Commit Graph

84 Commits

Author SHA1 Message Date
Linus Torvalds d895cb1af1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile (part one) from Al Viro:
 "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
  locking violations, etc.

  The most visible changes here are death of FS_REVAL_DOT (replaced with
  "has ->d_weak_revalidate()") and a new helper getting from struct file
  to inode.  Some bits of preparation to xattr method interface changes.

  Misc patches by various people sent this cycle *and* ocfs2 fixes from
  several cycles ago that should've been upstream right then.

  PS: the next vfs pile will be xattr stuff."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
  saner proc_get_inode() calling conventions
  proc: avoid extra pde_put() in proc_fill_super()
  fs: change return values from -EACCES to -EPERM
  fs/exec.c: make bprm_mm_init() static
  ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
  ocfs2: fix possible use-after-free with AIO
  ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
  get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
  target: writev() on single-element vector is pointless
  export kernel_write(), convert open-coded instances
  fs: encode_fh: return FILEID_INVALID if invalid fid_type
  kill f_vfsmnt
  vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
  nfsd: handle vfs_getattr errors in acl protocol
  switch vfs_getattr() to struct path
  default SET_PERSONALITY() in linux/elf.h
  ceph: prepopulate inodes only when request is aborted
  d_hash_and_lookup(): export, switch open-coded instances
  9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
  9p: split dropping the acls from v9fs_set_create_acl()
  ...
2013-02-26 20:16:07 -08:00
Linus Torvalds fffddfd6c8 Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm merge from Dave Airlie:
 "Highlights:

   - TI LCD controller KMS driver

   - TI OMAP KMS driver merged from staging

   - drop gma500 stub driver

   - the fbcon locking fixes

   - the vgacon dirty like zebra fix.

   - open firmware videomode and hdmi common code helpers

   - major locking rework for kms object handling - pageflip/cursor
     won't block on polling anymore!

   - fbcon helper and prime helper cleanups

   - i915: all over the map, haswell power well enhancements, valleyview
     macro horrors cleaned up, killing lots of legacy GTT code,

   - radeon: CS ioctl unification, deprecated UMS support, gpu reset
     rework, VM fixes

   - nouveau: reworked thermal code, external dp/tmds encoder support
     (anx9805), fences sleep instead of polling,

   - exynos: all over the driver fixes."

Lovely conflict in radeon/evergreen_cs.c between commit de0babd60d
("drm/radeon: enforce use of radeon_get_ib_value when reading user cmd")
and the new changes that modified that evergreen_dma_cs_parse()
function.

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (508 commits)
  drm/tilcdc: only build on arm
  drm/i915: Revert hdmi HDP pin checks
  drm/tegra: Add list of framebuffers to debugfs
  drm/tegra: Fix color expansion
  drm/tegra: Split DC_CMD_STATE_CONTROL register write
  drm/tegra: Implement page-flipping support
  drm/tegra: Implement VBLANK support
  drm/tegra: Implement .mode_set_base()
  drm/tegra: Add plane support
  drm/tegra: Remove bogus tegra_framebuffer structure
  drm: Add consistency check for page-flipping
  drm/radeon: Use generic HDMI infoframe helpers
  drm/tegra: Use generic HDMI infoframe helpers
  drm: Add EDID helper documentation
  drm: Add HDMI infoframe helpers
  video: Add generic HDMI infoframe helpers
  drm: Add some missing forward declarations
  drm: Move mode tables to drm_edid.c
  drm: Remove duplicate drm_mode_cea_vic()
  gma500: Fix n, m1 and m2 clock limits for sdvo and lvds
  ...
2013-02-25 16:46:44 -08:00
Nicolas Pitre a883b70d8e tty vt: fix character insertion overflow
Commit 81732c3b2f ("tty vt: Fix line garbage in virtual console on
command line edition") broke insert_char() in multiple ways.  Then
commit b1a925f44a ("tty vt: Fix a regression in command line edition")
partially fixed it.  However, the buffer being moved is still too large
and overflowing beyond the end of the current line, corrupting existing
characters on the next line.

