Commit Graph

90 Commits

Author SHA1 Message Date
Song Qiang 6eb17c6c8a iio: proximity: Add driver support for ST's VL53L0X ToF ranging sensor.
This driver was originally written by ST in 2016 as a misc input device
driver, and hasn't been maintained for a long time. I grabbed some code
from it's API and reformed it into an iio proximity device driver.
This version of driver uses i2c bus to talk to the sensor and
polling for measuring completes, so no irq line is needed.
It can be tested with reading from
/sys/bus/iio/devices/iio:deviceX/in_distance_input

Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-09-22 16:42:56 +01:00
Geert Uytterhoeven 24493cce03 iio: light: isl29501: Simplify code to kill compiler warning
With gcc 4.1.2:

    drivers/iio/proximity/isl29501.c: In function ‘isl29501_register_write’:
    drivers/iio/proximity/isl29501.c:235: warning: ‘msb’ may be used uninitialized in this function

While this is a false positive, it can easily be avoided by removing the
"msb" intermediate variable.
Remove the "lsb" intermediate variable for consistency.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-09-02 09:56:49 +01:00
Mathieu Othacehe 1c28799257 iio: light: isl29501: Add support for the ISL29501 ToF sensor.
This patch adds support for the ISL29501 Time of Flight sensor.

Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-07-23 19:18:10 +01:00
Greg Kroah-Hartman 6761f0ac66 Second set of new device support, features and cleanup for IIO in the 4.17 cycle
The uptick in staging cleanup is partly due to GSoC Applications
 process being underway and one of Daniel's tasks being to try
 cleaning up an IIO driver to move out of staging.
 Naturally there is some normal staging cleanup progress in here
 as well.
 
 New device support
 * Microchip mcp4018
   - New driver supproting MCP4017, MCP4018 and MCP4019 digital pots.
 * On Semiconductor lv0104cs
   - New driver to support this ambient light sensor.
 
 Cleanup
 * axp20x_adc
   - remove a !! in favour of clear ternary operator.
 * ad2s1210 (staging cleanup)
   - Reorganise to avoid ending a line with [
   - Remove some unnecessary defines.
   - Remove unsed variable.
 * ad5380
   - Replace magic 0 with IIO_CHAN_INFO_RAW
 * ad5764
   - Replace magic 0 with IIO_CHA_INFO_RAW
 * ad7150 (staging cleanup)
   - Align arguements with parenthesis.
 * ad7152 (staging cleanup)
   - Align arguements.
 * ad7746 (staging cleanup)
   - Align arguements.
 * ad7816
   - Remove pointless void pointer cast.
 * ade7753
   - Replace IIO_DEV_ATTR_CH_OFF with equivalent to avoid confusing
     checkpatch (this macro didn't really help anyway).  Also drop the
     macro from the meter.h header.
 * ade7754 (staging cleanup)
   - Add names to funciton definition arguements.
   - Align arguements with open parenthesis where possible.
 * ade7758 (staging cleanup)
   - Remove __func__ from dev_dbg statements as provided by dynamic
     debug anyway.
   - Align arguements with open parenthesis where possible.
 * ade7759 (staging cleanup)
   - Replace IIO_DEV_ATTR_CH_OFF with equiavalent to avoid confusing
     checkpatch.
 * adis16201 (staging cleanup)
   - Headers in alphabetical order.
   - Blank lines before returns.
 * adis16209 (staging cleanup)
   - Headers in alphabetical order
   - Change some definition names to make them more meaningful (2 rounds
     of this).
   - Add explicit _REG prefix to register names to make them
     obviously different from fields within those registers.
   - Remove some superflous comments and group definitions better.
   - Use a switch statement to make it semantically obvious that we
     only have two options (rather than an unlimited 'else').
   - Use sign_extent32 instead of open coding.
 * adt7316 (staging cleanup)
   - Move an export next to symbol.
 * bmc150
   - drop redundant __func__ in dynamic debug.
 * ccs811
   - Rename varaible to better reflect what it does.
 * cros_ec
   - Reduce sampling frequency before suspending to avoid preventing
     suspend.
 * dummy
   - Correct whitespace in Kconfig.
   - Add extra description in Kconfig.
 * ds1803
   - Remove a VLA which we always know is 2 long.
 * hid-sensor-accel
   - Replace magic number 0 by IIO_CHAN_INFO_RAW.
 * hid-sensor-gyro
   - Replace magic number 0 by IIO_CHAN_INFO_RAW.
 * hid-sensor-light
   - Replace magic number 0 by IIO_CHAN_INFO_RAW.
 * hid-sensor-magn
   - Replace magic number 0 by IIO_CHAN_INFO_RAW.
 * lm3533
   - Replace magic number 0 by IIO_CHAN_INFO_RAW
 * mlx90632
   - Squash a smatch warning - no runtime effect.
 * stm32_dfsdm:
   - Cleanup the dt bindings.
 * sx9500
   - Add GPIO ACPI mapping table to behave correctly when firmware
     doesn't provide the mapping.
 * tsl2x7x (staging cleanup)
   - Fix the proximity sensor functionality.
   - Remove platform data provided power functions.  There are much
     better ways to do this these days.
   - Introduce some common functions to avoid various repititions.
   - Stop using mutex_trylock when mutex_lock and wait a bit is fine.
   - Improve error handling in various places.
   - Drop some 'Camel case' (which wasn't actually strickly camel case
     but was a bit odd.
   - Drop some _available sysfs attributes for things that don't exist
     (for particular supported parts).
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAlqlObQRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FoissQ/+IQjcyxNdtOhHagvRgZ5z+6GYj6JzIX8s
 Qqnep34sc6yUaygbJBXdcBQ5qdnPjrTk2CD3VYANOdC1bqXa80yuTGCGN6lBIBEr
 /qBso6UbUiobA1PXektUj7Qel5HfVfYCyQ4NssSwKbdza6pyqoZA+iPzwiztWAwE
 JsU5EdsTVxB/39kMOnoQJM6l5Lc5Ljg5pS3Du++3U49neiDk1Z/+VXsimFSPK3zt
 FrSmMehNRYr0iFPwi7IZf8beG5ixmpRyY+KZzdM45Gm4hrpgE9ZIMd7A8B+ypx5N
 WM1HJxu3PC6xHc7DIbcJG82sQ9DDrIeCkN4wN29ESE0JUt/GPvySSFZRAhsVp+xO
 8rObv0r9Va+ones5WhZeAx/x3FowommZ2Jn+0FpX5H0X0mgi34au4YiOOAhg2gz5
 9fnj39k7WarYozn1VVY8D8copO6C7j/UQVup/qfjmufkc7bDrQMml3rBWZbNxSUC
 0TfZZJ9k+bxw2fvIedrjU/CFYbJJSpkRF/Sm3TZW28OMpxt/3qmAECtREOXVLyl2
 cJnJpw8ERWbyeHJxhULurc2ekJVFeOS1sZ+sWU7P0LFt+J3dkOgZP1GJpXXhCWQa
 GmgIm7vYYtAsVjDZ+FwH4ir/wSUeufscFEHs1oVhmIRh7jRCaJWycgLKZcK+rVRK
 docrwE4wGrk=
 =6eOr
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.17b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of new device support, features and cleanup for IIO in the 4.17 cycle

The uptick in staging cleanup is partly due to GSoC Applications
process being underway and one of Daniel's tasks being to try
cleaning up an IIO driver to move out of staging.
Naturally there is some normal staging cleanup progress in here
as well.

