Commit Graph

1411 Commits

Author SHA1 Message Date
Michał Mirosław 896b65f345 regulator: show state for GPIO-controlled regulators
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-04 18:38:06 +00:00
Amit Daniel Kachhap 26aec009f6 regulator: add device tree support for s5m8767
This device tree support is added for PMIC block of S5m8767 multi
function driver. The usage detail is added in the device tree
documentation section. This change is tested on exynos5250 based
arndale platform by regulator voltage set/get API's.

Reviewed-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
Tested-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-04 10:31:31 +00:00
Axel Lin f33d0081ff regulator: palmas: Remove a redundant setting for warm_reset
Current code read "ti,warm_reset" of property twice, and set
pdata->reg_init[idx]->warm_reset twice. Read and set it once is enough.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-04 10:24:35 +00:00
Alim Akhtar c76edd52bf regulator: s2mps11: fix incorrect register for buck10
For BUCK10 the control registers are wrongly set as buck9 control register
This patch corrects the control registers for buck10

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
2013-01-31 14:45:11 +08:00
Axel Lin 86f6673325 regulator: mc13xxx: Use of_get_child_count()
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-31 14:43:32 +08:00
Axel Lin ee70b25849 regulator: max8997: Use of_get_child_count()
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-31 14:43:29 +08:00
Axel Lin 09a228e70b regulator: tps65090: Fix using wrong dev argument for calling of_regulator_match
The dev parameter is the device requesting the data.
In this case it should be &pdev->dev rather than pdev->dev.parent.

The dev parameter is used to call devm_kzalloc in of_get_regulator_init_data(),
which means this fixes a memory leak because the memory is allocated every time
probe() is called, thus it should be freed when this driver is unloaded.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-31 14:42:05 +08:00
Anson Huang 9ee417c074 regulators: anatop: add set_voltage_time_sel interface
some of anatop's regulators(cpu, vddpu and vddsoc) have
register settings about LDO's step time, which will impact
the LDO ramp up speed, need to use set_voltage_time_sel
interface to add necessary delay everytime LDOs' voltage
is increased.

offset 0x170:
bit [24-25]: cpu
bit [26-27]: vddpu
bit [28-29]: vddsoc

field definition:
0'b00: 64 cycles of 24M clock;
0'b01: 128 cycles of 24M clock;
0'b02: 256 cycles of 24M clock;
0'b03: 512 cycles of 24M clock;

Signed-off-by: Anson Huang <b20788@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-31 14:40:49 +08:00
Axel Lin c92f5dd2c4 regulator: Add missing of_node_put()
of_find_node_by_name() returns a node pointer with refcount incremented, use
of_node_put() on it when done.

of_find_node_by_name() will call of_node_put() against from parameter,
thus we also need to call of_node_get(from) before calling
of_find_node_by_name().

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-30 18:50:27 +08:00
Mark Brown 9c9588a732 Merge remote-tracking branches 'regulator/fix/max8907', 'regulator/fix/max8997', 'regulator/fix/tps65910' and 'regulator/topic/mc13892' into regulator-of 2013-01-30 18:50:14 +08:00
Axel Lin 0ce7d00d0d regulator: tps6507x: Fix using wrong dev argument for calling of_regulator_match
The dev parameter is the device requesting the data.
In this case it should be &pdev->dev rather than pdev->dev.parent.

The dev parameter is used to call devm_kzalloc in of_get_regulator_init_data(),
which means this fixes a memory leak because the memory is allocated every time
probe() is called, thus it should be freed when this driver is unloaded.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-30 18:44:41 +08:00
Stephen Warren a2f95c3637 regulator: clear state each invocation of of_regulator_match
of_regulator_match() saves some dynamcially allocated state into the
match table that's passed to it. By implementation and not contract, for
each match table entry, if non-NULL state is already present,
of_regulator_match() will not overwrite it. of_regulator_match() is
typically called each time a regulator is probe()d. This means it is
called with the same match table over and over again if a regulator
triggers deferred probe. This results in stale, kfree()d data being left
in the match table from probe to probe, which causes a variety of crashes
or use of invalid data.

