Commit Graph

165 Commits

Author SHA1 Message Date
Michal Marek ff5b1ce6b2 Merge branch 'kbuild/rc-fixes' into kbuild/misc 2016-12-11 21:20:34 +01:00
Anton Tikhomirov 51a5f81079 kbuild/mkspec: avoid using brace expansion
Brace expansion might not work properly if _buildshell RPM macro
points to a shell other than bash. Particularly, with _bulidshell
defined to /bin/dash it leads to broken build and source symlinks.

Signed-off-by: Anton Tikhomirov <anton.tikhomirov@cdnetworks.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2016-12-11 12:07:00 +01:00
Adam Borowski 152b695d74 builddeb: fix cross-building to arm64 producing host-arch debs
Both Debian and kernel archs are "arm64" but UTS_MACHINE and gcc say
"aarch64".  Recognizing just the latter should be enough but let's
accept both in case something regresses again or an user sets
UTS_MACHINE=arm64.

Regressed in cfa88c7: arm64: Set UTS_MACHINE in the Makefile.

Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
2016-11-25 15:39:03 +01:00
Kees Cook d3e2773c4e builddeb: Skip gcc-plugins when not configured
When attempting to build a Debian kernel package, the "scripts/gcc-plugins"
directory does not exist in the output tree unless CONFIG_GCC_PLUGINS=y.
To avoid errors when not defined, this wraps the failing "find" in a config
test.

Reported-by: Frank Paulsen <frobnic+lkml@gmail.com>
Tested-by: Christian Kujau <lists@nerdbynature.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
2016-08-16 10:16:38 +02:00
Linus Torvalds 44cee85a88 Merge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull misc kbuild updates from Michal Marek:

 - coccicheck script improvements by Luis Rodriguez and Deepa Dinamani

 - new coccinelle patches by Yann Droneaud and Vaishali Thakkar

 - debian packaging fixes by Wilfried Klaebe, Henning Schild and Marcin
   Mielniczuk

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  Fix the Debian packaging script on systems with no codename
  builddeb: fix file permissions before packaging
  scripts/coccinelle: require coccinelle >= 1.0.4 on device_node_continue.cocci
  coccicheck: refer to Documentation/coccinelle.txt and wiki
  coccicheck: add support for requring a coccinelle version
  scripts: add Linux .cocciconfig for coccinelle
  coccicheck: replace --very-quiet with --quiet when debugging
  coccicheck: add support for DEBUG_FILE
  coccicheck: enable parmap support
  coccicheck: make SPFLAGS more useful
  coccicheck: move spatch binary check up
  builddeb: really include objtool binary in headers package
  coccinelle: catch krealloc() on devm_*() allocated memory
  coccinelle: recognize more devm_* memory allocation functions
  coccinelle: also catch kzfree() issues
  coccicheck: Allow for overriding spatch flags
  Coccinelle: noderef: Add new rules and correct the old rule
2016-08-02 16:48:52 -04:00
Marcin Mielniczuk 4c586062b2 Fix the Debian packaging script on systems with no codename
When calling `make deb-pkg` on a system with no codename (for example
Arch Linux), lsb_release sometimes outputs `n/a` as the codename.

This breaks dpkg-parsechangelog, which can't process the changelog
correctly.

Signed-off-by: Marcin Mielniczuk <marmistrz.dev@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2016-07-26 23:12:08 +02:00
Henning Schild ca617dc68b builddeb: fix file permissions before packaging
Builddep is not very explicit about file permissions. Actually the file
permissions in the package are largely influenced by the umask of the
user cloning the git and building the package. If that umask does not
set go+r the resulting linux-headers package will prevent non-root users
from building out-of-tree modules. And that is probably just one
unexpected effect.
Being a packaging/install tool builddep should make sure the file
permissions are set correctly and not just derived from a value that is
never checked.

This patch sets ugo read permissions for all packaged files and derives
the executable bit for directories and executables from the file-owner.

Signed-off-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2016-07-26 22:26:46 +02:00
Wilfried Klaebe 15f6d33715 builddeb: really include objtool binary in headers package
On May 4th, Bjørn Mork provided patch 697bbc7b83 ("builddeb: include
objtool binary in headers package"). However, that one only works if
$srctree=$objtree, because the objtool binaries are not written to the
srctree, but to the objtree.

