Commit Graph

87 Commits

Author SHA1 Message Date
Maurizio Lombardi 14cee5b4de fnic: move printk()s outside of the critical code section.
This patch moves a printk() outside of the code section where interrupt
are disabled. In some cases a flood of error messages may cause a kernel
panic.  It also removes one of the printk()s because the same error
message was printed twice.

[709686.317197] Kernel panic - not syncing: Watchdog detected hard LOCKUP on cpu 12
[709686.317200] CPU: 12 PID: 1963 Comm: systemd-journal Tainted: GF          O--------------   3.10.0-229.el7.x86_64 #1
[709686.317201] Hardware name: Cisco Systems Inc UCSB-B200-M3/UCSB-B200-M3, BIOS B200M3.2.2.3.6.030620151309 03/06/2015
[709686.317206]  ffffffff8182b2e8 00000000392722ba ffff88046fcc5c48 ffffffff81603f36
[709686.317209]  ffff88046fcc5cc8 ffffffff815fd7da 0000000000000010 ffff88046fcc5cd8
[709686.317211]  ffff88046fcc5c78 00000000392722ba ffff88046fcc5c88 000000000000000c
[709686.317212] Call Trace:
[709686.317221]  <NMI>  [<ffffffff81603f36>] dump_stack+0x19/0x1b
[709686.317223]  [<ffffffff815fd7da>] panic+0xd8/0x1e7
[709686.317227]  [<ffffffff8110a760>] ? watchdog_enable_all_cpus.part.2+0x40/0x40
[709686.317229]  [<ffffffff8110a822>] watchdog_overflow_callback+0xc2/0xd0
[709686.317233]  [<ffffffff8114c901>] __perf_event_overflow+0xa1/0x250
[709686.317235]  [<ffffffff8114d404>] perf_event_overflow+0x14/0x20
[709686.317239]  [<ffffffff810301fd>] intel_pmu_handle_irq+0x1fd/0x410
[709686.317242]  [<ffffffff811908d1>] ? unmap_kernel_range_noflush+0x11/0x20
[709686.317246]  [<ffffffff81373574>] ? ghes_copy_tofrom_phys+0x124/0x210
[709686.317249]  [<ffffffff8160cfcb>] perf_event_nmi_handler+0x2b/0x50
[709686.317251]  [<ffffffff8160c719>] nmi_handle.isra.0+0x69/0xb0
[709686.317252]  [<ffffffff8160c830>] do_nmi+0xd0/0x340
[709686.317256]  [<ffffffff8160bb71>] end_repeat_nmi+0x1e/0x2e
[709686.317260]  [<ffffffff812e24fd>] ? memcpy+0xd/0x110
[709686.317263]  [<ffffffff812e24fd>] ? memcpy+0xd/0x110
[709686.317265]  [<ffffffff812e24fd>] ? memcpy+0xd/0x110
[709686.317269]  <<EOE>>  [<ffffffff8132c297>] ? vgacon_scroll+0x2d7/0x330
[709686.317273]  [<ffffffff813a086c>] scrup+0xfc/0x110
[709686.317275]  [<ffffffff813a0920>] lf+0xa0/0xb0
[709686.317278]  [<ffffffff813a1b32>] vt_console_print+0x2d2/0x420
[709686.317283]  [<ffffffff8106f4a1>] call_console_drivers.constprop.15+0x91/0xf0
[709686.317287]  [<ffffffff8107069f>] console_unlock+0x3bf/0x400
[709686.317291]  [<ffffffff81070996>] vprintk_emit+0x2b6/0x530
[709686.317294]  [<ffffffff815fd961>] printk_emit+0x44/0x5b
[709686.317297]  [<ffffffff81070d98>] devkmsg_writev+0x158/0x1d0
[709686.317303]  [<ffffffff811c5ef9>] do_sync_readv_writev+0x79/0xd0
[709686.317307]  [<ffffffff811c73ee>] do_readv_writev+0xce/0x260
[709686.317310]  [<ffffffff811c8d18>] ? __sb_start_write+0x58/0x110
[709686.317314]  [<ffffffff811c7615>] vfs_writev+0x35/0x60
[709686.317318]  [<ffffffff811c776c>] SyS_writev+0x5c/0xd0
[709686.317322]  [<ffffffff81613da9>] system_call_fastpath+0x16/0x1b

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-03-18 15:28:17 -04:00
Christoph Hellwig 64d513ac31 scsi: use host wide tags by default
This patch changes the !blk-mq path to the same defaults as the blk-mq
I/O path by always enabling block tagging, and always using host wide
tags.  We've had blk-mq available for a few releases so bugs with
this mode should have been ironed out, and this ensures we get better
coverage of over tagging setup over different configs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-11-09 17:11:57 -08:00
Maurizio Lombardi fd6ddfa4c1 fnic: check pci_map_single() return value
the kernel prints some warnings when compiled with CONFIG_DMA_API_DEBUG.
This is because the fnic driver doesn't check the return value of
pci_map_single().