Explicitly free all output state from of_regulator_match() before
generating new results in order to avoid this.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
2013-01-30 10:11:06 +08:00
Laxman Dewangan 6c7a7a0e36 regulator: tps65090: add DT support
Add DT support for TI PMIC tps65090 regulator driver. The DT of this
device have node regulator and all regulator's node of this device is
added under this node.

The device tree binding document has the required information for
adding this device on DTS file.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-29 19:09:34 +08:00
Mark Brown 1433d0905f Merge remote-tracking branch 'regulator/fix/tps80031' into tmp 2013-01-29 11:14:35 +08:00
Axel Lin a451405fcd regulator: gpio-regulator: Staticize of_get_gpio_regulator_config()
of_get_gpio_regulator_config() is only used in gpio-regulator.c, make it static.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-29 00:44:17 +08:00
Axel Lin 655efa0ff2 regulator: gpio-regulator: Use of_gpio_count()
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-29 00:44:17 +08:00
Matt Sealey 2c8a5dcaa4 regulator: mc13892: sanity check num_regulators parsed vs. registered
Imagine a situation where a device tree has a few regulators in an
appropriate node:

regulators {
	sw1 {
		..
	};

	vvideo {
		..
	};

	:

	vfake {
		..
	};

	vtypo {
		..
	};
};

In the above example, the node name "vfake" is an attempt to match a
regulator name inside the driver which just so happens to not exist. The
node name "vtypo" represents an accidental typographical error in a
regulator name which may have been introduced to a device tree.

In these cases, the number of regulators the mc13892 driver thinks it has
does not match the number of regulators it parsed and registered. Since
it will go over this array based on this number, it will actually
re-register regulator "0" (which happens to be SW1) over and over
again until it reaches the number, resulting in messages on the kernel
log such as these:

SW1: at 1100 mV
VVIDEO: at 2775mV
:
SW1: at 1100 mV
SW1: at 1100 mV

.. up to that number of "mismatched" regulators. Nobody using DT can/will
consume these regulators, so it should not be possible for it to cause any
real regulator problems or driver breakages, but it is an easy thing to
miss in a kernel log and is an immediate indication of a problem with the
device tree authoring.

This patch effectively sanity checks the number of counted children of
the regulators node vs. the number that actually matched driver names,
and sets the appropriate num_regulators value. It also gives a little
warning for device tree authors that they MAY have screwed something up,
such that this patch does not hide the device tree authoring problem.

Signed-off-by: Matt Sealey <matt@genesi-usa.com>
Tested-by: Steev Klimaszewski <steev@genesi-usa.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-27 11:22:30 +08:00
Matt Sealey ccf3ed782a regulator: mc13892-regulator: correct/refine handling of the SWxHI bit
MC13892 PMIC supports a "HI" bit for 3 of it's 4 buck switcher outputs,
which enables a higher set of voltage ranges.

Despite a comment in the code ('sw regulators need special care due to the
"hi" bit'), it actually does not take special care since it does not modify
it's use of the selector table index when this bit is set, giving us very
odd behavior when setting a high voltage on supported switchers or listing
current voltages. Net effect is in best case the kernel and sysfs report
lower voltages than are actually set in hardware (1300mV instead of 1800mV
for example) and in the worst case setting a voltage (e.g. 1800mV) will cause
an undervoltage condition (e.g. 1300mV).

Correct the behavior, taking into account SW1 doesn't support the HI bit,
and as such we need to ignore it.

While we are modifying these functions, fix and optimize the following;

* set_voltage_sel callback was using .reg instead of .vsel_reg - since
  they were set to the same value it actually didn't break anything but
  it would be semantically incorrect to use .reg in this case. We now use
  .vsel_reg and be consistent.
* vsel_shift is always 0 for every SWx regulator, and constantly shifting
  and masking off the bottom few bits is time consuming and makes the
  code very hard to read - optimize this out.
* get_voltage_sel uses the variable "val" and set_voltage_sel uses the
  variable "selector" (and reg_value). Introduce the variable "selector"
  to get_voltage_sel such that it makes more sense and allow some leaner
  code in light of the modifications in this patch. Add better exposure
  to the debug print so the register value AND the selector are printed as
  this will adequately show the HI bit in the register.
* correct a comment in probe which is doing a version check. Magic
  values are awful but for once instance, a comment does just as
  good a job as something symbolic.