New device support
* Microchip mcp4018
  - New driver supproting MCP4017, MCP4018 and MCP4019 digital pots.
* On Semiconductor lv0104cs
  - New driver to support this ambient light sensor.

Cleanup
* axp20x_adc
  - remove a !! in favour of clear ternary operator.
* ad2s1210 (staging cleanup)
  - Reorganise to avoid ending a line with [
  - Remove some unnecessary defines.
  - Remove unsed variable.
* ad5380
  - Replace magic 0 with IIO_CHAN_INFO_RAW
* ad5764
  - Replace magic 0 with IIO_CHA_INFO_RAW
* ad7150 (staging cleanup)
  - Align arguements with parenthesis.
* ad7152 (staging cleanup)
  - Align arguements.
* ad7746 (staging cleanup)
  - Align arguements.
* ad7816
  - Remove pointless void pointer cast.
* ade7753
  - Replace IIO_DEV_ATTR_CH_OFF with equivalent to avoid confusing
    checkpatch (this macro didn't really help anyway).  Also drop the
    macro from the meter.h header.
* ade7754 (staging cleanup)
  - Add names to funciton definition arguements.
  - Align arguements with open parenthesis where possible.
* ade7758 (staging cleanup)
  - Remove __func__ from dev_dbg statements as provided by dynamic
    debug anyway.
  - Align arguements with open parenthesis where possible.
* ade7759 (staging cleanup)
  - Replace IIO_DEV_ATTR_CH_OFF with equiavalent to avoid confusing
    checkpatch.
* adis16201 (staging cleanup)
  - Headers in alphabetical order.
  - Blank lines before returns.
* adis16209 (staging cleanup)
  - Headers in alphabetical order
  - Change some definition names to make them more meaningful (2 rounds
    of this).
  - Add explicit _REG prefix to register names to make them
    obviously different from fields within those registers.
  - Remove some superflous comments and group definitions better.
  - Use a switch statement to make it semantically obvious that we
    only have two options (rather than an unlimited 'else').
  - Use sign_extent32 instead of open coding.
* adt7316 (staging cleanup)
  - Move an export next to symbol.
* bmc150
  - drop redundant __func__ in dynamic debug.
* ccs811
  - Rename varaible to better reflect what it does.
* cros_ec
  - Reduce sampling frequency before suspending to avoid preventing
    suspend.
* dummy
  - Correct whitespace in Kconfig.
  - Add extra description in Kconfig.
* ds1803
  - Remove a VLA which we always know is 2 long.
* hid-sensor-accel
  - Replace magic number 0 by IIO_CHAN_INFO_RAW.
* hid-sensor-gyro
  - Replace magic number 0 by IIO_CHAN_INFO_RAW.
* hid-sensor-light
  - Replace magic number 0 by IIO_CHAN_INFO_RAW.
* hid-sensor-magn
  - Replace magic number 0 by IIO_CHAN_INFO_RAW.
* lm3533
  - Replace magic number 0 by IIO_CHAN_INFO_RAW
* mlx90632
  - Squash a smatch warning - no runtime effect.
* stm32_dfsdm:
  - Cleanup the dt bindings.
* sx9500
  - Add GPIO ACPI mapping table to behave correctly when firmware
    doesn't provide the mapping.
* tsl2x7x (staging cleanup)
  - Fix the proximity sensor functionality.
  - Remove platform data provided power functions.  There are much
    better ways to do this these days.
  - Introduce some common functions to avoid various repititions.
  - Stop using mutex_trylock when mutex_lock and wait a bit is fine.
  - Improve error handling in various places.
  - Drop some 'Camel case' (which wasn't actually strickly camel case
    but was a bit odd.
  - Drop some _available sysfs attributes for things that don't exist
    (for particular supported parts).
2018-03-14 12:32:11 +01:00
Andy Shevchenko b61d8e630a iio: proximity: sx9500: Add GPIO ACPI mapping table
In order to satisfy GPIO ACPI library requirements convert users of
gpiod_get_index() to correctly behave when there no mapping is provided
by firmware.

Here we add explicit mapping between _CRS GpioIo() resources and
their names used in the driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-03 15:11:27 +00:00
Greg Kroah-Hartman 36e9f7203e Merge 4.16-rc3 into staging-next
We want the IIO/Staging fixes in here, and to resolve a merge problem
with the move of the fsl-mc code.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-26 15:32:00 +01:00
Matt Ranostay d6ad805844 iio: add SPDX identifier for various drivers
Add GPLv2+ SPDX identifier and update email for author's drivers.

Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-02-18 11:55:19 +00:00
Andreas Klinger 511051d509 iio: srf08: fix link error "devm_iio_triggered_buffer_setup" undefined
Functions for triggered buffer support are needed by this module.
If they are not defined accidentally by another driver, there's an error
thrown out while linking.

Add a select of IIO_BUFFER and IIO_TRIGGERED_BUFFER in the Kconfig file.

Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Fixes: a831959371 ("iio: srf08: add triggered buffer support")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-02-04 11:13:00 +00:00
Greg Kroah-Hartman e8cd29b774 Merge Linus's staging merge point into staging-next
This resolves the merge issue pointed out by Stephen in
drivers/iio/adc/meson_saradc.c.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-06 15:27:17 +01:00
Andy Shevchenko e53111ad5d iio: proximity: sx9500: Assign interrupt from GpioIo()
The commit 0f0796509c

("iio: remove gpio interrupt probing from drivers that use a single interrupt")

removed custom IRQ assignment for the drivers which are enumerated via
ACPI or OF. Unfortunately, some ACPI tables have IRQ line defined as
GpioIo() resource and thus automatic IRQ allocation will fail.

Partially revert the commit 0f0796509c to restore original behaviour.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-12-02 11:15:13 +00:00
Andy Shevchenko b87935552e iio: proximity: sx9500: Add another ACPI ID
Add new ACPI ID for sx9500 as had been found on prototype board.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-12-02 10:40:00 +00:00
Linus Torvalds 449fcf3ab0 Staging/IIO patches for 4.15-rc1
Here is the "big" staging and IIO driver update for 4.15-rc1.
 
