Commit Graph

216 Commits

Author SHA1 Message Date
Linus Torvalds 556f12f602 PCI changes for the v3.9 merge window:
Host bridge hotplug
     - Major overhaul of ACPI host bridge add/start (Rafael Wysocki, Yinghai Lu)
     - Major overhaul of PCI/ACPI binding (Rafael Wysocki, Yinghai Lu)
     - Split out ACPI host bridge and ACPI PCI device hotplug (Yinghai Lu)
     - Stop caching _PRT and make independent of bus numbers (Yinghai Lu)
 
   PCI device hotplug
     - Clean up cpqphp dead code (Sasha Levin)
     - Disable ARI unless device and upstream bridge support it (Yijing Wang)
     - Initialize all hot-added devices (not functions 0-7) (Yijing Wang)
 
   Power management
     - Don't touch ASPM if disabled (Joe Lawrence)
     - Fix ASPM link state management (Myron Stowe)
 
   Miscellaneous
     - Fix PCI_EXP_FLAGS accessor (Alex Williamson)
     - Disable Bus Master in pci_device_shutdown (Konstantin Khlebnikov)
     - Document hotplug resource and MPS parameters (Yijing Wang)
     - Add accessor for PCIe capabilities (Myron Stowe)
     - Drop pciehp suspend/resume messages (Paul Bolle)
     - Make pci_slot built-in only (not a module) (Jiang Liu)
     - Remove unused PCI/ACPI bind ops (Jiang Liu)
     - Removed used pci_root_bus (Bjorn Helgaas)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRKS3hAAoJEFmIoMA60/r8xxoP/j1CS4oCZAnBIVT9fKBkis+/
 CENcfHIUKj6J9iMfJEVvqBELvqaLqtpeNwAGMcGPxV7VuT3K1QumChfaTpRDP0HC
 VDRmrjcmfenEK+YPOG7acsrTyqk2wjpLOyu9MKRxtC5u7tF6376KQpkEFpO4haL4
 eUHTxfE76OkrPBSvx3+PUSf6jqrvrNbjX8K6HdDVVlm3sVAQKmYJU/Wphv2NPOqa
 CAMyCzEGybFjr8hDRwvWgr+06c718GMwQUbnrPdHXAe7lMNMrN/XVBmU9ABN3Aas
 icd3lrDs+yPObgcO/gT8+sAZErCtdJ9zuHGYHdYpRbIQj/5JT4TMk7tw/Bj7vKY9
 Mqmho9GR5YmYTRN9f1r+2n5AQ/KYWXJDrRNOnt5/ys5BOM3vwJ7WJ902zpSwtFQp
 nLX+oD/hLfzpnoIQGDuBAoAXp2Kam3XWRgVvG78buRNrPj+kUzimk14a8qQeY+CB
 El6UKuwi5Uv/qgs1gAqqjmZmsAkon2DnsRZa6Fl8NTkDlis7LY4gp9OU38ySFpB+
 PhCmRyCZmDDqTVtwj6XzR3nPQ5LBSbvsTfgMxYMIUSXHa06tyb2q5p4mEIas0OmU
 RKaP5xQqZuTgD8fbdYrx0xgSrn7JHt/j/X//Qs6unlLCWhlpm3LjJZKxyw2FwBGr
 o4Lci+PiBh3MowCrju9D
 =ER3b
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI changes from Bjorn Helgaas:
 "Host bridge hotplug
    - Major overhaul of ACPI host bridge add/start (Rafael Wysocki, Yinghai Lu)
    - Major overhaul of PCI/ACPI binding (Rafael Wysocki, Yinghai Lu)
    - Split out ACPI host bridge and ACPI PCI device hotplug (Yinghai Lu)
    - Stop caching _PRT and make independent of bus numbers (Yinghai Lu)

  PCI device hotplug
    - Clean up cpqphp dead code (Sasha Levin)
    - Disable ARI unless device and upstream bridge support it (Yijing Wang)
    - Initialize all hot-added devices (not functions 0-7) (Yijing Wang)

  Power management
    - Don't touch ASPM if disabled (Joe Lawrence)
    - Fix ASPM link state management (Myron Stowe)

