Commit Graph

129 Commits

Author SHA1 Message Date
Roland Dreier 28638887f3 target: Convert acl_node_lock to be IRQ-disabling
With qla2xxx, acl_node_lock is taken inside qla2xxx's hardware_lock,
which is taken in hardirq context.  This means acl_node_lock must become
an IRQ-disabling lock; in particular this fixes lockdep warnings along
the lines of

    ======================================================
    [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ]

     (&(&se_tpg->acl_node_lock)->rlock){+.....}, at: [<ffffffffa026f872>] transport_deregister_session+0x92/0x140 [target_core_mod]

    and this task is already holding:
     (&(&ha->hardware_lock)->rlock){-.-...}, at: [<ffffffffa017c5e7>] qla_tgt_stop_phase1+0x57/0x2c0 [qla2xxx]
    which would create a new lock dependency:
     (&(&ha->hardware_lock)->rlock){-.-...} -> (&(&se_tpg->acl_node_lock)->rlock){+.....}

    but this new dependency connects a HARDIRQ-irq-safe lock:
     (&(&ha->hardware_lock)->rlock){-.-...}

    to a HARDIRQ-irq-unsafe lock:
     (&(&se_tpg->acl_node_lock)->rlock){+.....}

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-08-22 19:28:36 +00:00
Roland Dreier e63a8e1933 target: Make locking in transport_deregister_session() IRQ safe
At least the tcm_qla2xxx fabric driver calls into transport_deregister_session()
while holding an IRQ-disabled spinlock, so the inner locking needs to
use spin_lock_irqsave() instead of spin_lock_bh().

This fixes warnings seen with tcm_qla2xxx like:

    WARNING: at kernel/softirq.c:159 local_bh_enable_ip+0x98/0xb0()
    Call Trace:
     [<ffffffff8104e65f>] warn_slowpath_common+0x7f/0xc0
     [<ffffffff8104e6ba>] warn_slowpath_null+0x1a/0x20
     [<ffffffff81055368>] local_bh_enable_ip+0x98/0xb0
     [<ffffffff814d5284>] _raw_spin_unlock_bh+0x14/0x20
     [<ffffffffa027b7f6>] transport_deregister_session+0x96/0x180 [target_core_mod]
     [<ffffffffa00f7731>] tcm_qla2xxx_free_session+0xd1/0x170 [tcm_qla2xxx]
     [<ffffffffa01b9173>] qla_tgt_sess_put+0xc3/0x140 [qla2xxx]
     [<ffffffffa01bf40f>] qla_tgt_stop_phase1+0x8f/0x2c0 [qla2xxx]
     [<ffffffffa00f735e>] tcm_qla2xxx_tpg_store_enable+0x6e/0xd0 [tcm_qla2xxx]
     [<ffffffffa026ca29>] target_fabric_tpg_attr_store+0x39/0x40 [target_core_mod]
     [<ffffffffa00a575d>] configfs_write_file+0xbd/0x120 [configfs]
     [<ffffffff811464a6>] vfs_write+0xc6/0x180
     [<ffffffff811467c1>] sys_write+0x51/0x90
     [<ffffffff814dd382>] system_call_fastpath+0x16/0x1b

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-08-22 19:26:33 +00:00
Roland Dreier 4e0f05297f tcm_fc: init/exit functions should not be protected by "#ifdef MODULE"
There's no need for the #ifdef protection when building into the kernel,
and in fact we need the module_init() for the initialization function to
be called.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-08-22 19:26:32 +00:00
Roland Dreier f15ea5780d target: Print subpage too for unhandled MODE SENSE pages
Make a log message more useful by printing both the page and subpage
that an initiator is requesting.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-08-22 19:26:31 +00:00
Dan Carpenter ba77366963 iscsi-target: Fix iscsit_allocate_se_cmd_for_tmr failure path bugs
This patch fixes two bugs in allocation failure handling in
iscsit_allocate_se_cmd_for_tmr():

This first reported by DanC is a free-after call to transport_free_se_cmd(), this
patch drops the transport_free_se_cmd() call all together, as iscsit_release_cmd()
will release existing allocations as expected.

The second is a bug where iscsi_cmd_t was being leaked on a cmd->tmr_req allocation
failure, so make this jump to iscsit_release_cmd() as well.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-08-22 19:26:30 +00:00
Chris Boot 6626a05726 iscsi-target: Implement iSCSI target IPv6 address printing.
The iSCSI target configfs code to print out an initiator's IPv6 address
is not fully implemented. This patch uses snprintf() with the "%pI6c"
format string to format the IPv6 address for display purposes.

Signed-off-by: Chris Boot <bootc@bootc.net>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-08-22 19:26:29 +00:00
Nicholas Bellinger c3c74c7a33 target: Fix task SGL chaining breakage with transport_allocate_data_tasks
This patch fixes two bugs associated with transport_do_task_sg_chain()
operation where transport_allocate_data_tasks() was incorrectly setting
task_padded_sg for all tasks, and causing bogus task->task_sg_nents
assignments + OOPsen with fabrics depending upon this code.  The first bit
here adds a task_sg_nents_padded check in transport_allocate_data_tasks()
to include an extra SGL vector when necessary for tasks that expect to
be linked using sg_chain().

