Commit Graph

43959 Commits

Author SHA1 Message Date
Dinh Nguyen 381a65c21a ARM: multi_v7_defconfig: enable DW_WATCHDOG
The watchdog timer on the SoCFPGA platform is the Synopsys Designware watchdog.
Enable CONFIG_DW_WATCHDOG for the driver to get built.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-04 13:25:33 -08:00
Linus Walleij 418d551656 ARM: nomadik: fix up SD/MMC DT settings
The DTSI file for the Nomadik does not properly specify how the
PL180 levelshifter is connected: the Nomadik actually needs all
the five st,sig-dir-* flags set to properly control all lines out.

Further this board supports full power cycling of the card, and
since this variant has no hardware clock gating, it needs a
ridiculously low frequency setting to keep up with the ever
overflowing FIFO.

The pin configuration set-up is a bit of a mystery, because of
course these pins are a mix of inputs and outputs. However the
reference implementation sets all pins to "output" with
unspecified initial value, so let's do that here as well.

Cc: stable@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-04 13:24:08 -08:00
Olof Johansson 6c388927a7 mvebu fixes for 4.5 (part 1)
- Fix dts on buffalo linksations machines (gpios and leds)
 - Fix dts partition node according to new binding introduced in v4.5
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iEYEABECAAYFAlarqHEACgkQCwYYjhRyO9U9EwCgrIBJ9aWaYISd9+4lklVH647f
 RYoAniRo8RbO+VoZchRCLdAe0ZR8AlaL
 =/RvS
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-fixes-4.5-1' of git://git.infradead.org/linux-mvebu into fixes

mvebu fixes for 4.5 (part 1)

- Fix dts on buffalo linksations machines (gpios and leds)
- Fix dts partition node according to new binding introduced in v4.5

* tag 'mvebu-fixes-4.5-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: orion5x: gpio pin fixes for linkstation lswtgl
  ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wvl/vl
  ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wxl/wsxl
  ARM: dts: kirkwood: gpio pin fixes for linkstation ls-wvl/vl
  ARM: dts: kirkwood: gpio pin fixes for linkstation ls-wxl/wsxl
  ARM: mvebu: ix4-300d: Add compatible property to "partitions" node
  ARM: mvebu: kirkwood: Add compatible property to "partitions" node

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01 12:24:31 -08:00
Olof Johansson 7f7420f07e Fixes for omaps with the most intrusive stuff being read-only data
assembly fixes, the other things are mostly board related:
 
 - A series of omap assembly code fixes to fix issues with rodata with
   ARM_KERNMEM_PERMS enabled. We had several places writing to rodata,
   which is bad. The fix in most cases is to load the value from data
   section using a pointer. Let's also enable ARM_KERNMEM_PERMS so
   DEBUG_RODATA gets selected by default. And while testing things,
   I also added few more loadable driver modules to the defconfig that
   I seem to need quite often.
 
 - Fix a long standing omap5 RTC mystery and enable RTC where we need
   to ensure the SoC msecure pin is high so we can write to the RTC
   registers.
 
 - Fix irq types for am437x
 
 - A series of minor dts fixes for sbc-am57x and cl-som-am57x
 
 - Fixes for torpedo dts to make WLAN behave and to remove a duplicate
   i2c rate entry
 
 This series also includes few minor changes that are not stricly
 fixes, but would be good to get in during the early -rc cycle:
 
 - Remove legacy mailbox platform data that is no longer needed
 
 - Add the pdata-quirks needed for the new pwm-omap-dmtimer so
   people can use it
 
 - Enable ti,mbox-send-noirq that's needed by wkup_m3 driver
 
 - Enable SPLIT and DWARF4 in omap2plus_defconfig as it makes the
   initramfs quite a bit smaller
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWqT5XAAoJEBvUPslcq6Vz01kP/jdo4hXcvUgtG9W5yIxortiK
 Sg2D0omkQzwgNHhh9K/ezOYaGwgRJ8grEkCYImlr7n/zGr7Mpt3eUiJC7gbV8xg4
 nEPNxGoIQSQ3A0NVV+6gtnHHco4ajih/l7A+0UDZy/x375VExW46HS0KLWy2hov9
 WgEJDNBIZBdBN3S3CJ2pO1+I4KHkk9vqaDHjfDaSnyQXRKxQTziubnk5KhfcYpMS
 0fDY9BqJFDp0gbE3Dp3GOk/eEW+6XQAUFxK2i+rp3fmOhENBbbEAPWJ4qM8VFQr+
 ITQdd2o/SXE3hnqoXLMpCBFPSBDD7UMoxIp3gtMu/YwRePw8zETeQKYuHwSO69oz
 BKoKXJKg1WfiTquCzwijlqvOhMi0KzVSBi+X5MSQaUl+30qrHXdY4ecHvQAzp9vZ
 OtkCLI5SLmxCRLQllssifey91IfaWEm01So/XgvSgqUVfTLrUcBU5emlgwK5NMy5
 ya6NsOu0ME9k6GuGCWupGnVpUHlIAj4e60xisiVYI9GP4sN8aCey/RiOR+rWZW+C
 YYYxttRqRlwKH1VHNow0aWCG15hNjWGW8XWCSNyJeCCigObEwQxBE1xfAwGeGZ5s
 FA+ogfZesvPu/u1ychgF1e0w30P9AnWhTt1dTR7TNxLBqFsrbhWz+r0jOTzrlYaR
 6l2eMQYPlQ4569rGIbdF
 =NqvQ
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v4.5/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Fixes for omaps with the most intrusive stuff being read-only data
assembly fixes, the other things are mostly board related:

