Commit Graph

346 Commits

Author SHA1 Message Date
Ard Biesheuvel 944585a64f crypto: x86/aes-ni - remove special handling of AES in PCBC mode
For historical reasons, the AES-NI based implementation of the PCBC
chaining mode uses a special FPU chaining mode wrapper template to
amortize the FPU start/stop overhead over multiple blocks.

When this FPU wrapper was introduced, it supported widely used
chaining modes such as XTS and CTR (as well as LRW), but currently,
PCBC is the only remaining user.

Since there are no known users of pcbc(aes) in the kernel, let's remove
this special driver, and rely on the generic pcbc driver to encapsulate
the AES-NI core cipher.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-10-05 10:16:56 +08:00
Gilad Ben-Yossef e497c51896 crypto: ofb - add output feedback mode
Add a generic version of output feedback mode. We already have support of
several hardware based transformations of this mode and the needed test
vectors but we somehow missed adding a generic software one. Fix this now.

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-09-28 12:46:26 +08:00
Corentin Labbe cac5818c25 crypto: user - Implement a generic crypto statistics
This patch implement a generic way to get statistics about all crypto
usages.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-09-28 12:46:25 +08:00
Ard Biesheuvel ab8085c130 crypto: x86 - remove SHA multibuffer routines and mcryptd
As it turns out, the AVX2 multibuffer SHA routines are currently
broken [0], in a way that would have likely been noticed if this
code were in wide use. Since the code is too complicated to be
maintained by anyone except the original authors, and since the
performance benefits for real-world use cases are debatable to
begin with, it is better to drop it entirely for the moment.

[0] https://marc.info/?l=linux-crypto-vger&m=153476243825350&w=2

Suggested-by: Eric Biggers <ebiggers@google.com>
Cc: Megha Dey <megha.dey@linux.intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-09-04 11:37:04 +08:00
Jason A. Donenfeld 578bdaabd0 crypto: speck - remove Speck
These are unused, undesired, and have never actually been used by
anybody. The original authors of this code have changed their mind about
its inclusion. While originally proposed for disk encryption on low-end
devices, the idea was discarded [1] in favor of something else before
that could really get going. Therefore, this patch removes Speck.

[1] https://marc.info/?l=linux-crypto-vger&m=153359499015659

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Cc: stable@vger.kernel.org
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-09-04 11:35:03 +08:00
Eric Biggers b7b73cd5d7 crypto: x86/salsa20 - remove x86 salsa20 implementations
The x86 assembly implementations of Salsa20 use the frame base pointer
register (%ebp or %rbp), which breaks frame pointer convention and
breaks stack traces when unwinding from an interrupt in the crypto code.
Recent (v4.10+) kernels will warn about this, e.g.

WARNING: kernel stack regs at 00000000a8291e69 in syzkaller047086:4677 has bad 'bp' value 000000001077994c
[...]

But after looking into it, I believe there's very little reason to still
retain the x86 Salsa20 code.  First, these are *not* vectorized
(SSE2/SSSE3/AVX2) implementations, which would be needed to get anywhere
close to the best Salsa20 performance on any remotely modern x86
processor; they're just regular x86 assembly.  Second, it's still
unclear that anyone is actually using the kernel's Salsa20 at all,
especially given that now ChaCha20 is supported too, and with much more
efficient SSSE3 and AVX2 implementations.  Finally, in benchmarks I did
on both Intel and AMD processors with both gcc 8.1.0 and gcc 4.9.4, the
x86_64 salsa20-asm is actually slightly *slower* than salsa20-generic
(~3% slower on Skylake, ~10% slower on Zen), while the i686 salsa20-asm
is only slightly faster than salsa20-generic (~15% faster on Skylake,
~20% faster on Zen).  The gcc version made little difference.

So, the x86_64 salsa20-asm is pretty clearly useless.  That leaves just
the i686 salsa20-asm, which based on my tests provides a 15-20% speed
boost.  But that's without updating the code to not use %ebp.  And given
the maintenance cost, the small speed difference vs. salsa20-generic,
the fact that few people still use i686 kernels, the doubt that anyone
is even using the kernel's Salsa20 at all, and the fact that a SSE2
implementation would almost certainly be much faster on any remotely
modern x86 processor yet no one has cared enough to add one yet, I don't
think it's worthwhile to keep.

Thus, just remove both the x86_64 and i686 salsa20-asm implementations.

Reported-by: syzbot+ffa3a158337bbc01ff09@syzkaller.appspotmail.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-31 00:13:57 +08:00
Ondrej Mosnacek 2808f17319 crypto: morus - Mark MORUS SIMD glue as x86-specific
Commit 56e8e57fc3 ("crypto: morus - Add common SIMD glue code for
MORUS") accidetally consiedered the glue code to be usable by different
architectures, but it seems to be only usable on x86.