Signed-off-by: Wilfried Klaebe <linux-kernel@lebenslange-mailadresse.de>
Fixes: 697bbc7b83 ("builddeb: include objtool binary in headers package")
Signed-off-by: Michal Marek <mmarek@suse.com>
2016-07-19 11:19:27 +02:00
Emese Revfy 6b90bd4ba4 GCC plugin infrastructure
This patch allows to build the whole kernel with GCC plugins. It was ported from
grsecurity/PaX. The infrastructure supports building out-of-tree modules and
building in a separate directory. Cross-compilation is supported too.
Currently the x86, arm, arm64 and uml architectures enable plugins.

The directory of the gcc plugins is scripts/gcc-plugins. You can use a file or a directory
there. The plugins compile with these options:
 * -fno-rtti: gcc is compiled with this option so the plugins must use it too
 * -fno-exceptions: this is inherited from gcc too
 * -fasynchronous-unwind-tables: this is inherited from gcc too
 * -ggdb: it is useful for debugging a plugin (better backtrace on internal
    errors)
 * -Wno-narrowing: to suppress warnings from gcc headers (ipa-utils.h)
 * -Wno-unused-variable: to suppress warnings from gcc headers (gcc_version
    variable, plugin-version.h)

The infrastructure introduces a new Makefile target called gcc-plugins. It
supports all gcc versions from 4.5 to 6.0. The scripts/gcc-plugin.sh script
chooses the proper host compiler (gcc-4.7 can be built by either gcc or g++).
This script also checks the availability of the included headers in
scripts/gcc-plugins/gcc-common.h.

The gcc-common.h header contains frequently included headers for GCC plugins
and it has a compatibility layer for the supported gcc versions.

The gcc-generate-*-pass.h headers automatically generate the registration
structures for GIMPLE, SIMPLE_IPA, IPA and RTL passes.

Note that 'make clean' keeps the *.so files (only the distclean or mrproper
targets clean all) because they are needed for out-of-tree modules.

Based on work created by the PaX Team.

Signed-off-by: Emese Revfy <re.emese@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
2016-06-07 22:57:10 +02:00
Srinivas Pandruvada 65a9f31c50 scripts/package/Makefile: rpmbuild add support of RPMOPTS
After commit 21a59991ce ("scripts/package/Makefile: rpmbuild is needed
for rpm targets"), it is no longer possible to specify RPMOPTS.
For example, we can no longer able to control _topdir using the following
make command.
make RPMOPTS="--define '_topdir /home/xyz/workspace/'" binrpm-pkg

Fixes: 21a59991ce ("scripts/package/Makefile: rpmbuild is needed for rpm targets")
Cc: <stable@vger.kernel.org> # 4.3+
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2016-05-16 14:01:48 +02:00
Azriel Samson 962475ac2f builddeb: fix missing headers in linux-headers package
The kernel headers package (linux-headers) doesn't include
header files from other architectures required to build
out-of-tree modules.

For e.g. on ARM64, opcodes.h includes the same file from ARM
which causes the following error:
./arch/arm64/include/asm/opcodes.h:1:43: fatal error:
../../arm/include/asm/opcodes.h: No such file or directory
compilation terminated.

Signed-off-by: Azriel Samson <asamson@codeaurora.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
2016-05-10 17:44:53 +02:00
Bjørn Mork 697bbc7b83 builddeb: include objtool binary in headers package
"objtool" is required for building external m dules if "Compile-time
stack metadata validation" is enabled.  Otherwise all builds based
on the headers package fail with:

 make[1]: Entering directory '/usr/src/linux-headers-4.6.0-rc6'
 make[2]: *** No rule to make target 'tools/objtool/objtool', needed by 'foo.o'.  Stop.
 Makefile:1598: recipe for target 'foo.ko' failed
 make[1]: *** [foo.ko] Error 2
 make[1]: Leaving directory '/usr/src/linux-headers-4.6.0-rc6'

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Michal Marek <mmarek@suse.com>
2016-05-10 17:41:01 +02:00
Jiri Kosina 27c3bffd23 kbuild/mkspec: support 'update-bootloader'-based systems
When uninstalling kernel RPM, we're unconditionally calling
"new-kernel-pkg --remove". This is useless on systems which are based on
'update-bootloader' script instead.

