Commit Graph

322 Commits

Author SHA1 Message Date
Jesper Dangaard Brouer 817b89beb9 samples/bpf: all XDP samples should unload xdp/bpf prog on SIGTERM
It is common XDP practice to unload/deattach the XDP bpf program,
when the XDP sample program is Ctrl-C interrupted (SIGINT) or
killed (SIGTERM).

The samples/bpf programs xdp_redirect_cpu and xdp_rxq_info,
forgot to trap signal SIGTERM (which is the default signal used
by the kill command).

This was discovered by Red Hat QA, which automated scripts depend
on killing the XDP sample program after a timeout period.

Fixes: fad3917e36 ("samples/bpf: add cpumap sample program xdp_redirect_cpu")
Fixes: 0fca931a6f ("samples/bpf: program demonstrating access to xdp_rxq_info")
Reported-by: Jean-Tsung Hsiao <jhsiao@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-16 21:55:32 +02:00
Linus Torvalds 9a76aba02a Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Highlights:

   - Gustavo A. R. Silva keeps working on the implicit switch fallthru
     changes.

   - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From
     Luca Coelho.

   - Re-enable ASPM in r8169, from Kai-Heng Feng.

   - Add virtual XFRM interfaces, which avoids all of the limitations of
     existing IPSEC tunnels. From Steffen Klassert.

   - Convert GRO over to use a hash table, so that when we have many
     flows active we don't traverse a long list during accumluation.

   - Many new self tests for routing, TC, tunnels, etc. Too many
     contributors to mention them all, but I'm really happy to keep
     seeing this stuff.

   - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu.

   - Lots of cleanups and fixes in L2TP code from Guillaume Nault.

   - Add IPSEC offload support to netdevsim, from Shannon Nelson.

   - Add support for slotting with non-uniform distribution to netem
     packet scheduler, from Yousuk Seung.

   - Add UDP GSO support to mlx5e, from Boris Pismenny.

   - Support offloading of Team LAG in NFP, from John Hurley.

   - Allow to configure TX queue selection based upon RX queue, from
     Amritha Nambiar.

   - Support ethtool ring size configuration in aquantia, from Anton
     Mikaev.

   - Support DSCP and flowlabel per-transport in SCTP, from Xin Long.

   - Support list based batching and stack traversal of SKBs, this is
     very exciting work. From Edward Cree.

   - Busyloop optimizations in vhost_net, from Toshiaki Makita.

   - Introduce the ETF qdisc, which allows time based transmissions. IGB
     can offload this in hardware. From Vinicius Costa Gomes.

   - Add parameter support to devlink, from Moshe Shemesh.

   - Several multiplication and division optimizations for BPF JIT in
     nfp driver, from Jiong Wang.

   - Lots of prepatory work to make more of the packet scheduler layer
     lockless, when possible, from Vlad Buslov.

   - Add ACK filter and NAT awareness to sch_cake packet scheduler, from
     Toke Høiland-Jørgensen.

   - Support regions and region snapshots in devlink, from Alex Vesker.

   - Allow to attach XDP programs to both HW and SW at the same time on
     a given device, with initial support in nfp. From Jakub Kicinski.

   - Add TLS RX offload and support in mlx5, from Ilya Lesokhin.

   - Use PHYLIB in r8169 driver, from Heiner Kallweit.

   - All sorts of changes to support Spectrum 2 in mlxsw driver, from
     Ido Schimmel.

   - PTP support in mv88e6xxx DSA driver, from Andrew Lunn.

   - Make TCP_USER_TIMEOUT socket option more accurate, from Jon
     Maxwell.

   - Support for templates in packet scheduler classifier, from Jiri
     Pirko.

   - IPV6 support in RDS, from Ka-Cheong Poon.

   - Native tproxy support in nf_tables, from Máté Eckl.

   - Maintain IP fragment queue in an rbtree, but optimize properly for
     in-order frags. From Peter Oskolkov.