  Miscellaneous
    - Fix PCI_EXP_FLAGS accessor (Alex Williamson)
    - Disable Bus Master in pci_device_shutdown (Konstantin Khlebnikov)
    - Document hotplug resource and MPS parameters (Yijing Wang)
    - Add accessor for PCIe capabilities (Myron Stowe)
    - Drop pciehp suspend/resume messages (Paul Bolle)
    - Make pci_slot built-in only (not a module) (Jiang Liu)
    - Remove unused PCI/ACPI bind ops (Jiang Liu)
    - Removed used pci_root_bus (Bjorn Helgaas)"

* tag 'pci-v3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits)
  PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers
  PCI: Fix PCI Express Capability accessors for PCI_EXP_FLAGS
  ACPI / PCI: Make pci_slot built-in only, not a module
  PCI/PM: Clear state_saved during suspend
  PCI: Use atomic_inc_return() rather than atomic_add_return()
  PCI: Catch attempts to disable already-disabled devices
  PCI: Disable Bus Master unconditionally in pci_device_shutdown()
  PCI: acpiphp: Remove dead code for PCI host bridge hotplug
  PCI: acpiphp: Create companion ACPI devices before creating PCI devices
  PCI: Remove unused "rc" in virtfn_add_bus()
  PCI: pciehp: Drop suspend/resume ENTRY messages
  PCI/ASPM: Don't touch ASPM if forcibly disabled
  PCI/ASPM: Deallocate upstream link state even if device is not PCIe
  PCI: Document MPS parameters pci=pcie_bus_safe, pci=pcie_bus_perf, etc
  PCI: Document hpiosize= and hpmemsize= resource reservation parameters
  PCI: Use PCI Express Capability accessor
  PCI: Introduce accessor to retrieve PCIe Capabilities Register
  PCI: Put pci_dev in device tree as early as possible
  PCI: Skip attaching driver in device_add()
  PCI: acpiphp: Keep driver loaded even if no slots found
  ...
2013-02-25 21:18:18 -08:00
Linus Torvalds 9043a2650c The sweeping change is to make add_taint() explicitly indicate whether to disable
lockdep, but it's a mechanical change.
 
 Cheers,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRJAcuAAoJENkgDmzRrbjxsw0P/3eXb+LddYnx0V0uHYdKpCUf
 4vdW7X0fX3Z+aUK69IWRL/6ahoO4TpaHYGHBDjEoivyQ0GDq14X7JNWsYYt3LdMf
 3wmDgRc2cn/mZOJbFeVpNV8ox5l/xc0CUvV+iQ8tMjfQItXMXgWUFZKMECsXKSO6
 eex3lrw9M2jAX2uL8LQPp9W8xtKu24nSZRC6tH5riE/8fCzi1cZPPAqfxP5c8Lee
 ZXtbCRSyAFENZLpKyMe1PC7HvtJyi5NDn9xwOQiXULZV/VOlvP94DGBLIKCM/6dn
 4QvZxpG0P0uOlpCgRAVLyh/z7g4XY4VF/fHopLCmEcqLsvgD+V2LQpQ9zWUalLPC
 Z+pUpz2vu0gIddPU1nR8R6oGpEdJ8O12aJle62p/RSXWZGx12qUQ+Tamu0tgKcv1
 AsiJfbUGNDYfxgU6sHsoQjl2f68LTVckCU1C1LqEbW/S104EIORtGx30CHM4LRiO
 32kDC5TtgYDBKQAIqJ4bL48ZMh+9W3uX40p7xzOI5khHQjvswUKa3jcxupU0C1uv
 lx8KXo7pn8WT33QGysWC782wJCgJuzSc2vRn+KQoqoynuHGM6agaEtR59gil3QWO
 rQEcxH63BBRDgHlg4FM9IkJwwsnC3PWKL8gbX0uAWXAPMbgapJkuuGZAwt0WDGVK
 +GszxsFkCjlW0mK0egTb
 =tiSY
 -----END PGP SIGNATURE-----

Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull module update from Rusty Russell:
 "The sweeping change is to make add_taint() explicitly indicate whether
  to disable lockdep, but it's a mechanical change."

