Commit Graph

362 Commits

Author SHA1 Message Date
Linus Torvalds d895cb1af1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile (part one) from Al Viro:
 "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
  locking violations, etc.

  The most visible changes here are death of FS_REVAL_DOT (replaced with
  "has ->d_weak_revalidate()") and a new helper getting from struct file
  to inode.  Some bits of preparation to xattr method interface changes.

  Misc patches by various people sent this cycle *and* ocfs2 fixes from
  several cycles ago that should've been upstream right then.

  PS: the next vfs pile will be xattr stuff."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
  saner proc_get_inode() calling conventions
  proc: avoid extra pde_put() in proc_fill_super()
  fs: change return values from -EACCES to -EPERM
  fs/exec.c: make bprm_mm_init() static
  ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
  ocfs2: fix possible use-after-free with AIO
  ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
  get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
  target: writev() on single-element vector is pointless
  export kernel_write(), convert open-coded instances
  fs: encode_fh: return FILEID_INVALID if invalid fid_type
  kill f_vfsmnt
  vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
  nfsd: handle vfs_getattr errors in acl protocol
  switch vfs_getattr() to struct path
  default SET_PERSONALITY() in linux/elf.h
  ceph: prepopulate inodes only when request is aborted
  d_hash_and_lookup(): export, switch open-coded instances
  9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
  9p: split dropping the acls from v9fs_set_create_acl()
  ...
2013-02-26 20:16:07 -08:00
Al Viro 496ad9aa8e new helper: file_inode(file)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22 23:31:31 -05:00
Yasuaki Ishimatsu cfc57557f2 PNPACPI: Fix acpi_bus_get_device() check in drivers/pnp/pnpacpi/core.c
acpi_bus_get_device() returns int not acpi_status.

The patch change not to apply ACPI_FAILURE() to the return value of
acpi_bus_get_device().

Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-31 21:11:08 +01:00
Kees Cook 35de87deee drivers/pnp/pnpbios: remove depends on CONFIG_EXPERIMENTAL
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.

Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-26 00:33:09 +01:00
Witold Szczeponik 13cde3b2a6 PNP: Handle IORESOURCE_BITS in resource allocation
The patch copies the flags masked by IORESOURCE_BITS from a resource's
template.  This is necessary because the resource settings require proper
IORESOURCE_BITS which are not known during the definition of these resources
using the "/sys/bus/pnp/*/*/resources" interface.  (In fact, they should not
be set by the user as the resource templates define the proper settings.)

If the patch is not applied, the resource flags are not initialized properly
and obscure messages in the kernel log have been seen ("invalid flags").

Signed-off-by: Witold Szczeponik <Witold.Szczeponik@gmx.net>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-03 13:10:53 +01:00
Witold Szczeponik c9377667e6 PNP: Simplify setting of resources
This patch factors out the setting of PNP resources into one function which is
then reused for all PNP resource types.  This makes the code more concise and
avoids duplication.  The parameters "type" and "flags" are not used at the
moment but may be used by follow-up patches.  Placeholders for these patches
can be found in the comment lines that contain the "TBD" marker.

As the code does not make any changes to the ABI, no regressions are expected.

NB: While at it, support for bus type resources is added.

Signed-off-by: Witold Szczeponik <Witold.Szczeponik@gmx.net>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-03 13:10:52 +01:00
Linus Torvalds cff2f741b8 Driver core updates for 3.8-rc1
Here's the large driver core updates for 3.8-rc1.
 
 The biggest thing here is the various __dev* marking removals.  This is
 going to be a pain for the merge with different subsystem trees, I know,
 but all of the patches included here have been ACKed by their various
 subsystem maintainers, as they wanted them to go through here.
 
 If this is too much of a pain, I can pull all of them out of this tree
 and just send you one with the other fixes/updates and then, after
 3.8-rc1 is out, do the rest of the removals to ensure we catch them all,
 it's up to you.  The merges should all be trivial, and Stephen has been
 doing them all in linux-next for a few weeks now quite easily.
 
 Other than the __dev* marking removals, there's nothing major here, some
 firmware loading updates and other minor things in the driver core.
 
 All of these have (much to Stephen's annoyance), been in linux-next for
 a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlDHkPkACgkQMUfUDdst+ykaWgCfW7AM30cv0nzoVO08ax6KjlG1
 KVYAn3z/KYazvp4B6LMvrW9y0G34Wmad
 =yvVr
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg Kroah-Hartman:
 "Here's the large driver core updates for 3.8-rc1.