[   11.942770] scsi host12: fnic
[   11.950811] ------------[ cut here ]------------
[   11.950818] WARNING: at lib/dma-debug.c:937 check_unmap+0x47b/0x920()
[   11.950821] fnic 0000:0c:00.0: DMA-API: device driver failed to check map error[device address=0x0000002020a30040] [size=44 bytes] [mapped as single]

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed By: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-10-27 11:05:45 +09:00
Hiral Shah db196935d9 fnic: Use the local variable instead of I/O flag to acquire io_req_lock in fnic_queuecommand() to avoid deadloack
We added changes in fnic driver patch 1.6.0.16 to acquire
io_req_lock in fnic_queuecommand() before issuing I/O so that io completion
is serialized. But when releasing the lock we check for the I/O flag and
this could be modified if IO abort occurs before I/O completion. In this case
we wont release the lock and causes deadlock in some scenerios. Using the
local variable to check the IO lock status will resolve the problem.

Fixes: 41df7b02db
Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Anil Chintalapati <achintal@cisco.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-18 08:11:23 -07:00
Stephen Rothwell d6472302f2 x86/mm: Decouple <linux/vmalloc.h> from <asm/io.h>
Nothing in <asm/io.h> uses anything from <linux/vmalloc.h>, so
remove it from there and fix up the resulting build problems
triggered on x86 {64|32}-bit {def|allmod|allno}configs.

The breakages were triggering in places where x86 builds relied
on vmalloc() facilities but did not include <linux/vmalloc.h>
explicitly and relied on the implicit inclusion via <asm/io.h>.

Also add:

  - <linux/init.h> to <linux/io.h>
  - <asm/pgtable_types> to <asm/io.h>

... which were two other implicit header file dependencies.

Suggested-by: David Miller <davem@davemloft.net>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
[ Tidied up the changelog. ]
Acked-by: David Miller <davem@davemloft.net>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Colin Cross <ccross@android.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: James E.J. Bottomley <JBottomley@odin.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Kristen Carlson Accardi <kristen@linux.intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Suma Ramars <sramars@cisco.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-03 12:02:00 +02:00
Anil Chintalapati (achintal) efc7a28838 fnic: IOMMU Fault occurs when IO and abort IO is out of order
When I/O is aborted by mid-layer, fnic FW will complete the I/O before
completing the abort task. In some cases abort request is completed before
the I/O, which could lead to inconsistent driver and firmware states.
In this case firmware reset would clear the inconsistent state.

Signed-off-by: Anil Chintalapati <achintal@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-30 13:31:45 +01:00
Christoph Hellwig efc3c1df5f scsi: remove ->change_queue_type method
Since we got rid of ordered tag support in 2010 the prime use case of
switching on and off ordered tags has been obsolete.  The other function
of enabling/disabling tagging entirely has only been correctly implemented
by the 53c700 driver and isn't generally useful.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-12-04 09:55:45 +01:00
Christoph Hellwig db5ed4dfd5 scsi: drop reason argument from ->change_queue_depth
Drop the now unused reason argument from the ->change_queue_depth method.
Also add a return value to scsi_adjust_queue_depth, and rename it to
scsi_change_queue_depth now that it can be used as the default
->change_queue_depth implementation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-24 14:45:27 +01:00
Christoph Hellwig c40ecc12cf scsi: avoid ->change_queue_depth indirection for queue full tracking
All drivers use the implementation for ramping the queue up and down, so
instead of overloading the change_queue_depth method call the
implementation diretly if the driver opts into it by setting the
track_queue_depth flag in the host template.

Note that a few drivers validated the new queue depth in their
change_queue_depth method, but as we never go over the queue depth
set during slave_configure or the sysfs file this isn't nessecary
and can safely be removed.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Venkatesh Srinivas <venkateshs@google.com>
2014-11-24 14:45:12 +01:00
Hiral Shah 41df7b02db Fnic: Fnic Driver crashed with NULL pointer reference
When issuing I/O request, if the I/O completes before returning from
fnic_queuecommand(), we may be referencing scsi_cmnd structure that may
be freed by interrupt handler. Acquring IO lock would synchronize
fnic_queuecommand and interrupt handler.

- Increment fnic version from 1.6.0.15 to 1.6.0.16

Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Anil Chintalapati <achintal@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-20 09:11:00 +01:00
Hiral Shah 0ee7b8714d Fnic: For Standalone C series, "sending VLAN request" message seen even if the link is down
When physical link between standalone C series and switch is down,
the fip timer is not turned off and timer expiration will keep sending
vlan request.

It can be fixed by stopping the fip_timer and
it will be restarted automatically when Link is up.

- Increment fnic version from 1.6.0.14 to 1.6.0.15

Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Anil Chintalapati <achintal@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-20 09:10:51 +01:00
Hiral Shah 35061e21a1 Fnic: Improper resue of exchange Ids
IOs belonging to an rport are aborted with Internal terminate option
when rport goes offline. Any new IO issued to the rport during this
time can reuse the terminated exchange which will cause inconsistent
state of the exchange between local port and remote port.

fc_rport_priv is set to RPORT_ST_DELETE before exchanges are aborted by
libfc. Not issuing amy more I/O requests when RPORT_ST_DELETE is set,
will avoid inconsistent state of the exchange between local port and
remote port.