The second change involves making transport_do_task_sg_chain() properly
account for the extra SGL vector when task->task_padded_sg is set for
the non trailing ->task_sg or single ->task_sg allocations.  Note this
patch also removes the BUG_ON(!task->task_padded_sg) check within
transport_do_task_sg_chain() as we expect this to happen normally
with the updated logic in transport_allocate_data_tasks(), along with
being bogus for CONTROL_SG_IO_CDB type payloads.

So far this bugfix has been tested with tcm_qla2xxx and iblock backends
in (task_count > 1)( and (task_count == 1) operation.

Reported-by: Kiran Patil <kiran.patil@intel.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Cc: Andy Grover <agrover@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-08-22 19:26:28 +00:00
Nicholas Bellinger 525a48a21d target: Fix task count > 1 handling breakage and use max_sector page alignment
This patch addresses recent breakage with multiple se_task (task_count > 1)
operation following backend dev->se_sub_dev->se_dev_attrib.max_sectors in new
transport_allocate_data_tasks() code.  The initial bug here was a bogus
task->task_sg_nents assignment in transport_allocate_data_tasks() based on
the passed parameter, which now uses DIV_ROUND_UP(task_size, PAGE_SIZE) to
determine the proper number of per task SGL entries for the (task_count > 1)
case.

This also means we now need to enforce a PAGE_SIZE aligned max_sector count
value for this to work as expected without bringing back the pre v3.1
transport_map_mem_to_sg() logic to handle SGL offsets across multiple tasks.
So this patch adds se_dev_align_max_sectors() to round down max_sectors as
necessary to ensure this alignment via se_dev_set_default_attribs() and
se_dev_align_max_sectors() and keeps it simple for (task_count > 1)
operation.

So far this bugfix has been tested with (task_count > 1) operation
using iscsi-target and iblock backends.

Reported-by: Chris Boot <bootc@bootc.net>
Cc: Kiran Patil <kiran.patil@intel.com>
Cc: Andy Grover <agrover@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-08-22 19:26:27 +00:00
Nicholas Bellinger 01cde4d543 target: Add missing DATA_SG_IO transport_cmd_get_valid_sectors check
This patch adds the missing transport_cmd_get_valid_sectors() check for
SCF_SCSI_DATA_SG_IO_CDB type payloads to ensure that a received LBA + range
does not exeed past the end of associated backend struct se_device.

This patch also fixes a bug in the failure path of transport_new_cmd_obj()
where this check can fail, so change to use a signed 'rc' and return '-EINVAL'
to signal proper transport_generic_request_failure() handling.

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-08-22 19:26:26 +00:00
Nicholas Bellinger 7abbe7f3e4 target: Fix SYNCHRONIZE_CACHE zero LBA + range breakage
This patch fixes a SYNCHRONIZE_CACHE CDB handling bug with IBLOCK/FILEIO
backends where transport_cmd_get_valid_sectors() was incorrectly rejecting
a zero LBA + range CDB from being processed, and returning CHECK_CONDITION.

This includes changing transport_cmd_get_valid_sectors() to return '0' on
success and '-EINVAL' on failure (this makes more sense than sectors),
and to only check transport_cmd_get_valid_sectors() when a non zero LBA +
range SYNCHRONIZE_CACHE operation has been receieved for the non passthrough
case.

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-08-22 19:26:25 +00:00
Nicholas Bellinger 72f4ba1e32 target: Remove duplicate task completions in transport_emulate_control_cdb
This patch removes a duplicate set of transport_complete_task() calls in
target_emulate_unmap() and target_emulate_write_same() as the completion
call is already done within transport_emulate_control_cdb()

This patch also adds a check in transport_emulate_control_cdb() for the
existing SCF_EMULATE_CDB_ASYNC flag currently used by SYNCHRONIZE_CACHE
in order to handle IMMEDIATE processing.

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-08-22 19:26:23 +00:00
Nicholas Bellinger 12850626e2 target: Fix WRITE_SAME usage with transport_get_size
For all flavours of WRITE_SAME, we only expect to handle a single block
of data-out buffer payload, regardless of the number of logical blocks
presented in the CDB.  This patch changes all flavours of WRITE_SAME in
transport_generic_cmd_sequencer() to pass '1' into transport_get_size()
instead of the extracted 'sectors' to properly handle the default usage
of sg_write_same without the --xferlen parameter.