 Lots and lots of little changes, almost all minor code cleanups as the
 Outreachy application process happened during this development cycle.
 Also happened was a lot of IIO driver activity, and the typec USB code
 moving out of staging to drivers/usb (same commits are in the USB tree
 on a persistent branch to not cause merge issues.)
 
 Overall, it's a wash, I think we added a few hundred more lines than
 removed, but really only a few thousand were modified at all.
 
 All of these have been in linux-next for a while.  There might be a
 merge issue with Al's vfs tree in the pi433 driver (take his changes,
 they are always better), and the media tree with some of the odd atomisp
 cleanups (take the media tree's version).
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWgnFrg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymxbwCgtNlBkqD2JJYpLRKvI/C4w1vzZsEAnA2THRkt
 g3ioPBqmqC/2DSbldr2o
 =/ebw
 -----END PGP SIGNATURE-----

Merge tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO updates from Greg KH:
 "Here is the "big" staging and IIO driver update for 4.15-rc1.

  Lots and lots of little changes, almost all minor code cleanups as the
  Outreachy application process happened during this development cycle.
  Also happened was a lot of IIO driver activity, and the typec USB code
  moving out of staging to drivers/usb (same commits are in the USB tree
  on a persistent branch to not cause merge issues.)

  Overall, it's a wash, I think we added a few hundred more lines than
  removed, but really only a few thousand were modified at all.

  All of these have been in linux-next for a while. There might be a
  merge issue with Al's vfs tree in the pi433 driver (take his changes,
  they are always better), and the media tree with some of the odd
  atomisp cleanups (take the media tree's version)"

* tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (507 commits)
  staging: lustre: add SPDX identifiers to all lustre files
  staging: greybus: Remove redundant license text
  staging: greybus: add SPDX identifiers to all greybus driver files
  staging: ccree: simplify ioread/iowrite
  staging: ccree: simplify registers access
  staging: ccree: simplify error handling logic
  staging: ccree: remove dead code
  staging: ccree: handle limiting of DMA masks
  staging: ccree: copy IV to DMAable memory
  staging: fbtft: remove redundant initialization of buf
  staging: sm750fb: Fix parameter mistake in poke32
  staging: wilc1000: Fix bssid buffer offset in Txq
  staging: fbtft: fb_ssd1331: fix mirrored display
  staging: android: Fix checkpatch.pl error
  staging: greybus: loopback: convert loopback to use generic async operations
  staging: greybus: operation: add private data with get/set accessors
  staging: greybus: loopback: Fix iteration count on async path
  staging: greybus: loopback: Hold per-connection mutex across operations
  staging: greybus/loopback: use ktime_get() for time intervals
  staging: fsl-dpaa2/eth: Extra headroom in RX buffers
  ...
2017-11-13 20:53:28 -08:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Greg Kroah-Hartman 7706abf5a0 Merge 4.14-rc6 into staging-next
We want the IIO and staging driver fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-23 14:29:43 +02:00
Peter Meerwald-Stadler 79e6418866 iio: proximity: Add rfd77402 driver
Driver for RF Digital RFD77402 VCSEL (vertical-cavity surface-emitting
laser) Time-of-Flight (ToF) sensor to measure distance up to 2 m with
millimeter precision

Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-10-14 18:28:51 +01:00
Matt Ranostay eb35279dd7 iio: proximity: as3935: noise detection + threshold changes
Most applications are too noisy to allow the default noise and
watchdog settings, and thus need to be configurable via DT
properties.

Also default settings to POR defaults on a reset, and register
distuber interrupts as noise since it prevents proper usage.

Cc: devicetree@vger.kernel.org
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-09-25 19:49:21 +01:00
Jonathan Cameron a62e256b14 iio:proximity: drop assign iio_info.driver_module and iio_trigger_ops.owner
The equivalent of both of these are now done via macro magic when
the relevant register calls are made.  The actual structure
elements will shortly go away.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
2017-08-22 22:14:51 +01:00
Andreas Klinger dc2696ba46 iio: srf08: add support for srf02 in i2c mode
srf02 added with support for i2c interface

Attributes for setting max range or sensitivity are omitted for the case of
srf02 type sensor, because they are not supported by the hardware.

Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-08-18 08:04:17 +01:00
Andreas Klinger c5bf4a0446 iio: srf08: add sensor type srf10
Ultrasonic sensor srf10 is quite similar to srf08 and now also supported by
the driver as device tree compatible string.

It was necessary to prepare the source for supplementary sensors. This is
done by enum srf08_sensor_type.

The most significiant difference between srf08 and srf10 is another range
and values of register gain (in the driver it's call sensitivity).
Therefore the array of it is extended and dependent of the sensor type.

Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-08-18 08:01:58 +01:00
Andreas Klinger a831959371 iio: srf08: add triggered buffer support
Add support for triggered buffers.

Data format is quite simple:
  distance     16 Bit
  alignment    48 Bit
  timestamp    64 Bit

Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-08-18 08:00:17 +01:00
Andreas Klinger c02b3a113d iio: srf08: add device tree table
Added MODULE_DEVICE_TABLE for device tree bindings.

It used to work without it by using the i2c_device_id table, but adding the
table makes everything clear and documented.

Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-08-18 07:59:07 +01:00
Greg Kroah-Hartman dd36a2d9ad Second set of IIO new device support, features and cleanups for the 4.13 cycle.
A few reverts here. One was a general failure to notice a device was already
 supported by another driver.  The second is due to a review comment pointing
 out that the original patch was a bad idea and would break existing systems.
 
 Reverts
 * bma180
   - Revert addition of support for the BMA250E it is already supported by
     the bmc150-accel and better supported at that. Oops.
 * hi8435
   - The fix for cleanup of the reset gpio stuff isn't a good way to go.  It
     breaks systems where an inverting level convertor is used.  The right fix
     is to make the original devicetree correct - even if it involves patching
     the devicetree in kernel.
 
 New Device Support
 * stm32-adc
   - STM32H7 support and bindings.
 
 Features
 * core
   - add a hardware triggered operating mode for systems in which the actual
     trigger is never seen by the kernel.  This is typically only used when
     a device 'can' use other triggers, but if a particular magic one is
     enabled the interrupt is effectively handled in hardware and we never see
     it.
 * st-lsm6dsx
   - support active low interrupts.
 * stm32-adc
   - Make the core adc clock optional as not all hardware supported requires it.
   - Make the bus clock optional in the per instance driver as it may be shared
     by all instances of the ADC and is handled by the core.
   - Rework to have a data structure representing the device type specific
     elements.
 * stm32-trigger (and counter)
   - Use the INDIO_HARDWARE_TRIGGERED_MODE where appropriate.
   - Add an attribute to configure device modes for quadrature counting etc.
 