- A series of omap assembly code fixes to fix issues with rodata with
  ARM_KERNMEM_PERMS enabled. We had several places writing to rodata,
  which is bad. The fix in most cases is to load the value from data
  section using a pointer. Let's also enable ARM_KERNMEM_PERMS so
  DEBUG_RODATA gets selected by default. And while testing things,
  I also added few more loadable driver modules to the defconfig that
  I seem to need quite often.

- Fix a long standing omap5 RTC mystery and enable RTC where we need
  to ensure the SoC msecure pin is high so we can write to the RTC
  registers.

- Fix irq types for am437x

- A series of minor dts fixes for sbc-am57x and cl-som-am57x

- Fixes for torpedo dts to make WLAN behave and to remove a duplicate
  i2c rate entry

This series also includes few minor changes that are not stricly
fixes, but would be good to get in during the early -rc cycle:

- Remove legacy mailbox platform data that is no longer needed

- Add the pdata-quirks needed for the new pwm-omap-dmtimer so
  people can use it

- Enable ti,mbox-send-noirq that's needed by wkup_m3 driver

- Enable SPLIT and DWARF4 in omap2plus_defconfig as it makes the
  initramfs quite a bit smaller

* tag 'omap-for-v4.5/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (23 commits)
  ARM: dts: am57xx: sbc-am57x: correct Eth PHY settings
  ARM: dts: am57xx: cl-som-am57x: fix CPSW EMAC pinmux
  ARM: dts: am57xx: sbc-am57x: fix UART3 pinmux
  ARM: dts: am57xx: cl-som-am57x: update SPI Flash frequency
  ARM: dts: am57xx: cl-som-am57x: set HOST mode for USB2
  ARM: dts: am57xx: sbc-am57x: fix SB-SOM EEPROM I2C address
  ARM: dts: LogicPD Torpedo: Revert Duplicative Entries
  ARM: dts: am437x: pixcir_tangoc: use correct flags for irq types
  ARM: dts: am4372: fix irq type for arm twd and global timer
  ARM: dts: Fix wl12xx missing clocks that cause hangs
  ARM: OMAP: Add PWM dmtimer platform data quirks
  ARM: omap2plus_defconfig: Enable ARM_KERNMEM_PERMS and few loadable modules
  ARM: OMAP2+: Fix ppa_zero_params and ppa_por_params for rodata
  ARM: OMAP2+: Fix l2_inv_api_params for rodata
  ARM: OMAP2+: Fix save_secure_ram_context for rodata
  ARM: OMAP2+: Fix l2dis_3630 for rodata
  ARM: OMAP2+: Fix wait_dll_lock_timed for rodata
  ARM: OMAP2+: Remove legacy mailbox device instantiation
  ARM: dts: AM4372: Add ti,mbox-send-noirq to wkup_m3 mailbox
  ARM: dts: AM33xx: Add ti,mbox-send-noirq to wkup_m3 mailbox
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01 12:22:52 -08:00
Olof Johansson b83132f762 First fixes for 4.5. Only DT changes:
- sama5d4: error in DBGU index
 - addition of phy properties in several boards
 - at91sam9n12ek fix a panel compatible string
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJWqdjFAAoJEAf03oE53VmQG30H/R9luD6d9ebmhaOE7ay40HAy
 RrG8wtRQ/zgxf37SntoJxyVxxXWsDsb7sOR1LRXiT7FEGWr3Eip7B1uwmasC8pky
 ich2Yj5pGVUH+qscm26GDGyHbNwIrFOQyl1t/R6upVpITlXa0bpaEIXx3RejH8PN
 Wk4pMZg/4OkUXlcmYNU0Rz8ban8GfJ428bkLxMKeUXUAjvevNlWqTvOqC+QIrzUC
 w3iDoXfhc81sqrOzBzW44H28g7rh//d3TAfzMbM1BJti880QkP+CksG5qHvogI5f
 olN4+9QmV9tLXOr2K6iUkM8dwzHYW/3PPBR1CHODjSLP0rQ2Assy+DPxyO64Rtk=
 =jJrB
 -----END PGP SIGNATURE-----

