Commit Graph

53 Commits

Author SHA1 Message Date
Guenter Roeck c10b3ee8aa hwmon: (w83795) Fix multi-line comments
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-23 10:02:18 +01:00
Jean Delvare 72fea694c4 hwmon: (w83795) Unconditionally support manual fan speed control
Manual fan speed control uses a standard interface and has received
sufficient testing and review by now, it can be enabled
unconditionally. This includes attributes pwm[1-8], pwm[1-8]_enable,
pwm[1-8]_mode and pwm[1-8]_freq.

We only let the user switch from automatic mode to manual mode, but
not the other way around, as automatic control settings may not have
been set properly by the BIOS.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-23 10:02:17 +01:00
Axel Lin f0967eea80 hwmon: convert drivers/hwmon/* to use module_i2c_driver()
This patch converts the drivers in drivers/hwmon/* to use the
module_i2c_driver() macro which makes the code smaller and a bit simpler.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Corentin Labbe <corentin.labbe@geomatys.fr>
Cc: Dirk Eibach <eibach@gdsys.de>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Steve Glendinning <steve.glendinning@smsc.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Guillaume Ligneul <guillaume.ligneul@gmail.com>
Cc: David George <david.george@ska.ac.za>
Cc: "Hans J. Koch" <hjk@hansjkoch.de>
Cc: Marc Hulsman <m.hulsman@tudelft.nl>
Cc: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-03-18 18:26:50 -07:00
Rusty Russell 90ab5ee941 module_param: make bool parameters really bool (drivers & misc)
module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.

Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-13 09:32:20 +10:30
Frans Meulenbroeks 179c4fdb56 hwmon: replaced strict_str* with kstr*
replaced strict_strtol with kstrtol and
replaced strict_strtuol with kstrtuol

This satisfies checkpatch -f
Compile tested only: no warnings or errors given

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05 08:19:34 -08:00
Jean Delvare 014bcd28a0 hwmon: (w83795) Silent false warning from gcc
The code triggers a false warning with older versions of gcc:
w83795.c: In function 'w83795_update_device':
w83795.c:475: warning: 'lsb' may be used uninitialized in this function

I admit that the code is a little tricky, but I see no way to write it
differently without hurting performance. So let's just silent the
warning with a needless initialization.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-01-12 21:55:09 +01:00
Jean Delvare 52d159eecc hwmon: (w83795) Check for BEEP pin availability
On the W83795ADG, there's a single pin for BEEP and OVT#, so you
can't have both. Check the configuration and don't create beep
attributes when BEEP pin is not available.

The W83795G has a dedicated BEEP pin so the functionality is always
available there.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-15 21:38:57 +01:00
Jean Delvare 793c51d5fd hwmon: (w83795) Clear intrusion alarm immediately
When asked to clear the intrusion alarm, do so immediately. We have to
invalidate the cache to make sure the new status will be read. But we
also have to read from the status register once to clear the pending
alarm, as writing to CLR_CHS surprising won't clear it automatically.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-15 21:38:57 +01:00
Jean Delvare cf6b9ea661 hwmon: (w83795) Read the intrusion state properly
We can't read the intrusion state from the real-time alarm registers
as we do for all other alarm flags, because real-time alarm bits don't
stick (by definition) and the intrusion state has to stick until
explicitly cleared (otherwise it has little value.)