Signed-off-by: Matt Sealey <matt@genesi-usa.com>
Tested-by: Steev Klimaszewski <steev@genesi-usa.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-27 11:22:21 +08:00
Vishwanathrao Badarkhe, Manish 6116ad94e1 regulator: tps6507x: add device tree support.
Add device tree based initialization support for
TI's tps6507x regulators.
Add device tree binding document for TI's tps6507x
using datasheet:
http://www.ti.com/lit/ds/symlink/tps65070.pdf

Signed-off-by: Vishwanathrao Badarkhe, Manish <manishv.b@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-27 11:19:01 +08:00
Axel Lin 1200c60bc5 regulator: lp8755: Use LP8755_BUCK_MAX instead of magic number
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-27 11:00:25 +08:00
Axel Lin b4895e2ca5 regulator: max8997: Fix using wrong dev argument at various places
Use &pdev->dev rather than iodev->dev for dev_err(), dev_warn() and dev_info().
Use &pdev->dev rather than iodev->dev for devm_kzalloc() and
of_get_regulator_init_data(), this fixes memory leak.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-27 10:56:13 +08:00
Axel Lin b19f575898 regulator: max77686: Fix using wrong dev argument at various places
Use &pdev->dev rather than iodev->dev for dev_err().
Use &pdev->dev rather than iodev->dev for devm_kzalloc() and
of_regulator_match(), this fixes memory leak.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-27 10:54:18 +08:00
Axel Lin f40cbcb933 regulator: max8907: Fix using wrong dev argument for calling of_regulator_match
The dev parameter is the device requesting the data.
In this case it should be &pdev->dev rather than pdev->dev.parent.

The dev parameter is used to call devm_kzalloc in of_get_regulator_init_data(),
which means this fixes a memory leak because the memory is allocated every time
probe() is called, thus it should be freed when this driver is unloaded.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-27 10:53:03 +08:00
Marek Szyprowski 36a6f8c035 regulator: max8998: fix incorrect min_uV value for ldo10
Correct value for minimal voltage for ldo10 output is 950000 uV. This
patch fixes the typo introduced by patch adf6178ad5
("regulator: max8998: Use uV in voltage_map_desc"), what solves broken
probe of max8998 in v3.8-rc4.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-26 16:57:39 +08:00
Axel Lin d4cbca9ef8 regulator: tps80031: Use IS_ERR to check return value of regulator_register()
regulator_register() does not return NULL, it returns ERR_PTR on error.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-26 15:40:36 +08:00
Steven Rostedt 7f46d0f81f regulators: db8500: Fix compile failure for drivers/regulator/dbx500-prcmu.c
Building for the snowball board, I ran into this compile failure:

  CC      drivers/regulator/dbx500-prcmu.o
arm-test.git/drivers/regulator/dbx500-prcmu.c:119:11: error: 'THIS_MODULE' undeclared here (not in a function)
make[3]: *** [drivers/regulator/dbx500-prcmu.o] Error 1
make[2]: *** [drivers/regulator] Error 2

Commit 38e968380 "regulators/db8500: split off shared dbx500 code"
separated out the dbx500 code but did not copy over the required include
to linux/module.h.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-26 15:30:06 +08:00
Axel Lin 08337fdac2 regulator: tps65910: Fix using wrong dev argument for calling of_regulator_match
The dev parameter is the device requesting the data.
In this case it should be &pdev->dev rather than pdev->dev.parent.