Reported-by: Eric Seppanen <eric@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@risingtidesystems.com>
2011-08-22 19:26:22 +00:00
Nicholas Bellinger 706d586096 target: Add WRITE_SAME (10) parsing and refactor passthrough checks
This patch adds initial WRITE_SAME (10) w/ UNMAP=1 support following updates in
sbcr26 to allow UNMAP=1 for the non 16 + 32 byte CDB case.  It also refactors
current pSCSI passthrough passthrough checks into target_check_write_same_discard()
ahead of UNMAP=0 w/ write payload support into target_core_iblock.c.

This includes the support for handling WRITE_SAME in transport_emulate_control_cdb(),
and converts target_emulate_write_same to accept num_blocks directly for
WRITE_SAME, WRITE_SAME_16 and WRITE_SAME_32.

Reported-by: Eric Seppanen <eric@purestorage.com>
Cc: Roland Dreier <roland@purestorage.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@risingtidesystems.com>
2011-08-22 19:26:21 +00:00
Nicholas Bellinger 16ab8e60a0 target: Fix write payload exception handling with ->new_cmd_map
This patch fixes a bug for fabrics using tfo->new_cmd_map() that
are expect transport_generic_request_failure() to be calling
transport_send_check_condition_and_sense() for both READ and WRITE,
instead of only for READ exceptions.

This was originally observed with a failed WRITE_SAME_16 w/ unmap=0
using tcm_loop.

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-08-22 19:26:20 +00:00
Dan Carpenter 387e96c052 iscsi-target: forever loop bug in iscsit_attach_ooo_cmdsn()
This patch fixes a forever loop bug in iscsit_attach_ooo_cmdsn()
while walking sess->sess_ooo_cmdsn_list when the received
CmdSN is less than the tail of the list.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-08-22 19:26:19 +00:00
Dan Carpenter c2337c7091 iscsi-target: remove duplicate return
We returned on the line before already.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-08-22 19:26:18 +00:00
Julia Lawall 6fc6148865 target: Convert target_core_rd.c to use use BUG_ON
Use BUG_ON(x) rather than if(x) BUG();

The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@ identifier x; @@
-if (x) BUG();
+BUG_ON(x);

@@ identifier x; @@
-if (!x) BUG();
+BUG_ON(!x);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-08-22 19:26:17 +00:00
Jesper Juhl 9be08c5804 iscsi-target: Fix leak on failure in iscsi_copy_param_list()
We leak memory if the allocations for 'new_param->name' or
'new_param->value' fail in iscsi_target_parameters.c::iscsi_copy_param_list()

We also do a lot of variable assignments that are completely pointless
if the allocations fail.

So, let's move the allocations before the assignments and also make
sure that we free whatever was allocated to one if the allocation fail.

There's also some small CodingStyle fixups in there (curly braces on
both branches of if statement, only one variable per line) since I was
in the area anyway. And finally, error messages in the function are
put on a single line for easy grep'abillity.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-08-22 19:26:16 +00:00
Thomas Meyer e1750ba20f target: Use ERR_CAST inlined function
Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...))

The semantic patch that makes this output is available
in scripts/coccinelle/api/err_cast.cocci.

More information about semantic patching is available at
http://coccinelle.lip6.fr/

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-08-22 19:26:15 +00:00
Nicholas Bellinger 052605c6ca target: Make standard INQUIRY return 'not connected' for tpg_virt_lun0
This patch changes target_emulate_inquiry_std() to set the 'not connected'
(0x35) bit in standard INQUIRY response data when we are processing a
request to a virtual LUN=0 mapping from struct se_device *g_lun0_dev that
have been setup for us in transport_lookup_cmd_lun().

This addresses an issue where qla2xxx FC clients need to be able
to create demo-mode I_T FC Nexuses by default, but should not be
exposing the default set of TPG LUNs to all FC clients.  This includes
adding an new optional target_core_fabric_ops->tpg_check_demo_mode_login_only()
caller to allow demo_mode nexuses to skip the old default of bulding
a demo-mode MappedLUNs list via core_tpg_add_node_to_devs().

(roland: Add missing tpg_check_demo_mode_login_only check in core_dev_add_lun)

Reported-by: Roland Dreier <roland@purestorage.com>
Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@risingtidesystems.com>
2011-08-22 19:25:35 +00:00
Nicholas Bellinger eb39d34004 target: Change TCM_NON_EXISTENT_LUN response to ASC=LOGICAL UNIT NOT SUPPORTED
This patch changes transport_send_check_condition_and_sense() for
TCM_NON_EXISTENT_LUN emulation to use 0x25 (LOGICAL UNIT NOT SUPPORTED)
instead of the original 0x20 (INVALID COMMAND OPERATION CODE).  This is
helpful to distinguish between TCM_UNSUPPORTED_SCSI_OPCODE ASC=0x20
exceptions.