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  MODSIGN: Add option to not sign modules during modules_install
  MODSIGN: Add -s <signature> option to sign-file
  MODSIGN: Specify the hash algorithm on sign-file command line
  MODSIGN: Simplify Makefile with a Kconfig helper
  module: clean up load_module a little more.
  modpost: Ignore ARC specific non-alloc sections
  module: constify within_module_*
  taint: add explicit flag to show whether lock dep is still OK.
  module: printk message when module signature fail taints kernel.
2013-02-25 15:41:43 -08:00
Rafael J. Wysocki 7113fe74c1 Merge branch 'pm-assorted'
* pm-assorted:
  suspend: enable freeze timeout configuration through sys
  ACPI: enable ACPI SCI during suspend
  PM: Introduce suspend state PM_SUSPEND_FREEZE
  PM / Runtime: Add new helper function: pm_runtime_active()
  PM / tracing: remove deprecated power trace API
  PM: don't use [delayed_]work_pending()
  PM / Domains: don't use [delayed_]work_pending()
2013-02-15 13:58:54 +01:00
Zhang Rui 89a22dadb8 ACPI: enable ACPI SCI during suspend
Enable ACPI SCI during suspend so that SCI can be used
as wake events for PM_SUSPEND_FREEZE.

For S3/S4 transition,
We disable all GPEs in suspend_ops->prepare_late() to
fix a problem that GPEs may trigger SCI  before
arch_suspend_disable_irqs() is run.
So it is safe to leave the SCI enabled until
arch_suspend_irq_disable() is run.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-09 22:30:44 +01:00
Matt Fleming 83e6818974 efi: Make 'efi_enabled' a function to query EFI facilities
Originally 'efi_enabled' indicated whether a kernel was booted from
EFI firmware. Over time its semantics have changed, and it now
indicates whether or not we are booted on an EFI machine with
bit-native firmware, e.g. 64-bit kernel with 64-bit firmware.

The immediate motivation for this patch is the bug report at,

    https://bugs.launchpad.net/ubuntu-cdimage/+bug/1040557

which details how running a platform driver on an EFI machine that is
designed to run under BIOS can cause the machine to become
bricked. Also, the following report,

    https://bugzilla.kernel.org/show_bug.cgi?id=47121

details how running said driver can also cause Machine Check
Exceptions. Drivers need a new means of detecting whether they're
running on an EFI machine, as sadly the expression,

    if (!efi_enabled)

hasn't been a sufficient condition for quite some time.

Users actually want to query 'efi_enabled' for different reasons -
what they really want access to is the list of available EFI
facilities.

For instance, the x86 reboot code needs to know whether it can invoke
the ResetSystem() function provided by the EFI runtime services, while
the ACPI OSL code wants to know whether the EFI config tables were
mapped successfully. There are also checks in some of the platform
driver code to simply see if they're running on an EFI machine (which
would make it a bad idea to do BIOS-y things).

This patch is a prereq for the samsung-laptop fix patch.

Cc: David Airlie <airlied@linux.ie>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Peter Jones <pjones@redhat.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Steve Langasek <steve.langasek@canonical.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Konrad Rzeszutek Wilk <konrad@kernel.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-30 11:51:59 -08:00
Yinghai Lu 92d8aff3a3 PCI/ACPI: acpiphp: Rename alloc_acpiphp_hp_work() to alloc_acpi_hp_work()
Will need to use it for PCI root bridge hotplug support, so rename
*acpiphp* to *acpi* and move to osc.c.  Also make kacpi_hotplug_wq static
after that.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
CC: Len Brown <lenb@kernel.org>
CC: linux-acpi@vger.kernel.org
2013-01-25 14:43:22 -07:00
Rusty Russell 373d4d0997 taint: add explicit flag to show whether lock dep is still OK.
Fix up all callers as they were before, with make one change: an
unsigned module taints the kernel, but doesn't turn off lockdep.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-01-21 17:17:57 +10:30
Linus Torvalds 18dd0bf22b Merge branch 'x86-acpi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 ACPI update from Peter Anvin:
 "This is a patchset which didn't make the last merge window.  It adds a
  debugging capability to feed ACPI tables via the initramfs.

  On a grander scope, it formalizes using the initramfs protocol for
  feeding arbitrary blobs which need to be accessed early to the kernel:
  they are fed first in the initramfs blob (lots of bootloaders can
  concatenate this at boot time, others can use a single file) in an
  uncompressed cpio archive using filenames starting with "kernel/".