- Increment fnic version from 1.6.0.13 to 1.6.0.14

Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Anil Chintalapati <achintal@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-20 09:10:39 +01:00
Hiral Shah 042b356a5f Fnic: Memcopy only mimumum of data or trace buffer
In case of receive path, we do not have eth header or fcoe header available
when we take a trace so we fill the fc trace buffer with 0xff for both
values. We copy only mimimum of received data or trace buffer size -
fc header - eth and fcoe header

- Increment fnic version from 1.6.0.12 to 1.6.0.13

Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Anil Chintalapati <achintal@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-20 09:10:23 +01:00
Hiral Shah a232bfbe19 Fnic: Not probing all the vNICS via fnic_probe on boot
In fnic_dev_wait, Wait for finish to complete at least three times in two
seconds while loop before returning -ETIMEDOUT as sometime
schedule_timeout_uninterruptible takes more than two seconds to wake up.

- Increment fnic version from 1.6.0.11 to 1.6.0.12

Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Anil Chintalapati <achintal@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-20 09:10:08 +01:00
Christoph Hellwig ee11560f3a scsi: don't force tagged_supported in drivers
Now that we also get proper values in cmd->request->tag for untagged
commands, there is no need to force tagged_supported to on in drivers
that need host-wide tags.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12 11:19:44 +01:00
Christoph Hellwig c8b09f6fb6 scsi: don't set tagging state from scsi_adjust_queue_depth
Remove the tagged argument from scsi_adjust_queue_depth, and just let it
handle the queue depth.  For most drivers those two are fairly separate,
given that most modern drivers don't care about the SCSI "tagged" status
of a command at all, and many old drivers allow queuing of multiple
untagged commands in the driver.

Instead we start out with the ->simple_tags flag set before calling
->slave_configure, which is how all drivers actually looking at
->simple_tags except for one worke anyway.  The one other case looks
broken, but I've kept the behavior as-is for now.

Except for that we only change ->simple_tags from the ->change_queue_type,
and when rejecting a tag message in a single driver, so keeping this
churn out of scsi_adjust_queue_depth is a clear win.

Now that the usage of scsi_adjust_queue_depth is more obvious we can
also remove all the trivial instances in ->slave_alloc or ->slave_configure
that just set it to the cmd_per_lun default.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2014-11-12 11:19:43 +01:00
Christoph Hellwig 2ecb204d07 scsi: always assign block layer tags if enabled
Allow a driver to ask for block layer tags by setting .use_blk_tags in the
host template, in which case it will always see a valid value in
request->tag, similar to the behavior when using blk-mq.  This means even
SCSI "untagged" commands will now have a tag, which is especially useful
when using a host-wide tag map.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12 11:19:43 +01:00
Christoph Hellwig 5066863337 scsi: remove abuses of scsi_populate_tag
Unless we want to build a SPI tag message we should just check SCMD_TAGGED
instead of reverse engineering a tag type through the use of
scsi_populate_tag_msg.

Also rename the function to spi_populate_tag_msg, make it behave like the
other spi message helpers, and move it to the spi transport class.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12 11:19:41 +01:00
Christoph Hellwig a62182f338 scsi: provide a generic change_queue_type method
Most drivers use exactly the same implementation, so provide it as a
library function.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12 11:19:39 +01:00
Linus Torvalds 9a50aaefc1 SCSI for-linus on 20141007
This patch set consists of the usual driver updates (megaraid_sas, arcmsr,
 be2iscsi, lpfc, mpt2sas, mpt3sas, qla2xxx, ufs) plus several assorted fixes
 and miscellaneous updates (including the pci_msix_enable_range() changes that
 have been pending for a while).
 
 Signed-off-by: James Bottomley <JBottomley@Parallels.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJUNHvtAAoJEDeqqVYsXL0MzaoIAJ/R2JW/Xm50rD6iUj6RfjEc
 6OOi3sOJe6yivPFLLTmIZyLcgHuZKPVXsjcjBXENsrjJeyu2aTq+vs2bOJN9BRYU
 gHGyAEhVPKsvecYhEj/78ClRIMzwkr7KQMQConbClDa0sVr62M/dPQVHNvjaTDeS
 rtmPGZbNpv9rCl0itNBLMrnOBT/MduuWtS2VNCAkV5yFU8kvEax5pizB+W4ztjoe
 BnVnF8OJC70wAM4vpiUcgwCR5AGmYv5SQKn3AHNBayrJic0MLUSIhrnCptc9TSir
 zWJAyoW2iQY1LKmihjwjDlXP40jbfOaBacEycqTUKNkfMRKbBl3qQa4IUrR1XsQ=
 =I1Yg
 -----END PGP SIGNATURE-----

Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This patch set consists of the usual driver updates (megaraid_sas,
  arcmsr, be2iscsi, lpfc, mpt2sas, mpt3sas, qla2xxx, ufs) plus several
  assorted fixes and miscellaneous updates (including the
  pci_msix_enable_range() changes that have been pending for a while)"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (202 commits)
  scsi: add a CONFIG_SCSI_MQ_DEFAULT option
  ufs: definitions for phy interface
  ufs: tune bkops while power managment events
  ufs: Add support for clock scaling using devfreq framework
  ufs: Add freq-table-hz property for UFS device
  ufs: Add support for clock gating
  ufs: refactor configuring power mode
  ufs: add UFS power management support
  ufs: introduce well known logical unit in ufs
  ufs: manually add well known logical units
  ufs: Active Power Mode - configuring bActiveICCLevel
  ufs: improve init sequence
  ufs: refactor query descriptor API support
  ufs: add voting support for host controller power
  ufs: Add clock initialization support
  ufs: Add regulator enable support
  ufs: Allow vendor specific initialization
  scsi: don't add scsi_device if its already visible
  scsi: fix the type for well known LUs
  scsi: fix comment in struct Scsi_Host definition
  ...
2014-10-07 21:29:18 -04:00
Hiral Shah 86001f248e fnic: assign FIP_ALL_FCF_MACS to fcoe_all_fcfs
1) Assgning FIP_ALL_FCF_MACS to fcoe_all_fcfs allows VLAN request to be sent
to correct Mac address for VLAN Discovery otherwise VLAN request will be
sent to invalid address hence FLOGI never happens.

2) Simplify the copy_and_format_trace_data code and log the correct Link event
for fnic control path tracing in case of link status UP->UP.

3) Increment Fnic driver version

Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-16 09:10:02 -07:00
Masanari Iida 1a84db567a treewide: fix errors in printk
This patch fix spelling typo in printk.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-01 11:18:25 +02:00
Alexander Gordeev 1e5df2a533 fnic: Use pci_enable_msix_exact() instead of pci_enable_msix()
As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range()  or pci_enable_msi_exact()
and pci_enable_msix_range() or pci_enable_msix_exact()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Acked-by: "Suma Ramars (sramars)" <sramars@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-29 08:38:23 -04:00
Christoph Hellwig 4d63716898 fnic: reject device resets without assigned tags for the blk-mq case
Current the midlayer fakes up a struct request for the explicit reset
ioctls, and those don't have a tag allocated to them.  The fnic driver pokes
into midlayer structures to paper over this design issue, but that won't
work for the blk-mq case.

Either someone who can actually test the hardware will have to come up with
a similar hack for the blk-mq case, or we'll have to bite the bullet and fix
the way the EH ioctls work for real, but until that happens we fail these
explicit requests here.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Webb Scales <webbnh@hp.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Tested-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Robert Elliott <elliott@hp.com>
Cc: Hiral Patel <hiralpat@cisco.com>
Cc: Suma Ramars <sramars@cisco.com>
Cc: Brian Uchino <buchino@cisco.com>
2014-07-25 17:16:34 -04:00
Hannes Reinecke 9cb78c16f5 scsi: use 64-bit LUNs
The SCSI standard defines 64-bit values for LUNs, and large arrays
employing large or hierarchical LUN numbers become more and more
common.

So update the linux SCSI stack to use 64-bit LUN numbers.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Ewan Milne <emilne@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-17 22:07:37 +02:00
Hiral Shah abb14148c0 fnic: fnic Control Path Trace Utility
Fnic Ctlr Path Trace utility is a tracing functionality built directly into fnic
driver to trace the control path frames like discovery, FLOGI request/reply,
PLOGI request/reply, link event etc.  It will be one trace file for all fnics.
It will help us to debug and resolve the discovery and initialization related
issues in more convenient way. This trace information includes time stamp,
Host Number, Frame type, Frame Length and Frame. By default,64 pages are
allocated but we can change the number of allocated pages by module parameter
fnic_fc_trace_max_page. Each entry is of 256 byte and available entries are
depends on allocated number of pages. We can turn on or off the fnic control
path trace functionality by module paramter fc_trace_enable and/or reset the
trace contain by module paramter fc_trace_clear.

Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19 13:33:00 +02:00
Hiral Shah 668186637e fnic: Failing to queue aborts due to Q full cause terminate driver timeout
In fnic abort handler, abort queuing can be failed when hardware queue is full.
The command state is left as abort queued. The command with abort queued state
will never be queued next time for abort or termiantion.
Fix restores the command state in above case.

Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Narsimhulu Musini <nmusini@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19 13:32:55 +02:00
Hiral Shah c8ff03c6da fnic: NoFIP solicitation frame in NONFIP mode and changed IO Throttle count
This patch contains following three minor fixes.

1) During Probe, fnic was sending FIP solicitation in Non FIP mode which is not
   expected, setting the internal fip state to Non FIP mode explicitly, avoids
   sending FIP frame.

2) When target goes offline, all outstanding IOs belong to the target will be
   terminated by driver, If the termination count is high, then it influences
   firmware responsiveness. To improve the responsiveness, default IO throttle
   count is reduced to 256.

3) Accessing Virtual Fabric Id (vfid) and fc_map of Fibre-Channel Forwarder(FCF)
   is invalid in fnic driver when Clear Virtual Link(CVL) is received prior to
   receiving flogi reject from switch. As CVL clears all FCFs.