  The biggest thing here is the various __dev* marking removals.  This
  is going to be a pain for the merge with different subsystem trees, I
  know, but all of the patches included here have been ACKed by their
  various subsystem maintainers, as they wanted them to go through here.

  If this is too much of a pain, I can pull all of them out of this tree
  and just send you one with the other fixes/updates and then, after
  3.8-rc1 is out, do the rest of the removals to ensure we catch them
  all, it's up to you.  The merges should all be trivial, and Stephen
  has been doing them all in linux-next for a few weeks now quite
  easily.

  Other than the __dev* marking removals, there's nothing major here,
  some firmware loading updates and other minor things in the driver
  core.

  All of these have (much to Stephen's annoyance), been in linux-next
  for a while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fixed up trivial conflicts in drivers/gpio/gpio-{em,stmpe}.c due to gpio
update.

* tag 'driver-core-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (93 commits)
  modpost.c: Stop checking __dev* section mismatches
  init.h: Remove __dev* sections from the kernel
  acpi: remove use of __devinit
  PCI: Remove __dev* markings
  PCI: Always build setup-bus when PCI is enabled
  PCI: Move pci_uevent into pci-driver.c
  PCI: Remove CONFIG_HOTPLUG ifdefs
  unicore32/PCI: Remove CONFIG_HOTPLUG ifdefs
  sh/PCI: Remove CONFIG_HOTPLUG ifdefs
  powerpc/PCI: Remove CONFIG_HOTPLUG ifdefs
  mips/PCI: Remove CONFIG_HOTPLUG ifdefs
  microblaze/PCI: Remove CONFIG_HOTPLUG ifdefs
  dma: remove use of __devinit
  dma: remove use of __devexit_p
  firewire: remove use of __devinitdata
  firewire: remove use of __devinit
  leds: remove use of __devexit
  leds: remove use of __devinit
  leds: remove use of __devexit_p
  mmc: remove use of __devexit
  ...
2012-12-11 13:13:55 -08:00
Rafael J. Wysocki 1a14f30b36 Merge branch 'acpi-general'
* acpi-general:
  pnpacpi: fix incorrect TEST_ALPHA() test
  ACPI / video: ignore BIOS initial backlight value for HP Folio 13-2000
  ACPI : do not use Lid and Sleep button for S5 wakeup
2012-12-07 23:14:35 +01:00
Alan Cox cdc87c5a30 pnpacpi: fix incorrect TEST_ALPHA() test
TEST_ALPHA() is broken and always returns 0.

[akpm@linux-foundation.org: return false for '@' as well, per Bjorn]
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-12-07 23:11:14 +01:00
Rafael J. Wysocki 6b728f1a90 Merge branch 'acpi-general'
* acpi-general:
  ACPI / PNP: Do not crash due to stale pointer use during system resume
  ACPI / video: Add "Asus UL30VT" to ACPI video detect blacklist
  ACPI: do acpisleep dmi check when CONFIG_ACPI_SLEEP is set
2012-12-04 13:46:08 +01:00
Rafael J. Wysocki a6b5e88c0e ACPI / PNP: Do not crash due to stale pointer use during system resume
During resume from system suspend the 'data' field of
struct pnp_dev in pnpacpi_set_resources() may be a stale pointer,
due to removal of the associated ACPI device node object in the
previous suspend-resume cycle.  This happens, for example, if a
dockable machine is booted in the docking station and then suspended
and resumed and suspended again.  If that happens,
pnpacpi_build_resource_template() called from pnpacpi_set_resources()
attempts to use that pointer and crashes.

However, pnpacpi_set_resources() actually checks the device's ACPI
handle, attempts to find the ACPI device node object attached to it
and returns an error code if that fails, so in fact it knows what the
correct value of dev->data should be.  Use this observation to update
dev->data with the correct value if necessary and dump a call trace
if that's the case (once).

We still need to fix the root cause of this issue, but preventing
systems from crashing because of it is an improvement too.