 Clean ups and minor fixes
 * IIO core.
   - use __sysfs_match_string() helper rather than open coding the same.
 * ad7791
   - use sysfs_match_string() helper rather than open coding the same.
 * aspeed-adc
   - handle return value of clk_prepare_enable
 * cpcap
   - Fix default register values and ensure the battery thermistor is enabled
     correctly.
   - Fix the reported die temperature where we can - docs are lacking.
   - Remove the hung interrupt quirk as no longer happens due to fix in the
     mfd driver.
 * hi8435
   - Remove &s from hi8435_info definition as unneeded and inconsistent.
 * hid-sensor-trgger
   - Add kconfig depends on IIO_BUFFER (fixes patch in previous series)
 * ina2xx
   - Make the use of iio_info_mask* elements consistent for all channels.
     This doesn't have any visible effect, but acts as clear documentation of
     which channels various resulting attributes apply to.
 * lpc32xx
   - handle the return value of clk_prepare_enable.
 * meson-saradc
   - NULL instead of 0 for pointer.
 * mma9551
   - use NULL for GPIO connection ID to aid implementation fo ACPI support.
     Here the connection ID doesn't actually tell us anything and it is much
     easier to deal with the driver if it's not there.
 * mpu6050
   - Fix lock issues through use of a local mux.
   - Replace sprintf with scnprintf as appropriate.
   - Check whoami against all known values.  This allows for a small number of
     boards where we are really fishing for the part not being present at all.
     It is unfortunately common to have undescribed changes to use newer chips.
     We paper over this but just emitting a warning for those cases as long as
     we know about.
 * mxs-lradc
   - Fix some non static warnings.
 * rcar-adc
   - Part of making the naming for this part consistent across the kernel.
 * st_accel
   - drop some spi_device_id entries for variants with no SPI support
 * st_magn
   - drop some spi_device_id entries for variants with no SPI support.
 * sx9500
   - Use devm_gpiod_get instead of indexed value with an index of 0 on all
     occasions.
 * twl4030
   - Drop unused twl4030_get_madc_conversion as callers removed now throughout
     kernel.
   - Unexport twl4030_madc_conversion() as no used only within this driver.
   - Drop twl4030_madc_user_params as not used now.
   - Drop twl4030_madc_request.func_cb as not used now.
   - Fold the twl4030-madc.h header into the driver as no longer used anywhere
     else in the kernel.
 * xilinx
   - Handle the return value of clk_prepare_enable
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAllJSCURHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FogTTQ//bbAzHKB0qTwusFN5jrz1JqjGj3+bMXH/
 KumP4nj7NzwKBe4tDe40FsdkZ4c+Um8pK2Aj7iJZojwTcCi02VVjbM++Gj0akMTZ
 MIlrEkTvqVsmVFG085hloSiFU2xXfTnfQmp19M9QtyDnHkgBMo9sOFnBK3EG+Se4
 NIliUvq8PJzCjTRVafSeSFNoDMwXXQTIKhfq8TDSeOG9o5mCTgAdy8yGiZ2ag/Ok
 peFfwauGs9Gg6tRour7UxccawuLnuzPNzwzUUSG3gkdIUTQVD6YHAzXzwblnB5P6
 0ZcErJpGSLAYcHQH310ZRTizhhW+vi+ftWUkps81xqpmFp3+EydVnJS0MZXYgM2o
 Cv6wbohp9w22I5/B9TMEfL7vnj1i4iZoJfi00Su1HBDHBiNpXISRc/fnkRMWavhr
 gvypyxngQmXm1JN/R8UMbJQsSpH3TN07AYF1qx0Tktfyx4S18rdW4hwt+kBNe9ni
 5G9xQU8IhmN8yvHMsTvZHbAmbuOR6iaghx3arf65qdHPvKSQ/nTSlran9U1JPvyJ
 tWVKtPaY5zEGgkQBmWee+qWkWOBGYDC4nmTwijB0u61Deq+5hGg55cZPd0fSXLMg
 6ecNg2v7zrdYldulOpfdNUEOrXa/NYBEAuYUNvccp8DArOqdazkCyO3DlDFDUXRw
 RKNE7Btx/rU=
 =2fJI
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.13b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of IIO new device support, features and cleanups for the 4.13 cycle.

A few reverts here. One was a general failure to notice a device was already
supported by another driver.  The second is due to a review comment pointing
out that the original patch was a bad idea and would break existing systems.

Reverts
* bma180
  - Revert addition of support for the BMA250E it is already supported by
    the bmc150-accel and better supported at that. Oops.
* hi8435
  - The fix for cleanup of the reset gpio stuff isn't a good way to go.  It
    breaks systems where an inverting level convertor is used.  The right fix
    is to make the original devicetree correct - even if it involves patching
    the devicetree in kernel.

New Device Support
* stm32-adc
  - STM32H7 support and bindings.

Features
* core
  - add a hardware triggered operating mode for systems in which the actual
    trigger is never seen by the kernel.  This is typically only used when
    a device 'can' use other triggers, but if a particular magic one is
    enabled the interrupt is effectively handled in hardware and we never see
    it.
* st-lsm6dsx
  - support active low interrupts.
* stm32-adc
  - Make the core adc clock optional as not all hardware supported requires it.
  - Make the bus clock optional in the per instance driver as it may be shared
    by all instances of the ADC and is handled by the core.
  - Rework to have a data structure representing the device type specific
    elements.
* stm32-trigger (and counter)
  - Use the INDIO_HARDWARE_TRIGGERED_MODE where appropriate.
  - Add an attribute to configure device modes for quadrature counting etc.

