Commit Graph

16 Commits

Author SHA1 Message Date
FUJITA Tomonori c982c368bb [SCSI] st: fix mdata->page_order handling
dio transfer always resets mdata->page_order to zero. It breaks
high-order pages previously allocated for non-dio transfer.

This patches adds reserved_page_order to st_buffer structure to save
page order for non-dio transfer.

http://bugzilla.kernel.org/show_bug.cgi?id=14563

When enlarge_buffer() allocates 524288 from 0, st uses six-order page
allocation. So mdata->page_order is 6 and frp_seg is 2.

After that, if st uses dio, sgl_map_user_pages() sets
mdata->page_order to 0 for st_do_scsi(). After that, when we call
normalize_buffer(), it frees only free frp_seg * PAGE_SIZE (2 * 4096)
though we should free frp_seg * PAGE_SIZE << 6 (2 * 4096 << 6). So we
see buffer_size is set to 516096 (524288 - 8192).

Reported-by: Joachim Breuer <linux-kernel@jmbreuer.net>
Tested-by: Joachim Breuer <linux-kernel@jmbreuer.net>
Acked-by: Kai Makisara <kai.makisara@kolumbus.fi>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: stable@kernel.org
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-10 08:54:13 -06:00
FUJITA Tomonori edf69c58c7 [SCSI] st: remove unused frp_sg_current
frp_sg_current in struct st_buffer is always zero. We don't need it.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Kai Makisara <Kai.Makisara@kolumbus.fi>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-02 12:02:25 -06:00
FUJITA Tomonori 1ac63cf5c0 [SCSI] st: remove unused orig_frp_segs
orig_frp_segs in struct st_buffer is always zero. We don't need it.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Kai Makisara <Kai.Makisara@kolumbus.fi>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-02 12:02:01 -06:00
FUJITA Tomonori b3d59115ba [SCSI] st: remove struct scatterlist
This removes the usage of struct scatterlist completely.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Kai Makisara <Kai.Makisara@kolumbus.fi>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-02 12:01:15 -06:00
FUJITA Tomonori 08c9583242 [SCSI] st: kill struct st_buff_fragment
This removes struct st_buff_fragment and use reserved_pages array to
store fragment buffer.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Kai Makisara <Kai.Makisara@kolumbus.fi>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-02 12:00:53 -06:00
FUJITA Tomonori 6620742f72 [SCSI] st: convert dio path to use st_scsi_execute
This patch converts the dio path (mmap) to use st_scsi_execute. IOW,
it removes scsi_execute_async in the non dio path.

scsi_execute_async has gone! This also remove unused st_sleep_done.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Kai Makisara <Kai.Makisara@kolumbus.fi>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-02 11:55:36 -06:00
FUJITA Tomonori 13b53b4434 [SCSI] st: add st_scsi_execute helper function
st_scsi_execute is a helper function to perform SCSI commands
involving data transfer between user and kernel space (st_read and
st_write).

It's the future plan to combine this with st_scsi_kern_execute helper
function.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Kai Makisara <Kai.Makisara@kolumbus.fi>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-02 11:54:45 -06:00
FUJITA Tomonori d0e1ae31be [SCSI] st: add struct rq_map_data support
This adds struct rq_map_data and the array of pointers to store
fragment buffers to struct st_buffer.

This patch doesn't remove st_buf_fragment but the latter patch does.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Kai Makisara <Kai.Makisara@kolumbus.fi>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-02 11:54:23 -06:00
Kai Makisara 40f6b36c62 [SCSI] st: add option to use SILI in variable block reads
Add new option MT_ST_SILI to enable setting the SILI bit in reads in variable
block mode. If SILI is set, reading a block shorter than the byte count does
not result in CHECK CONDITION. The length of the block is determined using the
residual count from the HBA. Avoiding the REQUEST SENSE command for every
block speeds up some real applications considerably.

Signed-off-by: Kai Makisara <kai.makisara@kolumbus.fi>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:15:39 -05:00
Kai Makisara deee13dfd6 [SCSI] st: compile fix when DEBUG set to one
Remove the now useless counting of adjacent pages from the debugging code in
to make it compile when DEBUG is set non-zero.

Signed-off-by: Kai Makisara <kai.makisara@kolumbus.fi>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-22 17:21:37 -06:00
Matthias Kaehlcke 28f85009e0 [SCSI] st: Use mutex instead of semaphore
The SCSI Tape driver uses a semaphore as mutex. Use the mutex API
instead of the (binary) semaphore.

Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Acked-by: Kai Makisara <kai.makisara@kolumbus.fi>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-31 10:44:01 -05:00
Kai Makisara 9abe16c670 [SCSI] st: fix Tape dies if wrong block size used, bug 7919
On Thu, 1 Feb 2007, Andrew Morton wrote:
> On Thu, 1 Feb 2007 15:34:29 -0800
> bugme-daemon@bugzilla.kernel.org wrote:
>
> > http://bugzilla.kernel.org/show_bug.cgi?id=7919
> >
> >            Summary: Tape dies if wrong block size used
> >     Kernel Version: 2.6.20-rc5
> >             Status: NEW
> >           Severity: normal
> >              Owner: scsi_drivers-other@kernel-bugs.osdl.org
> >          Submitter: dmartin@sccd.ctc.edu
> >
> >
> > Most recent kernel where this bug did *NOT* occur: 2.6.17.14
> >
> > Other Kernels Tested and Results:
> >
> >     OK 2.6.15.7
> >     OK 2.6.16.37
> >     OK 2.6.17.14
> >     BAD 2.6.18.6
> >     BAD 2.6.18-1.2869.fc6
> >     BAD 2.6.19.2 +
> >     BAD 2.6.20-rc5
> >
> > NOTE: 2.6.18-1.2869.fc6 is a Fedora modified kernel, all others are from kernel.org
> >
...
> > Steps to reproduce:
> > Get a Adaptec AHA-2940U/UW/D / AIC-7881U card and a tape drive,
> > install a recent kernel
> > set the tape block size - mt setblk 4096
> > read from or write to tape using wrong block size - tar -b 7 -cvf /dev/tape foo
> >
Write does not trigger this bug because the driver refuses in fixed block
mode writes that are not a multiple of the block size. Read does trigger
it in my system.

The bug is not associated with any specific HBA. st tries to do direct i/o
in fixed block mode with reads that are not a multiple of tape block size.

The patch in this message fixes the st problem by switching to using the
driver buffer up to the next close of the device file in fixed block mode
if the user asks for a read like this.

I don't know why the bug has surfaced only after 2.6.17 although the st
problem is old. There may be another bug in the block subsystem and this
patch works around it. However, the patch fixes a problem in st and in
this way it is a valid fix.

This patch may also fix the bug 7900.

The patch compiles and is lightly tested.

Signed-off-by: Kai Makisara <kai.makisara@kolumbus.fi>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-03 08:05:47 -06:00
Martin Habets 332959cb52 [SCSI] st: remove unused st_buffer.in_use
I noticed that in_use in st_buffer is not used. The patch below
against 2.6.17-rc3 removes it, assuming there is no future use for it.
It was tested in a sparc SS20 with a DLT4000.

Signed-off-by: Martin Habets <errandir_news@mph.eclipse.co.uk>
Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-29 11:06:30 -04:00
Mike Christie 8b05b773b6 [SCSI] convert st to use scsi_execute_async
convert st to always send scatterlists and kill scsi_request
usage.

This is the same as last time as it was posted, but with Kai's patches
merged and we now pass the bytes value to scsi_execute_async.

TODO:

- move DIO code to common place or make block layers usable for ULDs.
- move buffer allocation code to common place for all ULDs to use. And
make buffer allocation code handle all queue limits so we can find
out about problems before calling scsi_execute_async.
- move indirect (copy_to/from_user) paths commone place or make block
layers usable for ULDs.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-14 19:16:31 -08:00
Kai Makisara f03a567054 [SCSI] drivers/scsi/st.c: add reference count and related fixes
I have rediffed the patch against 2.6.13-rc5, done a couple of cosmetic
cleanups, and run some tests.  Brian King has acknowledged that it fixes the
problems he has seen. Seems mature enough for inclusion into 2.6.14 (or
later)?

Nate's explanation of the changes:

I've attached patches against 2.6.13rc2. These are basically identical
to my earlier patches, as I found that all issues I'd seen in earlier
kernels still existed in this kernel.

To summarize, the changes are: (more details in my original email)

- add a kref to the scsi_tape structure, and associate reference
counting stuff

- set sr_request->end_io = blk_end_sync_rq so we get notified when an IO
is rejected when the device goes away

- check rq_status when IOs complete, else we don't know that IOs
rejected for a dead device in fact did not complete

- change last_SRpnt so it's set before an async IO is issued (in case
st_sleep_done is bypassed)

- fix a bogus use of last_SRpnt in st_chk_result

Signed-off-by: Nate Dailey <nate.dailey@stratus.com>
Signed-off-by: Kai Makisara <kai.makisara@kolumbus.fi>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-08 09:33:48 -05:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00