Signed-off-by: Nicholas A. Bellinger <nab@risingtidesystems.com>
2011-08-17 00:50:02 +00:00
Linus Torvalds a9e4e6e14c Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  tcm_fc: Handle DDP/SW fc_frame_payload_get failures in ft_recv_write_data
  target: Fix bug for transport_generic_wait_for_tasks with direct operation
  target: iscsi_target depends on NET
  target: Fix WRITE_SAME_16 lba assignment breakage
  MAINTAINERS: Add target-devel list for drivers/target/
  iscsi-target: Fix CONFIG_SMP=n and CONFIG_MODULES=n build failure
  iscsi-target: Fix snprintf usage with MAX_PORTAL_LEN
  iscsi-target: Fix uninitialized usage of cmd->pad_bytes
  iscsi-target: strlen() doesn't count the terminator
  iscsi-target: Fix NULL dereference on allocation failure
2011-08-03 15:12:09 -10:00
Kiran Patil dcd998ccdb tcm_fc: Handle DDP/SW fc_frame_payload_get failures in ft_recv_write_data
Problem: HW DDP context was not invalidated in case of ABORTS, etc...
This leads to the problem where memory pages which are used for DDP
as user descriptor could get reused for some other purpose (such as to
satisfy new memory allocation request either by kernel or user mode threads)
and since HW DDP context was not invalidated, HW continue to write to
those pages, hence causing memory corruption.

Fix: Either on incoming ABORTS or due to exchange time out, allowed the
target to cleanup HW DDP context if it was setup for respective ft_cmd.
Added new function to perform this cleanup, furthur it can be enhanced
for other cleanup activity.  Fix ft_recv_write_data() to properly handle
fc_frame_payload_get to return pointer to payload if it exist. If there is
no payload which is most common case (+ve case in case if DDP is working
as expected, it will return NULL. Yes, scope of buf is limited to printk.
Invalidation of HW context (which is done inside ft_invl_hw_context() is
necessary in SUCCESS and FAILURE case of DDP. Hence invalidation is DONE
as long as there was DDP setup (whether it worked correctly or not,

NOTE: For some reason, if there is any error w.r.t DDP such as out of
order packet reception, HW simply post the full packet in rx queue.

Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Cc: Robert W Love <robert.w.love@intel.com>
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-08-03 09:38:21 +00:00
Nicholas Bellinger dd8ae59d48 target: Fix bug for transport_generic_wait_for_tasks with direct operation
This patch fixes a bug in transport_handle_cdb_direct() usage with target_core
where transport_generic_wait_for_tasks() was bypassing active I/O + usage of
cmd->t_transport_stop_comp because cmd->t_transport_active=1 was not being set
before dispatching with transport_generic_new_cmd().  The fix follows existing
usage in transport_generic_handle_cdb*() -> transport_add_cmd_to_queue() and
set these directly, as well as handle transport_generic_new_cmd() exceptions
for QUEUE_FULL and CHECK_CONDITION instead of propigating up to RX context
fabric code.

The bug was manifesting itself with the following SLUB poison overwritten
warnings with iscsi-target v4.1 LUNs using the new process context direct
operation during session reinstatement with active I/O exception handling:

[885410.498267] =============================================================================
[885410.621622] BUG lio_cmd_cache: Poison overwritten
[885410.621791] -----------------------------------------------------------------------------
[885410.621792]
[885410.623420] INFO: 0xffff880000cf3750-0xffff880000cf378d. First byte 0x6a instead of 0x6b
[885410.626332] INFO: Allocated in iscsit_allocate_cmd+0x1c/0xd4 [iscsi_target_mod] age=345 cpu=1 pid=22554
[885411.855189] INFO: Freed in iscsit_release_cmd+0x208/0x217 [iscsi_target_mod] age=1410 cpu=1 pid=22554
[885411.856048] INFO: Slab 0xffffea000002d480 objects=22 used=0 fp=0xffff880000cf7300 flags=0x4080
[885411.856368] INFO: Object 0xffff880000cf33c0 @offset=13248 fp=0xffff880000cf6780

