Commit Graph

23 Commits

Author SHA1 Message Date
Andrei Epure f2c6a5fb25 charger-manager: Use kmemdup instead of kzalloc + memcpy
Patch found using coccinelle.

Signed-off-by: Andrei Epure <epure.andrei@gmail.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-04-16 18:56:38 -07:00
Tejun Heo 2fbb520d20 charger_manager: Don't use [delayed_]work_pending()
There's no need to test whether a (delayed) work item in pending
before queueing, flushing or cancelling it.  Most uses are unnecessary
and quite a few of them are buggy.

Remove unnecessary pending tests and rewrite _setup_polling() so that
it uses mod_delayed_work() if the next polling interval is sooner than
currently scheduled.  queue_delayed_work() is used otherwise.

Only compile tested.  I noticed that two work items - setup_polling
and cm_monitor_work - schedule each other.  It's a very unusual
construct and I'm fairly sure it's racy.  You can't break such
circular dependency by calling cancel on each.  I strongly recommend
revising the mechanism.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Anton Vorontsov <cbou@mail.ru>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Donggeun Kim <dg77.kim@samsung.com>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2013-01-05 14:03:26 -08:00
Chanwoo Choi 41468a1119 charger-manager: Split _probe funtion to make the code more clean
This patch split _probe function for readability because _probe function
is longer than 400 line.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2013-01-05 14:00:09 -08:00
Chanwoo Choi f36b9ddbab charger-manager: Fix bug when check dropped voltage after fullbatt event
This patch check difference value between current voltage of battery and
desc->fullbatt_uV whether positve or negative number. If difference value
is negative number when current voltage of battery is larger than
desc->fullbatt_uV, charger-manager return immediately because battery is
fully charged.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-12-16 22:45:58 -08:00
Chanwoo Choi 0fa11dbc23 charger-manager: Fix bug related to checking fully charged state of battery
This patch fix bug related to checking fully charged state of battery when
charger-manager call is_full_charged() function. After reading property of
charger/fuel-gauge through power_supply API, val.intval is more than 1.
So, is_full_charged() function always return true. If true, battery means
fully charged state.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-12-16 22:43:23 -08:00
Bill Pemberton 415ec69fb1 power: remove use of __devexit
CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Anton Vorontsov <cbou@mail.ru>
Cc: David Woodhouse <dwmw2@infradead.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28 11:43:22 -08:00
Bill Pemberton 28ea73f4c6 power: remove use of __devexit_p
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Anton Vorontsov <cbou@mail.ru>
Cc: David Woodhouse <dwmw2@infradead.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28 11:43:22 -08:00
Linus Torvalds e665faa424 1. New drivers:
- Marvell 88pm860x charger and battery drivers;
    - Texas Instruments LP8788 charger driver;
 2. Two new power supply properties: whether a battery is authentic, and
    chargers' maximal currents and voltages;
 3. A lot of TI LP8727 Charger cleanups;
 4. New features for Charger Manager, mainly now we can disable specific
    regulators;
 5. Random fixes and cleanups for other drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJQbjMFAAoJEGgI9fZJve1bR6gP/2Ri0etCU5zQMmbsFv5wxwHT
 BNgqFYoLmtxAJm7afM/9Qo2GxSam/Gi6vW6jfYxVOEDt9hJ5zaaJBxM4XmKEBShR
 PYlV9u45jGUCIHJXoi8DTND9Swz0VfVve9UtK5fVdXr73fYFemP8U86alI1MBL5Q
 8U3F0V8rObjGKWZrzN4BreB8bfbZYQCUafpoGS1ids3Uwm38d4tDb/jx8guSV24D
 LEhXy9unV9NdPExRn1FWFAgqjtgnnBv5SmpCBd6VwKNmpOgVB+H0CjOaOPzMgd+0
 X6dpJQtbjGZOhHhkcAoWsXYgxS8WMtTqlSjHSgswJJ/fdjv8YJoT7ncyu5wItY1x
 cN5NRBKVpnHv+fkQDE4xVWzEOH68lK8RoGksay0gvTJj3MQWwOpOANGHbsnMG6rj
 GBzQ7pyMbDTK7n1oynvmSskF4BdvYHM+Ns7vPUOAzoduKrOnhPVDpk3rLSFZxQNO
 RoqXbnNYqg4qROB9z8Drs95WD59fKjNTlfFr1moR2sr4wncEJiFduMz4dCOs7nq7
 ahZxd95a2Bb6LbcN244+loGBXmx6KD6BurrDc3yTM3hl+oVx+MecVv9uoKvKlz4y
 YPh9XrdCSfj9Ms7TOqW8XPDl/ZREswaCIer7x8XsL+K42fYkPKlrO3OUMHIbh+3e
 rfkFPAR55bLcmtiaahp3
 =LkdH
 -----END PGP SIGNATURE-----

Merge tag 'for-v3.7' of git://git.infradead.org/battery-2.6

Pull battery updates from Anton Vorontsov:
 "1. New drivers:
     - Marvell 88pm860x charger and battery drivers;
     - Texas Instruments LP8788 charger driver;
  2. Two new power supply properties: whether a battery is authentic,
     and chargers' maximal currents and voltages;
  3. A lot of TI LP8727 Charger cleanups;
  4. New features for Charger Manager, mainly now we can disable
     specific regulators;
  5. Random fixes and cleanups for other drivers."

