
transport class.  Most notable is that you have to hang the data on the
class_device but most of the API is framed in terms of the generic
device, not the class_device.

These changes are two fold

- Provide the class_device to all of the setup and configure APIs
- Provide and extra API to take the device and the attribute class and
  return the corresponding class_device

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-14 17:21:27 -05:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00