Commit Graph

27 Commits

Author SHA1 Message Date
Jeffy Chen 500f9ff518 mfd: syscon: Set name of regmap_config
We are now allowing to register debugfs without a valid device, and not
having a valid name will end up using "dummy*" to create debugfs dir.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-05-16 09:21:48 +01:00
David Lechner 408d1d570a mfd: syscon: Set regmap name to DT node name
This sets the regmap name to the device tree node name. This is useful
for debugging.

Signed-off-by: David Lechner <david@lechnology.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-05-16 09:21:48 +01:00
Baolin Wang 3bafc09e77
mfd: syscon: Add hardware spinlock support
Some system control registers need hardware spinlock to synchronize
between the multiple subsystems, so we should add hardware spinlock
support for syscon.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-12 18:32:55 +00:00
Paul Burton d29ccdb3f0 mfd: syscon: Support native-endian regmaps
The regmap devicetree binding documentation states that a native-endian
property should be supported as well as big-endian & little-endian,
however syscon in its duplication of the parsing of these properties
omits support for native-endian. Fix this by setting
REGMAP_ENDIAN_NATIVE when a native-endian property is found.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-11-25 10:04:31 +00:00
Philipp Zabel c131045d5b mfd: syscon: Make syscon_regmap_config const
syscon_regmap_config can be made const if syscon_probe() creates a local
copy on the stack, just like syscon_register() does.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16 08:50:18 +00:00
Philipp Zabel ca668f0edf mfd: syscon: Set regmap max_register in of_syscon_register
Determine the regmap max_register configuration from the io resource size
and the reg-io-width device tree property.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-03-16 08:50:17 +00:00
Damien Riegel db2fb60cd3 mfd: syscon: Add a DT property to set value width
Currently syscon has a fixed configuration of 32 bits for register and
values widths. In some cases, it would be desirable to be able to
customize the value width.

For example, certain boards (like the ones manufactured by Technologic
Systems) have a FPGA that is memory-mapped, but its registers are only
16-bit wide.

This patch adds an optional "reg-io-width" DT binding for syscon that
allows to change the width for the data bus (i.e. val_bits). If this
property is provided, it will also set the register stride to
reg-io-width's value. If not provided, the default configuration is
used.

Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-11 06:08:02 +00:00
Linus Torvalds e6b5be2be4 Driver core patches for 3.19-rc1
Here's the set of driver core patches for 3.19-rc1.
 
 They are dominated by the removal of the .owner field in platform
 drivers.  They touch a lot of files, but they are "simple" changes, just
 removing a line in a structure.
 
 Other than that, a few minor driver core and debugfs changes.  There are
 some ath9k patches coming in through this tree that have been acked by
 the wireless maintainers as they relied on the debugfs changes.
 
 Everything has been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSOD20ACgkQMUfUDdst+ylLPACg2QrW1oHhdTMT9WI8jihlHVRM
 53kAoLeteByQ3iVwWurwwseRPiWa8+MI
 =OVRS
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core update from Greg KH:
 "Here's the set of driver core patches for 3.19-rc1.

  They are dominated by the removal of the .owner field in platform
  drivers.  They touch a lot of files, but they are "simple" changes,
  just removing a line in a structure.

  Other than that, a few minor driver core and debugfs changes.  There
  are some ath9k patches coming in through this tree that have been
  acked by the wireless maintainers as they relied on the debugfs
  changes.

  Everything has been in linux-next for a while"

* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
  Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
  fs: debugfs: add forward declaration for struct device type
  firmware class: Deletion of an unnecessary check before the function call "vunmap"
  firmware loader: fix hung task warning dump
  devcoredump: provide a one-way disable function
  device: Add dev_<level>_once variants
  ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
  ath: use seq_file api for ath9k debugfs files
  debugfs: add helper function to create device related seq_file
  drivers/base: cacheinfo: remove noisy error boot message
  Revert "core: platform: add warning if driver has no owner"
  drivers: base: support cpu cache information interface to userspace via sysfs
  drivers: base: add cpu_device_create to support per-cpu devices
  topology: replace custom attribute macros with standard DEVICE_ATTR*
  cpumask: factor out show_cpumap into separate helper function
  driver core: Fix unbalanced device reference in drivers_probe
  driver core: fix race with userland in device_add()
  sysfs/kernfs: make read requests on pre-alloc files use the buffer.
  sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
  fs: sysfs: return EGBIG on write if offset is larger than file size
  ...
2014-12-14 16:10:09 -08:00
Pankaj Dubey bdb0066df9 mfd: syscon: Decouple syscon interface from platform devices
Currently a syscon entity can be only registered directly through a
platform device that binds to a dedicated syscon driver. However in
certain use cases it is desirable to make a device used with another
driver a syscon interface provider.