Fix up trivial conflicts in <linux/mfd/88pm860x.h>

* tag 'for-v3.7' of git://git.infradead.org/battery-2.6: (52 commits)
  pda_power: Remove ac_draw_failed goto and label
  charger-manager: Add support sysfs entry for charger
  charger-manager: Support limit of maximum possible
  charger-manager: Check fully charged state of battery periodically
  lp8727_charger: More pure cosmetic improvements
  lp8727_charger: Fix checkpatch warning
  lp8727_charger: Add description in the private data
  lp8727_charger: Fix a typo - chg_parm to chg_param
  lp8727_charger: Make some cosmetic changes in lp8727_delayed_func()
  lp8727_charger: Clean up lp8727_charger_changed()
  lp8727_charger: Return if the battery is discharging
  lp8727_charger: Make lp8727_charger_get_propery() simpler
  lp8727_charger: Make lp8727_ctrl_switch() inline
  lp8727_charger: Make lp8727_init_device() shorter
  lp8727_charger: Clean up lp8727_is_charger_attached()
  lp8727_charger: Use specific definition
  lp8727_charger: Clean up lp8727 definitions
  lp8727_charger: Use the definition rather than enum
  lp8727_charger: Fix code for getting battery temp
  lp8727_charger: Clear interrrupts at inital time
  ...
2012-10-07 17:29:24 +09:00
Chanwoo Choi 3950c7865c charger-manager: Add support sysfs entry for charger
This patch add support sysfs entry for each charger(regulator).
Charger-manager use one or more chargers for charging battery but some
charger isn't necessary on specific scenario. So, if some charger isn't
needed, can disable specific charger through 'externally_control' entry
while system is on state and confirm the information(name, state) of
charger.

The list of added sysfs entry
- /sys/class/power_supply/battery/chargers/charger.[index]/name
  show name of charger(regulator)
- /sys/class/power_supply/battery/chargers/charger.[index]/state
  show either enabled or disabled state of charger
- /sys/class/power_supply/battery/chargers/charger.[index]/externally_control

If 'externally_control' of specific charger is 1, Charger-manager cannot
enable regulator for charging when charger cable is attached and charger
must be maintained with disabled state. If 'externally_control' is zero,
Charger-manager usually can control to enable/disable regulator.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-09-21 16:32:40 -07:00
Chanwoo Choi 8fcfe088e2 charger-manager: Support limit of maximum possible
This patch check maximum possible duration of charging/discharging.

If whole charging duration exceed 'desc->charging_max_duration_ms', cm
stop charging to prevent overcharge/overheat. And if discharging duration
exceed, charger cable is attached, after full-batt, cm start charging to
maintain fully charged state for battery.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-09-20 22:08:00 -07:00
Chanwoo Choi 2ed9e9b653 charger-manager: Check fully charged state of battery periodically
This patch check periodically fully charged state of battery to protect
overcharge and overheat. If battery is fully charged, stop charging and
check droped voltage with 'fullbatt_vchkdrop_ms' period. When voltage of
battery is more droped than 'fullbatt_vchkdrop_uV' voltage,
charger-manager will restart charging for battery.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-09-20 22:07:49 -07:00
Chanwoo Choi fd65ee5f1c charger-manager: Use replacement variable to check state of battery
This patch remove unnecessary variable(cm->fullbatt_vchk_uV) by using
'desc->fullbatt_uV' field directly in fullbatt_handler() function
to check the state of battery.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-08-22 20:09:08 -07:00
Chanwoo Choi dbb61fc745 charger-manager: Disable regulator when charger cable is detached
This patch disable regulator for charging when charger cable is detached
before stopping charging forcibly on abnormal battery state and check
return value of regulator_enable/disable() function to confirm correct
operation of enabling or disabling regulator for charging.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-08-22 20:08:28 -07:00
Tejun Heo 41f63c5359 workqueue: use mod_delayed_work() instead of cancel + queue
Convert delayed_work users doing cancel_delayed_work() followed by
queue_delayed_work() to mod_delayed_work().