This patch moves it under arch/x86/crypto and adds 'depends on X86' to
the Kconfig options and also removes the prompt to hide these internal
options from the user.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-31 00:13:41 +08:00
Ondrej Mosnacek 6ecc9d9ff9 crypto: x86 - Add optimized MORUS implementations
This patch adds optimized implementations of MORUS-640 and MORUS-1280,
utilizing the SSE2 and AVX2 x86 extensions.

For MORUS-1280 (which operates on 256-bit blocks) we provide both AVX2
and SSE2 implementation. Although SSE2 MORUS-1280 is slower than AVX2
MORUS-1280, it is comparable in speed to the SSE2 MORUS-640.

Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-19 00:15:35 +08:00
Ondrej Mosnacek 56e8e57fc3 crypto: morus - Add common SIMD glue code for MORUS
This patch adds a common glue code for optimized implementations of
MORUS AEAD algorithms.

Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-19 00:15:18 +08:00
Ondrej Mosnacek 396be41f16 crypto: morus - Add generic MORUS AEAD implementations
This patch adds the generic implementation of the MORUS family of AEAD
algorithms (MORUS-640 and MORUS-1280). The original authors of MORUS
are Hongjun Wu and Tao Huang.

At the time of writing, MORUS is one of the finalists in CAESAR, an
open competition intended to select a portfolio of alternatives to
the problematic AES-GCM:

https://competitions.cr.yp.to/caesar-submissions.html
https://competitions.cr.yp.to/round3/morusv2.pdf

Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-19 00:15:00 +08:00
Ondrej Mosnacek 1d373d4e8e crypto: x86 - Add optimized AEGIS implementations
This patch adds optimized implementations of AEGIS-128, AEGIS-128L,
and AEGIS-256, utilizing the AES-NI and SSE2 x86 extensions.

Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-19 00:14:00 +08:00
Ondrej Mosnacek f606a88e58 crypto: aegis - Add generic AEGIS AEAD implementations
This patch adds the generic implementation of the AEGIS family of AEAD
algorithms (AEGIS-128, AEGIS-128L, and AEGIS-256). The original
authors of AEGIS are Hongjun Wu and Bart Preneel.

At the time of writing, AEGIS is one of the finalists in CAESAR, an
open competition intended to select a portfolio of alternatives to
the problematic AES-GCM:

https://competitions.cr.yp.to/caesar-submissions.html
https://competitions.cr.yp.to/round3/aegisv11.pdf

Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-19 00:13:58 +08:00
Nick Terrell d28fc3dbe1 crypto: zstd - Add zstd support
Adds zstd support to crypto and scompress. Only supports the default
level.

Previously we held off on this patch, since there weren't any users.
Now zram is ready for zstd support, but depends on CONFIG_CRYPTO_ZSTD,
which isn't defined until this patch is in. I also see a patch adding
zstd to pstore [0], which depends on crypto zstd.

[0] lkml.kernel.org/r/9c9416b2dff19f05fb4c35879aaa83d11ff72c92.1521626182.git.geliangtang@gmail.com

Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-04-21 00:58:30 +08:00
Linus Torvalds 948869fa9f MIPS changes for 4.17
These are the main MIPS changes for 4.17. Rough overview:
 
  (1) generic platform: Add support for Microsemi Ocelot SoCs
 
  (2) crypto: Add CRC32 and CRC32C HW acceleration module
 
  (3) Various cleanups and misc improvements
 
 Miscellaneous:
 
  - Hang more efficiently on halt/powerdown/restart
 
  - pm-cps: Block system suspend when a JTAG probe is present
 
  - Expand make help text for generic defconfigs
    - Refactor handling of legacy defconfigs
 
  - Determine the entry point from the ELF file header to fix microMIPS
    for certain toolchains
 
  - Introduce isa-rev.h for MIPS_ISA_REV and use to simplify other code
 
 Minor cleanups:
 
  - DTS: boston/ci20: Unit name cleanups and correction
 
  - kdump: Make the default for PHYSICAL_START always 64-bit
 
  - Constify gpio_led in Alchemy, AR7, and TXX9
 
  - Silence a couple of W=1 warnings
 
  - Remove duplicate includes
 
 Platform support:
 
 ath79:
 
  - Fix AR724X_PLL_REG_PCIE_CONFIG offset
 
 BCM47xx:
 
  - FIRMWARE: Use mac_pton() for MAC address parsing
 
  - Add Luxul XAP1500/XWR1750 WiFi LEDs
 
  - Use standard reset button for Luxul XWR-1750
 
 BMIPS:
 