Support update-bootloader removal method as well in case the script is
present; contrary to new-kernel-pkg, this needs to be done in %postun,
otherwise update-bootloader will refuse to remove entry for kernel for
which the binary still exists.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Michal Marek <mmarek@suse.com>
2016-04-20 10:01:30 +02:00
Paolo Abeni 6ef41e22a3 kbuild/mkspec: clean boot loader configuration on rpm removal
This patch add a rpm preuninstall scriptlet to cleanup the
boot loader configuration on kernel package uninstall.
The initrd for the to-be-removed kernel is deleted, too.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2016-03-04 22:59:09 +01:00
Jiri Kosina c8b08ca558 kbuild/mkspec: fix grub2 installkernel issue
mkspec is copying built kernel to temporrary location

	/boot/vmlinuz-$KERNELRELEASE-rpm

and runs installkernel on it. This however directly leads to grub2
menuentry for this suffixed binary being generated as well during the run
of installkernel script.

Later in the process the temporary -rpm suffixed files are removed, and
therefore we end up with spurious (and non-functional) grub2 menu entries
for each installed kernel RPM.

Fix that by using a different temporary name (prefixed by '.'), so that
the binary is not recognized as an actual kernel binary and no menuentry
is created for it.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Fixes: 3c9c7a14b6 ("rpm-pkg: add %post section to create initramfs and grub hooks")
Signed-off-by: Michal Marek <mmarek@suse.com>
2016-02-26 16:22:32 +01:00
Riku Voipio 4b63f60313 package Makefile: fix perf-tar targets when outdir is set
building with $srctree != $objtree, perf-tar-* targets fail
to read the MANIFEST file and add the PERF-VERSION-FILE needed
by out-of-tree builds. The build errors and an incorrect tar is created:

$ make O=build-x86 perf-targz-src-pkg
  TAR
cat: ../tools/perf/MANIFEST: No such file or directory
tar: perf-4.1.0-rc8/PERF-VERSION-FILE: Cannot stat: No such file or
dir..
tar: Exiting with failure status due to previous errors

Kbuild sets objtree to "." and srctree to ".." The command to output
MANIFEST becomes:

   $(cd ..; echo $(cat ../tools/perf/MANIFEST))

Without MANIFEST, the entire kernel source tree is added to the perf
source tarball. The *correct* fix is to keep the cd and remove srctree
from cat command line since MANIFEST has wildcards that fail to expand
working directory isn't srctree.

Second, PERF-VERSION-FILE gets not added, because in-tree build path is
hardcoded to Makefile:

   util/PERF-VERSION-GEN ../../$(perf-tar)/ 2>/dev/null)

The PERF-VERSION-GEN needs to be run from tools/perf directory,
and the output directory needs to be changed from relative to
to absolute. This can be achieved using the $(CURDIR) variable.

Also remove the error redirect to /dev/null which hid the error.

Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-11-24 17:49:42 +01:00
Linus Torvalds 5dfe5b2c71 Merge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull misc kbuild updates from Michal Marek:
 "This is the non-critical part of kbuild:

   - several coccinelle updates
   - make deb-pkg creates an armhf package if CONFIG_VFP=y
   - make tags understands some more powerpc macros"

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  coccinelle: Improve checking for missing NULL terminators
  coccinelle: ifnullfree: handle various destroy functions
  coccinelle: ifnullfree: various cleanups
  cocinelle: iterators: semantic patch to delete unneeded of_node_put
  deb-pkg: Add automatic support for armhf architecture
  scripts/coccinelle: fix typos
  coccinelle: misc: remove "complex return code" warnings
  Coccinelle: fix incorrect -include option transformation
  coccinelle: tests: improve odd_ptr_err.cocci
  coccinelle: misc: move constants to the right
  scripts/tags.sh: Teach tags about some powerpc macros
2015-11-10 21:11:58 -08:00
Ben Hutchings 63a478fbc0 deb-pkg: Add automatic support for armhf architecture
The Debian armhf architecture uses the ARM EABI hard-float variant,
whereas armel uses the soft-float variant.  Although the kernel
doesn't use FP itself, CONFIG_VFP must be enabled to support
hard-float userland and will probably be disabled when supporting a
soft-float userland.  So set the architecture to armhf by default when
CONFIG_AEABI and CONFIG_VFP are both enabled.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Acked-by: Fathi Boudra <fathi.boudra@linaro.org>
Reviewed-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-10-26 22:34:26 +01:00
Riku Voipio 8d740a37b9 builddeb: remove debian/files before build
Commit 3716001bcb ("deb-pkg: add source package") added the ability to
create a debian changelog file.  This exposed that previously the
builddeb script hasn't cleared debian/files between builds.

