Commit Graph

232 Commits

Author SHA1 Message Date
Mike Galbraith 77ae651347 sched: fix mysql+oltp regression
Defer commit 6d299f1b53 to the next release.

Testing of the tip/sched/clock tree revealed a mysql+oltp regression
which bisection eventually traced back to this commit in mainline.

Pertinent test results:  Three run sysbench averages, throughput units
in read/write requests/sec.

clients         1     2     4     8    16    32    64
6e0534f      9646 17876 34774 33868 32230 30767 29441
2.6.26.1     9112 17936 34652 33383 31929 30665 29232
6d299f1      9112 14637 28370 33339 32038 30762 29204

Note: subsequent commits hide the majority of this regression until you
apply the clock fixes, at which time it reemerges at full magnitude.

We cannot see anything bad about the change itself so we defer it to the
next release until this problem is fully analysed.

Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Gregory Haskins <ghaskins@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-11 14:49:29 +02:00
Peter Zijlstra 157124c11f sched: fix warning in hrtick_start_fair()
Benjamin Herrenschmidt reported:

> I get that on ppc64 ...
>
> In file included from kernel/sched.c:1595:
> kernel/sched_fair.c: In function ‘hrtick_start_fair’:
> kernel/sched_fair.c:902: warning: comparison of distinct pointer types lacks a cast
>
> Probably harmless but annoying.

s64 delta = slice - ran;

-->	delta = max(10000LL, delta);

Probably ppc64's s64 is long vs long long..

I think hpa was looking at sanitizing all these 64bit types across the
architectures.

Use max_t with an explicit type meanwhile.

Reported-by: Benjamin Herrenschmid <benh@kernel.crashing.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-28 12:01:58 +02:00
Linus Torvalds 7f9dce3837 Merge branch 'sched/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: hrtick_enabled() should use cpu_active()
  sched, x86: clean up hrtick implementation
  sched: fix build error, provide partition_sched_domains() unconditionally
  sched: fix warning in inc_rt_tasks() to not declare variable 'rq' if it's not needed
  cpu hotplug: Make cpu_active_map synchronization dependency clear
  cpu hotplug, sched: Introduce cpu_active_map and redo sched domain managment (take 2)
  sched: rework of "prioritize non-migratable tasks over migratable ones"
  sched: reduce stack size in isolated_cpu_setup()
  Revert parts of "ftrace: do not trace scheduler functions"

Fixed up conflicts in include/asm-x86/thread_info.h (due to the
TIF_SINGLESTEP unification vs TIF_HRTICK_RESCHED removal) and
kernel/sched_fair.c (due to cpu_active_map vs for_each_cpu_mask_nr()
introduction).
2008-07-23 19:36:53 -07:00
Ingo Molnar d986434a7d Merge branch 'sched/urgent' into sched/devel 2008-07-20 11:01:29 +02:00
Peter Zijlstra 31656519e1 sched, x86: clean up hrtick implementation
random uvesafb failures were reported against Gentoo:

  http://bugs.gentoo.org/show_bug.cgi?id=222799

and Mihai Moldovan bisected it back to:

> 8f4d37ec07 is first bad commit
> commit 8f4d37ec07
> Author: Peter Zijlstra <a.p.zijlstra@chello.nl>
> Date:   Fri Jan 25 21:08:29 2008 +0100
>
>    sched: high-res preemption tick

Linus suspected it to be hrtick + vm86 interaction and observed:

> Btw, Peter, Ingo: I think that commit is doing bad things. They aren't
> _incorrect_ per se, but they are definitely bad.
>
> Why?
>
> Using random _TIF_WORK_MASK flags is really impolite for doing
> "scheduling" work. There's a reason that arch/x86/kernel/entry_32.S
> special-cases the _TIF_NEED_RESCHED flag: we don't want to exit out of
> vm86 mode unnecessarily.
>
> See the "work_notifysig_v86" label, and how it does that
> "save_v86_state()" thing etc etc.