Example test case:

echo -e "abc\nde\x1b[A\x1b[4h \x1b[4l\x1b[B"

Expected result:

ab c
de

Current result:

ab c
 e

Needless to say that this is very annoying when inserting words in the
middle of paragraphs with certain text editors.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Cc: Jean-François Moine <moinejf@free.fr>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-24 17:29:49 -08:00
Al Viro 496ad9aa8e new helper: file_inode(file)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22 23:31:31 -05:00
Dave Airlie 62cd2fa82a Merge branch 'console-fixes' into drm-next
(not the fbcon maintainer pull 2)

fix bug in vgacon on bootup and fbcon losing fonts on startup.

* console-fixes: (50 commits)
  fbcon: don't lose the console font across generic->chip driver switch
  vgacon/vt: clear buffer attributes when we load a 512 character font (v2)
2013-02-08 12:13:43 +10:00
Takashi Iwai e93a9a8687 fb: Yet another band-aid for fixing lockdep mess
I've still got lockdep warnings even after Alan's patch, and it seems that
yet more band aids are required to paper over similar paths for
unbind_con_driver() and unregister_con_driver().  After this hack, lockdep
warnings are finally gone.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: stable <stable@vger.kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-08 12:02:41 +10:00
Alan Cox 50e244cc79 fb: rework locking to fix lock ordering on takeover
Adjust the console layer to allow a take over call where the caller
already holds the locks.  Make the fb layer lock in order.

This is partly a band aid, the fb layer is terminally confused about the
locking rules it uses for its notifiers it seems.

[akpm@linux-foundation.org: remove stray non-ascii char, tidy comment]
[akpm@linux-foundation.org: export do_take_over_console()]
[airlied: cleanup another non-ascii char]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: stable <stable@vger.kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-08 12:02:40 +10:00
Dave Airlie 2a24830723 vgacon/vt: clear buffer attributes when we load a 512 character font (v2)
When we switch from 256->512 byte font rendering mode, it means the
current contents of the screen is being reinterpreted. The bit that holds
the high bit of the 9-bit font, may have been previously set, and thus
the new font misrenders.

The problem case we see is grub2 writes spaces with the bit set, so it
ends up with data like 0x820, which gets reinterpreted into 0x120 char
which the font translates into G with a circumflex. This flashes up on
screen at boot and is quite ugly.

A current side effect of this patch though is that any rendering on the
screen changes color to a slightly darker color, but at least the screen
no longer corrupts.

v2: as suggested by hpa, always clear the attribute space, whether we
are are going to or from 512 chars.

Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-07 12:37:03 +10:00
Jiri Slaby 6732c8bb86 TTY: switch tty_schedule_flip
Now, we start converting tty buffer functions to actually use
tty_port. This will allow us to get rid of the need of tty in many
call sites. Only tty_port will needed and hence no more
tty_port_tty_get in those paths.

This is the last one: tty_schedule_flip

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15 22:43:15 -08:00
Jiri Slaby 92a19f9cec TTY: switch tty_insert_flip_char
Now, we start converting tty buffer functions to actually use
tty_port. This will allow us to get rid of the need of tty in many
call sites. Only tty_port will needed and hence no more
tty_port_tty_get in those paths.

tty_insert_flip_char is the next one to proceed. This one is used all
over the code, so the patch is huge.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15 22:21:36 -08:00
Cong Ding 92b336f6af tty: vt/Makefile: set the variables to static
tty: vt/Makefile: set the variables to static

In the file drivers/tty/vt/defkeymap.c generated by command
loadkeys --mktable defkeymap.map > defkeymap.c
the 6 variables: shift_map, altgr_map, ctrl_map, shift_ctrl_map, alt_map,
and ctrl_alt_map should be static because they are used only in this file.
There is no reason to remove the static by sed command.