Merge tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes

First fixes for 4.5. Only DT changes:
- sama5d4: error in DBGU index
- addition of phy properties in several boards
- at91sam9n12ek fix a panel compatible string

* tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: dts: at91: sama5d4 xplained: fix phy0 IRQ type
  ARM: dts: at91: sama5d4 xplained: properly mux phy interrupt
  ARM: dts: at91: sama5d4ek: add phy address and IRQ for macb0
  ARM: dts: at91: sama5d2 xplained: add phy address and IRQ for macb0
  ARM: dts: at91: at91sam9n12ek: fix panel compatible string
  ARM: dts: at91: sama5d4: fix instance id of DBGU

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01 12:21:15 -08:00
Masahiro Yamada c65cd255e4 ARM: realview: use "depends on" instead of "if" after prompt
This platform recently moved to multi-platform, so missed the global
fixup by commit e324654294 ("ARM: use "depends on" for SoC configs
instead of "if" after prompt").  Fix it now.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01 12:19:10 -08:00
Masahiro Yamada 990591ee39 ARM: tango: use "depends on" instead of "if" after prompt
This platform was recently added, so missed the global fixup by
commit e324654294 ("ARM: use "depends on" for SoC configs instead
of "if" after prompt").  Fix it now.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01 12:18:49 -08:00
Masahiro Yamada c38ac80eb4 ARM: tango: use const and __initconst for smp_operations
This newly added code missed the global fixup by commit 75305275a7
("ARM: use const and __initconst for smp_operations").  So fix it now.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01 12:18:23 -08:00
Masahiro Yamada 567fdd9d91 ARM: realview: use const and __initconst for smp_operations
This newly added code missed the global fixup by commit 75305275a7
("ARM: use const and __initconst for smp_operations").  So fix it now.

Also, add missing "static" qualifier.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-01 12:17:30 -08:00
Russell King 03590cb56d ARM: wire up copy_file_range() syscall
Add the copy_file_range() syscall to ARM.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-01-27 18:14:46 +00:00
Dmitry Lifshitz ab342c77fa ARM: dts: am57xx: sbc-am57x: correct Eth PHY settings
Update Eth PHY settings to make it possible to run both phys at 1Gbps.

Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27 09:19:31 -08:00
Dmitry Lifshitz 2fe8bab2b0 ARM: dts: am57xx: cl-som-am57x: fix CPSW EMAC pinmux
Fix CPSW EMAC pinmux

Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27 09:19:31 -08:00
Dmitry Lifshitz 5ddfc9fc9b ARM: dts: am57xx: sbc-am57x: fix UART3 pinmux
Fix UART3 pinmux.

Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27 09:19:31 -08:00
Dmitry Lifshitz e46c408fc7 ARM: dts: am57xx: cl-som-am57x: update SPI Flash frequency
On-board SPI flash cat act at 48Mhz SPI bus frequency.
Update the DT frequency property.

Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27 09:19:30 -08:00
Dmitry Lifshitz c71ff38e32 ARM: dts: am57xx: cl-som-am57x: set HOST mode for USB2
Setup USB2 to act in "HOST" mode by default.

Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27 09:19:30 -08:00
Dmitry Lifshitz bd73da8c3b ARM: dts: am57xx: sbc-am57x: fix SB-SOM EEPROM I2C address
Fix SB-SOM EEPROM I2C address

Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27 09:19:30 -08:00
Adam Ford 2dfdc75442 ARM: dts: LogicPD Torpedo: Revert Duplicative Entries
Revert commit 7cd6ca770d ("ARM: dts: Change I2C2 and I2C3 to 400KHz
for LogicPD Torpedo DM3730 devkit")  It was already done and it is
just a duplicate.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27 09:15:53 -08:00
Grygorii Strashko 95e7d03e08 ARM: dts: am437x: pixcir_tangoc: use correct flags for irq types
Now IRQs for Pixcir Tangoc touchscreen are defined using
IRQ_TYPE_NONE in am437x-gp-evm.dts and am43x-epos-evm.dts wich
do not correspond HW.

Hence, update am437x-gp-evm.dts and am43x-epos-evm.dts files
and use correct flag IRQ_TYPE_EDGE_FALLING for irq types.

While here, remove duplicated irq declaration for pixcir_ts@5c node
in am437x-gp-evm.dts.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27 08:56:24 -08:00
Grygorii Strashko 84fb225ad2 ARM: dts: am4372: fix irq type for arm twd and global timer
As per ARM documentation
PPI(0) ID27 - global timer interrupt is rising-edge sensitive.
PPI(2) ID29 - twd interrupt is rising-edge sensitive.

and the same is proved by GIC distributor register value
GIC_DIST_CONFIG(0xC04) = 0x7DC00000.