Reported-and-tested-by: Zdenek Kabelac <zdenek.kabelac@gmail.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=51071
Cc: <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-30 13:05:05 +01:00
Bill Pemberton 38de2790c7 pnpbios: remove CONFIG_HOTPLUG ifdefs
Remove conditional code based on CONFIG_HOTPLUG being false.  It's
always on now in preparation of it going away as an option.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Adam Belay <abelay@mit.edu>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28 10:33:03 -08:00
Adrian Hunter 2905875344 ACPI / PNP: skip ACPI device nodes associated with physical nodes already
Make pnpacpi_add_device() ignore ACPI device nodes already associated
with struct device objects representing physical devices.

In particular, this will prevent PNP device objects from being
created for ACPI device nodes already associated with platform
devices.

This change was originally proposed by Mika Westerberg.

[rjw: Modified the subject and changelog.]
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-23 21:07:12 +01:00
Rafael J. Wysocki 046d9ce682 ACPI: Move device resources interpretation code from PNP to ACPI core
Move some code used for parsing ACPI device resources from the PNP
subsystem to the ACPI core, so that other bus types (platform, SPI,
I2C) can use the same routines for parsing resources in a consistent
way, without duplicating code.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2012-11-15 00:30:01 +01:00
Lan Tianyu 1033f9041d ACPI: Allow ACPI binding with USB-3.0 hub
A USB port's position and connectability can't be identified on some boards
via USB hub registers. ACPI _UPC and _PLD can help to resolve this issue
and so it is necessary to bind USB with ACPI. This patch is to allow ACPI
binding with USB-3.0 hub.

Current ACPI only can bind one struct-device to one ACPI device node.
This can not work with USB-3.0 hub, because the USB-3.0 hub has two logical
devices. Each works for USB-2.0 and USB-3.0 devices. In the Linux USB subsystem,
those two logical hubs are treated as two seperate devices that have two struct
devices. But in the ACPI DSDT, these two logical hubs share one ACPI device
node. So there is a requirement to bind multi struct-devices to one ACPI
device node. This patch is to resolve such problem.

Following is the ACPI device nodes' description under xhci hcd.

Device (XHC)
            Device (RHUB)
                Device (HSP1)
                Device (HSP2)
                Device (HSP3)
                Device (HSP4)
                Device (SSP1)
                Device (SSP2)
                Device (SSP3)
                Device (SSP4)

Topology in the Linux

	device XHC
	   USB-2.0 logical hub    USB-3.0 logical hub
		HSP1			SSP1
		HSP2			SSP2
		HSP3			SSP3
		HSP4			SSP4

This patch also modifies the output of /proc/acpi/wakeup. One ACPI node
can be associated with multiple devices:

XHC		S4	*enabled	pci:0000:00:14.0
RHUB	S0	disabled	usb:usb1
			disabled	usb:usb2

Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-21 13:30:29 -04:00
Huang Ying ee85f54371 ACPI/PM: specify lowest allowed state for device sleep state
Lower device sleep state can save more power, but has more exit
latency too.  Sometimes, to satisfy some power QoS and other
requirement, we need to constrain the lowest device sleep state.

In this patch, a parameter to specify lowest allowed state for
acpi_pm_device_sleep_state is added.  So that the caller can enforce
the constraint via the parameter.

This is needed by PCIe D3cold support, where the lowest power state
allowed may be D3_HOT instead of default D3_COLD.

CC: Len Brown <lenb@kernel.org>
CC: linux-acpi@vger.kernel.org
Reviewed-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-23 10:41:09 -06:00
Linus Torvalds a335750b9a Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull ACPI & Power Management changes from Len Brown:
 - ACPI 5.0 after-ripples, ACPICA/Linux divergence cleanup
 - cpuidle evolving, more ARM use
 - thermal sub-system evolving, ditto
 - assorted other PM bits

Fix up conflicts in various cpuidle implementations due to ARM cpuidle
cleanups (ARM at91 self-refresh and cpu idle code rewritten into
"standby" in asm conflicting with the consolidation of cpuidle time
keeping), trivial SH include file context conflict and RCU tracing fixes
in generic code.