For example, certain SoCs (e.g. Exynos) contain system controller
blocks which perform various functions such as power domain control,
CPU power management, low power mode control, but in addition contain
certain IP integration glue, such as various signal masks,
coprocessor power control, etc. In such case, there is a need to have
a dedicated driver for such system controller but also share registers
with other drivers. The latter is where the syscon interface is helpful.

In case of DT based platforms, this patch decouples syscon object from
syscon platform driver, and allows to create syscon objects first time
when it is required by calling of syscon_regmap_lookup_by APIs and keep
a list of such syscon objects along with syscon provider device_nodes
and regmap handles.

For non-DT based platforms, this patch keeps syscon platform driver
structure so that syscon can be probed and such non-DT based drivers
can use syscon_regmap_lookup_by_pdev API and access regmap handles.
Once all users of "syscon_regmap_lookup_by_pdev" migrated to DT based,
we can completely remove platform driver of syscon, and keep only helper
functions to get regmap handles.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Tomasz Figa <tomasz.figa@gmail.com>
Tested-by: Vivek Gautam <gautam.vivek@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25 16:18:41 +00:00
Wolfram Sang 78a835416a mfd: drop owner assignment from platform_drivers
A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20 16:20:53 +02:00
Linus Torvalds 1fe9eb1847 Changes to existing drivers:
- Increase DT coverage - arizona, mc13xxx, stmpe-i2c, syscon, sun6i-prcm
  - Regmap use of and/or clean-up - tps65090, twl6040
  - Basic renaming - max14577
  - Use new cpufreq helpers -  db8500-prcmu
  - Increase regulator support - stmpe, arizona, wm5102
  - Reduce legacy GPIO overhead - stmpe
  - Provide necessary remove path - bcm590xx
  - Expand sysfs presence - kempld
  - Move driver specific code out to drivers - rtc-s5m, arizona
  - Clk handling - twl6040
  - Use managed (devm_*) resources - ipaq-micro
  - Clean-up/remove unused/duplicated code - tps65218, sec, pm8921, abx500-core
    		   		     	    db8500-prcmu, menelaus
  - Build/boot/sematic bug fixes - rtsx_usb, stmpe, bcm590xx, abx500, mc13xxx
                                   rdc321x-southbridge, mfd-core, sec, max14577
 				  syscon, cros_ec_spi
  - Constify stuff 		- sm501, tps65910, tps6507x, tps6586x, max77686,
    	    	  		  max8997, kempld, max77693, max8907, rtsx_usb
 				  db8500-prcmu, max8998, wm8400, sec, lp3943,
 				  max14577, as3711, omap-usb-host, ipaq-micro
 Support for new devices:
  - Add support for max77836 into max14577
  - Add support for tps658640 into tps6586x
  - Add support for cros-ec-i2c-tunnel into cros_ec
  - Add new driver for rtsx_usb_sdmmc and rtsx_usb_ms
  - Add new driver for axp20x
  - Add new driver for sun6i-prcm
  - Add new driver for ipaq-micro
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTkEAyAAoJEFGvii+H/HdhYdMP/j0MCmbORM9mr84Uuhi0PfBZ
 yE1zlhLQHtqQEcp4Ih6vWxIbgdhyHy3CqIiCKkhSTH0TWfreBX7DmlSc1QAKazpy
 sXeD/pB5TSIIfAHVh4NXF51WMzZ8OvQrmJQwdjUY1Sal2tlDCUdc84qtnn+3/J9N
 JIKpf4E1IeWojE8F3koKBcyE6ZzkAthIzWNDU9/y+sIZZEqPVRu9Y3mpdhPo6P3I
 9TboZ/s2cAwad56iArFMOCvtg1xpn0WyS0HgAxpSa9X5qLRjYPX5GnBBz8zKJYm3
 xHCiD6SgN29xX9W+MkcvtgEghhMfOkPgwF69u2/eagbtNEOm50cyLrvAe+SKjRvE
 pODs5yvHJap29cbVafHSdzV+zLZ51J/Oi/TFsG8/VBbd4DyW7oSM4juT20TFSiNt
 Edwzd4gicg/NxA7TupFCRQLgwAa3fnpPeCtsIims7LU7SclPuwNgS31isOGAkOvd
 mMaBa1clZb50Dy2iL8m1ugyqdOZXs9S24j3u+B0TTJyabMbNhDTGUwBG4/PrlJHq
 fIysx6CdNUGLikG2PybFvhCf3+FkEoPPtkloM1sblkhPHVunVlhXPRYAE90W2jUA
 dDQ2Aco/idWSGRZ5t7kA8OBN3+PwiIpxTt/D4eDmS7Qe/v3KXvhUYuKl2mD5+IfC
 StFiP5cd3zyJvWTeexuW
 =GYTU
 -----END PGP SIGNATURE-----