Signed-off-by: Cong Ding <dinggnu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15 21:52:24 -08:00
Linus Torvalds c6bd5bcc49 TTY/Serial merge for 3.8-rc1
Here's the big tty/serial tree set of changes for 3.8-rc1.
 
 Contained in here is a bunch more reworks of the tty port layer from Jiri and
 bugfixes from Alan, along with a number of other tty and serial driver updates
 by the various driver authors.
 
 Also, Jiri has been coerced^Wconvinced to be the co-maintainer of the TTY
 layer, which is much appreciated by me.
 
 All of these have been in the linux-next tree for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlDHhgwACgkQMUfUDdst+ynI6wCcC+YeBwncnoWHvwLAJOwAZpUL
 bysAn28o780/lOsTzp3P1Qcjvo69nldo
 =hN/g
 -----END PGP SIGNATURE-----

Merge tag 'tty-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull TTY/Serial merge from Greg Kroah-Hartman:
 "Here's the big tty/serial tree set of changes for 3.8-rc1.

  Contained in here is a bunch more reworks of the tty port layer from
  Jiri and bugfixes from Alan, along with a number of other tty and
  serial driver updates by the various driver authors.

  Also, Jiri has been coerced^Wconvinced to be the co-maintainer of the
  TTY layer, which is much appreciated by me.

  All of these have been in the linux-next tree for a while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fixed up some trivial conflicts in the staging tree, due to the fwserial
driver having come in both ways (but fixed up a bit in the serial tree),
and the ioctl handling in the dgrp driver having been done slightly
differently (staging tree got that one right, and removed both
TIOCGSOFTCAR and TIOCSSOFTCAR).

* tag 'tty-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (146 commits)
  staging: sb105x: fix potential NULL pointer dereference in mp_chars_in_buffer()
  staging/fwserial: Remove superfluous free
  staging/fwserial: Use WARN_ONCE when port table is corrupted
  staging/fwserial: Destruct embedded tty_port on teardown
  staging/fwserial: Fix build breakage when !CONFIG_BUG
  staging: fwserial: Add TTY-over-Firewire serial driver
  drivers/tty/serial/serial_core.c: clean up HIGH_BITS_OFFSET usage
  staging: dgrp: dgrp_tty.c: Audit the return values of get/put_user()
  staging: dgrp: dgrp_tty.c: Remove the TIOCSSOFTCAR ioctl handler from dgrp driver
  serial: ifx6x60: Add modem power off function in the platform reboot process
  serial: mxs-auart: unmap the scatter list before we copy the data
  serial: mxs-auart: disable the Receive Timeout Interrupt when DMA is enabled
  serial: max310x: Setup missing "can_sleep" field for GPIO
  tty/serial: fix ifx6x60.c declaration warning
  serial: samsung: add devicetree properties for non-Exynos SoCs
  serial: samsung: fix potential soft lockup during uart write
  tty: vt: Remove redundant null check before kfree.
  tty/8250 Add check for pci_ioremap_bar failure
  tty/8250 Add support for Commtech's Fastcom Async-335 and Fastcom Async-PCIe cards
  tty/8250 Add XR17D15x devices to the exar_handle_irq override
  ...
2012-12-11 14:08:47 -08:00
Sachin Kamat daa74a25cc tty: vt: Remove redundant null check before kfree.
kfree on a NULL pointer is a no-op.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-26 15:36:38 -08:00
Jean-François Moine b1a925f44a tty vt: Fix a regression in command line edition
The commit 81732c3b2f
("Fix line garbage in virtual console on command line edition")
made a regression with some machines: some characters were not erased
after line edition.

This patch adjusts the number of moved characters and the size of the
region to be updated.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Tested-by: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 16:45:32 -08:00
Josh Triplett a5e04b760a drivers/tty/vt/vt_ioctl.c: Include <linux/suspend.h> for pm_set_vt_switch
C files should include the header files that prototype their functions.
This keeps the types in sync, and eliminates warnings from GCC
(-Wmissing-prototypes) and Sparse (-Wdecl).