Hence, set IRQ triggering type to IRQ_TYPE_EDGE_RISING
for ARM TWD and Global timers.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-27 08:47:13 -08:00
Nicolas Ferre e873cc022c ARM: dts: at91: sama5d4 xplained: fix phy0 IRQ type
For phy0 KSZ8081, the type of GPIO IRQ should be "level low" instead of
"edge falling".

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Fixes: 38153a0178 ("ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board")
Cc: <stable@vger.kernel.org> # 4.1+
2016-01-27 11:14:25 +01:00
Alexandre Belloni f505dba762 ARM: dts: at91: sama5d4 xplained: properly mux phy interrupt
No interrupt were received from the phy because PIOE 1 may not be properly
muxed. It prevented proper link detection, especially since commit
321beec504 ("net: phy: Use interrupts when available in NOLINK state")
disables polling.

Cc: <stable@vger.kernel.org> # 4.4
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-01-27 11:14:24 +01:00
Wenyou Yang aae6b18f5c ARM: dts: at91: sama5d4ek: add phy address and IRQ for macb0
On SAMA5D4EK board, the Ethernet doesn't work after resuming from the suspend
state.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
[nicolas.ferre@atmel.com: adapt to newer kernel]
Fixes: 38153a0178 ("ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board")
Cc: <stable@vger.kernel.org> # 4.1+
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-01-27 11:14:23 +01:00
Nicolas Ferre 6c482fd15d ARM: dts: at91: sama5d2 xplained: add phy address and IRQ for macb0
After 57a38effa5 (net: phy: micrel: disable broadcast for KSZ8081/KSZ8091)
the macb0 interface has difficulties to come back from power saving mode if
address not explicitly set up.
As the micrel phy on the board is actually configured to show up at address 1
we use this explicitly.
Adding the phy node and its real address fixes the issue.

The phy IRQ and associated pinmux node is also added.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: stable@vger.kernel.org # 4.4+ // manual merge needed
2016-01-27 11:14:22 +01:00
Alexandre Belloni 1a469ae2ce ARM: dts: at91: at91sam9n12ek: fix panel compatible string
Properly use qiaodian as the vendor prefix for the panel.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-01-27 11:13:11 +01:00
Mohamed Jamsheeth Hajanajubudeen 929e883f2b ARM: dts: at91: sama5d4: fix instance id of DBGU
Change instance id of DBGU to 45.

Signed-off-by: Mohamed Jamsheeth Hajanajubudeen <mohamedjamsheeth.hajanajubudeen@atmel.com>
Fixes: 7c661394c5 ("ARM: at91: dt: add device tree file for SAMA5D4 SoC")
Cc: stable@vger.kernel.org   # 3.18+
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-01-27 11:11:51 +01:00
Kees Cook 7f66cd3f54 ARM: 8500/1: fix atags_to_fdt with stack-protector-strong
Building with CONFIG_CC_STACKPROTECTOR_STRONG triggers protection code
generation under CONFIG_ARM_ATAG_DTB_COMPAT but this is too early for
being able to use any of the stack_chk code. Explicitly disable it for
only the atags_to_fdt bits.

Suggested-by: zhxihu <zhxihu@marvell.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-01-26 23:49:26 +00:00
Adam Ford 0ea24daae0 ARM: dts: Fix wl12xx missing clocks that cause hangs
The tcxo-clock-frequency binding is listed as optional,
but without it the wl12xx used on the torpedo + wireless
may hang.  Scanning also appears broken without this patch.

Signed-off-by: Adam Ford <aford173@gmail.com>
Fixes: 687c276761 ("ARM: dts: Add minimal support for LogicPD
Torpedo DM3730 devkit")
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-25 10:52:35 -08:00
Tony Lindgren 7e3b120770 Merge branch 'enable-devices' into omap-for-v4.5/fixes 2016-01-25 10:46:21 -08:00
Neil Armstrong 20437f79f6 ARM: OMAP: Add PWM dmtimer platform data quirks
In order to set the currently platform dependent dmtimer
functions pointers as platform data for the pwm-omap-dmtimer
platform driver, add it to plat-omap auxdata_lookup table.

Suggested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-25 09:51:28 -08:00
Roger Shimizu ff61ee84e7 ARM: dts: orion5x: gpio pin fixes for linkstation lswtgl
Here're a few gpio pin related fixes:
  - remove pinctrl-0 definition from pinctrl, since those pins are used
    in other places such as gpio-fan and regulators.
  - keep initial state of power led
  - fix for alarm pin of gpio-fan.

