Commit Graph

158 Commits

Author SHA1 Message Date
Linus Torvalds ed378a52da USB merge for 3.4-rc1
Here's the big USB merge for the 3.4-rc1 merge window.
 
 Lots of gadget driver reworks here, driver updates, xhci changes, some
 new drivers added, usb-serial core reworking to fix some bugs, and other
 various minor things.
 
 There are some patches touching arch code, but they have all been acked
 by the various arch maintainers.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAk9njL8ACgkQMUfUDdst+ylQ9wCfbBOnIT01lGOorkaE9pom0hhk
 HfMAoKq1xzCR2B+OS3UMyUQffk+Ri9Ri
 =KIQ2
 -----END PGP SIGNATURE-----

Merge tag 'usb-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB merge for 3.4-rc1 from Greg KH:
 "Here's the big USB merge for the 3.4-rc1 merge window.

  Lots of gadget driver reworks here, driver updates, xhci changes, some
  new drivers added, usb-serial core reworking to fix some bugs, and
  other various minor things.

  There are some patches touching arch code, but they have all been
  acked by the various arch maintainers."

* tag 'usb-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (302 commits)
  net: qmi_wwan: add support for ZTE MF820D
  USB: option: add ZTE MF820D
  usb: gadget: f_fs: Remove lock is held before freeing checks
  USB: option: make interface blacklist work again
  usb/ub: deprecate & schedule for removal the "Low Performance USB Block" driver
  USB: ohci-pxa27x: add clk_prepare/clk_unprepare calls
  USB: use generic platform driver on ath79
  USB: EHCI: Add a generic platform device driver
  USB: OHCI: Add a generic platform device driver
  USB: ftdi_sio: new PID: LUMEL PD12
  USB: ftdi_sio: add support for FT-X series devices
  USB: serial: mos7840: Fixed MCS7820 device attach problem
  usb: Don't make USB_ARCH_HAS_{XHCI,OHCI,EHCI} depend on USB_SUPPORT.
  usb gadget: fix a section mismatch when compiling g_ffs with CONFIG_USB_FUNCTIONFS_ETH
  USB: ohci-nxp: Remove i2c_write(), use smbus
  USB: ohci-nxp: Support for LPC32xx
  USB: ohci-nxp: Rename symbols from pnx4008 to nxp
  USB: OHCI-HCD: Rename ohci-pnx4008 to ohci-nxp
  usb: gadget: Kconfig: fix typo for 'different'
  usb: dwc3: pci: fix another failure path in dwc3_pci_probe()
  ...
2012-03-20 11:26:30 -07:00
Felipe Balbi 28f1a0d946 usb: dwc3: pci: fix another failure path in dwc3_pci_probe()
When applying commit 7d26b58 (fix failure path in
dwc3_pci_probe()), I mistakenly left out one of the
possible failures where we would return success even
on the error case.

This patch fixes that mistake.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-13 14:24:08 -07:00
Tobias Klauser b1116dcc63 usb: dwc3: core: Convert to module_platform_driver
Use the module_platform_driver macro.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-02 16:20:28 -08:00
Greg Kroah-Hartman 3d71769014 usb: dwc3: changes for v3.4 merge window
Here are the changes for v3.4 merge window.
 
 It includes a new glue layer for Samsung's Exynos platform, a simplification of
 memory management on DWC3 driver by using dev_xxx functions, a few
 optimizations to IRQ handling by dropping memcpy() and using bitshifts, a fix
 for TI's OMAP5430 TX Fifo Allocation, two fixes on USB2 test mode
 implementation (one on debugfs and one on ep0), and several minor changes such
 as whitespace cleanups, simplification of a few parts of the code, decreasing a
 long delay to something a bit saner, dropping a header which was included twice
 and so on.
 
 The highlight on this merge is the support for Samsung's Exynos platform,
 increasing the number of different users for this driver to three.
 