  - Enable CONFIG_BRCMSTB_PM in bmips_stb_defconfig for build coverage
 
  - Add STB PM, wake-up timer, watchdog DT nodes
 
 Generic platform:
 
  - Add support for Microsemi Ocelot
    - dt-bindings: Add vendor prefix for Microsemi Corporation
    - dt-bindings: Add bindings for Microsemi SoCs
    - Add ocelot SoC & PCB123 board DTS files
    - MAINTAINERS: Add entry for Microsemi MIPS SoCs
 
  - Enable crc32-mips on r6 configs
 
 Octeon:
 
  - Drop '.' after newlines in printk calls
 
 ralink:
 
  - pci-mt7621: Enable PCIe on MT7688
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEd80NauSabkiESfLYbAtpk944dnoFAlrL1tMACgkQbAtpk944
 dnpkhg//UnKOmj4xiQf5ik4XjSDHo2dcUzQKPLq/grzpc9yC2I6bgJ32gcQnD/rw
 x2f64DAjmbIJEY/hCGLEOH82/SqU5vF5gI+BtSKE6Ti28dyQH68pvyHRYIZBFx62
 WRYAf50Spa/q/bOJYv4/eTqjEc7FPMaUll3kH5NMiBB3X5bIeq3w+x78YBKjAqPB
 IJgHF/JnlpD8UvQ0RCl1fIXhkRYeNuTyiAseVI3ygAqbMFMGkTevePWl82D+pWuo
 W9BFaliNt/9TNgq5/L91a/uhSuo6INRls1tFQT9cPa6n4GJxLpUtO7a3v4Xgaukj
 TeXTkXZl4PEUfeTA3cVaXrENTN4sCwThkxvrKwefbUBiIa+/TDi/Wgxi3n+rKwi2
 Vu4V36uxnO/vNU7Sgp/jHdRJyxw06GfRy55MvToFlk1S25Gwt6zW2O0o8nAHwCDW
 zvoRfSkasElKwnM3zKR/mrdDn7qPulFfiyWyKuuY3bIXsaTnItO1JJ/rbgKuIXr7
 lo0eVZ7GhuWfuLCEHZ99rWsGz0SjuQQIb4c6faNELp6gTwIpz9bbsOHRuajvfoSF
 8jmPjUocbaRR0odyFBqsejwBmeebDoeIZljzD50ImSoYftEMgRoQ448mIm0EuWVU
 KY+85MIeK5zwWXKd4VBexgLvPggGURaOEEXKisgvoE3NjCuO2nw=
 =4vUc
 -----END PGP SIGNATURE-----

Merge tag 'mips_4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips

Pull MIPS updates from James Hogan:
 "These are the main MIPS changes for 4.17. Rough overview:

   (1) generic platform: Add support for Microsemi Ocelot SoCs

   (2) crypto: Add CRC32 and CRC32C HW acceleration module

   (3) Various cleanups and misc improvements

  More detailed summary:

  Miscellaneous:
   - hang more efficiently on halt/powerdown/restart
   - pm-cps: Block system suspend when a JTAG probe is present
   - expand make help text for generic defconfigs
   - refactor handling of legacy defconfigs
   - determine the entry point from the ELF file header to fix microMIPS
     for certain toolchains
   - introduce isa-rev.h for MIPS_ISA_REV and use to simplify other code

  Minor cleanups:
   - DTS: boston/ci20: Unit name cleanups and correction
   - kdump: Make the default for PHYSICAL_START always 64-bit
   - constify gpio_led in Alchemy, AR7, and TXX9
   - silence a couple of W=1 warnings
   - remove duplicate includes

  Platform support:
  Generic platform:
   - add support for Microsemi Ocelot
   - dt-bindings: Add vendor prefix for Microsemi Corporation
   - dt-bindings: Add bindings for Microsemi SoCs
   - add ocelot SoC & PCB123 board DTS files
   - MAINTAINERS: Add entry for Microsemi MIPS SoCs
   - enable crc32-mips on r6 configs

  ath79:
   - fix AR724X_PLL_REG_PCIE_CONFIG offset

  BCM47xx:
   - firmware: Use mac_pton() for MAC address parsing
   - add Luxul XAP1500/XWR1750 WiFi LEDs
   - use standard reset button for Luxul XWR-1750

  BMIPS:
   - enable CONFIG_BRCMSTB_PM in bmips_stb_defconfig for build coverage
   - add STB PM, wake-up timer, watchdog DT nodes

  Octeon:
   - drop '.' after newlines in printk calls

  ralink:
   - pci-mt7621: Enable PCIe on MT7688"