Fixes: dc57844a73 ("ARM: dts: orion5x: add buffalo linkstation ls-wtgl")
Signed-off-by: Roger Shimizu <rogershimizu@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-01-25 16:22:59 +01:00
Roger Shimizu 0418138e2f ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wvl/vl
The GPIOs controlling the LEDs, listed below, are active high, not low:
  - gpio-leds: "lswvl:red:alarm" pin
  - gpio-leds: "lswvl:red:func" pin
  - gpio-leds: "lswvl:amber:info" pin
  - gpio-leds: "lswvl:blue:func" pin
  - gpio-leds: "lswvl:red:hdderr{0,1}" pin

Fixes: c43379e150 ("ARM: dts: add buffalo linkstation ls-wvl/vl")
Signed-off-by: Roger Shimizu <rogershimizu@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-01-25 15:05:11 +01:00
Roger Shimizu e98bd707e3 ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wxl/wsxl
The GPIOs controlling the LEDs, listed below, are active high, not low:
  - gpio-leds: "lswxl:blue:power" pin
  - gpio-leds: "lswxl:red:func" pin
  - gpio-leds: "lswxl:red:hdderr{0,1}" pin

Fixes: e54e4b1b62 ("ARM: dts: add buffalo linkstation ls-wxl/wsxl")
Signed-off-by: Roger Shimizu <rogershimizu@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-01-25 14:49:26 +01:00
Roger Shimizu 6f86e9adc5 ARM: dts: kirkwood: gpio pin fixes for linkstation ls-wvl/vl
For kirkwood, gpio pins starts from 32 are in the 2nd bank, so it should be
converted to "gpio1 <pin minus 32>" in dts file.
e.g. gpio 40 should be "gpio1 8"

The pin/bank issue was found when discussing Debian Bug #810894
  [https://bugs.debian.org/810894#47]

Fixes: c43379e150 ("ARM: dts: add buffalo linkstation ls-wvl/vl")
Reported-by: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
Signed-off-by: Roger Shimizu <rogershimizu@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-01-25 14:49:11 +01:00
Roger Shimizu 144e08abe8 ARM: dts: kirkwood: gpio pin fixes for linkstation ls-wxl/wsxl
For kirkwood, gpio pins starts from 32 are in the 2nd bank, so it should be
converted to "gpio1 <pin minus 32>" in dts file.
e.g. gpio 40 should be "gpio1 8"

Besides, a few other pin fixes for ls-wxl/wsxl, to match with mpp pin
definition:
  - gpio-leds: "lswxl:blue:power" pin
  - gpio-leds: "lswxl:red:func" pin
  - gpio-leds: "lswxl:red:hdderr0" pin
  - gpio-leds: "lswxl:red:hdderr1" pin
  - gpio-fan:  low/high/alarm pin

The pin/bank issue was found when discussing Debian Bug #810894
  [https://bugs.debian.org/810894#47]

Fixes: e54e4b1b62 ("ARM: dts: add buffalo linkstation ls-wxl/wsxl")
Reported-by: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
Signed-off-by: Roger Shimizu <rogershimizu@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-01-25 14:48:57 +01:00
Geert Uytterhoeven 293de94cd6 ARM: mvebu: ix4-300d: Add compatible property to "partitions" node
As of commit e488ca9f8d ("doc: dt: mtd: partitions: add compatible
property to "partitions" node"), the "partitions" subnode of an SPI
FLASH device node must have a compatible property. The partitions are no
longer detected if it is not present.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-01-25 13:16:04 +01:00
Geert Uytterhoeven 84d92dd3b6 ARM: mvebu: kirkwood: Add compatible property to "partitions" node
As of commit e488ca9f8d ("doc: dt: mtd: partitions: add compatible
property to "partitions" node"), the "partitions" subnode of an SPI
FLASH device node must have a compatible property. The partitions are no
longer detected if it is not present.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-01-25 13:16:04 +01:00
Linus Torvalds 20c759ca98 Merge branch 'akpm' (patches from Andrew)
Merge small final update from Andrew Morton:

 - DAX feature work: add fsync/msync support

 - kfree cleanup, MAINTAINERS update

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  MAINTAINERS: return arch/sh to maintained state, with new maintainers
  tree wide: use kvfree() than conditional kfree()/vfree()
  dax: never rely on bh.b_dev being set by get_block()
  xfs: call dax_pfn_mkwrite() for DAX fsync/msync
  ext4: call dax_pfn_mkwrite() for DAX fsync/msync
  ext2: call dax_pfn_mkwrite() for DAX fsync/msync
  dax: add support for fsync/sync
  mm: add find_get_entries_tag()
  dax: support dirty DAX entries in radix tree
  pmem: add wb_cache_pmem() to the PMEM API
  dax: fix conversion of holes to PMDs
  dax: fix NULL pointer dereference in __dax_dbg()
2016-01-23 11:13:56 -08:00
Linus Torvalds 79d245327f ARM: SoC support for Tegra platforms for v4.5
Here's a single-SoC topic branch that we've staged separately. Mainly
 because it was hard to sort the branch contents in a way that fit our
 existing branches due to some refactorings.
 