Clean ups and minor fixes
* IIO core.
  - use __sysfs_match_string() helper rather than open coding the same.
* ad7791
  - use sysfs_match_string() helper rather than open coding the same.
* aspeed-adc
  - handle return value of clk_prepare_enable
* cpcap
  - Fix default register values and ensure the battery thermistor is enabled
    correctly.
  - Fix the reported die temperature where we can - docs are lacking.
  - Remove the hung interrupt quirk as no longer happens due to fix in the
    mfd driver.
* hi8435
  - Remove &s from hi8435_info definition as unneeded and inconsistent.
* hid-sensor-trgger
  - Add kconfig depends on IIO_BUFFER (fixes patch in previous series)
* ina2xx
  - Make the use of iio_info_mask* elements consistent for all channels.
    This doesn't have any visible effect, but acts as clear documentation of
    which channels various resulting attributes apply to.
* lpc32xx
  - handle the return value of clk_prepare_enable.
* meson-saradc
  - NULL instead of 0 for pointer.
* mma9551
  - use NULL for GPIO connection ID to aid implementation fo ACPI support.
    Here the connection ID doesn't actually tell us anything and it is much
    easier to deal with the driver if it's not there.
* mpu6050
  - Fix lock issues through use of a local mux.
  - Replace sprintf with scnprintf as appropriate.
  - Check whoami against all known values.  This allows for a small number of
    boards where we are really fishing for the part not being present at all.
    It is unfortunately common to have undescribed changes to use newer chips.
    We paper over this but just emitting a warning for those cases as long as
    we know about.
* mxs-lradc
  - Fix some non static warnings.
* rcar-adc
  - Part of making the naming for this part consistent across the kernel.
* st_accel
  - drop some spi_device_id entries for variants with no SPI support
* st_magn
  - drop some spi_device_id entries for variants with no SPI support.
* sx9500
  - Use devm_gpiod_get instead of indexed value with an index of 0 on all
    occasions.
* twl4030
  - Drop unused twl4030_get_madc_conversion as callers removed now throughout
    kernel.
  - Unexport twl4030_madc_conversion() as no used only within this driver.
  - Drop twl4030_madc_user_params as not used now.
  - Drop twl4030_madc_request.func_cb as not used now.
  - Fold the twl4030-madc.h header into the driver as no longer used anywhere
    else in the kernel.
* xilinx
  - Handle the return value of clk_prepare_enable
2017-06-26 07:09:23 +02:00
Greg Kroah-Hartman 7bf1e44f86 Merge 4.12-rc5 into staging-next
We want the IIO fixes and other staging driver fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-12 08:20:47 +02:00
Andy Shevchenko c306dbd88c iio: proximity: sx9500: Use devm_gpiod_get()
Since index is always 0 replace devm_gpiod_get_index() by devm_gpiod_get().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-11 15:07:34 +01:00
Matt Ranostay 9122b54f26 iio: proximity: as3935: fix iio_trigger_poll issue
Using iio_trigger_poll() can oops when multiple interrupts
happen before the first is handled.

Use iio_trigger_poll_chained() instead and use the timestamp
when processed, since it will be in theory be 2 ms max latency.

Fixes: 24ddb0e4bb ("iio: Add AS3935 lightning sensor support")
Cc: stable@vger.kernel.org
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-07 13:21:55 +01:00
Matt Ranostay 275292d3a3 iio: proximity: as3935: fix AS3935_INT mask
AS3935 interrupt mask has been incorrect so valid lightning events
would never trigger an buffer event. Also noise interrupt should be
BIT(0).

Fixes: 24ddb0e4bb ("iio: Add AS3935 lightning sensor support")
CC: stable@vger.kernel.org
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-04-27 16:28:57 +01:00
Matt Ranostay d532e5b2bc iio: proximity: as3935: move storm out of range check
Move out of storm check to apply to IIO_CHAN_INFO_RAW so the reported
results are constant between the former and the IIO_CHAN_INFO_PROCESSED

Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-04-27 07:22:46 +01:00
Matt Ranostay 6272c0de13 iio: proximity: as3935: recalibrate RCO after resume
According to the datasheet the RCO must be recalibrated
on every power-on-reset. Also remove mutex locking in the
calibration function since callers other than the probe
function (which doesn't need it) will have a lock.

Fixes: 24ddb0e4bb ("iio: Add AS3935 lightning sensor support")
Cc: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-04-26 07:06:31 +01:00
Greg Kroah-Hartman df47c0a638 Fifth set of IIO fixes for the 4.11 cycle.
As these are rather late in the cycle, they may sneak over into 4.12.
 There is a fix for a regression caused by another fix (hid sensors
 hardware seems to vary a lot in how various corner cases are handled).
 
 * ad7303
   - fix channel description. Numeric values were being passed as characters
   presumably leading to garbage from the userspace interface.
 * as3935
   - the write data macro was wrong so fix it.
 * bmp280
   - incorrect handling of negative values as being unsigned broke humidity
   calculation.
 * hid-sensor
   - Restore the poll and hysteresis values after resume as some hardware
   doesn't do it.
 * stm32-trigger
   - buglet in reading the sampling frequency
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAljw8ScRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FojZvBAAh8K9e+3ObpS6/0wj26/XsakiFn4v2ah0
 xKUnafxAVVxU3AU01IJ3CtNdIMyqMwpnB+PvnpgDzZw749QrYKPsBIzheK64eabe
 fzA34X5MWGLwUdOXpfEB0xvsylWjJrqsf1rahgZjiUKkPeZe9EwzPM/fP1sEl5gu
 p+vfSMckboFaKheoQwnWMUTBp0HK+nbFpcSBzljX68u+epiXpDGrjuZC8NJ3JuBn
 Bloz9AhDliIn477H7mIUTXBbt3ixLIDiJ7haQuTNlagosPoUtCBpwY2O9mZ7VRVs
 wM62h7/F170077ReQJRjlfck+7uHoIgDeS46w5UYTzA1HJLxs+veO5xv3VOtHIUg
 BZ+mibQyIUBrFeyYDVbeUpBTffiU6rA+yiM4WFwUFabl7t7rlG0NhLEx7OIQcFMm
 l8u/5JUoJcoykaO8c9Jx5XtrgkXq+rCWVAmhjHqUDAlvsMa6pJWEyqgaVcQeIbdw
 ns9ppJRlOmEst7lMab9TI7BJp3oCIH6uRmctbme42Rw8XgDFdltxqkxmjB8d+cDC
 Q0INhNJN1jRgz6rT6lkxVhAYKtaP5T8qZeliT4MO1E59ggOVSSf8zuhjrEMUK397
 Tu/k7fmATtiKSG+blwYZVRC3+ixh/oKZsvfwZ4O+mFJyhQ616nKMYAywoaZcM8WT
 Z1ABipUDwsE=
 =H5KS
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-4.11e' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Fifth set of IIO fixes for the 4.11 cycle.

As these are rather late in the cycle, they may sneak over into 4.12.
There is a fix for a regression caused by another fix (hid sensors
hardware seems to vary a lot in how various corner cases are handled).

* ad7303
  - fix channel description. Numeric values were being passed as characters
  presumably leading to garbage from the userspace interface.
* as3935
  - the write data macro was wrong so fix it.
* bmp280
  - incorrect handling of negative values as being unsigned broke humidity
  calculation.
* hid-sensor
  - Restore the poll and hysteresis values after resume as some hardware
  doesn't do it.
* stm32-trigger
  - buglet in reading the sampling frequency
2017-04-18 19:38:38 +02:00
Matt Ranostay 84ca8e364a iio: proximity: as3935: fix as3935_write
AS3935_WRITE_DATA macro bit is incorrect and the actual write
sequence is two leading zeros.