The dev parameter is used to call devm_kzalloc in of_get_regulator_init_data(),
which means this fixes a memory leak because the memory is allocated every time
probe() is called, thus it should be freed when this driver is unloaded.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Laxman Dewangan<ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-24 18:59:53 +08:00
Axel Lin 5bce833c44 regulator: tps65217: Fix using wrong dev argument for calling of_regulator_match
The dev parameter is the device requestiong the data.
In this case it should be &pdev->dev rather than pdev->dev.parent.

The dev parameter is used to call devm_kzalloc in of_get_regulator_init_data(),
which means this fixes a memory leak because the memory is allocated every time
probe() is called, thus it should be freed when this driver is unloaded.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-24 18:58:33 +08:00
Axel Lin 31a932e107 regulator: s5m8767: Convert to regulator_[get|set]_voltage_sel_regmap
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-18 15:26:19 +09:00
Axel Lin 510799eaba regulator: lp8755: Remove enum bucks
We already have enum lp8755_bucks in lp8755.h, so it looks pointless adding
enum bucks in lp8755.c.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Tested-by: Daniel Jeong <gshark.jeong@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-17 16:13:59 +09:00
Axel Lin 240a529108 regulator: lp8755: Don't show unrelated messags in lp8755_probe error paths
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-17 16:13:19 +09:00
Axel Lin 854f73ecb5 regulator: s5m8767: Remove max_vol parameter from s5m8767_convert_voltage_to_sel
It looks pointless to pass max_vol to s5m8767_convert_voltage_to_sel().
Compare selected voltage to desc->max is enough to ensure selected voltage
is in supported range.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-17 16:12:22 +09:00
Axel Lin e69995d3bf regulator: lp8788-buck: Remove buck[1|2]_vout_addr array
The vout address for buck[1|2] can be easily calculated,
thus remote these arrays.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Milo Kim <milo.kim@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-17 16:08:08 +09:00
Mark Brown e3d5b2f570 Merge remote-tracking branch 'regulator/fix/s5m8767' into tmp 2013-01-15 09:38:59 +09:00
Mark Brown 3ab91da2f1 Merge remote-tracking branch 'regulator/fix/max8998' into tmp 2013-01-15 09:38:56 +09:00
Mark Brown c63184673e Merge remote-tracking branch 'regulator/fix/max8997' into tmp 2013-01-15 09:38:51 +09:00
Mark Brown a1ed63f4db Merge remote-tracking branch 'regulator/fix/core' into tmp 2013-01-15 09:38:27 +09:00
Mark Brown 9fc50a2ead regulator: arizona-micsupp: Enable bypass in default constraints
This will be used as part of low power accessory detect.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-13 21:31:02 +09:00
Mark Brown e6ed90581b regulator: arizona-micsupp: Enable SYSCLK for charge pump
If we are in non-bypass mode then the SYSCLK is required for full charge
pump operation, otherwise we will fall back to bypass mode. Use the DAPM
context exposed by the ASoC driver to manage this.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-13 21:31:02 +09:00
Axel Lin eb758de6a0 regulator: lp8788-buck: Silence build warning
This driver use id as array index, thus add bounder checking for id.

This patch fixes below build warning:
drivers/regulator/lp8788-buck.c: In function 'lp8788_buck_probe':
drivers/regulator/lp8788-buck.c:490:8: warning: array subscript is above array bounds [-Warray-bounds]
drivers/regulator/lp8788-buck.c:489:63: warning: array subscript is above array bounds [-Warray-bounds]

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-10 12:56:57 +00:00
Axel Lin 81d0a6ae7b regulator: max8998: Ensure enough delay time for max8998_set_voltage_buck_time_sel
Use DIV_ROUND_UP to prevent truncation by integer division issue.
This ensures we return enough delay time.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
2013-01-10 12:55:49 +00:00
Axel Lin adf6178ad5 regulator: max8998: Use uV in voltage_map_desc
Integer division may truncate.
This happens when pdata->buckx_voltagex setting is not align with 1000 uV.
Thus use uV in voltage_map_desc, this ensures the selected voltage won't less
than pdata buckx_voltagex settings.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
2013-01-08 11:16:11 +00:00
Axel Lin bc3b7756b5 regulator: max8997: Use uV in voltage_map_desc
Current code does integer division (min_vol = min_uV / 1000) before pass
min_vol to max8997_get_voltage_proper_val().
So it is possible min_vol is truncated to a smaller value.