<SNIP>

[885411.955678] Pid: 22554, comm: iscsi_trx Not tainted 3.0.0-rc7+ #30
[885411.956040] Call Trace:
[885411.957029]  [<ffffffff810e5cf9>] print_trailer+0x12e/0x137
[885412.752879]  [<ffffffff810e61d9>] check_bytes_and_report+0xb9/0xfd
[885412.754933]  [<ffffffff810e62d2>] check_object+0xb5/0x192
[885412.755099]  [<ffffffff810e6445>] __free_slab+0x96/0x13a
[885412.757008]  [<ffffffff810e652a>] discard_slab+0x41/0x43
[885412.758171]  [<ffffffff810e7a4c>] __slab_free+0xf3/0xfe
[885412.761027]  [<ffffffffa030a536>] ? iscsit_release_cmd+0x208/0x217 [iscsi_target_mod]
[885412.761354]  [<ffffffff810e7e95>] kmem_cache_free+0x6f/0xac
[885412.761536]  [<ffffffffa030a536>] iscsit_release_cmd+0x208/0x217 [iscsi_target_mod]
[885412.762056]  [<ffffffffa020e467>] ? iblock_free_task+0x34/0x39 [target_core_iblock]
[885412.762368]  [<ffffffffa0314131>] lio_release_cmd+0x10/0x12 [iscsi_target_mod]
[885412.764129]  [<ffffffffa02c2254>] transport_release_cmd+0x2f/0x33 [target_core_mod]
[885412.805024]  [<ffffffffa02c230e>] transport_generic_remove+0xb6/0xc3 [target_core_mod]
[885412.806424]  [<ffffffff81035b5f>] ? try_to_wake_up+0x1bd/0x1bd
[885412.809033]  [<ffffffffa02c241f>] transport_generic_free_cmd+0x75/0x7d [target_core_mod]
[885412.810066]  [<ffffffffa02c2643>] transport_generic_wait_for_tasks+0x21c/0x22b [target_core_mod]
[885412.811056]  [<ffffffff8139f0b1>] ? mutex_lock+0x11/0x32
[885412.813059]  [<ffffffff8139f0b1>] ? mutex_lock+0x11/0x32
[885412.813200]  [<ffffffffa030b81d>] iscsit_close_connection+0x1d5/0x63a [iscsi_target_mod]
[885412.813517]  [<ffffffffa0300a82>] iscsit_take_action_for_connection_exit+0xdb/0xe0 [iscsi_target_mod]
[885412.813851]  [<ffffffffa03111e9>] iscsi_target_rx_thread+0x11f6/0x1221 [iscsi_target_mod]
[885412.829024]  [<ffffffff81033e8d>] ? pick_next_task_fair+0xbe/0x10e
[885412.831010]  [<ffffffffa030fff3>] ? iscsit_handle_scsi_cmd+0x91d/0x91d [iscsi_target_mod]
[885412.833011]  [<ffffffffa030fff3>] ? iscsit_handle_scsi_cmd+0x91d/0x91d [iscsi_target_mod]
[885412.835010]  [<ffffffff8105388a>] kthread+0x7d/0x85
[885412.837022]  [<ffffffff813a7124>] kernel_thread_helper+0x4/0x10
[885412.838008]  [<ffffffff8105380d>] ? kthread_worker_fn+0x145/0x145
[885412.840047]  [<ffffffff813a7120>] ? gs_change+0x13/0x13
[885412.842007] FIX lio_cmd_cache: Restoring 0xffff880000cf3750-0xffff880000cf378d=0x6

Cc: Christoph Hellwig <hch@lst.de>
Cc: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-30 12:01:25 +00:00
Randy Dunlap d52a10d003 target: iscsi_target depends on NET
iscsi target code uses lots on network interface functions, so it
should depend on NET.  Fixes many build errors when NET is not enabled:

ERROR: "kernel_sendmsg" [drivers/target/iscsi/iscsi_target_mod.ko] undefined!
ERROR: "in_aton" [drivers/target/iscsi/iscsi_target_mod.ko] undefined!
ERROR: "sock_release" [drivers/target/iscsi/iscsi_target_mod.ko] undefined!
ERROR: "kernel_listen" [drivers/target/iscsi/iscsi_target_mod.ko] undefined!
ERROR: "kernel_setsockopt" [drivers/target/iscsi/iscsi_target_mod.ko] undefined!
ERROR: "kernel_recvmsg" [drivers/target/iscsi/iscsi_target_mod.ko] undefined!
ERROR: "kernel_accept" [drivers/target/iscsi/iscsi_target_mod.ko] undefined!
ERROR: "sock_create" [drivers/target/iscsi/iscsi_target_mod.ko] undefined!
ERROR: "kernel_bind" [drivers/target/iscsi/iscsi_target_mod.ko] undefined!
ERROR: "in6_pton" [drivers/target/iscsi/iscsi_target_mod.ko] undefined!

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-28 20:16:18 +00:00
Nicholas Bellinger 5db0753ba5 target: Fix WRITE_SAME_16 lba assignment breakage
This patch fixes a bug in WRITE_SAME_16 LBA assignment where get_unaligned_be16()
is incorrectly being used instead of get_unaligned_be64() for a 64-bit LBA.

This was introduced with:

commit a1d8b49abd
Author: Andy Grover <agrover@redhat.com>
Date:   Mon May 2 17:12:10 2011 -0700

    target: Updates from AGrover and HCH (round 3)

    (target: inline struct se_transport_task into struct se_cmd)

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-28 06:14:49 +00:00
Nicholas Bellinger aadcec0101 iscsi-target: Fix CONFIG_SMP=n and CONFIG_MODULES=n build failure
This patch fixes the following CONFIG_SMP=n and CONFIG_MODULES=n build
failure, because iscsit_thread_get_cpumask() is defined as a macro in
iscsi_target.c, but needed by iscsi_target_login.c

drivers/built-in.o: In function `iscsi_post_login_handler':
iscsi_target_login.c:(.text+0x13a315): undefined reference to `iscsit_thread_get_cpumask'
iscsi_target_login.c:(.text+0x13a4b4): undefined reference to `iscsit_thread_get_cpumask'
make: *** [.tmp_vmlinux1] Error 1