Cc: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-04-14 14:48:58 +01:00
simran singhal 7ab89e1e23 iio: proximity: as3935: constify attribute_group structures
Check for attribute_group structures that are only stored in the
attrs filed of iio_info structure. As the attrs field of iio_info
structures is constant, so these attribute_group structures can also be
declared constant.
Done using coccinelle:

@r1 disable optional_qualifier @
identifier i;
position p;
@@
static struct attribute_group i@p = {...};

@ok1@
identifier r1.i;
position p;
struct iio_info x;
@@
x.attrs=&i@p;

@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
static
+const
struct attribute_group i={...};

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct attribute_group i;

File size before:
   text	   data	    bss	    dec	    hex	filename
   4037	    288	      0	   4325	   10e5	drivers/iio/proximity/as3935.o

File size after:
   text	   data	    bss	    dec	    hex	filename
   4101	    256	      0	   4357	   1105	drivers/iio/proximity/as3935.o

Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-04-01 11:26:10 +01:00
Lars-Peter Clausen b2027d16df iio: pulsedlight-lidar-lite-v2: Set parent device
Initialize the parent of the IIO device to the device that registered it.
This makes sure that the IIO device appears the right level in the device
hierarchy.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-02-19 12:02:31 +00:00
Andreas Klinger feda284004 iio: distance: add devantech us ranger srf04
This patch adds support for the ultrasonic ranger srf04 of devantech.

This device is measuring the distance of objects in a range between 1 cm
and 3 meters and a theoretical resolution of 3 mm.

There are two GPIOs used:
  - trigger: set as output to the device when the measurement should start
  - echo: set by the device when the ultrasonic wave is sent out and reset
    when the echo is recognized; this needs to be an interrupt input

The time between setting and resetting the echo pin is the time the
waveform needed for one round trip. This time is recorded in the interrupt
handler.

The distance is calculated in the read function by using the ultrasonic
speed at 20 degrees celsius which is about 343 m/s.

Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-02-04 12:19:20 +00:00
Andreas Klinger 78f839029e iio: distance: srf08: add IIO driver for us ranger
This is the IIO driver for devantech srf08 ultrasonic ranger which can be
used to measure the distances to an object.

The sensor supports I2C with some registers.

Supported Features include:
 - read the distance in ranging mode in centimeters
 - output of the driver is directly the read value
 - together with the scale the driver delivers the distance in meters
 - only the first echo of the nearest object is delivered
 - set sensitivity as analog value in the range of 0-31  means setting
   gain register on device
 - set range registers; userspace enters max. range in millimeters in
   43 mm steps

Features not supported by this driver:
 - ranging mode in inches or in microseconds
 - ANN mode
 - change I2C address through this driver
 - light sensor

The driver was added in the directory "proximity" of the iio subsystem and
the menu in den config is now called "Proximity and distance sensors"

Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-28 16:38:24 +00:00
Alison Schofield 6b2e7589b8 iio: proximity: sx9500: claim direct mode during raw proximity reads
Driver was checking for direct mode but not locking it.  Use the
claim/release helper functions to guarantee the device stays in
direct mode during raw reads of proximity data.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Reviewed-by: Vlad Dogaru <ddvlad@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-21 12:21:53 +00:00
Matt Ranostay b257c1a45e iio: pulsedlight-lidar-lite-v2: add lidar-lite-v3 property
Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-12-31 15:18:31 +00:00
Matt Ranostay a84a6a8aa0 iio: proximity: pulsedlight-lidar-lite-v2: cleanup power management
Remove pm_runtime_mark_last_busy() call that wasn't need in the probe
since the device should be put to sleep.

Clarification from Matt:
Basically it going to be suspended once pm_runtime_idle() is called,
and setting the last busy is useless and not needed.
Clearly this doesn't affect the device running but just makes the code
more consistent with other uses.

Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-23 19:34:26 +01:00
Greg Kroah-Hartman 552edf8d79 Second set of iio new device support, features and cleanups for the 4.9 cycle.
New device support
 * ad8801 dac
   - new driver supporting ad8801 and ad8803 DACs.
 * adc12138
   - new driver supporting TI adc12130/adc12132 and adc12138 ADCs.
 * ltc2485 adc
   - new driver
 * mxc6255
   - add support for the mxc6225 part name and fixup the ID check so it works.
 * vz89x VOC sensor
   - add support for the vz89te part which drops the voc_short channel and adds
     CRCs compared to other supported parts.
 
 New features
 * core
   - immutable triggers.  These effectively grant exclusive control over a
     trigger. The typical usecase is a device representing an analog part
     (perhaps a MUX) that needs to control the sampling of a downstream
     ADC.
   - resource managed trigger registration and triggered_buffer_init.
   - iio_push_event now protected against case of the event interface
     registration not having yet occured.  Only matters if an interrupt
     can occur during this window - might happen on shared interrupt lines.
   - helper to let a driver query if the trigger it is using is provided by
     itself (using the convention of both device and trigger having the same
     parent).
 * tools
   - iio-utils. Used channel modifier scaling in preference to generic scaling
     when both exist.
 * at91-adc
   - Add support for touchscreen switches closure time needed by some newer
     parts.
 * stx104
   - support the ADC channels on this ADC/DAC board. As these are the primary
     feature of the board also move the driver to the iio/adc directory.
 * sx9500
   - device tree bindings.
 
 Cleanups / Fixes
 * ad5755
   - fix an off-by-one on devnr limit check (introduced earlier this cycle)
 * ad7266
   - drop NULL check on devm_regulator_get_optional as it can't return NULL.
 * ak8974
   - avoid an unused functional warning due to rework in PM core code.
   - remove .owner field setting as done by i2c_core.
 * ina2xx
   - clear out a left over debug field from chip global data.
 * hid-sensors
   - avoid an unused functional warning due to rework in PM core code.
 * maxim-thermocouple
   - fix non static symbol warnings.
 * ms5611
   - fetch and enable regulators unconditionally when they aren't optional.
 * sca3000
   - whitespace cleanup.
 * st_sensors
   - fetch and enable regulators unconditionally rather than having them
     supported as optional regulators (missunderstanding on my part amongst
     others a while back)
   - followup to previous patch fixes error checking on the regulators.
   - mark symbols static where possible.
   - use the 'is it my trigger' help function.  This prevents the odd case
     of another device triggering from the st-sensors trigger whilst the
     st-sensors trigger is itself not using it but rather using say an hrtimer.
 * ti-ads1015
   - add missing of_node_put.
 * vz89x
   - rework to all support of new devices.
   - prevent reading of a corrupted buffer.
   - fixup a return value of 0/1 in a bool returning function.
 