 Note that Samsung Exynos glue layer will only compile on platforms which
 provide implementation for the clk API for now. Once Samsung supports
 pm_runtime, that limitation can be dropped from the Makefile.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPUJ2bAAoJEIaOsuA1yqREwOgP/2bG6rvPBMlGmXvvR40HNUXJ
 jXzkXcrTBrO172Fxl2P+mAgNFggMURrOdiyXwl7+2Ib0NM7sS9jwikuxos8DwuQv
 Ci0GgJtQySORIl5Sw29uB1W65aV2ieNBh/fN/52LwVOQYITt89GYK1DsRUWRN2V/
 0bw3OepckiAFN5gWRykIYIUXZs8DQa+L1qYc6fexZk7zZ+XrjdNba8RzGzsyUelD
 BB0eOj4E2Mda6Yp7kyiBRuTXVAUChNa5J0iCvXSnR8l2wppfXlmD2UD4Sfo/yxd5
 q25/rm1e1A4iKcPjSkhzTayQKrLWEgCxZK69sZXlEPG9qhA3iMjWDNBvEy6cV4bc
 bFFjwXAObX+bm+QDYqcD66iUZTPzEW149W/e5B7+XGk09NcCs/wqoA1jEgCLEHnv
 3rsG0RvsgtMdwmBYpO8zrhJPTFa6NAq9Qc4nLj3WefXP9Vkl5gpfneIcgYKB6x0q
 LHRQsLHBWl/hXClWAPflDJaGQqEt6hjkA3IqV03yTlMNuYxDNJy931J6Cz9a9Lu5
 Gr2By/bHVcADmt8WzituQsnLvQIzLLGl0U0lKpdl24I52roqMkZVj7XaWDojLVSq
 HZnbk+c3PdEXVIDNCz1QnCY/QojEhKkeR23LP3YD8L9KxcOu8DNyL1RKdYqx3Cnv
 vrqerutPusT6kGvaRQIk
 =4Z2+
 -----END PGP SIGNATURE-----

Merge tag 'dwc3-for-v3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

usb: dwc3: changes for v3.4 merge window

Here are the changes for v3.4 merge window.

It includes a new glue layer for Samsung's Exynos platform, a simplification of
memory management on DWC3 driver by using dev_xxx functions, a few
optimizations to IRQ handling by dropping memcpy() and using bitshifts, a fix
for TI's OMAP5430 TX Fifo Allocation, two fixes on USB2 test mode
implementation (one on debugfs and one on ep0), and several minor changes such
as whitespace cleanups, simplification of a few parts of the code, decreasing a
long delay to something a bit saner, dropping a header which was included twice
and so on.

The highlight on this merge is the support for Samsung's Exynos platform,
increasing the number of different users for this driver to three.

Note that Samsung Exynos glue layer will only compile on platforms which
provide implementation for the clk API for now. Once Samsung supports
pm_runtime, that limitation can be dropped from the Makefile.

Conflicts:
	drivers/usb/dwc3/gadget.c
2012-03-02 15:56:33 -08:00
Paul Zimmerman c2df85ca31 usb: dwc3: clear 'res_trans_idx' as soon as it becomes invalid
Transfer resource index is cleared in hardware when XFERCOMPLETE
event is generated, so clear the driver's res_trans_idx variable
immediately after that event is received. The upcoming hibernation
patches depend on this change.

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-03-02 12:12:11 +02:00
Paul Zimmerman 249a456930 usb: dwc3: take lock while modifying flags
dwc3_gadget_ep_set_wedge() and dwc3_gadget_set_selfpowered() were
modifying dwc->flags/dwc->is_selfpowered without taking the lock.
Since those modifications are non-atomic, that could cause other
flags to be corrupted. Fix them both to take the lock.

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-03-02 12:12:10 +02:00
Paul Zimmerman aee63e3cb6 usb: dwc3: shorten long delay in dwc3_gadget_set_link_state()
The loop in dwc3_gadget_set_link_state() was using a udelay(500),
which is a long time to delay in interrupt context. Change it to
udelay(5) and increase the loop count to match.

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-03-02 12:12:09 +02:00
Paul Zimmerman 7d26b58735 usb: dwc3: pci: fix failure path in dwc3_pci_probe()
dwc3_pci_probe() would return success even if the calls to
dwc3_get_device_id() or platform_device_alloc() fail, fix that.

