Commit Graph

8 Commits

Author SHA1 Message Date
Vincent Legoll b6aeab44ed ACPI: fix whitespace in pr_fmt() to align log entries
See this dmesg extract before the patch:

[    0.679466] ACPI: Dynamic OEM Table Load:
[    0.679470] ACPI: SSDT 0xFFFF910F6B497E00 00018A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.679579] ACPI: Executed 1 blocks of module-level executable AML code
[    0.681477] ACPI : EC: EC started
[    0.681478] ACPI : EC: interrupt blocked
[    0.684798] ACPI: Interpreter enabled
[    0.684835] ACPI: (supports S0 S3 S4 S5)

Signed-off-by: Vincent Legoll <vincent.legoll@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-22 02:18:20 +02:00
Joerg Roedel e3d5092b67 ACPI: ioapic: Clear on-stack resource before using it
The on-stack resource-window 'win' in setup_res() is not
properly initialized. This causes the pointers in the
embedded 'struct resource' to contain stale addresses.

These pointers (in my case the ->child pointer) later get
propagated to the global iomem_resources list, causing a #GP
exception when the list is traversed in
iomem_map_sanity_check().

Fixes: c183619b63 (x86/irq, ACPI: Implement ACPI driver to support IOAPIC hotplug)
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-03-28 23:31:45 +02:00
Rui Wang f2ae5da726 x86/ioapic: Split IOAPIC hot-removal into two steps
The hot removal of IOAPIC is handling PCI and ACPI removal in one go. That
only works when the PCI drivers released the interrupt resources, but
breaks when a IOAPIC interrupt is still associated to a PCI device.

The new pcibios_release_device() callback allows to solve that problem by
splitting the removal into two steps:

1) PCI removal:

   Release all PCI resources including eventually not yet released IOAPIC
   interrupts via the new pcibios_release_device() callback.

2) ACPI removal:

   After release of all PCI resources the ACPI resources can be released
   without issue.

[ tglx: Rewrote changelog ]

Signed-off-by: Rui Wang <rui.y.wang@intel.com>
Cc: tony.luck@intel.com
Cc: linux-pci@vger.kernel.org
Cc: rjw@rjwysocki.net
Cc: linux-acpi@vger.kernel.org
Cc: fengguang.wu@intel.com
Cc: helgaas@kernel.org
Cc: kbuild-all@01.org
Cc: bhelgaas@google.com
Link: http://lkml.kernel.org/r/1488288869-31290-3-git-send-email-rui.y.wang@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-01 10:51:41 +01:00
Rui Wang 624cad9d29 x86/ioapic: Fix IOAPIC failing to request resource
handle_ioapic_add() uses request_resource() to request ACPI "_CRS"
resources. This can fail with the following error message:

  [  247.325693] ACPI: \_SB_.IIO1.AID1: failed to insert resource

This happens when there are multiple IOAPICs and DSDT groups their
"_CRS" resources as the children of a parent resource, as seen from
/proc/iomem:

  fec00000-fecfffff : PNP0003:00
    fec00000-fec003ff : IOAPIC 0
    fec01000-fec013ff : IOAPIC 1
    fec40000-fec403ff : IOAPIC 2

In this case request_resource() fails because there's a conflicting
resource which is the parent (fec0000-fecfffff). Fix it by using
insert_resource() which can request resources by taking the conflicting
resource as the parent.

Signed-off-by: Rui Wang <rui.y.wang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bhelgaas@google.com
Cc: helgaas@kernel.org
Cc: linux-acpi@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: rjw@rjwysocki.net
Cc: tony.luck@intel.com
Link: http://lkml.kernel.org/r/1471420837-31003-6-git-send-email-rui.y.wang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18 11:45:19 +02:00
Rui Wang 162b83bd5f x86/ioapic: Fix lost IOAPIC resource after hot-removal and hotadd
IOAPIC resource at 0xfecxxxxx gets lost from /proc/iomem after
hot-removing and then hot-adding the IOAPIC device.

After system boot, in /proc/iomem:

 fec00000-fecfffff : PNP0003:00
   fec00000-fec003ff : IOAPIC 0
   fec01000-fec013ff : IOAPIC 1
   fec40000-fec403ff : IOAPIC 2
   fec80000-fec803ff : IOAPIC 3
   fecc0000-fecc03ff : IOAPIC 4

Then hot-remove IOAPIC 2 and hot-add it again:

 fec00000-fecfffff : PNP0003:00
   fec00000-fec003ff : IOAPIC 0
   fec01000-fec013ff : IOAPIC 1
   fec80000-fec803ff : IOAPIC 3
   fecc0000-fecc03ff : IOAPIC 4

The range at 0xfec40000 is lost from /proc/iomem - which is a bug.

This bug happens because handle_ioapic_add() requests resources from
either PCI config BAR or ACPI "_CRS", not both. But Intel platforms
map the IOxAPIC registers both at the PCI config BAR (called MBAR, dynamic),
and at the ACPI "_CRS" (called ABAR, static). The 0xfecX_YZ00 to 0xfecX_YZFF
range appears in "_CRS" of each IOAPIC device.

Both ranges should be claimed from /proc/iomem for exclusive use.

Signed-off-by: Rui Wang <rui.y.wang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bhelgaas@google.com
Cc: helgaas@kernel.org
Cc: linux-acpi@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: rjw@rjwysocki.net
Cc: tony.luck@intel.com
Link: http://lkml.kernel.org/r/1471420837-31003-5-git-send-email-rui.y.wang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18 11:45:18 +02:00
Rui Wang 6ab7eba5db x86/ioapic: Fix setup_res() failing to get resource
acpi_dev_filter_resource_type() returns 0 on success, and 1 on failure.
A return value of zero means there's a matching resource, so we should
continue within setup_res() to get the resource.

Signed-off-by: Rui Wang <rui.y.wang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bhelgaas@google.com
Cc: helgaas@kernel.org
Cc: linux-acpi@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: rjw@rjwysocki.net
Cc: tony.luck@intel.com
Link: http://lkml.kernel.org/r/1471420837-31003-4-git-send-email-rui.y.wang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18 11:45:18 +02:00
Rui Wang fe7bd58f5d x86/ioapic: Change prototype of acpi_ioapic_add()
Change the argument of acpi_ioapic_add() to a generic ACPI handle, and
move its prototype from drivers/acpi/internal.h to include/linux/acpi.h
so that it can be called from outside the pci_root driver.

Signed-off-by: Rui Wang <rui.y.wang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bhelgaas@google.com
Cc: helgaas@kernel.org
Cc: linux-acpi@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: rjw@rjwysocki.net
Cc: tony.luck@intel.com
Link: http://lkml.kernel.org/r/1471420837-31003-2-git-send-email-rui.y.wang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18 11:45:18 +02:00
Jiang Liu c183619b63 x86/irq, ACPI: Implement ACPI driver to support IOAPIC hotplug
Enable support of IOAPIC hotplug by:
1) reintroducing ACPI based IOAPIC driver
2) enhance pci_root driver to hook hotplug events

The ACPI IOAPIC driver is always enabled if all of ACPI, PCI and IOAPIC
are enabled.

Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Len Brown <lenb@kernel.org>
Link: http://lkml.kernel.org/r/1414387308-27148-19-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-05 15:09:26 +01:00