 Address updates
 - Vlad Dogaru email address change.
 -----BEGIN PGP SIGNATURE-----
 
 iQIuBAABCAAYBQJX1wW9ERxqaWMyM0BrZXJuZWwub3JnAAoJEFSFNJnE9BaII9UP
 /jXkXtaL62pvipMuEujmpR7j/A+GhmSWHhnbJ9XXeGZStGMUummTyaM+6WZoCKUH
 bMtZh/ETsn+FI7mD7P/FtwHauoxSmndcaAfB6cDKQMVakbXbz4VHrim256cY3gvq
 dzF5nYX+wDue6D7k55VPrtV1isBfipeCXKBtzBlAXaVE2FK2qKP+PIlAln8Ql5/l
 b5B3pvqu0YVED4t2MzyVWcVidPOEh9GgwHu7Ba+kjVi6zuB4w+r5ZreIObb5IR54
 FDcEwL6vV9AlmX15Pc18NO+50bZ8TvgT4y7ISqaOwszaIEoDAc0hXT7TdUOscmtt
 LIbhzHVMVkPSjxvtpz2ui8GfqzhxLi3ZzfNHRegOqH4b2Cpoh4zdwn7nCyJEHZV5
 simAL00FGjzp6B4Zp+Ly6ygKzpF3iXZce0Qjlr/ge+ioNIrfuK10sdLw8NZA5GUB
 JcFYijcFLUb0Cu/KjZ7njlfdAN9Tt94xzpnllM8+j4M50Nhbw05YNhIxB7RxmeSH
 Y44/oBLG51SgtlIg5Z4rULRAcOC5dty73Inb0n4lbN/pjgIcnh+EYtPeI2fA8vyB
 XYqr4xx+A3ZX1yKpYLYO+JYtVsVq9RGYdb501uBhEE3/GWEpxZvbyqHnPwwfM+Pf
 ZNuBceBxM3yyi4Z/lKkZnQbaF/1fFoG7FO1n6iRpb8Ci
 =V1xL
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.9b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of iio new device support, features and cleanups for the 4.9 cycle.

New device support
* ad8801 dac
  - new driver supporting ad8801 and ad8803 DACs.
* adc12138
  - new driver supporting TI adc12130/adc12132 and adc12138 ADCs.
* ltc2485 adc
  - new driver
* mxc6255
  - add support for the mxc6225 part name and fixup the ID check so it works.
* vz89x VOC sensor
  - add support for the vz89te part which drops the voc_short channel and adds
    CRCs compared to other supported parts.

New features
* core
  - immutable triggers.  These effectively grant exclusive control over a
    trigger. The typical usecase is a device representing an analog part
    (perhaps a MUX) that needs to control the sampling of a downstream
    ADC.
  - resource managed trigger registration and triggered_buffer_init.
  - iio_push_event now protected against case of the event interface
    registration not having yet occured.  Only matters if an interrupt
    can occur during this window - might happen on shared interrupt lines.
  - helper to let a driver query if the trigger it is using is provided by
    itself (using the convention of both device and trigger having the same
    parent).
* tools
  - iio-utils. Used channel modifier scaling in preference to generic scaling
    when both exist.
* at91-adc
  - Add support for touchscreen switches closure time needed by some newer
    parts.
* stx104
  - support the ADC channels on this ADC/DAC board. As these are the primary
    feature of the board also move the driver to the iio/adc directory.
* sx9500
  - device tree bindings.

Cleanups / Fixes
* ad5755
  - fix an off-by-one on devnr limit check (introduced earlier this cycle)
* ad7266
  - drop NULL check on devm_regulator_get_optional as it can't return NULL.
* ak8974
  - avoid an unused functional warning due to rework in PM core code.
  - remove .owner field setting as done by i2c_core.
* ina2xx
  - clear out a left over debug field from chip global data.
* hid-sensors
  - avoid an unused functional warning due to rework in PM core code.
* maxim-thermocouple
  - fix non static symbol warnings.
* ms5611
  - fetch and enable regulators unconditionally when they aren't optional.
* sca3000
  - whitespace cleanup.
* st_sensors
  - fetch and enable regulators unconditionally rather than having them
    supported as optional regulators (missunderstanding on my part amongst
    others a while back)
  - followup to previous patch fixes error checking on the regulators.
  - mark symbols static where possible.
  - use the 'is it my trigger' help function.  This prevents the odd case
    of another device triggering from the st-sensors trigger whilst the
    st-sensors trigger is itself not using it but rather using say an hrtimer.
* ti-ads1015
  - add missing of_node_put.
* vz89x
  - rework to all support of new devices.
  - prevent reading of a corrupted buffer.
  - fixup a return value of 0/1 in a bool returning function.

Address updates
- Vlad Dogaru email address change.
2016-09-14 20:42:03 +02:00
Greg Kroah-Hartman 9c2edd8b5b Merge 4.8-rc5 into staging-next
We want the staging fixes in here as well to handle merge issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-05 08:13:24 +02:00
Christoph Fritz a5c8b11a36 iio: sx9500: add final devicetree support
This makes sx9500 driver usable on devicetree based platforms too.

Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Vlad Dogaru <ddvlad@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-03 15:26:28 +01:00
Daniel Wagner 8c11e16177 iio: sx9500: Use complete() instead of complete_all()
There is only one waiter for the completion, therefore there
is no need to use complete_all(). Let's make that clear by
using complete() instead of complete_all().

The usage pattern of the completion is:

waiter context                          waker context

sx9500_read_proximity()
  sx9500_inc_chan_users()
  sx9500_inc_data_rdy_users()
  wait_for_completion_interruptible()

                                        s9500_irq_thread_handler()
                                          complete()

  reinit_completion()

Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-08-15 18:01:27 +01:00
Alison Schofield f8adf645db iio: proximity: as3935: set up buffer timestamps for non-zero values
Use the iio_pollfunc_store_time parameter during triggered buffer
set-up to get valid timestamps.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-08-15 15:39:27 +01:00
Gregor Boirie bc2b7dab62 iio:core: timestamping clock selection support
Adds a new per-device sysfs attribute "current_timestamp_clock" to allow
userspace to select a particular POSIX clock for buffered samples and
events timestamping.

Following clocks, as listed in clock_gettime(2), are supported:
CLOCK_REALTIME, CLOCK_MONOTONIC, CLOCK_MONOTONIC_RAW,
CLOCK_REALTIME_COARSE, CLOCK_MONOTONIC_COARSE, CLOCK_BOOTTIME and
CLOCK_TAI.

Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Acked-by: Sanchayan Maity <maitysanchayan@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-30 19:41:38 +01:00
Greg Kroah-Hartman 3c9a6793bd Second round of new iio device support, features and cleanups in the 4.8 cycle
Firstly some contact detail updates:
 * NXP took over freescale. Update the mma8452 header to reflect this.
 * Martin Kepplinger email address change in mma8452 header.
 * Adriana Reus has changed email address. Update .mailmap.
 * Matt Ranostay has changed email address. Update .mailmap.
 
 New Device Support
 * max1363
   - add the missing i2c_device_ids for a couple of parts so they can actually
     be used.
 * ms5867
   - add device ids for ms5805 and ms5837 parts.
 
 New Features
 * ad5755
   - DT support.  This one was a bit controversial and under review for a long
     time.  Still no one could come up with a better solution.
 * stx104
   - add gpio support
 * ti-adc081c
   - Add ACPI device ID matching.
 