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-03-02 12:12:07 +02:00
Paul Zimmerman 3e87c42a29 usb: dwc3: replace hard-coded constant in DWC3_GCTL_SCALEDOWN(3)
Define DWC3_GCTL_SCALEDOWN_MASK and use it in place of
DWC3_GCTL_SCALEDOWN(3).

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-03-02 12:12:06 +02:00
Paul Zimmerman 9bafa56c7c usb: dwc3: fix bogus test in dwc3_gadget_start_isoc
Zero is a valid value for a microframe number. So remove the bogus
test for non-zero in dwc3_gadget_start_isoc().

Cc: stable@vger.kernel.org
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-03-02 12:12:05 +02:00
Anton Tikhomirov 27a78d6a28 usb: dwc3: use proper function for setting endpoint name
It's wrong to use the size of array as an argument for strncat.
Memory corruption is possible. strlcat is exactly what we need here.

Cc: stable@vger.kernel.org
Signed-off-by: Anton Tikhomirov <av.tikhomirov@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-03-02 12:12:04 +02:00
Paul Zimmerman 8d62cd65d7 usb: dwc3: gadget: don't wrap around the TRB poll on non-ISOC
If we have a non-ISOC endpoint, we will not have a Link TRB
pointing to the beginning of the TRB pool. On such endpoints,
we don't want to let the driver wrap around the TRB pool
otherwise controller will hang waiting for a valid TRB.

Cc: stable@vger.kernel.org
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-03-02 12:12:03 +02:00
Dan Carpenter 075cd14d2a usb: dwc3: make dwc3_get_device_id() return the id
We always return zero instead of the id we found.

Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-03-02 12:12:02 +02:00
Paul Zimmerman 1d04679395 usb: dwc3: clean up whitespace damage, typos, missing parens, etc.
trivial patch, no functional changes

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-03-02 12:12:01 +02:00
Danny Kukawka 2cd0e85121 usb: dwc3: linux/module.h included twice
drivers/usb/dwc3/core.c and drivers/usb/dwc3/dwc3-omap.c
included 'linux/module.h' twice, remove the duplicates.

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-03-02 12:12:00 +02:00
Chanho Park 802ca85067 usb: dwc3: use devm_xxx functions
This patch enables to use devm_xxx functions during probing driver.
The devm_xxx series functions are able to release resource when the
driver is detatched. We can remove several codes to release resources
in the probe function.

Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-03-02 12:11:59 +02:00
Anton Tikhomirov d28a9689c9 usb: dwc3: Add Exynos Specific Glue layer
Adds Exynos Specific Glue layer to support USB peripherals
on Samsung Exynos5 chips.

[ balbi@ti.com : prevent compilation of Exynos glue layer
	on platforms which don't provide clk API implementation ]

Signed-off-by: Anton Tikhomirov <av.tikhomirov@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-03-02 12:11:28 +02:00
Greg Kroah-Hartman f9b0f51709 This merge is rather big. Here's what it contains:
For am5536udc we have just simple coding style fixes. Nothing that has any
 potential to cause any issues going forward.
 
 With mv_udc, there's only one single change removing an unneeded NULL check.
 
 at91_udc also only saw a single change this merge window, and that's only
 removing a duplicated header.
 
 The Renesas controller has a few more involved changes. Support for SUDMAC was
 added, there's now a special handling of IRQ resources for when the IRQ line is
 shared between Renesas controller and SUDMAC, we also had a bug fix where
 Renesas controller would sleep in atomic context while doing DMA transfers from
 a tasklet. There were also a set of minor cleanups.
 
 The FSL UDC also had a scheduling in atomic context bug fix, but that's all.
 
 Thanks to Sebastian, the dummy_hcd now works better than ever with support for
 scatterlists and streams. Sebastian also added SuperSpeed descriptors to the
 serial gadgets.
 