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-27 20:28:49 +00:00
Nicholas Bellinger 7bbb654e9c iscsi-target: Fix snprintf usage with MAX_PORTAL_LEN
This patch makes lio_target_call_addnptotpg() use sprintf() with
MAX_PORTAL_LEN + 1 to address the following smatch warning:

drivers/target/iscsi/iscsi_target_configfs.c +184 lio_target_call_addnptotpg(21)
        error: snprintf() chops off the last chars of 'name': 257 vs 256

Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-27 20:28:38 +00:00
Nicholas Bellinger 76f1928e88 iscsi-target: Fix uninitialized usage of cmd->pad_bytes
This patch fixes an uninitialized usage of cmd->pad_bytes inside of
iscsit_handle_text_cmd() introduced during a v4.1 change to use cmd
members instead of local pad_bytes variables.

Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-27 20:28:31 +00:00
Dan Carpenter 8f50c7f5d6 iscsi-target: strlen() doesn't count the terminator
This patch fixes an off by one check in iscsit_add_tiqn() because the
NULL terminator isn't taken into consideration.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-27 20:28:16 +00:00
Dan Carpenter 4a28a3fa8c iscsi-target: Fix NULL dereference on allocation failure
This patch fixes a bug in iscsi_target_init_negotiation() where
the "goto out" path dereferences "login" which is NULL upon a
memory allocation failure.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-27 20:28:04 +00:00
Linus Torvalds 91d41fdf31 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target: Convert to DIV_ROUND_UP_SECTOR_T usage for sectors / dev_max_sectors
  kernel.h: Add DIV_ROUND_UP_ULL and DIV_ROUND_UP_SECTOR_T macro usage
  iscsi-target: Add iSCSI fabric support for target v4.1
  iscsi: Add Serial Number Arithmetic LT and GT into iscsi_proto.h
  iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]
  iscsi: Resolve iscsi_proto.h naming conflicts with drivers/target/iscsi
2011-07-27 13:21:40 -07:00
Nicholas Bellinger 277c5f27a2 target: Convert to DIV_ROUND_UP_SECTOR_T usage for sectors / dev_max_sectors
This patch adds the new macro usage of include/linux/kernel.h:DIV_ROUND_UP_SECTOR_T
for the new DIV_ROUND_UP_ULL() usage for 32-bit architectures with unsigned long long
sector_t division in transport_allocate_data_tasks() usage for target_core_mod v4.1

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-26 09:40:34 +00:00
Nicholas Bellinger e48354ce07 iscsi-target: Add iSCSI fabric support for target v4.1
The Linux-iSCSI.org target module is a full featured in-kernel
software implementation of iSCSI target mode (RFC-3720) for the
current WIP mainline target v4.1 infrastructure code for the v3.1
kernel.  More information can be found here:

http://linux-iscsi.org/wiki/ISCSI

This includes support for:

   * RFC-3720 defined request / response state machines and support for
     all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi
     include/scsi/iscsi_proto.h PDU definitions
   * Target v4.1 compatible control plane using the generic layout in
     target_core_fabric_configfs.c and fabric dependent attributes
     within /sys/kernel/config/target/iscsi/ subdirectories.
   * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS)
   * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs
   * iSCSI Error Recovery Hierarchy support
   * Per iSCSI connection RX/TX thread pair scheduling affinity
   * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto
   * CHAP Authentication support using libcrypto
   * Conversion to use internal SGl allocation with iscsit_alloc_buffs() ->
     transport_generic_map_mem_to_cmd()

(nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit:
      iscsi: Use struct scsi_lun in iscsi structs instead of u8[8])
(nab: Fix 32-bit compile warnings)

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andy Grover <agrover@redhat.com>
Acked-by: Roland Dreier <roland@kernel.org>
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-26 09:16:43 +00:00
Linus Torvalds d3ec4844d4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
  fs: Merge split strings
  treewide: fix potentially dangerous trailing ';' in #defined values/expressions
  uwb: Fix misspelling of neighbourhood in comment
  net, netfilter: Remove redundant goto in ebt_ulog_packet
  trivial: don't touch files that are removed in the staging tree
  lib/vsprintf: replace link to Draft by final RFC number
  doc: Kconfig: `to be' -> `be'
  doc: Kconfig: Typo: square -> squared
  doc: Konfig: Documentation/power/{pm => apm-acpi}.txt
  drivers/net: static should be at beginning of declaration
  drivers/media: static should be at beginning of declaration
  drivers/i2c: static should be at beginning of declaration
  XTENSA: static should be at beginning of declaration
  SH: static should be at beginning of declaration
  MIPS: static should be at beginning of declaration
  ARM: static should be at beginning of declaration
  rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check
  Update my e-mail address
  PCIe ASPM: forcedly -> forcibly
  gma500: push through device driver tree
  ...