   - Improvde handling of ACKs on hole repairs, from Yuchung Cheng"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits)
  bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT"
  hv/netvsc: Fix NULL dereference at single queue mode fallback
  net: filter: mark expected switch fall-through
  xen-netfront: fix warn message as irq device name has '/'
  cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0
  net: dsa: mv88e6xxx: missing unlock on error path
  rds: fix building with IPV6=m
  inet/connection_sock: prefer _THIS_IP_ to current_text_addr
  net: dsa: mv88e6xxx: bitwise vs logical bug
  net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()
  ieee802154: hwsim: using right kind of iteration
  net: hns3: Add vlan filter setting by ethtool command -K
  net: hns3: Set tx ring' tc info when netdev is up
  net: hns3: Remove tx ring BD len register in hns3_enet
  net: hns3: Fix desc num set to default when setting channel
  net: hns3: Fix for phy link issue when using marvell phy driver
  net: hns3: Fix for information of phydev lost problem when down/up
  net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero
  net: hns3: Add support for serdes loopback selftest
  bnxt_en: take coredump_record structure off stack
  ...
2018-08-15 15:04:25 -07:00
Linus Torvalds e026bcc561 Kbuild updates for v4.19
- verify depmod is installed before modules_install
 
 - support build salt in case build ids must be unique between builds
 
 - allow users to specify additional host compiler flags via HOST*FLAGS,
   and rename internal variables to KBUILD_HOST*FLAGS
 
 - update buildtar script to drop vax support, add arm64 support
 
 - update builddeb script for better debarch support
 
 - document the pit-fall of if_changed usage
 
 - fix parallel build of UML with O= option
 
 - make 'samples' target depend on headers_install to fix build errors
 
 - remove deprecated host-progs variable
 
 - add a new coccinelle script for refcount_t vs atomic_t check
 
 - improve double-test coccinelle script
 
 - misc cleanups and fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJbdFZ0AAoJED2LAQed4NsGcHYP/23txxk3GRP7O4UkfPw9Rtky
 MHiXTgcoy2vbG+l12BgzWX+qFii8XTUe3dQtK4HnGQFUIBtEBV/hpZPJtxfgGSev
 Zou5cv1kr5rNzTkCn//TG3O6/WIkTBCe2hahDCtmGDI3kd/cPK4dHbU/q6KpaqIJ
 qzZYBXIvCeu2GM8idQoCRrwdMpgu1pBz1gz2sDje1yHH2toI7T6cXHRLQDgx+HPq
 LIP7W9GUsoDdXjecvPD51LiW89E6BUxETBh5Ft9r9uzwB5ylQQMcw6Qyu2DiYDUX
 PPsHCMiolYV+Ttcy+vj/67KOvKmEaFotssck+RD/xDCF17zKhRkup+YM8kPLHTVZ
 TcAUZadbnT6U/s2W6GFwvVbN/P7cc3aif+aNCC/Pl23yagp3pydlSCocYxQgiVR7
 /rx48haYDEgu/MJ1X0dOpSO0ErY7zu2OoAlNerW+D9QizwbP+WtZO/CJH8SxQRuN
 dQ1xmyNrie+ODgi9tbc4eBrsb+1rioX927TP5MbJcfXt5CTsxDmIqop5XwyYIoQN
 ZWWlzC8Ii3P2trAVpBgM2IEbngSxwr6T9Wbf1ScJnPKr/o1rq+pBk49cYstTz3kQ
 OwJ8gPwUrkW4R+hlD7L6mL/WcrKzZBQS0Ij1QW2kVSEhRrsKo99psE1/rGehnHu9
 KGB0LYYCqGSOHR4zOjg0
 =VjfG
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - verify depmod is installed before modules_install

 - support build salt in case build ids must be unique between builds

 - allow users to specify additional host compiler flags via HOST*FLAGS,
   and rename internal variables to KBUILD_HOST*FLAGS

