Commit Graph

12 Commits

Author SHA1 Message Date
Dave Hansen 3947be1969 [PATCH] memory hotplug: sysfs and add/remove functions
This adds generic memory add/remove and supporting functions for memory
hotplug into a new file as well as a memory hotplug kernel config option.

Individual architecture patches will follow.

For now, disable memory hotplug when swsusp is enabled.  There's a lot of
churn there right now.  We'll fix it up properly once it calms down.

Signed-off-by: Matt Tolentino <matthew.e.tolentino@intel.com>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:44 -07:00
Hugh Dickins 4c21e2f244 [PATCH] mm: split page table lock
Christoph Lameter demonstrated very poor scalability on the SGI 512-way, with
a many-threaded application which concurrently initializes different parts of
a large anonymous area.

This patch corrects that, by using a separate spinlock per page table page, to
guard the page table entries in that page, instead of using the mm's single
page_table_lock.  (But even then, page_table_lock is still used to guard page
table allocation, and anon_vma allocation.)

In this implementation, the spinlock is tucked inside the struct page of the
page table page: with a BUILD_BUG_ON in case it overflows - which it would in
the case of 32-bit PA-RISC with spinlock debugging enabled.

Splitting the lock is not quite for free: another cacheline access.  Ideally,
I suppose we would use split ptlock only for multi-threaded processes on
multi-cpu machines; but deciding that dynamically would have its own costs.
So for now enable it by config, at some number of cpus - since the Kconfig
language doesn't support inequalities, let preprocessor compare that with
NR_CPUS.  But I don't think it's worth being user-configurable: for good
testing of both split and unsplit configs, split now at 4 cpus, and perhaps
change that to 8 later.

There is a benefit even for singly threaded processes: kswapd can be attacking
one part of the mm while another part is busy faulting.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29 21:40:42 -07:00
Dave Hansen f3519f9194 [PATCH] fix mm/Kconfig spelling
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-17 11:50:01 -07:00
Bob Picco 3e347261a8 [PATCH] sparsemem extreme implementation
With cleanups from Dave Hansen <haveblue@us.ibm.com>

SPARSEMEM_EXTREME makes mem_section a one dimensional array of pointers to
mem_sections.  This two level layout scheme is able to achieve smaller
memory requirements for SPARSEMEM with the tradeoff of an additional shift
and load when fetching the memory section.  The current SPARSEMEM
implementation is a one dimensional array of mem_sections which is the
default SPARSEMEM configuration.  The patch attempts isolates the
implementation details of the physical layout of the sparsemem section
array.

SPARSEMEM_EXTREME requires bootmem to be functioning at the time of
memory_present() calls.  This is not always feasible, so architectures
which do not need it may allocate everything statically by using
SPARSEMEM_STATIC.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:38 -07:00
Bob Picco 802f192e4a [PATCH] SPARSEMEM EXTREME
A new option for SPARSEMEM is ARCH_SPARSEMEM_EXTREME.  Architecture
platforms with a very sparse physical address space would likely want to
select this option.  For those architecture platforms that don't select the
option, the code generated is equivalent to SPARSEMEM currently in -mm.
I'll be posting a patch on ia64 ml which uses this new SPARSEMEM feature.

ARCH_SPARSEMEM_EXTREME makes mem_section a one dimensional array of
pointers to mem_sections.  This two level layout scheme is able to achieve
smaller memory requirements for SPARSEMEM with the tradeoff of an
additional shift and load when fetching the memory section.  The current
SPARSEMEM -mm implementation is a one dimensional array of mem_sections
which is the default SPARSEMEM configuration.  The patch attempts isolates
the implementation details of the physical layout of the sparsemem section
array.

ARCH_SPARSEMEM_EXTREME depends on 64BIT and is by default boolean false.

I've boot tested under aim load ia64 configured for ARCH_SPARSEMEM_EXTREME.
 I've also boot tested a 4 way Opteron machine with !ARCH_SPARSEMEM_EXTREME
and tested with aim.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:05:38 -07:00
Andy Whitcroft d41dee369b [PATCH] sparsemem memory model
Sparsemem abstracts the use of discontiguous mem_maps[].  This kind of
mem_map[] is needed by discontiguous memory machines (like in the old
CONFIG_DISCONTIGMEM case) as well as memory hotplug systems.  Sparsemem
replaces DISCONTIGMEM when enabled, and it is hoped that it can eventually
become a complete replacement.

A significant advantage over DISCONTIGMEM is that it's completely separated
from CONFIG_NUMA.  When producing this patch, it became apparent in that NUMA
and DISCONTIG are often confused.