For example, if the request min_uV is 800900 for ldo.
min_vol = 800900 / 1000 = 800 (mV)
Then max8997_get_voltage_proper_val returns 800 mV for this case which is lower
than the requested voltage.

Use uV rather than mV in voltage_map_desc to prevent truncation by integer
division.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
2013-01-08 11:14:35 +00:00
Axel Lin c8c14a393b regulator: lp3972: Convert to get_voltage_sel
regulator_list_voltage_table() returns -EINVAL if selector >= n_voltages.
Thus we don't need to check if reg is greater than LP3972_BUCK_VOL_MAX_IDX in
lp3972_[ldo|dcdc]_get_voltage_sel.

LP3972_BUCK_VOL_MIN_IDX and LP3972_BUCK_VOL_MAX_IDX are not used, remove them.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-08 11:07:05 +00:00
Axel Lin cad877ef0a regulator: lp8755: Fix mask for pchip->mphase
According to the datasheet, it has 9 multi-phase mode from 0 to 8 and it takes
4 bits in the register.
The mask for pchip->mphase should be 0x0F.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-08 11:05:26 +00:00
Axel Lin a1a41ab4e9 regulator: lp8755: Fix lp8755_regulator_init unwind code
It's safe to pass NULL argument to regulator_unregister(), so we can remove
the NULL checking before calling regulator_unregister().
However pass a ERR_PTR to regulator_unregister() is wrong, so we need to
explicitly set "pchip->rdev[buck_num] = NULL" before goto err_buck.

This patch also includes below cleanups:
Show correct regulator id in dev_err.
Remove __devexit_p.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-08 11:05:26 +00:00
Axel Lin 5551a6a0eb regulator: da9055: Remove unused v_shift field from struct da9055_volt_reg
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-07 11:14:53 +00:00
Axel Lin b9bb09111a regulator: lp8788-ldo: Use ldo->en_pin to check if regulator is enabled by external pin
ldo->en_pin is set iff the regulator is enabled by external pin.

This patch sets ldo->en_pin to NULL if lp8788_gpio_request_ldo_en() fails, then
we can use it to determinate if the regulator is controlled by external pin or
register.

lp8788_get_ldo_enable_mode(), lp8788_ldo_ctrl_by_extern_pin() and
lp8788_ldo_is_enabled_by_extern_pin() functions are not used now, remove them.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Milo Kim <milo.kim@ti.com>
Tested-by: Milo Kim <milo.kim@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-07 11:13:08 +00:00
Greg Kroah-Hartman 3d68dfe324 Drivers: regulator: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03 15:57:04 -08:00
Axel Lin 0384618a79 regulator: core: Fix comment for regulator_register()
regulator_register() does not return 0 on success, fix the comment.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-03 13:02:39 +00:00
Kim, Milo f02a3917b3 lp8788-ldo: fix a parent device on devm_gpio_request()
Use 'platform_device' rather than i2c client device node.
 Argument is added in lp8788_config_ldo_enable_mode().

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-03 11:28:53 +00:00
Kim, Milo 939e88f090 lp8788-ldo: fix a parent device in _probe()
The lp8788-ldo is a platform driver of lp8788-mfd.
 The platform device is allocated when mfd_add_devices() is called
 in lp8788-mfd.
 On the other hand, 'lp->dev' is the i2c client device.

 Therefore, this 'platform_device' is a proper parent device in case of
 resource managed mem alloc, registering regulators and device kernel messages.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-03 11:28:53 +00:00
Kim, Milo 1ef01e74e7 lp8788-buck: fix a for-loop coding style
Remove space before semicolon in for-loop.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-03 11:28:53 +00:00
Kim, Milo 38d8f67cb6 lp8788-buck: fix a parent device on devm_gpio_request()
Use 'platform_device' rather than i2c client device node.
 Arguments are added in lp8788_init_dvs() and lp8788_dvs_gpio_request().