Right, I never liked having to fiddle with those TIF flags. Initially I
needed it because the hrtimer base lock could not nest in the rq lock.
That however is fixed these days.

Currently the only reason left to fiddle with the TIF flags is remote
wakeups. We cannot program a remote cpu's hrtimer. I've been thinking
about using the new and improved IPI function call stuff to implement
hrtimer_start_on().

However that does require that smp_call_function_single(.wait=0) works
from interrupt context - /me looks at the latest series from Jens - Yes
that does seem to be supported, good.

Here's a stab at cleaning this stuff up ...

Mihai reported test success as well.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Mihai Moldovan <ionic@ionic.de>
Cc: Michal Januszewski <spock@gentoo.org>
Cc: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-20 10:37:28 +02:00
Max Krasnyansky e761b77252 cpu hotplug, sched: Introduce cpu_active_map and redo sched domain managment (take 2)
This is based on Linus' idea of creating cpu_active_map that prevents
scheduler load balancer from migrating tasks to the cpu that is going
down.

It allows us to simplify domain management code and avoid unecessary
domain rebuilds during cpu hotplug event handling.

Please ignore the cpusets part for now. It needs some more work in order
to avoid crazy lock nesting. Although I did simplfy and unify domain
reinitialization logic. We now simply call partition_sched_domains() in
all the cases. This means that we're using exact same code paths as in
cpusets case and hence the test below cover cpusets too.
Cpuset changes to make rebuild_sched_domains() callable from various
contexts are in the separate patch (right next after this one).

This not only boots but also easily handles
	while true; do make clean; make -j 8; done
and
	while true; do on-off-cpu 1; done
at the same time.
(on-off-cpu 1 simple does echo 0/1 > /sys/.../cpu1/online thing).

Suprisingly the box (dual-core Core2) is quite usable. In fact I'm typing
this on right now in gnome-terminal and things are moving just fine.

Also this is running with most of the debug features enabled (lockdep,
mutex, etc) no BUG_ONs or lockdep complaints so far.

I believe I addressed all of the Dmitry's comments for original Linus'
version. I changed both fair and rt balancer to mask out non-active cpus.
And replaced cpu_is_offline() with !cpu_active() in the main scheduler
code where it made sense (to me).

Signed-off-by: Max Krasnyanskiy <maxk@qualcomm.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Gregory Haskins <ghaskins@novell.com>
Cc: dmitry.adamushko@gmail.com
Cc: pj@sgi.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 13:22:25 +02:00
Ingo Molnar 82638844d9 Merge branch 'linus' into cpus4096
Conflicts:

	arch/x86/xen/smp.c
	kernel/sched_rt.c
	net/iucv/iucv.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-16 00:29:07 +02:00
Ingo Molnar 68083e05d7 Merge commit 'v2.6.26-rc9' into cpus4096 2008-07-06 14:23:39 +02:00
Gregory Haskins 2087a1ad82 sched: add avg-overlap support to RT tasks
We have the notion of tracking process-coupling (a.k.a. buddy-wake) via
the p->se.last_wake / p->se.avg_overlap facilities, but it is only used
for cfs to cfs interactions.  There is no reason why an rt to cfs
interaction cannot share in establishing a relationhip in a similar
manner.

Because PREEMPT_RT runs many kernel threads as FIFO priority, we often
times have heavy interaction between RT threads waking CFS applications.
This patch offers a substantial boost (50-60%+) in perfomance under those
circumstances.

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Cc: npiggin@suse.de
Cc: rostedt@goodmis.org
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-04 12:50:22 +02:00
Dhaval Giani 55e12e5e7b sched: make sched_{rt,fair}.c ifdefs more readable
Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:32:05 +02:00
Peter Zijlstra f5bfb7d9ff sched: bias effective_load() error towards failing wake_affine().
Measurement shows that the difference between cgroup:/ and cgroup:/foo
wake_affine() results is that the latter succeeds significantly more.

Therefore bias the calculations towards failing the test.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:47 +02:00
Peter Zijlstra f1d239f732 sched: incremental effective_load()
Increase the accuracy of the effective_load values.