* tag 'mips_4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (37 commits)
  MIPS: BCM47XX: Use standard reset button for Luxul XWR-1750
  MIPS: BCM47XX: Add Luxul XAP1500/XWR1750 WiFi LEDs
  MIPS: Make the default for PHYSICAL_START always 64-bit
  MIPS: Use the entry point from the ELF file header
  MAINTAINERS: Add entry for Microsemi MIPS SoCs
  MIPS: generic: Add support for Microsemi Ocelot
  MIPS: mscc: Add ocelot PCB123 device tree
  MIPS: mscc: Add ocelot dtsi
  dt-bindings: mips: Add bindings for Microsemi SoCs
  dt-bindings: Add vendor prefix for Microsemi Corporation
  MIPS: ath79: Fix AR724X_PLL_REG_PCIE_CONFIG offset
  MIPS: pci-mt7620: Enable PCIe on MT7688
  MIPS: pm-cps: Block system suspend when a JTAG probe is present
  MIPS: VDSO: Replace __mips_isa_rev with MIPS_ISA_REV
  MIPS: BPF: Replace __mips_isa_rev with MIPS_ISA_REV
  MIPS: cpu-features.h: Replace __mips_isa_rev with MIPS_ISA_REV
  MIPS: Introduce isa-rev.h to define MIPS_ISA_REV
  MIPS: Hang more efficiently on halt/powerdown/restart
  FIRMWARE: bcm47xx_nvram: Replace mac address parsing
  MIPS: BMIPS: Add Broadcom STB watchdog nodes
  ...
2018-04-10 11:39:22 -07:00
Gilad Ben-Yossef 747c8ce4e7 crypto: sm4 - introduce SM4 symmetric cipher algorithm
Introduce the SM4 cipher algorithms (OSCCA GB/T 32907-2016).

SM4 (GBT.32907-2016) is a cryptographic standard issued by the
Organization of State Commercial Administration of China (OSCCA)
as an authorized cryptographic algorithms for the use within China.

SMS4 was originally created for use in protecting wireless
networks, and is mandated in the Chinese National Standard for
Wireless LAN WAPI (Wired Authentication and Privacy Infrastructure)
(GB.15629.11-2003).

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-16 23:35:48 +08:00
James Bottomley a7d85e06ed crypto: cfb - add support for Cipher FeedBack mode
TPM security routines require encryption and decryption with AES in
CFB mode, so add it to the Linux Crypto schemes.  CFB is basically a
one time pad where the pad is generated initially from the encrypted
IV and then subsequently from the encrypted previous block of
ciphertext.  The pad is XOR'd into the plain text to get the final
ciphertext.

https://en.wikipedia.org/wiki/Block_cipher_mode_of_operation#CFB

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-09 22:45:49 +08:00
Eric Biggers 0e145b477d crypto: ablk_helper - remove ablk_helper
All users of ablk_helper have been converted over to crypto_simd, so
remove ablk_helper.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-03 00:03:38 +08:00
Eric Biggers 44893bc296 crypto: x86/camellia-aesni-avx, avx2 - convert to skcipher interface
Convert the AESNI AVX and AESNI AVX2 implementations of Camellia from
the (deprecated) ablkcipher and blkcipher interfaces over to the
skcipher interface.  Note that this includes replacing the use of
ablk_helper with crypto_simd.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-03 00:03:32 +08:00
Eric Biggers 1af6d03710 crypto: x86/camellia - convert to skcipher interface
Convert the x86 asm implementation of Camellia from the (deprecated)
blkcipher interface over to the skcipher interface.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-03 00:03:32 +08:00
Eric Biggers 451cc49324 crypto: x86/camellia - remove XTS algorithm
The XTS template now wraps an ECB mode algorithm rather than the block
cipher directly.  Therefore it is now redundant for crypto modules to
wrap their ECB code with generic XTS code themselves via xts_crypt().

Remove the xts-camellia-asm algorithm which did this.  Users who request
xts(camellia) and previously would have gotten xts-camellia-asm will now
get xts(ecb-camellia-asm) instead, which is just as fast.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-03 00:03:32 +08:00
Eric Biggers 6043d341f0 crypto: x86/camellia - remove LRW algorithm
The LRW template now wraps an ECB mode algorithm rather than the block
cipher directly.  Therefore it is now redundant for crypto modules to
wrap their ECB code with generic LRW code themselves via lrw_crypt().

Remove the lrw-camellia-asm algorithm which did this.  Users who request
lrw(camellia) and previously would have gotten lrw-camellia-asm will now
get lrw(ecb-camellia-asm) instead, which is just as fast.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-03 00:03:31 +08:00
Eric Biggers 44c9b75409 crypto: x86/camellia-aesni-avx2 - remove LRW algorithm
The LRW template now wraps an ECB mode algorithm rather than the block
cipher directly.  Therefore it is now redundant for crypto modules to
wrap their ECB code with generic LRW code themselves via lrw_crypt().