As debian/files keeps accumulating entries, the changes file will end up
growing indefinelty.  With outdated entries in debian/files, builddeb
script will exit with failure.  This regression impacts those who use
"make deb-pkg" target to build kernel into a .deb package and never use
"make mrproper" or other means to clean kernel tree from generated
directories.

To fix the regression, remove debian/files before starting build and in
the generated clean rule.

Fixes: 3716001bcb ("deb-pkg: add source package")
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reported-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Michal Marek <mmarek@suse.cz>
Cc: maximilian attems <maks@stro.at>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-10-16 11:42:28 -07:00
Riku Voipio 3716001bcb deb-pkg: add source package
Make deb-pkg build both source and binary package like make rpm-pkg does.
For people who only need binary kernel package, there is now bindeb-pkg
target, same target also used to build the .deb files if built from the
source package using dpkg-buildpackage.

Generated source package will build the same kernel .config than what
was available for make deb-pkg. The name of the source package can
be set with KDEB_SOURCENAME enviroment variable.

The source package is useful for GPL compliance, or for feeding to a
automated debian package builder.

Cc: Chris J Arges <chris.j.arges@canonical.com>
Reviewed-by: maximilian attems <maks@stro.at>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-09-04 11:25:03 +02:00
Riku Voipio 2680382146 package/Makefile: move source tar creation to a function
Split source tarball creation from rpm-pkg target
so it can be used from deb-pkg target as well. As
added bonus, we can now pretty print TAR the name of
tarball created in quiet mode

This patch prepares the groundwork for deb-pkg source
package adding bit.

Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-09-04 11:24:50 +02:00
Mike Marciniszyn a9dd941d84 kbuild: avoid listing /lib/modules in kernel spec file
This causes conflicts when using multiple kernels built
with this mechanism.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-08-26 11:26:35 +02:00
Christian Kujau bea107b1f1 fallback to hostname in scripts/package/builddeb
I happened to build a kernel with "make deb-pkg" on a machine with no
network connectivity, but this failed with:

[...]
  INSTALL debian/headertmp/usr/include/asm/ (65 files)
hostname: Name or service not known
../scripts/package/Makefile:90: recipe for target 'deb-pkg' failed
make[2]: *** [deb-pkg] Error 1

In scripts/package/builddeb it tries to construct an email address (that
can be queried in /proc/version later on) but with no network,
the "hostname -f" fails. The following patch falls back to just use the
shortname if we cannot determine our FQDN.

Signed-off-by: Christian Kujau <lists@nerdbynature.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-08-19 18:04:44 +02:00
Riku Voipio bf7b00557d deb-pkg: simplify directory creation
Every package needs /usr/share/doc/$package_name and
DEBIAN directory, so create them as part of create_package
function.

Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
2015-08-19 15:37:39 +02:00
Jim Davis 21a59991ce scripts/package/Makefile: rpmbuild is needed for rpm targets
Before rpm release 4.1, in 2002, either the rpm command or the
rpmbuild command could be used in the rpm-pkg or binrpm-pkg targets,
and the Makefile chose the rpm command if the rpmbuild command wasn't
found.

After release 4.1, however, the rpm command could no longer be used in
place of the rpmbuild command.  As the rpmbuild command is not
installed by default, this can lead to failures with the rpm-pkg and
binrpm-pkg targets:

rpm --define "_builddir ." --target \
    x86_64 -bb ./binkernel.spec
    rpm --target: unknown option
    scripts/package/Makefile:60: recipe for target 'binrpm-pkg' failed

Change the Makefile to use rpmbuild unconditionally to avoid this.

Signed-off-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-06-15 16:08:05 +02:00
Arnaud Patard (Rtp) ca2a9d2cf6 deb-pkg: Add device tree blobs to the package
When building a package with make deb-pkg (say, for arm), the dtb files are
not added to the package. Given that things are still evolving on arm, it
make sense to have them along with the kernel and modules.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-05-20 13:07:54 +08:00
Andrey Skvortsov 64178cb62c builddeb: fix stripped module signatures if CONFIG_DEBUG_INFO and CONFIG_MODULE_SIG_ALL are set
If CONFIG_MODULE_SIG_ALL is set, then user expects that all modules are
automatically signed in the result package, as it's for rpm-pkg, binrpm-pkg,
tar, tar-*. For deb-pkg this is correct only if CONFIG_DEBUG_INFO
is NOT set. In that case deb-package contains signed modules.