  The ACPI maintainers requested that this patchset be fed via the x86
  tree rather than the ACPI tree as the footprint in the general x86
  code is much bigger than in the ACPI code proper."

* 'x86-acpi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  X86 ACPI: Use #ifdef not #if for CONFIG_X86 check
  ACPI: Fix build when disabled
  ACPI: Document ACPI table overriding via initrd
  ACPI: Create acpi_table_taint() function to avoid code duplication
  ACPI: Implement physical address table override
  ACPI: Store valid ACPI tables passed via early initrd in reserved memblock areas
  x86, acpi: Introduce x86 arch specific arch_reserve_mem_area() for e820 handling
  lib: Add early cpio decoder
2012-12-14 10:03:23 -08:00
Rafael J. Wysocki 3ae45a27df ACPI: Make seemingly useless check in osl.c more understandable
There is a seemingly useless check in drivers/acpi/osl.c added by
commit bc73675 (ACPI: fixes a false alarm from lockdep), which really
is necessary to avoid false positive lockdep complaints.  Document
this and rearrange the code related to it so that it makes fewer
checks.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
2012-11-15 00:18:20 +01:00
Toshi Kani 61622accd0 ACPI: Export functions for hot-remove
Exported acpi_os_hotplug_execute() and acpi_bus_hot_remove_device()
so that they can be called from modules for hot-remove operations.

Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-15 00:16:04 +01:00
Thomas Renninger 325a8d3603 ACPI: Create acpi_table_taint() function to avoid code duplication
There are two ways of overriding ACPI tables now, both need to taint the
the kernel.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Link: http://lkml.kernel.org/r/1349043837-22659-6-git-send-email-trenn@suse.de
Cc: Len Brown <lenb@kernel.org>
Cc: Robert Moore <robert.moore@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-09-30 18:03:35 -07:00
Thomas Renninger b2a35003df ACPI: Implement physical address table override
Previous patches stored ACPI tables provided via initrd in a memblock reserved
area.
If a table is loaded and the table type of an initrd provided one matches,
the one from initrd is prefered.
In case of a SSDT table, the OEM table id also has to match.

ACPI tables can be loaded at boot time (static table pointers in XSDT),
but also dynamically any time later via ASL commands load() or loadTable().
The override mechanism always works.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Link: http://lkml.kernel.org/r/1349043837-22659-5-git-send-email-trenn@suse.de
Cc: Len Brown <lenb@kernel.org>
Cc: Robert Moore <robert.moore@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-09-30 18:03:29 -07:00
Thomas Renninger 53aac44c90 ACPI: Store valid ACPI tables passed via early initrd in reserved memblock areas
A later patch will compare them with ACPI tables that get loaded at boot or
runtime and if criteria match, a stored one is loaded.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Link: http://lkml.kernel.org/r/1349043837-22659-4-git-send-email-trenn@suse.de
Cc: Len Brown <lenb@kernel.org>
Cc: Robert Moore <robert.moore@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-09-30 18:03:23 -07:00
Lin Ming bd6f10a5f9 ACPICA: Remove argument of acpi_os_wait_events_complete
Remove the unused argument of acpi_os_wait_events_complete.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-01 11:51:53 -04:00
Thomas Gleixner 9ecf8c0d4f Revert "ACPI: Make ACPI interrupt threaded"
This reverts commit 6fe0d06282.

Paul bisected this regression.

The conversion was done blindly and is wrong, as it does not provide a
primary handler to disable the level type irq on the device level.
Neither does it set the IRQF_ONESHOT flag which handles that at the irq
line level.  This can't be done as the interrupt might be shared, though
we might extend the core to force it.

So an interrupt on this line will wake up the thread, but immediately
unmask the irq after that.  Due to the interrupt being level type the
hardware interrupt is raised over and over and prevents the irq thread
from handling it.  Fail.

request_irq() unfortunately does not refuse such a request and the patch
was obviously never tested with real interrupts.

Bisected-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-18 10:16:27 -07:00
Len Brown d326f44e5f Merge branch 'tboot' into release
Conflicts:
	drivers/acpi/acpica/hwsleep.c

Text conflict between:

2feec47d4c
(ACPICA: ACPI 5: Support for new FADT SleepStatus, SleepControl registers)

which removed #include "actables.h"

and

09f98a825a
(x86, acpi, tboot: Have a ACPI os prepare sleep instead of calling tboot_sleep.)

which removed #include <linux/tboot.h>

The resolution is to remove them both.

Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 16:38:59 -04:00
Len Brown 1a05e46787 Merge branches 'acpica', 'bgrt', 'bz-11533', 'cpuidle', 'ec', 'hotplug', 'misc', 'red-hat-bz-727865', 'thermal', 'throttling', 'turbostat' and 'video' into release
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 16:10:37 -04:00
Jan Beulich e252675fb7 ACPI: consistently use should_use_kmap()
... so that acpi_unmap()'s behavior gets in sync with acpi_map()'s.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 03:51:57 -04:00
Andi Kleen 6fe0d06282 ACPI: Make ACPI interrupt threaded
Some ACPI interrupt actions may need to wait, and it's easiest to
have a thread context for this. So turn the ACPI interrupt
into a threaded interrupt.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 01:41:45 -04:00
Bob Moore f7b004a17c ACPICA: Add acpi_os_physical_table_override interface
This interface allows the host to override a table via a
physical address, instead of the logical address required by
acpi_os_table_override. This simplifies the host implementation.
Initial implementation by Thomas Renninger. ACPICA implementation
creates a single function for table overrides that attempts both
a logical and a physical override.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:44:59 -04:00
Bob Moore 653f4b538f ACPICA: Expand OSL memory read/write interfaces to 64 bits
This change expands acpi_os_read_memory and acpi_os_write_memory to a
full 64 bits. This allows 64 bit transfers via the acpi_read and
acpi_write interfaces. Note: The internal acpi_hw_read and acpi_hw_write
interfaces remain at 32 bits, because 64 bits is not needed to
access the standard ACPI registers.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-22 01:44:54 -04:00
Len Brown e840dfe334 Merge branch 'stable/for-x86-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into tboot 2012-03-22 01:31:09 -04:00
Tang Liang 09f98a825a x86, acpi, tboot: Have a ACPI os prepare sleep instead of calling tboot_sleep.
The ACPI suspend path makes a call to tboot_sleep right before
it writes the PM1A, PM1B values. We replace the direct call to
tboot via an registration callback similar to __acpi_register_gsi.

CC: Len Brown <len.brown@intel.com>
Acked-by: Joseph Cihula <joseph.cihula@intel.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
[v1: Added __attribute__ ((unused))]
[v2: Introduced a wrapper instead of changing tboot_sleep return values]
[v3: Added return value AE_CTRL_SKIP for acpi_os_sleep_prepare]
Signed-off-by: Tang Liang <liang.tang@oracle.com>
[v1: Fix compile issues on IA64 and PPC64]
[v2: Fix where __acpi_os_prepare_sleep==NULL and did not go in sleep properly]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-03-13 14:06:33 -04:00
Myron Stowe ba242d5b1a ACPI, APEI: Add RAM mapping support to ACPI
This patch adds support for RAM to ACPI's mapping capabilities in order
to support APEI error injection (EINJ) actions.

This patch re-factors similar functionality introduced in commit
76da3fb357, bringing it into osl.c in preparation for removing
./drivers/acpi/atomicio.[ch].

Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-21 01:08:38 -05:00
Myron Stowe e615bf5b55 ACPI, APEI: Add 64-bit read/write support for APEI on i386
Base ACPI (CA) currently does not support atomic 64-bit reads and writes
(acpi_read() and acpi_write() split 64-bit loads/stores into two
32-bit transfers) yet APEI expects 64-bit transfer capability, even
when running on 32-bit systems.

This patch implements 64-bit read and write routines for APEI usage.

This patch re-factors similar functionality introduced in commit
04c25997c9, bringing it into the ACPI subsystem in preparation for
removing ./drivers/acpi/atomicio.[ch].  In the implementation I have
replicated acpi_os_read_memory() and acpi_os_write_memory(), creating
64-bit versions for APEI to utilize, as opposed to something more
elegant.  My thinking is that we should attempt to see if we can get
ACPI's CA/OSL changed so that the existing acpi_read() and acpi_write()
interfaces are natively 64-bit capable and then subsequently remove the
replication.

Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-21 01:08:17 -05:00
Len Brown cb7971756b Merge branch 'atomicio-remove' into release 2012-01-18 00:46:30 -05:00
Myron Stowe 6f68c91c55 ACPI: Export interfaces for ioremapping/iounmapping ACPI registers
Export remapping and unmapping interfaces - acpi_os_map_generic_address()
and acpi_os_unmap_generic_address() - for ACPI generic registers that are
backed by memory mapped I/O (MMIO).

The acpi_os_map_generic_address() and acpi_os_unmap_generic_address()
declarations may more properly belong in include/acpi/acpiosxf.h next to
acpi_os_read_memory() but I believe that would require the ACPI CA making
them an official part of the ACPI CA - OS interface.

ACPI Generic Address Structure (GAS) reference (ACPI's fixed/generic
hardware registers use the GAS format):
  ACPI Specification, Revision 4.0, Section 5.2.3.1, "Generic Address
  Structure"

Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 04:35:20 -05:00
Myron Stowe bc9ffce279 ACPI: Fix possible alignment issues with GAS 'address' references
Generic Address Structures (GAS) may reside within ACPI tables which
are byte aligned.  This patch copies GAS 'address' references to a local
variable, which will be naturally aligned, to be used going forward.

ACPI Generic Address Structure (GAS) reference:
  ACPI Specification, Revision 4.0, Section 5.2.3.1, "Generic Address
  Structure"

Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 04:33:40 -05:00
Lin Ming f654c0fefa ACPICA: Add support for region address conflict checking
Allows drivers to determine if any memory or I/O addresses
will conflict with addresses used by ACPI operation regions.
Introduces a new interface, acpi_check_address_range.

http://marc.info/?t=132251388700002&r=1&w=2

Reported-and-tested-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17 03:38:50 -05:00
Prarit Bhargava 6af8bef14d PCI hotplug: acpiphp: Prevent deadlock on PCI-to-PCI bridge remove
I originally submitted a patch to workaround this by pushing all Ejection
Requests and Device Checks onto the kacpi_hotplug queue.

http://marc.info/?l=linux-acpi&m=131678270930105&w=2

The patch is still insufficient in that Bus Checks also need to be added.

Rather than add all events, including non-PCI-hotplug events, to the
hotplug queue, mjg suggested that a better approach would be to modify
the acpiphp driver so only acpiphp events would be added to the
kacpi_hotplug queue.

It's a longer patch, but at least we maintain the benefit of having separate
queues in ACPI.  This, of course, is still only a workaround the problem.
As Bjorn and mjg pointed out, we have to refactor a lot of this code to do
the right thing but at this point it is a better to have this code working.

The acpi core places all events on the kacpi_notify queue.  When the acpiphp
driver is loaded and a PCI card with a PCI-to-PCI bridge is removed the
following call sequence occurs:

cleanup_p2p_bridge()
	    -> cleanup_bridge()
		    -> acpi_remove_notify_handler()
			    -> acpi_os_wait_events_complete()
				    -> flush_workqueue(kacpi_notify_wq)

which is the queue we are currently executing on and the process will hang.

Move all hotplug acpiphp events onto the kacpi_hotplug workqueue.  In
handle_hotplug_event_bridge() and handle_hotplug_event_func() we can simply
push the rest of the work onto the kacpi_hotplug queue and then avoid the
deadlock.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: mjg@redhat.com
Cc: bhelgaas@google.com
Cc: linux-acpi@vger.kernel.org
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-10-14 09:05:31 -07:00
Len Brown 4a8f5058bd Merge branches 'acpica', 'battery', 'boot-irqs', 'bz-24492', 'bz-9528', 'from-akpm', 'kexec-param' and 'misc' into release
Conflicts:
	Documentation/kernel-parameters.txt

Signed-off-by: Len Brown <len.brown@intel.com>
2011-08-02 17:22:09 -04:00
Shaohua Li aa165971c2 ACPI: add missing _OSI strings
Linux supports some optional features, but it should notify the BIOS about
them via the _OSI method.  Currently Linux doesn't notify any, which might
make such features not work because the BIOS doesn't know about them.

Jarosz has a system which needs this to make ACPI processor aggregator
device work.