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (77 commits)
  ACPI throttling: fix endian bug in acpi_read_throttling_status()
  Disable MCP limit exceeded messages from Intel IPS driver
  ACPI video: Don't start video device until its associated input device has been allocated
  ACPI video: Harden video bus adding.
  ACPI: Add support for exposing BGRT data
  ACPI: export acpi_kobj
  ACPI: Fix logic for removing mappings in 'acpi_unmap'
  CPER failed to handle generic error records with multiple sections
  ACPI: Clean redundant codes in scan.c
  ACPI: Fix unprotected smp_processor_id() in acpi_processor_cst_has_changed()
  ACPI: consistently use should_use_kmap()
  PNPACPI: Fix device ref leaking in acpi_pnp_match
  ACPI: Fix use-after-free in acpi_map_lsapic
  ACPI: processor_driver: add missing kfree
  ACPI, APEI: Fix incorrect APEI register bit width check and usage
  Update documentation for parameter *notrigger* in einj.txt
  ACPI, APEI, EINJ, new parameter to control trigger action
  ACPI, APEI, EINJ, limit the range of einj_param
  ACPI, APEI, Fix ERST header length check
  cpuidle: power_usage should be declared signed integer
  ...
2012-03-30 16:45:39 -07:00
Yinghai Lu 89e96ada57 PNPACPI: Fix device ref leaking in acpi_pnp_match
During testing pci root bus removal, found some root bus bridge is not freed.
If booting with pnpacpi=off, those hostbridge could be freed without problem.
It turns out that some devices reference are not released during acpi_pnp_match.
that match should not hold one device ref during every calling.
Add pu_device calling before returning.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 03:38:40 -04:00
David Howells 9ffc93f203 Remove all #inclusions of asm/system.h
Remove all #inclusions of asm/system.h preparatory to splitting and killing
it.  Performed with the following command:

perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *`

Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-28 18:30:03 +01:00
Bjorn Helgaas eb31aae8cb PNP: work around Dell 1536/1546 BIOS MMCONFIG bug that breaks USB
Some Dell BIOSes have MCFG tables that don't report the entire
MMCONFIG area claimed by the chipset.  If we move PCI devices into
that claimed-but-unreported area, they don't work.

This quirk reads the AMD MMCONFIG MSRs and adds PNP0C01 resources as
needed to cover the entire area.

Example problem scenario:

  BIOS-e820: 00000000cfec5400 - 00000000d4000000 (reserved)
  Fam 10h mmconf [d0000000, dfffffff]
  PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xd0000000-0xd3ffffff] (base 0xd0000000)
  pnp 00:0c: [mem 0xd0000000-0xd3ffffff]
  pci 0000:00:12.0: reg 10: [mem 0xffb00000-0xffb00fff]
  pci 0000:00:12.0: no compatible bridge window for [mem 0xffb00000-0xffb00fff]
  pci 0000:00:12.0: BAR 0: assigned [mem 0xd4000000-0xd40000ff]

Reported-by: Lisa Salimbas <lisa.salimbas@canonical.com>
Reported-by: <thuban@singularity.fr>
Tested-by: dann frazier <dann.frazier@canonical.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=31602
References: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/647043
References: https://bugzilla.redhat.com/show_bug.cgi?id=770308
Cc: stable@kernel.org	# 2.6.34+
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-06 12:11:20 -08:00
Linus Torvalds 3c00303206 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  cpuidle: Single/Global registration of idle states
  cpuidle: Split cpuidle_state structure and move per-cpu statistics fields
  cpuidle: Remove CPUIDLE_FLAG_IGNORE and dev->prepare()
  cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state
  ACPI: Fix CONFIG_ACPI_DOCK=n compiler warning
  ACPI: Export FADT pm_profile integer value to userspace
  thermal: Prevent polling from happening during system suspend
  ACPI: Drop ACPI_NO_HARDWARE_INIT
  ACPI atomicio: Convert width in bits to bytes in __acpi_ioremap_fast()
  PNPACPI: Simplify disabled resource registration
  ACPI: Fix possible recursive locking in hwregs.c
  ACPI: use kstrdup()
  mrst pmu: update comment
  tools/power turbostat: less verbose debugging
2011-11-07 10:13:52 -08:00
Witold Szczeponik 18fd470a48 PNPACPI: Simplify disabled resource registration
The attached patch simplifies 29df8d8f87.  As
the "pnp_xxx" structs are not designed to cope with IORESOURCE_DISABLED, and
hence no code can test for this value, setting this value is actually a "no op"
and can be skipped altogether.  It is sufficient to remove the checks for
"empty" resources and continue processing.

The patch is applied against 3.1.

