sonixb: Bad initialization of sensor for 352x288 mode.
(from Hans de Goede)
sonixj: Clean-up source.
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
sonixb: Better gain for ov6650.
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
gspca: Protect dq_callback() against simultaneous USB exchanges.
Temporary buffer for USB exchanges added in the device struct.
(all) Use a temporary buffer for all USB exchanges.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
gspca: Empty the application queues on streamoff ioctl.
streamon/off and qbuf ioctls may be done by any application.
Don't handle MJPEG pixel format as JPEG.
(thanks to Hans de Goede)
Authorize reqbufs ioctl when streaming.
Bad mutex unlock in poll() when streaming problem.
(thanks to Mauro Carvalho Chehab)
Don't handle 'webcam disconnected' in stream off.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
sonixb: Do auto gain for tas5110 / ov6650 sensors.
pac207: Move the auto_gain function to gspca.
gspca: New function gspca_auto_gain_n_exposure().
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
vc032x: Light frequency was not initialized.
Change the pixel format of bridge VC0321 to V4L2_PIX_FMT_YUV420
('YU12').
Set a bridge to all webcams.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
This patch adds a simple platform camera device. Useful for testing
cameras with SoC camera host drivers. Only one single pixel format
and resolution combination is supported.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
This is V3 of the SuperH Mobile CEU soc_camera driver.
The CEU hardware block is configured in a transparent data fetch
mode, frames are captured from the attached camera and written to
physically contiguous memory buffers provided by the newly added
videobuf-dma-contig queue. Tested on sh7722 and sh7723 processors.
Changes since V2:
- remove SUPERH Kconfig dependency
- move sh_mobile_ceu.h to include/media
- add board callback support with enable_camera()/disable_camera()
- add support for declare_coherent_memory
- rework video memory limit
- more verbose error messages
Changes since V1:
- fixed the CEU driver to work with the newly updated patches
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
This is V3 of the physically contiguous videobuf queues patch.
Useful for hardware such as the SuperH Mobile CEU which doesn't
support scatter gatter bus mastering.
Since it may be difficult to allocate large chunks of physically
contiguous memory after some uptime due to fragmentation, this code
allocates memory using dma_alloc_coherent(). Architectures supporting
dma_declare_coherent_memory() can easily avoid fragmentation issues
by using dma_declare_coherent_memory() to force dma_alloc_coherent()
to allocate from a certain pre-allocated memory area.
Changes since V2
- use dma_handle for physical address
- use "scatter gather" instead of "scatter gatter"
Changes since V1:
- use dev_err() instead of pr_err()
- remember size in struct videobuf_dma_contig_memory
- keep struct videobuf_dma_contig_memory in .c file
- let videobuf_to_dma_contig() return dma_addr_t
- implement __videobuf_sync()
- return statements, white space and other minor fixes
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
This patch moves the spinlock handling from soc_camera.c to the actual
camera host driver. The spinlock_alloc/free callbacks are replaced with
code in init_videobuf(). So far all camera host drivers implement their
own spinlock_alloc/free methods anyway, and videobuf_queue_core_init()
BUGs on a NULL spinlock argument, so, new camera host drivers will not
forget to provide a spinlock when initialising their videobuf queues.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Makes SoC camera videobuf independent. Includes all necessary changes for
PXA camera driver (currently the only driver using soc_camera in the mainline).
These changes are important for the future soc_camera based drivers.
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Fix compiler warning caused by a typo in the tda10023_attach dummy routine.
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
cx18: added in cx18_ir_reset_gpio function for lirc_pvr150 like module. Also
added the ability to reset the IR chip via ioctl like ivtv. This needs the
mutex to protect gpio_dir and gpio_val in struct cx18 as gpio changes can
come from a few different asynchronous sources now.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
cx18: Add locking for struct cx18 GPIO state variables in
anticpation of adding IR microcontroller reset support for
use by external IR modules.
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Fix the build error:
smscoreapi.c:689: error: 'uintptr_t' undeclared
Thanks to Peter Schlaf for reporting this.
Cc: Peter Schlaf <peter.schlaf@web.de>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Fix the following warnings generated by checkpatch.pl:
WARNING: Use #include <linux/io.h> instead of <asm/io.h>
251: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:30:
+#include <asm/io.h>
WARNING: Use #include <linux/scatterlist.h> instead of <asm/scatterlist.h>
1566: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:29:
+#include <asm/scatterlist.h>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
saa7134: add a separate entry for the ASUSTeK P7131 analog only
and do some eeprom detection to escape from the TVFM7135
with the same PCI subsystem on auto detection.
Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
For VIDIOC_G_FMT/VIDIOC_TRY_FMT, the V4L2 API spec states:
"Drivers should not return an error code unless the input is ambiguous"
"Very simple, inflexible devices may even ignore all input and always
return the default parameters."
"When the requested buffer type is not supported drivers return an
EINVAL error code."
i.e. returning errors for unsupported fields is bad, and it's ok to
unconditionally overwrite user-requested settings
This patch makes ov7670 meet that behaviour, and brings it in line with
other drivers e.g. stk-webcam. It also fixes compatibility with (unpatched)
gstreamer.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
This patch fixes some coding style issues.
It also fixes a NULL de-reference on driver unload.
The permissions for the module parameters were changed to 0644.
Signed-off-by: Dean Anderson <dean@sensoray.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
This has been commented out for years, it's about time to get rid of
it.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Add the capability to define device-specific firmware filenames for the SMS1010,
with a mechanism to fall back to the generic firmware if the device-specific
firmware is not present.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Provide an option to enable / disable support for Siano's default usb ids.
This allows the support for Siano's USB IDs to be disabled, so that Siano's
external driver can be used, instead.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Fix the following 64bit build warning:
make[2]: Entering directory `/usr/src/linux-headers-2.6.24-16-generic'
CC [M] smscoreapi.o
smscoreapi.c: In function 'smscore_load_firmware_from_file':
smscoreapi.c:604: warning: format '%d' expects type 'int', but argument 4 has type 'size_t'
CC [M] smsusb.o
smsusb.c: In function 'smsusb1_load_firmware':
smsusb.c:216: warning: format '%d' expects type 'int', but argument 3 has type 'size_t'
smsusb.c:223: warning: format '%d' expects type 'int', but argument 4 has type 'size_t'
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
set MODULE_DESCRIPTION to "Driver for the Siano SMS1XXX USB dongle"
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Add the capability to define device-specific firmware filenames for the SMS1150,
with a mechanism to fall back to the generic firmware if the device-specific
firmware is not present.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
All dmesg spam turned off by default, for now. Values for debug:
(info=1, adv=2 (or-able)
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Set board ID in the usb_device_id table's driver_info field.
Use board name when registering the dvb adapter.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