Signed-off-by: Hiral Shah <hishah@cisco.com>
Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com>
Signed-off-by: Narsimhulu Musini <nmusini@cisco.com>
Signed-off-by: Anantha Tungarakodi <atungara@cisco.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19 13:32:51 +02:00
Linus Torvalds 9073e1a804 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
 "Usual earth-shaking, news-breaking, rocket science pile from
  trivial.git"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits)
  doc: usb: Fix typo in Documentation/usb/gadget_configs.txt
  doc: add missing files to timers/00-INDEX
  timekeeping: Fix some trivial typos in comments
  mm: Fix some trivial typos in comments
  irq: Fix some trivial typos in comments
  NUMA: fix typos in Kconfig help text
  mm: update 00-INDEX
  doc: Documentation/DMA-attributes.txt fix typo
  DRM: comment: `halve' -> `half'
  Docs: Kconfig: `devlopers' -> `developers'
  doc: typo on word accounting in kprobes.c in mutliple architectures
  treewide: fix "usefull" typo
  treewide: fix "distingush" typo
  mm/Kconfig: Grammar s/an/a/
  kexec: Typo s/the/then/
  Documentation/kvm: Update cpuid documentation for steal time and pv eoi
  treewide: Fix common typo in "identify"
  __page_to_pfn: Fix typo in comment
  Correct some typos for word frequency
  clk: fixed-factor: Fix a trivial typo
  ...
2013-11-15 16:47:22 -08:00
James Bottomley 323f6226a8 Pull Request for 3.13
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSZW0dAAoJEEajxTw9cn4HMp8P/Ap2hwIHFfbdfshktNSLy6Xi
 xXq46qFh5IaiKE2+t3P4pDdr9UvaXD92ijVWSO0eZr2Y3cQ896/v7bakQt493BFB
 sRylmto7pzTGfA+tY5X498kBYKIHlKYdcY6sF89cOmMje8IMtwdlg4vWPbGXxFz5
 z7VvIJkgTMDNOtJre93N0oSAfQf5iH9X7fnLGSsYntVTXoBrjzWHPq1547lhI7uR
 Zt1yTP5kvo3lvpLZuDB2+sly+Q7qsOJIN4teYIM0+gnIKXFqd2GGGw+MaFnx/jcu
 JIJuXkcDNxThLoT311IHPedWKt35liAI2aIy6z5uVeX/aGarcji0l2iDbJ7xswoL
 SMu6gQwdnNIZRFPupjWQCGd41wph1woo0W69a90Q57Sz9Yn8/owHhbApRHp2eCKx
 mz/AJ6wL4+Nq0oniRsxjFf8BJaqzbWxsp3hAcXXpsuliAH00D5Px0go/B80L1y32
 R3NJ8earBo/cLaElmEdKT8fVuyiLdT4ckOVGF+MKuoXr+XfsI/p9o2wc/JZ1gTTH
 UfU5ee0d2BCj6tgh2QVsLXra9aHbXUa39YREUlO4QWG5ze0d+P/LMDCSlO+lxMk7
 lUQRgQ91UQYpBOrSGzPcvSMmqg7vD+d4+PkTdIbaZtQUdQ1HLL0ARk6hFd14Cm2A
 3CBlGvw/pPlk7+WQP92q
 =6dOX
 -----END PGP SIGNATURE-----

Merge tag 'fcoe-3.13' into for-linus

Pull Request for 3.13 for FCOE tree.

Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-11-10 12:19:15 +08:00
Hiral Patel 5ae3034430 [SCSI] fnic: Incremented driver version
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25 09:57:57 +01:00
Hiral Patel 67125b0287 [SCSI] fnic: Fnic Statistics Collection
This feature gathers active and cumulative per fnic stats for io,
abort, terminate, reset, vlan discovery path and it also includes
various important stats for debugging issues. It also provided
debugfs and ioctl interface for user to retrieve these stats.
It also provides functionality to reset cumulative stats through
user interface.

Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25 09:57:57 +01:00
Narsimhulu Musini 441fbd2595 [SCSI] fnic: host reset returns nonzero value(errno) on success
Fixed appropriate error codes that returns negative error number on failure,
and 0 on success. fnic_reset() is used directly by the fc transport callback
issue_fc_host_lip which requires a negative error number on failure.

Signed-off-by: Narsimhulu Musini <nmusini@cisco.com>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25 09:57:56 +01:00
Joe Perches 6942df7f77 scsi: Convert uses of compare_ether_addr to ether_addr_equal
Preliminary to removing compare_ether_addr altogether:

Use the new bool function ether_addr_equal to add
some clarity and reduce the likelihood for misuse
of compare_ether_addr for sorting.