Signed-off-by: Witold Szczeponik <Witold.Szczeponik@gmx.net>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-11-06 20:13:55 -05:00
Paul Gortmaker 26e6e9e54c pnp: Add export.h for EXPORT_SYMBOL/THIS_MODULE as required
These macros are no longer in module.h and module.h is no longer
present everywhere.  Call out export.h for the users who are
making use of these macros.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:32:21 -04:00
Linus Torvalds 45b583b10a Merge 'akpm' patch series
* Merge akpm patch series: (122 commits)
  drivers/connector/cn_proc.c: remove unused local
  Documentation/SubmitChecklist: add RCU debug config options
  reiserfs: use hweight_long()
  reiserfs: use proper little-endian bitops
  pnpacpi: register disabled resources
  drivers/rtc/rtc-tegra.c: properly initialize spinlock
  drivers/rtc/rtc-twl.c: check return value of twl_rtc_write_u8() in twl_rtc_set_time()
  drivers/rtc: add support for Qualcomm PMIC8xxx RTC
  drivers/rtc/rtc-s3c.c: support clock gating
  drivers/rtc/rtc-mpc5121.c: add support for RTC on MPC5200
  init: skip calibration delay if previously done
  misc/eeprom: add eeprom access driver for digsy_mtc board
  misc/eeprom: add driver for microwire 93xx46 EEPROMs
  checkpatch.pl: update $logFunctions
  checkpatch: make utf-8 test --strict
  checkpatch.pl: add ability to ignore various messages
  checkpatch: add a "prefer __aligned" check
  checkpatch: validate signature styles and To: and Cc: lines
  checkpatch: add __rcu as a sparse modifier
  checkpatch: suggest using min_t or max_t
  ...

Did this as a merge because of (trivial) conflicts in
 - Documentation/feature-removal-schedule.txt
 - arch/xtensa/include/asm/uaccess.h
that were just easier to fix up in the merge than in the patch series.
2011-07-25 21:00:19 -07:00
Witold Szczeponik 29df8d8f87 pnpacpi: register disabled resources
When parsing PnP ACPI resource structures, it may happen that some of
the resources are disabled (in which case "the size" of the resource
equals zero).

The current solution is to skip these resources completely - with the
unfortunate side effect that they are not registered despite the fact
that they exist, after all.  (The downside of this approach is that
these resources cannot be used as templates for setting the actual
device's resources because they are missing from the template.) The
kernel's APM implementation does not suffer from this problem and
registers all resources regardless of "their size".

This patch fixes a problem with (at least) the vintage IBM ThinkPad 600E
(and most likely also with the 600, 600X, and 770X which have a very
similar layout) where some of its PnP devices support options where
either an IRQ, a DMA, or an IO port is disabled.  Without this patch,
the devices can not be configured using the
"/sys/bus/pnp/devices/*/resources" interface.

The manipulation of these resources is important because the 600E has
very demanding requirements.  For instance, the number of IRQs is not
sufficient to support all devices of the 600E.  Fortunately, some of the
devices, like the sound card's MPU-401 UART, can be configured to not
use any IRQ, hence freeing an IRQ for a device that requires one.
(Still, the device's "ResourceTemplate" requires an IRQ resource
descriptor which cannot be created if the resource has not been
registered in the first place.)

As an example, the dependent sets of the 600E's CSC0103 device (the
MPU-401 UART) are listed, with the patch applied, as:

  Dependent: 00 - Priority preferred
    port 0x300-0x330, align 0xf, size 0x4, 16-bit address decoding
    irq <none> High-Edge
  Dependent: 01 - Priority acceptable
    port 0x300-0x330, align 0xf, size 0x4, 16-bit address decoding
    irq 5,7,2/9,10,11,15 High-Edge

(The same result is obtained when PNPBIOS is used instead of PnP ACPI.)
Without the patch, the IRQ resource in the preferred option is not
listed at all:

  Dependent: 00 - Priority preferred
    port 0x300-0x330, align 0xf, size 0x4, 16-bit address decoding
  Dependent: 01 - Priority acceptable
    port 0x300-0x330, align 0xf, size 0x4, 16-bit address decoding
    irq 5,7,2/9,10,11,15 High-Edge

And in fact, the 600E's DSDT lists the disabled IRQ as an option, as can
be seen from the following excerpt from the DSDT:

	Name (_PRS, ResourceTemplate ()
	{
        StartDependentFn (0x00, 0x00)
        {
            IO (Decode16, 0x0300, 0x0330, 0x10, 0x04)
            IRQNoFlags () {}
        }
        StartDependentFn (0x01, 0x00)
        {
            IO (Decode16, 0x0300, 0x0330, 0x10, 0x04)
            IRQNoFlags () {5,7,9,10,11,15}
        }
        EndDependentFn ()
	})

With this patch applied, a user space program - or maybe even the kernel
- can allocate all devices' resources optimally.  For the 600E, this
means to find optimal resources for (at least) the serial port, the
parallel port, the infrared port, the MWAVE modem, the sound card, and
the MPU-401 UART.