 The highlight on this merge is the addition of a generic API for mapping and
 unmapping usb_requests. This will avoid code duplication on all UDC controllers
 and also kills all the defines for DMA_ADDR_INVALID which UDC controllers
 sprinkled around. A few of the UDC controllers were already converted to use
 this new API.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPTeaWAAoJEIaOsuA1yqREdT8QAK8ob6RqnZs9en7NdaBTq18G
 qPtdheAZ9TkWxv+JE69Nqq1DuLO93+ZqLt88kaIVp/jTg+MxZ4qeANe9Nga0Qr+U
 Qc4d9HOkKsLGC+E45TApAMCQkPZ3DxbObJRUeJI7DBefPJ+MzQYAeeQtzjEeKKf8
 hGY5kh5FdXds/TlTePwWuyVoe09grgoy7cvptIVJRZiWx8+n9PZeMiKe+vAmQDEc
 +V0FfOMZLcSY9Oi14faYDrOFIV5cjBxnwnBpinOYx5TArxep35HSynt/mJtW2a7/
 lcdpbS4Hn35LJQWcYl0onx0GNgvI/YDYg9V6vrSjoBVU7vZ/7slZ896yjiovmAsc
 KQXxKoqss80sd+rYUe/si/Ues+koN9HztucG//+9cuS2ZCnDydHMJHonMBXUZguv
 o2gzQwjRCUOcGLj+vnSAFiBAGZwAZV99rA2VgIz3dSyegDN+SverXJscOuvzzW/V
 6yERLjbmxwtIQczlUMPQgGE9gSMYKRzyDV4JlO1xtfsBwcVc0c4YE+ZnWOeEAbOa
 evrI/3RGjP12rY+eyntlN2ZpHq2ZJnS7guDjooi0mGK16LWeQh8h0zD24XoUiwnr
 nhkv+eqWJQXV2iQcyezO1TLnxhZ7LZdtfkYg5MH/VqGIuh6SNQdhew4bijUuKKsq
 +aLPREySYHdIloQjPBe/
 =RR+f
 -----END PGP SIGNATURE-----

Merge tag 'gadget-for-v3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

USB: Gadget: changes for 3.4

This merge is rather big. Here's what it contains:

For am5536udc we have just simple coding style fixes. Nothing that has any
potential to cause any issues going forward.

With mv_udc, there's only one single change removing an unneeded NULL check.

at91_udc also only saw a single change this merge window, and that's only
removing a duplicated header.

The Renesas controller has a few more involved changes. Support for SUDMAC was
added, there's now a special handling of IRQ resources for when the IRQ line is
shared between Renesas controller and SUDMAC, we also had a bug fix where
Renesas controller would sleep in atomic context while doing DMA transfers from
a tasklet. There were also a set of minor cleanups.

The FSL UDC also had a scheduling in atomic context bug fix, but that's all.

Thanks to Sebastian, the dummy_hcd now works better than ever with support for
scatterlists and streams. Sebastian also added SuperSpeed descriptors to the
serial gadgets.

The highlight on this merge is the addition of a generic API for mapping and
unmapping usb_requests. This will avoid code duplication on all UDC controllers
and also kills all the defines for DMA_ADDR_INVALID which UDC controllers
sprinkled around. A few of the UDC controllers were already converted to use
this new API.

Conflicts:
	drivers/usb/dwc3/gadget.c
2012-03-01 09:20:28 -08:00
Felipe Balbi 0fc9a1be09 usb: dwc3: gadget: use generic map/unmap routines
those routines have everything we need to map/unmap
USB requests and it's better to use them.

In order to achieve that, we had to add a simple
change on how we allocate and use our setup buffer;
we cannot allocate it from coherent anymore otherwise
the generic map/unmap routines won't be able to easily
know that the GetStatus request already has a DMA
address.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-28 14:48:54 +02:00
Ido Shayevitz f9c56cdd39 usb: gadget: Clear usb_endpoint_descriptor inside the struct usb_ep on disable
This fix a bug in f_serial, which expect the ep->desc to be NULL after
disabling an endpoint.

Cc: stable@vger.kernel.org
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-24 12:22:38 +02:00
Felipe Balbi f6bafc6a1c usb: dwc3: convert TRBs into bitshifts
this will get rid of a useless memcpy on
IRQ handling, thus improving driver performance.