Remove the lrw-camellia-aesni-avx2 algorithm which did this.  Users who
request lrw(camellia) and previously would have gotten
lrw-camellia-aesni-avx2 will now get lrw(ecb-camellia-aesni-avx2)
instead, which is just as fast.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-03 00:03:31 +08:00
Eric Biggers 6fcb81b562 crypto: x86/camellia-aesni-avx - remove LRW algorithm
The LRW template now wraps an ECB mode algorithm rather than the block
cipher directly.  Therefore it is now redundant for crypto modules to
wrap their ECB code with generic LRW code themselves via lrw_crypt().

Remove the lrw-camellia-aesni algorithm which did this.  Users who
request lrw(camellia) and previously would have gotten
lrw-camellia-aesni will now get lrw(ecb-camellia-aesni) instead, which
is just as fast.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-03 00:03:30 +08:00
Eric Biggers 09c0f03bf8 crypto: x86/des3_ede - convert to skcipher interface
Convert the x86 asm implementation of Triple DES from the (deprecated)
blkcipher interface over to the skcipher interface.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-03 00:03:30 +08:00
Eric Biggers c1679171c6 crypto: x86/blowfish: convert to skcipher interface
Convert the x86 asm implementation of Blowfish from the (deprecated)
blkcipher interface over to the skcipher interface.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-03 00:03:29 +08:00
Eric Biggers 4bd9692431 crypto: x86/cast6-avx - convert to skcipher interface
Convert the AVX implementation of CAST6 from the (deprecated) ablkcipher
and blkcipher interfaces over to the skcipher interface.  Note that this
includes replacing the use of ablk_helper with crypto_simd.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-03 00:03:28 +08:00
Eric Biggers f51a1fa439 crypto: x86/cast6-avx - remove LRW algorithm
The LRW template now wraps an ECB mode algorithm rather than the block
cipher directly.  Therefore it is now redundant for crypto modules to
wrap their ECB code with generic LRW code themselves via lrw_crypt().

Remove the lrw-cast6-avx algorithm which did this.  Users who request
lrw(cast6) and previously would have gotten lrw-cast6-avx will now get
lrw(ecb-cast6-avx) instead, which is just as fast.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-03 00:03:27 +08:00
Eric Biggers 1e63183a20 crypto: x86/cast5-avx - convert to skcipher interface
Convert the AVX implementation of CAST5 from the (deprecated) ablkcipher
and blkcipher interfaces over to the skcipher interface.  Note that this
includes replacing the use of ablk_helper with crypto_simd.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-03 00:03:26 +08:00
Eric Biggers 0e6ab46dad crypto: x86/twofish-avx - convert to skcipher interface
Convert the AVX implementation of Twofish from the (deprecated)
ablkcipher and blkcipher interfaces over to the skcipher interface.
Note that this includes replacing the use of ablk_helper with
crypto_simd.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-03 00:03:25 +08:00
Eric Biggers 876e9f0c12 crypto: x86/twofish-avx - remove LRW algorithm
The LRW template now wraps an ECB mode algorithm rather than the block
cipher directly.  Therefore it is now redundant for crypto modules to
wrap their ECB code with generic LRW code themselves via lrw_crypt().

Remove the lrw-twofish-avx algorithm which did this.  Users who request
lrw(twofish) and previously would have gotten lrw-twofish-avx will now
get lrw(ecb-twofish-avx) instead, which is just as fast.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-03 00:03:25 +08:00
Eric Biggers 37992fa47f crypto: x86/twofish-3way - convert to skcipher interface
Convert the 3-way implementation of Twofish from the (deprecated)
blkcipher interface over to the skcipher interface.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-03 00:03:24 +08:00
Eric Biggers ebeea983dd crypto: x86/twofish-3way - remove XTS algorithm
The XTS template now wraps an ECB mode algorithm rather than the block
cipher directly.  Therefore it is now redundant for crypto modules to
wrap their ECB code with generic XTS code themselves via xts_crypt().

Remove the xts-twofish-3way algorithm which did this.  Users who request
xts(twofish) and previously would have gotten xts-twofish-3way will now
get xts(ecb-twofish-3way) instead, which is just as fast.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-03 00:03:24 +08:00
Eric Biggers 68bfc4924b crypto: x86/twofish-3way - remove LRW algorithm
The LRW template now wraps an ECB mode algorithm rather than the block
cipher directly.  Therefore it is now redundant for crypto modules to
wrap their ECB code with generic LRW code themselves via lrw_crypt().