Another advantage is that sparse doesn't require each NUMA node's ranges to be
contiguous.  It can handle overlapping ranges between nodes with no problems,
where DISCONTIGMEM currently throws away that memory.

Sparsemem uses an array to provide different pfn_to_page() translations for
each SECTION_SIZE area of physical memory.  This is what allows the mem_map[]
to be chopped up.

In order to do quick pfn_to_page() operations, the section number of the page
is encoded in page->flags.  Part of the sparsemem infrastructure enables
sharing of these bits more dynamically (at compile-time) between the
page_zone() and sparsemem operations.  However, on 32-bit architectures, the
number of bits is quite limited, and may require growing the size of the
page->flags type in certain conditions.  Several things might force this to
occur: a decrease in the SECTION_SIZE (if you want to hotplug smaller areas of
memory), an increase in the physical address space, or an increase in the
number of used page->flags.

One thing to note is that, once sparsemem is present, the NUMA node
information no longer needs to be stored in the page->flags.  It might provide
speed increases on certain platforms and will be stored there if there is
room.  But, if out of room, an alternate (theoretically slower) mechanism is
used.

This patch introduces CONFIG_FLATMEM.  It is used in almost all cases where
there used to be an #ifndef DISCONTIG, because SPARSEMEM and DISCONTIGMEM
often have to compile out the same areas of code.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Martin Bligh <mbligh@aracnet.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:04 -07:00
Andy Whitcroft af705362ab [PATCH] generify memory present
Allow architectures to indicate that they will be providing hooks to indice
installed memory areas, memory_present().  Provide prototypes for the i386
implementation.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Martin Bligh <mbligh@aracnet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:04 -07:00
Dave Hansen 785dcd44b6 [PATCH] mm/Kconfig: give DISCONTIG more help text
This gives DISCONTIGMEM a bit more help text to explain what it does, not just
when to choose it.

Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:03 -07:00
Dave Hansen e1785e85b9 [PATCH] mm/Kconfig: hide "Memory Model" selection menu
I got some feedback from users who think that the new "Memory Model" menu is a
little invasive.  This patch will hide that menu, except when
CONFIG_EXPERIMENTAL is enabled *or* when an individual architecture wants it.

An individual arch may want to enable it because they've removed their
arch-specific DISCONTIG prompt in favor of the mm/Kconfig one.

Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:03 -07:00
Dave Hansen 44d0f805c7 [PATCH] sparsemem: fix minor "defaults" issue in mm/Kconfig
The following patch applies on top of 2.6.12-rc2-mm1.  It fixes a minor
user interaction issue, and an early reference to SPARSEMEM.

This "choice" menu would always default to FLATMEM, as it was listed first.
 Move it to the end so that the other defaults have a chance first.

Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:03 -07:00
Dave Hansen 93b7504e3e [PATCH] Introduce new Kconfig option for NUMA or DISCONTIG
There is some confusion that arose when working on SPARSEMEM patch between
what is needed for DISCONTIG vs. NUMA.

Multiple pg_data_t's are needed for DISCONTIGMEM or NUMA, independently.
All of the current NUMA implementations require an implementation of
DISCONTIG.  Because of this, quite a lot of code which is really needed for
NUMA is actually under DISCONTIG #ifdefs.  For SPARSEMEM, we changed some
of these #ifdefs to CONFIG_NUMA, but that broke the DISCONTIG=y and NUMA=n
case.

Introducing this new NEED_MULTIPLE_NODES config option allows code that is
needed for both NUMA or DISCONTIG to be separated out from code that is
specific to DISCONTIG.

One great advantage of this approach is that it doesn't require every
architecture to be converted over.  All of the current implementations
should "just work", only the ones implementing SPARSEMEM will have to be
fixed up.

The change to free_area_init() makes it work inside, or out of the new
config option.

Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:03 -07:00
Dave Hansen 3a9da7655d [PATCH] create mm/Kconfig for arch-independent memory options
With sparsemem being introduced, we need a central place for new
memory-related .config options: mm/Kconfig.  This allows us to remove many
of the duplicated arch-specific options.

The new option, CONFIG_FLATMEM, is there to enable us to detangle NUMA and
DISCONTIGMEM.  This is a requirement for sparsemem because sparsemem uses
the NUMA code without the presence of DISCONTIGMEM.  The sparsemem patches
use CONFIG_FLATMEM in generic code, so this patch is a requirement before
applying them.

Almost all places that used to do '#ifndef CONFIG_DISCONTIGMEM' should use
'#ifdef CONFIG_FLATMEM' instead.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:01 -07:00