Not only consider the current increment (as per the attempted wakeup), but
also consider the delta between when we last adjusted the shares and the
current situation.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:47 +02:00
Peter Zijlstra 83378269a5 sched: correct wakeup weight calculations
rw_i = {2, 4, 1, 0}
s_i = {2/7, 4/7, 1/7, 0}

wakeup on cpu0, weight=1

rw'_i = {3, 4, 1, 0}
s'_i = {3/8, 4/8, 1/8, 0}

s_0 = S * rw_0 / \Sum rw_j ->
  \Sum rw_j = S*rw_0/s_0 = 1*2*7/2 = 7 (correct)

s'_0 = S * (rw_0 + 1) / (\Sum rw_j + 1) =
       1 * (2+1) / (7+1) = 3/8 (correct

so we find that adding 1 to cpu0 gains 5/56 in weight
if say the other cpu were, cpu1, we'd also have to calculate its 4/56 loss

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:46 +02:00
Srivatsa Vaddagiri 243e0e7b7d sched: fix mult overflow
It was observed these mults can overflow.

Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:45 +02:00
Peter Zijlstra cb5ef42a03 sched: optimize effective_load()
s_i = S * rw_i / \Sum_j rw_j

 -> \Sum_j rw_j = S * rw_i / s_i

 -> s'_i = S * (rw_i + w) / (\Sum_j rw_j + w)

delta s = s' - s = S * (rw + w) / ((S * rw / s) + w)
        = s * (S * (rw + w) / (S * rw + s * w) - 1)

 a = S*(rw+w), b = S*rw + s*w

delta s = s * (a-b) / b

IOW, trade one divide for two multiplies

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:43 +02:00
Peter Zijlstra 4be9daaa1b sched: fix task_h_load()
Currently task_h_load() computes the load of a task and uses that to either
subtract it from the total, or add to it.

However, removing or adding a task need not have any effect on the total load
at all. Imagine adding a task to a group that is local to one cpu - in that
case the total load of that cpu is unaffected.

So properly compute addition/removal:

 s_i = S * rw_i / \Sum_j rw_j
 s'_i = S * (rw_i + wl) / (\Sum_j rw_j + wg)

then s'_i - s_i gives the change in load.

Where s_i is the shares for cpu i, S the group weight, rw_i the runqueue weight
for that cpu, wl the weight we add (subtract) and wg the weight contribution to
the runqueue.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:42 +02:00
Peter Zijlstra 42a3ac7d5c sched: fix load scaling in group balancing
doing the load balance will change cfs_rq->load.weight (that's the whole point)
but since that's part of the scale factor, we'll scale back with a different
amount.

Weight getting smaller would result in an inflated moved_load which causes
it to stop balancing too soon.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:41 +02:00
Peter Zijlstra bb3469ac9b sched: hierarchical load vs affine wakeups
With hierarchical grouping we can't just compare task weight to rq weight - we
need to scale the weight appropriately.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:40 +02:00
Peter Zijlstra c8cba857b4 sched: simplify the group load balancer
While thinking about the previous patch - I realized that using per domain
aggregate load values in load_balance_fair() is wrong. We should use the
load value for that CPU.

By not needing per domain hierarchical load values we don't need to store
per domain aggregate shares, which greatly simplifies all the math.

It basically falls apart in two separate computations:
 - per domain update of the shares
 - per CPU update of the hierarchical load

Also get rid of the move_group_shares() stuff - just re-compute the shares
again after a successful load balance.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:36 +02:00
Peter Zijlstra a25b5aca87 sched: no need to aggregate task_weight
We only need to know the task_weight of the busiest rq - nothing to do
if there are no tasks there.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:35 +02:00
Srivatsa Vaddagiri 53fecd8ae1 sched: kill task_group balancing
The idea was to balance groups until we've reached the global goal, however
Vatsa rightly pointed out that we might never reach that goal this way -
hence take out this logic.