 The code has been in -next for quite a while, but we staged it in arm-soc
 a bit late, which is why we've kept it separate from the other updates
 and are sending it separately here.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWoqsGAAoJEIwa5zzehBx3/F4QAJo4FEU+KTOhUggDV+KPn9ZD
 Re1SAKTpKo9elMdDdTZZObHYPf+RXqun50C4pQiSVfyDm9syZaxtWjjZvshwsATq
 178fNN+0C/7aenj8Zpq/NrLwBl1N51cSdc1ii3TcN/OA5XDgpmGJTdqMziDiXAkd
 Nt847qSEhIvAfOtcZR2drk2wBKGCTA/NpGU3HCryPAlO7RnAbJY4Ywj0bU01Lc9y
 bSJYh1SPaa1PdDCBJjtbk6L8iGl39K5oy0e6ehECEviLBVtWIL0zqh101XGbPVtv
 vtpVJ40NciiHknCBEiJkYiY9b7BNZYMeuwLarqk7TxyW4Vm5Rl5CFkEot0X/b70J
 XSxca6KGLzSgmCYDzJtLgtmyBUDoGqNwiPnNVIjrGIt9uOlWeHGb7TUKjBZaJr7G
 nXiKKU17zhb28hEo8JjIGcuFcOGlwlBhoOKhOYePiXX/iA03M8SEZg3XXyYMiaVz
 j9PcfOQptc7CyCAyiUQW36cZc1vQlnNxpiZstF0QsJ+Poe1kPlJIVpOarrfFdvh5
 wJrS4L5YoIzb5robsNLNJ6XXiRnqvxgO6dEdA3RoI1bMaFsXVRCb03EoxVYqS4RF
 o+4h0KYQ8gPmAhA/ii/IDHps51TCCDOolAyWLfmYlqXu76IjOlC1LTYxi8RAGZNL
 xExyC0A3YDfONv6mx07R
 =LG3u
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-tegra' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC support for Tegra platforms from Olof Johansson:
 "Here's a single-SoC topic branch that we've staged separately.  Mainly
  because it was hard to sort the branch contents in a way that fit our
  existing branches due to some refactorings.

  The code has been in -next for quite a while, but we staged it in
  arm-soc a bit late, which is why we've kept it separate from the other
  updates and are sending it separately here"

* tag 'armsoc-tegra' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: tegra: Add NVIDIA Jetson TX1 Developer Kit support
  arm64: tegra: Add NVIDIA P2597 I/O board support
  arm64: tegra: Add NVIDIA Jetson TX1 support
  arm64: tegra: Add NVIDIA P2571 board support
  arm64: tegra: Add NVIDIA P2371 board support
  arm64: tegra: Add NVIDIA P2595 I/O board support
  arm64: tegra: Add NVIDIA P2530 main board support
  arm64: tegra: Add Tegra210 support
  arm64: tegra: Add NVIDIA Tegra132 Norrin support
  arm64: tegra: Add Tegra132 support
  ARM: tegra: select USB_ULPI from EHCI rather than platform
  ARM: tegra: Ensure entire dcache is flushed on entering LP0/1
  amba: Hide TEGRA_AHB symbol
  soc/tegra: Add Tegra210 support
  soc/tegra: Provide per-SoC Kconfig symbols
2016-01-22 17:30:52 -08:00
Linus Torvalds 1b8ee1ec41 ARM: SoC fixes for v4.5 merge window
A few fixes for fallout that we didn't catch in time in -next, or smaller
 warning fixes that have been discovered since.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWolruAAoJEIwa5zzehBx3wIsQAJzOv9kJIw7c+Uh8Wu2CkEmv
 IJMiL8n7PvtLq/USOYKKIqf6KeGjedMNM1aFSRuDQ0HqdBB4ysyv4Go6CMUlxSv7
 fbr5/AmZlrgBKZwvjh2SzehvvhuaWuDMzo+1lDm2cqQ8u/kmEQPcDRG/eTDDV5nf
 Ym/dDCh8PXHTFmuad2a3qznNod5kHNE+agOgjTYZxZvA67Ys8HGoaXlYtJijqv5p
 KwcNspT0vn7Tf22XrEsrkR9bgfyNHcdiB+qSJBYWqH00Q0ew6zfLI1FWPUNPLvg6
 HgoNIxBIaNdPS9v/EH70uhvIeWGTH0Yz/YiNzm3lp+rIWutdDPnKW0DnxiIACGis
 e9b4f24OfPWeveh+KWdVgyRYk/hNvO9umuJNyM6G2PP9fWRldqZXfR0vVKY6Wfzr
 WYprBAbY/LvuZBsyser3UNokD2pxaLGCTrkRiH/Y/hQuhfu8HjDmetoKI5Vz8Irn
 2/rAWL0yidpblPd6hZAbz0b/Z2SCRU+eRF6Q10ovr9Ug3AY8oEKrlt6emcbDoFie
 1geHAJT+HGejR4Hl9rEixZQqJ0o2BtyyETqZpM1hY6eOE7uz/bw59kfjLLCCHcr7
 mZx9DUjAH5trkvPVlj/WUXPoryW9Ra66eREXsIwajBQb53ww6gdr/VAYCYFDx/VF
 V10Vs46iT8lLoqY/YsT/
 =PRjJ
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "A few fixes for fallout that we didn't catch in time in -next, or
  smaller warning fixes that have been discovered since"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  soc: qcom/spm: shut up uninitialized variable warning
  ARM: realview: fix device tree build
  ARM: debug-ll: fix BCM63xx entry for multiplatform
  ARM: dts: armadillo800eva Correct extal1 frequency to 24 MHz
2016-01-22 17:26:00 -08:00
Tetsuo Handa 1d5cfdb076 tree wide: use kvfree() than conditional kfree()/vfree()
There are many locations that do