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21 15:19:52 -08:00
Jiri Slaby 191c5f1027 TTY: call tty_port_destroy in the rest of drivers
After commit "TTY: move tty buffers to tty_port", the tty buffers are
not freed in some drivers. This is because tty_port_destructor is not
called whenever a tty_port is freed. This was an assumption I counted
with but was unfortunately untrue. So fix the drivers to fulfil this
assumption.

To be sure, the TTY buffers (and later some stuff) are gone along with
the tty_port, we have to call tty_port_destroy at tear-down places.
This is mostly where the structure containing a tty_port is freed.
This patch does exactly that -- put tty_port_destroy at those places.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-15 17:20:58 -08:00
Jiri Slaby 7ee00fdb16 TTY: vt, fix paste_selection ldisc handling
There used to be a single tty_ldisc_ref_wait. But then, when a
big-tty-mutex (BTM) was introduced, it has to be tty_ldisc_ref +
tty_unlock + tty_ldisc_ref_wait + tty_lock. Later, BTM was removed
from that path and tty_ldisc_ref + tty_ldisc_ref_wait remained there.
But it makes no sense now. So leave there only tty_ldisc_ref_wait.

And when we have a reference to an ldisc, actually use it in the loop.
Otherwise it may be racy.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-22 16:50:53 -07:00
Linus Torvalds 6c536a17fa KGDB/KDB fixes and cleanups
Cleanups
    Clean up compile warnings in kgdboc.c and x86/kernel/kgdb.c
    Add module event hooks for simplified debugging with gdb
  Fixes
    Fix kdb to stop paging with 'q' on bta and dmesg
    Fix for data that scrolls off the vga console due to line wrapping
      when using the kdb pager
  New
    The debug core registers for kernel module events which allows a
      kernel aware gdb to automatically load symbols and break on entry
      to a kernel module
    Allow kgdboc=kdb to setup kdb on the vga console
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQeB8KAAoJEIciOldedpOjpbIP/j+LXEkzXKKfi/3m79VQ87DB
 5iUmTS84t84pomHamXX175AC0gA/2mC0FbbcHpqjlhxF4awXcviCNIiTdtSOTbbu
 G102naLHY8i77X+XbHuN2utJeaRLw8rsfMMZGmjJnjfpc4LtsaH0YTkUzbt3qvba
 N6/QvknadzIrmoCJvHipdOdsSmL0YmTS22+koG4es9B5jvOqVH/W7jZs1qRlVw96
 VxG5Psx4LPB+RI+ZwF1WwbGxbtqKGwkVvkcGG1XIW7FQojHmjw+vUERQCjoFueJ5
 NkKfus98j85/+MvSTkWx3L1K46MHMCFbtJs9RWftJ8GtoNNnm7GDxasoIG2bJKyG
 HFD3IGPuKAokE/equF3eGTRHeEM0IUGwT3EnBqdKd73zud27WsHaSqC/1CPR+74v
 ojLQ2ft1QF+pEkGrhRTdQpLyVnvEmxu8q+j9z9n/HlGEVv8kZ6LGxDPjWB+um/Yi
 Cs0XAryYrL5gE5O+Vwna61luughtIYJwR7+DeVxnQYJ43x/0MtN/SoURnwvrCTEo
 9FeoMgZm1nLh6EW29ahIT/hMu4f0sM91Kiwrmc/zEWZgoB++wo1n470qQmUUrOx4
 CPD7zdmDrf6YxDG2QTHjCtVErO4aJ5zN4Dq0+YyodV545SZVn3t4qBDTVvKhq4Y6
 NIhZAxrv5RKABwtLcP9E
 =uf0L
 -----END PGP SIGNATURE-----

Merge tag 'for_linus-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb

Pull KGDB/KDB fixes and cleanups from Jason Wessel:
 "Cleanups
   - Clean up compile warnings in kgdboc.c and x86/kernel/kgdb.c
   - Add module event hooks for simplified debugging with gdb
 Fixes
   - Fix kdb to stop paging with 'q' on bta and dmesg
   - Fix for data that scrolls off the vga console due to line wrapping
     when using the kdb pager
 New
   - The debug core registers for kernel module events which allows a
     kernel aware gdb to automatically load symbols and break on entry
     to a kernel module
   - Allow kgdboc=kdb to setup kdb on the vga console"

