Commit Graph

8 Commits

Author SHA1 Message Date
Javier González a4bd217b43 lightnvm: physical block device (pblk) target
This patch introduces pblk, a host-side translation layer for
Open-Channel SSDs to expose them like block devices. The translation
layer allows data placement decisions, and I/O scheduling to be
managed by the host, enabling users to optimize the SSD for their
specific workloads.

An open-channel SSD has a set of LUNs (parallel units) and a
collection of blocks. Each block can be read in any order, but
writes must be sequential. Writes may also fail, and if a block
requires it, must also be reset before new writes can be
applied.

To manage the constraints, pblk maintains a logical to
physical address (L2P) table,  write cache, garbage
collection logic, recovery scheme, and logic to rate-limit
user I/Os versus garbage collection I/Os.

The L2P table is fully-associative and manages sectors at a
4KB granularity. Pblk stores the L2P table in two places, in
the out-of-band area of the media and on the last page of a
line. In the cause of a power failure, pblk will perform a
scan to recover the L2P table.

The user data is organized into lines. A line is data
striped across blocks and LUNs. The lines enable the host to
reduce the amount of metadata to maintain besides the user
data and makes it easier to implement RAID or erasure coding
in the future.

pblk implements multi-tenant support and can be instantiated
multiple times on the same drive. Each instance owns a
portion of the SSD - both regarding I/O bandwidth and
capacity - providing I/O isolation for each case.

Finally, pblk also exposes a sysfs interface that allows
user-space to peek into the internals of pblk. The interface
is available at /dev/block/*/pblk/ where * is the block
device name exposed.

This work also contains contributions from:
  Matias Bjørling <matias@cnexlabs.com>
  Simon A. F. Lund <slund@cnexlabs.com>
  Young Tack Jin <youngtack.jin@gmail.com>
  Huaicheng Li <huaicheng@cs.uchicago.edu>

Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-16 10:06:33 -06:00
Matias Bjørling ade69e2432 lightnvm: merge gennvm with core
For the first iteration of Open-Channel SSDs, it was anticipated that
there could be various media managers on top of an open-channel SSD,
such to allow vendors to plug in their own host-side FTLs, without the
media manager in between.

Now that an Open-Channel SSD is exposed as a traditional block device,
there is no longer a need for this. Therefore lets merge the gennvm code
with core and simplify the stack.

Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2017-01-31 08:32:13 -07:00
Geert Uytterhoeven e105ddb4a2 lightnvm: NVM should depend on HAS_DMA
If NO_DMA=y:

    drivers/built-in.o: In function `nvme_nvm_dev_dma_free':
    lightnvm.c:(.text+0x23df1a): undefined reference to `dma_pool_free'
    drivers/built-in.o: In function `nvme_nvm_dev_dma_alloc':
    lightnvm.c:(.text+0x23df38): undefined reference to `dma_pool_alloc'
    drivers/built-in.o: In function `nvme_nvm_destroy_dma_pool':
    lightnvm.c:(.text+0x23df4c): undefined reference to `dma_pool_destroy'
    drivers/built-in.o: In function `nvme_nvm_create_dma_pool':
    lightnvm.c:(.text+0x23df7e): undefined reference to `dma_pool_create'

and

    ERROR: "dma_pool_destroy" [drivers/nvme/host/nvme-core.ko] undefined!
    ERROR: "dma_pool_free" [drivers/nvme/host/nvme-core.ko] undefined!
    ERROR: "dma_pool_alloc" [drivers/nvme/host/nvme-core.ko] undefined!
    ERROR: "dma_pool_create" [drivers/nvme/host/nvme-core.ko] undefined!

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-09-21 07:56:10 -06:00
Matias Bjørling 5e60edb7dc lightnvm: rename gennvm and update description
The generic manager should be called the general media manager, and
instead of using the rather long name of "gennvm" in front of each data
structures, use "gen" instead to shorten it. Update the description of
the media manager as well to make the media manager purpose clearer.

Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-07 08:51:52 -06:00
Matias Bjørling 4158624454 lightnvm: do not compile in debugging by default
The LightNVM module exposes a debug interface when CONFIG_NVM_DEBUG is
set. This interfaces takes a string to configure media managers and
targets. Make sure this interface is only exposed when chosen
deliberately.

Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-07 09:14:20 -07:00
Matias Bjørling ae1519ec44 rrpc: Round-robin sector target with cost-based gc
This target allows an Open-Channel SSD to be exposed asas a block
device.

It implements a round-robin approach for sector allocation,
together with a greedy cost-based garbage collector.

Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-29 16:21:42 +09:00
Matias Bjørling 48add0f5a6 gennvm: Generic NVM manager
The implementation for Open-Channel SSDs is divided into media
management and targets. This patch implements a generic media manager
for open-channel SSDs. After a media manager has been initialized,
single or multiple targets can be instantiated with the media managed as
the backend.

Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-29 16:21:42 +09:00
Matias Bjørling cd9e9808d1 lightnvm: Support for Open-Channel SSDs
Open-channel SSDs are devices that share responsibilities with the host
in order to implement and maintain features that typical SSDs keep
strictly in firmware. These include (i) the Flash Translation Layer
(FTL), (ii) bad block management, and (iii) hardware units such as the
flash controller, the interface controller, and large amounts of flash
chips. In this way, Open-channels SSDs exposes direct access to their
physical flash storage, while keeping a subset of the internal features
of SSDs.

LightNVM is a specification that gives support to Open-channel SSDs
LightNVM allows the host to manage data placement, garbage collection,
and parallelism. Device specific responsibilities such as bad block
management, FTL extensions to support atomic IOs, or metadata
persistence are still handled by the device.

The implementation of LightNVM consists of two parts: core and
(multiple) targets. The core implements functionality shared across
targets. This is initialization, teardown and statistics. The targets
implement the interface that exposes physical flash to user-space
applications. Examples of such targets include key-value store,
object-store, as well as traditional block devices, which can be
application-specific.

Contributions in this patch from:

  Javier Gonzalez <jg@lightnvm.io>
  Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
  Jesper Madsen <jmad@itu.dk>

Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-29 16:21:42 +09:00