Merge tag 'mfd-for-linus-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next

Pull MFD updates from Lee Jones:
 "Changes to existing drivers:
   - increase DT coverage: arizona, mc13xxx, stmpe-i2c, syscon,
     sun6i-prcm
   - regmap use of and/or clean-up: tps65090, twl6040
   - basic renaming: max14577
   - use new cpufreq helpers: db8500-prcmu
   - increase regulator support: stmpe, arizona, wm5102
   - reduce legacy GPIO overhead: stmpe
   - provide necessary remove path: bcm590xx
   - expand sysfs presence: kempld
   - move driver specific code out to drivers: rtc-s5m, arizona
   - clk handling: twl6040
   - use managed (devm_*) resources: ipaq-micro
   - clean-up/remove unused/duplicated code: tps65218, sec, pm8921,
     abx500-core, db8500-prcmu, menelaus
   - build/boot/sematic bug fixes: rtsx_usb, stmpe, bcm590xx, abx500,
     mc13xxx, rdc321x-southbridge, mfd-core, sec, max14577, syscon,
     cros_ec_spi
   - constify stuff: sm501, tps65910, tps6507x, tps6586x, max77686,
     max8997, kempld, max77693, max8907, rtsx_usb, db8500-prcmu,
     max8998, wm8400, sec, lp3943, max14577, as3711, omap-usb-host,
     ipaq-micro

  Support for new devices:
   - add support for max77836 into max14577
   - add support for tps658640 into tps6586x
   - add support for cros-ec-i2c-tunnel into cros_ec
   - add new driver for rtsx_usb_sdmmc and rtsx_usb_ms
   - add new driver for axp20x
   - add new driver for sun6i-prcm
   - add new driver for ipaq-micro"

* tag 'mfd-for-linus-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (77 commits)
  mfd: wm5102: Correct default for LDO Control 2 register
  mfd: menelaus: Use module_i2c_driver
  mfd: tps65218: Terminate of match table
  mfd: db8500-prcmu: Remove check for CONFIG_DBX500_PRCMU_DEBUG
  mfd: ti-keystone-devctrl: Add bindings for device state control
  mfd: palmas: Format the header file
  mfd: abx500-core: Remove unused function abx500_dump_all_banks()
  mfd: arizona: Correct addresses of always-on trigger registers
  mfd: max14577: Cast to architecture agnostic data type
  i2c: ChromeOS EC tunnel driver
  mfd: cros_ec: Sync to the latest cros_ec_commands.h from EC sources
  mfd: cros_ec: spi: Increase cros_ec_spi deadline from 5ms to 100ms
  mfd: cros_ec: spi: Make the cros_ec_spi timeout more reliable
  mfd: cros_ec: spi: Add mutex to cros_ec_spi
  mfd: cros_ec: spi: Calculate delay between transfers correctly
  mfd: arizona: Correct error message for addition of main IRQ chip
  mfd: wm8997: Add registers for high power mode
  mfd: arizona: Add MICVDD to mapped regulators
  mfd: ipaq-micro: Make mfd_cell array const
  mfd: ipaq-micro: Use devm_ioremap_resource()
  ...
2014-06-06 12:08:39 -07:00
Pankaj Dubey 45330bb434 mfd: syscon: Allow property as NULL in syscon_regmap_lookup_by_phandle
If we pass syscon device node itself as first parameter to this function
there is no need to parse and find syscon device node. So by allowing
"property" parameter as NULL allow syscon_regmap_lookup_by_phandle to
consider passed argument "np" itself as a syscon device node "syscon_np".
This will help us in avoiding addition of "syscon" property in a device node
which points back to same device node in device tree.

Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-03 08:11:24 +01:00
Pawel Moll 29f9b6cf7b mfd: syscon: Add platform data with a regmap config name
Define syscon platform data structure that can be used
to define a regmap config name. This is particularly useful
in the regmap debugfs when there is more than one syscon
device registered, to distinguish the register blocks.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
2014-05-15 17:02:19 +01:00
Alexander Shiyan 416dc642af mfd: syscon: Simplify syscon_match_pdevname()
Since we do not want to add new platform IDs for the syscon driver,
there is no reason to iterate over IDs. This patch simplifies
syscon_match_pdevname() function to remove such iteration.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19 08:58:41 +00:00
Alexander Shiyan 38d8974e33 mfd: syscon: Move diagnostic messages to dev_dbg()
This patch moves diagnostic messages used for debugging purposes
to dev_dbg().