But if CONFIG_DEBUG_INFO is set, builddeb creates separate package with
debug information. To do that, debug information from all modules
is copied into separate files by objcopy. And loadable kernel modules are
stripped afterwards. Stripping removes previously (during modules_install)
added signatures from loadable kernel modules. Therefore final deb-package
contains unsigned modules despite of set option CONFIG_MODULE_SIG_ALL.

This patch resigns all stripped modules if CONFIG_MODULE_SIG_ALL is set
to solve this problem.

Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-05-06 15:25:53 +02:00
Riku Voipio dca0c0246f deb-pkg: move setting debarch for a separate function
create_package() function tries to resolve used architecture
for everry package. Split the setting the architecture to a
new function, set_debarch(), called once on startup.

This allows using debarch from other parts of script as
needed.

v2: Follow Michals suggestion on setting variables at
top scope and also setting the fallback $debarch in the
new function

Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-04-27 14:16:35 +02:00
Borislav Petkov 92f43c452c kbuild/mkspec: Simplify vmlinux.bz2 creation
No need for the intermediary vmlinux.orig - bzip2 can keep the original
files used for compression with --keep.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-04-27 14:16:35 +02:00
Sedat Dilek d9f711db83 builddeb: Try to determine distribution
lsb_release command is a good choice to determine the distribution
name for the changelog file in the generated Debian packages [1].
Its installation is no precondition.
In Debian it is still not essential or build-essential.

Ben gave some helpful informations and detailed explanations in [2].
There he also suggested to have an option to explicitly set the
distribution name (see $KDEB_CHANGELOG_DIST variable).

Embedded the improvement as suggested by Thorsten (see [3]):

"This is suboptimal: if KDEB_CHANGELOG_DIST is defined,
lsb_release is not necessary. The following snippet
also omits using its output if it fails but still
produces any:"

Dealing with this issue I learned about "The Colon in the Shell." and
possible pitfalls in this area (see [4,5]). Furthermore, refreshed my
knowledge about redirecting outputs with the echo command (see [5]).
Special thanks to Thorsten, I enjoyed the IRC session with you.

Cooked together the snippets of Ben and Thorsten (see [2,3]).
Tested against Linux v3.19-rc2.

Thanks goes to Alexander, Ben, maximilian and Thorsten for the very
vital help.

[1] https://lkml.org/lkml/2012/4/23/516
[2] http://marc.info/?l=linux-kbuild&m=142022188322321&w=2
[3] http://marc.info/?l=linux-kbuild&m=142023476825460&w=2
[4] http://blog.brlink.eu/index.html#i70
[5] https://www.mirbsd.org/permalinks/wlog-10_e20141209-tg.htm
[6] http://stackoverflow.com/questions/23489934/echo-2-some-text-what-does-it-mean-in-shell-scripting

CC: Alexander Wirt <formorer@debian.org>
Suggested-by: Ben Hutchings <ben@decadent.org.uk>
Suggested-by: Thorsten Glaser <tg@mirbsd.org>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: maximilian attems <max@stro.at>
[ dileks: Reviewed his suggested diff in RFC v4 ]
Reviewed-by: Thorsten Glaser <tg@debian.org>
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-01-06 20:42:46 +01:00
Sedat Dilek 701ca30cc6 builddeb: Update year and git repository URL in debian/copyright
Happy new 2015!

I have combined two patches which I had already sent to linux-kbuild ML.

Today, I prefer "builddeb" as a label for such patches.

[1] http://marc.info/?l=linux-kbuild&m=133521955904706
[2] http://marc.info/?l=linux-kbuild&m=133521955004705

CC: Ben Hutchings <ben@decadent.org.uk>
CC: maximilian attems <max@stro.at>
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2015-01-02 17:05:47 +01:00
Jérôme Glisse b9a544240d scripts/package: binrpm-pkg do not create source and devel package
When doing make binrpm-pkg we only want to build the binary and header
package as the documentation of binrpm-pkg target claims. Hence this
patch avoid building the source and devel package. This makes binrpm-pkg
target lot faster and way more usefull.

Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Michal Marek <mmarek@suse.cz>
[mmarek: used subject line from v3]
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-12-08 13:11:22 +01:00
Linus Torvalds da92da3638 Merge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull misc kbuild updates from Michal Marek:
 "This is the less critical kbuild stuff for v3.18-rc1:

   - make deb-pkg debuginfo fix, ppc64el support and warning fix for
     recent dpkg tools
   - make TAGS fixes
   - new coccinelle patch
   - kbuild documentation improvements"

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  deb-pkg: remove obsolete -isp option to dpkg-gencontrol
  coccinelle: misc: semantic patch to delete overly complex return code processing
  deb-pkg: Add support for powerpc little endian
  builddeb: put the dbg files into the correct directory
  scripts/tags.sh: fix DEFINE_HASHTABLE in emacs case
  scripts/tags.sh: remove *PCGFLAGS regular expressions
  scripts/tags.sh: Don't specify kind-spec for emacs' ctags/etags
  Documentation: kbuild: Improve grammar
  Documentation: kbuild: Remove obsolete dtc_cpp section
  Documentation: kbuild: Improve if_changed documentation
  Documentation: kbuild: Remove obsolete include/asm symlink step
2014-10-14 09:27:48 +02:00
Asbjoern Sloth Toennesen 4204111c02 deb-pkg: remove obsolete -isp option to dpkg-gencontrol
The -isp option has been deprecated, after it became the default
behaviour back in 2006.

Since dpkg 1.17.11, dpkg-gencontrol emits a warning on -isp usage.

References: https://bugs.debian.org/215233
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-10-06 18:02:39 +02:00
Michael Neuling 22739edfc5 deb-pkg: Add support for powerpc little endian
The Debian powerpc little endian architecture is called ppc64el.  This
is the default architecture used by Ubuntu for powerpc.

The below checks the kernel config to see if we are compiling little
endian and sets the Debian arch appropriately.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-09-12 16:10:42 +02:00
Michal Marek 2d08713969 builddeb: put the dbg files into the correct directory
Since the conversion of objtree to use relative pathnames (commit
7e1c04779e, "kbuild: Use relative path for $(objtree)"), the debug
info files have been ending up in /debian/dbgtmp/ in the regular
linux-image package instead of the debug files package. Fix up the
paths so that the debug files end up in the -dbg package.

This is based on a similar patch by Darrick.

Reported-and-tested-by: "Darrick J. Wong" <darrick.wong@oracle.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-08-26 16:01:07 +02:00
Michal Marek 06ed5c2bfa kbuild: Make scripts executable
The Makefiles call the respective interpreter explicitly, but this makes
it easier to use the scripts manually.

Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-08-20 16:03:45 +02:00
Fathi Boudra 8bf13561bc builddeb: fix missing headers in linux-headers package
The kernel headers package (linux-headers) doesn't include several
header files required to build out-of-tree modules.

It makes the package unusable on e.g. ARM architecture:
 /usr/src/linux-headers-3.14.0/arch/arm/include/asm/memory.h:24:25:
 fatal error: mach/memory.h: No such file or directory
 #include <mach/memory.h>
 ^
 compilation terminated.

Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-06-18 21:36:36 +02:00
Michal Marek c7eb3a7a17 kbuild: Fix tar-pkg with relative $(objtree)
Commit 7e1c0477 (kbuild: Use relative path for $(objtree)) assumes that
the build process does not change its working directory. make tar-pkg
was a couterexample, fix this by changing directory only for the tar
command and not for the whole script, which at one point references the
now relative $(objtree).

Reported-and-tested-by: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-06-18 17:34:59 +02:00
Michal Marek a765a7ce29 deb-pkg: Fix for relative paths
When $srctree or $objtree are relative paths, we cannot change directory
and refer to them in the same subshell. Do the redirection outside of
the subshell to fix this.

Reported-and-tested-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-06-18 16:01:58 +02:00
Linus Torvalds c1fdb2d338 Merge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild misc updates from Michal Marek:
 "This is the non-critical part of kbuild for v3.16-rc1:
   - make deb-pkg can do s390x and arm64
   - new patterns in scripts/tags.sh
   - scripts/tags.sh skips userspace tools' sources (which sometimes
     have copies of kernel structures) and symlinks
   - improvements to the objdiff tool
   - two new coccinelle patches
   - other minor fixes"