The patch applies the idea to register disabled resources to all types
of resources, not just to IRQs, DMAs, and IO ports.  At the same time,
it mimics the behavior of the "pnp_assign_xxx" functions from
"drivers/pnp/manager.c" where resources with "no size" are considered
disabled.

No regressions were observed on hardware that does not require this
patch.

The patch is applied against 2.6.39.

NB: The kernel's current PnP interface does not allow for disabling individual
resources using the "/sys/bus/pnp/devices/$device/resources" file.  Assuming
this could be done, a device could be configured to use a disabled resource
using a simple series of calls:

  echo disable > /sys/bus/pnp/devices/$device/resources
  echo clear > /sys/bus/pnp/devices/$device/resources
  echo set irq disabled > /sys/bus/pnp/devices/$device/resources
  echo fill > /sys/bus/pnp/devices/$device/resources
  echo activate > /sys/bus/pnp/devices/$device/resources

This patch addresses only the parsing of PnP ACPI devices.

ChangeLog (v1 -> v2):
 - extend patch description
 - fix typo in patch itself

Signed-off-by: Witold Szczeponik <Witold.Szczeponik@gmx.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Adam Belay <abelay@mit.edu>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:17 -07:00
Joe Perches 28f65c11f2 treewide: Convert uses of struct resource to resource_size(ptr)
Several fixes as well where the +1 was missing.

Done via coccinelle scripts like:

@@
struct resource *ptr;
@@

- ptr->end - ptr->start + 1
+ resource_size(ptr)

and some grep and typing.

Mostly uncompiled, no cross-compilers.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-10 14:55:36 +02:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
David Rientjes 586f83e2b4 pnp: only assign IORESOURCE_DMA if CONFIG_ISA_DMA_API is enabled
IORESOURCE_DMA cannot be assigned without utilizing the interface
provided by CONFIG_ISA_DMA_API, specifically request_dma() and
free_dma().  Thus, there's a strict dependency on the config option and
limits IORESOURCE_DMA only to architectures that support ISA-style DMA.

ia64 is not one of those architectures, so pnp_check_dma() no longer
needs to be special-cased for that architecture.

pnp_assign_resources() will now return -EINVAL if IORESOURCE_DMA is
attempted on such a kernel.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:16 -07:00
Len Brown 6d1f23f204 Merge branch 'pnp' into release 2011-01-12 04:59:44 -05:00
Rafael J. Wysocki cc8e7a355c PNP / ACPI: Use DEVICE_ACPI_HANDLE() for device ACPI handle access
The PNP ACPI driver squirrels the ACPI handles of PNP devices' ACPI
companions, but this isn't correct, because those handles should be
accessed using the DEVICE_ACPI_HANDLE() macro operating on struct
device objects.

Using DEVICE_ACPI_HANDLE() in the PNP ACPI driver instead of the
driver's own copies of the ACPI handles allows us to avoid a problem
with docking stations where a machine docked before suspend to RAM
and undocked while suspended crashes during the subsequent resume (in
that case the ACPI companion of the PNP device in question doesn't
exist any more while the device is being resumed).  It also allows us
to avoid the problem where suspend to RAM fails when the machine was
undocked while suspended before (again, the ACPI companion of the PNP
device is not present any more while it is being suspended).

This change doesn't fix all of the the PNP ACPI driver's problems
with PNP devices in docking stations (generally speaking, the driver
has no idea that devices can come and go and doesn't even attempt to
handle such events), but at least it makes suspend work for the
users of docking stations who don't use the PNP devices located in
there.

References: https://bugzilla.kernel.org/show_bug.cgi?id=15100

Reported-and-tested-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-01-11 15:20:40 -05:00
Jan Beulich 66c3ec4f1f ACPI/PNP: avoid section mismatch warning
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-12-11 02:01:47 -05:00
Arnd Bergmann 451a3c24b0 BKL: remove extraneous #include <smp_lock.h>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-17 08:59:32 -08:00
Thomas Renninger cdefba03e4 PNP: Set up pnp_debug via module and not via boot param.
Cleanup only, no functional change (pnp.debug can be enabled
and disabled at runtime, but that's not a real enhancement).