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19 08:58:25 +00:00
Linus Torvalds 8de4651abe For the 3.12 merge window we have one new driver for the DA9063 PMIC
from Dialog Semiconductor.
 
 Besides that driver we also have:
 
 - Device tree support for the s2mps11 driver
 
 - More devm_* conversion for the pm8921, max89xx, menelaus, tps65010,
   wl1273 and pcf50633-adc drivers.
 
 - A conversion to threaded IRQ and IRQ domain for the twl6030 driver.
 
 - A fairly big update for the rtsx driver: Better power saving support,
   better vendor settings handling, and a few fixes.
 
 - Support for a couple more boards (COMe-bHL6 and COMe-cTH6) for the
   Kontron driver.
 
 - A conversion to the dev_get_platdata() API for all MFD drivers.
 
 - A removal of non-DT (legacy) support for the twl6040 driver.
 
 - A few fixes and additions (Mic detect level) to the wm5110 register tables.
 
 - Regmap support for the davinci_voicecodec driver.
 
 - The usual bunch of minor cleanups and janitorial fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJSKFnjAAoJEIqAPN1PVmxKU9AP/RAmSYux6c+cd7P7roXL+/lA
 qNKy8Op31J51N/n918o7zwbskmRIJJsbd+I6ClBlYdCUB+B8/Oj41uD4F+q35b/H
 F5Xm2XRPQAGHx37m5adJMrK/OR3zCTwhPjleJYOJWIFjDP/nDNJIPwTYb13Rqurh
 V39icmRtnNR0uDOmv3eELyV4FnWQTpA858dxuhSi+5jbbHFhCcYShEmE9109eexl
 RNuyF8d0KPGvnKhK+H1/k4ZYG2XAFFOZfZz9MB+l651nidqDvwJph0Zdj3w1r112
 8OR5i7B3vw268nmyjOOUtYqL2vOaUW4lavmLTQiSdQWd1BHv9hEmD0RRR5bSrLeH
 6DwCTh0+xWH08ogbMwi4dwZyRhjxMPMpkxeNz51TpRnXKDSZmBgrjovKNJpP8pW6
 m7RsgUC9AiEQf/Ac0PBMrU8ABKeJnt3K3ZZp4YN7/H6rAMOhXjLqFD8JLoFvx08z
 itKKSzVaIA3pzxpnkWWiTsr+bChaSOrHHy1biWa4ve5pvrFc9ivPz1DhL3PTmXpp
 haeeylFG01r5NJIHeJewRsmUJk67aEyeAnnoLwqCRycWjdDmcCBC5bgDBkRRonoS
 93tgKVzL9q/NwvT5Uatw3uYqTN0jOuH0t39gAzu9uwnWvivcZK5EBYh789YQL+on
 zih4qUICM08yWRDNNDgF
 =a7dU
 -----END PGP SIGNATURE-----

Merge tag 'mfd-3.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next

Pull MFD (multi-function device) updates from Samuel Ortiz:
 "For the 3.12 merge window we have one new driver for the DA9063 PMIC
  from Dialog Semiconductor.

  Besides that driver we also have:

   - Device tree support for the s2mps11 driver

   - More devm_* conversion for the pm8921, max89xx, menelaus, tps65010,
     wl1273 and pcf50633-adc drivers.

   - A conversion to threaded IRQ and IRQ domain for the twl6030 driver.

   - A fairly big update for the rtsx driver: Better power saving
     support, better vendor settings handling, and a few fixes.

   - Support for a couple more boards (COMe-bHL6 and COMe-cTH6) for the
     Kontron driver.

   - A conversion to the dev_get_platdata() API for all MFD drivers.

   - A removal of non-DT (legacy) support for the twl6040 driver.

   - A few fixes and additions (Mic detect level) to the wm5110 register
     tables.

   - Regmap support for the davinci_voicecodec driver.