 - update buildtar script to drop vax support, add arm64 support

 - update builddeb script for better debarch support

 - document the pit-fall of if_changed usage

 - fix parallel build of UML with O= option

 - make 'samples' target depend on headers_install to fix build errors

 - remove deprecated host-progs variable

 - add a new coccinelle script for refcount_t vs atomic_t check

 - improve double-test coccinelle script

 - misc cleanups and fixes

* tag 'kbuild-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits)
  coccicheck: return proper error code on fail
  Coccinelle: doubletest: reduce side effect false positives
  kbuild: remove deprecated host-progs variable
  kbuild: make samples really depend on headers_install
  um: clean up archheaders recipe
  kbuild: add %asm-generic to no-dot-config-targets
  um: fix parallel building with O= option
  scripts: Add Python 3 support to tracing/draw_functrace.py
  builddeb: Add automatic support for sh{3,4}{,eb} architectures
  builddeb: Add automatic support for riscv* architectures
  builddeb: Add automatic support for m68k architecture
  builddeb: Add automatic support for or1k architecture
  builddeb: Add automatic support for sparc64 architecture
  builddeb: Add automatic support for mips{,64}r6{,el} architectures
  builddeb: Add automatic support for mips64el architecture
  builddeb: Add automatic support for ppc64 and powerpcspe architectures
  builddeb: Introduce functions to simplify kconfig tests in set_debarch
  builddeb: Drop check for 32-bit s390
  builddeb: Change architecture detection fallback to use dpkg-architecture
  builddeb: Skip architecture detection when KBUILD_DEBARCH is set
  ...
2018-08-15 12:09:03 -07:00
David S. Miller c1617fb4c5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
pull-request: bpf-next 2018-08-13

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Add driver XDP support for veth. This can be used in conjunction with
   redirect of another XDP program e.g. sitting on NIC so the xdp_frame
   can be forwarded to the peer veth directly without modification,
   from Toshiaki.

2) Add a new BPF map type REUSEPORT_SOCKARRAY and prog type SK_REUSEPORT
   in order to provide more control and visibility on where a SO_REUSEPORT
   sk should be located, and the latter enables to directly select a sk
   from the bpf map. This also enables map-in-map for application migration
   use cases, from Martin.

3) Add a new BPF helper bpf_skb_ancestor_cgroup_id() that returns the id
   of cgroup v2 that is the ancestor of the cgroup associated with the
   skb at the ancestor_level, from Andrey.

4) Implement BPF fs map pretty-print support based on BTF data for regular
   hash table and LRU map, from Yonghong.

5) Decouple the ability to attach BTF for a map from the key and value
   pretty-printer in BPF fs, and enable further support of BTF for maps for
   percpu and LPM trie, from Daniel.

6) Implement a better BPF sample of using XDP's CPU redirect feature for
   load balancing SKB processing to remote CPU. The sample implements the
   same XDP load balancing as Suricata does which is symmetric hash based
   on IP and L4 protocol, from Jesper.

7) Revert adding NULL pointer check with WARN_ON_ONCE() in __xdp_return()'s
   critical path as it is ensured that the allocator is present, from Björn.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-13 10:07:23 -07:00
David S. Miller 6a92ef08a1 Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/net 2018-08-11 17:52:00 -07:00
Jesper Dangaard Brouer 1bca4e6b18 samples/bpf: xdp_redirect_cpu load balance like Suricata
This implement XDP CPU redirection load-balancing across available
CPUs, based on the hashing IP-pairs + L4-protocol.  This equivalent to
xdp-cpu-redirect feature in Suricata, which is inspired by the
Suricata 'ippair' hashing code.

An important property is that the hashing is flow symmetric, meaning
that if the source and destination gets swapped then the selected CPU
will remain the same.  This is helps locality by placing both directions
of a flows on the same CPU, in a forwarding/routing scenario.

The hashing INITVAL (15485863 the 10^6th prime number) was fairly
arbitrary choosen, but experiments with kernel tree pktgen scripts
(pktgen_sample04_many_flows.sh +pktgen_sample05_flow_per_thread.sh)
showed this improved the distribution.

This patch also change the default loaded XDP program to be this
load-balancer.  As based on different user feedback, this seems to be
the expected behavior of the sample xdp_redirect_cpu.