* tag 'for_linus-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb:
  tty/console: fix warnings in drivers/tty/serial/kgdboc.c
  kdb,vt_console: Fix missed data due to pager overruns
  kdb: Fix dmesg/bta scroll to quit with 'q'
  kgdboc: Accept either kbd or kdb to activate the vga + keyboard kdb shell
  kgdb,x86: fix warning about unused variable
  mips,kgdb: fix recursive page fault with CONFIG_KPROBES
  kgdb: Add module event hooks
2012-10-13 11:16:58 +09:00
Jason Wessel 17b572e820 kdb,vt_console: Fix missed data due to pager overruns
It is possible to miss data when using the kdb pager.  The kdb pager
does not pay attention to the maximum column constraint of the screen
or serial terminal.  This result is not incrementing the shown lines
correctly and the pager will print more lines that fit on the screen.
Obviously that is less than useful when using a VGA console where you
cannot scroll back.

The pager will now look at the kdb_buffer string to see how many
characters are printed.  It might not be perfect considering you can
output ASCII that might move the cursor position, but it is a
substantially better approximation for viewing dmesg and trace logs.

This also means that the vt screen needs to set the kdb COLUMNS
variable.

Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2012-10-12 06:37:35 -05:00
Jean-François Moine 81732c3b2f tty vt: Fix line garbage in virtual console on command line edition
On some machines using a specific hardware for console screen output,
the update of the pixel frame buffer does not work correctly when
using command line edition. This may be due to a memory cache bug
in the machine on which the problem has been found, but an other
solution is possible.

This patch proposes to avoid touching directly the pixel frame buffer
and to rebuild each character using the standard putc() function
on command line edition.

The resulting code is smaller and not obviously slower (no read
access to the pixel frame buffer).

Tested on a Cubox (ARM Marvell Dove 88AP510 SoC).

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-10 16:35:46 -07:00
Rabin Vincent a7b12929be vt: fix race in vt_waitactive()
pm_restore_console() is called from the suspend/resume path, and this
calls vt_move_to_console(), which calls vt_waitactive().

There's a race in this path which causes the process which requests the
suspend to sleep indefinitely waiting for an event which already
happened:

P1                                      P2
 vt_move_to_console()
  set_console()
    schedule_console_callback()
  vt_waitactive()
    check n == fg_console +1
                                       console_callback()
                                         switch_screen()
                                         vt_event_post() // no waiters

    vt_event_wait() // forever

Fix the race by ensuring we're registered for the event before we check
if it's already completed.

Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-26 13:37:02 -07:00
Alan Cox 36b3c070d2 tty: Move the handling of the tty release logic
Now that we don't have tty->termios tied to drivers->tty we can untangle
the logic here. In addition we can push the removal logic out of the
destructor path.

At that point we can think about sorting out tty_port and console and all
the other ugly hangovers.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-17 09:13:38 -07:00
Alan Cox 3db1ddb725 vt: fix the keyboard/led locking
We touch the LED from both keyboard callback and direct paths. In
one case we've got the lock held way up the call chain and in the
other we haven't. This leads to complete insanity so fix it by giving
the LED bits their own lock.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-17 09:13:37 -07:00
Alan Cox adc8d746ca tty: move the termios object into the tty
This will let us sort out a whole pile of tty related races. The
alternative would be to keep points and refcount the termios objects.
However
1. They are tiny anyway
2. Many devices don't use the stored copies
3. We can remove a pty special case

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-16 13:00:41 -07:00
Christopher Brannon 157a4b311c tty: keyboard.c: Remove locking from vt_get_leds.
There are three call sites for this function, and all three
are called within a keyboard handler.
kbd_event_lock is already held within keyboard handlers,
so attempting to lock it in vt_get_leds causes deadlock.