This one depends on another PNP cleanup patch:
PNP: Compile all pnp built-in stuff in one module namespace

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-27 02:23:59 -04:00
Thomas Renninger 803711afdb PNP: Compile all pnp built-in stuff in one module namespace
This is cleanup mostly, nothing urgent.
I came up with it when looking at dynamic debug which can
enable pr_debug messages at runtime or boot param
for a specific module.

Advantages:
  - Any pnp code can make use of the moduleparam.h interface, the modules
    will show up as pnp.param.
  - Passing pnp.ddebug as kernel boot param will enable all pnp debug messages
    with my previous patch and CONFIG_DYNAMIC_DEBUG enabled.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-27 02:23:44 -04:00
Linus Torvalds 474829e875 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (53 commits)
  ACPI: install ACPI table handler before any dynamic tables being loaded
  ACPI / PM: Blacklist another machine that needs acpi_sleep=nonvs
  ACPI: Page based coalescing of I/O remappings optimization
  ACPI: Convert simple locking to RCU based locking
  ACPI: Pre-map 'system event' related register blocks
  ACPI: Add interfaces for ioremapping/iounmapping ACPI registers
  ACPI: Maintain a list of ACPI memory mapped I/O remappings
  ACPI: Fix ioremap size for MMIO reads and writes
  ACPI / Battery: Return -ENODEV for unknown values in get_property()
  ACPI / PM: Fix reference counting of power resources
  Subject: [PATCH] ACPICA: Fix Scope() op in module level code
  ACPI battery: support percentage battery remaining capacity
  ACPI: Make Embedded Controller command timeout delay configurable
  ACPI dock: move some functions to .init.text
  ACPI: thermal: remove unused limit code
  ACPI: static sleep_states[] and acpi_gts_bfs_check
  ACPI: remove dead code
  ACPI: delete dedicated MAINTAINERS entries for ACPI EC and BATTERY drivers
  ACPI: Only processor needs CPU_IDLE
  ACPICA: Update version to 20101013
  ...
2010-10-26 17:28:37 -07:00
Len Brown 8c654bb808 Merge branch 'pnp-log' into release 2010-10-25 02:13:48 -04:00
Len Brown b10b977b79 Merge branch 'pnpacpi-invalid-device-id' into release 2010-10-25 02:13:44 -04:00
Linus Torvalds 229aebb873 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  Update broken web addresses in arch directory.
  Update broken web addresses in the kernel.
  Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget
  Revert "Fix typo: configuation => configuration" partially
  ida: document IDA_BITMAP_LONGS calculation
  ext2: fix a typo on comment in ext2/inode.c
  drivers/scsi: Remove unnecessary casts of private_data
  drivers/s390: Remove unnecessary casts of private_data
  net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data
  drivers/infiniband: Remove unnecessary casts of private_data
  drivers/gpu/drm: Remove unnecessary casts of private_data
  kernel/pm_qos_params.c: Remove unnecessary casts of private_data
  fs/ecryptfs: Remove unnecessary casts of private_data
  fs/seq_file.c: Remove unnecessary casts of private_data
  arm: uengine.c: remove C99 comments
  arm: scoop.c: remove C99 comments
  Fix typo configue => configure in comments
  Fix typo: configuation => configuration
  Fix typo interrest[ing|ed] => interest[ing|ed]
  Fix various typos of valid in comments
  ...

Fix up trivial conflicts in:
	drivers/char/ipmi/ipmi_si_intf.c
	drivers/usb/gadget/rndis.c
	net/irda/irnet/irnet_ppp.c
2010-10-24 13:41:39 -07:00
Justin P. Mattock 631dd1a885 Update broken web addresses in the kernel.
The patch below updates broken web addresses in the kernel

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Finn Thain <fthain@telegraphics.com.au>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Dimitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Mike Frysinger <vapier.adi@gmail.com>
Acked-by: Ben Pfaff <blp@cs.stanford.edu>
Acked-by: Hans J. Koch <hjk@linutronix.de>
Reviewed-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-18 11:03:14 +02:00
Thomas Renninger 620e112cfe ACPI/PNP: A HID value of an object never changes -> make it const
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-01 19:28:51 -04:00
Dmitry Torokhov 420a0f6637 PNPACPI: cope with invalid device IDs
If primary ID (HID) is invalid try locating first valid ID on compatible
ID list before giving up.