Link: https://github.com/OISF/suricata/commit/796ec08dd7a63
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-10 16:07:49 +02:00
Jesper Dangaard Brouer 1139568658 samples/bpf: add Paul Hsieh's (LGPL 2.1) hash function SuperFastHash
Adjusted function call API to take an initval. This allow the API
user to set the initial value, as a seed. This could also be used for
inputting the previous hash.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-10 16:07:49 +02:00
Jesper Dangaard Brouer 37d7ff2595 samples/bpf: xdp_redirect_cpu adjustment to reproduce teardown race easier
The teardown race in cpumap is really hard to reproduce.  These changes
makes it easier to reproduce, for QA.

The --stress-mode now have a case of a very small queue size of 8, that helps
to trigger teardown flush to encounter a full queue, which results in calling
xdp_return_frame API, in a non-NAPI protect context.

Also increase MAX_CPUS, as my QA department have larger machines than me.

Tested-by: Jean-Tsung Hsiao <jhsiao@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-09 21:50:44 +02:00
Roman Gushchin 28ba068760 samples/bpf: extend test_cgrp2_attach2 test to use cgroup storage
The test_cgrp2_attach test covers bpf cgroup attachment code well,
so let's re-use it for testing allocation/releasing of cgroup storage.

The extension is pretty straightforward: the bpf program will use
the cgroup storage to save the number of transmitted bytes.

Expected output:
  $ ./test_cgrp2_attach2
  Attached DROP prog. This ping in cgroup /foo should fail...
  ping: sendmsg: Operation not permitted
  Attached DROP prog. This ping in cgroup /foo/bar should fail...
  ping: sendmsg: Operation not permitted
  Attached PASS prog. This ping in cgroup /foo/bar should pass...
  Detached PASS from /foo/bar while DROP is attached to /foo.
  This ping in cgroup /foo/bar should fail...
  ping: sendmsg: Operation not permitted
  Attached PASS from /foo/bar and detached DROP from /foo.
  This ping in cgroup /foo/bar should pass...
  ### override:PASS
  ### multi:PASS

Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-03 00:47:33 +02:00
Jakub Kicinski 6748182c2d samples: bpf: convert xdpsock_user.c to libbpf
Convert xdpsock_user.c to use libbpf instead of bpf_load.o.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-27 07:18:44 +02:00
Jakub Kicinski e1a40ef418 samples: bpf: convert xdp_fwd_user.c to libbpf
Convert xdp_fwd_user.c to use libbpf instead of bpf_load.o.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-27 07:18:44 +02:00
Taeung Song 9778cfdfc9 samples/bpf: Add BTF build flags to Makefile
To smoothly test BTF supported binary on samples/bpf,
let samples/bpf/Makefile probe llc, pahole and
llvm-objcopy for BPF support and use them
like tools/testing/selftests/bpf/Makefile
changed from the commit c0fa1b6c3e ("bpf: btf:
Add BTF tests").

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-27 03:50:19 +02:00
Brian Brooks 598135e744 samples/bpf: xdpsock: order memory on AArch64
Define u_smp_rmb() and u_smp_wmb() to respective barrier instructions.
This ensures the processor will order accesses to queue indices against
accesses to queue ring entries.

Signed-off-by: Brian Brooks <brian.brooks@linaro.org>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-27 03:49:02 +02:00
David S. Miller eae249b27f Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
pull-request: bpf-next 2018-07-20

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Add sharing of BPF objects within one ASIC: this allows for reuse of
   the same program on multiple ports of a device, and therefore gains
   better code store utilization. On top of that, this now also enables
   sharing of maps between programs attached to different ports of a
   device, from Jakub.

2) Cleanup in libbpf and bpftool's Makefile to reduce unneeded feature
   detections and unused variable exports, also from Jakub.

3) First batch of RCU annotation fixes in prog array handling, i.e.
   there are several __rcu markers which are not correct as well as
   some of the RCU handling, from Roman.

4) Two fixes in BPF sample files related to checking of the prog_cnt
   upper limit from sample loader, from Dan.