   - The usual bunch of minor cleanups and janitorial fixes"

* tag 'mfd-3.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (81 commits)
  mfd: ucb1x00-core: Rewrite ucb1x00_add_dev()
  mfd: ab8500-debugfs: Apply a check for -ENOMEM after allocating memory for event name
  mfd: ab8500-debugfs: Apply a check for -ENOMEM after allocating memory for sysfs
  mfd: timberdale: Use module_pci_driver
  mfd: timberdale: Remove redundant break
  mfd: timberdale: Staticize local variables
  mfd: ab8500-debugfs: Staticize local variables
  mfd: db8500-prcmu: Staticize clk_mgt
  mfd: db8500-prcmu: Use ANSI function declaration
  mfd: omap-usb-host: Staticize usbhs_driver_name
  mfd: 88pm805: Fix potential NULL pdata dereference
  mfd: 88pm800: Fix potential NULL pdata dereference
  mfd: twl6040: Use regmap for register cache
  mfd: davinci_voicecodec: Provide a regmap for register I/O
  mfd: davinci_voicecodec: Remove unused read and write functions
  mmc: memstick: rtsx: Modify copyright comments
  mmc: rtsx: Clear SD_CLK toggle enable bit if switching voltage fail
  mfd: mmc: rtsx: Change default tx phase
  mfd: pcf50633-adc: Use devm_*() functions
  mfd: rtsx: Copyright modifications
  ...
2013-09-07 20:14:19 -07:00
Alexander Shiyan 5104d2656d ARM: clps711x: Remove the special name for the syscon driver
This is a partial revert of the patch:
"6597619f9c ARM: clps711x: Add support for SYSCON driver".
No reason to make SYSCON driver name unique to that processor.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-13 23:29:09 -07:00
Alexander Shiyan f10111cc83 mfd: syscon: Remove "base" field from private driver data
During a move to use managed resources, the .remove function all was
deemed superfluous which subsequently led to its deletion. As there are
no remaining users of the stored 'base' address we only have to use it
locally during probe.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-07-31 02:02:58 +02:00
Alexander Shiyan 6597619f9c ARM: clps711x: Add support for SYSCON driver
This patch adds support for SYSCON driver for CLPS711X targets.
At this time there are no users for this driver, but it is will
be used as start point to use in CLPS711X drivers and remove
<mach/xx> dependencies.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-11 15:47:45 -07:00
Alexander Shiyan daba96d6f3 mfd: syscon: Fix warnings when printing resource_size_t
Gets rid of these warnings when compile module for 64 bit targets:
  CC      drivers/mfd/syscon.o
  drivers/mfd/syscon.c: In function 'syscon_probe':
  drivers/mfd/syscon.c:155:2: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' [-Wformat]
  drivers/mfd/syscon.c:155:2: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat]

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-09 22:50:44 +02:00
Alexander Shiyan 5ab3a89a74 mfd: syscon: Add non-DT support
This patch allow using syscon driver from the platform data, i.e.
possibility using driver on systems without oftree support.
For search syscon device from the client drivers,
"syscon_regmap_lookup_by_pdevname" function was added.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-05 17:58:22 +02:00
Alexander Shiyan ed21465a09 mfd: syscon: Removed unneeded field "dev" from private driver structure
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-05 17:58:13 +02:00
Fabio Estevam 75177deee9 mfd: syscon: Fix sparse warning
Fix the following sparse warnings:

drivers/mfd/syscon.c:40:15: warning: symbol 'syscon_node_to_regmap' was not declared. Should it be static?
drivers/mfd/syscon.c:56:15: warning: symbol 'syscon_regmap_lookup_by_compatible' was not declared. Should it be static?
drivers/mfd/syscon.c:72:15: warning: symbol 'syscon_regmap_lookup_by_phandle' was not declared. Should it be static?

Cc: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14 00:26:36 +01:00
Bill Pemberton 4740f73fe5 mfd: remove use of __devexit
CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Daniel Walker <dwalker@fifo99.com>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Acked-by: David Brown <davidb@codeaurora.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28 12:22:27 -08:00
Bill Pemberton f791be492f mfd: remove use of __devinit
CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Daniel Walker <dwalker@fifo99.com>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Acked-by: David Brown <davidb@codeaurora.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28 12:20:19 -08:00
Bill Pemberton 84449216b0 mfd: remove use of __devexit_p
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Daniel Walker <dwalker@fifo99.com>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Acked-by: David Brown <davidb@codeaurora.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28 12:16:42 -08:00
Dong Aisheng 87d687301f mfd: Add syscon driver based on regmap
Add regmap based syscon driver.
This is usually used for access misc bits in registers which does not belong
to a specific module, for example, IMX IOMUXC GPR and ANATOP.
With this driver, client can use generic regmap API to access registers
which are registered into syscon.

Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-17 15:24:14 +02:00