Fix up trivial conflicts:
 - arch/arm/mach-ep93xx/dma-m2p.c (deleted)
 - drivers/gpio/gpio-ep93xx.c (renamed and context nearby)
 - drivers/net/r8169.c (just context changes)
2011-07-25 13:56:39 -07:00
Linus Torvalds d4e06701b8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (77 commits)
  [SCSI] fix crash in scsi_dispatch_cmd()
  [SCSI] sr: check_events() ignore GET_EVENT when TUR says otherwise
  [SCSI] bnx2i: Fixed kernel panic due to illegal usage of sc->request->cpu
  [SCSI] bfa: Update the driver version to 3.0.2.1
  [SCSI] bfa: Driver and BSG enhancements.
  [SCSI] bfa: Added support to query PHY.
  [SCSI] bfa: Added HBA diagnostics support.
  [SCSI] bfa: Added support for flash configuration
  [SCSI] bfa: Added support to obtain SFP info.
  [SCSI] bfa: Added support for CEE info and stats query.
  [SCSI] bfa: Extend BSG interface.
  [SCSI] bfa: FCS bug fixes.
  [SCSI] bfa: DMA memory allocation enhancement.
  [SCSI] bfa: Brocade-1860 Fabric Adapter vHBA support.
  [SCSI] bfa: Brocade-1860 Fabric Adapter PLL init fixes.
  [SCSI] bfa: Added Fabric Assigned Address(FAA) support
  [SCSI] bfa: IOC bug fixes.
  [SCSI] bfa: Enable ASIC block configuration and query.
  [SCSI] bnx2i: Updated copyright and bump version
  [SCSI] bnx2i: Modified to skip CNIC registration if iSCSI is not supported
  ...

Fix up some trivial conflicts in:
 - drivers/scsi/bnx2fc/{bnx2fc.h,bnx2fc_fcoe.c}:
	Crazy broadcom version number conflicts
 - drivers/target/tcm_fc/tfc_cmd.c
	Just trivial cleanups done on adjacent lines
2011-07-23 11:13:11 -07:00
Andy Shevchenko 11650b8596 target: remove custom hex2bin() implementation
This patch drops transport_asciihex_to_binaryhex() in favor of proper
hex2bin usage from include/linux/kernel.h:hex2bin()

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-22 09:37:49 +00:00
Andy Shevchenko 163cd5fa9f target: fix typo Assoication -> Association
Additionally this patch brings proper apply of the designator type.
However, the original code luckily has no bug, because the association
equals to 0.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: James Bottomley <jbottomley@parallels.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-22 09:37:49 +00:00
Nicholas Bellinger 5de619a31d target: Update QUEUE ALGORITHM MODIFIER control page default
This patch adds the default 'Unrestricted reordering allowed' for SCSI
control mode page QUEUE ALGORITHM MODIFIER on a per se_device basis in
target_modesense_control() following spc4r23.  This includes a new
emuluate_rest_reord configfs attribute that currently (only) accepts
zero to signal 'Unrestricted reordering allowed' in control mode page
usage by the backend target device.

Reported-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@risingtidesystems.com>
2011-07-22 09:37:49 +00:00
Nicholas Bellinger 1d20bb6147 target: ->map_task_SG conversion to ->map_control_SG and ->map_data_SG
This patch breaks up the ->map_task_SG() backend call into two seperate
->map_control_SG() and ->map_data_SG() in order to better address
IBLOCK and pSCSI.  IBLOCK only allocates bios for ->map_data_SG(), and
pSCSI will allocate a struct request for both cases.

This patch fixes incorrect usage of ->map_task_SG() for all se_cmd descriptors
in transport_generic_new_cmd() by moving the call into it's proper location
directly inside of transport_allocate_data_tasks()

Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-22 09:37:48 +00:00
Andy Grover 6708bb27bb target: Follow up core updates from AGrover and HCH (round 4)
This patch contains the squashed version of forth round series cleanups
from Andy and Christoph following the post heavy lifting in the preceeding:
'Eliminate usage of struct se_mem' and 'Make all control CDBs scatter-gather'
changes.  This also includes a conversion of target core and the v3.0
mainline fabric modules (loopback and tcm_fc) to use pr_debug and the
CONFIG_DYNAMIC_DEBUG infrastructure!

These have been squashed into this third and final round for v3.1.

target: Remove ifdeffed code in t_g_process_write
target: Remove direct ramdisk code
target: Rename task_sg_num to task_sg_nents
target: Remove custom debug macros for pr_debug. Use pr_err().
target: Remove custom debug macros in mainline fabrics
target: Set WSNZ=1 in block limits VPD. Abort if WRITE_SAME sectors = 0
target: Remove transport do_se_mem_map callback
target: Further simplify transport_free_pages
target: Redo task allocation return value handling
target: Remove extra parentheses
target: change alloc_task call to take *cdb, not *cmd

(nab: Fix bogus struct file assignments in fd_do_readv and fd_do_writev)

Signed-off-by: Andy Grover <agrover@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-22 09:37:48 +00:00
Andy Grover ec98f7825c target: Eliminate usage of struct se_mem
Both backstores and fabrics use arrays of struct scatterlist to describe
data buffers. However TCM used struct se_mems, basically a linked list
of scatterlist entries. We are able to simplify the code by eliminating
this intermediate data structure and just using struct scatterlist[]
throughout.