5) Minor cleanup in sockmap to remove a set but not used variable,
   from Colin.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20 23:58:30 -07:00
David S. Miller c4c5551df1 Merge ra.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux
All conflicts were trivial overlapping changes, so reasonably
easy to resolve.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20 21:17:12 -07:00
Laura Abbott 8377bd2b9e kbuild: Rename HOST_LOADLIBES to KBUILD_HOSTLDLIBS
In preparation for enabling command line LDLIBS, re-name HOST_LOADLIBES
to KBUILD_HOSTLDLIBS as the internal use only flags. Also rename
existing usage to HOSTLDLIBS for consistency. This should not have any
visible effects.

Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-18 01:18:05 +09:00
Laura Abbott 96f14fe738 kbuild: Rename HOSTCFLAGS to KBUILD_HOSTCFLAGS
In preparation for enabling command line CFLAGS, re-name HOSTCFLAGS to
KBUILD_HOSTCFLAGS as the internal use only flags. This should not have
any visible effects.

Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-18 01:18:05 +09:00
Dan Carpenter ee583014a9 samples/bpf: test_cgrp2_sock2: fix an off by one
"prog_cnt" is the number of elements which are filled out in prog_fd[]
so the test should be >= instead of >.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-07-16 15:01:09 -07:00
Dan Carpenter b0294bc1ad samples: bpf: ensure that we don't load over MAX_PROGS programs
I can't see that we check prog_cnt to ensure it doesn't go over
MAX_PROGS.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-07-16 15:00:56 -07:00
Jesper Dangaard Brouer d23b27c02f samples/bpf: xdp_redirect_cpu handle parsing of double VLAN tagged packets
People noticed that the code match on IEEE 802.1ad (ETH_P_8021AD) ethertype,
and this implies Q-in-Q or double tagged VLANs.  Thus, we better parse
the next VLAN header too.  It is even marked as a TODO.

This is relevant for real world use-cases, as XDP cpumap redirect can be
used when the NIC RSS hashing is broken.  E.g. the ixgbe driver HW cannot
handle double tagged VLAN packets, and places everything into a single
RX queue.  Using cpumap redirect, users can redistribute traffic across
CPUs to solve this, which is faster than the network stacks RPS solution.

It is left as an exerise how to distribute the packets across CPUs.  It
would be convenient to use the RX hash, but that is not _yet_ exposed
to XDP programs. For now, users can code their own hash, as I've demonstrated
in the Suricata code (where Q-in-Q is handled correctly).

Reported-by: Florian Maury <florian.maury-cv@x-cli.eu>
Reported-by: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-14 00:52:54 +02:00
Taeung Song b9626f45ab samples/bpf: Fix tc and ip paths in xdp2skb_meta.sh
The below path error can occur:

  # ./xdp2skb_meta.sh --dev eth0 --list
  ./xdp2skb_meta.sh: line 61: /usr/sbin/tc: No such file or directory

So just use command names instead of absolute paths of tc and ip.
In addition, it allow callers to redefine $TC and $IP paths

Fixes: 36e04a2d78 ("samples/bpf: xdp2skb_meta shows transferring info from XDP to SKB")
Reviewed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-10 09:19:01 +02:00
Taeung Song c48424d993 samples/bpf: add .gitignore file
For untracked executables of samples/bpf, add this.

  Untracked files:
    (use "git add <file>..." to include in what will be committed)

  	samples/bpf/cpustat
  	samples/bpf/fds_example
  	samples/bpf/lathist
  	samples/bpf/load_sock_ops
	...

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-05 09:58:53 +02:00
Taeung Song 02a2f000a3 samples/bpf: Check the error of write() and read()
test_task_rename() and test_urandom_read()
can be failed during write() and read(),
So check the result of them.