So we have to use the interrupt status register instead, which is read
from the same address but with a configuration bit flipped in another
register.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-15 21:38:56 +01:00
Jean Delvare 2a2d27da00 hwmon: (w83795) Print the actual temperature channels as sources
Don't expose raw register values to user-space. Decode and encode
temperature channels selected as temperature sources as needed.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-15 21:38:56 +01:00
Jean Delvare edff2f8d81 hwmon: (w83795) List all usable temperature sources
Temperature sources are not correlated directly with temperature
channels. A look-up table is required to find out which temperature
sources can be used depending on which temperature channels (both
analog and digital) are enabled.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-15 21:38:56 +01:00
Jean Delvare d5ab845a13 hwmon: (w83795) Expose fan control method
Expose fan control method (DC vs. PWM) using the standard sysfs
attributes. I've made it read-only as the board should be wired for
a given mode, the BIOS should have set up the chip for this mode, and
you shouldn't have to change it. But it would be easy enough to make
it changeable if someone comes up with a use case.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-15 21:38:56 +01:00
Jean Delvare ae51cd9bcd hwmon: (w83795) Fix fan control mode attributes
There were two bugs:
* Speed cruise mode was improperly reported for all fans but fan1.
* Fan control method (PWM vs. DC) was mixed with the control mode.
  It will be added back as a separate attribute, as per the standard
  sysfs interface.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-15 21:38:56 +01:00
Jean Delvare 2437710102 hwmon: (w83795) Use standard attributes for chassis intrusion
Follow the standard attribute naming for the chassis intrusion
feature. I couldn't test the beeping (my board apparently doesn't do
that) but the alarm works fine.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:49 +02:00
Jean Delvare 00030af231 hwmon: (w83795) Exclude fan control feature by default
The fan control feature of the w83795 driver is insufficiently
reviewed and tested for public consumption at this time, so make it
optional and disabled by default. We will change the default when
review and testing is deemed sufficient. Ultimately the option will
go away.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:49 +02:00
Jean Delvare e3760b432d hwmon: (w83795) Add myself as co-author and maintainer
I've made so many changes to the w83795 driver that it's only fair to
list myself as a co-author. I'll also maintain the driver for some
time. There's more work needed on the driver for sure.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:49 +02:00
Jean Delvare eb02755a50 hwmon: (w83795) More style cleanups
Cleanups suggested by Guenter Roeck, falling into 4 categories:
* Swapping test orders, because if (var == CONSTANT) is much easier to
  read than if (CONSTANT == var).
* Simplifying comparisons with 0.
* Dropping unneeded masks.
* Dropping unneeded parentheses and curly braces.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:49 +02:00
Jean Delvare 5d2cd958f7 hwmon: (w83795) Fix LSB reading of voltage limits
Wrong index caused the wrong register value to be read, resulting in
random LSB for voltage limits.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:49 +02:00
Jean Delvare 21fc977551 hwmon: (w83795) Use dev_get_drvdata() where possible
When we don't need the client pointer, calling dev_get_drvdata() is
more efficient that calling to_i2c_client() and then
i2c_get_clientdata().

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:49 +02:00
Jean Delvare 1bb3450ce5 hwmon: (w83795) Delay reading pwm config registers
Wait until we need the pwm config register values, instead of
pre-reading them. This saves over 1 second on modprobe on my test
system.

Obviously this time is added when first accessing pwm config
attributes, however not everybody will use them, so it seems unfair
to slow down driver loading (and thus boot) for an optional feature.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:48 +02:00
Jean Delvare 2ae61de905 hwmon: (w83795) Delay reading limit registers
Wait until we need the limit register values, instead of pre-reading
them. This saves 544 ms on modprobe on my test system. Obviously this
time is added when first running "sensors" or any other monitoring
application, but I think it is better than slowing down the boot.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:48 +02:00
Jean Delvare 0d7237bfd1 hwmon: (w83795) Move register reads to dedicated functions
Move initial register reads out of probe, to dedicated functions.
This makes the code clearer, and will be needed if we want to delay
calling these functions until they are needed, or want to call them
periodically.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:48 +02:00
Jean Delvare 476a4e5d37 hwmon: (w83795) Pack similar register reads
Pack similar register reads using for loops.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:48 +02:00
Jean Delvare fd7f82b8a3 hwmon: (w83795) Make W83795_REG_PWM more efficient
Cascaded conditionals are inefficient. Reorder the fields so that
PWM register addresses can be computed more efficiently.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-28 20:31:48 +02:00
Jean Delvare 5f7b77cbd4 hwmon: (w83795) Don't pre-read values we'll update later
There is no point in reading registers during initialization if we
will refresh the values in the update function later. This is only
slowing down the driver loading with no benefit, stop doing it.
This change saves 480 ms on driver load on my test system.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:48 +02:00
Jean Delvare 39deb6993e hwmon: (w83795) Simplify temperature sensor type handling
All 3 temperature sensor type sysfs functions (show_temp_mode,
store_temp_mode and show_dts_mode) can be simplified. We don't
create these files when the correponding input isn't in temperature
monitoring mode, so there is no point in handling that case.
Likewise, we don't allow changing inputs from temperature to voltage,
so the code handling this case is dead and can be removed.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:48 +02:00
Jean Delvare cd316df582 hwmon: (w83795) Drop _NUM constants
Consistently use ARRAY_SIZE() to control for loops.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:48 +02:00
Jean Delvare 49c7347a44 hwmon: (w83795) Drop REST_VLT_BEGIN/END
Get rid of REST_VLT_BEGIN and REST_VLT_END, they don't make the code
more readable.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:48 +02:00
Jean Delvare 7eb8d508b5 hwmon: (w83795) Fix parity checks
x % 1 is obviously wrong, as it always evaluates to 0. You want
x % 2, or x & 1, for parity checking.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:47 +02:00
Jean Delvare a654b9d4e7 hwmon: (w83795) Get rid of VRLSB_SHIFT
VRLSB_SHIFT is a non-sense, the actual shift depends on the sensor
type (fans need 4, other sensors need 6). Get rid of it to prevent
any confusion. Also get rid of the useless masking, the meaningful
bits are always the MSb so there's nothing to mask out after
shifting.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:47 +02:00
Jean Delvare c1a792a6ee hwmon: (w83795) Avoid reading the same register twice
Shorten driver load time by avoiding duplicate register access during
initialization. This saves 112 ms on modprobe on my test system.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:47 +02:00
Jean Delvare 02728ffef9 hwmon: (w83795) Rework beep_enable implementation
Handle beep_enable just like all other beep bits. It doesn't need
anything special, so let's avoid redundant code. This also saves a
duplicate register read at initialization time.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:47 +02:00
Jean Delvare 54891a3c13 hwmon: (w83795) Report PECI agent Tbase values
On systems with PECI, report PECI agent Tbase temperature values.
This is informative only.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:47 +02:00
Jean Delvare dd127f5ccd hwmon: (w83795) Properly handle negative temperatures
The temperature registers hold regular 2's complement values, no need
to add any arithmetics.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:47 +02:00
Jean Delvare a0ce402fb0 hwmon: (w83795) Rename temperature limit attributes
Follow the standard for temperature limit attribute naming, so that
libsensors will pick the values.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:47 +02:00
Jean Delvare 01879a855f hwmon: (w83795) Fix PWM duty cycle frequency attributes
The PWM duty cycle frequenty attributes are improperly named
(fanN_div instead of pwmN_div) and contain raw values instead of
actual frequencies. Rename them and fix their contents.