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  scripts: objdiff: support directories for the augument of record command
  scripts: objdiff: fix a comment
  scripts: objdiff: change the extension of disassembly from .o to .dis
  scripts: objdiff: improve path flexibility for record command
  scripts: objdiff: remove unnecessary code
  scripts: objdiff: direct error messages to stderr
  scripts: objdiff: get the path to .tmp_objdiff more simply
  deb-pkg: Add automatic support for s390x architecture
  coccicheck: Add unneeded return variable test
  kbuild: Fix a typo in documentation
  kbuild: trivial - use tabs for code indent where possible
  kbuild: trivial - remove trailing empty lines
  coccinelle: Check for missing NULL terminators in of_device_id tables
  scripts/tags.sh: ignore symlink'ed source files
  scripts/tags.sh: add regular expression replacement pattern for memcg
  builddeb: add arm64 in the supported architectures
  builddeb: use $OBJCOPY variable instead of objcopy
  scripts/tags.sh: ignore code of user space tools
  scripts/tags.sh: add pattern for DEFINE_HASHTABLE
  .gitignore: ignore Module.symvers in all directories
2014-06-12 21:29:20 -07:00
Ben Hutchings a1323fd163 deb-pkg: Add automatic support for s390x architecture
The Debian s390x architecture has 64-bit userland whereas s390 has
32-bit userland.  A 64-bit kernel can be used with either.  Now that
Debian supports multiarch and officially supports s390x, it makes more
sense to assign a 64-bit kernel package to s390x.

Reported-by: Stephen Powell <zlinuxman@wowway.com>
References: https://bugs.debian.org/750925
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-06-10 14:49:12 +02:00
Masahiro Yamada 7eb6e34052 kbuild: trivial - remove trailing empty lines
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-06-10 00:04:06 +02:00
Masahiro Yamada 38385f8f01 kbuild: trivial - remove trailing spaces
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-04-30 17:34:32 +02:00
Fathi Boudra a8d9c9f1f1 builddeb: add arm64 in the supported architectures
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-04-24 15:27:18 +02:00
Fathi Boudra 6b4a144a92 builddeb: use $OBJCOPY variable instead of objcopy
In cross-build environment, we expect to use the cross-compiler objcopy
instead of the host objcopy.

It fixes following build failures:
objcopy --only-keep-debug lib/modules/3.14/kernel/net/ipv6/xfrm6_mode_tunnel.ko /srv/build/linux/debian/dbgtmp/usr/lib/debug/lib/modules/3.14/kernel/net/ipv6/xfrm6_mode_tunnel.ko
objcopy: Unable to recognise the format of the input file `lib/modules/3.14/kernel/net/ipv6/xfrm6_mode_tunnel.ko'

Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Cc: stable <stable@vger.kernel.org> # 3.12+
Fixes: 810e843746 ('deb-pkg: split debug symbols in their own package')
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-04-24 15:25:09 +02:00
Ben Hutchings c5e318f67e deb-pkg: Fix building for MIPS big-endian or ARM OABI
These commands will mysteriously fail:

$ make ARCH=arm versatile_defconfig
[...]
$ make ARCH=arm deb-pkg
[...]
make[1]: *** [deb-pkg] Error 1
make: *** [deb-pkg] Error 2

The Debian architecture selection for these kernel architectures does
'grep FOO=y $KCONFIG_CONFIG && echo bar', and after 'set -e' this
aborts the script if grep does not find the given config symbol.

Fixes: 10f26fa642 ('build, deb-pkg: select userland architecture based on UTS_MACHINE')
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-01-03 17:28:23 +01:00
Ben Hutchings f8ce239dfc deb-pkg: Fix cross-building linux-headers package
builddeb generates a control file that says the linux-headers package
can only be built for the build system primary architecture.  This
breaks cross-building configurations.  We should use $debarch for this
instead.

Since $debarch is not yet set when generating the control file, set
Architecture: any and use control file variables to fill in the
description.

Fixes: cd8d60a20a ('kbuild: create linux-headers package in deb-pkg')
Reported-and-tested-by: "Niew, Sh." <shniew@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2014-01-03 17:17:38 +01:00
Michal Marek 37e2c2a775 Merge commit v3.13-rc1 into kbuild/misc 2014-01-02 14:02:06 +01:00
Ben Hutchings 1c8ddae09f deb-pkg: Inhibit initramfs builders if CONFIG_BLK_DEV_INITRD is not set
The kernel postinst hook for initramfs-tools will build an initramfs
on installation unless $INITRD is set to 'No'.  make-kpkg generates a
postinst script that sets this variable appropriately, but we don't.
Set it based on CONFIG_BLK_DEV_INITRD.

This should also work with dracut when <http://bugs.debian.org/729622>
is fixed.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-11-18 14:35:49 +01:00