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-03 11:28:52 +00:00
Kim, Milo 3b0e8f1281 lp8788-buck: fix a parent deivce in _probe()
The lp8788-buck is a platform driver of lp8788-mfd.
 The platform device is allocated when mfd_add_devices() is called
 in lp8788-mfd.
 On the other hand, 'lp->dev' is the i2c client device.

 Therefore, this 'platform_device' is a proper parent device in case of
 resource managed mem alloc, registering a regulator and device kernel message.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-03 11:28:52 +00:00
Axel Lin b79ca051bd regulator: max8997: Convert max8997_safeout_ops to set_voltage_sel and list_voltage_table
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-27 17:34:49 +00:00
Axel Lin 24bd410905 regulator: max8997: Remove set_voltage_time_sel setting for max8997_ldo_ops
max8997_set_voltage_ldobuck_time_sel() returns 0 for all LDOs.
Thus remove set_voltage_time_sel setting for max8997_ldo_ops.

max8997_set_voltage_ldobuck_time_sel() is only used for max8997_buck_ops now,
rename it to max8997_set_voltage_buck_time_sel().

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-27 17:34:49 +00:00
Laxman Dewangan c51ce403d3 regulator: tps51632: add DT support
Add DT support for the TI TPS51632. Add device binding document also.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-27 17:30:45 +00:00
Laxman Dewangan faa3b2d579 regulator: tps51632: add register property for regmap
All TPS51632 registers are not readable/writable and
non-volatiles.

Add property of the registers whether it is readable/writable
or volatile for regmap framework.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-27 17:30:45 +00:00
Axel Lin c6f0a0efb1 regulator: 88pm8607: Use apply_[reg|bit] with regmap based voltage_sel operations
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-27 17:28:25 +00:00
Axel Lin adbf7eabb6 regulator: 88pm8607: Update update_bit for BUCK2 in pm8607_set_voltage_sel
BUCK2 has the update_bit setting, but current code does not set update_bit
in pm8607_set_voltage_sel.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-27 17:28:22 +00:00
Axel Lin d645d59158 regulator: tps6586x: Use apply_[reg|bit] with regmap based voltage_sel operations
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-24 16:34:11 +00:00
Axel Lin 68f7506017 regulator: da9052: Use apply_[reg|bit] with regmap based voltage_sel operations
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-24 16:34:11 +00:00
Axel Lin c8520b4c5d regulator: core: Allow specify apply_[reg|bit] for regmap based voltage_sel operations
Some DVM regulators needs to update apply_bit after setting vsel_reg to
initiate voltage change on the output.  This patch adds apply_reg and
apply_bit to struct regulator_desc and update
regulator_set_voltage_sel_regmap() to set apply_bit of apply_reg when
apply_bit is set.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-24 16:34:11 +00:00
Daniel Jeong b59320cc5a regulator: lp8755: new driver for LP8755
This patch is for new lp8755 regulator dirver and
several unsed variables were deleted and then test was done.

LP8755 :
The LP8755 is a high performance power management unit.It contains
six step-down DC-DC converters which can can be filexibly bundled
together in multiphase converters as required by application.
www.ti.com

Signed-off-by: Daniel Jeong <gshark.jeong@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-24 16:32:34 +00:00
Axel Lin 19280e4071 regulator: core: Fix continuous_voltage_range case in regulator_can_change_voltage
Regulator drivers with continuous_voltage_range flag set allows not setting
n_voltages. Thus if continuous_voltage_range is set, check the constraint range
instead.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-24 16:30:44 +00:00
Axel Lin f38482fa70 regulator: lp3971: Convert to get_voltage_sel
regulator_list_voltage_table() returns -EINVAL if selector >= n_voltages.
Thus we don't need to check if reg is greater than BUCK_TARGET_VOL_MAX_IDX in
lp3971_dcdc_get_voltage_sel.