Reported-by: "Jarosz, Sebastian" <sebastian.jarosz@intel.com>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-08-02 14:52:30 -04:00
Len Brown 8997621bb2 ACPI print OSI(Linux) warning only once
This message gets repeated on some machines:
https://bugzilla.kernel.org/show_bug.cgi?id=29292

Signed-off-by: Len Brown <len.brown@intel.com>
2011-08-02 00:45:48 -04:00
Takao Indoh 4996c02306 ACPI: introduce "acpi_rsdp=" parameter for kdump
There is a problem with putting the first kernel in EFI virtual mode,
it is that when the second kernel comes up it tries to initialize the
EFI again and once we have put EFI in virtual mode we can not really
do that.

Actually, EFI is not necessary for kdump, we can boot the second kernel
with "noefi" parameter, but the boot will mostly fail because 2nd kernel
cannot find RSDP.

In this situation, we introduced "acpi_rsdp=" kernel parameter, so that
kexec-tools can pass the "noefi acpi_rsdp=X" to the second kernel to
make kdump works. The physical address of the RSDP can be got from
sysfs(/sys/firmware/efi/systab).

Signed-off-by: Takao Indoh <indou.takao@jp.fujitsu.com>
Reviewed-by: WANG Cong <amwang@redhat.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-07-16 18:40:16 -04:00
Rafael J. Wysocki 07e49a7a31 ACPI: Fix lockdep false positives in acpi_power_off()
All ACPICA locks are allocated by the same function,
acpi_os_create_lock(), with the help of a local variable called
"lock".  Thus, when lockdep is enabled, it uses "lock" as the
name of all those locks and regards them as instances of the same
lock, which causes it to report possible locking problems with them
when there aren't any.

To work around this problem, define acpi_os_create_lock() as a macro
and make it pass its argument to spin_lock_init(), so that lockdep
uses it as the name of the new lock.  Define this macron in a
Linux-specific file, to minimize the resulting modifications of
the OS-independent ACPICA parts.

This change is based on an earlier patch from Andrea Righi and it
addresses a regression from 2.6.39 tracked as
https://bugzilla.kernel.org/show_bug.cgi?id=38152

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: Borislav Petkov <bp@alien8.de>
Tested-by: Andrea Righi <andrea@betterlinux.com>
Reviewed-by: Florian Mickler <florian@mickler.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-07-13 14:49:09 -04:00
Len Brown 6288cf1e76 Merge branches 'acpica', 'aml-custom', 'bugzilla-16548', 'bugzilla-20242', 'd3-cold', 'ec-asus' and 'thermal-fix' into release 2011-05-29 04:38:48 -04:00
Lin Ming 9f63b88bd7 ACPI: osl, add acpi_os_create_lock interface
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-03-25 04:32:33 -04:00
Len Brown 02e2407858 Merge branch 'linus' into release
Conflicts:
	arch/x86/kernel/acpi/sleep.c

Signed-off-by: Len Brown <len.brown@intel.com>
2011-03-23 02:34:54 -04:00
Rafael J. Wysocki dd87cc53c4 Merge branches 'acpi-iomem', 'acpi-pm' and 'acpi-sci' into acpi-next 2011-02-24 20:00:44 +01:00
Rafael J. Wysocki 23fe36306e ACPI: Avoid calling request_irq() many times for the same interrupt
In principle acpi_os_install_interrupt_handler() may be called
multiple times for different interrupts, either from
acpi_ev_get_gpe_xrupt_block(), or from acpi_ev_install_sci_handler().
However, it always attempts to request the same interrupt,
acpi_gbl_FADT.sci_interrupt and it doesn't check whether or not this
interrupt has already been requested.

Modify this function so that it refuses to request interrupts other
than acpi_gbl_FADT.sci_interrupt and change
acpi_os_remove_interrupt_handler() so that it refuses to free such
interrupts.  Use the observation that the only supported ACPI
interrupt must be equal to acpi_gbl_FADT.sci_interrupt and drop an
unnecessary variable acpi_irq_irq.