Reviewed-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-05 09:58:52 +02:00
Taeung Song 492b7e8945 samples/bpf: Check the result of system()
To avoid the below build warning message,
use new generate_load() checking the return value.

  ignoring return value of ‘system’, declared with attribute warn_unused_result

And it also refactors the duplicate code of both
test_perf_event_all_cpu() and test_perf_event_task()

Cc: Teng Qin <qinteng@fb.com>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-05 09:58:52 +02:00
Taeung Song 4d5d33a085 samples/bpf: add missing <linux/if_vlan.h>
This fixes build error regarding redefinition:

    CLANG-bpf  samples/bpf/parse_varlen.o
  samples/bpf/parse_varlen.c:111:8: error: redefinition of 'vlan_hdr'
  struct vlan_hdr {
         ^
  ./include/linux/if_vlan.h:38:8: note: previous definition is here

So remove duplicate 'struct vlan_hdr' in sample code and include if_vlan.h

Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-05 09:58:52 +02:00
David S. Miller b68034087a Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
pull-request: bpf-next 2018-07-03

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Various improvements to bpftool and libbpf, that is, bpftool build
   speed improvements, missing BPF program types added for detection
   by section name, ability to load programs from '.text' section is
   made to work again, and better bash completion handling, from Jakub.

2) Improvements to nfp JIT's map read handling which allows for optimizing
   memcpy from map to packet, from Jiong.

3) New BPF sample is added which demonstrates XDP in combination with
   bpf_perf_event_output() helper to sample packets on all CPUs, from Toke.

4) Add a new BPF kselftest case for tracking connect(2) BPF hooks
   infrastructure in combination with TFO, from Andrey.

5) Extend the XDP/BPF xdp_rxq_info sample code with a cmdline option to
   read payload from packet data in order to use it for benchmarking.
   Also for '--action XDP_TX' option implement swapping of MAC addresses
   to avoid drops on some hardware seen during testing, from Jesper.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04 08:53:53 +09:00
Magnus Karlsson c03079c9d9 samples/bpf: deal with EBUSY return code from sendmsg in xdpsock sample
Sendmsg in the SKB path of AF_XDP can now return EBUSY when a packet
was discarded and completed by the driver. Just ignore this message
in the sample application.

Fixes: b4b8faa1de ("samples/bpf: sample application and documentation for AF_XDP sockets")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Reported-by: Pavel Odintsov <pavel@fastnetmon.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-07-02 18:37:12 -07:00
David Ahern 4c79579b44 bpf: Change bpf_fib_lookup to return lookup status
For ACLs implemented using either FIB rules or FIB entries, the BPF
program needs the FIB lookup status to be able to drop the packet.
Since the bpf_fib_lookup API has not reached a released kernel yet,
change the return code to contain an encoding of the FIB lookup
result and return the nexthop device index in the params struct.

In addition, inform the BPF program of any post FIB lookup reason as
to why the packet needs to go up the stack.

The fib result for unicast routes must have an egress device, so remove
the check that it is non-NULL.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-29 00:02:02 +02:00
Jesper Dangaard Brouer 509fda105b samples/bpf: xdp_rxq_info action XDP_TX must adjust MAC-addrs
XDP_TX requires also changing the MAC-addrs, else some hardware
may drop the TX packet before reaching the wire.  This was
observed with driver mlx5.

If xdp_rxq_info select --action XDP_TX the swapmac functionality
is activated.  It is also possible to manually enable via cmdline
option --swapmac.  This is practical if wanting to measure the
overhead of writing/updating payload for other action types.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-28 23:50:20 +02:00
Jesper Dangaard Brouer 0d25c43ab9 samples/bpf: extend xdp_rxq_info to read packet payload
There is a cost associated with reading the packet data payload
that this test ignored.  Add option --read to allow enabling
reading part of the payload.

This sample/tool helps us analyse an issue observed with a NIC
mlx5 (ConnectX-5 Ex) and an Intel(R) Xeon(R) CPU E5-1650 v4.

With no_touch of data:

Running XDP on dev:mlx5p1 (ifindex:8) action:XDP_DROP options:no_touch
XDP stats       CPU     pps         issue-pps
XDP-RX CPU      0       14,465,157  0
XDP-RX CPU      1       14,464,728  0
XDP-RX CPU      2       14,465,283  0
XDP-RX CPU      3       14,465,282  0
XDP-RX CPU      4       14,464,159  0
XDP-RX CPU      5       14,465,379  0
XDP-RX CPU      total   86,789,992

When not touching data, we observe that the CPUs have idle cycles.
When reading data the CPUs are 100% busy in softirq.