Tested with OMAP5430 running g_mass_storage on
SuperSpeed and HighSpeed.

Note that we are removing the little endian access
of the TRB and all accesses will be in System endianness,
if there happens to be a system in BE, bit 12 of GSBUSCFG0
should be set so that HW does byte invariant BE accesses
when fetching TRBs.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-13 16:02:06 +02:00
Gerard Cauvy 3b637367ae usb: dwc3: ep0: fix SetFeature(TEST)
When host requests us to enter a test mode,
we cannot directly enter the test mode before
Status Phase is completed, otherwise the core
will never be able to deliver the Status ZLP
to host, because it has already entered the
requested Test Mode.

In order to fix the error, we move the actual
start of Test Mode right after we receive
Transfer Complete event of the status phase.

Signed-off-by: Gerard Cauvy <g-cauvy1@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-10 13:11:46 +02:00
Gerard Cauvy 090725431b usb: dwc3: debugfs: fix off by one when entering testmode
When implementing the USB2 testmode support via debugfs,
Felipe has committed a mistake when counting the number
of letters of some of the strings, resulting on an off
by one error which prevented some of the Test modes to
be entered properly.

This patch, fixes that mistake.

Signed-off-by: Gerard Cauvy <g-cauvy1@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-10 12:14:53 +02:00
Greg Kroah-Hartman 956563362b DWC3: use module_pci_driver
This cuts down on the boilerplate code.

Cc: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-09 08:36:06 -08:00
Felipe Balbi 2e81c36a00 usb: dwc3: gadget: allocate 3 packets for bulk and isoc endpoints
Those transfer types are generally high bandwidth, so we
want to optimize transfers with those endpoints.

For that, databook suggests allocating 3 * wMaxPacketSize
of FIFO. Let's do that.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-06 17:06:12 +02:00
Felipe Balbi d70d84423c usb: dwc3: gadget: avoid memcpy()ing event buffer
We're only using the 4 byte events and memcpy()
will make us slower. We can easily avoid that.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-06 13:40:17 +02:00
Felipe Balbi 8b5d6b0a43 usb: dwc3: host: align on host device name
PCI uses xhci-hcd, so let's use the same device
name to avoid confusion.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-06 11:48:42 +02:00
Felipe Balbi 3d4c0d4ffb usb: dwc3: debugfs: fix error check
debugfs APIs will return NULL if it fails
to create the file/directory we ask it to
create.

Instead of checking for IS_ERR(ptr) we must
check for !ptr.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-06 11:48:41 +02:00
Felipe Balbi 45b3cd4ad7 usb: dwc3: omap: convert pdata to of property
Convert our platform_data usage to OF property,
keep the legacy pdata for a while until the complete
conversion is done.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-06 11:48:39 +02:00
Felipe Balbi 8db7ed15f2 usb: dwc3: gadget: start core on Rx.Detect
When we set Run/Stop bit, we also move the
core to Rx.Detect state so that USB3 handshake
can start from a known location.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-06 11:48:36 +02:00
Felipe Balbi 457e84b662 usb: dwc3: gadget: dynamically re-size TxFifos
We need to dynamically re-size TxFifos for the
cases where default values will not do.

While at that, we create a simple function which,
for now, will just allocate one full packet fifo
space for each of the enabled endpoints.

This can be improved later in order to allow for
better throughput by allocating more space for
endpoints which could make good use of that like
isochronous and bulk.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-06 11:48:34 +02:00
Felipe Balbi bb5cfd6811 usb: dwc3: ep0: move to CONFIGURED also on delayed status
Mass Storage gadget will take some time to handle
the SetConfiguration request, but even on those
cases we should move to CONFIGURED state.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-06 11:48:31 +02:00
Felipe Balbi 7b7dd0253c usb: dwc3: gadget: use the descriptor pointer we hold
We hold that pointer for one reason. It just
looks nicer to use it.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-06 11:48:30 +02:00
Felipe Balbi 40aa41fba3 usb: dwc3: gadget: fix XferNotReady debug print
Only bit 3 of the event status bitfield is valid
and the others should not be considered.