  if (memory_was_allocated_by_vmalloc)
    vfree(ptr);
  else
    kfree(ptr);

but kvfree() can handle both kmalloc()ed memory and vmalloc()ed memory
using is_vmalloc_addr().  Unless callers have special reasons, we can
replace this branch with kvfree().  Please check and reply if you found
problems.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Jan Kara <jack@suse.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Acked-by: David Rientjes <rientjes@google.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Boris Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-22 17:02:18 -08:00
Olof Johansson 53c517a837 Renesas ARM Based SoC Fixes for v4.5
Correct extal1 frequency of armadillo800eva board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWoESmAAoJENfPZGlqN0++RsMP/1q9XvQYUc6xF0LqQR8jLx3N
 FGt/uHiWEzkprfMNRAimX3l6UDv+ae44S58kyCjfOEwz9H58JtFnhlg+Ofq8+ibu
 UklF/niPl4UvjPaNaeIZIoBlt6CdjnO53nzCTjCsT7kGv1lYHE+2UCwFiuQtQdSB
 pH0frq+kDlSpSumiMlsmwajVqf/5kWjoRvhLTztKeB6soxlVFkX3FoKURnCQhaXJ
 J7agAC8hK8vBwL3xUXCTL9ozBxlkgCY7uwenDr97mCQfl5aEvtOcXhLxafhetuKM
 ZvgD1BO2u4lAQDoEFEw3X4T9To4R2PNvgNslhTuMLBM3EUa4kvZTykM6PKitE506
 cTHwCzvI2JnXK6h7ySLQWVDwG8/gGAjCbvt5ZXztOrb7Nqu3kr5hizcbHKBYCWfu
 7WOxqFbBj2j+D4TqzFh8B6si4IQG8ZPOCa9gmtpz1FeE6Yg5/gM3cV+1DP6/VxJ+
 C5OqjNUPK8DKOu0ZTpR1DqsDtIfJ/O+psk6AlLigg4GzkIuTZQ8nDVOTaUtnk2G8
 MTF2IWgd0x5659mhvDOCj3F4IsfjHS2zuczAnU4eCDcHLuplAguOrtG/NnP+egTI
 nGlsF+DFXkOXhz/vkvS7AgJwAhAm2KXgtLCA9LvNxfz9youZKc/CbxwDVPV/cq9F
 RSvr3ktkSYro+q8Wx6ch
 =YGew
 -----END PGP SIGNATURE-----

Merge tag 'renesas-fixes-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes

Renesas ARM Based SoC Fixes for v4.5

Correct extal1 frequency of armadillo800eva board

* tag 'renesas-fixes-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: dts: armadillo800eva Correct extal1 frequency to 24 MHz

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-01-22 08:28:23 -08:00
Tony Lindgren 143c6fe3a4 ARM: omap2plus_defconfig: Enable ARM_KERNMEM_PERMS and few loadable modules
With recent omap assembly fixes for CONFIG_DEBUG_RODATA, we can
now use DEBUG_RODATA. Let's enable ARM_KERNMEM_PERMS so that
DEBUG_RODATA gets selected by default. This way we can make sure
any related issues are caught early.