Remove the lrw-twofish-3way algorithm which did this.  Users who request
lrw(twofish) and previously would have gotten lrw-twofish-3way will now
get lrw(ecb-twofish-3way) instead, which is just as fast.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-03 00:03:23 +08:00
Eric Biggers e16bf974b3 crypto: x86/serpent-avx,avx2 - convert to skcipher interface
Convert the AVX and AVX2 implementations of Serpent from the
(deprecated) ablkcipher and blkcipher interfaces over to the skcipher
interface.  Note that this includes replacing the use of ablk_helper
with crypto_simd.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-03 00:03:22 +08:00
Eric Biggers 340b830326 crypto: x86/serpent-avx - remove LRW algorithm
The LRW template now wraps an ECB mode algorithm rather than the block
cipher directly.  Therefore it is now redundant for crypto modules to
wrap their ECB code with generic LRW code themselves via lrw_crypt().

Remove the lrw-serpent-avx algorithm which did this.  Users who request
lrw(serpent) and previously would have gotten lrw-serpent-avx will now
get lrw(ecb-serpent-avx) instead, which is just as fast.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-03 00:03:21 +08:00
Eric Biggers e5f382e643 crypto: x86/serpent-avx2 - remove LRW algorithm
The LRW template now wraps an ECB mode algorithm rather than the block
cipher directly.  Therefore it is now redundant for crypto modules to
wrap their ECB code with generic LRW code themselves via lrw_crypt().

Remove the lrw-serpent-avx2 algorithm which did this.  Users who request
lrw(serpent) and previously would have gotten lrw-serpent-avx2 will now
get lrw(ecb-serpent-avx2) instead, which is just as fast.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-03 00:03:20 +08:00
Eric Biggers e0f409dcb8 crypto: x86/serpent-sse2 - convert to skcipher interface
Convert the SSE2 implementation of Serpent from the (deprecated)
ablkcipher and blkcipher interfaces over to the skcipher interface.
Note that this includes replacing the use of ablk_helper with
crypto_simd.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-03 00:03:20 +08:00
Eric Biggers 8bab4e3cd5 crypto: x86/serpent-sse2 - remove XTS algorithm
The XTS template now wraps an ECB mode algorithm rather than the block
cipher directly.  Therefore it is now redundant for crypto modules to
wrap their ECB code with generic XTS code themselves via xts_crypt().

Remove the xts-serpent-sse2 algorithm which did this.  Users who request
xts(serpent) and previously would have gotten xts-serpent-sse2 will now
get xts(ecb-serpent-sse2) instead, which is just as fast.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-03 00:03:19 +08:00
Eric Biggers 2a05cfc35f crypto: x86/serpent-sse2 - remove LRW algorithm
The LRW template now wraps an ECB mode algorithm rather than the block
cipher directly.  Therefore it is now redundant for crypto modules to
wrap their ECB code with generic LRW code themselves via lrw_crypt().

Remove the lrw-serpent-sse2 algorithm which did this.  Users who request
lrw(serpent) and previously would have gotten lrw-serpent-sse2 will now
get lrw(ecb-serpent-sse2) instead, which is just as fast.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-03 00:03:19 +08:00
Eric Biggers da7a0ab5b4 crypto: speck - add support for the Speck block cipher
Add a generic implementation of Speck, including the Speck128 and
Speck64 variants.  Speck is a lightweight block cipher that can be much
faster than AES on processors that don't have AES instructions.

We are planning to offer Speck-XTS (probably Speck128/256-XTS) as an
option for dm-crypt and fscrypt on Android, for low-end mobile devices
with older CPUs such as ARMv7 which don't have the Cryptography
Extensions.  Currently, such devices are unencrypted because AES is not
fast enough, even when the NEON bit-sliced implementation of AES is
used.  Other AES alternatives such as Twofish, Threefish, Camellia,
CAST6, and Serpent aren't fast enough either; it seems that only a
modern ARX cipher can provide sufficient performance on these devices.

This is a replacement for our original proposal
(https://patchwork.kernel.org/patch/10101451/) which was to offer
ChaCha20 for these devices.  However, the use of a stream cipher for
disk/file encryption with no space to store nonces would have been much
more insecure than we thought initially, given that it would be used on
top of flash storage as well as potentially on top of F2FS, neither of
which is guaranteed to overwrite data in-place.

Speck has been somewhat controversial due to its origin.  Nevertheless,
it has a straightforward design (it's an ARX cipher), and it appears to
be the leading software-optimized lightweight block cipher currently,
with the most cryptanalysis.  It's also easy to implement without side
channels, unlike AES.  Moreover, we only intend Speck to be used when
the status quo is no encryption, due to AES not being fast enough.

We've also considered a novel length-preserving encryption mode based on
ChaCha20 and Poly1305.  While theoretically attractive, such a mode
would be a brand new crypto construction and would be more complicated
and difficult to implement efficiently in comparison to Speck-XTS.