Make sure SW matches documentation on that case
to avoid bogus debugging prints which would
confuse an engineer.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-06 11:48:28 +02:00
Felipe Balbi 138801aaa5 usb: dwc3: gadget: allow Link state changes via debugfs
This is very useful for low level link testing where
we might not have a USB Host stack, only a scope to
verify signal integrity.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-06 11:48:25 +02:00
Felipe Balbi 8598bde7fa usb: dwc3: gadget: re-factor Link state change to a function
Most link changes will, of course, happen with
the help of a matching host HW, but in some cases
we might want to debug very low level details about
the link and exposing this to debugfs sounds like
a good plan.

This is a preparation for such setup.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-06 11:48:24 +02:00
Felipe Balbi 080d921fe7 usb: dwc3: gadget: allow testmodes changes via debugfs
This is very useful for low level Link Testing where
we might not have a USB Host stack, only a scope to
verify signal integrity.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-06 11:48:22 +02:00
Felipe Balbi 04a9bfcd50 usb: dwc3: gadget: re-factor USB2 test mode to a function
There are some situations were we might need to
enable USB Test Modes without having access to a
Host stack. In such situations we cannot rely
solely on USB Control Messages to enable test
features.

For those cases, we will also allow test mode
to be enabled via debugfs and this patch is a
preparation for that.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-06 11:48:19 +02:00
Sebastian Andrzej Siewior c09d6b51d7 usb: dwc3: unmap the proper number of sg entries
num_sgs contains the number of sgs assigned by the gadget.
num_mapped_sgs contains the number of mapped sgs which may differ from
the gadget's values. For dma_unmap_sg() we have to provide the value
which was returned by dma_map_sg().

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24 15:43:17 +02:00
Felipe Balbi 1a0955fed1 usb: dwc3: ep0: fix compile warning
commit 34c60a7 (usb: dwc3: ep0: tidy up Pending
Request handling) introduced a compile warning
by leaving an unused variable.

This patch fixes that warning:

drivers/usb/dwc3/ep0.c: In function ‘__dwc3_gadget_ep0_queue’:
drivers/usb/dwc3/ep0.c:129:8: warning: unused variable ‘type’
[-Wunused-variable]

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24 15:42:25 +02:00
Felipe Balbi 68d8a78157 usb: dwc3: ep0: tidy up Pending Request handling
The way our code was written, we should never have
a DWC3_EP_PENDING_REQUEST flag set out of a Data Phase
and the code in __dwc3_gadget_ep0_queue() did not
reflect that situation properly.

Tidy up that case to avoid any possible mistakes
when starting requests for IRQs which are long
gone.

Cc: stable@vger.kernel.org
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24 15:41:22 +02:00
Linus Torvalds 55b81e6f27 Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (232 commits)
  USB: Add USB-ID for Multiplex RC serial adapter to cp210x.c
  xhci: Clean up 32-bit build warnings.
  USB: update documentation for usbmon
  usb: usb-storage doesn't support dynamic id currently, the patch disables the feature to fix an oops
  drivers/usb/class/cdc-acm.c: clear dangling pointer
  drivers/usb/dwc3/dwc3-pci.c: introduce missing kfree
  drivers/usb/host/isp1760-if.c: introduce missing kfree
  usb: option: add ZD Incorporated HSPA modem
  usb: ch9: fix up MaxStreams helper
  USB: usb-skeleton.c: cleanup open_count
  USB: usb-skeleton.c: fix open/disconnect race
  xhci: Properly handle COMP_2ND_BW_ERR
  USB: remove dead code from suspend/resume path
  USB: add quirk for another camera
  drivers: usb: wusbcore: Fix dependency for USB_WUSB
  xhci: Better debugging for critical host errors.
  xhci: Be less verbose during URB cancellation.
  xhci: Remove debugging about ring structure allocation.
  xhci: Remove debugging about toggling cycle bits.
  xhci: Remove debugging for individual transfers.
  ...
2012-01-09 12:09:47 -08:00
Greg Kroah-Hartman ff4b8a57f0 Merge branch 'driver-core-next' into Linux 3.2
This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file,
and it fixes the build error in the arch/x86/kernel/microcode_core.c
file, that the merge did not catch.