Signed-off-by: Christopher Brannon <chris@the-brannons.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-06 14:28:17 -07:00
Rabin Vincent 2fc46915ec vt: fix race in vt_waitactive()
pm_restore_console() is called from the suspend/resume path, and this
calls vt_move_to_console(), which calls vt_waitactive().

There's a race in this path which causes the process which requests the
suspend to sleep indefinitely waiting for an event which already
happened:

P1                                      P2
 vt_move_to_console()
  set_console()
    schedule_console_callback()
  vt_waitactive()
    check n == fg_console +1
                                       console_callback()
                                         switch_screen()
                                         vt_event_post() // no waiters

    vt_event_wait() // forever

Fix the race by ensuring we're registered for the event before we check
if it's already completed.

Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-14 17:10:08 -07:00
Jiri Slaby bc1e99d93f TTY: vt, add ->install
We need to initialize the console only on the first open. This is
usually what is done in the ->install hook. vt used to do this in
->open. Now we move it to ->install and use newly added helper for
install: tty_port_install. It ensures tty->port to be set properly.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13 17:30:53 -07:00
Jiri Slaby 4c2ef53d3b TTY: vt, remove con_schedule_flip
This is identical to tty_schedule_flip. So let us use that instead.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13 17:30:53 -07:00
Linus Torvalds 44bc40e148 Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform changes from Ingo Molnar:
 "This tree includes assorted platform driver updates and a preparatory
  series for a platform with custom DMA remapping semantics (sta2x11 I/O
  hub)."

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vsmp: Fix number of CPUs when vsmp is disabled
  keyboard: Use BIOS Keyboard variable to set Numlock
  x86/olpc/xo1/sci: Report RTC wakeup events
  x86/olpc/xo1/sci: Produce wakeup events for buttons and switches
  x86, platform: Initial support for sta2x11 I/O hub
  x86: Introduce CONFIG_X86_DMA_REMAP
  x86-32: Introduce CONFIG_X86_DEV_DMA_OPS
2012-05-23 11:16:40 -07:00
Linus Torvalds 94b5aff4c6 TTY pull request for 3.5-rc1
Here's the big TTY/serial driver pull request for the 3.5-rc1 merge window.
 
 Nothing major in here, just lots of incremental changes from Alan and
 Jiri reworking some tty core things to behave better and to get a more
 solid grasp on some of the nasty tty locking issues.
 
 There are a few tty and serial driver updates in here as well.
 
 All of this has been in the linux-next releases for a while with no problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAk+7rBoACgkQMUfUDdst+ykXsgCfeDKx6ZgLidYy3H40Y2Pt3XEO
 TicAn1fcdGwOmMR/mowa+kTA68D/J6i2
 =S7tG
 -----END PGP SIGNATURE-----

Merge tag 'tty-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull TTY updates from Greg Kroah-Hartman:
 "Here's the big TTY/serial driver pull request for the 3.5-rc1 merge
  window.

  Nothing major in here, just lots of incremental changes from Alan and
  Jiri reworking some tty core things to behave better and to get a more
  solid grasp on some of the nasty tty locking issues.

  There are a few tty and serial driver updates in here as well.

  All of this has been in the linux-next releases for a while with no
  problems.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'tty-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (115 commits)
  serial: bfin_uart: Make MMR access compatible with 32 bits bf609 style controller.
  serial: bfin_uart: RTS and CTS MMRs can be either 16-bit width or 32-bit width.
  serial: bfin_uart: narrow the reboot condition in DMA tx interrupt
  serial: bfin_uart: Adapt bf5xx serial driver to bf60x serial4 controller.
  Revert "serial_core: Update buffer overrun statistics."
  tty: hvc_xen: NULL dereference on allocation failure
  tty: Fix LED error return
  tty: Allow uart_register/unregister/register
  tty: move global ldisc idle waitqueue to the individual ldisc
  serial8250-em: Add DT support
  serial8250-em: clk_get() IS_ERR() error handling fix
  serial_core: Update buffer overrun statistics.
  tty: drop the pty lock during hangup
  cris: fix missing tty arg in wait_event_interruptible_tty call
  tty/amiserial: Add missing argument for tty_unlock()
  tty_lock: Localise the lock
  pty: Lock the devpts bits privately
  tty_lock: undo the old tty_lock use on the ctty
  serial8250-em: Emma Mobile UART driver V2
  Add missing call to uart_update_timeout()
  ...
2012-05-22 16:12:24 -07:00
Alan Cox eea41aee2b tty: Fix LED error return
3.4-rc introduced a regression when setting the LEDS. We do the right thing
but then return an error code.

Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=43144
Reported-by: Christian Casteyde
Signed-off-by: Alan Cox <alan@linux/intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-14 10:43:24 -07:00
Alan Cox 05f843b5d3 tty: Fix LED error return
3.4-rc introduced a regression when setting the LEDS. We do the right thing
but then return an error code.

Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=43144
Reported-by: Christian Casteyde
Signed-off-by: Alan Cox <alan@linux/intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14 09:04:28 -07:00
Joshua Cov b2d0b7a061 keyboard: Use BIOS Keyboard variable to set Numlock
The PC BIOS does provide a NUMLOCK flag containing the desired state
of this LED. This patch sets the current state according to the data
in the bios.

[ hpa: fixed __weak declaration without definition, changed "inline"
  to "static inline" ]

Signed-Off-By: Joshua Cov <joshuacov@googlemail.com>
Link: http://lkml.kernel.org/r/CAKL7Q7rvq87TNS1T_Km8fW_5OzS%2BSbYazLXKxW-6ztOxo3zorg@mail.gmail.com
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-05-08 14:19:41 -07:00
Alan Cox 84f904ecd3 vt: Fix deadlock on scroll-lock
Fixing the locking accidentally replaced a race in the scroll
lock handling with a deadlock. Turn it back into a race for
now.

The basic problem is that there are two paths into the tty
stop/start helpers. One via the tty layer ^S/^Q handling
where we need to take the kbd_event_lock and one via the
special keyboard handler for fn_hold where we already hold
it. Probably we need to split out into a separate LED lock
but for now just go back to the race as it's a bit close
to release.

Reported-by: Clemens Ladisch <clemens@ladisch.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01 14:01:28 -04:00
Alan Cox 5d1a33fa55 vt: push the tty_lock down into the map handling
When we do this it becomes clear the lock we should be holding is the vc
lock, and in fact many of our other helpers are properly invoked this way.

We don't at this point guarantee not to race the keyboard code but the results
of that appear harmless and that was true before we started as well.

We now have no users of tty_lock in the console driver...

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-24 16:14:14 -07:00
Greg Kroah-Hartman 665ab0f3c8 Merge 3.4-rc3 into tty-next
This allows us to pick up some changes needed for other serial patches.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18 15:57:31 -07:00
Michael Gehring 871bdea6f8 tty/vt: handle bad user buffer in {G,P}IO_CMAP ioctl
set_get_cmap() ignored the result of {get,put}_user(), causing ioctl(vt,
{G,P}IO_CMAP, 0xdeadbeef) to silently fail.

Another side effect of this: calling the PIO_CMAP ioctl with an invalid
buffer would zero the default colormap and the palette for all vts (all
colors set to black).

Leave the default colormap intact and return -EFAULT when
reading/writing to the userspace buffer fails.

Signed-off-by: Michael Gehring <mg@ebfe.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-09 12:10:23 -07:00
Kay Sievers 5da527aafe printk(): add KERN_CONT where needed in hpet and vt code
A prototype for kmsg records instead of a byte-stream buffer revealed
a couple of missing printk(KERN_CONT ...) uses. Subsequent calls produce
one record per printk() call, while all should have ended up in a single
record.