There is confusion about the byte and word orders of Speck, since the
original paper doesn't specify them.  But we have implemented it using
the orders the authors recommended in a correspondence with them.  The
test vectors are taken from the original paper but were mapped to byte
arrays using the recommended byte and word orders.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-02-22 22:16:53 +08:00
Marcin Nowakowski 4a5dc51e93
MIPS: crypto: Add crc32 and crc32c hw accelerated module
This module registers crc32 and crc32c algorithms that use the
optional CRC32[bhwd] and CRC32C[bhwd] instructions in MIPSr6 cores.

Signed-off-by: Marcin Nowakowski <marcin.nowakowski@mips.com>
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-mips@linux-mips.org
Cc: linux-crypto@vger.kernel.org
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Patchwork: https://patchwork.linux-mips.org/patch/18601/
[jhogan@kernel.org: Add CRYPTO_ALG_OPTIONAL_KEY flag on Eric Biggers'
 suggestion, due to commit a208fa8f33 ("crypto: hash - annotate
 algorithms taking optional key") in v4.16-rc1]
2018-02-19 20:50:36 +00:00
Linus Torvalds a103950e0d Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
 "API:
   - Enforce the setting of keys for keyed aead/hash/skcipher
     algorithms.
   - Add multibuf speed tests in tcrypt.

  Algorithms:
   - Improve performance of sha3-generic.
   - Add native sha512 support on arm64.
   - Add v8.2 Crypto Extentions version of sha3/sm3 on arm64.
   - Avoid hmac nesting by requiring underlying algorithm to be unkeyed.
   - Add cryptd_max_cpu_qlen module parameter to cryptd.

  Drivers:
   - Add support for EIP97 engine in inside-secure.
   - Add inline IPsec support to chelsio.
   - Add RevB core support to crypto4xx.
   - Fix AEAD ICV check in crypto4xx.
   - Add stm32 crypto driver.
   - Add support for BCM63xx platforms in bcm2835 and remove bcm63xx.
   - Add Derived Key Protocol (DKP) support in caam.
   - Add Samsung Exynos True RNG driver.
   - Add support for Exynos5250+ SoCs in exynos PRNG driver"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (166 commits)
  crypto: picoxcell - Fix error handling in spacc_probe()
  crypto: arm64/sha512 - fix/improve new v8.2 Crypto Extensions code
  crypto: arm64/sm3 - new v8.2 Crypto Extensions implementation
  crypto: arm64/sha3 - new v8.2 Crypto Extensions implementation
  crypto: testmgr - add new testcases for sha3
  crypto: sha3-generic - export init/update/final routines
  crypto: sha3-generic - simplify code
  crypto: sha3-generic - rewrite KECCAK transform to help the compiler optimize
  crypto: sha3-generic - fixes for alignment and big endian operation
  crypto: aesni - handle zero length dst buffer
  crypto: artpec6 - remove select on non-existing CRYPTO_SHA384
  hwrng: bcm2835 - Remove redundant dev_err call in bcm2835_rng_probe()
  crypto: stm32 - remove redundant dev_err call in stm32_cryp_probe()
  crypto: axis - remove unnecessary platform_get_resource() error check
  crypto: testmgr - test misuse of result in ahash
  crypto: inside-secure - make function safexcel_try_push_requests static
  crypto: aes-generic - fix aes-generic regression on powerpc
  crypto: chelsio - Fix indentation warning
  crypto: arm64/sha1-ce - get rid of literal pool
  crypto: arm64/sha2-ce - move the round constant table to .rodata section
  ...
2018-01-31 14:22:45 -08:00
Eric Biggers c9a3ff8f22 crypto: x86/salsa20 - cleanup and convert to skcipher API
Convert salsa20-asm from the deprecated "blkcipher" API to the
"skcipher" API, in the process fixing it up to use the generic helpers.
This allows removing the salsa20_keysetup() and salsa20_ivsetup()
assembly functions, which aren't performance critical; the C versions do
just fine.

This also fixes the same bug that salsa20-generic had, where the state
array was being maintained directly in the transform context rather than
on the stack or in the request context.  Thus, if multiple threads used
the same Salsa20 transform concurrently they produced the wrong results.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-12 23:03:43 +11:00
Bart Van Assche 8cd579d279 crypto: scompress - use sgl_alloc() and sgl_free()
Use the sgl_alloc() and sgl_free() functions instead of open coding
these functions.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-06 09:18:00 -07:00
Hauke Mehrtens b5b9007730 crypto: ecdh - fix typo in KPP dependency of CRYPTO_ECDH
This fixes a typo in the CRYPTO_KPP dependency of CRYPTO_ECDH.