Done via cocci script:

$ cat compare_ether_addr.cocci
@@
expression a,b;
@@
-	!compare_ether_addr(a, b)
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	compare_ether_addr(a, b)
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!ether_addr_equal(a, b) == 0
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!ether_addr_equal(a, b) != 0
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	ether_addr_equal(a, b) == 0
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	ether_addr_equal(a, b) != 0
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!!ether_addr_equal(a, b)
+	ether_addr_equal(a, b)

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
2013-10-14 08:25:40 -07:00
Jingoo Han 08b7e10716 SCSI: remove unnecessary pci_set_drvdata()
Since commit 0998d06310
(device-core: Ensure drvdata = NULL when no driver is bound),
the driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: James Bottomley <JBottomley@parallels.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-10-14 15:26:04 +02:00
Hiral Patel fc85799ee3 [SCSI] fnic: fnic Driver Tuneables Exposed through CLI
Introduced module params to provide dynamic way of configuring
queue depth.

Added support to get max io throttle count through UCSM to
configure maximum outstanding IOs supported by fnic and push
that value to scsi mid-layer.

  Supported IO throttle values:

  UCSM IO THROTTLE VALUE        FNIC MAX OUTSTANDING IOS
  ------------------------------------------------------
        16 (Default)                    2048
        <= 256                          256
        > 256                           <ucsm value>

Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-11 15:59:25 -07:00
Sesidhar Beddel d0385d9265 [SCSI] fnic: Kernel panic while running sh/nosh with max lun cfg
Kernel panics due to NULL lport while executing the log message because
of synchronization issues between libfc and scsi transport fc. Checking
for NULL pointers at the beginning of this routine would resolve the issue
from kernel panic point of view.

Signed-off-by: Sesidhar Baddel <sebaddel@cisco.com>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-11 15:56:44 -07:00
Sesidhar Beddel 1259c5dc75 [SCSI] fnic: Hitting BUG_ON(io_req->abts_done) in fnic_rport_exch_reset
Hitting BUG_ON(io_req->abts_done) in fnic_rport_exch_reset in case of
timing issue and also to some extent locking issue where abts and terminate
is happening around same timing.

The code changes are intended to update CMD_STATE(sc) and
io_req->abts_done together.

Signed-off-by: Sesidhar Beddel <sebaddel@cisco.com>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-11 15:54:08 -07:00
Suma Ramars 318c7c4325 [SCSI] fnic: Remove QUEUE_FULL handling code
Remove fnic driver QUEUE_FULL handling code instead let SCSI mid layer
handle queue full and use its algorithm to ramp down/up queue

Signed-off-by: Suma Ramars <sramars@cisco.com>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-11 15:49:30 -07:00
Brian Uchino 87aa619c17 [SCSI] fnic: On system with >1.1TB RAM, VIC fails multipath after boot up
Issue was seen when SCSI buffer address is more than 40 bits in system
with more than 1.1TB RAM. When SCSI buffer is passed to VIC, it is failing
to map to correct buffer address, as DMA mask is set to 40 bits in driver
initialization. Corrected DMA_MASK from 40-bits to 64-bits to avoid masking
41-64 bits addresses.

Signed-off-by: Brian Uchino <buchino@cisco.com>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-11 14:49:40 -07:00
Narsimhulu Musini 1adee04011 [SCSI] fnic: FC stat param seconds_since_last_reset not getting updated
Code to reset fc_host statistics.
echo 1 > /sys/class/fc_host/hostX/statistics/reset_statistics clears fc_host stats,
the code also issues command to fnic firmware to clear vnic stats.

Signed-off-by: Narsimhulu Musini <nmusini@cisco.com>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-11 12:47:44 -07:00
Chris Leech e09056b25c [SCSI] fnic: BUG: sleeping function called from invalid context during probe
I hit this during driver probe with the latest fnic updates (this trace
is from a backport into a distro kernel, but the issue is the same).

> BUG: sleeping function called from invalid context at mm/slab.c:3113
> in_atomic(): 0, irqs_disabled(): 1, pid: 610, name: work_for_cpu
> INFO: lockdep is turned off.
> irq event stamp: 0
> hardirqs last  enabled at (0): [<(null)>] (null)
> hardirqs last disabled at (0): [<ffffffff81070aa5>]
> copy_process+0x5e5/0x1670
> softirqs last  enabled at (0): [<ffffffff81070aa5>]
> copy_process+0x5e5/0x1670
> softirqs last disabled at (0): [<(null)>] (null)
> Pid: 610, comm: work_for_cpu Not tainted
> Call Trace:
>  [<ffffffff810b2d10>] ? print_irqtrace_events+0xd0/0xe0
>  [<ffffffff8105c1a7>] ? __might_sleep+0xf7/0x130
>  [<ffffffff81184efb>] ? kmem_cache_alloc_trace+0x20b/0x2d0
>  [<ffffffff8109709e>] ? __create_workqueue_key+0x3e/0x1d0
>  [<ffffffff8109709e>] ? __create_workqueue_key+0x3e/0x1d0
>  [<ffffffffa00c101c>] ? fnic_probe+0x977/0x11aa [fnic]
>  [<ffffffffa00c1048>] ? fnic_probe+0x9a3/0x11aa [fnic]
>  [<ffffffff81096f00>] ? do_work_for_cpu+0x0/0x30
>  [<ffffffff812c6da7>] ? local_pci_probe+0x17/0x20
>  [<ffffffff81096f18>] ? do_work_for_cpu+0x18/0x30
>  [<ffffffff8109cdc6>] ? kthread+0x96/0xa0
>  [<ffffffff8100c1ca>] ? child_rip+0xa/0x20
>  [<ffffffff81550f80>] ? _spin_unlock_irq+0x30/0x40
>  [<ffffffff8100bb10>] ? restore_args+0x0/0x30
>  [<ffffffff8109cd30>] ? kthread+0x0/0xa0
>  [<ffffffff8100c1c0>] ? child_rip+0x0/0x20