And while testing things on various devices, I noticed we're
missing few loadable modules to make things more usable:

- USB Ethernet for smsc75xx, we only have smsc97xx right now

- Basic USB serial drivers for things like ftdi and pl2303 ports

- Blinking leds with pca963x

Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-22 08:26:08 -08:00
Tony Lindgren 4da597d166 ARM: OMAP2+: Fix ppa_zero_params and ppa_por_params for rodata
We don't want to write to .text so let's move ppa_zero_params and
ppa_por_params to .data and access them via pointers.

Note that I have not been able to test as we I don't have a HS
omap4 to test with. The code has been changed in similar way as
for omap3 though.

Cc: Kees Cook <keescook@chromium.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tero Kristo <t-kristo@ti.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Cc: stable@vger.kernel.org # v4.0+
Fixes: 1e6b48116a ("ARM: mm: allow non-text sections to be
non-executable")
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-22 08:26:08 -08:00
Tony Lindgren 0a0b132755 ARM: OMAP2+: Fix l2_inv_api_params for rodata
We don't want to write to .text, so let's move l2_inv_api_params
to .data and access it via a pointer.

Cc: Kees Cook <keescook@chromium.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tero Kristo <t-kristo@ti.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Cc: stable@vger.kernel.org # v4.0+
Fixes: 1e6b48116a ("ARM: mm: allow non-text sections to be
non-executable")
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-22 08:26:08 -08:00
Tony Lindgren a5311d4d13 ARM: OMAP2+: Fix save_secure_ram_context for rodata
We don't want to write to .text and we can move save_secure_ram_context
into .data as it all gets copied into SRAM anyways.

Cc: Kees Cook <keescook@chromium.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: Tero Kristo <t-kristo@ti.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Cc: stable@vger.kernel.org # v4.0+
Fixes: 1e6b48116a ("ARM: mm: allow non-text sections to be
non-executable")
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-22 08:26:08 -08:00
Tony Lindgren eeaf9646ac ARM: OMAP2+: Fix l2dis_3630 for rodata
We don't want to write to .text section. Let's move l2dis_3630
to .data and access it via a pointer.

For calculating the offset, let's optimize out the add and do it
in ldr/str as suggested by Nicolas Pitre <nicolas.pitre@linaro.org>.

Cc: Kees Cook <keescook@chromium.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: stable@vger.kernel.org # v4.0+
Acked-by: Nicolas Pitre <nico@linaro.org>
Cc: stable@vger.kernel.org # v4.0+
Fixes: 1e6b48116a ("ARM: mm: allow non-text sections to be
non-executable")
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-22 08:26:08 -08:00
Tony Lindgren d9db591033 ARM: OMAP2+: Fix wait_dll_lock_timed for rodata
We don't want to be writing to .text so it can be set rodata.
Fix error "Unable to handle kernel paging request at virtual address
c012396c" in wait_dll_lock_timed if CONFIG_DEBUG_RODATA is selected.

As these counters are for debugging only and unused, we can just
remove them.

Cc: Kees Cook <keescook@chromium.org>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Richard Woodruff <r-woodruff2@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tero Kristo <t-kristo@ti.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Cc: stable@vger.kernel.org # v4.0+
Fixes: 1e6b48116a ("ARM: mm: allow non-text sections to be
non-executable")
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-22 08:26:08 -08:00
Suman Anna 4850d43143 ARM: OMAP2+: Remove legacy mailbox device instantiation
The legacy-style mailbox device creation is supported currently
only for OMAP3, as all other SoCs are DT-boot only. Even on this
SoC, there are no client drivers that utilize these mailbox devices.
So, clean up the legacy-style mailbox device instantiation logic.
The mailbox devices are already present and supported for the DT
boot on OMAP3.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-21 13:57:24 -08:00
Keerthy cf19f3ab89 ARM: dts: AM4372: Add ti,mbox-send-noirq to wkup_m3 mailbox
Add ti,mbox-send-noirq to wkup_m3 mailbox so that messages using
wkup_m3 mailbox are sent without triggering any further interrupts.
This is required to be able to send multiple messages to the WkupM3
after the mailbox usage logic adjustment in the wkup_m3_ipc driver.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Dave Gerlach <d-gerlach@ti.com>
[s-anna@ti.com: revise commit description]
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-21 13:54:27 -08:00
Dave Gerlach 2800971f73 ARM: dts: AM33xx: Add ti,mbox-send-noirq to wkup_m3 mailbox
Add ti,mbox-send-noirq to wkup_m3 mailbox so that messages using
wkup_m3 mailbox are sent without triggering any further interrupts.
This is needed to achieve lower power numbers during CPU idle on
AM33xx.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
[s-anna@ti.com: revise commit description]
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-21 13:53:58 -08:00