[ the initial rationale for this 'feature' was to promote max concurrency
  within a group - it does not however affect fairness ]

Reported-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:33 +02:00
Peter Zijlstra b6a86c746f sched: fix sched_domain aggregation
Keeping the aggregate on the first cpu of the sched domain has two problems:
 - it could collide between different sched domains on different cpus
 - it could slow things down because of the remote accesses

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:32 +02:00
Peter Zijlstra 103638d95b sched: fix wakeup granularity and buddy granularity
Uncouple buddy selection from wakeup granularity.

The initial idea was that buddies could run ahead as far as a normal task
can - do this by measuring a pair 'slice' just as we do for a normal task.

This means we can drop the wakeup_granularity back to 5ms.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:31 +02:00
Peter Zijlstra c09595f63b sched: revert revert of: fair-group: SMP-nice for group scheduling
Try again..

Initial commit: 18d95a2832
Revert: 6363ca57c7

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:29 +02:00
Peter Zijlstra ced8aa16e1 sched: fix calc_delta_asym, #2
Ok, so why are we in this mess, it was:

  1/w

but now we mixed that rw in the mix like:

 rw/w

rw being \Sum w suggests: fiddling w, we should also fiddle rw, humm?

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:28 +02:00
Peter Zijlstra c9c294a630 sched: fix calc_delta_asym()
calc_delta_asym() is supposed to do the same as calc_delta_fair() except
linearly shrink the result for negative nice processes - this causes them
to have a smaller preemption threshold so that they are more easily preempted.

The problem is that for task groups se->load.weight is the per cpu share of
the actual task group weight; take that into account.

Also provide a debug switch to disable the asymmetry (which I still don't
like - but it does greatly benefit some workloads)

This would explain the interactivity issues reported against group scheduling.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:28 +02:00
Peter Zijlstra a7be37ac8e sched: revert the revert of: weight calculations
Try again..

initial commit: 8f1bc385cf
revert: f9305d4a09

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-27 14:31:27 +02:00
Gregory Haskins 6d299f1b53 sched: fix SCHED_OTHER balance iterator to include all tasks
The currently logic inadvertently skips the last task on the run-queue,
resulting in missed balance opportunities.

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Signed-off-by: David Bahi <dbahi@novell.com>
CC: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-06-06 15:19:29 +02:00
Mike Galbraith b3137bc8e7 sched: stop wake_affine from causing serious imbalance
Prevent short-running wakers of short-running threads from overloading a single
cpu via wakeup affinity, and wire up disconnected debug option.

Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-29 11:29:20 +02:00
Ingo Molnar 6363ca57c7 revert ("sched: fair-group: SMP-nice for group scheduling")
Yanmin Zhang reported:

Comparing with 2.6.25, volanoMark has big regression with kernel 2.6.26-rc1.
It's about 50% on my 8-core stoakley, 16-core tigerton, and Itanium Montecito.

With bisect, I located the following patch:

| 18d95a2832 is first bad commit
| commit 18d95a2832
| Author: Peter Zijlstra <a.p.zijlstra@chello.nl>
| Date:   Sat Apr 19 19:45:00 2008 +0200
|
|     sched: fair-group: SMP-nice for group scheduling

Revert it so that we get v2.6.25 behavior.

Bisected-by: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-29 11:28:57 +02:00
Ingo Molnar f9305d4a09 revert ("sched: fair: weight calculations")
Yanmin Zhang reported:

Comparing with kernel 2.6.25, sysbench+mysql(oltp, readonly) has many
regressions with 2.6.26-rc1:

 1) 8-core stoakley: 28%;
 2) 16-core tigerton: 20%;
 3) Itanium Montvale: 50%.

Bisect located this patch:

| 8f1bc385cf is first bad commit
| commit 8f1bc385cf
| Author: Peter Zijlstra <a.p.zijlstra@chello.nl>
| Date:   Sat Apr 19 19:45:00 2008 +0200
|
|     sched: fair: weight calculations

Revert it to the 2.6.25 state.