The problem is in this hunk of "FIP VLAN Discovery Feature Support"
(d3c995f1dc)

create_singlethreaded_workqueue cannot be called with irqs disabled

@@ -620,7 +634,29 @@ static int __devinit fnic_probe(struct pci_dev
*pdev,
        vnic_dev_packet_filter(fnic->vdev, 1, 1, 0, 0, 0);
        vnic_dev_add_addr(fnic->vdev, FIP_ALL_ENODE_MACS);
        vnic_dev_add_addr(fnic->vdev, fnic->ctlr.ctl_src_addr);
+       fnic->set_vlan = fnic_set_vlan;
        fcoe_ctlr_init(&fnic->ctlr, FIP_MODE_AUTO);
+       setup_timer(&fnic->fip_timer, fnic_fip_notify_timer,
+                           (unsigned long)fnic);
+       spin_lock_init(&fnic->vlans_lock);
+       INIT_WORK(&fnic->fip_frame_work, fnic_handle_fip_frame);
+       INIT_WORK(&fnic->event_work, fnic_handle_event);
+       skb_queue_head_init(&fnic->fip_frame_queue);
+       spin_lock_irqsave(&fnic_list_lock, flags);
+       if (!fnic_fip_queue) {
+           fnic_fip_queue =
+               create_singlethread_workqueue("fnic_fip_q");
+           if (!fnic_fip_queue) {
+               spin_unlock_irqrestore(&fnic_list_lock, flags);
+               printk(KERN_ERR PFX "fnic FIP work queue "
+                        "create failed\n");
+               err = -ENOMEM;
+               goto err_out_free_max_pool;
+           }
+       }
+       spin_unlock_irqrestore(&fnic_list_lock, flags);
+       INIT_LIST_HEAD(&fnic->evlist);
+       INIT_LIST_HEAD(&fnic->vlans);
    } else {
        shost_printk(KERN_INFO, fnic->lport->host,
                 "firmware uses non-FIP mode\n");

The attempts to make fnic_fip_queue a single instance for the driver
while it's being created in probe look awkward anyway, why is this not
created in fnic_init_module like the event workqueue?

Signed-off-by: Chris Leech <cleech@redhat.com>
Tested-by: Anantha Tungarakodi <atungara@cisco.com>
Acked-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-02 13:16:38 -07:00
Linus Torvalds 84cbd7222b SCSI misc on 20130702
The patch set is mostly driver updates (usf, zfcp, lpfc, mpt2sas,
 megaraid_sas, bfa, ipr) and a few bug fixes.  Also of note is that the
 Buslogic driver has been rewritten to a better coding style and 64 bit support
 added.  We also removed the libsas limitation on 16 bytes for the command size
 (currently no drivers make use of this).
 
 Signed-off-by: James Bottomley <JBottomley@Parallels.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQEcBAABAgAGBQJR0ugCAAoJEDeqqVYsXL0MX2sH+gOkWuy5p3igz+VEim8TNaOA
 VV5EIxG1v7Q0ZiXCp/wcF6eqhgQkWvkrKSxWkaN0yzq8LEWfQeY7VmFDbGgFeVUZ
 XMlX5ay8+FLCIK9M76oxwhV7VAXYbeUUZafh+xX6StWCdKrl0eJbicOGoUk/pjsi
 ZjCBpK5BM0SW+s2gMSDQhO2eMsgMp9QrJMiCJHUF1wWPN8Yez6va1tg4b9iW39BZ
 dd3sJq+PuN6yDbYAJIjEpiGF9gDaaYxSE6bTKJuY+oy08+VsP/RRWjorTENs9Aev
 rQXZIC3nwsv26QRSX7RDSj+UE+kFV6FcPMWMU3HN2UG6ttprtOxT8tslVJf7LcA=
 =BxtF
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull first round of SCSI updates from James Bottomley:
 "The patch set is mostly driver updates (usf, zfcp, lpfc, mpt2sas,
  megaraid_sas, bfa, ipr) and a few bug fixes.  Also of note is that the
  Buslogic driver has been rewritten to a better coding style and 64 bit
  support added.  We also removed the libsas limitation on 16 bytes for
  the command size (currently no drivers make use of this)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (101 commits)
  [SCSI] megaraid: minor cut and paste error fixed.
  [SCSI] ufshcd-pltfrm: remove unnecessary dma_set_coherent_mask() call
  [SCSI] ufs: fix register address in UIC error interrupt handling
  [SCSI] ufshcd-pltfrm: add missing empty slot in ufs_of_match[]
  [SCSI] ufs: use devres functions for ufshcd
  [SCSI] ufs: Fix the response UPIU length setting
  [SCSI] ufs: rework link start-up process
  [SCSI] ufs: remove version check before IS reg clear
  [SCSI] ufs: amend interrupt configuration
  [SCSI] ufs: wrap the i/o access operations
  [SCSI] storvsc: Update the storage protocol to win8 level
  [SCSI] storvsc: Increase the value of scsi timeout for storvsc devices
  [SCSI] MAINTAINERS: Add myself as the maintainer for BusLogic SCSI driver
  [SCSI] BusLogic: Port driver to 64-bit.
  [SCSI] BusLogic: Fix style issues
  [SCSI] libiscsi: Added new boot entries in the session sysfs
  [SCSI] aacraid: Fix for arrays are going offline in the system. System hangs
  [SCSI] ipr: IOA Status Code(IOASC) update
  [SCSI] sd: Update WRITE SAME heuristics
  [SCSI] fnic: potential dead lock in fnic_is_abts_pending()
  ...
2013-07-04 12:30:30 -07:00
Al Viro eb5881d37f fnic: switch to fixed_size_llseek()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29 12:57:31 +04:00
Dan Carpenter 5d65f91896 [SCSI] fnic: potential dead lock in fnic_is_abts_pending()
There is an unlock missing if the == FNIC_IOREQ_ABTS_PENDING is
false.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-26 17:41:44 -07:00
Al Viro 8177a9d79c lseek(fd, n, SEEK_END) does *not* go to eof - n
When you copy some code, you are supposed to read it.  If nothing else,
there's a chance to spot and fix an obvious bug instead of sharing it...