Instead of:
  ACPI: (supports S0 S5)
  ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
  hpet0: at MMIO 0xfed00000, IRQs 2 , 8 , 0

It prints:
  ACPI: (supports S0
   S5
  )
  ACPI: PCI Interrupt Link [LNKA] (IRQs
   5
   *10
   11
  )
  hpet0: at MMIO 0xfed00000, IRQs
   2
  , 8
  , 0

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-09 10:30:39 -07:00
David Howells 9ffc93f203 Remove all #inclusions of asm/system.h
Remove all #inclusions of asm/system.h preparatory to splitting and killing
it.  Performed with the following command:

perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *`

Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-28 18:30:03 +01:00
Liz Clark 4a4c61b7ce TTY: Wrong unicode value copied in con_set_unimap()
Bugzilla 40012: PIO_UNIMAP bug: error updating Unicode-to-font map
https://bugzilla.kernel.org/show_bug.cgi?id=40012

The unicode font map for the virtual console is a 32x32x64 table which
allocates rows dynamically as entries are added.  The unicode value
increases sequentially and should count all entries even in empty
rows.  The defect is when copying the unicode font map in con_set_unimap(),
the unicode value is not incremented properly.  The wrong unicode value
is entered in the new font map.

Signed-off-by: Liz Clark <liz.clark@hp.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-15 13:28:52 -07:00
Dan Carpenter 82896210aa vt: NULL dereference in vt_do_kdsk_ioctl()
We forgot to set the "key_map" variable here, so it's still NULL.  This
was introduced recently in 079c9534a9 "vt:tackle kbd_table".

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12 10:21:55 -07:00
Jiri Slaby 2f16669d32 TTY: remove re-assignments to tty_driver members
All num, magic and owner are set by alloc_tty_driver. No need to
re-set them on each allocation site.

pti driver sets something different to what it passes to
alloc_tty_driver. It is not a bug, since we don't use the lines
parameter in any way. Anyway this is fixed, and now we do the right
thing.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08 11:37:58 -08:00
Alan Cox 5289475d13 vt: tackle the main part of the selection logic
We leave the existing paste mess alone and just fix up the vt side of
things.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08 11:11:39 -08:00
Alan Cox 99cceb4e50 vt: waitevent is self locked so drop the tty_lock
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08 11:10:28 -08:00
Alan Cox 20f62579dc vt: push down tioclinux cases
Some of this ventures into selection which is still a complete lost cause. We
are not making it any worse. It's completely busted anyway.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08 11:10:27 -08:00
Alan Cox 4001d7b7fc vt: push down the tty lock so we can see what is left to tackle
At this point we have the tty_lock guarding a couple of oddities, plus the
translation and unimap still.

We also extend the console_lock in a couple of spots where coverage is wrong
and switch vcs_open to use the right lock !

[Fixed the locking issue Jiri reported]

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08 11:10:27 -08:00
Alan Cox edab558feb vt: sort out locking for font handling
The font methods are console_lock covered. Unfortunately they don't extend
the lock over all the needed tests.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08 11:10:27 -08:00
Alan Cox 079c9534a9 vt:tackle kbd_table
Keyboard struct lifetime is easy, but the locking is not and is completely
ignored by the existing code. Tackle this one head on

- Make the kbd_table private so we can run down all direct users
- Hoick the relevant ioctl handlers into the keyboard layer
- Lock them with the keyboard lock so they don't change mid keypress
- Add helpers for things like console stop/start so we isolate the poking
  around properly
- Tweak the braille console so it still builds

There are a couple of FIXME locking cases left for ioctls that are so hideous
they should be addressed in a later patch. After this patch the kbd_table is
private and all the keyboard jiggery pokery is in one place.

This update fixes speakup and also a memory leak in the original.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08 10:50:35 -08:00
Greg Kroah-Hartman 6623d64021 tty: keyboard.c: add uaccess.h to fix a build problem on sparc32
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-27 15:18:56 -08:00
Alan Cox 6aeed479fd vt: tidy a few bits of checkpatch noise
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24 13:59:35 -08:00