Bisected-by: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-29 11:24:01 +02:00
Mike Travis 363ab6f142 core: use performance variant for_each_cpu_mask_nr
Change references from for_each_cpu_mask to for_each_cpu_mask_nr
where appropriate

Reviewed-by: Paul Jackson <pj@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-23 18:35:12 +02:00
Mike Galbraith 46151122e0 sched: fix weight calculations
The conversion between virtual and real time is as follows:

  dvt = rw/w * dt <=> dt = w/rw * dvt

Since we want the fair sleeper granularity to be in real time, we actually
need to do:

  dvt = - rw/w * l

This bug could be related to the regression reported by Yanmin Zhang:

| Comparing with kernel 2.6.25, sysbench+mysql(oltp, readonly) has lots
| of regressions with 2.6.26-rc1:
|
| 1) 8-core stoakley: 28%;
| 2) 16-core tigerton: 20%;
| 3) Itanium Montvale: 50%.

Reported-by: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-08 17:00:42 +02:00
Peter Zijlstra 3e51f33fcc sched: add optional support for CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
this replaces the rq->clock stuff (and possibly cpu_clock()).

 - architectures that have an 'imperfect' hardware clock can set
   CONFIG_HAVE_UNSTABLE_SCHED_CLOCK

 - the 'jiffie' window might be superfulous when we update tick_gtod
   before the __update_sched_clock() call in sched_clock_tick()

 - cpu_clock() might be implemented as:

     sched_clock_cpu(smp_processor_id())

   if the accuracy proves good enough - how far can TSC drift in a
   single jiffie when considering the filtering and idle hooks?

[ mingo@elte.hu: various fixes and cleanups ]

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-05 23:56:18 +02:00
Mike Galbraith d7dcdc11cf sched: fix debugging
Revert debugging commit 7ba2e74ab5.
print_cfs_rq_tasks() can induce live-lock if a task is dequeued
during list traversal.

Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-05 23:56:18 +02:00
Gregory Haskins 104f64549c sched: fix SCHED_FAIR wake-idle logic error
We currently use an optimization to skip the overhead of wake-idle
processing if more than one task is assigned to a run-queue.  The
assumption is that the system must already be load-balanced or we
wouldnt be overloaded to begin with.

The problem is that we are looking at rq->nr_running, which may include
RT tasks in addition to CFS tasks.  Since the presence of RT tasks
really has no bearing on the balance status of CFS tasks, this throws
the calculation off.

This patch changes the logic to only consider the number of CFS tasks
when making the decision to optimze the wake-idle.

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
CC: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-05 23:56:18 +02:00
Harvey Harrison 983ed7a66b sched: add statics, don't return void expressions
Noticed by sparse:
kernel/sched.c:760:20: warning: symbol 'sched_feat_names' was not declared. Should it be static?
kernel/sched.c:767:5: warning: symbol 'sched_feat_open' was not declared. Should it be static?
kernel/sched_fair.c:845:3: warning: returning void-valued expression
kernel/sched.c:4386:3: warning: returning void-valued expression

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-05 23:56:17 +02:00
Peter Zijlstra a992241de6 sched: fix normalized sleeper
Normalized sleeper uses calc_delta*() which requires that the rq load is
already updated, so move account_entity_enqueue() before place_entity()

Tested-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-05 23:56:17 +02:00
Peter Zijlstra 7ba2e74ab5 sched: debug: show a weight tree
Print a tree of weights.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-19 19:45:00 +02:00
Peter Zijlstra 8f1bc385cf sched: fair: weight calculations
In order to level the hierarchy, we need to calculate load based on the
root view. That is, each task's load is in the same unit.

             A
            / \
           B   1
          / \
         2   3

To compute 1's load we do:

	   weight(1)
	--------------
	 rq_weight(A)

To compute 2's load we do:

	  weight(2)      weight(B)
	------------ * -----------
	rq_weight(B)   rw_weight(A)

This yields load fractions in comparable units.

The consequence is that it changes virtual time. We used to have:

                time_{i}
  vtime_{i} = ------------
               weight_{i}

  vtime = \Sum vtime_{i} = time / rq_weight.