 Core changes
 * Refuse to register triggers with duplicate names.  There is no way to
   distinguish between them so this makes no sense.  A few drivers do not
   generate unique names for each instance of the device present.  We can't
   fix this without changing ABI so leave them and wait for someone to
   actually take the rare step of two identical accelerometers on the same
   board.
 * buffer-dma
   - use ARRAY_SIZE in a few appropriate locations.
 
 Tools
 * Fix the fact that the --trigger-num option in generic_buffer didn't allow
   0 which is perfectly valid in the ABI.
 
 Cleanups
 * as3935
   - improve error reporting.
   - remove redundant zeroing of a field in iio_priv.
 * gp2ap020a00f
   - use the iio_device_claim_*_mode helpers rather than open coding locking
   around mode changes.
 * isl29125
   - use the iio_device_claim_*_mode helpers rather than open coding locking.
 * lidar
   - use the iio_device_claim_*_mode helpers rather than open coding locking.
 * mma8452
   - more detail in devices supported description in comments (addresses and
   similar)
 * sca3000
   - add a missing error check.
 * tcs3414
   - use the iio_device_claim_*_mode helpers rather than open coding locking.
 * tcs3472
   - use the iio_device_claim_*_mode helpers rather than open coding locking.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXdAT2AAoJEFSFNJnE9BaIq68P/3Z0q1lc1cb+K8HV5jgukEKw
 eoxZa5lFIOuHAGeXo9GAdJiH5oT/yAIhadf3gzuuQLaTJwWYKD51aPVwgpT5M2+x
 Bnu2XiYcaoIm/Foat70ycjeYaGxO/xO2vbLp5v0BJV2ujvjm/oCKw5pxYeU4Jm63
 iKaZo9jn/HoshOMpZBrcPZ7Q1TogRdopBNe2fsc8nXFFsv8ODjOZ9Nebs2lk36e+
 PWLUWfSkv2LMBSE2LOFyjSW8E4ItBBngBcyqBTFiiln7mpXU5Vv2QSvUhpP2YjUZ
 rxKvDiG7ADuxMr901whASxyCO180yCxTRIcBsN8oP73gTGHrJnMT0Sptfz7AUUVN
 gJneiy+iy3TecJ/R6w/DnNzqmZMiEVqlYGkdXVGu8SXrKWilvzcTp5iTmDVM5zLb
 1fDZxjbLdNJuHzoSYNiCBcnfzIixOAyKTGFi3jUaPPQ/Lc1qfmgerWWlOzKeUgCZ
 5Bzak8MvWuxcO7jkMG8mbARufy3Nu6eh8a39JXFhViGtTtySydMa8eXdYPjqoAtv
 vgwJNh9U53yYui8i7vU90dM3gJaGg5a4R6EjEKCYcEJf6kM9Go8xCvjU8YWPtIKk
 rfykpPkKcQzbax07YKvb4f015x7r0V6WCGJjPn0Fi14ugNGJJ6M88l+2UcXcx1zS
 RRtVRD49Le7pIDCs1Rqn
 =6Lja
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.8b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second round of new iio device support, features and cleanups in the 4.8 cycle

Firstly some contact detail updates:
* NXP took over freescale. Update the mma8452 header to reflect this.
* Martin Kepplinger email address change in mma8452 header.
* Adriana Reus has changed email address. Update .mailmap.
* Matt Ranostay has changed email address. Update .mailmap.

New Device Support
* max1363
  - add the missing i2c_device_ids for a couple of parts so they can actually
    be used.
* ms5867
  - add device ids for ms5805 and ms5837 parts.

New Features
* ad5755
  - DT support.  This one was a bit controversial and under review for a long
    time.  Still no one could come up with a better solution.
* stx104
  - add gpio support
* ti-adc081c
  - Add ACPI device ID matching.

Core changes
* Refuse to register triggers with duplicate names.  There is no way to
  distinguish between them so this makes no sense.  A few drivers do not
  generate unique names for each instance of the device present.  We can't
  fix this without changing ABI so leave them and wait for someone to
  actually take the rare step of two identical accelerometers on the same
  board.
* buffer-dma
  - use ARRAY_SIZE in a few appropriate locations.

Tools
* Fix the fact that the --trigger-num option in generic_buffer didn't allow
  0 which is perfectly valid in the ABI.

Cleanups
* as3935
  - improve error reporting.
  - remove redundant zeroing of a field in iio_priv.
* gp2ap020a00f
  - use the iio_device_claim_*_mode helpers rather than open coding locking
  around mode changes.
* isl29125
  - use the iio_device_claim_*_mode helpers rather than open coding locking.
* lidar
  - use the iio_device_claim_*_mode helpers rather than open coding locking.
* mma8452
  - more detail in devices supported description in comments (addresses and
  similar)
* sca3000
  - add a missing error check.
* tcs3414
  - use the iio_device_claim_*_mode helpers rather than open coding locking.
* tcs3472
  - use the iio_device_claim_*_mode helpers rather than open coding locking.
2016-06-29 15:35:01 -07:00
Matt Ranostay 4d462b85e7 iio: proximity: as3935: remove redundant zeroing of tune_cap
This is redundant as the containing stucture is allocated as part of
iio_device_alloc using kzalloc and hence is already 0.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-27 20:59:12 +01:00
Arnd Bergmann 22ed1a1c1c iio: as3935: improve error reporting in as3935_event_work
gcc warns about a potentially uninitialized variable use
in as3935_event_work:

drivers/iio/proximity/as3935.c: In function ‘as3935_event_work’:
drivers/iio/proximity/as3935.c:231:6: error: ‘val’ may be used uninitialized in this function [-Werror=maybe-uninitialized]

This case specifically happens when spi_w8r8() fails with a
negative return code. We check all other users of this function
except this one.

As the error is rather unlikely to happen after the device
has already been initialized, this just adds a dev_warn().
Another warning already exists in the same function, but is
missing a trailing '\n' character, so I'm fixing that too.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-27 20:59:10 +01:00
Greg Kroah-Hartman af52739b92 Merge 4.7-rc4 into staging-next
We want the fixes in here, and we can resolve a merge issue in
drivers/iio/industrialio-trigger.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-20 08:25:44 -07:00
Matt Ranostay 9e18265443 iio: proximity: lidar: switch to iio_device_claim_*_mode helpers
Switch from using indio_dev->mlock to the iio_device_claim_*_mode
helper functions.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-06-11 17:08:20 +01:00
Matt Ranostay 90e9a9500f iio: proximity: as3935: remove redundant MODULE_ALIAS
MODULE_ALIAS isn't needed since the module name is the same as the alias
defined.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-29 20:09:43 +01:00
Matt Ranostay 37b1ba2c68 iio: proximity: as3935: fix buffer stack trashing
Buffer wasn't of a valid size to allow the timestamp, and correct padding.
This patchset also moves the buffer off the stack, and onto the heap.

Cc: george.mccollister@gmail.com
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-05-22 20:54:15 +01:00