Most conversions are straight-forward.  Ones worth mentioning are,

* drivers/edac/edac_mc.c: edac_mc_workq_setup() converted to always
  use mod_delayed_work() and cancel loop in
  edac_mc_reset_delay_period() is dropped.

* drivers/platform/x86/thinkpad_acpi.c: No need to remember whether
  watchdog is active or not.  @fan_watchdog_active and related code
  dropped.

* drivers/power/charger-manager.c: Seemingly a lot of
  delayed_work_pending() abuse going on here.
  [delayed_]work_pending() are unsynchronized and racy when used like
  this.  I converted one instance in fullbatt_handler().  Please
  conver the rest so that it invokes workqueue APIs for the intended
  target state rather than trying to game work item pending state
  transitions.  e.g. if timer should be modified - call
  mod_delayed_work(), canceled - call cancel_delayed_work[_sync]().

* drivers/thermal/thermal_sys.c: thermal_zone_device_set_polling()
  simplified.  Note that round_jiffies() calls in this function are
  meaningless.  round_jiffies() work on absolute jiffies not delta
  delay used by delayed_work.

v2: Tomi pointed out that __cancel_delayed_work() users can't be
    safely converted to mod_delayed_work().  They could be calling it
    from irq context and if that happens while delayed_work_timer_fn()
    is running, it could deadlock.  __cancel_delayed_work() users are
    dropped.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Roland Dreier <roland@kernel.org>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
2012-08-13 16:27:37 -07:00
Chanwoo Choi 45cd4fb28b charger-manager: Set current limit of regulator for over current protection
This patch support the protection of host device from over current.
The Charger-manager set proper current limit of charger(regulator) for
charging according to type of charger cable when external connector
is attached.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-07-13 18:31:17 -07:00
Chanwoo Choi bee737bccb charger-manager: Use EXTCON Subsystem to detect charger cables for charging
This patch support that charger-manager use EXTCON(External Connector)
Subsystem to detect the state of charger cables for enabling or disabling
charger(regulator) and select the charger cable for charging among
a number of external cable according to policy of H/W board.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-07-13 18:31:13 -07:00
Chanwoo Choi dfeccb12b4 charger-manager: Provide cm_notify_event function for in-kernel use
By using cm_notify_event function, charger driver can report several
charger events (e.g. battery full and external power in/out, etc) to
Charger-Manager. Charger-Manager can properly and immediately control
chargers by the reported event.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-05-05 19:51:58 -07:00
Chanwoo Choi d829dc75ba charger-manager: Poll battery health in normal state
Charger-Manager needs to check battery health in normal state
as well as suspend-to-RAM state. When the battery is fully charged,
Charger-Manager needs to determine when the chargers restart charging.

This patch allows Charger-Manager to monitor battery health in normal
state and handle operation for chargers after battery is fully charged.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-05-05 19:48:50 -07:00
Anton Vorontsov df58c04c9f charger-manager: Simplify charger_get_property(), get rid of a warning
This patch fixes the following warning and makes the code a little
bit more simpler:

  CC      drivers/power/charger-manager.o
charger-manager.c: In function 'charger_get_property':
charger-manager.c:429:15: warning: 'i' may be used uninitialized in this function [-Wuninitialized]

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26 20:41:20 +04:00
Axel Lin bb2a95c2d2 charger-manager: Clean up for better readability
This patch includes below changes:

* Some code change for better readability.
* Current code in probe already ensures desc->charger_regulators
  is not NULL. No need to check if it is NULL or not before calling
  regulator_bulk_free().
* Use dev_get_drvdata() in cm_suspend_prepare() and cm_suspend_complete()

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26 20:41:19 +04:00
Axel Lin 1bbe24d465 power_supply: Fix modalias for charger-manager
Since 43cc71eed1, the platform
modalias is prefixed with "platform:".
Current code has the id_table, thus add MODULE_DEVICE_TABLE will
automatically setup the modalias.

Also make charger_manager_id static as it is only used in this driver.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2012-02-01 21:29:52 +04:00
Donggeun Kim ad3d13eee7 power_supply: Charger-Manager: Add properties for power-supply-class
Charger Manager provides power-supply-class aggregating
information from multiple chargers and a fuel-gauge.

Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2012-01-04 08:08:45 +04:00
Donggeun Kim 3bb3dbbd56 power_supply: Add initial Charger-Manager driver
Because battery health monitoring should be done even when suspended,
it needs to wake up and suspend periodically. Thus, userspace battery
monitoring may incur too much overhead; every device and task is woken
up periodically. Charger Manager uses suspend-again to provide
in-suspend monitoring.

This patch allows to monitor battery health in-suspend state.

Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2012-01-04 08:08:27 +04:00