X-Song: "I Got It From Agnes", by Tom Lehrer
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[ Tom Lehrer? You're dating yourself, Al ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-16 08:10:53 -10:00
Hiral Patel 62271dbda7 [SCSI] fnic: Incremented driver version
Signed-off-by: Brian Uchino <buchino@cisco.com>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02 07:32:24 -07:00
Hiral Patel d7fadce335 [SCSI] fnic: Kernel panic due to FIP mode misconfiguration
If switch configured in FIP and adapter configured in non-fip mode, driver
panics while queueing FIP frame in non-existing fip_frame_queue. Added config
check before queueing FIP frame in misconfiguration case to avoid kernel panic.

Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02 07:32:23 -07:00
Hiral Patel d3c995f1dc [SCSI] fnic: FIP VLAN Discovery Feature Support
FIP VLAN discovery discovers the FCoE VLAN that will be used by all other FIP
protocols as well as by the FCoE encapsulation for Fibre Channel payloads on
the established virtual link. One of the goals of FC-BB-5 was to be as
nonintrusive as possible on initiators and targets, and therefore FIP VLAN
discovery occurs in the native VLAN used by the initiator or target to
exchange Ethernet traffic. The FIP VLAN discovery protocol is the only FIP
protocol running on the native VLAN; all other FIP protocols run on the
discovered FCoE VLANs.

If an administrator has manually configured FCoE VLANs on ENodes and FCFs,
there is no need to use this protocol. FIP and FCoE will run over the
configured VLANs.

An ENode without FCoE VLANs configuration would use this automated discovery
protocol to discover over which VLANs FCoE is running.

The ENode sends a FIP VLAN discovery request to a multicast MAC address called
All-FCF-MACs, which is a multicast MAC address to which all FCFs listen.

All FCFs that can be reached in the native VLAN of the ENode are expected to
respond on the same VLAN with a response that lists one or more FCoE VLANs
that are available for the ENode's VN_Port login. This protocol has the sole
purpose of allowing the ENode to discover all the available FCoE VLANs.

Now the ENode may enable a subset of these VLANs for FCoE Running the FIP
protocol in these VLANs on a per VLAN basis. And FCoE data transactions also
would occur on this VLAN. Hence, Except for FIP VLAN discovery, all other FIP
and FCoE traffic runs on the selected FCoE VLAN.  Its only the FIP VLAN
Discovery protocol that is permitted to run on the Default native VLAN of the
system.

[**** NOTE ****]
We are working on moving this feature definitions and functionality to libfcoe
module. We need this patch to be approved, as Suse is looking forward to merge
this feature in SLES 11 SP3 release.  Once this patch is approved, we will
submit patch which should move vlan discovery feature to libfoce.

[Fengguang Wu <fengguang.wu@intel.com>: kmalloc cast removal]
Signed-off-by: Anantha Prakash T <atungara@cisco.com>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02 07:30:40 -07:00
Hiral Patel 4d7007b49d [SCSI] fnic: Fnic Trace Utility
Fnic Trace utility is a tracing functionality built directly into fnic driver
to trace events. The benefit that trace buffer brings to fnic driver is the
ability to see what it happening inside the fnic driver. It also provides the
capability to trace every IO event inside fnic driver to debug panics, hangs
and potentially IO corruption issues. This feature makes it easy to find
problems in fnic driver and it also helps in tracking down strange bugs in a
more manageable way. Trace buffer is shared across all fnic instances for
this implementation.

Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22 17:32:07 +00:00