BUCK_TARGET_VOL_MIN_IDX and BUCK_TARGET_VOL_MAX_IDX are not used, remove them.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-24 16:26:50 +00:00
Inderpal Singh 3ef303988c regulator: s5m8767: Fix probe failure due to stack corruption
The function sec_reg_read invokes regmap_read which expects unsigned int *
as the destination address. The existing driver is passing address of local
variable "val" which is u8. This causes the stack corruption and following
dump is observed during probe.

Hence change "val" from u8 to unsigned int.

Unable to handle kernel paging request at virtual address 02410020
pgd = c0004000
[02410020] *pgd=00000000
Internal error: Oops: 80000005 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0    Not tainted  (3.6.0-00696-g98a28b18-dirty #27)
PC is at 0x2410020
LR is at _regulator_get_voltage+0x3c/0x70
pc : [<02410020>]    lr : [<c02395d4>]    psr: 20000013
sp : cf839b68  ip : 00000000  fp : cf92d410
r10: 0000cfd0  r9 : c06d9878  r8 : 0000f0a0
r7 : cf839b70  r6 : cf92d400  r5 : 00000011  r4 : cf000000
r3 : 02410020  r2 : 00000000  r1 : 00000048  r0 : cf000000
Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
...........................
.................................

[<c02395d4>] (_regulator_get_voltage+0x3c/0x70) from [<c023ad80>] (print_constraints+0x50/0x36c)
[<c023ad80>] (print_constraints+0x50/0x36c) from [<c023e504>] (set_machine_constraints+0xe8/0x2b0)
[<c023e504>] (set_machine_constraints+0xe8/0x2b0) from [<c023e9c8>] (regulator_register+0x2fc/0x604)
[<c023e9c8>] (regulator_register+0x2fc/0x604) from [<c049d628>] (s5m8767_pmic_probe+0x688/0x718)
[<c049d628>] (s5m8767_pmic_probe+0x688/0x718) from [<c029915c>] (platform_drv_probe+0x18/0x1c)
[<c029915c>] (platform_drv_probe+0x18/0x1c) from [<c0297dd0>] (really_probe+0x68/0x1f4)
[<c0297dd0>] (really_probe+0x68/0x1f4) from [<c0298070>] (driver_probe_device+0x30/0x48)

Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-24 16:24:37 +00:00
Paolo Pisati 92d7a55879 regulator: core: if voltage scaling fails, restore original voltage values
Signed-off-by: Paolo Pisati <paolo.pisati@canonical.com>
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-15 23:53:05 +09:00
Mark Brown 4ffc45c360 Merge remote-tracking branch 'regulator/topic/sm8767' into regulator-next 2012-12-11 21:44:55 +09:00
Mark Brown f3cd19c38c Merge remote-tracking branch 'regulator/topic/change' into regulator-next 2012-12-11 21:44:53 +09:00
Axel Lin 8a23b4e03d regulator: core: Fix logic to determinate if regulator can change voltage
Having a linear_min_sel setting means the first linear_min_sel selectors are
invalid. We need to subtract linear_min_sel when use n_voltages to determinate
if regulator can change voltage.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-11 21:44:23 +09:00
Mark Brown b17fc86cc5 Merge branch 'topic/min' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into regulator-change 2012-12-11 21:44:17 +09:00
Amit Daniel Kachhap 76c854d1df regulator: s5m8767: Fix to work even if no DVS gpio present
Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-11 12:44:05 +09:00
Amit Daniel Kachhap da130ab2df regulator: s5m8767: Fix to read the first DVS register.
This patch modifies the DVS register read function to select correct DVS1
register. This change is required because the GPIO select pin is 000 in
unintialized state and hence selects the DVS1 register.

Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-11 12:44:05 +09:00
Amit Daniel Kachhap 9bb096ff37 regulator: s5m8767: Fix to work when platform registers less regulators
Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-11 12:44:04 +09:00
Mark Brown bfd9155ebb Merge remote-tracking branch 'regulator/topic/gpio' into regulator-next 2012-12-10 23:14:11 +09:00
Lee Jones 3708903ee6 regulator: gpio-regulator: gpio_set_value should use cansleep
If it's possible for gpio_set_value to sleep, we should be using
the *_cansleep call instead. This patch fixes multiple warnings
from gpiolib.

Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-10 23:12:41 +09:00
Lee Jones ad0b8b9e82 regulator: gpio-regulator: Fix logical error in for() loop
The cond-statement of this particular for() loop will always be
true as long as at least one voltage-shifting GPIO is present.
If it wasn't for the break below, we'd be stuck in a forever loop.
This patch inserts the correct cond-statement into the statement.

Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-10 23:12:41 +09:00
Mark Brown 925f14dc2d Merge remote-tracking branch 'regulator/topic/wm831x' into regulator-next 2012-12-10 12:43:33 +09:00
Mark Brown 8ee005112d Merge remote-tracking branch 'regulator/topic/tps80031' into regulator-next 2012-12-10 12:43:32 +09:00
Mark Brown f1e0d5f138 Merge remote-tracking branch 'regulator/topic/tps65910' into regulator-next 2012-12-10 12:43:30 +09:00
Mark Brown 21e55ca406 Merge remote-tracking branch 'regulator/topic/tps6586x' into regulator-next 2012-12-10 12:43:29 +09:00
Mark Brown 41f5983236 Merge remote-tracking branch 'regulator/topic/tps65090' into regulator-next 2012-12-10 12:43:27 +09:00
Mark Brown f8c85fe186 Merge remote-tracking branch 'regulator/topic/tps516312' into regulator-next 2012-12-10 12:43:24 +09:00
Mark Brown 86caa905f3 Merge remote-tracking branch 'regulator/topic/s2mps11' into regulator-next 2012-12-10 12:43:19 +09:00
Mark Brown e6120461e5 Merge remote-tracking branch 'regulator/topic/palmas' into regulator-next 2012-12-10 12:43:17 +09:00
Mark Brown adca48f7c6 Merge remote-tracking branch 'regulator/topic/min' into regulator-next 2012-12-10 12:43:00 +09:00
Mark Brown 9e21867073 Merge remote-tracking branch 'regulator/topic/max8997' into regulator-next 2012-12-10 12:43:00 +09:00
Mark Brown f675649e70 Merge remote-tracking branch 'regulator/topic/max8973' into regulator-next 2012-12-10 12:42:59 +09:00
Mark Brown 9199addf4f Merge remote-tracking branch 'regulator/topic/max77686' into regulator-next 2012-12-10 12:42:58 +09:00
Mark Brown 0d2cff8b67 Merge remote-tracking branch 'regulator/topic/max1586' into regulator-next 2012-12-10 12:42:58 +09:00
Mark Brown a8bfb69e77 Merge remote-tracking branch 'regulator/topic/lp8788' into regulator-next 2012-12-10 12:42:57 +09:00
Mark Brown bdb7e45507 Merge remote-tracking branch 'regulator/topic/log' into regulator-next 2012-12-10 12:42:56 +09:00
Mark Brown 1f9cc5f771 Merge remote-tracking branch 'regulator/topic/hotplug' into regulator-next 2012-12-10 12:42:55 +09:00
Mark Brown 207f30894a Merge remote-tracking branch 'regulator/topic/gpio' into regulator-next 2012-12-10 12:42:54 +09:00
Mark Brown db58e0270c Merge remote-tracking branch 'regulator/topic/da9055' into regulator-next 2012-12-10 12:42:53 +09:00
Mark Brown 4e62cce2b6 Merge remote-tracking branch 'regulator/topic/da9052' into regulator-next 2012-12-10 12:42:53 +09:00
Mark Brown 6234427eb8 Merge remote-tracking branch 'regulator/topic/change' into regulator-next 2012-12-10 12:42:52 +09:00
Mark Brown b0e5997ef4 Merge remote-tracking branch 'regulator/topic/as3711' into regulator-next 2012-12-10 12:42:51 +09:00