But with the new way of load calculation we get that vtime equals time.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-19 19:45:00 +02:00
Peter Zijlstra 4a55bd5e97 sched: fair-group: de-couple load-balancing from the rb-trees
De-couple load-balancing from the rb-trees, so that I can change their
organization.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-19 19:45:00 +02:00
Peter Zijlstra ac884dec6d sched: fair-group scheduling vs latency
Currently FAIR_GROUP sched grows the scheduler latency outside of
sysctl_sched_latency, invert this so it stays within.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-19 19:45:00 +02:00
Peter Zijlstra 18d95a2832 sched: fair-group: SMP-nice for group scheduling
Implement SMP nice support for the full group hierarchy.

On each load-balance action, compile a sched_domain wide view of the full
task_group tree. We compute the domain wide view when walking down the
hierarchy, and readjust the weights when walking back up.

After collecting and readjusting the domain wide view, we try to balance the
tasks within the task_groups. The current approach is a naively balance each
task group until we've moved the targeted amount of load.

Inspired by Srivatsa Vaddsgiri's previous code and Abhishek Chandra's H-SMP
paper.

XXX: there will be some numerical issues due to the limited nature of
     SCHED_LOAD_SCALE wrt to representing a task_groups influence on the
     total weight. When the tree is deep enough, or the task weight small
     enough, we'll run out of bits.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
CC: Abhishek Chandra <chandra@cs.umn.edu>
CC: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-19 19:45:00 +02:00
Hidetoshi Seto 1d3504fcf5 sched, cpuset: customize sched domains, core
[rebased for sched-devel/latest]

 - Add a new cpuset file, having levels:
     sched_relax_domain_level

 - Modify partition_sched_domains() and build_sched_domains()
   to take attributes parameter passed from cpuset.

 - Fill newidle_idx for node domains which currently unused but
   might be required if sched_relax_domain_level become higher.

 - We can change the default level by boot option 'relax_domain_level='.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-19 19:45:00 +02:00
Peter Zijlstra b758149c02 sched: prepatory code movement
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-19 19:45:00 +02:00
Dhaval Giani 354d60c2ff sched: mix tasks and groups
This patch allows tasks and groups to exist in the same cfs_rq. With this
change the CFS group scheduling follows a 1/(M+N) model from a 1/(1+N)
fairness model where M tasks and N groups exist at the cfs_rq level.

[a.p.zijlstra@chello.nl: rt bits and assorted fixes]
Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-19 19:44:59 +02:00
Peter Zijlstra 112f53f5d7 sched: old sleeper bonus
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-19 19:44:59 +02:00
Peter Zijlstra 79b3feffb1 sched: fix regression with sched yield
Balbir Singh reported:

> 1:mon> t
> [c0000000e7677da0] c000000000067de0 .sys_sched_yield+0x6c/0xbc
> [c0000000e7677e30] c000000000008748 syscall_exit+0x0/0x40
> --- Exception: c01 (System Call) at 00000400001d09e4
> SP (4000664cb10) is in userspace
> 1:mon> r
> cpu 0x1: Vector: 300 (Data Access) at [c0000000e7677aa0]
>     pc: c000000000068e50: .yield_task_fair+0x94/0xc4
>     lr: c000000000067de0: .sys_sched_yield+0x6c/0xbc

the check that should have avoided that is:

        /*
         * Are we the only task in the tree?
         */
        if (unlikely(rq->load.weight == curr->se.load.weight))
                return;

But I guess that overlooks rt tasks, they also increase the load.
So I guess something like this ought to fix it..

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-19 19:44:57 +02:00
Ingo Molnar 50df5d6aea sched: remove sysctl_sched_batch_wakeup_granularity
it's unused.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-19 19:44:57 +02:00
Peter Zijlstra 0bbd3336ee sched: fix wakeup granularity for buddies
The wakeup buddy logic didn't use the same wakeup granularity logic as the
wakeup preemption did, this might cause the ->next buddy to be selected past
the point where we would have preempted had the task been a single running
instance.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-19 19:44:57 +02:00