With reading data:

Running XDP on dev:mlx5p1 (ifindex:8) action:XDP_DROP options:read
XDP stats       CPU     pps         issue-pps
XDP-RX CPU      0       9,620,639   0
XDP-RX CPU      1       9,489,843   0
XDP-RX CPU      2       9,407,854   0
XDP-RX CPU      3       9,422,289   0
XDP-RX CPU      4       9,321,959   0
XDP-RX CPU      5       9,395,242   0
XDP-RX CPU      total   56,657,828

The effect seen above is a result of cache-misses occuring when
more RXQs are being used.  Based on perf-event observations, our
conclusion is that the CPUs DDIO (Direct Data I/O) choose to
deliver packet into main memory, instead of L3-cache.  We also
found, that this can be mitigated by either using less RXQs or by
reducing NICs the RX-ring size.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-28 23:50:20 +02:00
Toke Høiland-Jørgensen 1e54ad251a samples/bpf: Add xdp_sample_pkts example
Add an example program showing how to sample packets from XDP using the
perf event buffer. The example userspace program just prints the ethernet
header for every packet sampled.

Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-27 11:01:03 +02:00
Björn Töpel 9f5232cc7f samples/bpf: xdpsock: use skb Tx path for XDP_SKB
Make sure that XDP_SKB also uses the skb Tx path.

Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-05 15:48:57 +02:00
Magnus Karlsson a65ea68b8d samples/bpf: minor *_nb_free performance fix
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-04 17:21:02 +02:00
Björn Töpel a412ef54fc samples/bpf: adapted to new uapi
Here, the xdpsock sample application is adjusted to the new descriptor
format.

Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-04 17:21:02 +02:00
David Ahern bd3a08aaa9 bpf: flowlabel in bpf_fib_lookup should be flowinfo
As Michal noted the flow struct takes both the flow label and priority.
Update the bpf_fib_lookup API to note that it is flowinfo and not just
the flow label.

Cc: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-06-03 18:29:07 -07:00
David S. Miller 90fed9c946 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:

====================
pull-request: bpf-next 2018-05-24

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Björn Töpel cleans up AF_XDP (removes rebind, explicit cache alignment from uapi, etc).

2) David Ahern adds mtu checks to bpf_ipv{4,6}_fib_lookup() helpers.

3) Jesper Dangaard Brouer adds bulking support to ndo_xdp_xmit.

4) Jiong Wang adds support for indirect and arithmetic shifts to NFP

5) Martin KaFai Lau cleans up BTF uapi and makes the btf_header extensible.

6) Mathieu Xhonneux adds an End.BPF action to seg6local with BPF helpers allowing
   to edit/grow/shrink a SRH and apply on a packet generic SRv6 actions.

7) Sandipan Das adds support for bpf2bpf function calls in ppc64 JIT.

8) Yonghong Song adds BPF_TASK_FD_QUERY command for introspection of tracing events.

9) other misc fixes from Gustavo A. R. Silva, Sirio Balmelli, John Fastabend, and Magnus Karlsson
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24 22:20:51 -04:00
Jesper Dangaard Brouer a570e48fee samples/bpf: xdp_monitor use err code from tracepoint xdp:xdp_devmap_xmit
Update xdp_monitor to use the recently added err code introduced
in tracepoint xdp:xdp_devmap_xmit, to show if the drop count is
caused by some driver general delivery problem.  Other kind of drops
will likely just be more normal TX space issues.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-24 18:36:15 -07:00
Jesper Dangaard Brouer 9940fbf633 samples/bpf: xdp_monitor use tracepoint xdp:xdp_devmap_xmit
The xdp_monitor sample/tool is updated to use the new tracepoint
xdp:xdp_devmap_xmit the previous patch just introduced.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-24 18:36:15 -07:00
Yonghong Song ecb96f7fe1 samples/bpf: add a samples/bpf test for BPF_TASK_FD_QUERY
This is mostly to test kprobe/uprobe which needs kernel headers.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-24 18:18:20 -07:00
Björn Töpel 1c4917da36 samples/bpf: adapt xdpsock to the new uapi
Adapt xdpsock to use the new getsockopt introduced in the previous
commit.

Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-22 10:25:06 +02:00
David S. Miller 6f6e434aa2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
S390 bpf_jit.S is removed in net-next and had changes in 'net',
since that code isn't used any more take the removal.

TLS data structures split the TX and RX components in 'net-next',
put the new struct members from the bug fix in 'net' into the RX
part.

The 'net-next' tree had some reworking of how the ERSPAN code works in
the GRE tunneling code, overlapping with a one-line headroom
calculation fix in 'net'.

Overlapping changes in __sock_map_ctx_update_elem(), keep the bits
that read the prog members via READ_ONCE() into local variables
before using them.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-21 16:01:54 -04:00
Björn Töpel dac09149d9 xsk: clean up SPDX headers
Clean up SPDX-License-Identifier and removing licensing leftovers.

Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-18 16:07:02 +02:00
David Ahern 44edef77bd samples/bpf: Decrement ttl in fib forwarding example
Only consider forwarding packets if ttl in received packet is > 1 and
decrement ttl before handing off to bpf_redirect_map.

Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-16 22:04:52 +02:00
Jakub Kicinski 768759edb9 samples: bpf: make the build less noisy
Building samples with clang ignores the $(Q) setting, always
printing full command to the output.  Make it less verbose.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-14 22:52:10 -07:00
Jakub Kicinski 0cc54db181 samples: bpf: move libbpf from object dependencies to libs
Make complains that it doesn't know how to make libbpf.a:

scripts/Makefile.host:106: target 'samples/bpf/../../tools/lib/bpf/libbpf.a' doesn't match the target pattern

Now that we have it as a dependency of the sources simply add libbpf.a
to libraries not objects.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-14 22:52:10 -07:00
Jakub Kicinski 787360f8c2 samples: bpf: fix build after move to compiling full libbpf.a
There are many ways users may compile samples, some of them got
broken by commit 5f9380572b ("samples: bpf: compile and link
against full libbpf").  Improve path resolution and make libbpf
building a dependency of source files to force its build.

Samples should now again build with any of:
 cd samples/bpf; make
 make samples/bpf/
 make -C samples/bpf
 cd samples/bpf; make O=builddir
 make samples/bpf/ O=builddir
 make -C samples/bpf O=builddir
 export KBUILD_OUTPUT=builddir
 make samples/bpf/
 make -C samples/bpf

Fixes: 5f9380572b ("samples: bpf: compile and link against full libbpf")
Reported-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-14 22:52:10 -07:00
Jakub Kicinski 8d93045077 samples: bpf: rename libbpf.h to bpf_insn.h
The libbpf.h file in samples is clashing with libbpf's header.
Since it only includes a subset of filter.h instruction helpers
rename it to bpf_insn.h.  Drop the unnecessary include of bpf/bpf.h.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-14 22:52:10 -07:00
Jakub Kicinski 2bf3e2ef42 samples: bpf: include bpf/bpf.h instead of local libbpf.h
There are two files in the tree called libbpf.h which is becoming
problematic.  Most samples don't actually need the local libbpf.h
they simply include it to get to bpf/bpf.h.  Include bpf/bpf.h
directly instead.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-14 22:52:10 -07:00
Prashant Bhole 53ea24c20c samples/bpf: xdp_monitor, accept short options
Updated optstring parameter for getopt_long() to accept short options.
Also updated usage() function.

Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-14 23:41:59 +02:00
Alexei Starovoitov b1ae32dbab x86/cpufeature: Guard asm_volatile_goto usage for BPF compilation
Workaround for the sake of BPF compilation which utilizes kernel
headers, but clang does not support ASM GOTO and fails the build.

Fixes: d0266046ad ("x86: Remove FAST_FEATURE_TESTS")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: daniel@iogearbox.net
Cc: peterz@infradead.org
Cc: netdev@vger.kernel.org
Cc: bp@alien8.de
Cc: yhs@fb.com
Cc: kernel-team@fb.com
Cc: torvalds@linux-foundation.org
Cc: davem@davemloft.net
Link: https://lkml.kernel.org/r/20180513193222.1997938-1-ast@kernel.org
2018-05-13 21:49:14 +02:00