Also improve the logic when the user asks for a new frequency, to
always pick the closest supported frequency. The algorithm could
certainly be optimized, but the operation is infrequent enough that
I don't think it's worth the effort.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:47 +02:00
Jean Delvare 0e256018b0 hwmon: (w83795) Add support for dynamic in0-2 limits
The W83795G can be configured to set the in0, in1 and/or in2 voltage
limits dynamically based on VID input pins. Switch the respective
sysfs attributes to read-only.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:46 +02:00
Jean Delvare 6c82b2f3fb hwmon: (w83795) Fix LSB reading of fan speeds
Misplaced parentheses caused the wrong register value to be read,
resulting in random LSB for fan speed values and limits.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:46 +02:00
Jean Delvare 71caf46fbf hwmon: (w83795) Clean up probe function
* The data structure is zalloc'd, so no need to set individual fields
  to 0 explicitly.
* Refactor the handling of pins that can be used for either
  temperature or voltage monitoring.
* Misc other clean-ups.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:46 +02:00
Jean Delvare 6f9dfd85f7 hwmon: (w83795) Fix in17-in20 gain factor
Gain bit set means 1x gain and cleared means 8x gain, not the other
way around.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:46 +02:00
Jean Delvare 80646b9586 hwmon: (w83795) Only start monitoring if needed
This saves an SMBus write if monitoring was already enabled.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:46 +02:00
Jean Delvare 86ef4d2fd5 hwmon: (w83795) Add const markers
Attribute structures can be made const. Same for the I2C address
list.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:46 +02:00
Jean Delvare b2cc528e58 hwmon: (w83795) Only create fan[1-8]_target files when needed
Only create fan[1-8]_target files when the fan in question can be
controlled (PWM output is present.) Also name these files according
to the standard.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:46 +02:00
Jean Delvare b5f6a90a0b hwmon: (w83795) Move PWM attributes to a dedidated array
Use a dedicated 2D array for PWM attributes. This way, PWM attributes
are handled the same way as other attributes, this is more consistent.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:46 +02:00
Jean Delvare 87df0dad3e hwmon: (w83795) Use 2D arrays for many device attributes
Use 2D arrays for in, fan, temp and dts device attributes. Using
linear arrays is too risky as we have to skip some groups depending
on the device model and configuration. Adding or removing an
attribute would let the driver build silently but then it would crash
at runtime. With 2D arrays, the consistency checking happens at build
time, which is much safer.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:45 +02:00
Jean Delvare 6f3dcde9c6 hwmon: (w83795) Merge w83795_create_files and w83795_remove_files
Functions w83795_create_files and w83795_remove_files iterate over
the same set of files, just calling a different function. Merge them
into a single function which takes the action as a parameter. This
saves code, and also ensure that file creation and deletion are in
sync.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:45 +02:00
Jean Delvare 892514a637 hwmon: (w83795) Move file creation to a separate function too
Function w83795_probe() is way too big, move file creation to a separate
function to make it more readable.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:45 +02:00
Jean Delvare 2fa09878ba hwmon: (w83795) Move files removal to a separate function
Sysfs files must be removed on device removal but also when device
registration fails. Move the code to a separate function to avoid
code redundancy.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:45 +02:00
Jean Delvare 2be381de0f hwmon: (w83795) Improve detection routine
Check for additional identification registers. Improve debugging
messages on failed detection.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:45 +02:00
Jean Delvare b2469f422f hwmon: (w83795) Refactor bank selection
Move the bank selection code to a separate function, to avoid
duplicating it in read and write functions. Improve error reporting
on register access error.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-10-28 20:31:45 +02:00