The microcode_core.c patch was provided by Stephen Rothwell
<sfr@canb.auug.org.au> who was invaluable in the merge issues involved
with the large sysdev removal process in the driver-core tree.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-06 11:42:52 -08:00
Julia Lawall 5632c827cb drivers/usb/dwc3/dwc3-pci.c: introduce missing kfree
Glue needs to be freed on exiting the function in an error case.
Furthermore, pci, which is the first argument to the probe function should
not be freed before leaveing the function, as it is reused at the call
site.  So the free of pci is changed to free glue instead.

A simplified version of the semantic match that finds the problem is as
follows: (http://coccinelle.lip6.fr)

// <smpl>
@r exists@
local idexpression x;
statement S;
identifier f1;
position p1,p2;
expression *ptr != NULL;
@@

x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
     when != if (...) { <+...x...+> }
x->f1
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04 15:52:42 -08:00
Felipe Balbi 18b7ede5f7 usb: ch9: fix up MaxStreams helper
According to USB 3.0 Specification Table 9-22, if
bmAttributes [4:0] are set to zero, it means "no
streams supported", but the way this helper was
defined on Linux, we will *always* have one stream
which might cause several problems.

For example on DWC3, we would tell the controller
endpoint has streams enabled and yet start transfers
with Stream ID set to 0, which would goof up the host
side.

While doing that, convert the macro to an inline
function due to the different checks we now need.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-04 15:52:42 -08:00
Greg Kroah-Hartman ee0db58ade Merge branch 'for-gadget/next' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
* 'for-gadget/next' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (24 commits)
  usb: dwc3: gadget: add support for SG lists
  usb: dwc3: gadget: don't force 'LST' always
  usb: dwc3: gadget: don't return anything on prepare trbs
  usb: dwc3: gadget: re-factor dwc3_prepare_trbs()
  usb: gadget: introduce support for sg lists
  usb: renesas: pipe: convert a long if into a XOR operation
  usb: gadget: remove useless depends on Kconfig
  usb: gadget: s3c-hsudc: remove the_controller global
  usb: gadget: s3c-hsudc: use release_mem_region instead of release_resource
  usb: gadget: s3c-hsudc: Add regulator handling
  usb: gadget: s3c-hsudc: use udc_start and udc_stop functions
  usb: gadget: s3c-hsudc: move device registration to probe
  usb: gadget: s3c-hsudc: add missing otg_put_transceiver in probe
  usb: gadget: s3c-hsudc: add __devinit to probe function
  usb: gadget: s3c-hsudc: move platform_data struct to global header
  USB: EHCI: Add Marvell Host Controller driver
  USB: OTG: add Marvell usb OTG driver support
  usb: gadget: mv_udc: drop ARCH dependency
  usb: gadget: mv_udc: fix bug in ep_dequeue
  usb: gadget: enlarge maxburst bit width.
  ...
2011-12-22 14:05:19 -08:00
Greg Kroah-Hartman eea9fc7ddd Merge branch 'for-next/dwc3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
* 'for-next/dwc3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb:
  usb: dwc3: gadget: move us to Default State after reset
2011-12-22 14:01:08 -08:00
Felipe Balbi eeb720fb21 usb: dwc3: gadget: add support for SG lists
add support for SG lists on dwc3 driver. With
this we can e.g. use VFS layer's SG lists on
storage gadgets so that we can start bigger
transfers and improve throughput.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-21 13:24:46 +02:00
Felipe Balbi 42f8eb7a10 usb: dwc3: gadget: don't force 'LST' always
the LST bit is to be set on the last of a series
of consecutive TRBs. We had a workaround for a
problem where data would get corrupted but that
doesn't happen anymore. It's likely that it was
caused by some FPGA instability during development
phase.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-21 13:24:46 +02:00
Felipe Balbi 68e823e24a usb: dwc3: gadget: don't return anything on prepare trbs
all that function does is setup a TRB to be sent
to HW later. There's no need to return anything
actually.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-21 13:24:45 +02:00