Also, moved attachment of task to cmd out of transport_generic_get_task
and into allocate_control_task and allocate_data_tasks. The reasoning
is that it's nonintuitive that get_task should automatically add it to
the cmd's task list -- it should just return an allocated, initialized
task. That's all it should do, based on the function's name, so either the
function shouldn't do it, or the name should change to encapsulate the
entire essence of what it does.

(nab: Fix compile warnings in tcm_fc, and make transport_kmap_first_data_page
 honor sg->offset for SGLs from contigious memory with TCM_Loop, and
 fix control se_cmd descriptor memory leak)

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-22 09:37:48 +00:00
Andy Grover 3a86720567 target: Pass 2nd param of transport_split_cdb by value
Since sectors is not modified, it's more straightforward to do this.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-22 09:37:48 +00:00
Andy Grover d0229ae3fe target: Enforce 1 page max for control cdb buffer sizes
Due to all cdbs' data buffers being referenced by scatterlists, buffers
of more than a page are not contiguous. Instead of handling this in all
control command handlers, we may be able to get away with just limiting
control cdb data buffers to one page. The only control CDBs we handle that
have potentially large data buffers are REPORT LUNS and UNMAP, so if we
didn't want to live with this limitation, they would need to be modified
to walk the pages in the data buffer's sgl.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-22 09:37:48 +00:00
Andy Grover 05d1c7c0d0 target: Make all control CDBs scatter-gather
Previously, some control CDBs did not allocate memory in pages for their
data buffer, but just did a kmalloc. This patch makes all cdbs allocate
pages.

This has the benefit of streamlining some paths that had to behave
differently when we used two allocation methods. The downside is that
all accesses to the data buffer need to kmap it before use, and need to
handle data in page-sized chunks if more than a page is needed for a given
command's data buffer.

Finally, note that cdbs with no data buffers are handled a little
differently. Before, SCSI_NON_DATA_CDBs would not call get_mem at all
(they'd be in the final else in transport_allocate_resources) but now
these will make it into generic_get_mem, but just not allocate any
buffers.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-22 09:37:48 +00:00
Roland Dreier e22a7f0752 target: Implement Block Device Characteristics VPD page
Implement page B1h, Block Device Characteristics, so that we can report
a medium rotation rate of 1 (non-rotating / solid state) if the
is_nonrot device attribute is set; we update the iblock backend to set
this attribute if the underlying Linux block device has its nonrot
flag set.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-22 09:37:47 +00:00
Roland Dreier b2eb705e00 target: Fix reporting of supported VPD pages
The current handling of VPD page 00h (Supported VPD Pages) for INQUIRY
commands has a couple of problems:

 - The page length field is incorrectly set to 3, so the entry for 86h
   (Extended INQUIRY Data) is ignored since it is in the fourth slot.
 - Even though the code handles pages B0h and B2h, those pages aren't
   mentioned in the Supported VPD Pages list, so eg the Linux SCSI stack
   won't actually try to use them.

Fix these problems and make things more robust to avoid future problems
by moving to a table of supported VPD pages, which means that any added
VPD page support will automatically get reported on page 0.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-22 09:37:47 +00:00
Roland Dreier f5fbed8569 target: Allow for built-in target modules
In target_fabric_configfs_init(), we should allow fabric_mod to be NULL,
since THIS_MODULE is NULL for built-in modules.  The main method of
using the target code may be as modules, but having everything built-in
is useful eg to be able to do quick testing with "qemu -kernel".

In any case, we shouldn't bomb out fabric registration for a perfectly
valid configuration, so simply drop the check of fabric_mod.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2011-07-22 09:37:47 +00:00
Nicholas Bellinger 2be18149d9 tcm_fc: Convert to wake_up_process and schedule_timeout_interruptible
This patch converts ft_queue_cmd() to use wake_up_process() and
ft_thread() to use schedule_timeout_interruptible(MAX_SCHEDULE_TIMEOUT)
instead of wait_event_interruptible().  This fixes a potential race with
the wait_event_interruptible() conditional with qobj->queue_cnt in
ft_thread().

This patch also drops the unnecessary set_user_nice(current, -20) in
ft_thread(), and drops extra () around two if (!(acl)) conditionals in
tfc_conf.c.

Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-22 09:37:47 +00:00
Nicholas Bellinger a1fa375958 tcm_fc: Makefile cleanups
This patch removes the unnecessary EXTRA_CFLAGS includes, and drops the
unused -DTCM_FC_DEBUG define.

Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-22 09:37:47 +00:00