This change has been tested on Toshiba Portege R500 and HP nx6325
without introducing any visible problems.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-02-24 19:59:00 +01:00
Rafael J. Wysocki 13606a2de1 ACPI: Introduce acpi_os_get_iomem()
Introduce function acpi_os_get_iomem() that may be used by its callers
to get a reference to an ACPI iomap.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-02-24 19:58:42 +01:00
Rafael J. Wysocki b7c1fadd6c ACPI: Do not use krefs under a mutex in osl.c
The reference counting of ACPI iomaps is carried out entirely under
acpi_ioremap_lock, so it is sufficient to use simple counters instead
of krefs for this purpose.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-02-24 19:58:42 +01:00
Rafael J. Wysocki 7ffd0443f2 ACPI: Make acpi_os_map_memory() avoid creating unnecessary mappings
Modify acpi_os_map_memory() so that it doesn't call acpi_os_ioremap()
unconditionally every time it is executed (except when
acpi_gbl_permanent_mmap is unset), which pretty much defeats the
purpose of maintaining the list of ACPI iomaps in osl.c.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-02-24 19:58:41 +01:00
Rafael J. Wysocki 7fe135dc05 ACPI: Avoid walking the list of memory mappings in osl.c twice in a row
Make acpi_os_unmap_generic_address() use acpi_map_lookup() to find
the desired iomap and drop the reference to it directly (and
eventually remove it if necessary) instead of calling
acpi_os_unmap_memory(), which requires us to walk the list of ACPI
iomaps twice in a row (first, to get the virtual address associated
with the iomap and second, to get the iomap itself).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-02-24 19:58:41 +01:00
Rafael J. Wysocki 7bbb890358 ACPI: Change acpi_ioremap_lock into a mutex
There's no reason why acpi_ioremap_lock has to be a spinlock,
because all of the functions it is used in may sleep anyway and
there's no reason why it should be locked with interrupts off.
Use a mutex instead (that's going to allow us to put some more
operations under the lock later).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-02-24 19:58:41 +01:00
Rafael J. Wysocki 073b4964b3 ACPI: Do not export functions that are only used in osl.c
The functions acpi_os_map_generic_address() and
acpi_os_unmap_generic_address() are only used in drivers/acpi/osl.c,
so make them static and remove the extern definitions of them from
include/linux/acpi_io.h.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-02-24 19:58:41 +01:00
Tejun Heo 43d133c18b Merge branch 'master' into for-2.6.39 2011-02-21 09:43:56 +01:00
Rafael J. Wysocki 884b821fa2 ACPI: Fix acpi_os_read_memory() and acpi_os_write_memory() (v2)
The functions acpi_os_read_memory() and acpi_os_write_memory() do
two wrong things.  First, they shouldn't call rcu_read_unlock()
before the looked up address is actually used for I/O, because in
that case the iomap it belongs to may be removed before the I/O
is done.  Second, if they have to create a new mapping, they should
check the returned virtual address and tell the caller that the
operation failed if it is NULL (in fact, I think they even should not
attempt to map an address that's not present in one of the existing
ACPI iomaps, because that may cause problems to happen when they are
called from nonpreemptible context and their callers ought to know
what they are doing and map the requisite memory regions beforehand).

Make these functions call rcu_read_unlock() when the I/O is complete
(or if it's necessary to map the given address "on the fly") and
return an error code if the requested physical address is not present
in the existing ACPI iomaps and cannot be mapped.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-02-08 23:37:16 +01:00
Tejun Heo 44d2588e11 acpi: kacpi*_wq don't need WQ_MEM_RECLAIM
ACPI workqueues aren't used during memory reclaming.  Use
alloc_workqueue() to create workqueues w/o rescuers.

If the purpose of the separation between kacpid_wq and kacpi_notify_wq
was to give notifications better response time, kacpi_notify_wq can be
dropped and kacpi_wq can be created with higher @max_active.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
2011-02-01 11:42:42 +01:00
Rafael J. Wysocki 2d6d9fd3a5 ACPI: Introduce acpi_os_ioremap()
Commit ca9b600be3 ("ACPI / PM: Make suspend_nvs_save() use
acpi_os_map_memory()") attempted to prevent the code in osl.c and nvs.c
from using different ioremap() variants by making the latter use
acpi_os_map_memory() for mapping the NVS pages.  However, that also
requires acpi_os_unmap_memory() to be used for unmapping them, which
causes synchronize_rcu() to be executed many times in a row
unnecessarily and introduces substantial delays during resume on some
systems.

Instead of using acpi_os_map_memory() for mapping the NVS pages in nvs.c
introduce acpi_os_ioremap() calling ioremap_cache() and make the code in
both osl.c and nvs.c use it.

Reported-by: Jeff Chua <jeff.chua.linux@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20 18:30:17 -08:00