This helps, for example, to recognize i8042 AUX port on Sony Vaio VPCZ1
which uses SNYSYN0003 as HID. Without the patch users are forced to
boot with i8042.nopnp to make use of their touchpads.

Tested-by: Jan-Hendrik Zab <jan@jhz.name>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-01 02:08:59 -04:00
Bjorn Helgaas c1f3f28196 PNP: log PNP resources, as we do for PCI
ACPI devices are often involved in address space conflicts with PCI devices,
so I think it's worth logging the resources they use.  Otherwise we have to
depend on lspnp or groping around in sysfs to find them.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-10-01 01:59:34 -04:00
Arnd Bergmann 6117d2130c isapnp: BKL removal
Remove BKL use from isapnp_proc_bus_lseek(), like was done for
proc_bus_pci_lseek() a long time ago and recently for Zorro
by Geert Uytterhoeven.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jaroslav Kysela <perex@perex.cz>
2010-09-26 16:25:52 +02:00
Alan Stern b14e033e17 PNPACPI: Add support for remote wakeup
This patch (as1354) adds remote-wakeup support to the pnpacpi driver.
The new can_wakeup method also allows other PNP protocol drivers
(pnpbios or iaspnp) to add wakeup support, but I don't know enough
about how they work to actually do it.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-07-19 01:58:48 +02:00
Len Brown 1468cf0542 Merge branches 'bugzilla-14337', 'bugzilla-14998', 'bugzilla-15407', 'bugzilla-15903' and 'misc-2.6.34' into release 2010-05-06 22:04:31 -04:00
Bjorn Helgaas 11439a6fd9 PNP: don't check for conflicts with bridge windows
With fa35b4926, I broke a lot of PNP resource assignment.  That commit made
PNPACPI include bridge windows as PNP resources, and PNP resource assignment
treats any enabled overlapping PNP resources as conflicts.  Since PCI host
bridge windows typically include most of the I/O port space, this makes PNP
port assigments fail.

The PCI host bridge driver will eventually use those PNP window resources,
so we should make PNP ignore them when checking for conflicts.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=15903

Reported-and-tested-by: Pavel Kysilka <goldenfish@linuxsoft.cz>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-06 02:08:47 -04:00
Bjorn Helgaas f238b414a7 PNPACPI: compute Address Space length rather than using _LEN
ACPI _CRS Address Space Descriptors have _MIN, _MAX, and _LEN.  Linux has
been computing Address Spaces as [_MIN to _MIN + _LEN - 1].  Based on the
tests in the bug reports below, Windows apparently uses [_MIN to _MAX].

Per spec (ACPI 4.0, Table 6-40), for _CRS fixed-size, fixed location
descriptors, "_LEN must be (_MAX - _MIN + 1)", and when that's true, it
doesn't matter which way we compute the end.  But of course, there are
BIOSes that don't follow this rule, and we're better off if Linux handles
those exceptions the same way as Windows.

This patch makes Linux use [_MIN to _MAX], as Windows seems to do.  This
effectively reverts 3162b6f0c5 and replaces it with simpler code.

    https://bugzilla.kernel.org/show_bug.cgi?id=14337 (round)
    https://bugzilla.kernel.org/show_bug.cgi?id=15480 (truncate)

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-04-28 21:44:49 -04:00
Len Brown c25f7cf203 Merge branches 'battery', 'bugzilla-14667', 'bugzilla-15096', 'bugzilla-15480', 'bugzilla-15521', 'bugzilla-15605', 'gpe-reference-counters', 'misc', 'pxm-fix' and 'video-random-key' into release 2010-04-06 17:06:22 -04:00
Bjorn Helgaas 3162b6f0c5 PNPACPI: truncate _CRS windows with _LEN > _MAX - _MIN + 1
The ACPI spec (sec 6.4.3.5 in v4.0) requires that for Address Space Resource
Descriptors, _LEN <= _MAX - _MIN + 1 in all cases, but there are BIOSes that
violate this.  We experimentally determined that Windows truncates the
resource so it doesn't extend past _MAX, so let's do the same thing in
Linux.

http://bugzilla.kernel.org/show_bug.cgi?id=15480

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-04-04 01:33:43 -04:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00