Some cards have a so-called low-latency mode, in which they present
a single multichannel stream with no mixing or samplerate conversion.
In this mode the card can generate an interrupt per internal processing
block (typically 32 or 64 frames)
Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Audio cards wth have AVB or BLU Link IO.
Tuner card with DAB receiver
Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
New HP machine supported output mute led and input mute led.
ALC286:
GPIO1 to control output mute led.
GPIO5 to control input mute led.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are a few duplicated codes handling the mute and mic-mute LEDs
via GPIO pins. Let's consolidate to single helpers. Here we
introduced two new fields to alc_spec, gpio_mute_led_mask and
gpio_mic_led_mask, to contain the bit mask to set/clear. Also,
mute_led_polarity is evaluated as well.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The release_firmware() function tests whether its argument is NULL and then
return immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The vfree() function performs also input parameter validation. Thus the test
around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snd_ac97_resume() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The functions kfree() and release_firmware() test whether their argument
is NULL and then return immediately. Thus the test around the call
is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
earlier we were ignoring the return value of snd_ak4114_create and
always returning 0.
now we are returning the actual status. revo_init is calling this
function, and revo_init is checking the return value.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
buf_size was initialized with snd_pcm_lib_buffer_bytes,
but never used. and so it is safe to be deleted.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
the functions:
snd_ice1712_akm4xxx_build_controls
snd_ice1712_build_pro_mixer
snd_ctl_add
snd_ak4114_build
prodigy192_ak4114_init
snd_ak4113_build
are all returning either 0 or a negetive error value.
so we can easily remove the check for a negative value and return
the value instead.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a new helper function snd_pcm_stop_xrun() to the standard sequnce
lock/snd_pcm_stop(XRUN)/unlock by a single call, and replace the
existing open codes with this helper.
The function checks the PCM running state to prevent setting the wrong
state, too, for more safety.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This merges the USB-audio disconnect fix and resolves the conflicts
so that we can continue working on development of usb-audio stuff.
Conflicts:
sound/usb/card.c
commit "b5b4a41b392960010fccf1f9ccf8334d612bd450" was dereferencing
chip after it has been freed. This patch fixes that and at the same
time removes some debugging messages, which are unnecessary, as they
are just printing information about entry and exit from a function,
and which switch-case it is executing.
we can easily get from ftrace the information about the entry and exit
from a function.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Without the fix, the mute led can't work on these three machines.
After apply this fix, these three machines will fall back on the led
control quirk as below, and through testing, the mute led works very
well.
PIN_QUIRK(0x10ec0282, 0x103c, "HP", ALC269_FIXUP_HP_LINE1_MIC1_LED,
ALC282_STANDARD_PINS,
{0x12, 0x90a60140},
...
BugLink: https://bugs.launchpad.net/bugs/1389497
Tested-by: TieFu Chen <tienfu.chen@canonical.com>
Cc: Kailang Yang <kailang@realtek.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The functions kfree(), release_firmware() and snd_util_memhdr_free() test
whether their argument is NULL and then return immediately. Thus the test
around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
removed all references of snd_printk with the standard dev_* macro.
[a few places degraded to dev_dbg(), too -- tiwai]
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
added reference of struct echoaudio to free_firmware function.
this structure will be later used to get a reference of the card
when converting snd_printk to dev_* in the next patch of the series.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The default EAPD control uses verb command to control EAPD. Some codec
does not have verb command for EAPD. It needs to control by hidden
register.
This update will avoid wrong behavior for some codec. This patch will
fix double setup for EAPD. It just needs to turn on by one site for
verb command or hidden register controlled.
Detailed changes:
- alc889_coef_init() is replaced with alc_update_coef_idx() with a
correct COEF value.
- for ALC262, ALC887 and ALC900, the EAPD setup via the hidden
register is removed because this rather conflicts with the EAPD verb
setup.
- For ALC888-VC, also the hidden register access is removed in
alc888_coef_init().
- Remove the dead #if 0 code for ALC267/ALC268.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These three HP machines all have the same pin config, so we can
change it to a pin quirk.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These HP machines needs GPIO 4 low to enable the headphone amplifier.
In addition, we still need to control LEDs via vref and GPIO.
Cc: stable@vger.kernel.org
BugLink: https://bugs.launchpad.net/bugs/1387128
Tested-by: TienFu Chen <tienfu.chen@canonical.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
es1968_measure_clock uses struct timeval, which on 32-bit systems will overflow
in 2038, leading to incorrect interpretation of time.This patch changes the
function to use ktime_t instead of struct timeval, which implies:
- no y2038: ktime_t uses a 64-bit datatype explicitly.
- efficent subtraction: The earlier version computes the difference in usecs
while dealing with secs and nsecs. It requires checks to see if the nsecs of
stop is less than start. This patch uses a direct subtract of ktime_t and
converts to usecs.
- use of monotonic clock (ktime_get) over real time (do_gettimeofday),
which simplifies timekeeping, as it does not have to deal with cases
where stop_time is less than start_time.
Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
CMI8888 shows the stuttering playback when the snooping is disabled
on the audio buffer. Meanwhile, we've got reports that CORB/RIRB
doesn't work in the snooped mode. So, as a compromise, disable the
snoop only for CORB/RIRB and enable the snoop for the stream buffers.
The resultant patch became a bit ugly, unfortunately, but we still can
live with it.
Reported-and-tested-by: Geoffrey McRae <geoff@spacevs.com>
Cc: <stable@vger.kernel.org> # 3.17+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
removed the unused variables. These variables were only being
assigned some value, but the values were never being used.
it has been build tested after removing the variables.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Put more kerneldoc comments to the exported functions.
Still the generic parser code and the HD-audio controller code aren't
covered yet, though.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch is concerned with migrating the time variables in the pcxhr
module found in the sound driver. The changes are concerend with the
y2038 problem where timeval will overflow in the year 2038. ktime_t
was used instead of timeval to get the wall time. The difference
is displayed now in nanoseconds instead of microseconds.
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
request_module() handles the printf style arguments, so we don't have
to render strings in the caller side. Not only it reduces the
unnecessary temporary string buffer, it's even safer from the security
POV.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It is lite version of AIO machine(0x0626).
The audio layout of this machine was similar with SSID 0x0626.
The audio was same as commit ad8ff99e6b.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Precedence of & and >> is not the same and is not left to right.
shift has higher precedence and should be done after the mask.
Add parentheses around the mask.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Update two records for ALC283 for restore default value.
[The update doesn't seem to have high impact on the existing machines,
but it fixes possible issues, especially expected in BIOS changes on
new machines, according to Realtek -- tiwai]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Update default value for ALC282 for COEF.
[The update doesn't seem to have high impact on the existing machines,
but it fixes possible issues, especially expected in BIOS changes on
new machines, according to Realtek -- tiwai]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Without this terminating entry, the pin matching would continue
across random memory until a zero or a non-matching entry was found.
The result being that in some cases, the pin quirk would not be
applied correctly.
Cc: stable@vger.kernel.org
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Eliot Blennerhassett
Kailang Yang
Takashi Iwai
Markus Elfring
Sudip Mukherjee
Sudip Mukherjee
Hui Wang
David Henningsson
Tina Ruchandani
Lukas Bossard
Aya Mahfouz
Joe Perches