Fixes: 3c4b23901a ("crypto: ecdh - Add ECDH software support")
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-12-11 22:36:56 +11:00
Linus Torvalds 37dc79565c Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
 "Here is the crypto update for 4.15:

  API:

   - Disambiguate EBUSY when queueing crypto request by adding ENOSPC.
     This change touches code outside the crypto API.
   - Reset settings when empty string is written to rng_current.

  Algorithms:

   - Add OSCCA SM3 secure hash.

  Drivers:

   - Remove old mv_cesa driver (replaced by marvell/cesa).
   - Enable rfc3686/ecb/cfb/ofb AES in crypto4xx.
   - Add ccm/gcm AES in crypto4xx.
   - Add support for BCM7278 in iproc-rng200.
   - Add hash support on Exynos in s5p-sss.
   - Fix fallback-induced error in vmx.
   - Fix output IV in atmel-aes.
   - Fix empty GCM hash in mediatek.

  Others:

   - Fix DoS potential in lib/mpi.
   - Fix potential out-of-order issues with padata"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits)
  lib/mpi: call cond_resched() from mpi_powm() loop
  crypto: stm32/hash - Fix return issue on update
  crypto: dh - Remove pointless checks for NULL 'p' and 'g'
  crypto: qat - Clean up error handling in qat_dh_set_secret()
  crypto: dh - Don't permit 'key' or 'g' size longer than 'p'
  crypto: dh - Don't permit 'p' to be 0
  crypto: dh - Fix double free of ctx->p
  hwrng: iproc-rng200 - Add support for BCM7278
  dt-bindings: rng: Document BCM7278 RNG200 compatible
  crypto: chcr - Replace _manual_ swap with swap macro
  crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[]
  hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume
  crypto: atmel - remove empty functions
  crypto: ecdh - remove empty exit()
  MAINTAINERS: update maintainer for qat
  crypto: caam - remove unused param of ctx_map_to_sec4_sg()
  crypto: caam - remove unneeded edesc zeroization
  crypto: atmel-aes - Reset the controller before each use
  crypto: atmel-aes - properly set IV after {en,de}crypt
  hwrng: core - Reset user selected rng by writing "" to rng_current
  ...
2017-11-14 10:52:09 -08:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Gilad Ben-Yossef 4f0fc1600e crypto: sm3 - add OSCCA SM3 secure hash
Add OSCCA SM3 secure hash (OSCCA GM/T 0004-2012 SM3)
generic hash transformation.

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-09-22 17:43:07 +08:00
Stephan Mueller 72548b093e crypto: algif_aead - copy AAD from src to dst
Use the NULL cipher to copy the AAD and PT/CT from the TX SGL
to the RX SGL. This allows an in-place crypto operation on the
RX SGL for encryption, because the TX data is always smaller or
equal to the RX data (the RX data will hold the tag).

For decryption, a per-request TX SGL is created which will only hold
the tag value. As the RX SGL will have no space for the tag value and
an in-place operation will not write the tag buffer, the TX SGL with the
tag value is chained to the RX SGL. This now allows an in-place
crypto operation.

For example:

* without the patch:
kcapi -x 2 -e -c "gcm(aes)" -p 89154d0d4129d322e4487bafaa4f6b46 -k c0ece3e63198af382b5603331cc23fa8 -i 7e489b83622e7228314d878d -a afcd7202d621e06ca53b70c2bdff7fb2 -l 16 -u -s
00000000000000000000000000000000f4a3eacfbdadd3b1a17117b1d67ffc1f1e21efbbc6d83724a8c296e3bb8cda0c

* with the patch:
kcapi -x 2 -e -c "gcm(aes)" -p 89154d0d4129d322e4487bafaa4f6b46 -k c0ece3e63198af382b5603331cc23fa8 -i 7e489b83622e7228314d878d -a afcd7202d621e06ca53b70c2bdff7fb2 -l 16 -u -s
afcd7202d621e06ca53b70c2bdff7fb2f4a3eacfbdadd3b1a17117b1d67ffc1f1e21efbbc6d83724a8c296e3bb8cda0c

Tests covering this functionality have been added to libkcapi.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-08-09 20:17:52 +08:00
Tudor-Dan Ambarus 6755fd269d crypto: ecdh - add privkey generation support
Add support for generating ecc private keys.

Generation of ecc private keys is helpful in a user-space to kernel
ecdh offload because the keys are not revealed to user-space. Private
key generation is also helpful to implement forward secrecy.

If the user provides a NULL ecc private key, the kernel will generate it
and further use it for ecdh.

Move ecdh's object files below drbg's. drbg must be present in the kernel
at the time of calling.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Stephan Müller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-10 12:04:35 +08:00